aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-01-19arm64: avoid returning from bad_modeMark Rutland2-5/+25
Generally, taking an unexpected exception should be a fatal event, and bad_mode is intended to cater for this. However, it should be possible to contain unexpected synchronous exceptions from EL0 without bringing the kernel down, by sending a SIGILL to the task. We tried to apply this approach in commit 9955ac47f4ba1c95 ("arm64: don't kill the kernel on a bad esr from el0"), by sending a signal for any bad_mode call resulting from an EL0 exception. However, this also applies to other unexpected exceptions, such as SError and FIQ. The entry paths for these exceptions branch to bad_mode without configuring the link register, and have no kernel_exit. Thus, if we take one of these exceptions from EL0, bad_mode will eventually return to the original user link register value. This patch fixes this by introducing a new bad_el0_sync handler to cater for the recoverable case, and restoring bad_mode to its original state, whereby it calls panic() and never returns. The recoverable case branches to bad_el0_sync with a bl, and returns to userspace via the usual ret_to_user mechanism. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Fixes: 9955ac47f4ba1c95 ("arm64: don't kill the kernel on a bad esr from el0") Reported-by: Mark Salter <msalter@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-19HID: wacom: Fix sibling detection regressionJason Gerecke2-8/+18
Commit 345857b ("HID: wacom: generic: Add support for sensor offsets") included a change to the operation and location of the call to 'wacom_add_shared_data' in 'wacom_parse_and_register'. The modifications included moving it higher up so that it would occur before the call to 'wacom_retrieve_hid_descriptor'. This was done to prevent a crash that would have occured when the report containing tablet offsets was fed into the driver with 'wacom_hid_report_raw_event' (specifically: the various 'wacom_wac_*_report' functions were written with the assumption that they would only be called once tablet setup had completed; 'wacom_wac_pen_report' in particular dereferences 'shared' which wasn't yet allocated). Moving the call to 'wacom_add_shared_data' effectively prevented the crash but also broke the sibiling detection code which assumes that the HID descriptor has been read and the various device_type flags set. To fix this situation, we restore the original 'wacom_add_shared_data' operation and location and instead implement an alternative change that can also prevent the crash. Specifically, we notice that the report functions mentioned above expect to be called only for input reports. By adding a check, we can prevent feature reports (such as the offset report) from causing trouble. Fixes: 345857bb49 ("HID: wacom: generic: Add support for sensor offsets") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Tested-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-01-18xfs: fix xfs_mode_to_ftype() prototypeArnd Bergmann2-2/+2
A harmless warning just got introduced: fs/xfs/libxfs/xfs_dir2.h:40:8: error: type qualifiers ignored on function return type [-Werror=ignored-qualifiers] Removing the 'const' modifier avoids the warning and has no other effect. Fixes: 1fc4d33fed12 ("xfs: replace xfs_mode_to_ftype table with switch statement") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-18arm64/ptrace: Reject attempts to set incomplete hardware breakpoint fieldsDave Martin1-0/+4
We cannot preserve partial fields for hardware breakpoints, because the values written by userspace to the hardware breakpoint registers can't subsequently be recovered intact from the hardware. So, just reject attempts to write incomplete fields with -EINVAL. Cc: <stable@vger.kernel.org> # 3.7.x- Fixes: 478fcb2cdb23 ("arm64: Debugging support") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18arm64/ptrace: Avoid uninitialised struct padding in fpr_set()Dave Martin1-0/+1
This patch adds an explicit __reserved[] field to user_fpsimd_state to replace what was previously unnamed padding. This ensures that data in this region are propagated across assignment rather than being left possibly uninitialised at the destination. Cc: <stable@vger.kernel.org> # 3.7.x- Fixes: 60ffc30d5652 ("arm64: Exception handling") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18arm64/ptrace: Preserve previous registers for short regset writeDave Martin1-1/+1
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: <stable@vger.kernel.org> # 4.3.x- Fixes: 5d220ff9420f ("arm64: Better native ptrace support for compat tasks") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18arm64/ptrace: Preserve previous registers for short regset writeDave Martin1-1/+2
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: <stable@vger.kernel.org> # 3.19.x- Fixes: 766a85d7bc5d ("arm64: ptrace: add NT_ARM_SYSTEM_CALL regset") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18arm64/ptrace: Preserve previous registers for short regset writeDave Martin1-3/+4
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET to fill all the registers, the thread's old registers are preserved. Cc: <stable@vger.kernel.org> # 3.7.x- Fixes: 478fcb2cdb23 ("arm64: Debugging support") Signed-off-by: Dave Martin <Dave.Martin@arm.com> Acked-by: Will Deacon <Will.Deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-18ceph: fix bad endianness handling in parse_reply_info_extraJeff Layton1-4/+5
sparse says: fs/ceph/mds_client.c:291:23: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:293:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:294:28: warning: restricted __le32 degrades to integer fs/ceph/mds_client.c:296:28: warning: restricted __le32 degrades to integer The op value is __le32, so we need to convert it before comparing it. Cc: stable@vger.kernel.org # needs backporting for < 3.14 Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18ceph: fix endianness bug in frag_tree_split_cmpJeff Layton1-1/+2
sparse says: fs/ceph/inode.c:308:36: warning: incorrect type in argument 1 (different base types) fs/ceph/inode.c:308:36: expected unsigned int [unsigned] [usertype] a fs/ceph/inode.c:308:36: got restricted __le32 [usertype] frag fs/ceph/inode.c:308:46: warning: incorrect type in argument 2 (different base types) fs/ceph/inode.c:308:46: expected unsigned int [unsigned] [usertype] b fs/ceph/inode.c:308:46: got restricted __le32 [usertype] frag We need to convert these values to host-endian before calling the comparator. Fixes: a407846ef7c6 ("ceph: don't assume frag tree splits in mds reply are sorted") Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18ceph: fix endianness of getattr mask in ceph_d_revalidateJeff Layton1-2/+3
sparse says: fs/ceph/dir.c:1248:50: warning: incorrect type in assignment (different base types) fs/ceph/dir.c:1248:50: expected restricted __le32 [usertype] mask fs/ceph/dir.c:1248:50: got int [signed] [assigned] mask Fixes: 200fd27c8fa2 ("ceph: use lookup request to revalidate dentry") Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18libceph: make sure ceph_aes_crypt() IV is alignedIlya Dryomov1-1/+1
... otherwise the crypto stack will align it for us with a GFP_ATOMIC allocation and a memcpy() -- see skcipher_walk_first(). Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18ceph: fix ceph_get_caps() interruptionYan, Zheng1-1/+6
Commit 5c341ee32881 ("ceph: fix scheduler warning due to nested blocking") causes infinite loop when process is interrupted. Fix it. Signed-off-by: Yan, Zheng <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2017-01-18ovl: fix possible use after free on redirect dir lookupAmir Goldstein1-9/+18
ovl_lookup_layer() iterates on path elements of d->name.name but also frees and allocates a new pointer for d->name.name. For the case of lookup in upper layer, the initial d->name.name pointer is stable (dentry->d_name), but for lower layers, the initial d->name.name can be d->redirect, which can be freed during iteration. [SzM] Keep the count of remaining characters in the redirect path and calculate the current position from that. This works becuase only the prefix is modified, the ending always stays the same. Fixes: 02b69b284cd7 ("ovl: lookup redirects") Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-01-18arm64: mm: avoid name clash in __page_to_voff()Oleksandr Andrushchenko1-1/+1
The arm64 __page_to_voff() macro takes a parameter called 'page', and also refers to 'struct page'. Thus, if the value passed in is not called 'page', we'll refer to the wrong struct name (which might not exist). Fixes: 3fa72fe9c614 ("arm64: mm: fix __page_to_voff definition") Acked-by: Mark Rutland <mark.rutland@arm.com> Suggested-by: Volodymyr Babchuk <Volodymyr_Babchuk@epam.com> Signed-off-by: Oleksandr Andrushchenko <Oleksandr_Andrushchenko@epam.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-17ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LVAdam Ford1-8/+3
This fixes commit ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") where the Card Detect and Write Protect pins were improperly configured. Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-17ARM64: dts: meson-gxbb-odroidc2: Disable SCPI DVFSNeil Armstrong2-1/+5
The current hardware is not able to run with all cores enabled at a cluster frequency superior at 1536MHz. But the currently shipped u-boot for the platform still reports an OPP table with possible DVFS frequency up to 2GHz, and will not change since the off-tree linux tree supports limiting the OPPs with a kernel parameter. A recent u-boot change reports the boot-time DVFS around 100MHz and the default performance cpufreq governor sets the maximum frequency. Previous version of u-boot reported to be already at the max OPP and left the OPP as is. Nevertheless, other governors like ondemand could setup the max frequency and make the system crash. This patch disables the DVFS clock and disables cpufreq. Fixes: 70db166a2baa ("ARM64: dts: meson-gxbb: Add SCPI with cpufreq & sensors Nodes") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-01-17xfs: don't wrap ID in xfs_dq_get_next_idEric Sandeen1-0/+4
The GETNEXTQOTA ioctl takes whatever ID is sent in, and looks for the next active quota for an user equal or higher to that ID. But if we are at the maximum ID and then ask for the "next" one, we may wrap back to zero. In this case, userspace may loop forever, because it will start querying again at zero. We'll fix this in userspace as well, but for the kernel, return -ENOENT if we ask for the next quota ID past UINT_MAX so the caller knows to stop. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: sanity check inode di_modeAmir Goldstein1-0/+3
Check for invalid file type in xfs_dinode_verify() and fail to load the inode structure from disk. Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: sanity check inode mode when creating new dentryAmir Goldstein1-9/+39
The helper xfs_dentry_to_name() is used by 2 different classes of callers: Callers that pass zero mode and don't care about the returned name.type field and Callers that pass non zero mode and do care about the name.type field. Change xfs_dentry_to_name() to not take the mode argument and change the call sites of the first class to not pass the mode argument. Create a new helper xfs_dentry_mode_to_name() which does pass the mode argument and returns -EFSCORRUPTED if mode is invalid. Callers that translate non zero mode to on-disk file type now check the return value and will export the error to user instead of staging an invalid file type to be written to directory entry. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: replace xfs_mode_to_ftype table with switch statementAmir Goldstein3-18/+25
The size of the xfs_mode_to_ftype[] conversion table was too small to handle an invalid value of mode=S_IFMT. Instead of fixing the table size, replace the conversion table with a conversion helper that uses a switch statement. Suggested-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: add missing include dependencies to xfs_dir2.hAmir Goldstein1-0/+3
xfs_dir2.h dereferences some data types in inline functions and fails to include those type definitions, e.g.: xfs_dir2_data_aoff_t, struct xfs_da_geometry. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: sanity check directory inode di_sizeAmir Goldstein2-3/+7
This changes fixes an assertion hit when fuzzing on-disk i_mode values. The easy case to fix is when changing an empty file i_mode to S_IFDIR. In this case, xfs_dinode_verify() detects an illegal zero size for directory and fails to load the inode structure from disk. For the case of non empty file whose i_mode is changed to S_IFDIR, the ASSERT() statement in xfs_dir2_isblock() is replaced with return -EFSCORRUPTED, to avoid interacting with corrupted jusk also when XFS_DEBUG is disabled. Suggested-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17xfs: make the ASSERT() condition likelyAmir Goldstein1-3/+3
The ASSERT() condition is the normal case, not the exception, so testing the condition should be likely(), not unlikely(). Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-17scsi: mpt3sas: fix hang on ata passthrough commandsJames Bottomley2-14/+38
mpt3sas has a firmware failure where it can only handle one pass through ATA command at a time. If another comes in, contrary to the SAT standard, it will hang until the first one completes (causing long commands like secure erase to timeout). The original fix was to block the device when an ATA command came in, but this caused a regression with commit 669f044170d8933c3d66d231b69ea97cb8447338 Author: Bart Van Assche <bart.vanassche@sandisk.com> Date: Tue Nov 22 16:17:13 2016 -0800 scsi: srp_transport: Move queuecommand() wait code to SCSI core So fix the original fix of the secure erase timeout by properly returning SAM_STAT_BUSY like the SAT recommends. The original patch also had a concurrency problem since scsih_qcmd is lockless at that point (this is fixed by using atomic bitops to set and test the flag). [mkp: addressed feedback wrt. test_bit and fixed whitespace] Fixes: 18f6084a989ba1b (mpt3sas: Fix secure erase premature termination) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17scsi: lpfc: Set elsiocb contexts to NULL after freeing itJohannes Thumshirn1-0/+2
Set the elsiocb contexts to NULL after freeing as others depend on it. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17scsi: sd: Ignore zoned field for host-managed devicesDamien Le Moal1-6/+14
There is no good match of the zoned field of the block device characteristics page for host-managed devices. For these devices, the zoning model is derived directly from the device type. So ignore the zoned field for these drives. [mkp: typo] Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17scsi: sd: Fix wrong DPOFUA disable in sd_read_cache_typeDamien Le Moal1-1/+2
Zoned block devices force the use of READ/WRITE(16) commands by setting sdkp->use_16_for_rw and clearing sdkp->use_10_for_rw. This result in DPOFUA always being disabled for these drives as the assumed use of the deprecated READ/WRITE(6) commands only looks at sdkp->use_10_for_rw. Strenghten the test by also checking that sdkp->use_16_for_rw is false. Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17scsi: bfa: fix wrongly initialized variable in bfad_im_bsg_els_ct_request()Johannes Thumshirn1-1/+1
Commit 01e0e15c8b3b ("scsi: don't use fc_bsg_job::request and fc_bsg_job::reply directly") introduced a typo, which causes that the bsg_request variable in bfad_im_bsg_els_ct_request() is initialized to itself instead of pointing to the bsg job's request. Reported-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17scsi: ses: Fix SAS device detection in enclosureEwan D. Milne1-1/+1
The call to scsi_is_sas_rphy() needs to be made on the SAS end_device, not on the SCSI device. Fixes: 835831c57e9b ("ses: use scsi_is_sas_rphy instead of is_sas_attached") Signed-off-by: Ewan D. Milne <emilne@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-17taint/module: Fix problems when out-of-kernel driver defines true or falseLarry Finger3-4/+4
Commit 7fd8329ba502 ("taint/module: Clean up global and module taint flags handling") used the key words true and false as character members of a new struct. These names cause problems when out-of-kernel modules such as VirtualBox include their own definitions of true and false. Fixes: 7fd8329ba502 ("taint/module: Clean up global and module taint flags handling") Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Petr Mladek <pmladek@suse.com> Cc: Jessica Yu <jeyu@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Reviewed-by: Petr Mladek <pmladek@suse.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jessica Yu <jeyu@redhat.com>
2017-01-17PCI/MSI: pci-xgene-msi: Fix CPU hotplug registration handlingMarc Zyngier1-1/+1
The conversion to the new hotplug state machine introduced a regression where a successful hotplug registration would be treated as an error, effectively disabling the MSI driver forever. Fix it by doing the proper check on the return value. Fixes: 9c248f8896e6 ("PCI/xgene-msi: Convert to hotplug state machine") Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Duc Dang <dhdang@apm.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: stable@vger.kernel.org
2017-01-17ubifs: Fix journal replay wrt. xattr nodesRichard Weinberger1-2/+23
When replaying the journal it can happen that a journal entry points to a garbage collected node. This is the case when a power-cut occurred between a garbage collect run and a commit. In such a case nodes have to be read using the failable read functions to detect whether the found node matches what we expect. One corner case was forgotten, when the journal contains an entry to remove an inode all xattrs have to be removed too. UBIFS models xattr like directory entries, so the TNC code iterates over all xattrs of the inode and removes them too. This code re-uses the functions for walking directories and calls ubifs_tnc_next_ent(). ubifs_tnc_next_ent() expects to be used only after the journal and aborts when a node does not match the expected result. This behavior can render an UBIFS volume unmountable after a power-cut when xattrs are used. Fix this issue by using failable read functions in ubifs_tnc_next_ent() too when replaying the journal. Cc: stable@vger.kernel.org Fixes: 1e51764a3c2ac05a ("UBIFS: add new flash file system") Reported-by: Rock Lee <rockdotlee@gmail.com> Reviewed-by: David Gstir <david@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17ubifs: remove redundant checks for encryption keyEric Biggers1-55/+3
In several places, ubifs checked for an encryption key before creating a file in an encrypted directory. This was redundant with fscrypt_setup_filename() or ubifs_new_inode(), and in the case of ubifs_link() it broke linking to special files. So remove the extra checks. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17ubifs: allow encryption ioctls in compat modeEric Biggers1-0/+3
The ubifs encryption ioctls did not work when called by a 32-bit program on a 64-bit kernel. Since 'struct fscrypt_policy' is not affected by the word size, ubifs just needs to allow these ioctls through, like what ext4 and f2fs do. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17ubifs: add CONFIG_BLOCK dependency for encryptionArnd Bergmann1-1/+1
This came up during the v4.10 merge window: warning: (UBIFS_FS_ENCRYPTION) selects FS_ENCRYPTION which has unmet direct dependencies (BLOCK) fs/crypto/crypto.c: In function 'fscrypt_zeroout_range': fs/crypto/crypto.c:355:9: error: implicit declaration of function 'bio_alloc';did you mean 'd_alloc'? [-Werror=implicit-function-declaration] bio = bio_alloc(GFP_NOWAIT, 1); The easiest way out is to limit UBIFS_FS_ENCRYPTION to configurations that also enable BLOCK. Fixes: d475a507457b ("ubifs: Add skeleton for fscrypto") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17ubifs: fix unencrypted journal writePeter Rosin1-0/+1
Without this, I get the following on reboot: UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad target node (type 1) length (8240) UBIFS error (ubi1:0 pid 703): ubifs_load_znode: have to be in range of 48-4144 UBIFS error (ubi1:0 pid 703): ubifs_load_znode: bad indexing node at LEB 13:11080, error 5 magic 0x6101831 crc 0xb1cb246f node_type 9 (indexing node) group_type 0 (no node group) sqnum 546 len 128 child_cnt 5 level 0 Branches: 0: LEB 14:72088 len 161 key (133, inode) 1: LEB 14:81120 len 160 key (134, inode) 2: LEB 20:26624 len 8240 key (134, data, 0) 3: LEB 14:81280 len 160 key (135, inode) 4: LEB 20:34864 len 8240 key (135, data, 0) UBIFS warning (ubi1:0 pid 703): ubifs_ro_mode.part.0: switched to read-only mode, error -22 CPU: 0 PID: 703 Comm: mount Not tainted 4.9.0-next-20161213+ #1197 Hardware name: Atmel SAMA5 [<c010d2ac>] (unwind_backtrace) from [<c010b250>] (show_stack+0x10/0x14) [<c010b250>] (show_stack) from [<c024df94>] (ubifs_jnl_update+0x2e8/0x614) [<c024df94>] (ubifs_jnl_update) from [<c0254bf8>] (ubifs_mkdir+0x160/0x204) [<c0254bf8>] (ubifs_mkdir) from [<c01a6030>] (vfs_mkdir+0xb0/0x104) [<c01a6030>] (vfs_mkdir) from [<c0286070>] (ovl_create_real+0x118/0x248) [<c0286070>] (ovl_create_real) from [<c0283ed4>] (ovl_fill_super+0x994/0xaf4) [<c0283ed4>] (ovl_fill_super) from [<c019c394>] (mount_nodev+0x44/0x9c) [<c019c394>] (mount_nodev) from [<c019c4ac>] (mount_fs+0x14/0xa4) [<c019c4ac>] (mount_fs) from [<c01b5338>] (vfs_kern_mount+0x4c/0xd4) [<c01b5338>] (vfs_kern_mount) from [<c01b6b80>] (do_mount+0x154/0xac8) [<c01b6b80>] (do_mount) from [<c01b782c>] (SyS_mount+0x74/0x9c) [<c01b782c>] (SyS_mount) from [<c0107f80>] (ret_fast_syscall+0x0/0x3c) UBIFS error (ubi1:0 pid 703): ubifs_mkdir: cannot create directory, error -22 overlayfs: failed to create directory /mnt/ovl/work/work (errno: 22); mounting read-only Fixes: 7799953b34d1 ("ubifs: Implement encrypt/decrypt for all IO") Signed-off-by: Peter Rosin <peda@axentia.se> Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17ubifs: ensure zero err is returned on successful returnColin Ian King1-0/+1
err is no longer being set on a successful return path, causing a garbage value being returned. Fix this by setting err to zero for the successful return path. Found with static analysis by CoverityScan, CID 1389473 Fixes: 7799953b34d18 ("ubifs: Implement encrypt/decrypt for all IO") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2017-01-17arm64: Fix swiotlb fallback allocationAlexander Graf1-0/+2
Commit b67a8b29df introduced logic to skip swiotlb allocation when all memory is DMA accessible anyway. While this is a great idea, __dma_alloc still calls swiotlb code unconditionally to allocate memory when there is no CMA memory available. The swiotlb code is called to ensure that we at least try get_free_pages(). Without initialization, swiotlb allocation code tries to access io_tlb_list which is NULL. That results in a stack trace like this: Unable to handle kernel NULL pointer dereference at virtual address 00000000 [...] [<ffff00000845b908>] swiotlb_tbl_map_single+0xd0/0x2b0 [<ffff00000845be94>] swiotlb_alloc_coherent+0x10c/0x198 [<ffff000008099dc0>] __dma_alloc+0x68/0x1a8 [<ffff000000a1b410>] drm_gem_cma_create+0x98/0x108 [drm] [<ffff000000abcaac>] drm_fbdev_cma_create_with_funcs+0xbc/0x368 [drm_kms_helper] [<ffff000000abcd84>] drm_fbdev_cma_create+0x2c/0x40 [drm_kms_helper] [<ffff000000abc040>] drm_fb_helper_initial_config+0x238/0x410 [drm_kms_helper] [<ffff000000abce88>] drm_fbdev_cma_init_with_funcs+0x98/0x160 [drm_kms_helper] [<ffff000000abcf90>] drm_fbdev_cma_init+0x40/0x58 [drm_kms_helper] [<ffff000000b47980>] vc4_kms_load+0x90/0xf0 [vc4] [<ffff000000b46a94>] vc4_drm_bind+0xec/0x168 [vc4] [...] Thankfully swiotlb code just learned how to not do allocations with the FORCE_NO option. This patch configures the swiotlb code to use that if we decide not to initialize the swiotlb framework. Fixes: b67a8b29df ("arm64: mm: only initialize swiotlb when necessary") Signed-off-by: Alexander Graf <agraf@suse.de> CC: Jisheng Zhang <jszhang@marvell.com> CC: Geert Uytterhoeven <geert+renesas@glider.be> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2017-01-17perf/x86/intel: Handle exclusive threadid correctly on CPU hotplugZhou Chengming1-2/+5
The CPU hotplug function intel_pmu_cpu_starting() sets cpu_hw_events.excl_thread_id unconditionally to 1 when the shared exclusive counters data structure is already availabe for the sibling thread. This works during the boot process because the first sibling gets threadid 0 assigned and the second sibling which shares the data structure gets 1. But when the first thread of the core is offlined and onlined again it shares the data structure with the second thread and gets exclusive thread id 1 assigned as well. Prevent this by checking the threadid of the already online thread. [ tglx: Rewrote changelog ] Signed-off-by: Zhou Chengming <zhouchengming1@huawei.com> Cc: NuoHan Qiao <qiaonuohan@huawei.com> Cc: ak@linux.intel.com Cc: peterz@infradead.org Cc: kan.liang@intel.com Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: qiaonuohan@huawei.com Cc: davidcc@google.com Cc: guohanjun@huawei.com Link: http://lkml.kernel.org/r/1484536871-3131-1-git-send-email-zhouchengming1@huawei.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> --- --- arch/x86/events/intel/core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
2017-01-17clocksource/exynos_mct: Clear interrupt when cpu is shut downJoonyoung Shim1-0/+1
When a CPU goes offline a potentially pending timer interrupt is not cleared. When the CPU comes online again then the pending interrupt is delivered before the per cpu clockevent device is initialized. As a consequence the tick interrupt handler dereferences a NULL pointer. [ 51.251378] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [ 51.289348] task: ee942d00 task.stack: ee960000 [ 51.293861] PC is at tick_periodic+0x38/0xb0 [ 51.298102] LR is at tick_handle_periodic+0x1c/0x90 Clear the pending interrupt in the cpu dying path. Fixes: 56a94f13919c ("clocksource: exynos_mct: Avoid blocking calls in the cpu hotplug notifier") Reported-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Cc: cw00.choi@samsung.com Cc: daniel.lezcano@linaro.org Cc: stable@vger.kernel.org Cc: javier@osg.samsung.com Cc: kgene@kernel.org Cc: krzk@kernel.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1484628876-22065-1-git-send-email-jy0922.shim@samsung.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-01-16net sched actions: fix refcnt when GETing of action after bindJamal Hadi Salim1-3/+2
Demonstrating the issue: .. add a drop action $sudo $TC actions add action drop index 10 .. retrieve it $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 29 sec used 29 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... bug 1 above: reference is two. Reference is actually 1 but we forget to subtract 1. ... do a GET again and we see the same issue try a few times and nothing changes ~$ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 0 installed 31 sec used 31 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 ... lets try to bind the action to a filter.. $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 ... and now a few GETs: $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 3 bind 1 installed 204 sec used 204 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 4 bind 1 installed 206 sec used 206 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 5 bind 1 installed 235 sec used 235 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 .... as can be observed the reference count keeps going up. After the fix $ sudo $TC actions add action drop index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 4 sec used 4 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 1 bind 0 installed 6 sec used 6 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC qdisc add dev lo ingress $ sudo $TC filter add dev lo parent ffff: protocol ip prio 1 \ u32 match ip dst 127.0.0.1/32 flowid 1:1 action gact index 10 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 32 sec used 32 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 $ sudo $TC -s actions get action gact index 10 action order 1: gact action drop random type none pass val 0 index 10 ref 2 bind 1 installed 33 sec used 33 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 Fixes: aecc5cefc389 ("net sched actions: fix GETing actions") Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16scsi: libfc: Fix variable name in fc_set_wwpnFam Zheng1-3/+3
The parameter name should be wwpn instead of wwnn. Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-01-16net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOVJack Morgenstein1-9/+14
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420f9d2 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9cb50d ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT transitionsJack Morgenstein1-2/+3
Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf42cd ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16net/mlx4_core: Fix racy CQ (Completion Queue) freeJack Morgenstein1-18/+20
In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5cf17b ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registeredHeiner Kallweit1-9/+10
Don't use netdev_info and friends before the net_device is registered. This avoids ugly messages like "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer" Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16net/mlx5e: Fix a -Wmaybe-uninitialized warningArnd Bergmann1-4/+7
As found by Olof's build bot, we gain a harmless warning about a potential uninitialized variable reference in mlx5: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair that gcc is unfortunately unable to completely figure out. The problem being gcc cannot tell that if(IS_ERR()) in mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later, so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'. The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect by gcc, so it can't get that wrong, so it no longer warns. Hadar Hen Zion already attempted to fix the warning earlier by adding fake initializations, but that ended up not fully addressing all warnings, so I'm reverting it now that it is no longer needed. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/ Fixes: a42485eb0ee4 ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes") Fixes: a757d108dc1a ("net/mlx5e: Fix kbuild warnings for uninitialized parameters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16ax25: Fix segfault after sock connection timeoutBasil Gunn1-1/+1
The ax.25 socket connection timed out & the sock struct has been previously taken down ie. sock struct is now a NULL pointer. Checking the sock_flag causes the segfault. Check if the socket struct pointer is NULL before checking sock_flag. This segfault is seen in timed out netrom connections. Please submit to -stable. Signed-off-by: Basil Gunn <basil@pacabunga.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-16bpf: rework prog_digest into prog_tagDaniel Borkmann9-21/+24
Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.