| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support for the local memory PICe resizable bar, so that
local memory can be resized to the maximum size supported by the device,
and mapped correctly to the PCIe memory bar. It is usual that GPU
devices expose only 256MB BARs primarily to be compatible with 32-bit
systems. So, those devices cannot claim larger memory BAR windows size due
to the system BIOS limitation. With this change, it would be possible to
reprogram the windows of the bridge directly above the requesting device
on the same BAR type.
v2:Moved code to gt/intel_region_lmem.c and used only
single underscore for function names.(Jani)
v3: Optimised code.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Michael J Ruhl <michael.j.ruhl@intel.com>
Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Priyanka Dandamudi <priyanka.dandamudi@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220713130209.2573233-2-priyanka.dandamudi@intel.com
|
|
Accidental use of a "SLICE" macro where a "SUBSLICE" macro was intended
causes the group ID for steering to be calculated incorrectly on
pre-Xe_HP platforms.
Fixes: 9a92732f040a ("drm/i915/gt: Add general DSS steering iterator to intel_gt_mcr")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712220513.3451794-1-matthew.d.roper@intel.com
|
|
Since segment_pages is no longer a compile time constant, it looks the
DIV_ROUND_UP(node->size, segment_pages) breaks the 32b build. Simplest
is just to use the ULL variant, but really we should need not need more
than u32 for the page alignment (also we are limited by that due to the
sg->length type), so also make it all u32.
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bc99f1209f19 ("drm/i915/ttm: fix sg_table construction")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220712174050.592550-1-matthew.auld@intel.com
|
|
On some machines hole_end can be small enough to cause subtraction
overflow. On the other side (addr + 2 * min_alignment) can overflow
in case of mock tests. This patch should handle both cases.
Fixes: e1c5f754067b59 ("drm/i915: Avoid overflow in computing pot_hole loop termination")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3674
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220624113528.2159210-1-andrzej.hajda@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
One impact of commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove
dma_resv workaround") is that it stores many, many more fences. Whereas
adding an exclusive fence used to remove the shared fence list, that
list is now preserved and the write fences included into the list. Not
just a single write fence, but now a write/read fence per context. That
causes us to have to track more fences than before (albeit half of those
are redundant), and we trigger more interrupts for multi-engine
workloads.
As part of reducing the impact from handling more signaling, we observe
we only need to kick the signal worker after adding a fence iff we have
good cause to believe that there is work to be done in processing the
fence i.e. we either need to enable the interrupt or the request is
already complete but we don't know if we saw the interrupt and so need
to check signaling.
References: 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/d7b953c7a4ba747c8196a164e2f8c5aef468d048.1657289332.git.karolina.drobnik@intel.com
|
|
In monitoring a transcode pipeline that is latency sensitive (it waits
between submitting frames, and each frame requires work on rcs/vcs/vecs
engines), it is found that it took longer than a single jiffy for it to
sustain its workload. Allowing an extra jiffy headroom for the userspace
prevents us from prematurely parking and having to exit powersaving
immediately.
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/6284
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e37911ec087a9ce50630d6faf61fa2c0d5f96d44.1657289332.git.karolina.drobnik@intel.com
|
|
We employ a "waitboost" heuristic to detect when userspace is stalled
waiting for results from earlier execution. Under latency sensitive work
mixed between the gpu/cpu, the GPU is typically under-utilised and so
RPS sees that low utilisation as a reason to downclock the frequency,
causing longer stalls and lower throughput. The user left waiting for
the results is not impressed.
On applying commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv
workaround") it was observed that deinterlacing h264 on Haswell
performance dropped by 2-5x. The reason being that the natural workload
was not intense enough to trigger RPS (using HW evaluation intervals) to
upclock, and so it was depending on waitboosting for the throughput.
Commit 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
changes the composition of dma-resv from keeping a single write fence +
multiple read fences, to a single array of multiple write and read
fences (a maximum of one pair of write/read fences per context). The
iteration order was also changed implicitly from all-read fences then
the single write fence, to a mix of write fences followed by read
fences. It is that ordering change that belied the fragility of
waitboosting.
Currently, a waitboost is inspected at the point of waiting on an
outstanding fence. If the GPU is backlogged such that we haven't yet
stated the request we need to wait on, we force the GPU to upclock until
the completion of that request. By changing the order in which we waited
upon requests, we ended up waiting on those requests in sequence and as
such we saw that each request was already started and so not a suitable
candidate for waitboosting.
Instead of asking whether to boost each fence in turn, we can look at
whether boosting is required for the dma-resv ensemble prior to waiting
on any fence, making the heuristic more robust to the order in which
fences are stored in the dma-resv.
Reported-by: Thomas Voegtle <tv@lio96.de>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6284
Fixes: 047a1b877ed4 ("dma-buf & drm/amdgpu: remove dma_resv workaround")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Karolina Drobnik <karolina.drobnik@intel.com>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07e05518d9f6620d20cc1101ec1849203fe973f9.1657289332.git.karolina.drobnik@intel.com
|
|
Avoid trying to invalidate the TLB in the middle of performing an
engine reset, as this may result in the reset timing out. Currently,
the TLB invalidate is only serialised by its own mutex, forgoing the
uncore lock, but we can take the uncore->lock as well to serialise
the mmio access, thereby serialising with the GDRST.
Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with
i915 selftest/hangcheck.
Cc: stable@vger.kernel.org # v4.4 and upper
Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store")
Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chris Wilson <chris.p.wilson@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1e59a7c45dd919a530256b9ac721ac6ea86c0677.1657639152.git.mchehab@kernel.org
|
|
Don't allow two engines to be reset in parallel, as they would both
try to select a reset bit (and send requests to common registers)
and wait on that register, at the same time. Serialize control of
the reset requests/acks using the uncore->lock, which will also ensure
that no other GT state changes at the same time as the actual reset.
Cc: stable@vger.kernel.org # v4.4 and upper
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e0a2d894e77aed7c2e36b0d1abdc7dbac3011729.1657639152.git.mchehab@kernel.org
|
|
This workaround may need to be extended to other platforms soon, but for
now it's marked as DG2-specific.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708215804.2889246-1-matthew.d.roper@intel.com
|
|
If we encounter some monster sized local-memory page that exceeds the
maximum sg length (UINT32_MAX), ensure that don't end up with some
misaligned address in the entry that follows, leading to fireworks
later. Also ensure we have some coverage of this in the selftests.
v2(Chris):
- Use round_down consistently to avoid udiv errors
v3(Nirmoy):
- Also update the max_segment in the selftest
Fixes: f701b16d4cc5 ("drm/i915/ttm: add i915_sg_from_buddy_resource")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6379
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Nirmoy Das <nirmoy.das@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220711085859.24198-1-matthew.auld@intel.com
|
|
The shmem_pin_map() function doesn't return error pointers, it returns
NULL.
Fixes: be1cb55a07bf ("drm/i915/gt: Keep a no-frills swappable copy of the default context state")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708094104.GL2316@kadam
|
|
Add Meteorlake PCI IDs. Split into M, and P subplatforms.
v2: Update PCI id's
v3: Move id 7d60 under MTL_M(MattR)
Bspec: 55420
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708000335.2869311-3-radhakrishna.sripada@intel.com
|
|
MTL has Xe_LPD+ display IP (version = 14), MTL graphics IP
(version = 12.70), and Xe_LPM+ media IP (version = 13).
Bspec: 55413
Bspec: 55416
Bspec: 55417
Bspec: 55418
Bspec: 55726
Bspec: 45544
Bspec: 65380
v2: rearrange the fields in pci_info(MattR)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[mattrope: Moved IS_METEORLAKE() higher in header]
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708000335.2869311-2-radhakrishna.sripada@intel.com
|
|
Although all DSS belong to a single pool on Xe_HP platforms (i.e.,
they're not organized into slices from a topology point of view), we do
still need to pass 'group' and 'instance' targets when steering register
accesses to a specific instance of a per-DSS multicast register. The
rules for how to determine group and instance IDs (which previously used
legacy terms "slice" and "subslice") varies by platform. Some platforms
determine steering by gslice membership, some platforms by cslice
membership, and future platforms may have other rules.
Since looping over each DSS and performing steered unicast register
accesses is a relatively common pattern, let's add a dedicated iteration
macro to handle this (and replace the platform-specific "instdone" loop
we were using previously. This will avoid the calling code needing to
figure out the details about how to obtain steering IDs for a specific
DSS.
Most of the places where we use this new loop are in the GPU errorstate
code at the moment, but we do have some additional features coming in
the future that will also need to loop over each DSS and steer some
register accesses accordingly.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220701232006.1016135-1-matthew.d.roper@intel.com
|
|
The global sseu config is applicable only to gen11 platforms where
concurrent media, render and OA use cases may cause some subslices to be
turned off and hence lose NOA configuration. Ideally we want to return
ENODEV for non-gen11 platforms, however, this has shipped with gfx12, so
disable only for gfx12.50+.
v2: gfx12 is already shipped with this, disable for gfx12.50+ (Lionel)
v3: (Matt)
- Update commit message and replace "12.5" with "12.50"
- Replace DRM_DEBUG() with driver specific drm_dbg()
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-2-umesh.nerlige.ramappa@intel.com
|
|
DRM_DEBUG is not the right debug call to use in i915 OA, replace it with
driver specific drm_dbg() call (Matt).
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707193002.2859653-1-umesh.nerlige.ramappa@intel.com
|
|
Since we are not holding a wakeref, shrinking a bound object is not
guaranteed.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6370
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220706154738.235204-1-matthew.auld@intel.com
|
|
Both error-capture and relay-logging mechanism use the GuC
log infrastructure. That means the KMD must send a log flush
complete notification back to GuC after reading the data out.
This call is currently being sent synchronously.
However, synchronous H2Gs cause problems when the system is
backed up. There is no need for this to be synchronous. The
KMD wasn't even looking at the return status from it. So make
it asynchronous and then there is no issue about time outs.
Signed-off-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220607002314.1451656-2-alan.previn.teres.alexis@intel.com
|
|
In vma destruction, the following race may occur:
Thread 1: Thread 2:
i915_vma_destroy();
...
list_del_init(vma->vm_link);
...
mutex_unlock(vma->vm->mutex);
__i915_vm_release();
release_references();
And in release_reference() we dereference vma->vm to get to the
vm gt pointer, leading to a use-after free.
However, __i915_vm_release() grabs the vm->mutex so the vm won't be
destroyed before vma->vm->mutex is released, so extract the gt pointer
under the vm->mutex to avoid the vma->vm dereference in
release_references().
v2: Fix a typo in the commit message (Andi Shyti)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5944
Fixes: e1a7ab4fca0c ("drm/i915: Remove the vm open count")
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.con>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220620123659.381772-1-thomas.hellstrom@linux.intel.com
|
Akeem G Abodunrin
Matt Roper
Matthew Auld
Andrzej Hajda
Chris Wilson
Chris Wilson
Dan Carpenter
Radhakrishna Sripada
Umesh Nerlige Ramappa
Alan Previn
Thomas Hellström