| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Update prelim_ref_insert() to use rb_find_add_cached().
There is a special change that the existing prelim_ref_compare() is
called with the first parameter as the existing ref in the rbtree.
But the newer rb_find_add_cached() expects the cmp() function to have
the first parameter as the to-be-added node, thus the new helper
prelim_ref_rb_add_cmp() need to adapt this new order.
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Update fs/btrfs/block-group.c to use rb_find_add_cached().
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Adds rb_find_add_cached() as a helper function for use with red-black
trees. Used in btrfs to reduce boilerplate code.
And since it's a new helper, the cmp() function will require both
parameter to be const rb_node pointers.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The header clearly states that it does not want to be included directly,
only via linux/spinlock_types.h. Drop this as we can simply use the
spinlock.h which is already included.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
During free space tree rebuild, we're holding a transaction handle for
the whole rebuild process.
This can lead to blocked task warning, e.g. btrfs-transaction kthread
(which is already created before btrfs_start_pre_rw_mount()) can be
waked up to join and commit the current transaction.
But the free space tree rebuild process may need to go through thousands
block groups, this will block btrfs-transaction kthread for a long time.
Fix the problem by calling btrfs_should_end_transaction() after each
block group, so that we won't hold the transaction handle too long.
And since the free-space-tree rebuild can be split into
multiple transactions, we need to consider the safety when the rebuild
process is interrupted.
Thankfully since we only set the FREE_SPACE_TREE compat_ro flag without
FREE_SPACE_TREE_VALID flag, even if the rebuild is interrupted, on the
next RW mount, we will still go rebuild the free space tree, by deleting
any items we have and re-starting the rebuild from scratch.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At btrfs_is_empty_uuid() we have our custom code to check if an uuid is
empty, however there a kernel uuid library that has a function named
uuid_is_null() which does the same and probably more efficient.
So change btrfs_is_empty_uuid() to use uuid_is_null(), which is almost
a directly replacement, it just wraps the necessary casting since our
uuid types are u8 arrays while the uuid kernel library uses the uuid_t
type, which is just a typedef of an u8 array of 16 elements as well.
Also since the function is now to trivial, make it a static inline
function in fs.h.
Suggested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's pointless to have a comment above the prototype declarations of
btrfs_ctree_init() and btrfs_ctree_exit() mentioning that they are
declared in ctree.c. This is from the old days when ctree.h was used
to place anything that didn't fit in any other file. So remove it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have 3 functions that have their prototypes declared in ctree.h but
they are defined at extent-tree.c and they are unrelated to the btree
data structure. Move the prototypes out of ctree.h and into extent-tree.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently btrfs_alloc_write_mask() is defined in ctree.h but it's not
related at all to the btree data structure, so move it into fs.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently BTRFS_BYTES_TO_BLKS() is defined in ctree.h but it's not related
at all to the btree data structure, so move it into fs.h.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The folio ordered helper macros are defined at ctree.h but this is not
the best place since ctree.{h,c} is all about the btree data structure
implementation and not a generic module. So move these macros into the
fs.h header.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
It's a generic helper not specific to ioctls and used in several places,
so move it out from ioctl.c and into fs.c. While at it change its return
type from int to bool and declare the loop variable in the loop itself.
This also slightly reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781492 161037 16920 1959449 1de619 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781340 161037 16920 1959297 1de581 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The declarations for the exclusive operation functions are located at fs.h
but their definitions are in ioctl.c, which doesn't make much sense since
(most of them) are used in several files other than ioctl.c. Since they
are used in several files and they are generic enough, move them out of
ioctl.c and into fs.c, even the ones that are currently only used at
ioctl.c, for the sake of having them all in the same C file.
This also reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782094 161045 16920 1960059 1de87b fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1781492 161037 16920 1959449 1de619 fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The ctree module is about the implementation of the btree data structure
and not a place holder for generic filesystem things like the csum
algorithm details. Move the functions related to the csum algorithm
details away from ctree.c and into fs.c, which is a far better place for
them. Also fix missing punctuation in comments and change one multiline
comment to a single line comment since everything fits in under 80
characters.
For some reason this also slightly reduces the module's size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782126 161045 16920 1960091 1de89b fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782094 161045 16920 1960059 1de87b fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function abort_should_print_stack() is declared in transaction.h but
its definition is in ctree.c, which doesn't make sense since ctree.c is
the btree implementation and the function is related to the transaction
code. Move its definition into transaction.h as an inline function since
it's a very short and trivial function, and also add the 'btrfs_' prefix
into its name.
This change also reduces the module size.
Before this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1783148 161137 16920 1961205 1decf5 fs/btrfs/btrfs.ko
After this change:
$ size fs/btrfs/btrfs.ko
text data bss dec hex filename
1782126 161045 16920 1960091 1de89b fs/btrfs/btrfs.ko
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have the stripe tree decision saved in struct
btrfs_io_geometry we can pass it into is_single_device_io() and get rid of
another call to btrfs_need_raid_stripe_tree_update().
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Cache the decision if a particular I/O needs to update RAID stripe tree
entries in struct btrfs_io_context.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Cache the return of btrfs_need_stripe_tree_update() in struct
btrfs_io_geometry starting from btrfs_map_block().
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We should always call check_delayed_ref() with a path having a locked leaf
from the extent tree where either the extent item is located or where it
should be located in case it doesn't exist yet (when there's a pending
unflushed delayed ref to do it), as we need to lock any existing delayed
ref head while holding such leaf locked in order to avoid races with
flushing delayed references, which could make us think an extent is not
shared when it really is.
So add some assertions and a comment about such expectations to
btrfs_cross_ref_exist(), which is the only caller of check_delayed_ref().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are some not immediately obvious details about the operation of
check_committed_ref(), namely that when it returns 0 it must return with
the path having a locked leaf from the extent tree that contains the
extent's extent item, so that we can later check for delayed refs when
calling check_delayed_ref() in a way that doesn't race with a task running
delayed references. For similar reasons, it must also return with a locked
leaf when the extent item is not found, and that leaf is where the extent
item should be located, because we may have delayed references that are
going to create the extent item. Also document that the function can
return false positives in order to not be too slow, and that the most
important is to not return false negatives.
So add a function comment to check_committed_ref().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of passing a root and an objectid which matches an inode number,
pass the inode instead, since the root is always the root associated to
the inode and the objectid is the number of that inode.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of setting the value to return in a local variable 'ret' and then
jumping into a label named 'out' that does nothing but return that value,
simplify everything by getting rid of the label and directly returning a
value.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At check_committed_ref() we are calling btrfs_get_extent_inline_ref_type()
twice, once before we check if have an inline extent owner ref (for simple
qgroups) and then once again sometime after that check. This second call
is redundant when we have simple quotas disabled or we found an inline ref
that is not of the owner ref type. So avoid this second call unless we
have simple quotas enabled and found an owner ref, saving a function call
that does inline ref validation again.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
At check_committed_ref() we have this check to see if the data extent was
created in a generation lower than or equals to the generation where the
last snapshot for the root was created, and if so we return immediately
with 1, since it's very likely the extent is shared, referenced by other
root.
The only call chain for check_committed_ref() is the following:
can_nocow_file_extent()
btrfs_cross_ref_exist()
check_committed_ref()
And we already do that snapshot check at can_nocow_file_extent(), before
we call btrfs_cross_ref_exist(). This makes the check done at
check_committed_ref() redundant, so remove it.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All callers of can_nocow_extent() now pass a value of false for its
'strict' argument, making it redundant. So remove the argument from
can_nocow_extent() as well as can_nocow_file_extent(),
btrfs_cross_ref_exist() and check_committed_ref(), because this
argument was used just to influence the behavior of check_committed_ref().
Also remove the 'strict' field from struct can_nocow_file_extent_args,
which is now always false as well, as its value is taken from the
argument to can_nocow_extent().
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove the variable length in btrfs_insert_one_raid_extent() as it is
unused.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There is a recent ML report that mounting a large fs backed by hardware
RAID56 controller (with one device missing) took too much time, and
systemd seems to kill the mount attempt.
In that case, the only error message is:
BTRFS error (device sdj): open_ctree failed
There is no reason on why the failure happened, making it very hard to
understand the reason.
At least output the error number (in the particular case it should be
-EINTR) to provide some clue.
Link: https://lore.kernel.org/linux-btrfs/9b9c4d2810abcca2f9f76e32220ed9a90febb235.camel@scientia.org/
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Cc: stable@vger.kernel.org
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_copy_from_user() handles the folio dirtying for
buffered write. The original design is to allow that function to handle
multiple folios, but since commit c87c299776e4 ("btrfs: make buffered
write to copy one page a time") there is no need to support multiple
folios.
So here open-code btrfs_copy_from_user() to
copy_folio_from_iter_atomic() and flush_dcache_folio() calls.
The short-copy check and revert are still kept as-is.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[WARNING]
There are several warnings about the recently introduced qgroup
auto-removal that it triggers WARN_ON() for the non-zero rfer/excl
numbers, e.g:
------------[ cut here ]------------
WARNING: CPU: 67 PID: 2882 at fs/btrfs/qgroup.c:1854 btrfs_remove_qgroup+0x3df/0x450
CPU: 67 UID: 0 PID: 2882 Comm: btrfs-cleaner Kdump: loaded Not tainted 6.11.6-300.fc41.x86_64 #1
RIP: 0010:btrfs_remove_qgroup+0x3df/0x450
Call Trace:
<TASK>
btrfs_qgroup_cleanup_dropped_subvolume+0x97/0xc0
btrfs_drop_snapshot+0x44e/0xa80
btrfs_clean_one_deleted_snapshot+0xc3/0x110
cleaner_kthread+0xd8/0x130
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device sda): to be deleted qgroup 0/319 has non-zero numbers, rfer 258478080 rfer_cmpr 258478080 excl 0 excl_cmpr 0
[CAUSE]
Although the root cause is still unclear, as if qgroup is consistent a
fully dropped subvolume (with extra transaction committed) should lead
to all zero numbers for the qgroup.
My current guess is the subvolume drop triggered the new subtree drop
threshold thus marked qgroup inconsistent, then rescan cleared it but
some corner case is not properly handled during subvolume dropping.
But at least for this particular case, since it's only the rfer/excl not
properly reset to 0, and qgroup is already marked inconsistent, there is
nothing to be worried for the end users.
The user space tool utilizing qgroup would queue a rescan to handle
everything, so the kernel wanring is a little overkilled.
[ENHANCEMENT]
Enhance the warning inside btrfs_remove_qgroup() by:
- Only do WARN() if CONFIG_BTRFS_DEBUG is enabled
As explained the kernel can handle inconsistent qgroups by simply do a
rescan, there is nothing to bother the end users.
- Treat the reserved space leak the same as non-zero numbers
By outputting the values and trigger a WARN() if it's a debug build.
So far I haven't experienced any case related to reserved space so I
hope we will never need to bother them.
Fixes: 839d6ea4f86d ("btrfs: automatically remove the subvolume qgroup")
Link: https://github.com/kdave/btrfs-progs/issues/922
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We don't ever look at this list, remove it.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Before we were keeping all of our nodes on various lists in order to
make sure everything got cleaned up correctly. We used node->lowest to
indicate that node->lower was linked into the cache->leaves list. Now
that we do cleanup based on the rb-tree both the list and the flag are
useless, so delete them both.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We rely on finding all our nodes on the various lists in the backref
cache, when they are all also in the rbtree. Instead just search
through the rbtree and free everything.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we handle relocation for non-shareable roots without using the
backref cache, remove the ->cowonly field from the backref nodes and
update the handling to throw an error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We already determine the owner for any blocks we find when we're
relocating, and for COW-only blocks (and the data reloc tree) we COW
down to the block and call it good enough. However we still build a
whole backref tree for them, even though we're not going to use it, and
then just don't put these blocks in the cache.
Rework the code to check if the block belongs to a COW-only root or the
data reloc root, and then just cow down to the block, skipping the
backref cache generation.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we no longer maintain backref cache across transactions, and this
is only called when we're creating the reloc root for a newly created
snapshot in the transaction critical section, we will end up doing a
bunch of work that will just get thrown away when we start the
transaction in the relocation loop. Delete this code as it no longer
does anything for us.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have this setup as a loop, but in reality we will never walk back up
the backref tree, if we do then it's a bug. Get rid of the loop and
handle the case where we have node->new_bytenr set at all. Previous
check was only if node->new_bytenr != root->node->start, but if it did
then we would hit the WARN_ON() and walk back up the tree.
Instead we want to just return error if ->new_bytenr is set, and then do
the normal updating of the node for the reloc root and carry on.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a comment for this field so we know what it is used for. Previously
we used it to update the backref cache, so people may mistakenly think
it is useless, but in fact exists to make sure the backref cache makes
sense.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we're not updating the backref cache when we switch transids we
can remove the changed list.
We're going to keep the new_bytenr field because it serves as a good
sanity check for the backref cache and relocation, and can prevent us
from making extent tree corruption worse.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This BUG_ON is meant to catch backref cache problems, but these can
arise from either bugs in the backref cache or corruption in the extent
tree. Fix it to be a proper error.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A data race occurs when the function `insert_ordered_extent_file_extent()`
and the function `btrfs_inode_safe_disk_i_size_write()` are executed
concurrently. The function `insert_ordered_extent_file_extent()` is not
locked when reading inode->disk_i_size, causing
`btrfs_inode_safe_disk_i_size_write()` to cause data competition when
writing inode->disk_i_size, thus affecting the value of `modify_tree`.
The specific call stack that appears during testing is as follows:
============DATA_RACE============
btrfs_drop_extents+0x89a/0xa060 [btrfs]
insert_reserved_file_extent+0xb54/0x2960 [btrfs]
insert_ordered_extent_file_extent+0xff5/0x1760 [btrfs]
btrfs_finish_one_ordered+0x1b85/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
============OTHER_INFO============
btrfs_inode_safe_disk_i_size_write+0x4ec/0x600 [btrfs]
btrfs_finish_one_ordered+0x24c7/0x36a0 [btrfs]
btrfs_finish_ordered_io+0x37/0x60 [btrfs]
finish_ordered_fn+0x3e/0x50 [btrfs]
btrfs_work_helper+0x9c9/0x27a0 [btrfs]
process_scheduled_works+0x716/0xf10
worker_thread+0xb6a/0x1190
kthread+0x292/0x330
ret_from_fork+0x4d/0x80
ret_from_fork_asm+0x1a/0x30
=================================
The main purpose of the check of the inode's disk_i_size is to avoid
taking write locks on a btree path when we have a write at or beyond
EOF, since in these cases we don't expect to find extent items in the
root to drop. However if we end up taking write locks due to a data
race on disk_i_size, everything is still correct, we only add extra
lock contention on the tree in case there's concurrency from other tasks.
If the race causes us to not take write locks when we actually need them,
then everything is functionally correct as well, since if we find out we
have extent items to drop and we took read locks (modify_tree set to 0),
we release the path and retry again with write locks.
Since this data race does not affect the correctness of the function,
it is a harmless data race, use data_race() to check inode->disk_i_size.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Hao-ran Zheng <zhenghaoran154@gmail.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_drop_extents() calls BUG_ON() in case the counter of to be deleted
extents is greater than 0. But all of these code paths can handle errors,
so there's no need to crash the kernel. Instead WARN() that the condition
has been met and gracefully bail out.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On the zoned mode, once used and freed region is still not reusable after the
freeing. The underlying zone needs to be reset before reusing. Btrfs resets a
zone when it removes a block group, and then new block group is allocated on
the zones to reuse the zones. But, it is sometime too late to catch up with a
write side.
This commit introduces a new space-info reclaim method ZONE_RESET. That will
pick a block group from the unused list and reset its zone to reuse the
zone_unusable space. It is faster than removing the block group and re-creating
a new block group on the same zones.
For the first implementation, the ZONE_RESET is only applied to a block group
whose region is fully zone_unusable. Reclaiming partial zone_unusable block
group could be implemented later.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since commit e1e577aafe41 ("btrfs: store fs_info in space_info"), we have
the fs_info in a space_info. So, we can drop fs_info argument from
btrfs_update_space_info_*. There is no behavior change.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Factor out a part of unpin_extent_range() that returns space back to the
space info, prioritizing global block reserve. Also, move the "len"
variable into the loop to clarify we don't need to carry it beyond an
iteration.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 146054090b08 ("btrfs: initial fsverity support") introduced
fs-verity support for btrfs, but didn't add support for
FS_IOC_READ_VERITY_METADATA to directly query the Merkle tree,
descriptor and signature blocks for fs-verity enabled files.
Add the (trival) implementation: we just need to wire it through to the
fs-verity code, the same way as is done in the other two filesystems
which support this ioctl (ext4, f2fs). The fs-verity code already has
access to the required data.
This is also safe to backport to older stable trees (5.15+) if needed.
Signed-off-by: Allison Karlitskaya <allison.karlitskaya@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The variable ret is being initialized to zero and also later re-assigned
to zero. In both cases the assignment is redundant since the value is
never read after the assignment and hence they can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_get_extent() will only return an PTR_ERR() or a valid
extent map pointer. It will not return NULL.
Thus the usage of PTR_ERR_OR_ZERO() inside submit_one_sector() is not
needed, use plain PTR_ERR() instead, and that is the only usage of
PTR_ERR_OR_ZERO() after btrfs_get_extent().
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The recent fix for a stupid mistake I made uncovered the fact that we
don't have adequate testing in the delayed refs code, as it took a
pretty extensive and long running stress test to uncover something that
a unit test would have uncovered right away.
Fix this by adding a delayed refs self test suite. This will validate
that the btrfs_ref transformation does the correct thing, that we do the
correct thing when merging delayed refs, and that we get the delayed
refs in the order that we expect. These are all crucial to how the
delayed refs operate.
I introduced various bugs (including the original bug) into the delayed
refs code to validate that these tests caught all of the shenanigans
that I could think of.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This helper is how we select the delayed ref to run once we've selected
the delayed ref head. I need this exported to add a unit test for
delayed refs, and it's more natural home is in delayed-ref.c. Rename it
to btrfs_select_delayed_ref and move it into delayed-ref.c.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
|
Roger L. Beckermeyer III
Wolfram Sang
Qu Wenruo
Filipe Manana
Johannes Thumshirn
Josef Bacik
Hao-ran Zheng
Naohiro Aota
Allison Karlitskaya
Colin Ian King
Linus Torvalds