aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-11-17ARM: shmobile: r8a7794: Add DU0 clockLaurent Pinchart2-3/+5
The DU0 clock is an MSTP clock, child of the CPG ZX clock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-13ARM: shmobile: gose: Add QSPI device to DTSimon Horman1-0/+43
Enable the QSPI controller in the gose device tree. Based on similar work for the silk board by Vladimir Barinov and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-11-13ARM: shmobile: r8a7793: Add QSPI device to DTSimon Horman1-0/+26
Instantiate the QSPI controller in the r8a7793 device tree. Based on similar work for the r8a7794 by Hisashi Nakamura and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-13ARM: shmobile: r8a7793: Add DMAC devices to DTSimon Horman1-0/+72
Instantiate the two system DMA controllers in the r8a7793 device tree. Based on similar work for the r8a7793 by Laurent Pinchart. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-11-11ARM: shmobile: koelsch: Move SPI FLASH partitions to subnodeGeert Uytterhoeven1-15/+18
As of commits 5cfdedb7b9a0fe38 ("mtd: ofpart: move ofpart partitions to a dedicated dt node") and fe2585e9c29a650a ("doc: dt: mtd: support partitions in a special 'partitions' subnode"), having partitions as direct subnodes of an mtd device is discouraged: spi0.0: 'partitions' subnode not found on /spi@e6b10000/flash@0. Trying to parse direct subnodes as partitions. Hence move the SPI FLASH partitions to a "partitions" subnode. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-10ARM: shmobile: gose: Configure PFC in DTSimon Horman1-0/+31
Configure PFC for the already enabled scif and ethernet devices in the device tree for the gose board. Based on similar work for the koelsch board by Laurent Pinchart and Sergei Shtylyov. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2015-11-10ARM: shmobile: r8a7793: Add PFC to DTSimon Horman1-0/+6
Instantiate PFC device in r8a7793 DT. Based on similar work for the r8a7791 by Magnus Damm. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-11-10ARM: shmobile: r8a7793: Add thermal device to DTSimon Horman1-0/+16
Instantiate the thermal sensor in the r8a7793 device tree. Based on very similar work for the r8a7790 by Magnus Damm. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2015-10-29ARM: shmobile: henninger: remove board DTSergei Shtylyov2-321/+0
The Henninger low cost board was never sold and so had no users outside Renesas (and Cogent Embedded). Instead Renesas has made the Porter board which has mostly similar hardware. Now that the Porter board support is on par with Henninger, we can remove the Henninger's device tree file. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-28ARM: shmobile: porter: add CAN0 DT supportSergei Shtylyov1-0/+12
Define the Porter board dependent part of the CAN0 device node. This patch is analogous to the commit 457acc4a6ce8 ("ARM: shmobile: henninger: add CAN0 DT support") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-23ARM: shmobile: r8a7793: Add IPMMU nodesMagnus Damm1-0/+59
Add IPMMU nodes for the r8a7793 SoC. The IPMMU configuration for r8a7793 is identical to r8a7791 and includes SY0, SY1, DS, MP, MX, RT and GP. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-23ARM: shmobile: r8a7794: Disable all IPMMU nodes by defaultMagnus Damm1-0/+2
The r8a7794 IPMMU nodes for MX and DS are currently lacking a line containing 'status = "disabled"', fix this by making sure they are disabled like all other IPMMU nodes. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-23ARM: shmobile: r8a7791: fix "gpio-ranges" propsSergei Shtylyov1-1/+1
On R8A7791, GPIO banks 1 and 7 are missing pins 26 to 31. Correct the "gpio-ranges" properties of the GPIO1 node (GPIO7 is already correct). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-23ARM: shmobile: r8a7790: fix "gpio-ranges" propsSergei Shtylyov1-2/+2
On R8A7790, GPIO banks 1 and 2 are missing pins 30 and 31. Correct the "gpio-ranges" properties of the corresponding device nodes. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-23ARM: dts: shmobile/r8a7xxx: replace gpio-key, wakeup with wakeup-source propertySudeep Holla5-18/+18
Though the keyboard driver for GPIO buttons(gpio-keys) will continue to check for/support the legacy "gpio-key,wakeup" boolean property to enable gpio buttons as wakeup source, "wakeup-source" is the new standard binding. This patch replaces the legacy "gpio-key,wakeup" with the unified "wakeup-source" property in order to avoid any futher copy-paste duplication. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-21ARM: shmobile: silk: add SDHI1 DT supportSergei Shtylyov1-0/+40
Define the SILK board dependent part of the SDHI1 (connected to micro-SD slot) device nodes along with the necessary voltage regulators. Based on the original patch by Vladimir Barinov <vladimir.barinov@cogentembedded.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-19ARM: shmobile: r8a7791 dtsi: Remove bogus imp_clk nodeGeert Uytterhoeven1-8/+0
R-Car M2-W does not have an IMP core or an IMP clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-19ARM: shmobile: r8a7794 dtsi: Remove bogus imp_clk nodeGeert Uytterhoeven1-8/+0
R-Car E2 does not have an IMP core or an IMP clock. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-15ARM: shmobile: porter: add HS-USB DT supportSergei Shtylyov1-0/+8
Enable HS-USB device for the Porter board, defining the GPIO that the driver should check when probing (which is the ID output from MAX3355 OTG chip). Note that there will be pinctrl-related error messages if both internal PCI and HS-USB drivers are enabled but they should be just ignored. This patch is analogous to the commit 6f4f7156e0e6 ("ARM: shmobile: henninger: enable HS-USB") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-13ARM: shmobile: porter: enable internal PCI and USB PHYSergei Shtylyov1-0/+28
Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them and also enable USB PHY device for the Porter board. We have to enable everything in one patch since EHCI/OHCI devices are already linked to the USB PHY device. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-12ARM: shmobile: porter: enable PCIeSergei Shtylyov1-0/+8
Enable the PCIe controller and clock for the Porter board. This patch is analogous to the commit 485f3ce67c11 ("ARM: shmobile: henninger: Enable PCIe Controller & PCIe bus clock") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-12ARM: shmobile: porter: add QSPI DT supportSergei Shtylyov1-0/+38
Define the Porter board dependent part of the QSPI device node. Add device nodes for Spansion S25FL512S SPI flash and the MTD partitions on it. This patch is mostly analogous to the commit f59838d44835 ("ARM: shmobile: henninger: add QSPI DT support") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-09ARM: shmobile: porter: add VIN0/ADV7180 DT supportSergei Shtylyov1-0/+35
Define the Porter board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices. This patch is analogous to the commit 8d62f4f75320 ("ARM: shmobile: henninger: add VIN0/ADV7180 DT support") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-09ARM: shmobile: porter: add I2C2 DT supportSergei Shtylyov1-0/+13
Define the Porter board dependent part of the I2C2 device node. This patch is analogous to the commit 29a647c396a0 ("ARM: shmobile: henninger: add I2C2 DT support") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-08ARM: shmobile: porter: enable SATA0Sergei Shtylyov1-0/+4
Enable SATA0 device for the Porter board. This patch is analogous to the commit 5a62ec57004f ("ARM: shmobile: henninger: enable SATA0") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-07ARM: shmobile: porter: add SDHI0/2 DT supportSergei Shtylyov1-0/+76
Define the Porter board dependent part of the SDHI0/2 device nodes along with the necessary voltage regulators (note that the Vcc regulators are dummy -- they are required but don't actually exist on the board). Also, GPIOs have to be used for the CD and WP signals due to the SDHI driver constraints... This patch is analogous to the commit 1299df03d719 ("ARM: shmobile: henninger: add SDHI0/2 DT support") as there are no differences between those boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-06ARM: shmobile: porter: add Ether DT supportSergei Shtylyov1-1/+27
Define the Porter board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting. This patch is analogous to the commit 26b0d2cf73cb ("ARM: shmobile: henninger: add Ether DT support") as there are no differences between those boards in this respect. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-05ARM: shmobile: fix SILK board nameSergei Shtylyov1-2/+2
Unfortunately, the SILK board bindings were not quite correct, as the board name should be all caps. Fix that, adding the board model # in parens and removing stray semicolon. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-10-05ARM: shmobile: r8a7794: add HS-USB DT supportSergei Shtylyov1-0/+12
Define the R8A7794 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>