| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Eliminate duplicate boilerplate code for simple modules that contain
a single DM target driver without any additional setup code.
Add a new module_dm() macro, which replaces the module_init() and
module_exit() with template functions that call dm_register_target()
and dm_unregister_target() respectively.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
clang with W=1 reports
drivers/md/dm-raid.c:2212:15: error: variable
'd' set but not used [-Werror,-Wunused-but-set-variable]
unsigned int d;
^
This variable is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Pointer variables of void * type do not require type cast.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Simplifies each DM target's init method by making dm_register_target()
responsible for its error reporting (on behalf of targets).
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Otherwise the journal_io_cache will leak if dm_register_target() fails.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Otherwise the _hydration_cache will leak if dm_register_target() fails.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add io_err_io_hints() and set discard limits so that the zero target
advertises support for discards.
The error target will return -EIO for discards.
This is useful when the user combines dm-error with other
discard-supporting targets in the same table; without dm-error
support, discards would be disabled for the whole combined device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add zero_io_hints() and set discard limits so that the zero target
advertises support for discards.
The zero target will ignore discards.
This is useful when the user combines dm-zero with other
discard-supporting targets in the same table; without dm-zero support,
discards would be disabled for the whole combined device.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
In dm_calculate_queue_limits, add call to ->io_hints hook if the
target doesn't provide ->iterate_devices.
This is needed so the "error" and "zero" targets may support
discards. The 2 following commits will add their respective discard
support.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
dm-verity signals integrity violations by returning I/O errors
to user space. To identify integrity violations by a controlling
instance, the kernel audit subsystem can be used to emit audit
events to user space. Analogous to dm-integrity, we also use the
dm-audit submodule allowing to emit audit events on verification
failures of metadata and data blocks as well as if max corrupted
errors are reached.
The construction and destruction of verity device mappings are
also relevant for auditing a system. Thus, those events are also
logged as audit events.
Tested by starting a container with the container manager (cmld) of
GyroidOS which uses a dm-verity protected rootfs image root.img mapped
to /dev/mapper/<uuid>-root. One block was manipulated in the
underlying image file and repeated reads of the verity device were
performed again until the max corrupted errors is reached, e.g.:
dd if=/dev/urandom of=root.img bs=512 count=1 seek=1000
for i in range {1..101}; do \
dd if=/dev/mapper/<uuid>-root of=/dev/null bs=4096 \
count=1 skip=1000 \
done
The resulting audit log looks as follows:
type=DM_CTRL msg=audit(1677618791.876:962):
module=verity op=ctr ppid=4876 pid=29102 auid=0 uid=0 gid=0
euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=44
comm="cmld" exe="/usr/sbin/cml/cmld" subj=unconfined
dev=254:3 error_msg='success' res=1
type=DM_EVENT msg=audit(1677619463.786:1074): module=verity
op=verify-data dev=7:0 sector=1000 res=0
...
type=DM_EVENT msg=audit(1677619596.727:1162): module=verity
op=verify-data dev=7:0 sector=1000 res=0
type=DM_EVENT msg=audit(1677619596.731:1163): module=verity
op=max-corrupted-errors dev=254:3 sector=? res=0
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return
directly. But if FEC configured, it is desired to correct the data page
through verity_verify_io. And the return value will be converted to
blk_status and passed to verity_finish_io().
BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips
verification regardless of I/O error for the corresponding bio. In this
case, the I/O error could not be returned properly, and as a result,
there is a problem that abnormal data could be read for the
corresponding block.
To fix this problem, when an I/O error occurs, do not skip verification
even if the bit related is set in v->validated_blocks.
Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once")
Cc: stable@vger.kernel.org
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Both bufio and bio-prison-v1 use the identical model for splitting
their respective locks and rbtrees. Improve dm_num_hash_locks() to
distribute across more rbtrees to improve overall performance -- but
the maximum number of locks/rbtrees is still 64.
Also factor out a common hash function named dm_hash_locks_index(),
the magic numbers used were determined to be best using this program:
https://gist.github.com/jthornber/e05c47daa7b500c56dc339269c5467fc
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Size the dm_bio_prison's number of prison_region structs using
dm_num_hash_locks().
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add num_locks member to dm_bio_prison struct and use it rather than
the NR_LOCKS magic value (64).
Next commit will size the dm_bio_prison's prison_regions according to
dm_num_hash_locks().
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Size the dm_buffer_cache's number of buffer_tree structs using
dm_num_hash_locks().
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Add num_locks member to dm_buffer_cache struct and use it rather than
the NR_LOCKS magic value (64).
Next commit will size the dm_buffer_cache's buffer_trees according to
dm_num_hash_locks().
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Simple helper to use when DM core code needs to appropriately size,
based on num_online_cpus(), its data structures that split locks.
dm_num_hash_locks() rounds up num_online_cpus() to next power of 2
but caps return at DM_HASH_LOCKS_MAX (64).
This heuristic may evolve as warranted, but as-is it will serve as a
more informed basis for sizing the sharded lock structs in dm-bufio's
dm_buffer_cache (buffer_trees) and dm-bio-prison-v1's dm_bio_prison
(prison_regions).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Don't have bio_detain() BUG_ON if a dm_cell_key is beyond
BIO_PRISON_MAX_RANGE or spans a boundary.
Update dm-thin.c:build_key() to use dm_cell_key_has_valid_range() which
will do this checking without using BUG_ON. Also update
process_discard_bio() to check the discard bio that DM core passes in
(having first imposed max_discard_granularity based splitting).
dm_cell_key_has_valid_range() will merely WARN_ON_ONCE if it returns
false because if it does: it is programmer error that should be caught
with proper testing. So relax the BUG_ONs to be WARN_ON_ONCE.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Split the bio prison into multiple regions, with a separate rbtree and
associated lock for each region.
To get fast bio prison locking and not damage the performance of
discards too much the bio-prison now stipulates that discards should
not cross a BIO_PRISON_MAX_RANGE boundary.
Because the range of a key (block_end - block_begin) must not exceed
BIO_PRISON_MAX_RANGE: break_up_discard_bio() now ensures the data
range reflected in PHYSICAL key doesn't exceed BIO_PRISON_MAX_RANGE.
And splitting the thin target's discards (handled with VIRTUAL key) is
achieved by updating dm-thin.c to set limits->max_discard_sectors in
terms of BIO_PRISON_MAX_RANGE _and_ setting the thin and thin-pool
targets' max_discard_granularity to true.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The block core (bio_split_discard) will already split discards based
on the 'discard_granularity' and 'max_discard_sectors' queue_limits.
But the DM thin target also needs to ensure that it doesn't receive a
discard that spans a 'max_discard_sectors' boundary.
Introduce a dm_target 'max_discard_granularity' flag that if set will
cause DM core to split discard bios relative to 'max_discard_sectors'.
This treats 'discard_granularity' as a "min_discard_granularity" and
'max_discard_sectors' as a "max_discard_granularity".
Requested-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Reduce the time that a spinlock is held in cell_defer_no_holder().
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The kernel supports multi page bio vector entries, so we can use them
in dm-bufio as an optimization.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Save one spinlock by using waitqueue_active. We hold the bufio lock at
this place, so no one can add entries to the waitqueue at this point.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Movement also consolidates holes in dm_bufio_client struct. But the
overall size of the struct isn't changed.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Sometimes it is beneficial to repeatedly get and drop locks as part of
an iteration. Introduce lock_history struct to help avoid redundant
drop and gets of the same lock.
Optimizes cache_iterate, cache_mark_many and cache_evict.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
When multiple threads perform IO to a thin device, the underlying
dm_bufio object can become a bottleneck; slowing down access to btree
nodes that store the thin metadata. Prior to this commit, each bufio
instance had a single mutex that was taken for every bufio operation.
This commit concentrates on improving the common case where: a user of
dm_bufio wishes to access, but not modify, a buffer which is already
within the dm_bufio cache.
Implementation::
The code has been refactored; pulling out an 'lru' abstraction and a
'buffer cache' abstraction (see 2 previous commits). This commit
updates higher level bufio code (that performs allocation of buffers,
IO and eviction/cache sizing) to leverage both abstractions. It also
deals with the delicate locking requirements of both abstractions to
provide finer grained locking. The result is significantly better
concurrent IO performance.
Before this commit, bufio has a global lru list it used to evict the
oldest, clean buffers from _all_ clients. With the new locking we
don’t want different ways to access the same buffer, so instead
do_global_cleanup() loops around the clients asking them to free
buffers older than a certain time.
This commit also converts many old BUG_ONs to WARN_ON_ONCE, see the
lru_evict and cache_evict code in particular. They will return
ER_DONT_EVICT if a given buffer somehow meets the invariants that
should _never_ happen. [Aside from revising this commit's header and
fixing coding style and whitespace nits: this switching to
WARN_ON_ONCE is Mike Snitzer's lone contribution to this commit]
Testing::
Some of the low level functions have been unit tested using dm-unit:
https://github.com/jthornber/dm-unit/blob/main/src/tests/bufio.rs
Higher level concurrency and IO is tested via a test only target
found here:
https://github.com/jthornber/linux/blob/2023-03-24-thin-concurrency-9/drivers/md/dm-bufio-test.c
The associated userland side of these tests is here:
https://github.com/jthornber/dmtest-python/blob/main/src/dmtest/bufio/bufio_tests.py
In addition the full dmtest suite of tests (dm-thin, dm-cache, etc)
has been run (~450 tests).
Performance::
Most bufio operations have unchanged performance. But if multiple
threads are attempting to get buffers concurrently, and these
buffers are already in the cache then there's a big speed up. Eg,
one test has 16 'hotspot' threads simulating btree lookups while
another thread dirties the whole device. In this case the hotspot
threads acquire the buffers about 25 times faster.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The buffer cache is responsible for managing the holder count,
tracking clean/dirty state, and choosing buffers via predicates.
Higher level code is responsible for allocation of buffers, IO and
eviction/cache sizing.
The buffer cache has thread safe methods for acquiring a reference
to an existing buffer. All other methods in buffer cache are _not_
threadsafe, and only contain enough locking to guarantee the safe
methods.
Rather than a single mutex, sharded rw_semaphores are used to allow
concurrent threads to 'get' buffers. Each rw_semaphore protects its
own rbtree of buffer entries.
Code that uses this new dm_buffer_cache abstraction will be introduced
in a following commit.
This commit moves the dm_buffer struct in preparation for finer grained
dm_buffer changes, in the next commit, to be more easily seen. It also
introduces temporary dm_buffer struct members to allow compilation of
this intermediate commit (they will be elided in the next commit).
This commit will cause "defined but not used" compiler warnings that
will be resolved by the next commit.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
A CLOCK algorithm is used in this LRU abstraction. This avoids
relinking list nodes, which would require a write lock protecting it.
None of the LRU methods are threadsafe; locking must be done at a
higher level.
Code that uses this new LRU will be introduced in the next 2 commits.
As such, this commit will cause "defined but not used" compiler warnings
that will be resolved by the next 2 commits.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Reasonable to relax to WARN_ON because these are easily avoided but do
offer some assurance future coding mistakes won't occur (if changes
tested properly).
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
All these instances are entirely avoidable given that they speak to
coding mistakes that result in inappropriate use. Proper testing during
development will catch any such coding bug so its best to relax all of
these from BUG_ON to WARN_ON_ONCE.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Using BUG_ON when tearing down is excessive. Relax these to WARN_ONs.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Was used by multi-snapshot DM target that never went upstream.
Signed-off-by: Joe Thornber <ejt@redhat.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Commit 7dd76d1feec70 ("dm: improve bio splitting and associated IO
accounting") only called setup_split_accounting() from
__send_duplicate_bios() if a single bio were being issued. But the case
where duplicate bios are issued must call it too.
Otherwise the bio won't be split and resubmitted (via recursion through
block core back to DM) to submit the later portions of a bio (which may
map to an entirely different target).
For example, when discarding an entire DM striped device with the
following DM table:
vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048
vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048
Before (broken, discards the first striped target's devices twice):
device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872
device-mapper: striped: target_stripe=0, bdev=7:0, start=2049 len=22528
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=22528
After (works as expected):
device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872
device-mapper: striped: target_stripe=0, bdev=7:2, start=2048 len=22528
device-mapper: striped: target_stripe=1, bdev=7:3, start=2048 len=22528
Fixes: 7dd76d1feec70 ("dm: improve bio splitting and associated IO accounting")
Cc: stable@vger.kernel.org
Reported-by: Orange Kao <orange@aiven.io>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
"Abnormal" bios include discards, write zeroes and secure erase. By no
longer passing the calculated 'len' pointer, commit 7dd06a2548b2 ("dm:
allow dm_accept_partial_bio() for dm_io without duplicate bios") took a
senseless approach to disallowing dm_accept_partial_bio() from working
for duplicate bios processed using __send_duplicate_bios().
It inadvertently and incorrectly stopped the use of 'len' when
initializing a target's io (in alloc_tio). As such the resulting tio
could address more area of a device than it should.
For example, when discarding an entire DM striped device with the
following DM table:
vg-lvol0: 0 159744 striped 2 128 7:0 2048 7:1 2048
vg-lvol0: 159744 45056 striped 2 128 7:2 2048 7:3 2048
Before this fix:
device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=102400
blkdiscard: attempt to access beyond end of device
loop0: rw=2051, sector=2048, nr_sectors = 102400 limit=81920
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=102400
blkdiscard: attempt to access beyond end of device
loop1: rw=2051, sector=2048, nr_sectors = 102400 limit=81920
After this fix;
device-mapper: striped: target_stripe=0, bdev=7:0, start=2048 len=79872
device-mapper: striped: target_stripe=1, bdev=7:1, start=2048 len=79872
Fixes: 7dd06a2548b2 ("dm: allow dm_accept_partial_bio() for dm_io without duplicate bios")
Cc: stable@vger.kernel.org
Reported-by: Orange Kao <orange@aiven.io>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
|
|
At some point in between sending this patch to the list and merging it
into for-next, the tracepoints got all mixed up because I've
over-reliant on automated tools not sucking. The end result is that the
tracepoints are all wrong, so fix them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
If user does forced unmount ("umount -f") while files are still open
on the share (as was seen in a Kubernetes example running on SMB3.1.1
mount) then we were marking the share as "TID_EXITING" in umount_begin()
which caused all subsequent operations (except write) to fail ... but
unfortunately when umount_begin() is called we do not know yet that
there are open files or active references on the share that would prevent
unmount from succeeding. Kubernetes had example when they were doing
umount -f when files were open which caused the share to become
unusable until the files were closed (and the umount retried).
Fix this so that TID_EXITING is not set until we are about to send
the tree disconnect (not at the beginning of forced umounts in
umount_begin) so that if "umount -f" fails (due to open files or
references) the mount is still usable.
Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Get rid of any prefix paths in @path before lookup_positive_unlocked()
as it will call ->lookup() which already adds those prefix paths
through build_path_from_dentry().
This has caused a performance regression when mounting shares with a
prefix path where readdir(2) would end up retrying several times to
open bad directory names that contained duplicate prefix paths.
Fix this by skipping any prefix paths in @path before calling
lookup_positive_unlocked().
Fixes: e4029e072673 ("cifs: find and use the dentry for cached non-root directories also")
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Performance tests with large number of threads noted that the change
of the default closetimeo (deferred close timeout between when
close is done by application and when client has to send the close
to the server), to 5 seconds from 1 second, significantly degraded
perf in some cases like this (in the filebench example reported,
the stats show close requests on the wire taking twice as long,
and 50% regression in filebench perf). This is stil configurable
via mount parm closetimeo, but to be safe, decrease default back
to its previous value of 1 second.
Reported-by: Yin Fengwei <fengwei.yin@intel.com>
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/lkml/997614df-10d4-af53-9571-edec36b0e2f3@intel.com/
Fixes: 5efdd9122eff ("smb3: allow deferred close timeout to be configurable")
Cc: stable@vger.kernel.org # 6.0+
Tested-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Make sure to unload_nls() @nls_codepage if we no longer need it.
Fixes: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add DMI info of the Medion S17413 (board M1xA) to the IRQ override
quirk table. This fixes the keyboard not working on these laptops.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=213031
Signed-off-by: Aymeric Wibo <obiwac@gmail.com>
[ rjw: Fixed up white space ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Prior to commit 7ac2ff8bb371, when we loaded the incore perag structure
with information from the AGF header, we would set or clear the
pagf_agfl_reset field based on whether or not the AGFL list was
misaligned within the block. IOWs, it's an incore state bit that's
supposed to cache something in the ondisk metadata. Therefore, the code
still needs to support clearing the incore bit if (somehow) the AGFL
were to correct itself.
It turns out that xfs_repair does exactly this -- phase 4 loads the AGF
to scan the rmapbt for corrupt records, which can set NEEDS_AGFL_RESET.
The scan unsets AGF_INIT but doesn't unset NEEDS_AGFL_RESET. Phase 5
totally rewrites the AGFL and fixes the alignment problem, didn't clear
NEEDS_AGFL_RESET historically, and reloads the perag state to fix the
freelist. This results in the AGFL being reset based on stale data,
which then causes the new AGFL blocks to be leaked. A subsequent
xfs_repair -n then complains about the leaks.
One could argue that phase 5 ought to clear this bit directly when it
reloads the perag AGF data after rewriting the AGFL, but libxfs used to
handle this for us, so it should go back to doing that.
Found by fuzzing flfirst = ones in xfs/352.
Fixes: 7ac2ff8bb371 ("xfs: perags need atomic operational state")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
In xfs_buffered_write_iomap_begin, @icur is the iext cursor for the data
fork and @ccur is the cursor for the cow fork. Pass in whichever cursor
corresponds to allocfork, because otherwise the xfs_iext_prev_extent
call can use the data fork cursor to walk off the end of the cow fork
structure. Best case it returns the wrong results, worst case it does
this:
stack segment: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 3141909 Comm: fsstress Tainted: G W 6.3.0-rc2-xfsx #6.3.0-rc2 7bf5cc2e98997627cae5c930d890aba3aeec65dd
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
RIP: 0010:xfs_iext_prev+0x71/0x150 [xfs]
RSP: 0018:ffffc90002233aa8 EFLAGS: 00010297
RAX: 000000000000000f RBX: 000000000000000e RCX: 000000000000000c
RDX: 0000000000000002 RSI: 000000000000000e RDI: ffff8883d0019ba0
RBP: 989642409af8a7a7 R08: ffffea0000000001 R09: 0000000000000002
R10: 0000000000000000 R11: 000000000000000c R12: ffffc90002233b00
R13: ffff8883d0019ba0 R14: 989642409af8a6bf R15: 000ffffffffe0000
FS: 00007fdf8115f740(0000) GS:ffff88843fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdf8115e000 CR3: 0000000357256000 CR4: 00000000003506e0
Call Trace:
<TASK>
xfs_iomap_prealloc_size.constprop.0.isra.0+0x1a6/0x410 [xfs 619a268fb2406d68bd34e007a816b27e70abc22c]
xfs_buffered_write_iomap_begin+0xa87/0xc60 [xfs 619a268fb2406d68bd34e007a816b27e70abc22c]
iomap_iter+0x132/0x2f0
iomap_file_buffered_write+0x92/0x330
xfs_file_buffered_write+0xb1/0x330 [xfs 619a268fb2406d68bd34e007a816b27e70abc22c]
vfs_write+0x2eb/0x410
ksys_write+0x65/0xe0
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Found by xfs/538 in alwayscow mode, but this doesn't seem particular to
that test.
Fixes: 590b16516ef3 ("xfs: refactor xfs_iomap_prealloc_size")
Actually-Fixes: 66ae56a53f0e ("xfs: introduce an always_cow mode")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
When multiple processes/channels do reconnects in parallel
we used to return success immediately
negotiate/session-setup/tree-connect, causing race conditions
between processes that enter the function in parallel.
This caused several errors related to session not found to
show up during parallel reconnects.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We do not dump the file path for smb3_open_enter ftrace
calls, which is a severe handicap while debugging
using ftrace evens. This change adds that info.
Unfortunately, we're not updating the path in open params
in many places; which I had to do as a part of this change.
SMB2_open gets path in utf16 format, but it's easier of
path is supplied as char pointer in oparms.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
The error handling for platform_get_irq() failing no longer
works after a recent change, clang now points this out with
a warning:
drivers/gpu/host1x/dev.c:520:6: error: variable 'syncpt_irq' is uninitialized when used here [-Werror,-Wuninitialized]
if (syncpt_irq < 0)
^~~~~~~~~~
Fix this by removing the variable and checking the correct
error status.
Fixes: 625d4ffb438c ("gpu: host1x: Rewrite syncpoint interrupt handling")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127221418.2522612-1-arnd@kernel.org
|
|
ksmbd disconnect connection when mounting with vers=smb1.
ksmbd should send smb1 negotiate response to client for correct
unsupported error return. This patch add needed SMB1 macros and fill
NegProt part of the response for smb1 negotiate response.
Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It is possible to peep kernel page's data by providing larger `insize`
in struct cros_ec_command[1] when invoking EC host commands.
Fix it by using zeroed memory.
[1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74
Fixes: eda2e30c6684 ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230324010658.1082361-1-tzungbi@kernel.org
|
|
We already have newline in TP_printk so remove the redundant newline
character at the end of the mmap trace.
<...>-345 [006] ..... 95.589290: exit_mmap: mt_mod ...
<...>-345 [006] ..... 95.589413: vm_unmapped_area: addr=...
<...>-345 [006] ..... 95.589571: vm_unmapped_area: addr=...
<...>-345 [006] ..... 95.589606: vm_unmapped_area: addr=...
to
<...>-336 [006] ..... 44.762506: exit_mmap: mt_mod ...
<...>-336 [006] ..... 44.762654: vm_unmapped_area: addr=...
<...>-336 [006] ..... 44.762794: vm_unmapped_area: addr=...
<...>-336 [006] ..... 44.762835: vm_unmapped_area: addr=...
Link: https://lkml.kernel.org/r/ZAu6qDsNPmk82UjV@minwoo-desktop
FIxes: df529cabb7a25 ("mm: mmap: add trace point of vm_unmapped_area")
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
Yangtao Li
Tom Rix
Yu Zhe
Mike Snitzer
Mikulas Patocka
Michael Weiß
Yeongjin Gil
Joe Thornber
Linus Torvalds
Darrick J. Wong
Steve French
Paulo Alcantara
Aymeric Wibo
Shyam Prasad N
Arnd Bergmann
Namjae Jeon
Tzung-Bi Shih
Minwoo Im