| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This adds baud rate, parity & number of data bits. It's required to get
serial working correctly.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
So far every Northstar device we have seen was using the same serial
console params (115200n8). It probably make the most sense to put it in
some proper dtsi files instead of repeating over and over for every
single device. As different boards may use different bootloaders it
seems the safest idea is to use board specific dtsi files.
Just in case some vendor decides to use different UART (parameters) this
can be always easily overwritten.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Adds crypto hardware (SPU) to Northstar Plus device tree file.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Adds mailbox / PDC to NSP device tree. Needs new compatibility string
to differentiate from NS2 version.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Adding ethernet aliases. These are used, for example, by bootloaders,
to modify the MAC addresses in the device tree.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless
chipsets.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The i2c device tree entry should be disabled by default to match the
current convention in other device tree files. Similarily, enable it on
the XMC board, where it is being used.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add the EHCI and OHCI entries to the Northstar Plus device tree files.
Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add I2C support to the bcm5301x Device Tree. Since no driver changes
are needed to enable this hardware, only the device tree changes are
required to make this functional.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add support for the ARM TWD Watchdog to the bcm5301x device tree. The
ARM TWD timer allocated the register space for the WDT, so this patch
necessitated shrinking that. Also, the GIC masks were added for these.
Signed-off-by: Jon Mason <jonmason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
GIC_PPI flags were misconfigured for the timers, resulting in errors
like:
[ 0.000000] GIC: PPI11 is secure or misconfigured
Changing them to being edge triggered corrects the issue
Suggested-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Such a trigger doesn't exist in Linux and is not needed as LED is being
turned off by default. This could cause errors in LEDs core code when
trying to set default trigger.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Such a trigger doesn't exist in Linux and is not needed as LED is being
turned off by default. This could cause errors in LEDs core code when
trying to set default trigger.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Added two WAN status LEDs and a GPIO key for brightness which were
missing.
Signed-off-by: Aditya Xavier <adityaxavier@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
It's preferred to have DT source files licensed under BSD compatible
license. All new BCM5301X DTS files use ISC so let's also relicense old
ones to it.
Except for me only Hauke was ever touched these files in his commit
9faa5960eef3 ("ARM: BCM5301X: add NAND flash chip description") and
commit bb1d8fba1965 ("ARM: BCM5301X: add NAND flash chip description for
Asus RT-AC87U").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
It's connected to a GPIO pin of an extra controller placed on the PCIe
card.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Tenda AC9 has PCIe controller with just one device connected to it:
0000:00:00.0 14e4:d145 Bridge Device
└─ 0000:01:00.0 14e4:a8db Network Controller
This card is directly on SoC (doesn't use physical connector) and has
BCM43217 chipset with bcma bus. One of its components is ChipCommon core
which is also a GPIO controller. We need to describe it to be able to
add devices using its GPIO pins.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Initial version of DTS to support Broadcom BCM953012HR Northstar
HR platform, similar to, but not the same as existing 953012K.
Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
It's tri-band wireless home router based on BCM47094 AKA BCM4709C0. It
uses 3 x BCM4366 chipsets for wireless.
Panamera seems to be board name used by Linksys.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
The iproc-qspi driver is the SPI driver that should be used going
forward. Modify the SPI DT entry to use this driver, and add an entry
in the bcm953012k DTS file to enable the SPI.
Tested on the bcm953012k board.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
Add the NAND entry in the DTS for the bcm953012k reference board.
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
wireless chipsets. LEDs will be hopefully added later to the DT.
According to some sources it may use the same board as EA6400 and just
differ by an original vendor firmware.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
It's tri-band wireless home router based on BCM4709A0 with 3 x BCM43602
chipsets. LEDs will be hopefully added later to the DT.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
|
|
Fixes: 43a0c6751a32 ("strparser: Stream parser for messages")
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With Sphinx 1.5.3 I get the warning:
WARNING: primary_domain 'C' not found, ignored.
It seems that domain names in Sphinx are case-sensitive and for the C
domain the name must be lower case.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Build of HTML docs failing due to conversion of deviceiobook.tmpl in
8a8a602f and regulator.tmpl in 028f2533 to RST without removing from
DOCBOOKS in Makefile, resulting (in the case of deviceiobook) the
following error:
make[1]: *** No rule to make target 'Documentation/DocBook/deviceiobook.xml', needed by 'Documentation/DocBook/deviceiobook.aux.xml'. Stop.
Makefile:1452: recipe for target 'htmldocs' failed
make: *** [htmldocs] Error 2
Update DOCBOOKS to reflect available books.
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
This commit applies upstream change, commit c8241f8553e8 ("doc: Update
control-dependencies section of memory-barriers.txt"), to Korean
translation.
Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The original link is empty, replace it.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 9d85025b0418 ("docs-rst: create an user's manual book") moved the
sysrq.txt leaving old paths in the kernel docs.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The value we read from the header is in network byte order, whereas
EFX_POPULATE_QWORD_* takes values in host byte order (which it then
converts to little-endian, as MCDI is little-endian).
Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It confuses sparse, which thinks the size isn't constant. Let's achieve
the same thing with a BUILD_BUG_ON, since we know which one should be
bigger and don't expect them ever to change.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function rds_trans_register always returns 0. As such, it is not
necessary to check the returned value.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a potential NULL-pointer exception in rxrpc_do_sendmsg(). The call
state check that I added should have gone into the else-body of the
if-statement where we actually have a call to check.
Found by CoverityScan CID#1414316 ("Dereference after null check").
Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dma_sync_single_for_*() takes the direction in which the buffer
was mapped, not the direction of the sync. We should sync XDP
buffers bidirectionally.
Fixes: ecd63a0217d5 ("nfp: add XDP support in the driver")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit c0f031bc8866 ("nfp_net: use alloc_frag() and build_skb()")
we are allocating buffers which have to hold both the data and skb to
be created in place by build_skb().
FW should only be told about the buffer space it can DMA to, that
is without the build_skb() headroom and tailroom. Note: firmware
applications should validate the buffers against both MTU and
free list buffer size so oversized packets would not pass through
the NIC anyway.
Fixes: c0f031bc8866 ("nfp: use alloc_frag() and build_skb()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ndo_set_mac_address() passes struct sockaddr * as 2nd parameter to
bgmac_set_mac_address() but code assumed u8 *. This caused two bytes
chopping and the wrong mac address was configured.
Signed-off-by: Hari Vyas <hariv@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: 4e209001b86 ("bgmac: write mac address to hardware in ndo_set_mac_address")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a bug in the 'bgmac' driver init sequence that blind writes for init
sequence where it should preserve most bits other than the ones it is
deliberately manipulating.
The code now checks to see if the adapter needs to be brought out of
reset (where as before it was doing an IDM write to bring it out of
reset regardless of whether it was in reset or not). Also, removed
unnecessary usleeps (as there is already a read present to flush the
IDM writes).
Signed-off-by: Zac Schroff <zschroff@broadcom.com>
Signed-off-by: Jon Mason <jon.mason@broadcom.com>
Fixes: f6a95a24957 ("net: ethernet: bgmac: Add platform device support")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This leads to a BUG of the following form:
[ 174.512861] switch: port 2(vif3.0) entered disabled state
[ 174.522735] BUG: sleeping function called from invalid context at
/home/build/linux-linus/mm/vmalloc.c:1441
[ 174.523451] in_atomic(): 1, irqs_disabled(): 0, pid: 28, name: xenwatch
[ 174.524131] CPU: 1 PID: 28 Comm: xenwatch Tainted: G W
4.10.0upstream-11073-g4977ab6-dirty #1
[ 174.524819] Hardware name: MSI MS-7680/H61M-P23 (MS-7680), BIOS V17.0
03/14/2011
[ 174.525517] Call Trace:
[ 174.526217] show_stack+0x23/0x60
[ 174.526899] dump_stack+0x5b/0x88
[ 174.527562] ___might_sleep+0xde/0x130
[ 174.528208] __might_sleep+0x35/0xa0
[ 174.528840] ? _raw_spin_unlock_irqrestore+0x13/0x20
[ 174.529463] ? __wake_up+0x40/0x50
[ 174.530089] remove_vm_area+0x20/0x90
[ 174.530724] __vunmap+0x1d/0xc0
[ 174.531346] ? delete_object_full+0x13/0x20
[ 174.531973] vfree+0x40/0x80
[ 174.532594] set_backend_state+0x18a/0xa90
[ 174.533221] ? dwc_scan_descriptors+0x24d/0x430
[ 174.533850] ? kfree+0x5b/0xc0
[ 174.534476] ? xenbus_read+0x3d/0x50
[ 174.535101] ? xenbus_read+0x3d/0x50
[ 174.535718] ? xenbus_gather+0x31/0x90
[ 174.536332] ? ___might_sleep+0xf6/0x130
[ 174.536945] frontend_changed+0x6b/0xd0
[ 174.537565] xenbus_otherend_changed+0x7d/0x80
[ 174.538185] frontend_changed+0x12/0x20
[ 174.538803] xenwatch_thread+0x74/0x110
[ 174.539417] ? woken_wake_function+0x20/0x20
[ 174.540049] kthread+0xe5/0x120
[ 174.540663] ? xenbus_printf+0x50/0x50
[ 174.541278] ? __kthread_init_worker+0x40/0x40
[ 174.541898] ret_from_fork+0x21/0x2c
[ 174.548635] switch: port 2(vif3.0) entered disabled state
This patch defers the vfree() until after the spinlock is released.
Reported-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch replaces use of 'be->vif' with 'vif' and hence generally
makes the function look tidier. No semantic change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The underlying nlmsg_multicast() already sets sk->sk_err for us to
notify socket overruns, so we should not do anything with this return
value. So we just call nfnetlink_set_err() if:
1) We fail to allocate the netlink message.
or
2) We don't have enough space in the netlink message to place attributes,
which means that we likely need to allocate a larger message.
Before this patch, the internal ESRCH netlink error code was propagated
to userspace, which is quite misleading. Netlink semantics mandate that
listeners just hit ENOBUFS if the socket buffer overruns.
Reported-by: Alexander Alemayhu <alexander@alemayhu.com>
Tested-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In case of adjacent ranges, we may indeed see either the high part of
the range in first place or the low part of it. Remove this incorrect
assumption, let's make sure we annotate the low part of the interval in
case of we have adjacent interva intervals so we hit a matching in
lookups.
Reported-by: Simon Hanisch <hanisch@wh2.tu-dresden.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In commit 82de0be6862cd ("netfilter: Add helper array
register/unregister functions"),
struct nf_conntrack_helper sip[MAX_PORTS][4] was changed to
sip[MAX_PORTS * 4], so the memory init should have been changed to
memset(&sip[4 * i], 0, 4 * sizeof(sip[i]));
But as the sip[] table is allocated in the BSS, it is already set to 0
Fixes: 82de0be6862cd ("netfilter: Add helper array register/unregister functions")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch fixes the typo "Disble" -> "Disable".
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The priv->cmd_msg_buffer is allocated in the probe function, but never
kfree()ed. This patch converts the kzalloc() to resource-managed
kzalloc.
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes five minor style issues, spaces are between bitwise OR
operators.
Signed-off-by: Ethan Zonca <e@ethanzonca.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fixes: 05ca5270005c can: gs_usb: add ethtool set_phys_id callback to locate physical device
The gs_usb driver is performing USB transfers using buffers allocated on
the stack. This causes the driver to not function with vmapped stacks.
Instead, allocate memory for the transfer buffers.
Signed-off-by: Ethan Zonca <e@ethanzonca.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v4.8
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
If the security type specified using a mount option is not supported,
the SMB2 session setup code changes the security type to RawNTLMSSP. We
should instead fail the mount and return an error.
The patch changes the code for SMB2 to make it similar to the code used
for SMB1. Like in SMB1, we now use the global security flags to select
the security method to be used when no security method is specified and
to return an error when the requested auth method is not available.
For SMB2, we also use ntlmv2 as a synonym for nltmssp.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
|
|
Fix two minor sparse compile check warnings
Signed-off-by: Steve French <steve.french@primarydata.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
On architectures that have a cache line size larger than 64 Bytes we start
running into issues where the amount of headroom for the frame starts
shrinking.
The size of skb_shared_info on a system with a 64B L1 cache line size is
320. This increases to 384 with a 128B cache line, and 512 with a 256B
cache line.
In addition the NET_SKB_PAD value increases as well consistent with the
cache line size. As a result when we get to a 256B cache line as seen on
the s390 we end up 768 bytes used by padding and shared info leaving us
with only 1280 bytes to use for data storage. On architectures such as
this we should default to using 3K Rx buffers out of a 8K page instead of
trying to do 1.5K buffers out of a 4K page.
To take all of this into account I have added one small check so that we
compare the max_frame to the amount of actual data we can store. This was
already occurring for igb, but I had overlooked it for ixgbe as it doesn't
have strict limits for 82599 once we enable jumbo frames. By adding this
check we will automatically enable 3K Rx buffers as soon as the maximum
frame size we can handle drops below the standard Ethernet MTU.
I also went through and fixed one small typo that I found where I had left
an IGB in a variable name due to a copy/paste error.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
Rafał Miłecki
Steve Lin
Jon Mason
Jon Mason
Aditya Xavier
Linus Torvalds
WANG Cong
John Keeping
Martyn Welch
SeongJae Park
Cao jin
Krzysztof Kozlowski
Edward Cree
Zhu Yanjun
David Howells
Jakub Kicinski
Hari Vyas
Paul Durrant
Pablo Neira Ayuso
Christophe Leroy
Marc Kleine-Budde
Ethan Zonca
Sachin Prabhu
Steve French
Alexander Duyck