| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add missing word in the log message:
- ... so future kernels can this automatically
+ ... so future kernels can do this automatically
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20221208190341.1560157-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
These messages:
clipped [mem size 0x00000000 64bit] to [mem size 0xfffffffffffa0000 64bit] for e820 entry [mem 0x0009f000-0x000fffff]
aren't as useful as they could be because (a) the resource is often
IORESOURCE_UNSET, so we print the size instead of the start/end and (b) we
print the available resource even if it is empty after removing the E820
entry.
Print the available space by hand to avoid the IORESOURCE_UNSET problem and
only if it's non-empty. No functional change intended.
Link: https://lore.kernel.org/r/20221208190341.1560157-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
pci_bus_alloc_from_region() allocates MMIO space by iterating through all
the resources available on the bus. The available resource might be
reduced if the caller requires 32-bit space or we're avoiding BIOS or E820
areas.
Don't bother calling allocate_resource() if we need more space than is
available in this resource. This prevents some pointless and annoying
messages about avoided areas.
Link: https://lore.kernel.org/r/20221208190341.1560157-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
Firmware can use EfiMemoryMappedIO to request that MMIO regions be mapped
by the OS so they can be accessed by EFI runtime services, but should have
no other significance to the OS (UEFI r2.10, sec 7.2). However, most
bootloaders and EFI stubs convert EfiMemoryMappedIO regions to
E820_TYPE_RESERVED entries, which prevent Linux from allocating space from
them (see remove_e820_regions()).
Some platforms use EfiMemoryMappedIO entries for PCI MMCONFIG space and PCI
host bridge windows, which means Linux can't allocate BAR space for
hot-added devices.
Remove large EfiMemoryMappedIO regions from the E820 map to avoid this
problem.
Leave small (< 256KB) EfiMemoryMappedIO regions alone because on some
platforms, these describe non-window space that's included in host bridge
_CRS. If we assign that space to PCI devices, they don't work. On the
Lenovo X1 Carbon, this leads to suspend/resume failures.
The previous solution to the problem of allocating BARs in these regions
was to add pci_crs_quirks[] entries to disable E820 checking for these
machines (see d341838d776a ("x86/PCI: Disable E820 reserved region clipping
via quirks")):
Acer DMI_PRODUCT_NAME Spin SP513-54N
Clevo DMI_BOARD_NAME X170KM-G
Lenovo DMI_PRODUCT_VERSION *IIL*
Florent reported the BAR allocation issue on the Clevo NL4XLU. We could
add another quirk for the NL4XLU, but I hope this generic change can solve
it for many machines without having to add quirks.
This change has been tested on Clevo X170KM-G (Konrad) and Lenovo Ideapad
Slim 3 (Matt) and solves the problem even when overriding the existing
quirks by booting with "pci=use_e820".
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216565 Clevo NL4XLU
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206459#c78 Clevo X170KM-G
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1868899 Ideapad Slim 3
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2029207 X1 Carbon
Link: https://lore.kernel.org/r/20221208190341.1560157-2-helgaas@kernel.org
Reported-by: Florent DELAHAYE <kernelorg@undead.fr>
Tested-by: Konrad J Hambrick <kjhambrick@gmail.com>
Tested-by: Matt Hansen <2lprbe78@duck.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
|
|
Previously portdrv allowed the AER service for any device with an AER
capability (assuming Linux had control of AER) even though the AER service
driver only attaches to Root Port and RCECs.
Because get_port_device_capability() included AER for non-RP, non-RCEC
devices, we tried to initialize the AER IRQ even though these devices
don't generate AER interrupts.
Intel DG1 and DG2 discrete graphics cards contain a switch leading to a
GPU. The switch supports AER but not MSI, so initializing an AER IRQ
failed, and portdrv failed to claim the switch port at all. The GPU itself
could be suspended, but the switch could not be put in a low-power state
because it had no driver.
Don't allow the AER service on non-Root Port, non-Root Complex Event
Collector devices. This means we won't enable Bus Mastering if the device
doesn't require MSI, the AER service will not appear in sysfs, and the AER
service driver will not bind to the device.
Link: https://lore.kernel.org/r/20221207084105.84947-1-mika.westerberg@linux.intel.com
Link: https://lore.kernel.org/r/20221210002922.1749403-1-helgaas@kernel.org
Based-on-patch-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
|
|
The No Command Completed Support bit in the Slot Capabilities register
indicates whether Command Completed Interrupt Enable is unsupported.
We already check whether No Command Completed Support bit is set in
pcie_wait_cmd(), and do not wait in this case.
Don't enable this Command Completed Interrupt at all if NCCS is set, so
that when users dump configuration space from userspace, the dump does not
confuse them by saying that Command Completed Interrupt is not supported,
but it is enabled.
Link: https://lore.kernel.org/r/20220927141926.8895-2-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
Add compatible string and clock-definition for mt7986. It needs 4 clocks
for PCIe, define them in binding.
Link: https://lore.kernel.org/r/20221127114142.156573-5-linux@fw-web.de
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
|
|
The PCIe driver covers different SOC which needing different clock
configs. Define them based on compatible.
Link: https://lore.kernel.org/r/20221127114142.156573-4-linux@fw-web.de
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
|
|
The ->get_mode1_ECC_cap callback in the shpchp_hpc_ops struct is never
called, so remove it.
[bhelgaas: squash]
Link: https://lore.kernel.org/r/20221112142859.319733-2-ian@linux.cowan.aero
Link: https://lore.kernel.org/r/20221112142859.319733-3-ian@linux.cowan.aero
Link: https://lore.kernel.org/r/20221112142859.319733-4-ian@linux.cowan.aero
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
It is reported that on some systems pciehp binds to an Upstream Port and
attempts to operate it which causes devices below the Port to disappear
from the bus.
This happens because acpiphp sets dev->is_hotplug_bridge for that Port
(after receiving a Device Check notification on it from the platform
firmware via ACPI) during the enumeration of PCI devices.
get_port_device_capability() sees that dev->is_hotplug_bridge is set and
adds PCIE_PORT_SERVICE_HP to Port services, which allows pciehp to bind to
the Port in question.
Even though this particular problem can be addressed by making the
portdrv_core checks more robust, it also causes power management to work
differently on the affected systems which generally is not desirable (PCIe
Ports with dev->is_hotplug_bridge set have to pass additional tests to be
allowed to go into the D3hot/cold power states which affects runtime PM of
devices below these Ports).
For this reason, amend check_hotplug_bridge() with a PCIe type check to
prevent it from setting dev->is_hotplug_bridge for Upstream Ports.
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/2262230.ElGaqSPkdT@kreacher
Reported-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
It is reported that on some systems pciehp binds to an Upstream Port and
attempts to operate it which causes devices below the Port to disappear
from the bus.
This happens because acpiphp sets dev->is_hotplug_bridge for that Port
(after receiving a Device Check notification on it from the platform
firmware via ACPI) during the enumeration of PCI devices.
get_port_device_capability() sees that dev->is_hotplug_bridge is set and
adds PCIE_PORT_SERVICE_HP to Port services (which allows pciehp to bind to
the Port in question) without consulting the PCIe type, which should be
either Root Port or Downstream Port for the hotplug capability to be
present.
Per PCIe r6.0, sec 7.5.3.2, the Slot Implemented bit is only valid for
Downstream Ports (including Root Ports), and PCIe hotplug depends on the
Slot Capabilities / Control / Status registers.
Make get_port_device_capability() more robust by adding a PCIe type check
to it before adding PCIE_PORT_SERVICE_HP to Port services which helps to
avoid the problem.
[bhelgaas: add spec citation]
Suggested-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/4786090.31r3eYUQgx@kreacher
Reported-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
|
|
When kvasprintf() fails to allocate memory, it returns a NULL pointer.
Return error from pci_request_irq() so we don't dereference it.
[bhelgaas: commit log]
Fixes: 704e8953d3e9 ("PCI/irq: Add pci_request_irq() and pci_free_irq() helpers")
Link: https://lore.kernel.org/r/20221121020029.3759444-1-zengheng4@huawei.com
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Per PCIe r6.0, sec 6.30.1, a data object Length of 0x0 indicates 2^18
DWORDs (256K DW or 1MB) being transferred. Adjust the value of data object
length for this case on both sending side and receiving side.
Don't bother checking whether Length is greater than SZ_1M because all
values of the 18-bit Length field are valid, and it is impossible to
represent anything larger than SZ_1M:
0x00000 256K DW (1M bytes)
0x00001 1 DW (4 bytes)
...
0x3ffff 256K-1 DW (1M - 4 bytes)
[bhelgaas: commit log]
Link: https://lore.kernel.org/r/20221116015637.3299664-1-ming4.li@intel.com
Fixes: 9d24322e887b ("PCI/DOE: Add DOE mailbox support functions")
Signed-off-by: Li Ming <ming4.li@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Thunderbolt/USB4 PCIe tunneling depends on native PCIe hotplug. Enable
pciehp by default if USB4 is enabled.
[bhelgaas: squash, update subject, commit logs, tidy whitespace]
Link: https://lore.kernel.org/r/20221115113857.35800-2-albert.zhou.50@gmail.com
Link: https://lore.kernel.org/r/20221115113857.35800-3-albert.zhou.50@gmail.com
Signed-off-by: Albert Zhou <albert.zhou.50@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
pci_device_is_present() previously didn't work for VFs because it reads the
Vendor and Device ID, which are 0xffff for VFs, which looks like they
aren't present. Check the PF instead.
Wei Gong reported that if virtio I/O is in progress when the driver is
unbound or "0" is written to /sys/.../sriov_numvfs, the virtio I/O
operation hangs, which may result in output like this:
task:bash state:D stack: 0 pid: 1773 ppid: 1241 flags:0x00004002
Call Trace:
schedule+0x4f/0xc0
blk_mq_freeze_queue_wait+0x69/0xa0
blk_mq_freeze_queue+0x1b/0x20
blk_cleanup_queue+0x3d/0xd0
virtblk_remove+0x3c/0xb0 [virtio_blk]
virtio_dev_remove+0x4b/0x80
...
device_unregister+0x1b/0x60
unregister_virtio_device+0x18/0x30
virtio_pci_remove+0x41/0x80
pci_device_remove+0x3e/0xb0
This happened because pci_device_is_present(VF) returned "false" in
virtio_pci_remove(), so it called virtio_break_device(). The broken vq
meant that vring_interrupt() skipped the vq.callback() that would have
completed the virtio I/O operation via virtblk_done().
[bhelgaas: commit log, simplify to always use pci_physfn(), add stable tag]
Link: https://lore.kernel.org/r/20221026060912.173250-1-mst@redhat.com
Reported-by: Wei Gong <gongwei833x@gmail.com>
Tested-by: Wei Gong <gongwei833x@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
Set RCB_MPS mode bit so that data for PCIe read requests up to the size of
the Maximum Payload Size (MPS) are returned in one completion, and data for
PCIe read requests greater than the MPS are split at the specified Read
Completion Boundary setting.
Set RCB_64B so that the Read Compeletion Boundary is 64B.
Link: https://lore.kernel.org/r/20221011184211.18128-6-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
A number of inline functions are called rarely and/or are not
time-critical. Take out the "inline" and let the compiler do its work.
Link: https://lore.kernel.org/r/20221011184211.18128-5-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
It would be nice to replace the PCIe link-up loop as well but
there are too many uses of this that do not poll (and the
read_poll_timeout uses "timeout==0" to loop forever).
Link: https://lore.kernel.org/r/20221011184211.18128-4-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Be prudent and give some time for power and clocks to become stable. As
described in the PCIe CEM specification sections 2.2 and 2.2.1; as well as
PCIe r5.0, 6.6.1.
Link: https://lore.kernel.org/r/20221011184211.18128-3-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
We always wanted to enable Multi-MSI but didn't have a test device until
recently. In addition, there are some devices out there that will ask for
multiple MSI but refuse to work if they are only granted one.
Link: https://lore.kernel.org/r/20221011184211.18128-2-jim2101024@gmail.com
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add unique device-id of 0xb013 for j721s2 platform to oneOf field.
Link: https://lore.kernel.org/r/20221028091716.21414-1-mranostay@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
In order to support mt8195 pcie node, update the yaml to support new
properties of iommu and power-domain, and update the reset-names
property to allow only one 'mac' name.
Link: https://lore.kernel.org/r/20221103025656.8714-2-tinghan.shen@mediatek.com
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: TingHan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
When pci_create_attr() fails, pci_remove_resource_files() is called which
will iterate over the res_attr[_wc] arrays and frees every non NULL entry.
To avoid a double free here set the array entry only after it's clear we
successfully initialized it.
Fixes: b562ec8f74e4 ("PCI: Don't leak memory if sysfs_create_bin_file() fails")
Link: https://lore.kernel.org/r/20221007070735.GX986@pengutronix.de/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
Replace assignment of PCI domain IDs from atomic_inc_return() to
ida_alloc().
Use two IDAs, one for static domain allocations (those which are defined in
device tree) and second for dynamic allocations (all other).
During removal of root bus / host bridge, also release the domain ID. The
released ID can be reused again, for example when dynamically loading and
unloading native PCI host bridge drivers.
This change also allows to mix static device tree assignment and dynamic by
kernel as all static allocations are reserved in dynamic pool.
[bhelgaas: set "err" if "bus->domain_nr < 0"]
Link: https://lore.kernel.org/r/20220714184130.5436-1-pali@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
This reverts commit 6cd514e58f12b211d638dbf6f791fa18d854f09c.
Christophe Fergeau reported that 6cd514e58f12 ("PCI: Clear PCI_STATUS when
setting up device") causes boot failures when trying to start linux guests
with Apple's virtualization framework (for example using
https://developer.apple.com/documentation/virtualization/running_linux_in_a_virtual_machine?language=objc)
6cd514e58f12 only solved a cosmetic problem, so revert it to fix the boot
failures.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2137803
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Replace the string "_UID" with the METHOD_NAME__UID macro so instances are
easier to find.
Link: https://lore.kernel.org/r/20221104032430.186424-1-zouyipeng@huawei.com
Signed-off-by: Yipeng Zou <zouyipeng@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
PCIe r2.0, sec 7.8 added Link Capabilities/Status/Control 2 registers to
the PCIe Capability with Capability Version 2.
Previously we assumed these registers were implemented for all PCIe
Capabilities of version 2 or greater, but in fact they are only
implemented for devices with Links.
Update pcie_capability_reg_implemented() to check whether the device has
a Link.
[bhelgaas: commit log, squash export]
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209100057070.2275@angie.orcam.me.uk
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2209100057300.2275@angie.orcam.me.uk
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Both interrupts, and interrupt names weren't defined in both EP and host
yaml. Also define the only possible interrupt-name as link_state, and
maxItems of interrupts to one.
This patch resolves the following warning:
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: pcie-ep@2910000: Unevaluated properties are not allowed ('interrupt-names', 'interrupts' were unexpected)
From schema Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml
Link: https://lore.kernel.org/r/20221025081909.404107-3-mranostay@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
Add missing 'interrupt-controller' property and related subnodes to resolve
the following warning:
arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dtb: pcie@2910000: Unevaluated properties are not allowed ('interrupt-controller' was unexpected)
From schema: Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml
Link: https://lore.kernel.org/r/20221025081909.404107-2-mranostay@ti.com
Signed-off-by: Matt Ranostay <mranostay@ti.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
|
|
1a1daf097e21 ("PCI/PM: Remove unused pci_driver.suspend_late() hook")
removed the legacy .suspend_late() hook, which was the only user of the
"state" parameter to pci_legacy_suspend_late(), but it neglected to remove
the parameter.
Remove the unused "state" parameter to pci_legacy_suspend_late().
Link: https://lore.kernel.org/r/20221025193502.669091-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As of 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old
ones"), SIMPLE_DEV_PM_OPS() is deprecated in favor of
DEFINE_SIMPLE_DEV_PM_OPS(), which has the advantage that the PM callbacks
don't need to be wrapped with #ifdef CONFIG_PM or tagged with
__maybe_unused.
Convert to DEFINE_SIMPLE_DEV_PM_OPS(). No functional change intended.
Link: https://lore.kernel.org/r/20221025203852.681822-9-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
As of 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old
ones"), SIMPLE_DEV_PM_OPS() is deprecated in favor of
DEFINE_SIMPLE_DEV_PM_OPS(), which has the advantage that the PM callbacks
don't need to be wrapped with #ifdef CONFIG_PM or tagged with
__maybe_unused.
Convert to DEFINE_SIMPLE_DEV_PM_OPS(). No functional change intended.
Link: https://lore.kernel.org/r/20221025203852.681822-8-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
As of 1a3c7bb08826 ("PM: core: Add new *_PM_OPS macros, deprecate old
ones"), SIMPLE_DEV_PM_OPS() is deprecated in favor of
DEFINE_SIMPLE_DEV_PM_OPS(), which has the advantage that the PM callbacks
don't need to be wrapped with #ifdef CONFIG_PM or tagged with
__maybe_unused.
Convert to DEFINE_SIMPLE_DEV_PM_OPS(). No functional change intended.
Link: https://lore.kernel.org/r/20221025203852.681822-7-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
Convert agpgart-nvidia from legacy PCI power management to the generic
power management framework.
Previously agpgart-nvidia used legacy PCI power management, and
agp_nvidia_suspend() and agp_nvidia_resume() were responsible for both
device-specific things and generic PCI things:
agp_nvidia_suspend
pci_save_state <-- generic PCI
pci_set_power_state(PCI_D3hot) <-- generic PCI
agp_nvidia_resume
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
nvidia_configure <-- device-specific
Convert to generic power management where the PCI bus PM methods do the
generic PCI things, and the driver needs only the device-specific part,
i.e.,
suspend_devices_and_enter
dpm_suspend_start(PMSG_SUSPEND)
pci_pm_suspend # PCI bus .suspend() method
agp_nvidia_suspend <-- not needed at all; removed
suspend_enter
dpm_suspend_noirq(PMSG_SUSPEND)
pci_pm_suspend_noirq # PCI bus .suspend_noirq() method
pci_save_state <-- generic PCI
pci_prepare_to_sleep <-- generic PCI
pci_set_power_state
...
dpm_resume_end(PMSG_RESUME)
pci_pm_resume # PCI bus .resume() method
pci_restore_standard_config
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
agp_nvidia_resume # driver->pm->resume
nvidia_configure <-- device-specific
Based on 0aeddbd0cb07 ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
Convert agpgart-ati from legacy PCI power management to the generic power
management framework.
Previously agpgart-ati used legacy PCI power management, and
agp_ati_suspend() and agp_ati_resume() were responsible for both
device-specific things and generic PCI things like saving and restoring
config space and managing power state:
agp_ati_suspend
pci_save_state <-- generic PCI
pci_set_power_state(PCI_D3hot) <-- generic PCI
agp_ati_resume
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
ati_configure <-- device-specific
With generic power management, the PCI bus PM methods do the generic PCI
things, and the driver needs only the device-specific part, i.e.,
suspend_devices_and_enter
dpm_suspend_start(PMSG_SUSPEND)
pci_pm_suspend # PCI bus .suspend() method
agp_ati_suspend <-- not needed at all; removed
suspend_enter
dpm_suspend_noirq(PMSG_SUSPEND)
pci_pm_suspend_noirq # PCI bus .suspend_noirq() method
pci_save_state <-- generic PCI
pci_prepare_to_sleep <-- generic PCI
pci_set_power_state
...
dpm_resume_end(PMSG_RESUME)
pci_pm_resume # PCI bus .resume() method
pci_restore_standard_config
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
agp_ati_resume # driver->pm->resume
ati_configure <-- device-specific
Based on 0aeddbd0cb07 ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-5-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
Convert agpgart-amdk7 from legacy PCI power management to the generic power
management framework.
Previously agpgart-amdk7 used legacy PCI power management, and
agp_amdk7_suspend() and agp_amdk7_resume() were responsible for both
device-specific things and generic PCI things like saving and restoring
config space and managing power state:
agp_amdk7_suspend
pci_save_state <-- generic PCI
pci_set_power_state <-- generic PCI
agp_amdk7_resume
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
amd_irongate_driver.configure <-- device-specific
Convert to generic power management where the PCI bus PM methods do the
generic PCI things, and the driver needs only the device-specific part,
i.e.,
suspend_devices_and_enter
dpm_suspend_start(PMSG_SUSPEND)
pci_pm_suspend # PCI bus .suspend() method
agp_amdk7_suspend <-- not needed at all; removed
suspend_enter
dpm_suspend_noirq(PMSG_SUSPEND)
pci_pm_suspend_noirq # PCI bus .suspend_noirq() method
pci_save_state <-- generic PCI
pci_prepare_to_sleep <-- generic PCI
pci_set_power_state
...
dpm_resume_end(PMSG_RESUME)
pci_pm_resume # PCI bus .resume() method
pci_restore_standard_config
pci_set_power_state(PCI_D0) <-- generic PCI
pci_restore_state <-- generic PCI
agp_amdk7_resume # driver->pm->resume
amd_irongate_driver.configure <-- device-specific
Based on 0aeddbd0cb07 ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
Convert agpgart-intel from legacy PCI power management to the generic power
management framework.
Previously agpgart-intel used legacy PCI power management, and
agp_intel_resume() was responsible for both device-specific things and
generic PCI things like saving and restoring config space and managing
power state.
In this case, agp_intel_suspend() was empty, and agp_intel_resume()
already did only device-specific things, so simply convert it to take a
struct device * instead of a struct pci_dev *.
Based on 0aeddbd0cb07 ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
Convert agpgart-efficeon from legacy PCI power management to the generic
power management framework.
Previously agpgart-efficeon used legacy PCI power management, which means
agp_efficeon_suspend() and agp_efficeon_resume() were responsible for both
device-specific things and generic PCI things like saving and restoring
config space and managing power state.
In this case, agp_efficeon_suspend() was empty, and agp_efficeon_resume()
already did only device-specific things, so simply convert it to take a
struct device * instead of a struct pci_dev *.
Based on 0aeddbd0cb07 ("via-agp: convert to generic power management") by
Vaibhav Gupta <vaibhavgupta40@gmail.com>.
Link: https://lore.kernel.org/r/20221025203852.681822-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Dave Airlie <airlied@redhat.com>
|
|
pcie_port_service_register() and pcie_port_service_unregister() are used
only by the pciehp, aer, dpc, and pme PCIe port service drivers, none of
which can be modules. Unexport pcie_port_service_register() and
pcie_port_service_unregister(). No functional change intended.
Link: https://lore.kernel.org/r/20221019204127.44463-4-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
|
|
Previously several things used by portdrv_core.c and portdrv_pci.c were
shared by defining them in portdrv.h. Now that portdrv_core.c and
portdrv_pci.c have been squashed, move things that can be private into
portdrv.c. No functional change intended.
Link: https://lore.kernel.org/r/20221019204127.44463-3-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
|
|
Squash portdrv_core.c and portdrv_pci.c into portdrv.c to make it easier to
find things. The whole thing is less than 1000 lines, and it's a pain to
bounce back and forth between two files.
Several portdrv_core.c functions were non-static because they were
referenced from portdrv_pci.c. Make them static since they're now all in
portdrv.c.
No functional change intended.
Link: https://lore.kernel.org/r/20221019204127.44463-2-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
|
|
|
|
This reverts commit 78e5a3399421 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a3399421 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1]
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2]
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3]
Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4]
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5]
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes: f110e5a250e3 ("kbuild: refactor single builds of *.ko")
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: David Sterba <dsterba@suse.com>
|
|
After commit d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than
order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2)
requests to buddy like SLUB does.
SLAB has been using kmalloc caches to allocate freelist_idx_t array for
off slab caches. But after the commit, freelist_size can be bigger than
KMALLOC_MAX_CACHE_SIZE.
Instead of using pointer to kmalloc cache, use kmalloc_node() and only
check if the kmalloc cache is off slab during calculate_slab_order().
If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens
as it allocates freelist_idx_t array directly from buddy.
Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Fixes: d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator")
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Github deprecated the git:// links about a year ago, so let's move to
the https:// URLs instead.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stafford Horne <shorne@gmail.com>
|
|
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
struct __attribute__((__packed__)) smb3_notify {
uint32_t completion_filter;
bool watch_tree;
uint32_t data_len;
uint8_t data[];
} __packed;
using CIFS_IOC_NOTIFY_INFO 0xc009cf0b
or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info)
The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
Bjorn Helgaas
Pali Rohár
Frank Wunderlich
Ian Cowan
Rafael J. Wysocki
Zeng Heng
Li Ming
Albert Zhou
Michael S. Tsirkin
Jim Quinlan
Matt Ranostay
Jianjun Wang
Sascha Hauer
Yipeng Zou
Maciej W. Rozycki
Linus Torvalds
Tetsuo Handa
Nathan Chancellor
Masahiro Yamada
Hyeonggon Yoo
Palmer Dabbelt
Steve French