aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-06-12ACPICA: Add new flags to HEST subtablesBob Moore1-0/+1
ACPICA commit c2c3807adb8a67e6462b731dc64be35d8b8317f8 Add GHES_ASSIST flag for ACPI 6.2 Add missing GLOBAL flag for AER structures Link: https://github.com/acpica/acpica/commit/c2c3807a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Tables: Add PPTT table definitionsLv Zheng1-0/+80
ACPICA commit c27465d07fd008ba71c1f687b2715267701bc8ad This patch adds PPTT (Processor Properties Topology Table, defined in ACPI spec 6.2) support in ACPICA core, including table definitions expressed in C structures and macros. Lv Zheng. Link: https://github.com/acpica/acpica/commit/c27465d0 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Add new notify value for HEST tableBob Moore1-1/+2
ACPICA commit 35e06462f3186e1e6e9cb4fe97dfb43d4b3718a2 "Software Delegated Exception" - ACPI 6.2 Link: https://github.com/acpica/acpica/commit/35e06462 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Add support for _HMA as a predefined methodErik Schmauss1-0/+3
ACPICA commit 223a647c72243359231865a64c1be04d208dcdbd Link: https://github.com/acpica/acpica/commit/223a647c Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Add support for _LSW as a predefined methodErik Schmauss1-0/+4
ACPICA commit 8e425bdd9fa27264c217a3a449eb3c2da3769542 Link: https://github.com/acpica/acpica/commit/8e425bdd Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Add support for _LSR as a predefined methodErik Schmauss1-0/+5
ACPICA commit 89020347ada3f0ff5499a804178d574359e4730f Link: https://github.com/acpica/acpica/commit/89020347 Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Add support for _LSI as a predefined methodErik Schmauss1-0/+4
ACPICA commit f2f3813fb6b6a6ec1f406f05061c0e9270e86146 Link: https://github.com/acpica/acpica/commit/f2f3813f Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Tables: Fix defined values for MADT PCAT_COMPAT flagJanosch Hildebrand1-2/+2
ACPICA commit c0292548a43bdc5d83d5be2953b663e60b6f12b4 Link: https://github.com/acpica/acpica/issues/224 Link: https://github.com/acpica/acpica/commit/c0292548 Signed-off-by: Janosch Hildebrand <jnosh+git@jnosh.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Update Status field for BGRT tableBob Moore1-0/+5
ACPICA commit dbc6a3d5ff22df730cc81802af0422bb64b19347 Orientation flags added. ACPI 6.2 Link: https://github.com/acpica/acpica/commit/dbc6a3d5 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Utilities: Make a notify value reservedBob Moore1-2/+2
ACPICA commit 54eb9be35414847da7e2903c8d410fa806b44fb5 0x0C (Graceful shutdown) is now reverted to reserved. 0x81 takes the place of this value. Link: https://github.com/acpica/acpica/commit/54eb9be3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Added two new UUID valuesBob Moore1-0/+5
ACPICA commit a0168a7aca421d195e1c2b609279fa4a967dd3ac Processor Properties. ACPI 6.2 Link: https://github.com/acpica/acpica/commit/a0168a7a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Add new notify value for memory attributes updateBob Moore2-2/+5
ACPICA commit d37e878292bc9c7835b74e90d1c4c79e96ce6652 New notify value for memory attributes update for ACPI 6.2. Link: https://github.com/acpica/acpica/commit/d37e8782 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Tables: Add HMAT table definitionsLv Zheng1-0/+117
ACPICA commit 3dae756631c8c2baddfa19f43a379aee42b28312 This patch adds unified HMAT table structure definitions so that ACPICA users can develop HMAT related OS features based on the ACPICA standard structures. Lv Zheng. Link: https://github.com/acpica/acpica/commit/3dae7566 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Tables: Add WSMT supportLv Zheng1-0/+22
ACPICA commit 4f12387029c6a561e7792f53caf2e7f1f0ab2bbe This patch adds WSMT support, the table can be found at Line [#1]. The support includes table structure definitions (ACPICA tables) and assembly/disassembly (iasl) support. Lv Zheng. Link: https://github.com/acpica/acpica/commit/4f123870 Link: https://msdn.microsoft.com/windows/hardware/drivers/bringup/acpi-system-description-tables#wsmt [1] Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12ACPICA: Change path's type from u8* to char*Erik Schmauss2-2/+2
ACPICA commit 51e73c1d35dd21cfe39277b3c71decd3268f669c All instances using a named parseOp's path field has a type cast from u8* to char*. Changing path's type from u8* to char* eliminates type casting and retains the previous behavior. Link: https://github.com/acpica/acpica/commit/51e73c1d Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-11Linux 4.12-rc5Linus Torvalds1-1/+1
2017-06-11compiler, clang: properly override 'inline' for clangLinus Torvalds1-1/+2
Commit abb2ea7dfd82 ("compiler, clang: suppress warning for unused static inline functions") just caused more warnings due to re-defining the 'inline' macro. So undef it before re-defining it, and also add the 'notrace' attribute like the gcc version that this is overriding does. Maybe this makes clang happier. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-11KVM: async_pf: avoid async pf injection when in guest modeWanpeng Li3-4/+7
INFO: task gnome-terminal-:1734 blocked for more than 120 seconds. Not tainted 4.12.0-rc4+ #8 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. gnome-terminal- D 0 1734 1015 0x00000000 Call Trace: __schedule+0x3cd/0xb30 schedule+0x40/0x90 kvm_async_pf_task_wait+0x1cc/0x270 ? __vfs_read+0x37/0x150 ? prepare_to_swait+0x22/0x70 do_async_page_fault+0x77/0xb0 ? do_async_page_fault+0x77/0xb0 async_page_fault+0x28/0x30 This is triggered by running both win7 and win2016 on L1 KVM simultaneously, and then gives stress to memory on L1, I can observed this hang on L1 when at least ~70% swap area is occupied on L0. This is due to async pf was injected to L2 which should be injected to L1, L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host actually), and L1 guest starts accumulating tasks stuck in D state in kvm_async_pf_task_wait() since missing PAGE_READY async_pfs. This patch fixes the hang by doing async pf when executing L1 guest. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-10hexagon: Use raw_copy_to_userGuenter Roeck1-3/+2
Commit ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") replaced __copy_to_user_hexagon() with raw_copy_to_user(), but did not catch all callers, resulting in the following build error. arch/hexagon/mm/uaccess.c: In function '__clear_user_hexagon': arch/hexagon/mm/uaccess.c:40:3: error: implicit declaration of function '__copy_to_user_hexagon' Fixes: ac4691fac8ad ("hexagon: switch to RAW_COPY_USER") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Richard Kuo <rkuo@codeaurora.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-10ufs: we need to sync inode before freeing itAl Viro1-0/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09excessive checks in ufs_write_failed() and ufs_evict_inode()Al Viro1-13/+5
As it is, short copy in write() to append-only file will fail to truncate the excessive allocated blocks. As the matter of fact, all checks in ufs_truncate_blocks() are either redundant or wrong for that caller. As for the only other caller (ufs_evict_inode()), we only need the file type checks there. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs_getfrag_block(): we only grab ->truncate_mutex on block creation pathAl Viro1-1/+3
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs_extend_tail(): fix the braino in calling conventions of ufs_new_fragments()Al Viro1-1/+2
... and it really needs splitting into "new" and "extend" cases, but that's for later Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs: set correct ->s_maxsizeAl Viro1-0/+18
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs: restore maintaining ->i_blocksAl Viro2-1/+26
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09fix ufs_isblockset()Al Viro1-3/+7
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09ufs: restore proper tail allocationAl Viro1-1/+1
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-06-09Btrfs: fix delalloc accounting leak caused by u32 overflowOmar Sandoval1-2/+2
btrfs_calc_trans_metadata_size() does an unsigned 32-bit multiplication, which can overflow if num_items >= 4 GB / (nodesize * BTRFS_MAX_LEVEL * 2). For a nodesize of 16kB, this overflow happens at 16k items. Usually, num_items is a small constant passed to btrfs_start_transaction(), but we also use btrfs_calc_trans_metadata_size() for metadata reservations for extent items in btrfs_delalloc_{reserve,release}_metadata(). In drop_outstanding_extents(), num_items is calculated as inode->reserved_extents - inode->outstanding_extents. The difference between these two counters is usually small, but if many delalloc extents are reserved and then the outstanding extents are merged in btrfs_merge_extent_hook(), the difference can become large enough to overflow in btrfs_calc_trans_metadata_size(). The overflow manifests itself as a leak of a multiple of 4 GB in delalloc_block_rsv and the metadata bytes_may_use counter. This in turn can cause early ENOSPC errors. Additionally, these WARN_ONs in extent-tree.c will be hit when unmounting: WARN_ON(fs_info->delalloc_block_rsv.size > 0); WARN_ON(fs_info->delalloc_block_rsv.reserved > 0); WARN_ON(space_info->bytes_pinned > 0 || space_info->bytes_reserved > 0 || space_info->bytes_may_use > 0); Fix it by casting nodesize to a u64 so that btrfs_calc_trans_metadata_size() does a full 64-bit multiplication. While we're here, do the same in btrfs_calc_trunc_metadata_size(); this can't overflow with any existing uses, but it's better to be safe here than have another hard-to-debug problem later on. Cc: stable@vger.kernel.org Signed-off-by: Omar Sandoval <osandov@fb.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-06-09Btrfs: clear EXTENT_DEFRAG bits in finish_ordered_ioLiu Bo1-1/+1
Before this, we use 'filled' mode here, ie. if all range has been filled with EXTENT_DEFRAG bits, get to clear it, but if the defrag range joins the adjacent delalloc range, then we'll have EXTENT_DEFRAG bits in extent_state until releasing this inode's pages, and that prevents extent_data from being freed. This clears the bit if any was found within the ordered extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-06-09btrfs: tree-log.c: Wrong printk information about namelenSu Yue1-1/+1
In verify_dir_item, it wants to printk name_len of dir_item but printk data_len acutally. Fix it by calling btrfs_dir_name_len instead of btrfs_dir_data_len. Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2017-06-09Input: synaptics-rmi4 - register F03 port as pass-through serioDmitry Torokhov1-1/+1
The 5th generation Thinkpad X1 Carbons use Synaptics touchpads accessible over SMBus/RMI, combined with ALPS or Elantech trackpoint devices instead of classic IBM/Lenovo trackpoints. Unfortunately there is no way for ALPS driver to detect whether it is dealing with touchpad + trackpoint combination or just a trackpoint, so we end up with a "phantom" dualpoint ALPS device in addition to real touchpad and trackpoint. Given that we do not have any special advanced handling for ALPS or Elantech trackpoints (unlike IBM trackpoints that have separate driver and a host of options) we are better off keeping the trackpoints in PS/2 emulation mode. We achieve that by setting serio type to SERIO_PS_PSTHRU, which will limit number of protocols psmouse driver will try. In addition to getting rid of the "phantom" touchpads, this will also speed up probing of F03 pass-through port. Reported-by: Damjan Georgievski <gdamjan@gmail.com> Suggested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-06-09device-dax: fix 'dax' device filesystem inode destruction crashDan Williams1-2/+7
The inode destruction path for the 'dax' device filesystem incorrectly assumes that the inode was initialized through 'alloc_dax()'. However, if someone attempts to directly mount the dax filesystem with 'mount -t dax dax mnt' that will bypass 'alloc_dax()' and the following failure signatures may occur as a result: kill_dax() must be called before final iput() WARNING: CPU: 2 PID: 1188 at drivers/dax/super.c:243 dax_destroy_inode+0x48/0x50 RIP: 0010:dax_destroy_inode+0x48/0x50 Call Trace: destroy_inode+0x3b/0x60 evict+0x139/0x1c0 iput+0x1f9/0x2d0 dentry_unlink_inode+0xc3/0x160 __dentry_kill+0xcf/0x180 ? dput+0x37/0x3b0 dput+0x3a3/0x3b0 do_one_tree+0x36/0x40 shrink_dcache_for_umount+0x2d/0x90 generic_shutdown_super+0x1f/0x120 kill_anon_super+0x12/0x20 deactivate_locked_super+0x43/0x70 deactivate_super+0x4e/0x60 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC RIP: 0010:kfree+0x6d/0x290 Call Trace: <IRQ> dax_i_callback+0x22/0x60 ? dax_destroy_inode+0x50/0x50 rcu_process_callbacks+0x298/0x740 ida_remove called for id=0 which is not allocated. WARNING: CPU: 0 PID: 0 at lib/idr.c:383 ida_remove+0x110/0x120 [..] Call Trace: <IRQ> ida_simple_remove+0x2b/0x50 ? dax_destroy_inode+0x50/0x50 dax_i_callback+0x3c/0x60 rcu_process_callbacks+0x298/0x740 Add missing initialization of the 'struct dax_device' and inode so that the destruction path does not kfree() or ida_simple_remove() uninitialized data. Fixes: 7b6be8444e0f ("dax: refactor dax-fs into a generic provider of 'struct dax_device' instances") Reported-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-09efi: Fix boot panic because of invalid BGRT image addressDave Young1-1/+25
Maniaxx reported a kernel boot crash in the EFI code, which I emulated by using same invalid phys addr in code: BUG: unable to handle kernel paging request at ffffffffff280001 IP: efi_bgrt_init+0xfb/0x153 ... Call Trace: ? bgrt_init+0xbc/0xbc acpi_parse_bgrt+0xe/0x12 acpi_table_parse+0x89/0xb8 acpi_boot_init+0x445/0x4e2 ? acpi_parse_x2apic+0x79/0x79 ? dmi_ignore_irq0_timer_override+0x33/0x33 setup_arch+0xb63/0xc82 ? early_idt_handler_array+0x120/0x120 start_kernel+0xb7/0x443 ? early_idt_handler_array+0x120/0x120 x86_64_start_reservations+0x29/0x2b x86_64_start_kernel+0x154/0x177 secondary_startup_64+0x9f/0x9f There is also a similar bug filed in bugzilla.kernel.org: https://bugzilla.kernel.org/show_bug.cgi?id=195633 The crash is caused by this commit: 7b0a911478c7 efi/x86: Move the EFI BGRT init code to early init code The root cause is the firmware on those machines provides invalid BGRT image addresses. In a kernel before above commit BGRT initializes late and uses ioremap() to map the image address. Ioremap validates the address, if it is not a valid physical address ioremap() just fails and returns. However in current kernel EFI BGRT initializes early and uses early_memremap() which does not validate the image address, and kernel panic happens. According to ACPI spec the BGRT image address should fall into EFI_BOOT_SERVICES_DATA, see the section 5.2.22.4 of below document: http://www.uefi.org/sites/default/files/resources/ACPI_6_1.pdf Fix this issue by validating the image address in efi_bgrt_init(). If the image address does not fall into any EFI_BOOT_SERVICES_DATA areas we just bail out with a warning message. Reported-by: Maniaxx <tripleshiftone@gmail.com> Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Fixes: 7b0a911478c7 ("efi/x86: Move the EFI BGRT init code to early init code") Link: http://lkml.kernel.org/r/20170609084558.26766-2-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-09cxl: Avoid double free_irq() for psl,slice interruptsVaibhav Jain1-3/+11
During an eeh call to cxl_remove can result in double free_irq of psl,slice interrupts. This can happen if perst_reloads_same_image == 1 and call to cxl_configure_adapter() fails during slot_reset callback. In such a case we see a kernel oops with following back-trace: Oops: Kernel access of bad area, sig: 11 [#1] Call Trace: free_irq+0x88/0xd0 (unreliable) cxl_unmap_irq+0x20/0x40 [cxl] cxl_native_release_psl_irq+0x78/0xd8 [cxl] pci_deconfigure_afu+0xac/0x110 [cxl] cxl_remove+0x104/0x210 [cxl] pci_device_remove+0x6c/0x110 device_release_driver_internal+0x204/0x2e0 pci_stop_bus_device+0xa0/0xd0 pci_stop_and_remove_bus_device+0x28/0x40 pci_hp_remove_devices+0xb0/0x150 pci_hp_remove_devices+0x68/0x150 eeh_handle_normal_event+0x140/0x580 eeh_handle_event+0x174/0x360 eeh_event_handler+0x1e8/0x1f0 This patch fixes the issue of double free_irq by checking that variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are not '0' before un-mapping and resetting these variables to '0' when they are un-mapped. Cc: stable@vger.kernel.org Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-09gpio: mvebu: fix gpio bank registration when pwm is usedRichard Genoud1-0/+7
If more than one gpio bank has the "pwm" property, only one will be registered successfully, all the others will fail with: mvebu-gpio: probe of f1018140.gpio failed with error -17 That's because in alloc_pwms(), the chip->base (aka "int pwm"), was not set (thus, ==0) ; and 0 is a meaningful start value in alloc_pwm(). What was intended is mvpwm->chip->base = -1. Like that, the numbering will be done auto-magically Moreover, as the region might be already occupied by another pwm, we shouldn't force: mvpwm->chip->base = 0 nor mvpwm->chip->base = id * MVEBU_MAX_GPIO_PER_BANK; Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09gpio: mvebu: fix blink counter register selectionRichard Genoud1-1/+1
The blink counter A was always selected because 0 was forced in the blink select counter register. The variable 'set' was obviously there to be used as the register value, selecting the B counter when id==1 and A counter when id==0. Tested on clearfog-pro (Marvell 88F6828) Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support") Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-09KEYS: fix refcount_inc() on zeroMark Rutland1-7/+4
If a key's refcount is dropped to zero between key_lookup() peeking at the refcount and subsequently attempting to increment it, refcount_inc() will see a zero refcount. Here, refcount_inc() will WARN_ONCE(), and will *not* increment the refcount, which will remain zero. Once key_lookup() drops key_serial_lock, it is possible for the key to be freed behind our back. This patch uses refcount_inc_not_zero() to perform the peek and increment atomically. Fixes: fff292914d3a2f1e ("security, keys: convert key.usage from atomic_t to refcount_t") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: David Windsor <dwindsor@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Hans Liljestrand <ishkamiel@gmail.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: Convert KEYCTL_DH_COMPUTE to use the crypto KPP APIMat Martineau2-103/+171
The initial Diffie-Hellman computation made direct use of the MPI library because the crypto module did not support DH at the time. Now that KPP is implemented, KEYCTL_DH_COMPUTE should use it to get rid of duplicate code and leverage possible hardware acceleration. This fixes an issue whereby the input to the KDF computation would include additional uninitialized memory when the result of the Diffie-Hellman computation was shorter than the input prime number. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09crypto : asymmetric_keys : verify_pefile:zero memory content before freeingLoganaden Velvindron1-2/+2
Signed-off-by: Loganaden Velvindron <logan@hackers.mu> Signed-off-by: Yasir Auleear <yasirmx@hackers.mu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: add __user annotations to keyctl_kdf_paramsEric Biggers1-2/+2
Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: ensure the KDF counter is properly alignedEric Biggers1-13/+3
Accessing a 'u8[4]' through a '__be32 *' violates alignment rules. Just make the counter a __be32 instead. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: don't feed uninitialized "otherinfo" into KDFEric Biggers1-1/+1
If userspace called KEYCTL_DH_COMPUTE with kdf_params containing NULL otherinfo but nonzero otherinfolen, the kernel would allocate a buffer for the otherinfo, then feed it into the KDF without initializing it. Fix this by always doing the copy from userspace (which will fail with EFAULT in this scenario). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: DH: forbid using digest_null as the KDF hashEric Biggers1-1/+11
Requesting "digest_null" in the keyctl_kdf_params caused an infinite loop in kdf_ctr() because the "null" hash has a digest size of 0. Fix it by rejecting hash algorithms with a digest size of 0. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: sanitize key structs before freeingEric Biggers2-4/+1
While a 'struct key' itself normally does not contain sensitive information, Documentation/security/keys.txt actually encourages this: "Having a payload is not required; and the payload can, in fact, just be a value stored in the struct key itself." In case someone has taken this advice, or will take this advice in the future, zero the key structure before freeing it. We might as well, and as a bonus this could make it a bit more difficult for an adversary to determine which keys have recently been in use. This is safe because the key_jar cache does not use a constructor. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: trusted: sanitize all key materialEric Biggers1-28/+22
As the previous patch did for encrypted-keys, zero sensitive any potentially sensitive data related to the "trusted" key type before it is freed. Notably, we were not zeroing the tpm_buf structures in which the actual key is stored for TPM seal and unseal, nor were we zeroing the trusted_key_payload in certain error paths. Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: encrypted: sanitize all key materialEric Biggers1-18/+13
For keys of type "encrypted", consistently zero sensitive key material before freeing it. This was already being done for the decrypted payloads of encrypted keys, but not for the master key and the keys derived from the master key. Out of an abundance of caution and because it is trivial to do so, also zero buffers containing the key payload in encrypted form, although depending on how the encrypted-keys feature is used such information does not necessarily need to be kept secret. Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: David Safford <safford@us.ibm.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: user_defined: sanitize key payloadsEric Biggers1-4/+12
Zero the payloads of user and logon keys before freeing them. This prevents sensitive key material from being kept around in the slab caches after a key is released. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: sanitize add_key() and keyctl() key payloadsEric Biggers1-3/+9
Before returning from add_key() or one of the keyctl() commands that takes in a key payload, zero the temporary buffer that was allocated to hold the key payload copied from userspace. This may contain sensitive key material that should not be kept around in the slab caches. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: fix freeing uninitialized memory in key_update()Eric Biggers1-3/+2
key_update() freed the key_preparsed_payload even if it was not initialized first. This would cause a crash if userspace called keyctl_update() on a key with type like "asymmetric" that has a ->preparse() method but not an ->update() method. Possibly it could even be triggered for other key types by racing with keyctl_setperm() to make the KEY_NEED_WRITE check fail (the permission was already checked, so normally it wouldn't fail there). Reproducer with key type "asymmetric", given a valid cert.der: keyctl new_session keyid=$(keyctl padd asymmetric desc @s < cert.der) keyctl setperm $keyid 0x3f000000 keyctl update $keyid data [ 150.686666] BUG: unable to handle kernel NULL pointer dereference at 0000000000000001 [ 150.687601] IP: asymmetric_key_free_kids+0x12/0x30 [ 150.688139] PGD 38a3d067 [ 150.688141] PUD 3b3de067 [ 150.688447] PMD 0 [ 150.688745] [ 150.689160] Oops: 0000 [#1] SMP [ 150.689455] Modules linked in: [ 150.689769] CPU: 1 PID: 2478 Comm: keyctl Not tainted 4.11.0-rc4-xfstests-00187-ga9f6b6b8cd2f #742 [ 150.690916] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-20170228_101828-anatol 04/01/2014 [ 150.692199] task: ffff88003b30c480 task.stack: ffffc90000350000 [ 150.692952] RIP: 0010:asymmetric_key_free_kids+0x12/0x30 [ 150.693556] RSP: 0018:ffffc90000353e58 EFLAGS: 00010202 [ 150.694142] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000004 [ 150.694845] RDX: ffffffff81ee3920 RSI: ffff88003d4b0700 RDI: 0000000000000001 [ 150.697569] RBP: ffffc90000353e60 R08: ffff88003d5d2140 R09: 0000000000000000 [ 150.702483] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 150.707393] R13: 0000000000000004 R14: ffff880038a4d2d8 R15: 000000000040411f [ 150.709720] FS: 00007fcbcee35700(0000) GS:ffff88003fd00000(0000) knlGS:0000000000000000 [ 150.711504] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 150.712733] CR2: 0000000000000001 CR3: 0000000039eab000 CR4: 00000000003406e0 [ 150.714487] Call Trace: [ 150.714975] asymmetric_key_free_preparse+0x2f/0x40 [ 150.715907] key_update+0xf7/0x140 [ 150.716560] ? key_default_cmp+0x20/0x20 [ 150.717319] keyctl_update_key+0xb0/0xe0 [ 150.718066] SyS_keyctl+0x109/0x130 [ 150.718663] entry_SYSCALL_64_fastpath+0x1f/0xc2 [ 150.719440] RIP: 0033:0x7fcbce75ff19 [ 150.719926] RSP: 002b:00007ffd5d167088 EFLAGS: 00000206 ORIG_RAX: 00000000000000fa [ 150.720918] RAX: ffffffffffffffda RBX: 0000000000404d80 RCX: 00007fcbce75ff19 [ 150.721874] RDX: 00007ffd5d16785e RSI: 000000002866cd36 RDI: 0000000000000002 [ 150.722827] RBP: 0000000000000006 R08: 000000002866cd36 R09: 00007ffd5d16785e [ 150.723781] R10: 0000000000000004 R11: 0000000000000206 R12: 0000000000404d80 [ 150.724650] R13: 00007ffd5d16784d R14: 00007ffd5d167238 R15: 000000000040411f [ 150.725447] Code: 83 c4 08 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 85 ff 74 23 55 48 89 e5 53 48 89 fb <48> 8b 3f e8 06 21 c5 ff 48 8b 7b 08 e8 fd 20 c5 ff 48 89 df e8 [ 150.727489] RIP: asymmetric_key_free_kids+0x12/0x30 RSP: ffffc90000353e58 [ 150.728117] CR2: 0000000000000001 [ 150.728430] ---[ end trace f7f8fe1da2d5ae8d ]--- Fixes: 4d8c0250b841 ("KEYS: Call ->free_preparse() even after ->preparse() returns an error") Cc: stable@vger.kernel.org # 3.17+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-06-09KEYS: fix dereferencing NULL payload with nonzero lengthEric Biggers1-2/+2
sys_add_key() and the KEYCTL_UPDATE operation of sys_keyctl() allowed a NULL payload with nonzero length to be passed to the key type's ->preparse(), ->instantiate(), and/or ->update() methods. Various key types including asymmetric, cifs.idmap, cifs.spnego, and pkcs7_test did not handle this case, allowing an unprivileged user to trivially cause a NULL pointer dereference (kernel oops) if one of these key types was present. Fix it by doing the copy_from_user() when 'plen' is nonzero rather than when '_payload' is non-NULL, causing the syscall to fail with EFAULT as expected when an invalid buffer is specified. Cc: stable@vger.kernel.org # 2.6.10+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.