aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-04net: phy: mscc: factorize code for LEDs modeQuentin Schulz1-36/+39
LEDs modes are set the same way, except they are offset by 4 times the index of the LED. Let's factorize all the code so that it's easier to add support for the 4 LEDs of the VSC8584 PHY. Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/wan/fsl_ucc_hdlc: tx timeout handlerDavid Gounaris1-0/+7
Added tx timeout handler. This helps when troubleshooting. Signed-off-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/wan/fsl_ucc_hdlc: GUMR for non tsa modeDavid Gounaris1-0/+6
The following bits in the GUMR is changed for non tsa mode: CDS, CTSP and CTSS are set to zero. When set, there is no tx interrupts from the controller. Signed-off-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/wan/fsl_ucc_hdlc: hmaskDavid Gounaris3-1/+11
Ability to set hmask in the device-tree, which can be used to change address filtering of packets. Signed-off-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/wan/fsl_ucc_hdlc: Adding ARPHRD_ETHERDavid Gounaris1-0/+5
This patch is to avoid discarding ethernet packets when using HDLC_ETH protocol. Signed-off-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/wan/fsl_ucc_hdlc: allow PARITY_CRC16_PR0_CCITT parityDavid Gounaris1-0/+1
Signed-off-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/wan/fsl_ucc_hdlc: allow ucc index up to 7David Gounaris1-1/+1
There is a need to allow higher indexes to be able to support MPC83xx platforms. (UCC1-UCC8) Signed-off-by: David Gounaris <david.gounaris@infinera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03cxgb4: collect hardware queue descriptorsRahul Lakkireddy6-1/+399
Collect descriptors of all ULD and LLD hardware queues managed by LLD. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03cxgb4: when max_tx_rate is 0 disable tx rate limitingGanesh Goudar1-2/+23
in ndo_set_vf_rate() when max_tx_rate is 0 disable tx rate limiting for that vf. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Refine hns3_get_link_ksettings()Jian Shen1-28/+40
In the previous implement, the query operation for fibre port and copper port are mixed. This patch refines it by seperating them based on the port type. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Remove redundant codes of query advertised flow control abilitiyJian Shen2-27/+0
If the advertised flow control ability has been fetched using phy_ethtool_ksettings_get() or hclge_get_link_mode() then it is unnecessary to fetch them again later using hclge_get_flowctrl_adv(). This patch removes it. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Change the dst mac addr of loopback packetYunsheng Lin1-0/+1
Currently, the dst mac addr of loopback packet is the same as the host' mac addr, the SSU component may loop back the packet to host before the packet reaches mac or serdes, which will defect the purpose of mac or serdes selftest. This patch changes it by adding 0x1f to the last byte of dst mac addr. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Only update mac configuation when necessaryYunsheng Lin1-17/+31
Currently only fiber port checks if it is necessay to set the mac through firmware when link is changed, this patch unify the checking to allow the copper port do the checking too. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Preserve vlan 0 in hardware tableYunsheng Lin1-0/+3
When netdev is down, the stack will delete the vlan from hardware including vlan0, which will cause problem when doing loopback selftest when netdev is down. This patch fixes it by always preserving vlan 0 in hardware, because vlan 0 is defalut vlan, which should always be in hardware. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix ping exited problem when doing lp selftestYunsheng Lin1-2/+2
When ping is runnig and user executes the loopback selftest, the ping cmd will stop and exit. This patch fixes it by using the hns3_nic_net_open/stop to offline the netdev when doing loopback selftest. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix for loopback selftest failed problemYunsheng Lin2-37/+31
Tqp and mac need to be enabled when doing loopback selftest, ae_algo->ops->start/stop is used to do the job, there is a time window between ae_algo->ops->start/stop and loopback setup, which will cause selftest failed problem when there is frame coming in during that time window. This patch fixes it by enabling the tqp and mac during loopback setup process. Fixes: c39c4d98dc65 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Implement shutdown ops in hns3 pci driverYunsheng Lin1-0/+13
This patch implements shutdown ops in hns3 pci driver, which unloads the hns3 driver and set the power state to D3hot. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix error of checking used vlan idJian Shen1-1/+1
PF uses hdev->vlan_table to manage the port vlan table. In function hclge_set_vlan_filter_hw(), it checks whether a vlan id has been used, by foreach all the vport bits. It should use macro HCLGE_VPORT_NUM, not VLAN_N_VID as the foreach condition. Fixes: 6c251711b37f ("net: hns3: Disable vf vlan filter when vf vlan table is full") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix for multicast failureHuazhong Tan1-2/+2
When the lower 24 bits of the IPV6 link-local addresses at both ends are the same, the multicast MAC address for Neigbour Discovery is the same. The multicast for Neigbour Discovery will fail. This patch fixes it by including the bonding uplink port in the multicast group. Fixes: 46a3df9f9718("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net: hns3: Fix for vf vlan delete failed problemYunsheng Lin1-0/+8
There are only 128 entries in vf vlan table, if user has added more than 128 vlan, fw will ignore it and disable the vf vlan table. So when user deletes the vlan entry that has not been set to vf vlan table, fw will return not found result and driver treat that as error, which will cause vlan delete failed problem. This patch fixes it by returning ok when fw returns not found result. Fixes: 6c251711b37f ("net: hns3: Disable vf vlan filter when vf vlan table is full") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03tipc: correct structure parameter comments for topsrvZhenbo Gao1-8/+2
Remove the following obsolete parameter comments of tipc_topsrv struct: @rcvbuf_cache @tipc_conn_new @tipc_conn_release @tipc_conn_recvmsg @imp @type Add the comments for the missing parameters below of tipc_topsrv struct: @awork @listener Remove the unused or duplicated parameter comments of tipc_conn struct: @outqueue_lock @rx_action Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03liquidio: Added delayed work for periodically updating the link statistics.Pradeep Nalla6-10/+40
Signed-off-by: Pradeep Nalla <pradeep.nalla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/mlx5e: IPoIB, Use priv stats in completion rx flowFeras Daoud1-1/+2
Since the RQs are shared between all pkey interfaces, the stats should be taken from where the per-ring stats are stored instead of the parent RQ. Fixes: 4c6c615e3f30 ("net/mlx5e: IPoIB, Add PKEY child interface nic profile") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/mlx5e: IPoIB, Add ndo stats support for IPoIB child devicesFeras Daoud1-0/+1
Expose RX and TX counters by implementing ndo_get_stats64 operation for child devices. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/mlx5e: IPoIB, Add ndo stats support for IPoIB netdevicesFeras Daoud2-0/+43
Expose RX and TX counters by implementing ndo_get_stats64 operation for both parent devices. After this change, all the relevant statistics can be retrieved using ifconfig. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/mlx5e: IPoIB, Initialize max_opened_tc in mlx5i_init flowFeras Daoud1-0/+1
Enhanced ipoib does not initialize max_opened_tc causing wrong ethtool statistics. As mlx5e_grp_sw_update_stats relies on this variable, without this change, the TX statistics will not be updated. Fixes: 05909babce53 ("net/mlx5e: Avoid reset netdev stats on configuration changes") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: dsa: mv88e6xxx: Add SERDES phydev_link_change for 6352Andrew Lunn3-0/+127
The 6352 family has one SERDES interface, which can be used by either port 4 or port 5. Add interrupt support for the SERDES interface, and report when the link status changes. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: dsa: mv88e6xxx: Fix writing to a PHY page.Andrew Lunn1-0/+3
After changing to the needed page, actually write the value to the register! Fixes: 09cb7dfd3f14 ("net: dsa: mv88e6xxx: describe PHY page and SerDes") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02tcp: remove useless add operation when init sysctl_max_tw_bucketsYafang Shao1-1/+1
cp_hashinfo.ehash_mask is always an odd number, which is set in function alloc_large_system_hash(). See bellow, if (_hash_mask) *_hash_mask = (1 << log2qty) - 1; <<< always odd number Hence the local variable 'cnt' is a even number, as a result of that it is no difference to do the incrementation here. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: nixge: Fix Kconfig warning with OF_MDIOMoritz Fischer1-1/+1
Fix Kconfig warning with OF_MDIO where OF_MDIO was selected unconditionally instead of only when OF is actually enabled. Fixes 7e8d5755be0e ("net: nixge: Add support for 64-bit platforms") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: mvneta: reduce smp_processor_id() calling in mvneta_tx_done_gbeJisheng Zhang1-1/+2
In the loop of mvneta_tx_done_gbe(), we call the smp_processor_id() each time, move the call out of the loop to optimize the code a bit. Before the patch, the loop looks like(under arm64): ldr x1, [x29,#120] ... ldr w24, [x1,#36] ... bl 0 <_raw_spin_lock> str w24, [x27,#132] ... After the patch, the loop looks like(under arm64): ... bl 0 <_raw_spin_lock> str w23, [x28,#132] ... where w23 is loaded so be ready before the loop. >From another side, mvneta_tx_done_gbe() is called from mvneta_poll() which is in non-preemptible context, so it's safe to call the smp_processor_id() function once. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: mvneta: enable NETIF_F_RXCSUM by defaultJisheng Zhang1-1/+2
The code and HW supports NETIF_F_RXCSUM, so let's enable it by default. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net: mvneta: Don't check NETIF_F_GRO ourselfJisheng Zhang1-4/+1
napi_gro_receive() checks NETIF_F_GRO bit as well, if the bit is not set, we will go through GRO_NORMAL in napi_skb_finish(), so fall back to netif_receive_skb_internal(), so we don't need to check NETIF_F_GRO ourself. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-02net/sched: fix type of htb statisticsFlorent Fourcot1-3/+3
tokens and ctokens are defined as s64 in htb_class structure, and clamped to 32bits value during netlink dumps: cl->xstats.tokens = clamp_t(s64, PSCHED_NS2TICKS(cl->tokens), INT_MIN, INT_MAX); Defining it as u32 is working since userspace (tc) is printing it as signed int, but a correct definition from the beginning is probably better. In the same time, 'giants' structure member is unused since years, so update the comment to mark it unused. Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: bgmac: remove set but not used variable 'err'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bgmac.c: In function 'bgmac_dma_alloc': drivers/net/ethernet/broadcom/bgmac.c:619:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: dsa: b53: Provide sensible defaultsFlorian Fainelli1-0/+2
The SRAB driver is the default way to communicate with the integrated switch on iProc platforms and the MMAP driver is the way to communicate with the integrated switch on DSL BCM63xx and CM BCM33xx. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01liquidio: remove set but not used variable 'irh'YueHaibing1-9/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/request_manager.c: In function 'lio_process_iq_request_list': drivers/net/ethernet/cavium/liquidio/request_manager.c:383:27: warning: variable 'irh' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01qed: Lower the severity of a dcbx log message.Sudarsana Reddy Kalluru1-2/+3
Driver displays an error message for each unrecognized dcbx TLV that's received from the peer or configured on the device. It is observed that syslog will be flooded with such messages in certain scenarios e.g., frequent link-flaps/lldp-transactions. Changing the severity of this message to verbose level as it's not an error scenario/message. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01rds: store socket timestamps as ktime_tArnd Bergmann2-9/+7
rds is the last in-kernel user of the old do_gettimeofday() function. Convert it over to ktime_get_real() to make it work more like the generic socket timestamps, and to let us kill off do_gettimeofday(). A follow-up patch will have to change the user space interface to deal better with 32-bit tasks, which may use an incompatible layout for 'struct timespec'. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01selftests/tls: Add test for recv(PEEK) spanning across multiple recordsVakul Garg1-0/+22
Added test case to receive multiple records with a single recvmsg() operation with a MSG_PEEK set. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net/tls: Add support for async decryption of tls recordsVakul Garg2-13/+127
When tls records are decrypted using asynchronous acclerators such as NXP CAAM engine, the crypto apis return -EINPROGRESS. Presently, on getting -EINPROGRESS, the tls record processing stops till the time the crypto accelerator finishes off and returns the result. This incurs a context switch and is not an efficient way of accessing the crypto accelerators. Crypto accelerators work efficient when they are queued with multiple crypto jobs without having to wait for the previous ones to complete. The patch submits multiple crypto requests without having to wait for for previous ones to complete. This has been implemented for records which are decrypted in zero-copy mode. At the end of recvmsg(), we wait for all the asynchronous decryption requests to complete. The references to records which have been sent for async decryption are dropped. For cases where record decryption is not possible in zero-copy mode, asynchronous decryption is not used and we wait for decryption crypto api to complete. For crypto requests executing in async fashion, the memory for aead_request, sglists and skb etc is freed from the decryption completion handler. The decryption completion handler wakesup the sleeping user context when recvmsg() flags that it has done sending all the decryption requests and there are no more decryption requests pending to be completed. Signed-off-by: Vakul Garg <vakul.garg@nxp.com> Reviewed-by: Dave Watson <davejwatson@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01bnxt_en: remove set but not used variable 'rx_stats'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c: In function 'bnxt_vf_rep_rx': drivers/net/ethernet/broadcom/bnxt/bnxt_vfr.c:212:28: warning: variable 'rx_stats' set but not used [-Wunused-but-set-variable] struct bnxt_vf_rep_stats *rx_stats; Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: remove duplicated include from net_failover.cYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01net: stmmac: Add CBS support in XGMAC2Jose Abreu4-2/+50
XGMAC2 uses the same CBS mechanism as GMAC5, only registers offset changes. Lets use the same TC callbacks and implement the .config_cbs callback in XGMAC2 core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01dpaa2-eth: Move DPAA2 Ethernet driver from staging to drivers/netIoana Radulescu17-29/+13
The DPAA2 Ethernet driver supports Freescale/NXP SoCs with DPAA2 (DataPath Acceleration Architecture v2). The driver manages network objects discovered on the fsl-mc bus. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-01staging: fsl-dpaa2/eth: Delay netdev_register() callIoana Radulescu1-39/+32
Only call netdev_register() at the end of the probe function, once all other necessary bits and pieces are properly initialized. We keep the rest of the netdevice initialization code in place, at the earlier point of the probing sequence, including the settings previously done in ndo_init. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31bridge: Switch to bitmap_zalloc()Andy Shevchenko2-6/+4
Switch to bitmap_zalloc() to show clearly what we are allocating. Besides that it returns pointer of bitmap type instead of opaque void *. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31net: dsa: mv88e6xxx: Share main switch IRQMarek Behún1-1/+1
On some boards the interrupt can be shared between multiple devices. For example on Turris Mox the interrupt is shared between all switches. Signed-off-by: Marek Behun <marek.behun@nic.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31net/ipv6: Do not reset nl_net in ip6_route_info_createDavid Ahern1-2/+0
nl_net is set on entry to ip6_route_info_create. Only devices within that namespace are considered so no need to reset it before returning. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31net/ipv4: Add extack message that dev is required for ONLINKDavid Ahern1-1/+3
Make IPv4 consistent with IPv6 and return an extack message that the ONLINK flag requires a nexthop device. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.