| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The EXT4_IOC_GET_ES_CACHE and EXT4_IOC_PRECACHE_EXTENTS currently
invokes ext4_ext_precache() to preload the extent cache without holding
the inode's i_rwsem. This can result in stale extent cache entries when
competing with operations such as ext4_collapse_range() which calls
ext4_ext_remove_space() or ext4_ext_shift_extents().
The problem arises when ext4_ext_remove_space() temporarily releases
i_data_sem due to insufficient journal credits. During this interval, a
concurrent EXT4_IOC_GET_ES_CACHE or EXT4_IOC_PRECACHE_EXTENTS may cache
extent entries that are about to be deleted. As a result, these cached
entries become stale and inconsistent with the actual extents.
Loading the extents cache without holding the inode's i_rwsem or the
mapping's invalidate_lock is not permitted besides during the writeback.
Fix this by holding the i_rwsem during EXT4_IOC_GET_ES_CACHE and
EXT4_IOC_PRECACHE_EXTENTS.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250423085257.122685-6-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The ext4_fiemap() currently invokes ext4_ext_precache() and
iomap_fiemap() to preload the extent cache and query mapping information
without holding the inode's i_rwsem. This can result in stale extent
cache entries when competing with operations such as
ext4_collapse_range() which calls ext4_ext_remove_space() or
ext4_ext_shift_extents().
The problem arises when ext4_ext_remove_space() temporarily releases
i_data_sem due to insufficient journal credits. During this interval, a
concurrent ext4_fiemap() may cache extent entries that are about to be
deleted. As a result, these cached entries become stale and inconsistent
with the actual extents.
Loading the extents cache without holding the inode's i_rwsem or the
mapping's invalidate_lock is not permitted besides during the writeback.
Fix this by holding the i_rwsem in ext4_fiemap().
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250423085257.122685-5-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, in the I/O writeback path, ext4_map_blocks() may attempt to
cache additional unrelated extents in the extent status tree without
holding the inode's i_rwsem and the mapping's invalidate_lock. This can
lead to stale extent status entries remaining in certain scenarios,
potentially causing data corruption.
For example, when performing a collapse range in ext4_collapse_range(),
it clears the extent cache and dirty pages before removing blocks and
shifting extents. It also holds the i_data_sem during these two
operations. However, both ext4_ext_remove_space() and
ext4_ext_shift_extents() may briefly release the i_data_sem if journal
credits are insufficient (ext4_datasem_ensure_credits()). If another
writeback process writes dirty pages from other regions during this
interval, it may cache extents that are about to be modified. Unless
ext4_collapse_range() explicitly clears the extent cache again, these
cached entries can become stale and inconsistent with the actual
extents.
0 a n b c m
| | | | | |
[www][wwwwww][wwwwwwww]...[wwwww][wwww]...
| |
N M
Assume that block a is dirty. The collapse range operation is removing
data from n to m and drops i_data_sem immediately after removing the
extent from b to c. At the same time, a concurrent writeback begins to
write back block a; it will reloads the extent from [n, b) into the
extent status tree since it does not hold the i_rwsem or the
invalidate_lock. After the collapse range operation, it left the stale
extent [n, b), which points logical block n to N, but the actual
physical block of n should be M.
Similarly, both ext4_insert_range() and ext4_truncate() have the same
problem. ext4_punch_hole() survived since it re-add a hole extent entry
after removing space since commit 9f1118223aa0 ("ext4: add a hole extent
entry in cache after punch").
In most cases, during dirty page writeback, the block mapping
information is likely to be found in the extent cache, making it less
necessary to search for physical extents. Consequently, loading
unrelated extent caches during writeback appears to be ineffective.
Therefore, fix this by adds EXT4_EX_NOCACHE in the writeback path to
prevent caching of unrelated extents, eliminating this potential source
of corruption.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250423085257.122685-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Currently, the EXT4_GET_BLOCKS_IO_SUBMIT flag is only used during data
writeback to indicate that in ordered mode, the journal commit thread
should skip re-submitting data and simply wait for I/O completion.
To prepare for later patches that need to detect I/O submission context
in ext4_map_blocks(), generalizes the meaning of
EXT4_GET_BLOCKS_IO_SUBMIT. This flag will be set during:
1) data I/O writeback,
2) I/O completion extents conversion,
3) journal performing commit in fast_commit.
This change doesn't affect current usage of this flag and provides a
clear way to identify I/O submission context.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250423085257.122685-3-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When removing space, we should use EXT4_EX_NOCACHE because we don't
need to cache extents, and we should also use EXT4_EX_NOFAIL to prevent
metadata inconsistencies that may arise from memory allocation failures.
While ext4_ext_remove_space() already uses these two flags in most
places, they are missing in ext4_ext_search_right() and
read_extent_tree_block() calls. Unify the flags to ensure consistent
behavior throughout the extent removal process.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250423085257.122685-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
When running the following code on an ext4 filesystem with inline_data
feature enabled, it will lead to the bug below.
fd = open("file1", O_RDWR | O_CREAT | O_TRUNC, 0666);
ftruncate(fd, 30);
pwrite(fd, "a", 1, (1UL << 40) + 5UL);
That happens because write_begin will succeed as when
ext4_generic_write_inline_data calls ext4_prepare_inline_data, pos + len
will be truncated, leading to ext4_prepare_inline_data parameter to be 6
instead of 0x10000000006.
Then, later when write_end is called, we hit:
BUG_ON(pos + len > EXT4_I(inode)->i_inline_size);
at ext4_write_inline_data.
Fix it by using a loff_t type for the len parameter in
ext4_prepare_inline_data instead of an unsigned int.
[ 44.545164] ------------[ cut here ]------------
[ 44.545530] kernel BUG at fs/ext4/inline.c:240!
[ 44.545834] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 44.546172] CPU: 3 UID: 0 PID: 343 Comm: test Not tainted 6.15.0-rc2-00003-g9080916f4863 #45 PREEMPT(full) 112853fcebfdb93254270a7959841d2c6aa2c8bb
[ 44.546523] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 44.546523] RIP: 0010:ext4_write_inline_data+0xfe/0x100
[ 44.546523] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49
[ 44.546523] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216
[ 44.546523] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006
[ 44.546523] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738
[ 44.546523] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[ 44.546523] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000
[ 44.546523] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738
[ 44.546523] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000
[ 44.546523] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 44.546523] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0
[ 44.546523] PKRU: 55555554
[ 44.546523] Call Trace:
[ 44.546523] <TASK>
[ 44.546523] ext4_write_inline_data_end+0x126/0x2d0
[ 44.546523] generic_perform_write+0x17e/0x270
[ 44.546523] ext4_buffered_write_iter+0xc8/0x170
[ 44.546523] vfs_write+0x2be/0x3e0
[ 44.546523] __x64_sys_pwrite64+0x6d/0xc0
[ 44.546523] do_syscall_64+0x6a/0xf0
[ 44.546523] ? __wake_up+0x89/0xb0
[ 44.546523] ? xas_find+0x72/0x1c0
[ 44.546523] ? next_uptodate_folio+0x317/0x330
[ 44.546523] ? set_pte_range+0x1a6/0x270
[ 44.546523] ? filemap_map_pages+0x6ee/0x840
[ 44.546523] ? ext4_setattr+0x2fa/0x750
[ 44.546523] ? do_pte_missing+0x128/0xf70
[ 44.546523] ? security_inode_post_setattr+0x3e/0xd0
[ 44.546523] ? ___pte_offset_map+0x19/0x100
[ 44.546523] ? handle_mm_fault+0x721/0xa10
[ 44.546523] ? do_user_addr_fault+0x197/0x730
[ 44.546523] ? do_syscall_64+0x76/0xf0
[ 44.546523] ? arch_exit_to_user_mode_prepare+0x1e/0x60
[ 44.546523] ? irqentry_exit_to_user_mode+0x79/0x90
[ 44.546523] entry_SYSCALL_64_after_hwframe+0x55/0x5d
[ 44.546523] RIP: 0033:0x7f42999c6687
[ 44.546523] Code: 48 89 fa 4c 89 df e8 58 b3 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
[ 44.546523] RSP: 002b:00007ffeae4a7930 EFLAGS: 00000202 ORIG_RAX: 0000000000000012
[ 44.546523] RAX: ffffffffffffffda RBX: 00007f4299934740 RCX: 00007f42999c6687
[ 44.546523] RDX: 0000000000000001 RSI: 000055ea6149200f RDI: 0000000000000003
[ 44.546523] RBP: 00007ffeae4a79a0 R08: 0000000000000000 R09: 0000000000000000
[ 44.546523] R10: 0000010000000005 R11: 0000000000000202 R12: 0000000000000000
[ 44.546523] R13: 00007ffeae4a7ac8 R14: 00007f4299b86000 R15: 000055ea61493dd8
[ 44.546523] </TASK>
[ 44.546523] Modules linked in:
[ 44.568501] ---[ end trace 0000000000000000 ]---
[ 44.568889] RIP: 0010:ext4_write_inline_data+0xfe/0x100
[ 44.569328] Code: 3c 0e 48 83 c7 48 48 89 de 5b 41 5c 41 5d 41 5e 41 5f 5d e9 e4 fa 43 01 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc 0f 0b <0f> 0b 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 20 49
[ 44.570931] RSP: 0018:ffffb342008b79a8 EFLAGS: 00010216
[ 44.571356] RAX: 0000000000000001 RBX: ffff9329c579c000 RCX: 0000010000000006
[ 44.571959] RDX: 000000000000003c RSI: ffffb342008b79f0 RDI: ffff9329c158e738
[ 44.572571] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000
[ 44.573148] R10: 00007ffffffff000 R11: ffffffff9bd0d910 R12: 0000006210000000
[ 44.573748] R13: fffffc7e4015e700 R14: 0000010000000005 R15: ffff9329c158e738
[ 44.574335] FS: 00007f4299934740(0000) GS:ffff932a60179000(0000) knlGS:0000000000000000
[ 44.575027] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 44.575520] CR2: 00007f4299a1ec90 CR3: 0000000002886002 CR4: 0000000000770eb0
[ 44.576112] PKRU: 55555554
[ 44.576338] Kernel panic - not syncing: Fatal exception
[ 44.576517] Kernel Offset: 0x1a600000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Reported-by: syzbot+fe2a25dae02a207717a0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fe2a25dae02a207717a0
Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://patch.msgid.link/20250415-ext4-prepare-inline-overflow-v1-1-f4c13d900967@igalia.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Leaving s_fc_lock in between during commit in ext4_fc_perform_commit()
function leaves room for subtle concurrency bugs where ext4_fc_del() may
delete an inode from the fast commit list, leaving list in an inconsistent
state.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250508175908.1004880-10-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This allows us to hold s_fc_lock during kmem_cache_* functions, which
is needed in the following patch.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250508175908.1004880-9-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Unlike JBD2 based full commits, there is no dedicated journal thread
for fast commits. Thus to reduce scheduling delays between IO
submission and completion, temporarily elevate the committer thread's
priority to match the configured priority of the JBD2 journal
thread.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250508175908.1004880-8-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch updates code documentation to reflect the commit path changes
made in this series.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
code docs
Link: https://patch.msgid.link/20250508175908.1004880-7-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The new logic introduced in this series does not require tracking number
of active handles open on an inode. So, drop it.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250508175908.1004880-6-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
This patch reworks fast commit's commit path to remove locking the
journal for the entire duration of a fast commit. Instead, we only lock
the journal while marking all the eligible inodes as "committing". This
allows handles to make progress in parallel with the fast commit.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://patch.msgid.link/20250508175908.1004880-5-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Mark inode dirty first and then grab i_data_sem in ext4_setattr().
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://patch.msgid.link/20250508175908.1004880-4-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
If the inode that's being requested to track using ext4_fc_track_inode
is being committed, then wait until the inode finishes the
commit. Also, add calls to ext4_fc_track_inode at the right places.
With this patch, now calling ext4_reserve_inode_write() results in
inode being tracked for next fast commit. This ensures that by the
time ext4_reserve_inode_write() returns, it is ready to be modified
and won't be committed until the corresponding handle is open.
A subtle lock ordering requirement with i_data_sem (which is
documented in the code) requires that ext4_fc_track_inode() be called
before grabbing i_data_sem. So, this patch also adds explicit
ext4_fc_track_inode() calls in places where i_data_sem grabbed.
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://patch.msgid.link/20250508175908.1004880-3-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
Convert ext4_inode_info->i_fc_lock to spinlock to avoid sleeping
in invalid contexts.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://patch.msgid.link/20250508175908.1004880-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
|
|
Ondrej reports that certain SELinux tests are failing after commit
fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is
written frequently"), merged during the v6.15 merge window.
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Fixes: fc2a169c56de ("sunrpc: clean cache_detail immediately when flush is written frequently")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
There is a code path in dequeue_entities() that can set the slice of a
sched_entity to U64_MAX, which sometimes results in a crash.
The offending case is when dequeue_entities() is called to dequeue a
delayed group entity, and then the entity's parent's dequeue is delayed.
In that case:
1. In the if (entity_is_task(se)) else block at the beginning of
dequeue_entities(), slice is set to
cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then
it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX.
2. The first for_each_sched_entity() loop dequeues the entity.
3. If the entity was its parent's only child, then the next iteration
tries to dequeue the parent.
4. If the parent's dequeue needs to be delayed, then it breaks from the
first for_each_sched_entity() loop _without updating slice_.
5. The second for_each_sched_entity() loop sets the parent's ->slice to
the saved slice, which is still U64_MAX.
This throws off subsequent calculations with potentially catastrophic
results. A manifestation we saw in production was:
6. In update_entity_lag(), se->slice is used to calculate limit, which
ends up as a huge negative number.
7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit
is negative, vlag > limit, so se->vlag is set to the same huge
negative number.
8. In place_entity(), se->vlag is scaled, which overflows and results in
another huge (positive or negative) number.
9. The adjusted lag is subtracted from se->vruntime, which increases or
decreases se->vruntime by a huge number.
10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which
incorrectly returns false because the vruntime is so far from the
other vruntimes on the queue, causing the
(vruntime - cfs_rq->min_vruntime) * load calulation to overflow.
11. Nothing appears to be eligible, so pick_eevdf() returns NULL.
12. pick_next_entity() tries to dereference the return value of
pick_eevdf() and crashes.
Dumping the cfs_rq states from the core dumps with drgn showed tell-tale
huge vruntime ranges and bogus vlag values, and I also traced se->slice
being set to U64_MAX on live systems (which was usually "benign" since
the rest of the runqueue needed to be in a particular state to crash).
Fix it in dequeue_entities() by always setting slice from the first
non-empty cfs_rq.
Fixes: aef6987d8954 ("sched/eevdf: Propagate min_slice up the cgroup hierarchy")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/f0c2d1072be229e1bdddc73c0703919a8b00c652.1745570998.git.osandov@fb.com
|
|
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use.
Fixes: 0644b3daca28 ("irqchip/gic-v2m: acpi: Introducing GICv2m ACPI support")
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
|
|
In function kvm_pre_enter_guest(), it prepares to enter guest and check
whether there are pending signals or events. And it will not enter guest
if there are, PMU pass-through preparation for guest should be cancelled
and host should own PMU hardware.
Cc: stable@vger.kernel.org
Fixes: f4e40ea9f78f ("LoongArch: KVM: Add PMU support for guest")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Some registers such as LOONGARCH_CSR_ESTAT and LOONGARCH_CSR_GINTC are
partly cleared with function _kvm_setcsr(). This comes from the hardware
specification, some bits are read only in VM mode, and however they can
be written in host mode. So they are partly cleared in VM mode, and can
be fully cleared in host mode.
These read only bits show pending interrupt or exception status. When VM
reset, the read-only bits should be cleared, otherwise vCPU will receive
unknown interrupts in boot stage.
Here registers LOONGARCH_CSR_ESTAT/LOONGARCH_CSR_GINTC are fully cleared
in ioctl KVM_REG_LOONGARCH_VCPU_RESET vCPU reset path.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Fix multiple typos inside arch/loongarch/kvm.
Cc: stable@vger.kernel.org
Reviewed-by: Yuli Wang <wangyuli@uniontech.com>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Yulong Han <wheatfox17@icloud.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot.
Cc: stable@vger.kernel.org
Acked-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Remove dead code. LoongArch does not have a DMA memory zone (24bit DMA).
The architecture does not even define MAX_DMA_PFN.
Cc: stable@vger.kernel.org
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Like the other relevant symbols, export some fp, lsx, lasx and lbt
assembly symbols and put the function declarations in header files
rather than source files.
While at it, use "asmlinkage" for the other existing C prototypes
of assembly functions and also do not use the "extern" keyword with
function declarations according to the document coding-style.rst.
Cc: stable@vger.kernel.org # 6.6+
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Currently, interrupts need to be disabled before single-step mode is
set, it requires that CSR_PRMD_PIE be cleared in save_local_irqflag()
which is called by setup_singlestep(), this is reasonable.
But in the first kprobe breakpoint exception, if the irq is enabled at
the beginning of do_bp(), it will not be disabled at the end of do_bp()
due to the CSR_PRMD_PIE has been cleared in save_local_irqflag(). So for
this case, it may corrupt exception context when restoring the exception
after do_bp() in handle_bp(), this is not reasonable.
In order to restore exception safely in handle_bp(), it needs to ensure
the irq is disabled at the end of do_bp(), so just add a local variable
to record the original interrupt status in the parent context, then use
it as the check condition to enable and disable irq in do_bp().
While at it, do the similar thing for other do_xyz() exception handlers
to make them more robust.
Fixes: 6d4cc40fb5f5 ("LoongArch: Add kprobes support")
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Co-developed-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
In the current code, the definition of regs_irqs_disabled() is actually
"!(regs->csr_prmd & CSR_CRMD_IE)" because arch_irqs_disabled_flags() is
defined as "!(flags & CSR_CRMD_IE)", it looks a little strange.
Define regs_irqs_disabled() as !(regs->csr_prmd & CSR_PRMD_PIE) directly
to make it more clear, no functional change.
While at it, the return value of regs_irqs_disabled() is true or false,
so change its type to reflect that and also make it always inline.
Fixes: 803b0fc5c3f2 ("LoongArch: Add process management")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
As of commit dce44566192e ("mm/memtest: add ARCH_USE_MEMTEST"),
architectures must select ARCH_USE_MEMTESET to enable CONFIG_MEMTEST.
Commit 628c3bb40e9a ("LoongArch: Add boot and setup routines") added
support for early_memtest but did not select ARCH_USE_MEMTESET.
Fixes: 628c3bb40e9a ("LoongArch: Add boot and setup routines")
Tested-by: Erpeng Xu <xuerpeng@uniontech.com>
Tested-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Yuli Wang <wangyuli@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Make sure that CAN_USE_BPF_ST test (compute_live_registers/store) is
enabled when __clang_major__ >= 18.
Fixes: 2ea8f6a1cda7 ("selftests/bpf: test cases for compute_live_registers()")
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/20250425213712.1542077-1-yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When building the latest samples/bpf on LoongArch Fedora
make M=samples/bpf
There are compilation errors as follows:
In file included from ./linux/samples/bpf/sockex2_kern.c:2:
In file included from ./include/uapi/linux/in.h:25:
In file included from ./include/linux/socket.h:8:
In file included from ./include/linux/uio.h:9:
In file included from ./include/linux/thread_info.h:60:
In file included from ./arch/loongarch/include/asm/thread_info.h:15:
In file included from ./arch/loongarch/include/asm/processor.h:13:
In file included from ./arch/loongarch/include/asm/cpu-info.h:11:
./arch/loongarch/include/asm/loongarch.h:13:10: fatal error: 'larchintrin.h' file not found
^~~~~~~~~~~~~~~
1 error generated.
larchintrin.h is included in /usr/lib64/clang/14.0.6/include,
and the header file location is specified at compile time.
Test on LoongArch Fedora:
https://github.com/fedora-remix-loongarch/releases-info
Signed-off-by: Haoran Jiang <jianghaoran@kylinos.cn>
Signed-off-by: zhangxi <zhangxi@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250425095042.838824-1-jianghaoran@kylinos.cn
|
|
Add namespace to BPF internal symbols used by light skeleton
to prevent abuse and document with the code their allowed usage.
Fixes: b1d18a7574d0 ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20250425014542.62385-1-alexei.starovoitov@gmail.com
|
|
Add test that modifies the map while it's being iterated in such a way that
hangs the kernel thread unless the _safe fix is applied to
bpf_for_each_hash_elem.
Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com>
Link: https://lore.kernel.org/r/20250424153246.141677-3-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
|
|
The _safe variant used here gets the next element before running the callback,
avoiding the endless loop condition.
Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com>
Link: https://lore.kernel.org/r/20250424153246.141677-2-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
|
|
Especially the port manager (tcpm.c) is so major driver that
it should have somebody watching over it who really
understands it, and the port controller interface in
general. Assigning Badhri as the designated reviewer and
restoring the status to Maintained from Orphan.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250407133306.387576-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, setxattrat(2) and getxattrat(2) are wrongly handling the
calls of the from setxattrat(AF_FDCWD, NULL, AT_EMPTY_PATH, ...) and
fail with -EBADF error instead of operating on CWD. Fix it.
Fixes: 6140be90ec70 ("fs/xattr: add *at family syscalls")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250424132246.16822-2-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
I used to maintain Allwinner SoC cpufreq and thermal drivers and
have some work experience in the F2FS file system.
I volunteered to maintain the code together with Slava and Adrian.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/20250423123423.2062619-1-frank.li@vivo.com
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
pipe_clear_nowait has two noinline macros, but we only need one.
I checked the whole tree, and this is the only occurrence:
$ grep -r "noinline .* noinline"
fs/splice.c:static noinline void noinline pipe_clear_nowait(struct file *file)
$
Fixes: 0f99fc513ddd ("splice: clear FMODE_NOWAIT on file if splice/vmsplice is used")
Signed-off-by: "T.J. Mercier" <tjmercier@google.com>
Link: https://lore.kernel.org/20250423180025.2627670-1-tjmercier@google.com
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The recent move of the bdev_statx call to the low-level vfs_getattr_nosec
helper caused it being used by devtmpfs, which leads to deadlocks in
md teardown due to the block device lookup and put interfering with the
unusual lifetime rules in md.
But as handle_remove only works on inodes created and owned by devtmpfs
itself there is no need to use vfs_getattr_nosec vs simply reading the
mode from the inode directly. Switch to that to avoid the bdev lookup
or any other unintentional side effect.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reported-by: Xiao Ni <xni@redhat.com>
Fixes: 777d0961ff95 ("fs: move the bdex_statx call to vfs_getattr_nosec")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/20250423045941.1667425-1-hch@lst.de
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Xiao Ni <xni@redhat.com>
Tested-by: Ayush Jain <Ayush.jain3@amd.com>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
ublk_cancel_cmd() calls io_uring_cmd_done() to complete uring_cmd, but
we may have scheduled task work via io_uring_cmd_complete_in_task() for
dispatching request, then kernel crash can be triggered.
Fix it by not trying to canceling the command if ublk block request is
started.
Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd")
Reported-by: Jared Holzman <jholzman@nvidia.com>
Tested-by: Jared Holzman <jholzman@nvidia.com>
Closes: https://lore.kernel.org/linux-block/d2179120-171b-47ba-b664-23242981ef19@nvidia.com/
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We call io_uring_cmd_complete_in_task() to schedule task_work for handling
UBLK_U_IO_NEED_GET_DATA.
This way is really not necessary because the current context is exactly
the ublk queue context, so call ublk_dispatch_req() directly for handling
UBLK_U_IO_NEED_GET_DATA.
Fixes: 216c8f5ef0f2 ("ublk: replace monitor with cancelable uring_cmd")
Tested-by: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250425013742.1079549-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Restart handling in the previous patch was incorrect, so: move btree
operations into a separate helper, and run it with a lockrestart_do().
Additionally, clarify whether pagecache or the btree takes precedence.
Right now, the btree takes precedence: this is incorrect, but it's
needed to pass fstests. Add a giant comment explaining why.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
bcachefs currently populates fiemap data from the extents btree.
This works correctly when the fiemap sync flag is provided, but if
not, it skips all delalloc extents that have not yet been flushed.
This is because delalloc extents from buffered writes are first
stored as reservation in the pagecache, and only become resident in
the extents btree after writeback completes.
Update the fiemap implementation to process holes between extents by
scanning pagecache for data, via seek data/hole. If a valid data
range is found over a hole in the extent btree, fake up an extent
key and flag the extent as delalloc for reporting to userspace.
Note that this does not necessarily change behavior for the case
where there is dirty pagecache over already written extents, where
when in COW mode, writeback will allocate new blocks for the
underlying ranges. The existing behavior is consistent with btrfs
and it is recommended to use the sync flag for the most up to date
extent state from fiemap.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
The bulk of the loop in bch2_fiemap() involves processing the
current extent key from the iter, including following indirections
and trimming the extent size and such. This patch makes a few
changes to reduce the size of the loop and facilitate future changes
to support delalloc extents.
Define a new bch_fiemap_extent structure to wrap the bkey buffer
that holds the extent key to report to userspace along with
associated fiemap flags. Update bch2_fill_extent() to take the
bch_fiemap_extent as a param instead of the individual fields.
Finally, lift the bulk of the extent processing into a
bch2_fiemap_extent() helper that takes the current key and formats
the bch_fiemap_extent appropriately for the fill function.
No functional changes intended by this patch.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
FIEMAP_FLAG_SYNC handling was deliberately moved into core code in
commit 45dd052e67ad ("fs: handle FIEMAP_FLAG_SYNC in fiemap_prep"),
released in kernel v5.8. Update bcachefs accordingly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
|
|
At the end of the inode, on an extents iterator, peek_slot() has to
advance to the next position to avoid returning a 0 size extent, which
is not allowed.
Changing iter->pos confuses peek_prev(), but we don't need to call
peek_slot() in this case.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The issue this assert is guarding against is that in
BTREE_ITER_filter_snapshots mode we only want to be iterating within a
single inode number - if we iterate into another inode number with keys
for a different snapshot tree, we'll loop arbitrarily long before
finding a key we can return.
This comes up in the unit tests, where we're using inode 0 for our test
keys.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The peek_end() tests expect an empty btree.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we aren't mounting with the correct degraded option, it's helpful to
know that before we fail to mount degraded.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
casefolding results in additional aliases on lookup for the
non-casefolded names - these need invalidating on unlink.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
Zhang Yi
Thadeu Lima de Souza Cascardo
Harshad Shirwadkar
Linus Torvalds
Chuck Lever
Omar Sandoval
Suzuki K Poulose
Bibo Mao
Yulong Han
Ming Wang
Petr Tesarik
Tiezhu Yang
Yuli Wang
Peilin Ye
Haoran Jiang
Alexei Starovoitov
Brandon Kammerdiener
Heikki Krogerus
Jan Kara
Yangtao Li
T.J. Mercier
Christoph Hellwig
Ming Lei
Kent Overstreet
Brian Foster