| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There's no need for the ubifs_crypt_is_encrypted() function anymore.
Just use IS_ENCRYPTED() instead, like ext4 and f2fs do. IS_ENCRYPTED()
checks the VFS-level flag instead of the UBIFS-specific flag, but it
shouldn't change any behavior since the flags are kept in sync.
Link: https://lore.kernel.org/r/20191209212721.244396-1-ebiggers@kernel.org
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Document that fscrypt_encrypt_pagecache_blocks() allocates the bounce
page from a mempool, and document what this means for the @gfp_flags
argument.
Link: https://lore.kernel.org/r/20191231181026.47400-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Currently fscrypt_zeroout_range() issues and waits on a bio for each
block it writes, which makes it very slow.
Optimize it to write up to 16 pages at a time instead.
Also add a function comment, and improve reliability by allowing the
allocations of the bio and the first ciphertext page to wait on the
corresponding mempools.
Link: https://lore.kernel.org/r/20191226160813.53182-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
submit_bio_wait() already returns bi_status translated to an errno.
So the additional check of bi_status is redundant and can be removed.
Link: https://lore.kernel.org/r/20191209204509.228942-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
The commit 643fa9612bf1 ("fscrypt: remove filesystem specific
build config option") removed modular support for fs/crypto. This
causes the Crypto API to be built-in whenever fscrypt is enabled.
This makes it very difficult for me to test modular builds of
the Crypto API without disabling fscrypt which is a pain.
As fscrypt is still evolving and it's developing new ties with the
fs layer, it's hard to build it as a module for now.
However, the actual algorithms are not required until a filesystem
is mounted. Therefore we can allow them to be built as modules.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/20191227024700.7vrzuux32uyfdgum@gondor.apana.org.au
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
<linux/fscrypt.h> defines ioctl numbers using the macros like _IOWR()
which are defined in <linux/ioctl.h>, so <linux/ioctl.h> should be
included as a prerequisite, like it is in many other kernel headers.
In practice this doesn't really matter since anyone referencing these
ioctl numbers will almost certainly include <sys/ioctl.h> too in order
to actually call ioctl(). But we might as well fix this.
Link: https://lore.kernel.org/r/20191219185624.21251-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_get_encryption_info() returns 0 if the encryption key is
unavailable; it never returns ENOKEY. So remove checks for ENOKEY.
Link: https://lore.kernel.org/r/20191209212348.243331-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_is_direct_key_policy() is no longer used, so remove it.
Link: https://lore.kernel.org/r/20191209211829.239800-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_valid_enc_modes() is only used by policy.c, so move it to there.
Also adjust the order of the checks to be more natural, matching the
numerical order of the constants and also keeping AES-256 (the
recommended default) first in the list.
No change in behavior.
Link: https://lore.kernel.org/r/20191209211829.239800-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
FSCRYPT_POLICY_FLAG_DIRECT_KEY is currently only allowed with Adiantum
encryption. But FS_IOC_SET_ENCRYPTION_POLICY allowed it in combination
with other encryption modes, and an error wasn't reported until later
when the encrypted directory was actually used.
Fix it to report the error earlier by validating the correct use of the
DIRECT_KEY flag in fscrypt_supported_policy(), similar to how we
validate the IV_INO_LBLK_64 flag.
Link: https://lore.kernel.org/r/20191209211829.239800-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Make fscrypt_supported_policy() call new functions
fscrypt_supported_v1_policy() and fscrypt_supported_v2_policy(), to
reduce the indentation level and make the code easier to read.
Also adjust the function comment to mention that whether the encryption
policy is supported can also depend on the inode.
No change in behavior.
Link: https://lore.kernel.org/r/20191209211829.239800-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add a function fscrypt_needs_contents_encryption() which takes an inode
and returns true if it's an encrypted regular file and the kernel was
built with fscrypt support.
This will allow replacing duplicated checks of IS_ENCRYPTED() &&
S_ISREG() on the I/O paths in ext4 and f2fs, while also optimizing out
unneeded code when !CONFIG_FS_ENCRYPTION.
Link: https://lore.kernel.org/r/20191209205021.231767-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
fscrypt_d_revalidate() and fscrypt_d_ops really belong in fname.c, since
they're specific to filenames encryption. crypto.c is for contents
encryption and general fs/crypto/ initialization and utilities.
Link: https://lore.kernel.org/r/20191209204359.228544-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Constify the struct inode parameter to fscrypt_fname_disk_to_usr() and
the other filename encryption functions so that users don't have to pass
in a non-const inode when they are dealing with a const one, as in [1].
[1] https://lkml.kernel.org/linux-ext4/20191203051049.44573-6-drosen@google.com/
Cc: Daniel Rosenberg <drosen@google.com>
Link: https://lore.kernel.org/r/20191215213947.9521-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Constify the struct fscrypt_hkdf parameter to fscrypt_hkdf_expand().
This makes it clearer that struct fscrypt_hkdf contains the key only,
not any per-request state.
Link: https://lore.kernel.org/r/20191209204054.227736-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
As a sanity check, verify that the allocated crypto_skcipher actually
has the ivsize that fscrypt is assuming it has. This will always be the
case unless there's a bug. But if there ever is such a bug (e.g. like
there was in earlier versions of the ESSIV conversion patch [1]) it's
preferable for it to be immediately obvious, and not rely on the
ciphertext verification tests failing due to uninitialized IV bytes.
[1] https://lkml.kernel.org/linux-crypto/20190702215517.GA69157@gmail.com/
Link: https://lore.kernel.org/r/20191209203918.225691-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Crypto API users shouldn't really be accessing struct skcipher_alg
directly. <crypto/skcipher.h> already has a function
crypto_skcipher_driver_name(), so use that instead.
No change in behavior.
Link: https://lore.kernel.org/r/20191209203810.225302-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Extend the FS_IOC_ADD_ENCRYPTION_KEY ioctl to allow the raw key to be
specified by a Linux keyring key, rather than specified directly.
This is useful because fscrypt keys belong to a particular filesystem
instance, so they are destroyed when that filesystem is unmounted.
Usually this is desired. But in some cases, userspace may need to
unmount and re-mount the filesystem while keeping the keys, e.g. during
a system update. This requires keeping the keys somewhere else too.
The keys could be kept in memory in a userspace daemon. But depending
on the security architecture and assumptions, it can be preferable to
keep them only in kernel memory, where they are unreadable by userspace.
We also can't solve this by going back to the original fscrypt API
(where for each file, the master key was looked up in the process's
keyring hierarchy) because that caused lots of problems of its own.
Therefore, add the ability for FS_IOC_ADD_ENCRYPTION_KEY to accept a
Linux keyring key. This solves the problem by allowing userspace to (if
needed) save the keys securely in a Linux keyring for re-provisioning,
while still using the new fscrypt key management ioctls.
This is analogous to how dm-crypt accepts a Linux keyring key, but the
key is then stored internally in the dm-crypt data structures rather
than being looked up again each time the dm-crypt device is accessed.
Use a custom key type "fscrypt-provisioning" rather than one of the
existing key types such as "logon". This is strongly desired because it
enforces that these keys are only usable for a particular purpose: for
fscrypt as input to a particular KDF. Otherwise, the keys could also be
passed to any kernel API that accepts a "logon" key with any service
prefix, e.g. dm-crypt, UBIFS, or (recently proposed) AF_ALG. This would
risk leaking information about the raw key despite it ostensibly being
unreadable. Of course, this mistake has already been made for multiple
kernel APIs; but since this is a new API, let's do it right.
This patch has been tested using an xfstest which I wrote to test it.
Link: https://lore.kernel.org/r/20191119222447.226853-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
|
|
An ino is unsigned, so display it as such in /proc/locks.
Cc: stable@vger.kernel.org
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
|
|
This is needed by LKDTM (crash dump test module), it calls
flush_icache_range(), which on RISC-V turns into flush_icache_all(). On
other architectures, the actual implementation is exported, so follow
that precedence and export it here too.
Fixes build of CONFIG_LKDTM that fails with:
ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined!
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops
with "Unable to handle kernel paging request at virtual address" message. This
happens when enosys stressor starts testing random non-valid syscalls.
I forgot to redirect any syscall below -1 to sys_ni_syscall.
With the patch kernel oops messages are gone while running stress-ng enosys
stressor.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
When support for !MMU was added, the declaration of
__asm_copy_to_user() & __asm_copy_from_user() were #ifdefed
out hence their EXPORT_SYMBOL() give an error message like:
.../riscv_ksyms.c:13:15: error: '__asm_copy_to_user' undeclared here
.../riscv_ksyms.c:14:15: error: '__asm_copy_from_user' undeclared here
Since these symbols are not defined with !MMU it's wrong to export them.
Same for __clear_user() (even though this one is also declared in
include/asm-generic/uaccess.h and thus doesn't give an error message).
Fix this by doing the EXPORT_SYMBOL() directly where these symbols
are defined: inside lib/uaccess.S itself.
Fixes: 6bd33e1ece52 ("riscv: fix compile failure with EXPORT_SYMBOL() & !MMU")
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The downstream implementation of ahci_brcm.c did contain clock
management recovery, but until recently, did that outside of the
libahci_platform helpers and this was unintentionally stripped out while
forward porting the patch upstream.
Add the missing clock management during recovery and sleep for 10
milliseconds per the design team recommendations to ensure the SATA PHY
controller and AFE have been fully quiesced.
Fixes: eb73390ae241 ("ata: ahci_brcm: Recover from failures to identify devices")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Set AHCI_HFLAG_DELAY_ENGINE for the BCM7425 AHCI controller thus making
it conforming to the 'strict' AHCI implementation which this controller
is based on.
This solves long link establishment with specific hard drives (e.g.:
Seagate ST1000VM002-9ZL1 SC12) that would otherwise have to complete the
error recovery handling before finally establishing a succesful SATA
link at the desired speed.
We re-order the hpriv->flags assignment to also remove the NONCQ quirk
since we can set the flag directly.
Fixes: 9586114cf1e9 ("ata: ahci_brcmstb: add support MIPS-based platforms")
Fixes: 423be77daabe ("ata: ahci_brcmstb: add quirk for broken ncq")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The AHCI resources management within ahci_brcm.c is a little
convoluted, largely because it historically had a dedicated clock that
was managed within this file in the downstream tree. Once brough
upstream though, the clock was left to be managed by libahci_platform.c
which is entirely appropriate.
This patch series ensures that the AHCI resources are fetched and
enabled before any register access is done, thus avoiding bus errors on
platforms which clock gate the controller by default.
As a result we need to re-arrange the suspend() and resume() functions
in order to avoid accessing registers after the clocks have been turned
off respectively before the clocks have been turned on. Finally, we can
refactor brcm_ahci_get_portmask() in order to fetch the number of ports
from hpriv->mmio which is now accessible without jumping through hoops
like we used to do.
The commit pointed in the Fixes tag is both old and new enough not to
require major headaches for backporting of this patch.
Fixes: eba68f829794 ("ata: ahci_brcmstb: rename to support across Broadcom SoC's")
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This reverts commit 6bb86fefa086faba7b60bb452300b76a47cde1a5
("libahci_platform: Staticize ahci_platform_<en/dis>able_phys()") we are
going to need ahci_platform_{enable,disable}_phys() in a subsequent
commit for ahci_brcm.c in order to properly control the PHY
initialization order.
Also make sure the function prototypes are declared in
include/linux/ahci_platform.h as a result.
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
ata_qc_complete_multiple() is called with a mask of the still active
tags.
mv_sata doesn't have this information directly and instead calculates
the still active tags from the started tags (ap->qc_active) and the
finished tags as (ap->qc_active ^ done_mask)
Since 28361c40368 the hw_tag and tag are no longer the same and the
equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is
initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is
started and this will be in done_mask on completion. ap->qc_active ^
done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as
the internal tag will never be reported as completed.
This is fixed by introducing ata_qc_get_active() which returns the
active hardware tags and calling it where appropriate.
This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same
problem. There is another case in sata_nv that most likely needs fixing
as well, but this looks a little different, so I wasn't confident enough
to change that.
Fixes: 28361c403683 ("libata: add extra internal command")
Cc: stable@vger.kernel.org
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add missing export of ata_qc_get_active(), as per Pali.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Reschedule the current IO worker to cut the risk that it is becoming
a cpu hog.
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The rseq.h UAPI now documents that the rseq_cs field must be cleared
before reclaiming memory that contains the targeted struct rseq_cs, but
also that the rseq_cs field must be cleared before reclaiming memory of
the code pointed to by the rseq_cs start_ip and post_commit_offset
fields.
While we can expect that use of dlclose(3) will typically unmap
both struct rseq_cs and its associated code at once, nothing would
theoretically prevent a JIT from reclaiming the code without
reclaiming the struct rseq_cs, which would erroneously allow the
kernel to consider new code which is not a rseq critical section
as a rseq critical section following a code reclaim.
Suggested-by: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
glibc 2.30 introduces gettid() in public headers, which clashes with
the internal static definition within rseq selftests.
Rename gettid() to rseq_gettid() to eliminate this symbol name clash.
Reported-by: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Tommi T. Rantala <tommi.t.rantala@nokia.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Paul E. McKenney" <paulmck@linux.ibm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Paul Turner <pjt@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
Eric Biggers
Herbert Xu
Linus Torvalds
Amir Goldstein
Olof Johansson
David Abdurachmanov
Luc Van Oostenryck
Florian Fainelli
Sascha Hauer
Hillf Danton
Mathieu Desnoyers