aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-22pinctrl: xway: fix typoLinus Walleij1-1/+1
A typo in the previous commit to this file needs fixing. Cc: Amitoj Kaur Chawla <amitoj1606@gmail.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 6b4316aecec0 ("pinctrl: xway: Change structure initialisation to c99 style") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22Revert "pinctrl: amd: make it explicitly non-modular"Paul Gortmaker1-3/+20
This reverts commit b8c2b10a9bc0272a20e096852f8fbbf361749dda. This patch was in my queue at the same time that a conversion of the same driver from bool --> tristate was pending and merged. That is commit 337ea0fb1535 ("pinctrl: Turn AMD support to tristate") Normally the conflict would show up in the build coverage I do, however in this case an avoidable instance of linux/module.h in linux/gpio/driver.h (!) causes the build failure to be masked and instead the tristate gets built-in even for selected "=m". In working on removing module.h from driver.h this issue was then revealed (along with other implicit module.h assumptions in gpio, and mfd -- which will be fixed separately.) Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22pinctrl: iproc: Add NSP and Stingray GPIO supportRay Jui1-7/+111
The iProc GPIO controller is shared among multiple iProc based SoCs. In the NSP integration, the drive strength pinctrl function is disabled. In the integration of Stingray, pinctrl is handled by another block and this GPIO controller is solely used as a GPIO controller, and therefore should not be registered to the pinconf framework This patch introduces new SoC specific compatible strings "brcm,iproc-nsp-gpio" for NSP with drive strength feature disabled and "brcm,iproc-stingray-gpio" for Stingray with all PINCONF features disabled This patch is developed based on the initial work from Yendapally Reddy Dhananjaya <yendapally.reddy@broadcom.com> who attempted to disable drive strength configuration for the iProc based NSP chip. In addition, Pramod Kumar <pramod.kumar@broadcom.com> also contributed to make the support more generic across all currently supported PINCONF functions in the iProc GPIO/PINCONF driver Signed-off-by: Pramod Kumar <pramodku@broadcom.com> Signed-off-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22pinctrl: Update iProc GPIO DT bindingsRay Jui1-2/+16
Update the iProc GPIO binding document to add new compatible strings "brcm,iproc-nsp-gpio" and "brcm,iproc-stingray-gpio" to support the iProc based GPIO controller used in the NSP and Stingray SoCs, respectively Signed-off-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22pinctrl: bcm: add OF dependenciesArnd Bergmann1-0/+2
Building without CONFIG_OF gives us these warnings for the broadcom pinctrl drivers: drivers/pinctrl/bcm/pinctrl-nsp-mux.c:356:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function) drivers/pinctrl/bcm/pinctrl-cygnus-mux.c:739:20: error: 'pinconf_generic_dt_node_to_map_group' undeclared here (not in a function) The function is only available when CONFIG_OF is set, so we should add a Kconfig dependency for both drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22pinctrl: ns2: remove redundant dev_err call in ns2_pinmux_probe()Wei Yongjun1-6/+2
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: Add STM32F746 MCU supportAlexandre TORGUE3-0/+1688
This patch which adds STM32F746 pinctrl and GPIO support, relies on the generic STM32 pinctrl driver. Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: intel: Protect set wake flow by spin lockAndy Shevchenko1-0/+5
It seems intel_gpio_irq_wake() misses lock protection against I/O flow. Use spin lock here as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: nsp: remove redundant dev_err call in nsp_pinmux_probe()Wei Yongjun1-6/+2
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: uniphier: add Ethernet pin-mux settingsMasahiro Yamada7-0/+109
Add the following Ethernet interfaces: PH1-LD4: MII, RMII PH1-Pro4: MII, RMII, RGMII PH1-sLD8: MII, RMII (Built-in PHY is also supported) ProXstream2: MII, RMII, RGMII PH1-LD6b: RMII, RGMII PH1-LD11: RMII (Built-in PHY is also supported) PH1-LD20: RMII, RGMII Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11sh-pfc: Use PTR_ERR_OR_ZERO() to simplify the codeWei Yongjun1-4/+1
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-11pinctrl: ns2: fix return value check in ns2_pinmux_probe()Wei Yongjun1-2/+2
In case of error, the function pinctrl_register() returns NULL not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-08pinctrl: qcom: update DT bindings with ebi2 groupsLinus Walleij1-1/+1
This adds the ebi2 and ebi2cs groups to the MSM8660 pin control documentation document. Cc: devicetree@vger.kernel.org Cc: Andy Gross <andy.gross@linaro.org> Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-08pinctrl: qcom: establish proper EBI2 pin groupsLinus Walleij1-22/+46
After some digging around I found documentation (!) of the APQ8060 EBI2 pin groups. It turns out I first need to split the group in two: ebi2cs and ebi2 proper. The chip select pins are kind of orthogonal to the other EBI2 pins since CS1B and CS2B can be muxed over address bits 7 and 6 (don't know why, but they can). This is good to fix up before we add users. Also found what the "holes" in the assignment all the way up to gpio158 was actually for. All mux documentation comes from "Snapdragon(TM) S3 APQ8060-based DragonBoard(TM) GPIO User Guide Rev. E August 10, 2012", published by Bsquare Corporation. As the documentation seems a bit hard to come by I put some comments in the group definitions so that it is clear to all readers what is going on here and what the lines are used for. Cc: Björn Andersson <bjorn.andersson@linaro.org> Cc: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-06pinctrl: imx21: Remove the MODULE_DEVICE_TABLE() macroFabio Estevam1-1/+0
Commit e2756baa4217 ("pinctrl: imx21: make it explicitly non-modular") missed the removal of the MODULE_DEVICE_TABLE() macro causing the following build error: drivers/pinctrl/freescale/pinctrl-imx21.c:328:1: error: data definition has no type or storage class [-Werror] MODULE_DEVICE_TABLE(of, imx21_pinctrl_of_match); ,so remove the macro to fix this problem. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-05Documentation: dt: Add new compatible to STM32 pinctrl driver bindingsAlexandre TORGUE1-0/+1
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>