aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-16gpiolib: provide generic request/free implementationsJonas Gorski2-0/+26
Provide generic request/free implementations that pinctrl aware gpio drivers can use instead of open coding if they use a 1:1 pin to gpio signal mapping. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-16gpio: omap: fix static checker warningGrygorii Strashko1-1/+1
This patch fixes below static checker warning by changing type of irq field in struct gpio_bank from u16 to int. drivers/gpio/gpio-omap.c:1191 omap_gpio_probe() warn: assigning (-6) to unsigned variable 'bank->irq' drivers/gpio/gpio-omap.c 1188 bank->irq = platform_get_irq(pdev, 0); 1189 if (bank->irq <= 0) { bank->irq is u16. 1190 if (!bank->irq) 1191 bank->irq = -ENXIO; Does not work. 1192 if (bank->irq != -EPROBE_DEFER) Does not work. 1193 dev_err(dev, 1194 "can't get irq resource ret=%d\n", bank->irq); 1195 return bank->irq; 1196 } Fixes: commit 89d18e3af8b9: "gpio: omap: switch to use platform_get_irq" Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-15gpio: pl061: assign the apropriate handler for irqsLinus Walleij1-5/+25
The PL061 can handle level IRQs and edge IRQs, however it is just utilizing handle_simple_irq() for all IRQs. Inspired by Stefan Agners patch to vf610, this assigns the right handler depending on what type is set up, and after this handle_bad_irq() is only used as default and if the type is not specified, as is done in the OMAP driver: defining the IRQ type is really not optional for this driver. The interrupt handler was just writing the interrupt clearing register for all lines that were high when entering the handling loop, this is wrong: that register is only supposed to be written (on a per-line basis) for edge IRQs, so this ACK was moved to the .irq_ack() callback as is proper. Tested with PL061 on the ARM RealView PB11MPCore and the MMC/SC card detect GPIO. Cc: Jonas Gorski <jogo@openwrt.org> Cc: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-15gpio: pl061: returning with lock held in pl061_irq_type()Dan Carpenter1-6/+7
We were returning with "chip->lock" held by mistake. It's safe to move the return to before we take the spinlock. Fixes: 1dbf7f299f90 ('gpio: pl061: detail IRQ trigger handling') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05Revert "gpio-sysfs: Use gpio descriptor name instead of gpiochip names array"Linus Walleij1-1/+7
This reverts commit ddd5404007b8496f20ad2efe1147e102e6226634. We need to preserve only using this naming strategy for names coming from chip->names[], the descripor->name field is for the new interface.
2015-10-05gpio: pca953x: support ACPI devices found on Galileo Gen2Andy Shevchenko1-1/+20
This patch adds a support of the expandes found on Intel Galileo Gen2 board. The platform information comes from ACPI. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05gpio: pca953x: store driver_data for future useAndy Shevchenko1-7/+10
Instead of using id->driver_data directly we copied it to the internal structure. This will help to adapt driver for ACPI use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05gpio: generic: use error pointersHeiner Kallweit1-35/+21
Use the ERRPTR standard way to return an error code in a pointer thus simplifiying the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05gpio: generic: modernize remappingHeiner Kallweit1-11/+3
Replace devm_request_mem_region / devm_ioremap with devm_ioremap_resource. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-05gpio: generic: improve error handling in bgpio_mapHeiner Kallweit1-3/+5
If bgpio_map returns NULL then err should always be set. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: pca953x: Add TI TCA9539 supportThierry Reding2-0/+2
The TCA9539 is almost identical to the PCA9555 and software-compatible with this driver. It exposes 16 general purpose I/O pins in two 8-bit configurations. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: max730x: eliminate double freeJulia Lawall1-1/+0
The function __max730x_remove is called from the remove functions of drivers/gpio/gpio-max7300.c and drivers/gpio/gpio-max7301.c. In both cases, the probe function allocates ts using devm_kzalloc. Explicitly freeing such a value with kfree will cause a double free. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: omap: convert to use generic irq handlerGrygorii Strashko1-28/+27
This patch converts TI OMAP GPIO driver to use generic irq handler instead of chained IRQ handler. This way OMAP GPIO driver will be compatible with RT kernel where it will be forced thread IRQ handler while in non-RT kernel it still will be executed in HW IRQ context. As part of this change the IRQ wakeup configuration is applied to GPIO Bank IRQ as it now will be under control of IRQ PM Core during suspend. There are also additional benefits: - on-RT kernel there will be no complains any more about PM runtime usage in atomic context "BUG: sleeping function called from invalid context"; - GPIO bank IRQs will appear in /proc/interrupts and its usage statistic will be visible; - GPIO bank IRQs could be configured through IRQ proc_fs interface and, as result, could be a part of IRQ balancing process if needed; - GPIO bank IRQs will be under control of IRQ PM Core during suspend to RAM. Disadvantage: - additional runtime overhed as call chain till omap_gpio_irq_handler() will be longer now - necessity to use wa_lock in omap_gpio_irq_handler() to W/A warning in handle_irq_event_percpu() WARNING: CPU: 1 PID: 35 at kernel/irq/handle.c:149 handle_irq_event_percpu+0x51c/0x638() This patch doesn't fully follows recommendations provided by Sebastian Andrzej Siewior [1], because It's required to go through and check all GPIO IRQ pin states as fast as possible and pass control to handle_level_irq or handle_edge_irq. handle_level_irq or handle_edge_irq will perform actions specific for IRQ triggering type and wakeup corresponding registered threaded IRQ handler (at least it's expected to be threaded). IRQs can be lost if handle_nested_irq() will be used, because excecution time of some pin specific GPIO IRQ handler can be very significant and require accessing ext. devices (I2C). Idea of such kind reworking was also discussed in [2]. [1] http://www.spinics.net/lists/linux-omap/msg120665.html [2] http://www.spinics.net/lists/linux-omap/msg119516.html Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Austin Schuh <austin@peloton-tech.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: omap: move pm runtime in irq_chip.irq_bus_lock/sync_unlockGrygorii Strashko1-10/+15
The PM runtime API can't be used in atomic contex on -RT even if it's configured as irqsafe. As result, below error report can be seen when PM runtime API called from IRQ chip's callbacks irq_startup/irq_shutdown/irq_set_type, because they are protected by RAW spinlock: BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917 in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: insmod 3 locks held by insmod/96: #0: (&dev->mutex){......}, at: [<c04752c8>] __driver_attach+0x54/0xa0 #1: (&dev->mutex){......}, at: [<c04752d4>] __driver_attach+0x60/0xa0 #2: (class){......}, at: [<c00a408c>] __irq_get_desc_lock+0x60/0xa4 irq event stamp: 1834 hardirqs last enabled at (1833): [<c06ab2a4>] _raw_spin_unlock_irqrestore+0x88/0x90 hardirqs last disabled at (1834): [<c06ab068>] _raw_spin_lock_irqsave+0x2c/0x64 softirqs last enabled at (0): [<c003d220>] copy_process.part.52+0x410/0x19d8 softirqs last disabled at (0): [< (null)>] (null) Preemption disabled at:[< (null)>] (null) CPU: 1 PID: 96 Comm: insmod Tainted: G W O 4.1.3-rt3-00618-g57e2387-dirty #184 Hardware name: Generic DRA74X (Flattened Device Tree) [<c00190f4>] (unwind_backtrace) from [<c0014734>] (show_stack+0x20/0x24) [<c0014734>] (show_stack) from [<c06a62ec>] (dump_stack+0x88/0xdc) [<c06a62ec>] (dump_stack) from [<c006ca44>] (___might_sleep+0x198/0x2a8) [<c006ca44>] (___might_sleep) from [<c06ab6d4>] (rt_spin_lock+0x30/0x70) [<c06ab6d4>] (rt_spin_lock) from [<c04815ac>] (__pm_runtime_resume+0x68/0xa4) [<c04815ac>] (__pm_runtime_resume) from [<c04123f4>] (omap_gpio_irq_type+0x188/0x1d8) [<c04123f4>] (omap_gpio_irq_type) from [<c00a64e4>] (__irq_set_trigger+0x68/0x130) [<c00a64e4>] (__irq_set_trigger) from [<c00a7bc4>] (irq_set_irq_type+0x44/0x6c) [<c00a7bc4>] (irq_set_irq_type) from [<c00abbf8>] (irq_create_of_mapping+0x120/0x174) [<c00abbf8>] (irq_create_of_mapping) from [<c0577b74>] (of_irq_get+0x48/0x58) [<c0577b74>] (of_irq_get) from [<c0540a14>] (i2c_device_probe+0x54/0x15c) [<c0540a14>] (i2c_device_probe) from [<c04750dc>] (driver_probe_device+0x184/0x2c8) [<c04750dc>] (driver_probe_device) from [<c0475310>] (__driver_attach+0x9c/0xa0) [<c0475310>] (__driver_attach) from [<c0473238>] (bus_for_each_dev+0x7c/0xb0) [<c0473238>] (bus_for_each_dev) from [<c0474af4>] (driver_attach+0x28/0x30) [<c0474af4>] (driver_attach) from [<c0474760>] (bus_add_driver+0x154/0x200) [<c0474760>] (bus_add_driver) from [<c0476348>] (driver_register+0x88/0x108) [<c0476348>] (driver_register) from [<c0541600>] (i2c_register_driver+0x3c/0x90) [<c0541600>] (i2c_register_driver) from [<bf003018>] (pcf857x_init+0x18/0x24 [gpio_pcf857x]) [<bf003018>] (pcf857x_init [gpio_pcf857x]) from [<c000998c>] (do_one_initcall+0x128/0x1e8) [<c000998c>] (do_one_initcall) from [<c06a4220>] (do_init_module+0x6c/0x1bc) [<c06a4220>] (do_init_module) from [<c00dd0c8>] (load_module+0x18e8/0x21c4) [<c00dd0c8>] (load_module) from [<c00ddaa0>] (SyS_init_module+0xfc/0x158) [<c00ddaa0>] (SyS_init_module) from [<c000ff40>] (ret_fast_syscall+0x0/0x54) The IRQ chip interface defines only two callbacks which are executed in non-atomic contex - irq_bus_lock/irq_bus_sync_unlock, so lets move PM runtime calls there. Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Austin Schuh <austin@peloton-tech.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: add DT bindings for existing consumer flagsLinus Walleij2-2/+27
It is customary for GPIO controllers to support open drain/collector and open source/emitter configurations. Add standard GPIO line flags to account for this and augment the documentation to say that these are the most generic bindings. Several people approached me to add new flags to the lines, and this makes sense, but let's first bind up the most common cases before we start to add exotic stuff. Thanks to H. Nikolaus Schaller for ideas on how to encode single-ended wiring such as open drain/source and open collector/emitter. Cc: Tony Lindgren <tony@atomide.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: add GPIO support for IT87xx, replacing gpio-it8761eDiego Elio Pettenò4-235/+422
This patch adds support for the GPIOs found on the ITE super-I/O chips IT87xx. Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu> Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: gpiolib: don't compare an unsigned for >= 0Dirk Behme1-3/+1
The parameter offset is an unsigned, so it makes no sense to compare it for >= 0. Fix the compiler warning regarding this by removing this comparison. As the macro GPIO_OFFSET_VALID is only used at this single place, simplify the code by dropping the macro completely and dropping the invert, too. No functional change. Signed-off-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: arizona: add support for WM8998 and WM1814Richard Fitzgerald1-0/+2
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: Fix error checking in the function device_pca957x_initNicholas Krause1-2/+6
This fixes error checking in the function device_pca957x_init to properly check and return error code values from the calls to the function pca953x_write_regs if they fail as to properly signal callers when a error occurs due a failure when writing registers for this gpio based device. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: ath79: Convert to the state container design patternAlban Bedel1-59/+60
Turn the ath79 driver into a true driver supporting multiple instances. While at it also removed unneed includes and make use of the BIT() macro. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: msm: Remove unused driverStephen Boyd4-488/+0
Remove this driver now that Bjorn has introduced a pinctrl driver for msm8660 and the dts files have been updated with the pinctrl compatibles. Cc: Andy Gross <agross@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: zynq: use container_of() to get state containerLinus Walleij1-10/+22
The state container of the Zynq GPIO driver is sometimes extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct zynq_gpio is 0, so the container_of() is in practice a noop. However if a member is added to struct zynq_gpio in front of struct gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Also replace some explicit container_of() calls with the helper function. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ezra Savard <ezra.savard@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: vf610: use container_of() to get state containerLinus Walleij1-10/+19
The state container of the vf610 GPIO driver is sometimes extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct vf610_gpio_port is 0, so the container_of() is in practice a noop. However if a member is added to struct vf610_gpio_port in front of struct gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Also replace some explicit container_of() calls with the helper function. Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: sx150x: use container_of() to get state containerLinus Walleij1-17/+14
The state container of the sx150x GPIO driver is sometimes extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct sx150x_chip is 0, so the container_of() is in practice a noop. However if a member is added to struct sx150_chip in front of struct gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Cc: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: altera: use container_of() to get state containerLinus Walleij1-5/+10
The state container of the Altera GPIO driver is extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct of_mm_gpio_chip are both 0, so the container_of() is in practice a noop. However if a member is added to struct altera_gpio_chip in front of struct of_mm_gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: etraxfs: use container_of() to get state containerLinus Walleij1-6/+17
The state container of the etraxfs GPIO driver is extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct bgpio_chip are both 0, so the container_of() is in practice a noop. However if a member is added to struct etraxfs_gpio_chip in front of struct bgpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Acked-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: pl061: detail IRQ trigger handlingLinus Walleij1-8/+47
I couldn't follow this code flow. Make it dirt simple to figure out what is going on and get proper debug prints. Warn if we set up an IRQ without any trigger. Should make no semantic difference. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24gpio: keep the GPIO line names internalLinus Walleij2-43/+35
This refactors the changes to the GPIO line naming mechanism to not have so widespread effects, instead we conclude the patch series by having created a name attribute in the GPIO descriptor, that need not be globally unique, and it will be initialized from the old .names array in struct gpio_chip if it exists, then used in the legacy sysfs code like the array was used previously. The associated changes to name lines from the device tree are controversial and need to stand alone from this. Resulting changes: 1. Remove the export and the header for the gpio_name_to_desc() as so far the only use is inside gpiolib.c. Staticize gpio_name_to_desc() and move it above the only function using it. 2. Only print a warning if there are two GPIO lines with the same name. The reason is to preserve current behaviour: before the previous changes to the naming mechanism this would not reject probing the driver, instead the error would occur when trying to export the line in sysfs, so restore this behaviour, but print a friendly warning if names collide. Cc: Johan Hovold <johan@kernel.org> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24gpiolib: Add gpio name information to /sys/kernel/debug/gpioMarkus Pargmann1-3/+8
Add some information about gpio names to the debugfs gpio file. name and label of a GPIO are then displayed next to each other. This way it is easy to see what the real name of GPIO is and what the driver requested it for. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> [Dropped unsolicited sysfs ABI patch hunk] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24gpio-sysfs: Use gpio descriptor name instead of gpiochip names arrayMarkus Pargmann1-7/+1
The name is now stored in the gpio descriptor as well, for example to allow to store names from DT. This patch changes the sysfs gpio files to use the gpio descriptor name. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24gpiolib: Use GPIO name from names array for gpio descriptorMarkus Pargmann1-0/+37
This patch adds GPIO names to the GPIO descriptors when initializing the gpiochip. It also introduces a check whether any of the new names will conflict with an existing GPIO name. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24gpio: Introduce gpio descriptor 'name'Markus Pargmann3-0/+42
The latest gpio hogging mechanism assigns each gpio a 'line-name' in the devicetree. The 'name' field is different from the 'label' field. 'label' is only used for requested GPIOs to describe its current use by driver or userspace. The 'name' field describes the GPIO itself, not the use. This is most likely identical to the label in the schematic on the GPIO line and should help to find this particular GPIO. This is equivalent to the gpiochip->names array. However names should be stored in the GPIO descriptor. We will use gpiochip->names in the future only as initializer for the GPIO descriptors for drivers that assign GPIO names hardcoded. All other GPIO names will be parsed from DT and directly assigned to the GPIO descriptor. This patch adds a helper function to find gpio descriptors by name instead of gpio number. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-24gpiolib-of: Rename gpio_hog functions to be genericMarkus Pargmann1-10/+10
The gpio hogging functions are currently only used for gpio-hogging. But these functions are widely generic ones which parse gpio device nodes in the DT. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-20Linux 4.3-rc2Linus Torvalds1-1/+1
2015-09-19fs-writeback: unplug before cond_resched in writeback_sb_inodesChris Mason1-1/+16
Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and writeback_inodes_wb()") has us holding a plug during writeback_sb_inodes, which increases the merge rate when relatively contiguous small files are written by the filesystem. It helps both on flash and spindles. For an fs_mark workload creating 4K files in parallel across 8 drives, this commit improves performance ~9% more by unplugging before calling cond_resched(). cond_resched() doesn't trigger an implicit unplug, so explicitly getting the IO down to the device before scheduling reduces latencies for anyone waiting on clean pages. It also cuts down on how often we use kblockd to unplug, which means less work bouncing from one workqueue to another. Many more details about how we got here: https://lkml.org/lkml/2015/9/11/570 Signed-off-by: Chris Mason <clm@fb.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-19mm: fix type cast in __pfn_to_phys()Tyler Baker1-1/+1
The various definitions of __pfn_to_phys() have been consolidated to use a generic macro in include/asm-generic/memory_model.h. This hit mainline in the form of 012dcef3f058 "mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h". When the generic macro was implemented the type cast to phys_addr_t was dropped which caused boot regressions on ARM platforms with more than 4GB of memory and LPAE enabled. It was suggested to use PFN_PHYS() defined in include/linux/pfn.h as provides the correct logic and avoids further duplication. Reported-by: kernelci.org bot <bot@kernelci.org> Suggested-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-09-18IB/hfi: Properly set permissions for user device filesIra Weiny4-12/+59
Some of the device files are required to be user accessible for PSM while most should remain accessible only by root. Add a parameter to hfi1_cdev_init which controls if the user should have access to this device which places it in a different class with the appropriate devnode callback. In addition set the devnode call back for the existing class to be a bit more explicit for those permissions. Finally remove the unnecessary null check before class_destroy Tested-by: Donald Dutile <ddutile@redhat.com> Signed-off-by: Haralanov, Mitko (mitko.haralanov@intel.com) Signed-off-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18IB/hfi1: mask vs shift confusionDan Carpenter1-2/+2
We are shifting by the _MASK macros instead of the _SHIFT ones. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18IB/hfi1: clean up some definesDan Carpenter1-18/+18
I added spaces around operators so it matches kernel style because normally "-1ULL" is a number and " - 1" is a subtract operation. Also removed some superflous "ULL" types so "1ULL" becomes "1". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18IB/hfi1: info leak in get_ctxt_info()Dan Carpenter1-0/+1
The cinfo struct has a hole after the last struct member so we need to zero it out. Otherwise we disclose some uninitialized stack data. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18IB/hfi1: fix a locking bugDan Carpenter1-2/+2
mutex_trylock() returns zero on failure, not EBUSY. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18IB/hfi1: checking for NULL instead of IS_ERRDan Carpenter1-3/+5
__get_txreq() returns an ERR_PTR() but this checks for NULL so it would oops on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18IB/hfi1: fix sdma_descq_cnt parameter parsingMike Marciniszyn1-1/+1
The boolean tests should have been or-ed. Reported-by: David Binderman <dcb314@hotmail.com> Reviewed-by: Jubin John <jubin.john@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18IB/hfi1: fix copy_to/from_user() error handlingDan Carpenter1-16/+15
copy_to/from_user() returns the number of bytes which we were not able to copy. It doesn't return an error code. Also a couple places had a printk() on error and I removed that because people can take advantage of it to fill /var/log/messages with spam. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18IB/hfi1: fix pstateinfo from returning improperly byteswapped valueIra Weiny2-4/+4
Byteswap link_width_downgrade_*_active values before sending on the wire. In addition properly define the Port State Info structure. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Christian Gomez <christian.gomez@intel.com> Signed-off-by: Rimmer, Todd <todd.rimmer@intel.com> Signed-off-by: Ira Weiny <ira.weiny@intel.com> Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-09-18sched: access local runqueue directly in single_task_runningDominik Dingel1-4/+11
Commit 2ee507c47293 ("sched: Add function single_task_running to let a task check if it is the only task running on a cpu") referenced the current runqueue with the smp_processor_id. When CONFIG_DEBUG_PREEMPT is enabled, that is only allowed if preemption is disabled or the currrent task is bound to the local cpu (e.g. kernel worker). With commit f78195129963 ("kvm: add halt_poll_ns module parameter") KVM calls single_task_running. If CONFIG_DEBUG_PREEMPT is enabled that generates a lot of kernel messages. To avoid adding preemption in that cases, as it would limit the usefulness, we change single_task_running to access directly the cpu local runqueue. Cc: Tim Chen <tim.c.chen@linux.intel.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> Fixes: 2ee507c472939db4b146d545352b8a7c79ef47f8 Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-17revert "mm: make sure all file VMAs have ->vm_ops set"Andrew Morton1-8/+0
Revert commit 6dc296e7df4c "mm: make sure all file VMAs have ->vm_ops set". Will Deacon reports that it "causes some mmap regressions in LTP, which appears to use a MAP_PRIVATE mmap of /dev/zero as a way to get anonymous pages in some of its tests (specifically mmap10 [1])". William Shuman reports Oracle crashes. So revert the patch while we work out what to do. Reported-by: William Shuman <wshuman3@gmail.com> Reported-by: Will Deacon <will.deacon@arm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-17MAINTAINERS: update LTP mailing listCyril Hrubis1-2/+2
[akpm@linux-foundation.org: Wanlong Gao has moved] Signed-off-by: Cyril Hrubis <chrubis@suse.cz> Cc: Jan Stancek <jstancek@redhat.com> Cc: Stanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com> Cc: Alexey Kodanev <alexey.kodanev@oracle.com> Cc: Wanlong Gao <wanlong.gao@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-17userfaultfd: add missing mmput() in error pathEric Biggers1-1/+3
This fixes a memleak if anon_inode_getfile() fails in userfaultfd(). Signed-off-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-17lib/string_helpers.c: fix infinite loop in string_get_size()Vitaly Kuznetsov1-1/+5
Some string_get_size() calls (e.g.: string_get_size(1, 512, STRING_UNITS_10, ..., ...) string_get_size(15, 64, STRING_UNITS_10, ..., ...) ) result in an infinite loop. The problem is that if size is equal to divisor[units]/blk_size and is smaller than divisor[units] we'll end up with size == 0 when we start doing sf_cap calculations: For string_get_size(1, 512, STRING_UNITS_10, ..., ...) case: ... remainder = do_div(size, divisor[units]); -> size is 0, remainder is 1 remainder *= blk_size; -> remainder is 512 ... size *= blk_size; -> size is still 0 size += remainder / divisor[units]; -> size is still 0 The caller causing the issue is sd_read_capacity(), the problem was noticed on Hyper-V, such weird size was reported by host when scanning collides with device removal. This is probably a separate issue worth fixing, this patch is intended to prevent the library routine from infinite looping. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: James Bottomley <JBottomley@Odin.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.