aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-01-14mac80211: fix PS-Poll handlingEmmanuel Grumbach1-1/+1
My commit below broken PS-Poll handling. In case the driver has no frames buffered, driver_release_tids will be 0, but calling find_highest_prio_tid() with 0 as a parameter is not a good idea: fls(0) - 1 = -1. This bug caused mac80211 to think that frames were buffered in the driver which in turn was confused because mac80211 was asking to release frames that were not reported to exist. On iwlwifi, this led to the WARNING below: WARNING: CPU: 0 PID: 11230 at drivers/net/wireless/intel/iwlwifi/mvm/sta.c:1733 iwl_mvm_sta_modify_sleep_tx_count+0x2af/0x320 [iwlmvm]() ffffffffc0627c60 ffff8800069b7648 ffffffff81888913 0000000000000000 0000000000000000 ffff8800069b7688 ffffffff81089d6a ffff8800069b7678 0000000000000001 ffff88003b35abf0 ffff88000698b128 ffff8800069b76d4 Call Trace: [<ffffffff81888913>] dump_stack+0x4c/0x65 [<ffffffff81089d6a>] warn_slowpath_common+0x8a/0xc0 [<ffffffff81089e5a>] warn_slowpath_null+0x1a/0x20 [<ffffffffc05f36bf>] iwl_mvm_sta_modify_sleep_tx_count+0x2af/0x320 [iwlmvm] [<ffffffffc05dae41>] iwl_mvm_mac_release_buffered_frames+0x31/0x40 [iwlmvm] [<ffffffffc045d8b6>] ieee80211_sta_ps_deliver_response+0x6e6/0xd80 [mac80211] [<ffffffffc0461296>] ieee80211_sta_ps_deliver_poll_response+0x26/0x30 [mac80211] [<ffffffffc048f743>] ieee80211_rx_handlers+0xa83/0x2900 [mac80211] [<ffffffffc04917ad>] ieee80211_prepare_and_rx_handle+0x1ed/0xa70 [mac80211] [<ffffffffc045e3d5>] ? sta_info_get_bss+0x5/0x4a0 [mac80211] [<ffffffffc04925b6>] ieee80211_rx_napi+0x586/0xcd0 [mac80211] [<ffffffffc05eaa3e>] iwl_mvm_rx_rx_mpdu+0x59e/0xc60 [iwlmvm] Fixes: 0ead2510f8ce ("mac80211: allow the driver to send EOSP when needed") Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14Revert "mac80211_hwsim: support any address in userspace"Bob Copeland1-2/+3
This reverts commit cd37a90b2a417e5882414e19954eeed174aa4d29. Different userspace programs interpreted HWSIM_ATTR_ADDR_TRANSMITTER and HWSIM_ATTR_ADDR_RECEIVER differently: some expected it to be an unchanging hardware address that is tied to the radio despite which address is configured on the interface, while others expected to be a copy of the address in the frame (the configured address). The intent of the original authors is unclear. The latter interpretation doesn't really work properly with multiple vifs and broadcast frames. Also, as the TA is already in the frame, userspace programs can actually support configured addresses in the former interpretation by mapping between them and the supplied HWSIM_ATTR_ADDR_TRANSMITTER. So, in the interest of API stability, revert to the previous mode of operation and going forward use the former interpretation. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: clear local->sched_scan_req properly on reconfigEliad Peller1-1/+4
On reconfig, in case of sched_scan_req->n_scan_plans > 1, local->sched_scan_req was never cleared, although cfg80211_sched_scan_stopped_rtnl() was called, resulting in local->sched_scan_req holding a stale and preventing further scheduled scan requests. Clear it explicitly in this case. Fixes: 42a7e82c6792 ("mac80211: Do not restart scheduled scan if multiple scan plans are set") Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: avoid ROC during hw restartEliad Peller3-2/+18
Defer ROC requests during hw restart, as the driver might not be fully configured in this stage (e.g. channel contexts were not added yet) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14regulatory: fix world regulatory domain dataJohannes Berg1-5/+7
The rule definitions here aren't really valid, they would be rejected if it came from userspace due to the bandwidth specified being bigger than the rule's width. This is fairly much inconsequential since the other rules around them do enable the bandwidth, but express that better using the NL80211_RRF_AUTO_BW flag. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14wireless: change cfg80211 regulatory domain info as debug messagesDave Young1-15/+18
cfg80211 module prints a lot of messages like below. Actually printing once is acceptable but sometimes it will print again and again, it looks very annoying. It is better to change these detail messages to debugging only. cfg80211: World regulatory domain updated: cfg80211: DFS Master region: unset cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) The changes in this patch is to replace pr_info with pr_debug in function print_rd_rules and print_regdomain_info Signed-off-by: Dave Young <dyoung@redhat.com> [change some pr_err() statements to at least keep the alpha2] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: fix remain-on-channel cancellationJohannes Berg1-2/+4
Ilan's previous commit 1b894521e60c ("mac80211: handle HW ROC expired properly") neglected to take into account that hw_begun was now always set in the software implementation as well as the offloaded case. Fix hw_begun to only apply to the offloaded case to make the check in Ilan's commit safe and correct. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-14mac80211: recalculate SW ROC only when neededJohannes Berg1-5/+1
The current (new) code recalculates the new work timeout for software remain-on-channel whenever any item started. In two of the callers of ieee80211_handle_roc_started(), this is completely pointless since they're for hardware and will skip the recalculation entirely; it's necessary only in the case of having just added a new item to the list, as in the last remaining case the recalculation had just been done. This last case, however, is also problematic - if one of the items on the list actually expires during the recalc the list iteration outside becomes corrupted and crashes. Fix this by moving the recalculation to the only place where it's required. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-01-13hip04_eth: fix missing error handle for build_skb failedwangweidong1-1/+4
when build_skb failed, we should goto refill the buffer. Signed-off-by: Weidong Wang <wangweidong1@huawei.com> Acked-by: Ding Tainhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-133c59x: fix another page map/single unmap imbalanceNeil Horman1-1/+6
libdma debug found another page map/unmap imbalance in 3c59x. Multi fragment frames are mapped such that the lead fragment was mapped as a single entry, while all other fragments were mapped as pages. However, on unmapping they were all unmapped as pages. Fix is pretty easy, just unmap the lead frag as a single entry, and bump the for loop initalization up by one so that all subsequent frags get unmapped as pages Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-133c59x: balance page maps and unmapsNeil Horman1-1/+1
debug kernel noticed a screw up in 3c59x. skbs being mapped as page were being unmapped as singles. Easy fix. Tested by myself Signed-off-by: Neil Horman <nhorman@tuxdriver.com CC: "David S. Miller" <davem@davemloft.net> CC: Steffen Klassert <klassert@mathematik.tu-chemnitz.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-13x25_asy: Free x25_asy on x25_asy_open() failure.David S. Miller1-1/+3
Based upon a report by Dmitry Vyukov. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-13mlxsw: fix SWITCHDEV_OBJ_ID_PORT_MDBDan Carpenter1-0/+1
There is a missing break statement so we always return -EOPNOTSUPP. Fixes: 3a49b4fde2a1 ('mlxsw: Adding layer 2 multicast support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-13genetlink: Fix off-by-one in genl_allocate_reserve_groups()David S. Miller1-1/+1
The bug fix for adding n_groups to the computation forgot to adjust ">=" to ">" to keep the condition correct. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-13batman-adv: Fix list removal of batadv_hardif_neigh_nodeSven Eckelmann1-6/+12
The neigh_list with batadv_hardif_neigh_node objects is accessed with only rcu_read_lock in batadv_hardif_neigh_get and batadv_iv_neigh_print. Thus it is not allowed to kfree the object before the rcu grace period ends (which may still protects context accessing this object). Therefore the object has first to be removed from the neigh_list and then it has either wait with synchronize_rcu or call_rcu till the grace period ends before it can be freed. Fixes: cef63419f7db ("batman-adv: add list of unique single hop neighbors per hard-interface") Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-13batman-adv: fix lockdep splat when doing mcast_freeSimon Wunderlich1-0/+2
While testing, we got something like this: WARNING: CPU: 0 PID: 238 at net/batman-adv/multicast.c:142 batadv_mcast_mla_tt_retract+0x94/0x205 [batman_adv]() [...] Call Trace: [<ffffffff815fc597>] dump_stack+0x4b/0x64 [<ffffffff810b34dc>] warn_slowpath_common+0xbc/0x120 [<ffffffffa0024ec5>] ? batadv_mcast_mla_tt_retract+0x94/0x205 [batman_adv] [<ffffffff810b3705>] warn_slowpath_null+0x15/0x20 [<ffffffffa0024ec5>] batadv_mcast_mla_tt_retract+0x94/0x205 [batman_adv] [<ffffffffa00273fe>] batadv_mcast_free+0x36/0x39 [batman_adv] [<ffffffffa0020c77>] batadv_mesh_free+0x7d/0x13f [batman_adv] [<ffffffffa0036a6b>] batadv_softif_free+0x15/0x25 [batman_adv] [...] Signed-off-by: Simon Wunderlich <simon@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-01-13bgmac: fix a missing check for build_skbwangweidong1-0/+5
when build_skb failed, it may occure a NULL pointer. So add a 'NULL check' for it. Signed-off-by: Weidong Wang <wangweidong1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12net: bnxt: always return values from _bnxt_get_max_ringsArnd Bergmann1-7/+9
Newly added code in the bnxt driver uses a couple of variables that are never initialized when CONFIG_BNXT_SRIOV is not set, and gcc correctly warns about that: In file included from include/linux/list.h:8:0, from include/linux/module.h:9, from drivers/net/ethernet/broadcom/bnxt/bnxt.c:10: drivers/net/ethernet/broadcom/bnxt/bnxt.c: In function 'bnxt_get_max_rings': include/linux/kernel.h:794:26: warning: 'cp' may be used uninitialized in this function [-Wmaybe-uninitialized] include/linux/kernel.h:794:26: warning: 'tx' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/broadcom/bnxt/bnxt.c:5730:11: warning: 'rx' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/broadcom/bnxt/bnxt.c:5736:6: note: 'rx' was declared here This changes the condition so that we fall back to using the PF data if VF is not available, and always initialize the variables to something useful. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 6e6c5a57fbe1 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.") Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12net: bpf: reject invalid shiftsRabin Vincent2-0/+15
On ARM64, a BUG() is triggered in the eBPF JIT if a filter with a constant shift that can't be encoded in the immediate field of the UBFM/SBFM instructions is passed to the JIT. Since these shifts amounts, which are negative or >= regsize, are invalid, reject them in the eBPF verifier and the classic BPF filter checker, for all architectures. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12net: netlink: Fix multicast group storage allocation for families with more than one groupsMatti Vaittinen1-1/+1
Multicast groups are stored in global buffer. Check for needed buffer size incorrectly compares buffer size to first id for family. This means that for families with more than one mcast id one may allocate too small buffer and end up writing rest of the groups to some unallocated memory. Fix the buffer size check to compare allocated space to last mcast id for the family. Tested on ARM using kernel 3.14 Signed-off-by: Matti Vaittinen <matti.vaittinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12net: bpf: reject invalid shiftsRabin Vincent2-0/+15
On ARM64, a BUG() is triggered in the eBPF JIT if a filter with a constant shift that can't be encoded in the immediate field of the UBFM/SBFM instructions is passed to the JIT. Since these shifts amounts, which are negative or >= regsize, are invalid, reject them in the eBPF verifier and the classic BPF filter checker, for all architectures. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12phonet: properly unshare skbs in phonet_rcv()Eric Dumazet1-0/+4
Ivaylo Dimitrov reported a regression caused by commit 7866a621043f ("dev: add per net_device packet type chains"). skb->dev becomes NULL and we crash in __netif_receive_skb_core(). Before above commit, different kind of bugs or corruptions could happen without major crash. But the root cause is that phonet_rcv() can queue skb without checking if skb is shared or not. Many thanks to Ivaylo Dimitrov for his help, diagnosis and tests. Reported-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Tested-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Remi Denis-Courmont <courmisch@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12dwc_eth_qos: Fix dma address for multi-fragment skbsLars Persson1-1/+1
The offset inside the fragment was not used for the dma address and silent data corruption resulted because TSO makes the checksum match. Fixes: 077742dac2c7 ("dwc_eth_qos: Add support for Synopsys DWC Ethernet QoS") Signed-off-by: Lars Persson <larper@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12phy: remove an unneeded conditionDan Carpenter1-1/+1
It used to be that bus->irq was a pointer but after e7f4dc3536a4 ('mdio: Move allocation of interrupts into core') it's an array inside the mdio struct, so it can never be NULL. Let's remove the check. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12mdio: remove an unneed conditionDan Carpenter1-4/+2
It used to be that mdio->irq was a pointer but after e7f4dc3536a4 ('mdio: Move allocation of interrupts into core') it's an array inside the mdio struct so it can never be NULL. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12mdio_bus: NULL dereference on allocation errorDan Carpenter1-5/+6
If bus = kzalloc() fails then we end up dereferencing bus when we do "bus->irq[i] = PHY_POLL;". The code is a little simpler if we reverse the NULL check and return directly on failure. Fixes: e7f4dc3536a4 ('mdio: Move allocation of interrupts into core') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-12kvm: x86: Fix vmwrite to SECONDARY_VM_EXEC_CONTROLHuaitong Han1-1/+2
vmx_cpuid_tries to update SECONDARY_VM_EXEC_CONTROL in the VMCS, but it will cause a vmwrite error on older CPUs because the code does not check for the presence of CPU_BASED_ACTIVATE_SECONDARY_CONTROLS. This will get rid of the following trace on e.g. Core2 6600: vmwrite error: reg 401e value 10 (err 12) Call Trace: [<ffffffff8116e2b9>] dump_stack+0x40/0x57 [<ffffffffa020b88d>] vmx_cpuid_update+0x5d/0x150 [kvm_intel] [<ffffffffa01d8fdc>] kvm_vcpu_ioctl_set_cpuid2+0x4c/0x70 [kvm] [<ffffffffa01b8363>] kvm_arch_vcpu_ioctl+0x903/0xfa0 [kvm] Fixes: feda805fe7c4ed9cf78158e73b1218752e3b4314 Cc: stable@vger.kernel.org Reported-by: Zdenek Kaspar <zkaspar82@gmail.com> Signed-off-by: Huaitong Han <huaitong.han@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-01-11net: Fix typo in netdev_intersect_featuresTom Herbert1-2/+2
Obviously need to 'or in NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. Fixes: c8cd0989bd151f ("net: Eliminate NETIF_F_GEN_CSUM and NETIF_F_V[46]_CSUM") Reported-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net: freescale: mac-fec: Fix build error from phy_device API changeAndrew Lunn1-1/+1
dev has moved inside the new mdio structure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net: freescale: ucc_geth: Fix build error from phy_device API changeAndrew Lunn1-1/+1
dev has moved inside the new mdio structure. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11cgroup: rename cgroup documentationsTejun Heo14-0/+0
cgroup-legacy may be too loaded. Rename the docs so that they're postfixed with v1 and v2. * s/cgroup-legacy/cgroup-v1/ * s/cgroup.txt/cgroup-v2.txt/ Signed-off-by: Tejun Heo <tj@kernel.org>
2016-01-11bonding: Prevent IPv6 link local address on enslaved devicesKarl Heiss1-1/+4
Commit 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") undoes the fix provided by commit c2edacf80e15 ("bonding / ipv6: no addrconf for slaves separately from master") by effectively setting the slave flag after the slave has been opened. If the slave comes up quickly enough, it will go through the IPv6 addrconf before the slave flag has been set and will get a link local IPv6 address. In order to ensure that addrconf knows to ignore the slave devices on state change, set IFF_SLAVE before dev_open() during bonding enslavement. Fixes: 1f718f0f4f97 ("bonding: populate neighbour's private on enslave") Signed-off-by: Karl Heiss <kheiss@gmail.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11IB/mlx5: Add flow steering supportMaor Gottlieb3-1/+517
Adding flow steering support by creating a flow-table per priority (if rules exist in the priority). mlx5_ib uses autogrouping and thus only creates the required destinations. Also includes adding of these flow steering utilities 1. Parsing verbs flow attributes hardware steering specs. 2. Check if flow is multicast - this is required in order to decide to which flow table will we add the steering rule. 3. Set outer headers in flow match criteria to zeros. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Export flow steering APIMaor Gottlieb1-0/+5
Add exports to flow steering API for mlx5_ib usage. The following functions are exported: 1. mlx5_create_auto_grouped_flow_table - used to create flow table with auto flow grouping management (create and destroy flow groups). In auto-grouped flow tables, we create groups automatically if needed (if we don't find an existing flow group with same match criteria when we add new rule). 2. mlx5_destroy_flow_table - used to destroy a flow table. 3. mlx5_add_flow_rule - used to add flow rule into a flow table. 4. mlx5_del_flow_rule - used to delete flow rule from its flow table. 5. mlx5_get_flow_namespace - used to get a handle to the required namespace sub-tree. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Make ipv4/ipv6 location more clearMaor Gottlieb1-2/+18
Change the mlx5 firmware interface header to make it more clear which bytes should be used by IPv4 or IPv6 addresses. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Enable flow steering support for the IB driverMaor Gottlieb3-8/+51
When the driver is loaded, we create flow steering namespace for kernel bypass with nine priorities and another namespace for leftovers(in order to catch packets that weren't matched). Verbs applications will use these priorities. we found nine as a number that balances the requirements from the user and retains performance. The bypass namespace is used by verbs applications that want to bypass the kernel networking stack. The leftovers namespace is used by verbs applications and the sniffer in order to catch packets that weren't handled by any preceding rules. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Initialize namespaces only when supported by deviceMaor Gottlieb1-21/+49
Before we create the sub tree of a steering namespaces(kernel, bypass, leftovers) we check that the device has the required capabilities in order to create this subtree. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Set priority attributesMaor Gottlieb2-19/+55
Each priority has two attributes: 1. max_ft - maximum allowed flow tables under this priority. 2. start_level - start level range of the flow tables in the priority. These attributes are set by traversing the tree nodes by DFS and set start level and max flow tables to each priority. Start level depends on the max flow tables of the prior priorities in the tree. The leaves of the trees have max_ft set in them. Each node accumulates the max_ft of its children and set it accordingly. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Connect flow tablesMaor Gottlieb3-10/+104
Flow tables from different priorities should be chained together. When a packet arrives we search for a match in the by-pass flow tables (first we search for a match in priority 0 and if we don't find a match we move to the next priority). If we can't find a match in any of the bypass flow-tables, we continue searching in the flow-tables of the next priority, which are the kernel's flow tables. Setting the miss flow table in a new flow table to be the next one in the list is performed via create flow table API. If we want to change an existing flow table, for example in order to point from an existing flow table to the new next-in-list flow table, we use the modify flow table API. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Introduce modify flow table commandMaor Gottlieb3-4/+83
Introduce the modify flow table command. This command is used when we want to change the next flow table of an existing flow table. The next flow table is defined as the table we search (in order to find a match), if we couldn't find a match in any of the flow table entries in the current flow table. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Managing root flow tableMaor Gottlieb5-10/+144
The root Flow Table for each Flow Table Type is defined, by default, as the Flow Table with level 0. In order not to use an empty flow tables and introduce new hops, but still preserve space for flow-tables that have a priority greater(lower number) than the current flow table, we introduce this new set root flow table command. This command tells the HW to start matching packets from the assigned root flow table. This command is used when we create new flow table with level lower than the current lowest flow table or it is the first flow table. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Add utilities to find next and prev flow-tablesMaor Gottlieb1-0/+67
Add two utility functions for find next and prev flow table. Find next flow table function gets priority and return the first flow table of the next priority in the tree. Find prev flow table return the last flow table of the previous priority in the tree. These utility functions are used for chaining flow table from different priorities. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net/mlx5_core: Introduce flow steering autogrouped flow tableMaor Gottlieb3-19/+158
When user add rule to autogrouped flow table, we search for flow group with the same match criteria, if we don't find such group then we create new flow group with the required match criteria and insert the rule to this group. We divide the flow table into required_groups + 1, in order to reserve a part of the flow table for rules which don't match any existing group. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11udp: disallow UFO for sockets with SO_NO_CHECK optionMichal Kubeček2-2/+2
Commit acf8dd0a9d0b ("udp: only allow UFO for packets from SOCK_DGRAM sockets") disallows UFO for packets sent from raw sockets. We need to do the same also for SOCK_DGRAM sockets with SO_NO_CHECK options, even if for a bit different reason: while such socket would override the CHECKSUM_PARTIAL set by ip_ufo_append_data(), gso_size is still set and bad offloading flags warning is triggered in __skb_gso_segment(). In the IPv6 case, SO_NO_CHECK option is ignored but we need to disallow UFO for packets sent by sockets with UDP_NO_CHECK6_TX option. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Tested-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11net: pktgen: fix null ptr deref in skb allocationJohn Fastabend1-1/+3
Fix possible null pointer dereference that may occur when calling skb_reserve() on a null skb. Fixes: 879c7220e82 ("net: pktgen: Observe needed_headroom of the device") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11bpf: support ipv6 for bpf_skb_{set,get}_tunnel_keyDaniel Borkmann2-8/+71
After IPv6 support has recently been added to metadata dst and related encaps, add support for populating/reading it from an eBPF program. Commit d3aa45ce6b ("bpf: add helpers to access tunnel metadata") started with initial IPv4-only support back then (due to IPv6 metadata support not being available yet). To stay compatible with older programs, we need to test for the passed structure size. Also TOS and TTL support from the ip_tunnel_info key has been added. Tested with vxlan devs in collect meta data mode with IPv4, IPv6 and in compat mode over different network namespaces. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11bpf: export helper function flags and reject invalid onesDaniel Borkmann2-14/+39
Export flags used by eBPF helper functions through UAPI, so they can be used by programs (instead of them redefining all flags each time or just using the hard-coded values). It also gives a better overview what flags are used where and we can further get rid of the extra macros defined in filter.c. Moreover, reject invalid flags. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11sh_eth: stop reading ECMR in sh_eth_dev_init()Sergei Shtylyov1-5/+2
The code in sh_eth_dev_init() twiddling the ECMR bits always looked a bit strange to me: if one intends to respect 'mdp->duplex', why save old value of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't really need to read ECMR before writing to it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11ravb: stop reading ECMR in ravb_emac_init()Sergei Shtylyov1-5/+2
The code in ravb_emac_init() twiddling the ECMR bits always looked a bit strange to me: if one intends to respect 'priv->duplex', why save old value of the ECMR.DM bit? As all the other bits are zeroed anyway, we don't really need to read ECMR before writing to it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-11sched,cls_flower: set key address type when presentJamal Hadi Salim1-2/+8
only when user space passes the addresses should we consider their presence Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.