aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2017-02-10powerpc/bpf: Introduce __PPC_SH64()Naveen N. Rao2-6/+6
Introduce __PPC_SH64() as a 64-bit variant to encode shift field in some of the shift and rotate instructions operating on double-words. Convert some of the BPF instruction macros to use the same. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/pseries: Automatically resize HPT for memory hot add/removeDavid Gibson3-0/+34
We've now implemented code in the pseries platform to use the new PAPR interface to allow resizing the hash page table (HPT) at runtime. This patch uses that interface to automatically attempt to resize the HPT when memory is hot added or removed. This tries to always keep the HPT at a reasonable size for our current memory size. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/pseries: Advertise HPT resizing support via CASDavid Gibson2-1/+2
The hypervisor needs to know a guest is capable of using the HPT resizing PAPR extension in order to make full advantage of it for memory hotplug. If the hypervisor knows the guest is HPT resize aware, it can size the initial HPT based on the initial guest RAM size, relying on the guest to resize the HPT when more memory is hot-added. Without this, the hypervisor must size the HPT for the maximum possible guest RAM, which can lead to a huge waste of space if the guest never actually expends to that maximum size. This patch advertises the guest's support for HPT resizing via the ibm,client-architecture-support OF interface. We use bit 5 of byte 6 of option vector 5 for this purpose, as defined in the PAPR ACR "HPT resizing option". Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-10powerpc/pseries: Add support for hash table resizingDavid Gibson3-0/+143
This adds support for using two hypercalls to change the size of the main hash page table while running as a PAPR guest. For now these hypercalls are only in experimental qemu versions. The interface is two part: first H_RESIZE_HPT_PREPARE is used to allocate and prepare the new hash table. This may be slow, but can be done asynchronously. Then, H_RESIZE_HPT_COMMIT is used to switch to the new hash table. This requires that no CPUs be concurrently updating the HPT, and so must be run under stop_machine(). This also adds a debugfs file which can be used to manually control HPT resizing or testing purposes. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> [mpe: Rename the debugfs file to "hpt_order"] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/pseries: Add hypercall wrappers for hash page table resizingDavid Gibson4-2/+18
This adds the hypercall numbers and wrapper functions for the hash page table resizing hypercalls. These hypercall numbers are defined in the PAPR ACR "HPT resizing option". It also adds a new firmware feature flag to track the presence of the HPT resizing calls. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09Documentation: powerpc/fsl: Update compatible for l2cache bindingChris Packham1-2/+40
List all the current valid compatible strings for the l2cache binding. This should stop checkpatch.pl from complaining and will hopefully save someone from having to debug a typo in their dts. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/opal-lpc: Remove unneeded includeBenjamin Herrenschmidt1-1/+0
We don't need asm/xics.h Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/opal-irqchip: Use interrupt names if presentBenjamin Herrenschmidt1-13/+42
Recent versions of OPAL can provide names for the various OPAL interrupts, so let's use them. This also modernises the code that fetches the interrupt array to use the helpers provided by the generic code instead of hand-parsing the property. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Free irqs on error, check allocation of names, consolidate error handling, whitespace.] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/powernv: Display the correct error info for CAPP errors.Mahesh Salgaonkar1-1/+2
On some CAPP errors we see console messages that prints unknown HMIs for which CAPI recovery is in progress. This patch fixes this by printing correct error info for HMI generated due to CAPP recovery. Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/powernv: Add XHCI and USB storage to defconfigMichael Neuling1-1/+2
These are common on bare metal machines, so put them in the defconfig. This adds 216KB to the vmlinux size Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-09powerpc/64: Include bpf/bcc related config options in defconfigsNaveen N. Rao3-0/+21
Specifically: - CONFIG_BPF_SYSCALL - CONFIG_NET_SCHED - CONFIG_NET_CLS_BPF - CONFIG_NET_CLS_ACT - CONFIG_NET_ACT_BPF - CONFIG_CGROUP_BPF - CONFIG_UPROBE_EVENT ... in pseries, ppc64 and powernv defconfigs. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07m68k/mac: Replace via-maciisi driver with via-cuda driverFinn Thain8-776/+30
Change the device probe test in the via-cuda.c driver so it will load on Egret-based machines too. Remove the now redundant via-maciisi.c driver. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Add support for Egret system controllerFinn Thain1-21/+134
The Egret system controller was the predecessor to the Cuda and the differences are minor. On Cuda, byte acknowledgement requires one transition of the TACK signal; on Egret two are needed. On Cuda, TIP is active low; on Egret it is active high. And Cuda raises certain interrupts that Egret omits. Accomodating these differences complicates the Cuda driver slightly but avoids a lot of duplication (see next patch). Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Initialize data_index early and increment consistentlyFinn Thain1-3/+3
Initialize data_index where appropriate to improve readability and assist debugging. This change doesn't affect driver behaviour. I prefer to see current_req->data[data_index++] in place of current_req->data[0] or current_req->data[1] inasmuchas it becomes obvious what the data_index variable does. Moreover, the actual value of data_index when examined at any given moment tells me something about prior events, which did prove helpful. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Use spinlock_irq_save/restore instead of enable/disable_irqFinn Thain1-11/+5
The cuda_start() function uses spinlock_irq_save/restore for mutual exclusion. Let's have cuda_poll() do the same when polling the VIA interrupt. The benefit to disabling local irqs when the interrupt is being polled is that the interrupt handler now has the same timing properties regardless of whether it is invoked normally or from cuda_poll(). This driver was written back when local irqs remained enabled during execution of interrupt handlers and cuda_poll() was probably trying to achieve the same effect by use of enable/disable_irq. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Avoid TREQ race conditionFinn Thain1-4/+3
When a read transaction completes, one of several things will happen: a new transfer is started by the driver, a new transfer request is raised by the Cuda (i.e. TREQ asserted), or both happen at once. When both happen at once, there is a race condition between the TREQ test in the read_done state and the same test in cuda_start(). Moreover, the former test uses a stale TREQ value. Theoretically, this can result in the undesirable outcome that the interrupt handler completes with the state machine 'idle' when it should instead start the next transaction. Avoid this race by calling cuda_start() first and then confirming that it succeeded. If not, test the current TREQ value before entering the 'reading' state. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Fix re-initialization of reply_ptr and reading_replyFinn Thain1-2/+2
When reading_reply is set, reply_ptr points into an adb_request struct. Conversely, when reply_ptr instead points into the global cuda_rbuf, reading_reply must be false. Unfortunately, this rule can be violated because re-initialization of reply_ptr and reading_reply presently depends on the TREQ input. Fix this by re-initializing reply_ptr and reading_reply as soon as they are known to be invalid. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Prevent read buffer overflowFinn Thain1-1/+7
If the Cuda driver does not enter the 'read_done' state for some reason, it may continue in the 'reading' state until the buffer overflows. Add a bounds check to prevent this. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Add TREQ, TIP and TACK signal helpersFinn Thain1-23/+53
Introduce some helpers for handling the signalling between VIA and Cuda. This abstraction will be used to add support for Egret devices, which utilize slightly different signalling. Don't invert the sense of the Cuda's active-low signals when storing them in the 'status' variable. Just assert, negate and test those signals using the helpers. The state machine does not need to test its own output signals to figure out what to do next: the next state depends on the Cuda's TREQ output. Just call the TREQ_asserted() helper function to test for that. Similarly, there is no need to store pin directions in the 'status' variable. That was only useful for debugging messages. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Remove redundant temporary variableFinn Thain1-6/+2
There is no possibility that current_req can change during execution of cuda_start(). This can be confirmed by inspection: cuda_lock is always held whenever cuda_start() is called or current_req is modified. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07via-cuda: Cleanup printk callsFinn Thain1-20/+6
Add missing log message severity, remove old debug messages and replace printk() loop with print_hex_dump() call. Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07powerpc/mm: Add MMU_FTR_KERNEL_RO to possible feature maskAneesh Kumar K.V1-0/+1
Without this we will always find the feature disabled. Fixes: 984d7a1ec6 ("powerpc/mm: Fixup kernel read only mapping") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07powerpc/64s: Use (start, size) rather than (start, end) for exception handlersNicholas Piggin2-168/+185
start,size has the benefit of being easier to search for (start,end usually gives you the preceeding vector from the one you want, as first result). Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-07powerpc/64s: Tidy up after exception handler reworkNicholas Piggin2-81/+81
Somewhere along the line, search/replace left some naming garbled, and untidy alignment (aka. mpe stuffed it up). Might as well fix them all up now while git blame history doesn't extend too far. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc: Add new cache geometry aux vectorsBenjamin Herrenschmidt4-1/+58
This adds AUX vectors for the L1I,D, L2 and L3 cache levels providing for each cache level the size of the cache in bytes and the geometry (line size and number of ways). We chose to not use the existing alpha/sh definition which packs all the information in a single entry per cache level as it is too restricted to represent some of the geometries used on POWER. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Hard code cache geometry on POWER8Benjamin Herrenschmidt1-2/+18
All shipping firmware versions have it wrong in the device-tree Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Add L2 and L3 cache shape infoBenjamin Herrenschmidt2-5/+23
Retrieved from device-tree when available Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Clean up ppc64_caches using a struct per cacheBenjamin Herrenschmidt6-122/+119
We have two set of identical struct members for the I and D sides and mostly identical bunches of code to parse the device-tree to populate them. Instead make a ppc_cache_info structure with one copy for I and one for D Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Retrieve number of L1 cache sets from device-treeBenjamin Herrenschmidt2-2/+28
It will be used to calculate the associativity Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc/64: Fix naming of cache block vs. cache lineBenjamin Herrenschmidt9-68/+75
In a number of places we called "cache line size" what is actually the cache block size, which in the powerpc architecture, means the effective size to use with cache management instructions (it can be different from the actual cache line size). We fix the naming across the board and properly retrieve both pieces of information when available in the device-tree. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc: Remove obsolete comment about patching instructionsBenjamin Herrenschmidt1-3/+0
We don't patch instructions based on the cache lines or block sizes these days. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc: Move {d,i,u}cache_bsize definitions to a common placeBenjamin Herrenschmidt3-16/+9
The variables are defined twice in setup_32.c and setup_64.c, do it once in setup-common.c instead Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-06powerpc: Move ARCH_DLINFO out of uapiBenjamin Herrenschmidt2-23/+22
It's an kernel private macro, it doesn't belong there Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-03powerpc: Enable support for GCC pluginsAndrew Donnellan2-0/+9
Enable support for GCC plugins on powerpc. Add an additional version check in gcc-plugins-check to advise users to upgrade to gcc 5.2+ on powerpc to avoid issues with header files (gcc <= 4.6) or missing copies of rs6000-cpus.def (4.8 to 5.1 on 64-bit targets). Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-03powerpc: Correctly disable latent entropy GCC plugin on prom_init.oAndrew Donnellan1-1/+1
Commit 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") excludes certain powerpc early boot code from the latent entropy plugin by adding appropriate CFLAGS. It looks like this was supposed to cover prom_init.o, but ended up saying init.o (which doesn't exist) instead. Fix the typo. Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-03gcc-plugins: Fix definition of DISABLE_LATENT_ENTROPY_PLUGINAndrew Donnellan1-1/+1
The variable DISABLE_LATENT_ENTROPY_PLUGIN is defined when CONFIG_PAX_LATENT_ENTROPY is set. This is leftover from the original PaX version of the plugin code and doesn't actually exist. Change the condition to depend on CONFIG_GCC_PLUGIN_LATENT_ENTROPY instead. Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-03cxl: Fix build when CONFIG_DEBUG_FS=nAndrew Donnellan2-5/+57
Stub out the debugfs functions so that the build doesn't break when CONFIG_DEBUG_FS=n. Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/pseries: Report DLPAR capabilitiesNathan Fontenot1-1/+7
As we add the ability to do DLPAR of additional devices through the sysfs interface we need to know which devices are supported. This adds the reporting of supported devices with a comma separated list reported in the existing /sys/kernel/dlpar. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/pseries: Update affinity for memory and cpus specified in a PRRN eventJohn Allen2-1/+40
Extend the existing PRRN infrastructure to perform the actual affinity updating for cpus and memory in addition to the device tree updating. For cpus, dynamic affinity updating already appears to exist in the kernel in the form of arch_update_cpu_topology(). For memory, we must place a READD operation on the hotplug queue for any phandle included in the PRRN event that is determined to be an LMB. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/pseries: Introduce memory hotplug READD operationJohn Allen2-0/+42
Currently, memory must be hot removed and subsequently re-added in order to dynamically update the affinity of LMBs specified by a PRRN event. Earlier implementations of the PRRN event handler ran into issues in which the hot remove would occur successfully, but a hotplug event would be initiated from another source and grab the hotplug lock preventing the hot add from occurring. To prevent this situation, this patch introduces the notion of a hot "readd" action for memory which atomizes a hot remove and a hot add into a single, serialized operation on the hotplug queue. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Reviewed-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/pseries: Make the acquire/release of the drc for memory a seperate stepJohn Allen1-12/+22
When adding and removing LMBs we should make the acquire/release of the DRC a separate step to allow for a few improvements. First this will ensure that LMBs removed during a remove by count operation are all available if a error occurs and we need to add them back. By first removeing all the LMBs from the kernel before releasing their DRCs the LMBs are available to add back should an error occur. Also, this will allow for faster re-add operations of memory for PRRN event handling since we can skip the unneeded step of having to release the DRC and the acquire it back. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/xmon: Cleanup to use is_kernel_addr macroMadhavan Srinivasan1-4/+4
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/boot: Update .gitignoreMichael Ellerman1-0/+4
Add a few things that have been missed from .gitignore over the years. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/debug: PTDUMP should depend on DEBUG_FSMichael Ellerman1-2/+1
CONFIG_PPC_PTDUMP currently selects CONFIG_DEBUG_FS. But CONFIG_DEBUG_FS is user-selectable, so we shouldn't select it. Instead depend on it. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/64: Add BPF_JIT to powernv and pseries defconfigsAnton Blanchard2-0/+2
Commit db9112173b18 ("powerpc: Turn on BPF_JIT in ppc64_defconfig") only added BPF_JIT to the ppc64 defconfig. Add it to our powernv and pseries defconfigs too. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/64: Move HAVE_CONTEXT_TRACKING from pseries to common KconfigAnton Blanchard2-1/+1
We added support for HAVE_CONTEXT_TRACKING, but placed the option inside PPC_PSERIES. This has the undesirable effect that NO_HZ_FULL can be enabled on a kernel with both powernv and pseries support, but cannot on a kernel with powernv only support. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/sparse: Constify the address pointer in __get_user_nosleep()Daniel Axtens1-1/+1
In __get_user_nosleep, we create an intermediate pointer for the user address we're about to fetch. We currently don't tag this pointer as const. Make it const, as we are simply dereferencing it, and it's scope is limited to the __get_user_nosleep macro. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/sparse: Constify the address pointer in __get_user_nocheck()Daniel Axtens1-1/+1
In __get_user_nocheck, we create an intermediate pointer for the user address we're about to fetch. We currently don't tag this pointer as const. Make it const, as we are simply dereferencing it, and it's scope is limited to the __get_user_nocheck macro. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/sparse: Constify the address pointer in __get_user_check()Daniel Axtens1-1/+1
In __get_user_check, we create an intermediate pointer for the user address we're about to fetch. We currently don't tag this pointer as const. Make it const, as we are simply dereferencing it, and it's scope is limited to the __get_user_check macro. Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-02powerpc/powernv: Fix section mismatch from opal_lpc_init()Michael Ellerman1-1/+1
opal_lpc_init() is called from an __init routine, and calls other __init routines, so should also be __init, init? Fixes: 023b13a50183 ("powerpc/powernv: Add support for direct mapped LPC on POWER9") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.