aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-02-03nfs: introduce pg_cleanup op for pgio descriptorsWeston Andros Adamson2-1/+5
Add a new operation to nfs_pageio_ops that is called on nfs_pageio_complete. Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
2015-02-03nfs/filelayout: use pnfs_error_mark_layout_for_returnPeng Tao2-11/+1
Instead of calling layoutreturn directly, call pnfs_error_mark_layout_for_return to mark layouts for return and let generic code return layout when layout segments are freed. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com> Conflicts: fs/nfs/filelayout/filelayout.c
2015-02-03nfs41: clear NFS_LAYOUT_RETURN if layoutreturn is sent or failed to sendPeng Tao2-0/+6
So that pnfs path is not disabled for ever. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: send layoutreturn in last put_lsegPeng Tao1-1/+37
If current lseg is the last lseg marked with NFS_LSEG_LAYOUTRETURN, send layoutreturn. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: don't use a layout if it is marked for returningPeng Tao3-5/+20
And if we are to return the same type of layouts, don't bother sending more layoutgets. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: add a helper to mark layout for returnPeng Tao2-0/+59
It marks all matching layout segments as NFS_LSEG_LAYOUTRETURN, which is an indicator for pnfs_put_lseg() to send layoutreturn, and also prevents pnfs_update_layout() from using the returning segments. Once it is set, it never gets cleared. It also sets proper io failure bit so that pnfs path can be retried after PNFS_LAYOUTGET_RETRY_TIMEOUT second. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: make a helper function to send layoutreturnPeng Tao1-20/+33
It allows to specify different iomode to return. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: pass iomode through layoutreturn argsPeng Tao3-1/+3
So that it is possible to return a specific iomode layouts. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs: save server READ/WRITE/COMMIT statusPeng Tao4-3/+15
Flexfiles layout would want to use them to report DS IO status. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: serialize first layoutget of a filePeng Tao2-4/+32
Per RFC 5661 Errata 3208: | A client MAY always forget its layout state and associated | layout stateid at any time (See also section 12.5.5.1). | In such case, the client MUST use a non-layout stateid for the next | LAYOUTGET operation. This will signal the server that the client has | no more layouts on the file and its respective layout state can be | released before issuing a new layout in response to LAYOUTGET. In order to make such a signal unique to server, client needs to serialize all layoutgets using non-layout stateid. We implement this by serializing layoutgets when client has no layout segments at hand. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: close a small race window when adding new layout to global listPeng Tao1-5/+3
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs/flexclient: export pnfs_layoutcommit_inodePeng Tao1-0/+1
flexfiles needs to start layoutcommit when necessary Signed-off-by: Peng Tao <tao.peng@primarydata.com>
2015-02-03nfs: set hostname when creating nfsv3 ds connectionPeng Tao1-0/+7
lockd assumes hostname exists otherwise kernel oops. It can be reproduced by following steps: 1. mount flexfile MDS 2. write some files 3. mount DS via nfsv3 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8134f332>] strlen+0x2/0x20 PGD 0 Oops: 0000 [#1] SMP Modules linked in: nfsd(F) nfs_layout_flexfiles(F) rpcsec_gss_krb5(F) auth_rpcgss(F) nfsv4(F) dns_resolver(F) nfsv3(F) nfs_acl(F) nfs(F) lockd(F) sunrpc(F) fscache(F) ebtable_nat(F) nf_conntrack_netbios_ns(F) nf_conntrack_broadcast(F) ipt_MASQUERADE(F) ip6table_nat(F) nf_nat_ipv6(F) ip6table_mangle(F) ip6t_REJECT(F) nf_conntrack_ipv6(F) nf_defrag_ipv6(F) iptable_nat(F) nf_nat_ipv4(F) nf_nat(F) iptable_mangle(F) nf_conntrack_ipv4(F) nf_defrag_ipv4(F) xt_conntrack(F) nf_conntrack(F) ebtable_filter(F) ebtables(F) ip6table_filter(F) ip6_tables(F) bnep(F) snd_ens1371(F) snd_rawmidi(F) snd_ac97_codec(F) btusb(F) ac97_bus(F) snd_seq(F) snd_seq_device(F) snd_pcm(F) ppdev(F) bluetooth(F) 6lowpan_iphc(F) rfkill(F) vmw_balloon(F) snd_timer(F) snd(F) soundcore(F) gameport(F) i2c_piix4(F) e1000(F) vmw_vmci(F) parport_pc(F) parport(F) shpchp(F) uinput(F) xfs(F) libcrc32c(F) vmwgfx(F) ttm(F) drm(F) mptspi(F) scsi_transport_spi(F) mptscsih(F) mptbase(F) i2c_core(F) CPU: 0 PID: 10397 Comm: mount.nfs Tainted: GF 3.14.7-100.pd_client.001.fc16.x86_64 #1 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013 task: ffff880008942600 ti: ffff880007990000 task.ti: ffff880007990000 RIP: 0010:[<ffffffff8134f332>] [<ffffffff8134f332>] strlen+0x2/0x20 RSP: 0018:ffff880007991aa0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff880038d39c20 RCX: 0000000000000004 RDX: 0000000000000006 RSI: 0000000000000010 RDI: 0000000000000000 RBP: ffff880007991b38 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000014600 R11: 0000000000000400 R12: ffffffff81cc8580 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000004 FS: 00007f90cd2ef880(0000) GS:ffff88003f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000001710000 CR4: 00000000001407f0 Stack: ffffffffa045f52c ffff880001782230 ffff880004141e28 0006880007991ac8 ffffffff816dc14b ffff880000000000 ffff880038d39c20 0000000000000010 0000000481cc0006 0000000000000000 ffffffffa0410be8 000000000000c014 Call Trace: [<ffffffffa045f52c>] ? nlmclnt_lookup_host+0x4c/0x2c0 [lockd] [<ffffffff816dc14b>] ? _raw_spin_unlock_bh+0x1b/0x20 [<ffffffffa0410be8>] ? svc_destroy+0xb8/0x140 [sunrpc] [<ffffffffa045c323>] nlmclnt_init+0x53/0xc0 [lockd] [<ffffffffa047d2dc>] ? nfs_get_client+0x1cc/0x340 [nfs] [<ffffffffa047c2e7>] nfs_start_lockd+0xa7/0xd0 [nfs] [<ffffffffa047df71>] nfs_create_server+0x181/0x5c0 [nfs] [<ffffffffa04460f3>] nfs3_create_server+0x13/0x30 [nfsv3] [<ffffffffa048a0bc>] nfs_try_mount+0x21c/0x300 [nfs] [<ffffffff811ca32d>] ? __kmalloc_track_caller+0x1ad/0x240 [<ffffffffa048b677>] ? nfs_fs_mount+0xc37/0xd80 [nfs] [<ffffffffa048ad05>] nfs_fs_mount+0x2c5/0xd80 [nfs] [<ffffffffa048a830>] ? nfs_clone_super+0x140/0x140 [nfs] [<ffffffffa048a240>] ? nfs_clone_sb_security+0x40/0x40 [nfs] [<ffffffff811e7e43>] mount_fs+0x43/0x1b0 [<ffffffff81193100>] ? __alloc_percpu+0x10/0x20 [<ffffffff812026e6>] vfs_kern_mount+0x76/0x120 [<ffffffff81204917>] do_mount+0x237/0xa80 Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-03sunrpc: add rpc_count_iostats_idxWeston Andros Adamson2-7/+21
Add a call to tally stats for a task under a different statsidx than what's contained in the task structure. This is needed to properly account for pnfs reads/writes when the DS nfs version != the MDS version. Signed-off-by: Weston Andros Adamson <dros@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03NFSv4.1/NFSv3: Add pNFS callbacks for nfs3_(read|write|commit)_done()Trond Myklebust1-0/+9
Enable pNFS callbacks to allow flex files to work correctly with a NFSv3-enabled data server. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-02-03nfs: allow to specify cred in nfs_initiate_pgioPeng Tao3-11/+14
so that flexfile layout client can pass in DS credential instead of using user cred, which will be done in the next patch. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs4: export nfs4_sequence_donePeng Tao2-4/+7
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs4: pass slot table to nfs40_setup_sequencePeng Tao2-11/+17
flexclient needs this as there is no nfs_server to DS connection. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs: allow different protocol in nfs_initiate_commitPeng Tao4-4/+7
pnfs flexfile layout client may want to use NFSv3 ops rather than the default MDS v4 ops. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03pnfs: Add nfs_rpc_ops in calls to nfs_initiate_pgioTom Haynes6-8/+13
Signed-off-by: Tom Haynes <loghyr@primarydata.com>
2015-02-03nfs41: create NFSv3 DS connection if specifiedPeng Tao3-5/+93
Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: allow LD to choose DS connection version/minor_versionPeng Tao5-8/+14
flexfile layout may need to set such when making DS connections. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfsv3: introduce nfs3_set_ds_clientPeng Tao5-5/+46
The flexfiles layout wants to create DS connection over NFSv3. Add nfs3_set_ds_client to allow that to happen. Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: move file layout macros to generic pnfsPeng Tao2-10/+11
They can be reused by flexfile layout as well. Also add a code such that if read fails on one DS and there are other DSes available to use, don't resend through MDS but through pNFS so that client can read from other DSes. Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: allow LD to choose DS connection auth flavorPeng Tao5-9/+14
flexfile layout may use different auth flavor as specified by MDS. Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: pull nfs4_ds_connect from file layout to generic pnfsPeng Tao3-73/+89
It can be reused by flexfiles layout client. Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: pull decode_ds_addr from file layout to generic pnfsPeng Tao3-150/+154
It can be reused by flexfile layout. Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03nfs41: pull data server cache from file layout to generic pnfsPeng Tao4-252/+265
Also pull nfs4_pnfs_ds_addr and nfs4_pnfs_ds to generic pnfs. They can all be reused by flexfile layout as well. Reviewed-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Peng Tao <tao.peng@primarydata.com> Signed-off-by: Tom Haynes <Thomas.Haynes@primarydata.com>
2015-02-03pnfs: Do not grab the commit_info lock twice when rescheduling writesTom Haynes3-26/+23
Acked-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Tom Haynes <loghyr@primarydata.com>
2015-02-03pnfs: Prepare for flexfiles by pulling out common codeTom Haynes6-290/+330
The flexfilelayout driver will share some common code with the filelayout driver. This set of changes refactors that common code out to avoid any module depenencies. Signed-off-by: Tom Haynes <loghyr@primarydata.com>
2015-01-18Linux 3.19-rc5Linus Torvalds1-1/+1
2015-01-17clk: fix possible null pointer dereferenceStanimir Varbanov1-1/+1
The commit 646cafc6 (clk: Change clk_ops->determine_rate to return a clk_hw as the best parent) opens a possibility for null pointer dereference, fix this. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-17Revert "clk: ppc-corenet: Fix Section mismatch warning"Kevin Hao1-1/+1
This reverts commit da788acb28386aa896224e784954bb73c99ff26c. That commit tried to fix the section mismatch warning by moving the ppc_corenet_clk_driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-17clk: rockchip: fix deadlock possibility in cpuclkHeiko Stübner1-4/+6
Lockdep reported a possible deadlock between the cpuclk lock and for example the i2c driver. CPU0 CPU1 ---- ---- lock(clk_lock); local_irq_disable(); lock(&(&i2c->lock)->rlock); lock(clk_lock); <Interrupt> lock(&(&i2c->lock)->rlock); *** DEADLOCK *** The generic clock-types of the core ccf already use spin_lock_irqsave when touching clock registers, so do the same for the cpuclk. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: removed initialization of "flags"]
2015-01-16reset: sunxi: fix spinlock initializationTyler Baker1-0/+4
Call spin_lock_init() before the spinlocks are used, both in early init and probe functions preventing a lockdep splat. I have been observing lockdep complaining [1] during boot on my a80 optimus [2] when CONFIG_PROVE_LOCKING has been enabled. This patch resolves the splat, and has been tested on a few other sunxi platforms without issue. [1] http://storage.kernelci.org/next/next-20150107/arm-multi_v7_defconfig+CONFIG_PROVE_LOCKING=y/lab-tbaker/boot-sun9i-a80-optimus.html [2] http://kernelci.org/boot/?a80-optimus Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Cc: <stable@vger.kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-16ARM: dts: disable CCI on exynos5420 based arndale-octaAbhilash Kesavan2-1/+5
The arndale-octa board was giving "imprecise external aborts" during boot-up with MCPM enabled. CCI enablement of the boot cluster was found to be the cause of these aborts (possibly because the secure f/w was not allowing it). Hence, disable CCI for the arndale-octa board. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Tested-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Tyler Baker <tyler.baker@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-16drivers: bus: check cci device tree node statusAbhilash Kesavan1-0/+3
The arm-cci driver completes the probe sequence even if the cci node is marked as disabled. Add a check in the driver to honour the cci status in the device tree. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Tested-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-16ARM: rockchip: disable jtag/sdmmc autoswitching on rk3288Heiko Stübner1-0/+27
rk3288 SoCs have a function to automatically switch between jtag/sdmmc pinmux settings depending on the card state. This collides with a lot of assumptions. It only works when using the internal card-detect mechanism and breaks horribly when using either the normal card-detect via the slot-gpio function or via any other pin. Also there is of course no link between the mmc and jtag on the software-side, so the jtag clocks may very well be disabled when the card is ejected and the soc switches back to the jtag pinmux. Leaving the switching function enabled did result in mmc timeouts and rcu stalls thus hanging the system on 3.19-rc1. Therefore disable it in all cases, as we expect the devicetree to explicitly select either mmc or jtag pinmuxes anyway. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-16ARM: nomadik: fix up leftover device tree pinsLinus Walleij1-4/+4
We altered the device tree bindings for the Nomadik family of pin controllers to be standard, this file was merged out-of-order so we missed fixing this. Fix it up. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-01-17kernel: avoid overflow in cmp_rangeLouis Langholtz1-5/+5
Avoid overflow possibility. [ The overflow is purely theoretical, since this is used for memory ranges that aren't even close to using the full 64 bits, but this is the right thing to do regardless. - Linus ] Signed-off-by: Louis Langholtz <lou_langholtz@me.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Peter Anvin <hpa@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-16perf tools powerpc: Use dwfl_report_elf() instead of offline.Sukadev Bhattiprolu1-8/+11
dwfl_report_offline() works only when libraries are prelinked. Replace dwfl_report_offline() with dwfl_report_elf() so we correctly extract debug info even from libraries that are not prelinked. Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Link: http://lkml.kernel.org/r/20150114221045.GA17703@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Fix segfault for symbol annotation on TUINamhyung Kim1-7/+1
Currently the symbol structure is allocated with symbol_conf.priv_size to carry sideband information like annotation, map browser on TUI and sort-by-name tree node. So retrieving these information from symbol needs to care about the details of such placement. However the annotation code just assumes that the symbol is placed after the struct annotation. But actually there's other info between them. So accessing those struct will lead to an undefined behavior (usually a crash) after they write their info to the same location. To reproduce the problem, please follow the steps below: 1. run perf report (TUI of course) with -v option 2. open map browser (by pressing right arrow key for any entry) 3. search any function (by pressing '/' key and input whatever..) 4. return to the hist browser (by pressing 'q' or left arrow key) 5. open annotation window for the same entry (by pressing 'a' key) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf test: Fix dwarf unwind using libunwind.Wang Nan2-3/+61
Perf tool fails to unwind user stack if the event raises in a shared object. This patch improves tests/dwarf-unwind.c to demonstrate the problem by utilizing commonly used glibc function "bsearch". If perf is not statically linked, the testcase will try to unwind a mixed call trace. By debugging libunwind I found that there is a bug in unwind-libunwind: it always passes 0 as segbase to libunwind, cause libunwind unable to locate debug_frame entry fir first level ip address (I add some more debugging output into libunwind to make things clear): >_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4 >_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388 >_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc >lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc) ... >lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc) >_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found >put_rs_cache: unmasking signals/interrupts and releasing lock >_Uarm_dwarf_step: returning -10 >_Uarm_step: dwarf_step()=-10 This patch passes map->start as segbase to dwarf_find_debug_frame(), so di will be initialized correctly. In addition, dso and executable are different when setting segbase. This patch first check whether the elf is executable, and pass segbase only for shared object. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Avoid build splat for syscall numbers with uclibcVineet Gupta3-3/+1
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers) Also seen on ARM uClibc based tools ------- ARC build ---------->8------------- CC util/evlist.o In file included from ~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0, from util/../perf-sys.h:10, from util/../perf.h:15, from util/event.h:7, from util/event.c:3: ~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0: warning: "__NR_fcntl64" redefined [enabled by default] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0, from util/../perf-sys.h:6, ----------------->8------------------- ------- ARM build ---------->8------------- CC FPIC plugin_scsi.o In file included from util/../perf-sys.h:9:0, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0: warning: "__NR_restart_syscall" redefined [enabled by default] In file included from ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0, from util/../perf-sys.h:6, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0: note: this is the location of the previous definition ----------------->8------------------- Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Elide strlcpy warning with uclibcVineet Gupta1-0/+2
----------------->8------------------ CC bench/sched-pipe.o In file included from builtin-annotate.c:13:0: util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy' [-Wredundant-decls] extern size_t strlcpy(char *dest, const char *src, size_t size); ^ In file included from util/util.h:55:0, from builtin.h:4, from builtin-annotate.c:8: ~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15: note: previous declaration of 'strlcpy' was here extern size_t strlcpy(char *__restrict dst, const char *__restrict src, ----------------->8------------------ Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-3-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Fix statfs.f_type data type mismatch build error with uclibcAlexey Brodkin2-2/+2
ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers statfs defines f_type to be U32 which causes perf build breakage http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h ----------->8--------------- CC fs/fs.o fs/fs.c: In function 'fs__valid_mount': fs/fs.c:82:24: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] else if (st_fs.f_type != magic) ^ cc1: all warnings being treated as errors ----------->8--------------- Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Cody P Schafer <dev@codyps.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Link: http://lkml.kernel.org/r/1420888254-17504-2-git-send-email-vgupta@synopsys.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16tools: Remove bitops/hweight usage of bits in tools/perfArnaldo Carvalho de Melo10-42/+30
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c, so tools need to link hweight.o. For now do it directly, but we need to have a tools/lib/lk.a or .so that collects these goodies... Reported-by: Jan Beulich <JBeulich@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf machine: Fix __machine__findnew_thread() error pathNamhyung Kim1-1/+3
When thread__init_map_groups() fails, a new thread should be removed from the rbtree since it's gonna be freed. Also update last match cache only if the function succeeded. Reported-by: David Ahern <dsahern@gmail.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420763892-15535-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf tools: Fix building error in x86_64 when dwarf unwind is onNamhyung Kim3-15/+17
When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com [ Namhyung provided his S-o-B on a followup to this patch thread on lkml ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-16perf probe: Propagate error code when write(2) failedNamhyung Kim1-1/+3
When it failed to write probe commands to the probe_event file in debugfs, it needs to propagate the error code properly. Current code blindly uses the return value of the write(2) so it always uses -1 (-EPERM) and it might confuse users. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.