aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-09-21dts: sun8i-h3: associate exposed UARTs on Orange Pi BoardsJorik Jonker3-0/+54
These H3 boards all expose UART1-3 on their expansion header. Since other functions can be muxed to these pins, they are explicitly disabled. To enable them, one could use DT overlays or U-boot commands: => fdt set /soc/serial@01c28c00 status okay Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmuxJorik Jonker2-3/+10
This was done to make UART1-3 on H3 consistent, and less complicated to enable UART1-3 on the breakout header on the several H3 board (notably Orange Pi's). This patch adds a bit of complexity for the existing Banana Pi, which already had the RTS/CTS associated on UART1. The RTS/CTS for UART2-3 could be defined in the same way, but since there is no actual use case for them at the moment, they are left out. Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21dts: sun8i-h3: add pinmux definitions for UART2-3Jorik Jonker1-0/+14
These are the pinmux definitions for UART2-3 on H3. These UARTs can only be muxed to these pins, so _a and @0 do not really make sense. I have left out RTS/CTS, since these are rarely used. These can easily be enabled using an additional pinmux set. Signed-off-by: Jorik Jonker <jorik@kippendief.biz> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: a80-optimus: Disable EHCI1Chen-Yu Tsai1-2/+4
EHCI1 provides an HSIC interface. This interface is exposed on the board through two pins among the GPIO header. With the PHY now powered up and responding, enabling the interface when nothing is connected results in a lot of error messages: usb 2-1: device descriptor read/64, error -71 usb 2-1: device descriptor read/64, error -71 usb 2-1: new high-speed USB device number 3 using ehci-platform usb 2-1: device descriptor read/64, error -71 usb 2-1: device descriptor read/64, error -71 usb 2-1: new high-speed USB device number 4 using ehci-platform usb 2-1: device not accepting address 4, error -71 usb 2-1: new high-speed USB device number 5 using ehci-platform usb 2-1: device not accepting address 5, error -71 usb usb2-port1: unable to enumerate USB device Disable it by default, but leave the entries in the board DTS. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulatorsChen-Yu Tsai1-0/+112
The AXP806 PMIC is the secondary PMIC. It provides various supply voltages for the SoC and other peripherals. The PMIC's interrupt line is connected to NMI pin of the SoC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulatorsChen-Yu Tsai1-0/+113
The AXP806 PMIC is the secondary PMIC. It provides various supply voltages for the SoC and other peripherals. The PMIC's interrupt line is connected to NMI pin of the SoC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unusedChen-Yu Tsai1-0/+4
The AXP809's SW (switch) regulator is unused on the Cubieboard 4. Add an empty node for it so that the OS can generate constraints. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unusedChen-Yu Tsai1-0/+4
The AXP809's SW (switch) regulator is unused on the A80 Optimus. Add an empty node for it so that the OS can generate constraints. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10hHans de Goede1-0/+10
The ga10h tablet has a gsl3675 touchscreen, add a dt node describing it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04Hans de Goede1-0/+9
Add a node enabling the gsl3670 touchscreen controller found on sun8i-a23-polaroid-mid2809pxe04 tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03Hans de Goede1-0/+19
Add a node enabling the gsl1680 touchscreen controller found on sun8i-a23-polaroid-mid2407pxe03 tablets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dzHans de Goede1-0/+9
The inet86dz tablet has a gsl1680 touchscreen, add a dt node describing it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-21ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90hHans de Goede1-0/+9
The gt90h tablet has a gsl3675 touchscreen, add a dt node describing it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-11ARM: dts: gr8: Add support for the GR8 evaluation boardMylène Josserand2-0/+343
The GR8-EVB is a small board with an NextThing GR8, an Hynix MLC NAND, an AXP209 PMIC, USB host and OTG, an SPDIF output and a connectors for CSI, I2S and LCD. Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>