aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/call-graph-from-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-05-11ath10k: suppress warnings when getting wmi peer_rate_code_list eventVasanthakumar Thiagarajan1-0/+1
In 10.4, fw sends WMI PEER_RATECODE_LIST_EVENTID after successful peer_assoc cmd. As of now this event is not of much use and not implemented. Change the debug level and messsage as appropriate to suppress "Unknown eventid: 36898". Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-11wil6210: add support for device led configurationMaya Erez5-0/+281
Add the ability to configure the device led to be used for notifying the AP activity (60G device supports leds 0-2). The host can also configure the blinking frequency of the led in three states. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-09ath9k: Fix symbol overlap window for half/quarter channelsHelmut Schaa1-1/+1
Since commit cd6cfd7311a385144a2f9c74f692ae2df3ae033f "ath9k: do not set half/quarter channel flags in AR_PHY_MODE" the condition "rfMode & (AR_PHY_MODE_QUARTER | AR_PHY_MODE_HALF)" would never evaluate to true. Fix this by using the available IS_CHAN_HALF_RATE and IS_CHAN_QUARTER_RATE marcros instead. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Felix Fietkau <nbd@openwrt.org> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-09ath9k: Simplify ar9003_hw_tx99_set_txpowerHelmut Schaa1-7/+3
There's no need to keep the same for loop twice in the code. Move the txpower cap before the loop to reduce code complexity. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-09ath9k: Move TX99 config option under ath9k debuggingHelmut Schaa1-20/+20
Since ATH9K_TX99 depends on ATH9K_DEBUGFS anyway move it there such that "make menuconfig" will indent TX99 support below ath9k debugging. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-09ath9k: reuse ar9003_hw_tx_power_regwrite for tx99 setupHelmut Schaa3-58/+5
The same functionality as ar9003_hw_tx_power_regwrite is hardcoded in ar9003_hw_tx99_set_txpower. Just reuse the existing ar9003_hw_tx_power_regwrite for TX99 setup too. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: release pre_cal_file while unloading driverRajkumar Manoharan1-0/+4
Failing to release pre_cal_file caldata on deinit causes memory leak. Fixes: b131129d9657 ("ath10k: fix calibration init sequence of qca99x0") Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: update bss channel survey informationRajkumar Manoharan4-0/+70
During hw scan, firmware sends two channel information events (pre- complete, complete) to host for each channel change. The snap shot of cycle counters (rx_clear and total) between these two events are given for survey dump. In order to get latest survey statistics of all channels, a scan request has to be issued. In general, an AP DUT is brought up, it won't leave BSS channel except few cases like overlapping bss or radar detection. So survey statistics of bss channel is always referring to older data that are collected before starting AP (either ACS/OBSS scan). To collect latest survey information from target, firmware provides WMI interface to read cycle counters from hardware. For each survey dump request, BSS channel cycle counters are read and cleared in hardware. This makes sure that behavior is in align with ath9k survey report. So survey dump always gives snap shot of cycle counters b/w two survey requests. Signed-off-by: Yanbo Li <yanbol@qca.qualcomm.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: handle pdev_chan_info wmi eventRajkumar Manoharan2-0/+43
Add handler to process bss channel information wmi event that will be received upon sending pdev_chan_info_request wmi command. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: implement wmi_pdev_bss_chan_info_requestRajkumar Manoharan3-1/+55
Add WMI ops to send pdev_bss_chan_info_request command to target. This command will be used to retrieve updated cycle counters and noise floor value of current operating channel (bss channel). Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: add pdev bss channel info wmi definitionsRajkumar Manoharan1-0/+4
Add WMI definitions for pdev bss channel information request and event. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: fix kernel panic, move arvifs list head init before htt initAnilkumar Kolli1-4/+4
It is observed that while loading and unloading ath10k modules in an infinite loop, before ath10k_core_start() completion HTT rx frames are received, while processing these frames, dereferencing the arvifs list code is getting hit before initilizing the arvifs list, causing a kernel panic. This patch initilizes the arvifs list before initilizing htt. Fixes the below issue: [<bf88b058>] (ath10k_htt_rx_pktlog_completion_handler+0x278/0xd08 [ath10k_core]) [<bf88b058>] (ath10k_htt_rx_pktlog_completion_handler [ath10k_core]) [<bf88c0dc>] (ath10k_htt_txrx_compl_task+0x5f4/0xeb0 [ath10k_core]) [<bf88c0dc>] (ath10k_htt_txrx_compl_task [ath10k_core]) [<c0234100>] (tasklet_action+0x8c/0xec) [<c0234100>] (tasklet_action) [<c02337c0>] (__do_softirq+0xf8/0x228) [<c02337c0>] (__do_softirq) [<c0233920>] (run_ksoftirqd+0x30/0x90) Code: e5954ad8 e2899008 e1540009 0a00000d (e5943008) ---[ end trace 71de5c2e011dbf56 ]--- Kernel panic - not syncing: Fatal exception in interrupt Fixes: 500ff9f9389d ("ath10k: implement chanctx API") Cc: <stable@vger.kernel.org> Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: move spectral related structures under ath10k debugfsMohammed Shafi Shajakhan1-2/+1
Spectral related structures are accessed / modified only if ath10k debugfs is enabled, so it makes more sense to move them under ATH10K_DEBUGFS Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-05-06ath10k: remove VHT capabilities from 2.4GHzJohannes Berg1-3/+0
According to the spec, VHT doesn't exist in 2.4GHz. There are vendor extensions to allow a subset of VHT to work (notably 256-QAM), but since mac80211 doesn't support those advertising VHT capability on 2.4GHz leads to the behaviour of reporting VHT capabilities but not being able to use any of them due to mac80211's code requiring 80 MHz support. Remove the VHT capabilities from 2.4GHz for now. If mac80211 gets extended to use the (likely Broadcom) vendor IEs for it and handles the lack of 80 MHz support, it can be added back. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-27wcn36xx: Set SMD timeout to 10 secondsBjorn Andersson1-1/+1
After booting the wireless subsystem and uploading the NV blob to the WCNSS_CTRL service the remote continues to do things and will not start servicing wlan-requests for another 2-5 seconds (measured). The downstream code does not have any special handling for this case, but has a timeout of 10 seconds for the communication layer. By extending the wcn36xx timeout to match this we follows the same flow for the boot procedure and can successfully configure WiFi as wlan0 is registered. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: prevent deep sleep of 60G device in critical pathsMaya Erez5-32/+194
In idle times 60G device can enter deep sleep and turn off its XTAL clock. Host access triggers the device power-up flow which will hold the AHB during XTAL stabilization until device switches from slow-clock to XTAL clock. This behavior can stall the PCIe bus for some arbitrary period of time. In order to prevent this stall, host can vote for High Latency Access Policy (HALP) before reading from PCIe bus. This vote will wakeup the device from deep sleep and prevent deep sleep until unvote is done. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: unmask RX_HTRSH interrupt only when connectedMaya Erez2-1/+22
RX_HTRSH interrupt sometimes triggered during device reset procedure. To prevent handling this interrupt when not required, unmask this interrupt only if we are connected and mask it when disconnected. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: print debug message when transmitting while disconnectedMaya Erez3-1/+19
Network stack can try to transmit data while AP / STA is disconnected. Change this print-out to debug level as this should not be handled as error. This patch also adds wil_dbg_ratelimited, used to limit the above print-out. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: change RX_HTRSH interrupt print level to debugMaya Erez1-5/+2
When using interrupt moderation RX_HTRSH interrupt can occur frequently during high throughput and should not be considered as error. Such print-outs can degrade the performance hence should be printed in debug print level. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: support regular scan on P2P_DEVICE interfaceLior David3-2/+10
P2P search can only run on the social channel (channel 2). When issuing a scan request on the P2P_DEVICE interface, driver ignored the channels argument and always performed a P2P search. Fix this by checking the channels argument, if it is not specified (meaning full scan) or if a non-social channel was specified, perform a regular scan and not a P2P search. Signed-off-by: Lior David <qca_liord@qca.qualcomm.com> Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26wil6210: add function name to wil log macrosMaya Erez2-6/+10
Add __func__ to wil_err and wil_info for easier debugging. Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath6kl: add ability to set debug uart baud rateSteve deRosier3-0/+12
It's useful to permit the customization of the debug uart baud rate. Enable this and send down the value to the chip if we're enabling debug. Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath6kl: fix missing uart debug pin for 6004 HW 3.0Steve deRosier1-0/+1
For some reason, the 6004 HW 3.0 definition was missing the value for the uarttx_pin (used for firmware debug). This corrects this situation. Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath10k: fix a typo in ath10k_start()Mohammed Shafi Shajakhan1-1/+1
fix a typo (spelling mistake) in 'ath10k_start' Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26ath10k: add max_tx_power for QCA6174 WLAN.RM.2.0 firmwareAlan Liu2-0/+2
QCA6174 WLAN.RM.2.0 firmware uses max_tx_power instead of using max_reg_power to set transmission power. The tx power was about -50dbm, after applying this change, it become -32dbm. Signed-off-by: Alan Liu <alanliu@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-26iwlwifi: fix fw version reading for DVM devicesLuca Coelho2-1/+6
In commit 97f95c93c8ed ("iwlwifi: remove support for fw older than -16.ucode") we accidentally changed the fw version reading code for DVM devices. The code intended to remove the old fw version API, because all MVM firmwares version 16 and above that we support don't use it anymore. But DVM devices still use the old FW API. Fix that by bringing the code back in. Reported-by: Pat Erley <pat-lkml@erley.org> Tested-by: Kalle Valo <kvalo@codeaurora.org> Fixes: 97f95c93c8ed ("iwlwifi: remove support for fw older than-16.ucode") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rt2800lib: enable MFP if hw crypt is disabledChun-Yeow Yeoh1-0/+4
If rt2800usb is loaded with nohwcrypt=1, mac80211 takes care of the crypto with software encryption/decryption and thus, MFP can be used. Tested for secured mesh using ath9k_htc and ath9k. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26brcmfmac: testing the wrong variable in brcmf_rx_hdrpull()Dan Carpenter1-1/+1
Smatch complains about this code: drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c:335 brcmf_rx_hdrpull() error: we previously assumed '*ifp' could be null (see line 333) The problem is that we recently changed these from "ifp" to "*ifp" but there was one that we didn't update. - if (ret || !ifp || !ifp->ndev) { + if (ret || !(*ifp) || !(*ifp)->ndev) { if (ret != -ENODATA && ifp) ^^^ - ifp->stats.rx_errors++; + (*ifp)->stats.rx_errors++; I have updated it to *ifp as well. We always call this function is a non-NULL "ifp" pointer, btw. Fixes: c462ebcdfe42 ('brcmfmac: create common function for handling brcmf_proto_hdrpull()') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: fix loop timeout in mwifiex_prog_fw_w_helper()Dan Carpenter1-3/+4
USB8XXX_FW_MAX_RETRY is 3. We were using a post-op loop "while (retries--) {" but then the lines after that assume the loop exits with retries set to zero. I've fixed this by changing to a pre-op loop. I started with retries set to 4 instead of 3 so that we still go through the loop the same number of times. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: missing error code on allocation failureDan Carpenter1-1/+3
We accidentally return success instead of -ENOMEM. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_iqk_phy_iq_bb_regJes Sorensen1-4/+4
There is nothing 8723au specific about rtl8723au_iqk_phy_iq_bb_reg so rename the array to rtl8xxxu_iqk_phy_iq_bb_reg. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_simularity_compare()Jes Sorensen1-8/+14
This renames rtl8723bu_simularity_compare() to rtl8xxxu_gen2_simularity_compare() to reflect it is used for all gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723b_channel_to_group()Jes Sorensen1-3/+3
This renames rtl8723b_channel_to_group() to rtl8xxxu_gen2_channel_to_group() to reflect it is used by all currently supported gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_mac_init_table to rtl8xxxu_gen1_mac_init_tableJes Sorensen1-3/+3
All currently supported gen1 parts use the same mac_init_table, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_enable_rf() to rtl8xxxu_gen1_enable_rf()Jes Sorensen1-3/+3
All gen1 parts use the same enable_rf() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_set_tx_power() to rtl8xxxu_gen1_set_tx_power()Jes Sorensen1-3/+3
All gen1 parts use the same interface for setting TX power, so rename the function to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_init_phy_bb() to rtl8xxxu_gen1_init_phy_bb()Jes Sorensen1-3/+3
All gen1 parts use the same init_phy_bb() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_phy_iq_calibrate() to rtl8xxxu_gen1_phy_iq_calibrate()Jes Sorensen1-3/+3
All supported gen1 parts use the same phy_iq_calibrate() function (unlike their gen2 counterparts). Rename the function to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_update_rate_mask() to rtl8xxxu_update_rate_mask()Jes Sorensen1-4/+4
All currently supported gen1 parts use the same function for updating the rate mask, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_config_channel() to rtl8xxxu_gen1_config_channel()Jes Sorensen1-3/+3
All supported gen1 parts use the same config_channel() function, so rename it to reflect this. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723a_disable_rf() to rtl8xxxu_gen1_disable_rf()Jes Sorensen1-3/+3
All currently supported gen1 parts use the same disable_rf() routine, so rename the function to reflect that. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723b_disable_rf() to rtl8xxxu_gen2_disable_rf()Jes Sorensen1-3/+3
At least for now, all gen2 parts use the same disable_rf() function Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_config_channel() to rtl8xxxu_gen2_config_channel()Jes Sorensen1-3/+3
Rename the function to indicate it is applicable to most/all gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723au_report_connect() to rtl8xxxu_gen1_report_connect()Jes Sorensen1-4/+4
Rename the function to reflect it is for all/most gen1 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_report_connect() to rtl8xxxu_gen2_report_connect()Jes Sorensen1-4/+4
Make the name reflect this is for most/all gen2 parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26rtl8xxxu: Rename rtl8723bu_update_rate_mask() to rtl8xxxu_gen2_update_rate_mask()Jes Sorensen1-4/+4
Update the name of rtl8723bu_update_rate_mask() to make it reflect it's applicable for all/most gen2 N parts. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: stop background scan when net device closedXinming Hu1-7/+7
Transmit data path should not touch background scan. We will stop background scan when net device is closed. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-26mwifiex: add platform specific wakeup interrupt supportXinming Hu4-3/+106
On some arm-based platforms, we need to configure platform specific parameters by device tree node and also define our node as a child node of parent SDIO host controller. This patch parses these parameters from device tree. It includes calibration data dowoload to firmware, wakeup pin configured to firmware, and soc specific wake up gpio, which will be set as wakeup interrupt pin. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>