| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
These were removed last year in commit 721da5cee9d4 ("driver core:
remove CONFIG_SYSFS_DEPRECATED and CONFIG_SYSFS_DEPRECATED_V2"),
so remove the last references to them in arm config files.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As part of general housekeeping, change the defconfig files to
sort lines based on the 'make savedefconfig' output, to make
it easier to do additional changes on top.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A number of options got reorganized over time wihtin Kconfig, so make sure
everything is where it belongs in order to simplify defconfig changes
again in the future.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The STM32 systems have a mailbox used for communication with non-Linux
processors like the M4 on the STM32MP157A. Enable the driver for the
mailbox so it is available for testing.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240107-arm-defconfig-stm32-ipcc-v1-1-924721db5661@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With the camera clock controller added to the DeviceTree of SC8280XP the
interconnect providers no longer reaches sync_state, resulting in a
noticeable reduction in battery life.
Enable the camera clock controller (as a module) to avoid this, and
hopefully soon provide some level of camera support.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231221-enable-sc8280xp-camcc-v1-1-2249581dd538@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
These allow user-space programs to create RPMSG endpoints and have
those endpoints show up as device files. They are enabled in the
ARM64 defconfig and are useful for the same reasons here.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enables support of STM32 DCMIPP V4L2 media driver.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: https://lore.kernel.org/r/20231215100656.729094-1-alexandre.torgue@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable GPU Clock Controller for SM8450 and SM8550 to allow using
Adreno GPU on these SoCs.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20231218-topic-sm8x50-upstream-gpucc-defconfig-v2-1-e5892470a10b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable GCC, Pinctrl and Interconnect configs for Qualcomm's X1E80100 SoC
which is required to boot X1E80100 QCP/CRD boards to a console shell. The
configs are required to be marked as builtin and not modules due to the
console driver dependencies.
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231205062403.14848-6-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the Qualcomm WSA884x driver, used speakers on boards with
Qualcomm SM8550 like QRD8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231106073048.24553-1-krzysztof.kozlowski@linaro.org
[bjorn: Rebased on Johan's patch adding SC8280XP and WSA883x, rewrote commit message]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the Qualcomm QSEECOM interface driver and the UEFI Secure
Application client driver which are needed to access EFI variables on
machines like the Lenovo ThinkPad X13s.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231012080157.4616-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the Qualcomm sc8280xp machine driver and the wsa833x speaker
codec driver that are needed for sound on machines like the Lenovo
ThinkPad X13s.
Note that the wcd938x headphone codec driver is currently implicitly
enabled as it is selected by the sc7280 machine driver.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231012080157.4616-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable global clock controller and pinctrl for support the Qualcomm
SM4450 platform to boot to UART console.
The serial engine depends on some global clock controller and pinctrl, but
as the serial console driver is only available as built-in, so the global
clock controller and pinctrl also needs be built-in for the UART device to
probe and register the console.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-7-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable the PowerVR DRM driver, as it's used for the GPU in platforms
using the TI AM62x SoCs, such as the TI SK-AM62 and BeaglePlay (2023).
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Acked-by: Darren Etheridge <detheridge@ti.com>
Link: https://lore.kernel.org/r/2f6af3ebfe9e36c80c03de2dcc2e940dd5dc2c4b.1701773390.git.donald.robson@imgtec.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Enable missing configs needed to boot the MT8195-Cherry-Tomato
Chromebook with full support on the defconfig.
The configs enabled bring in support for the DSP and sound card,
display, thermal sensor and keyboard backlight.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231122181335.535498-1-nfraprado@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Mediatek mt8173 board fails to boot with DA9211 regulator disabled.
Enabling CONFIG_REGULATOR_DA9211=y in drm-ci fixes the issue.
So enable it in the defconfig since kernel-ci also requires it.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230911104139.617448-1-vignesh.raman@collabora.com
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
|
|
Enable Clocks, Pinctrl and Interconnect drivers in the ARM64
defconfig for the Qualcomm SM8650 SoC to boot the SM8650 MTP
(Mobile Test Platform) and QRD (Qualcomm Reference Device) boards.
TCSRCC, GCC, Interconnect, and Pinctrl config are marked as builtin and
not modules due to boot dependencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231121-topic-sm8650-upstream-defconfig-v1-1-2500565fc21b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Enable Global Clock controller, pinctrl and interconnect framework
support for Qualcomm's SDX75 SoC which is required to boot to
console on sdx75-idp platform.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117055849.534671-1-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
SCMI reset controllers are used in the ARMv7 STMicroelectronics stm32mp
boards:
- for STM32MP13: stm32mp135f-dk
- for STM32MP15 boards with SCMI variant, introduced by commit 5b7e58313a77
("ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)")
* stm32mp157c-ev1-scmi
* stm32mp157c-ed1-scmi
* stm32mp157c-dk2-scmi
* stm32mp157a-dk1-scmi
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Link: https://lore.kernel.org/r/20231103085400.2924282-1-etienne.carriere@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
AM62 and other K3 based SoCs use Cadence DPHY and CSI-RX bridge
drivers, along with a DMA wrapper CSI IP for the camera pipeline.
Enable the same to get camera functionality on AM62x-SK, BeaglePlay and
AM62Ax SK among other platforms.
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231201-csi_dts-v3-1-9f06f31080fe@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Increase CONFIG_SERIAL_8250_NR_UARTS from 4 to 8, the current legacy value
is not adequate for embedded systems that use SoCs where it's common to
have a large number of serial ports.
No need to change CONFIG_SERIAL_8250_RUNTIME_UARTS, see commit 9d86719f8769
("serial: 8250: Allow using ports higher than SERIAL_8250_RUNTIME_UARTS").
The need to increase this value was noticed while working with Toradex
Verdin AM62, this board has 4 serial UART instances available to the user
plus an internal one that is connected to a Bluetooth module. Without this
change the fifth UART connected to the BT module is not instantiated and BT
is not working.
Instead of increasing the number to the bare minimum (5) that would be
required to solve this specific issue, we increase this to 8 which seems a
more reasonable number to have in the defconfig and should cover more valid
use cases.
With this change the kernel image size increases by ~3.2kB. bloat-o-meter
summary: add/remove: 1/1 grow/shrink: 7/0 up/down: 3220/-8 (3212)
Cc: Tony Lindgren <tony@atomide.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Francesco Dolcini <francesco@dolcini.it>
Link: https://lore.kernel.org/r/20231201195732.4931-1-francesco@dolcini.it
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
The Programmable Real-time Unit and Industrial Communication Subsystem
Gigabit (PRU_ICSSG) is a low-latency microcontroller subsystem in the TI
K3 SoCs such as AM654x, AM64x. This subsystem is provided for the use
cases like implementation of custom peripheral interfaces, offloading of
tasks from the other processor cores of the SoC, etc.
Currently AM654x-EVM uses ICSSG driver.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20231128084537.3946895-1-danishanwar@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Siemens' SIMATIC IOT2050 platform[0], based on Texas Instruments'
AM65x SoC[1], uses Toshiba TC358767[2] to convert DPI video to
DisplayPort (DP) video output. The original DPI signals are generated
by AM65x's Display SubSystem (DSS).
Toshiba TC358767 is also capable of other video format conversions, viz,
DPI to (e)DP, DSI to (e)DP, and DSI to DPI.
Enable the video bridge Toshiba TC358767.
[0]: https://www.siemens.com/global/en/products/automation/pc-based/iot-gateways/simatic-iot2050.html
[1]: https://www.ti.com/product/AM6548
[2]: https://toshiba.semicon-storage.com/info/datasheet_en_20230731.pdf?did=36657
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Link: https://lore.kernel.org/r/20231030152834.18450-1-a-bhatia1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Enable all available I2C drivers needed for the Epson Moverio BT200,
that are:
- LED
- Subdevs of the TWL6032 PMIC
- IMU sensors
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Message-ID: <20231120215635.4187399-1-andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
Refresh the defconfig for Renesas ARM systems:
- Disable CONFIG_SERIAL_8250_EXAR (auto-enabled since commit
5939ff7ffae095ac ("tty: serial: 8250_exar: Does not use anything
from 8250_pci")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/b9bdb0fe3635a7eb51a7eca9a06e8146d6ad82db.1700667824.git.geert+renesas@glider.be
|
|
The Renesas Ethernet AVB driver is used by various iWave RZ/G1
development boards.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120070024.4079344-15-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable the config for the Renesas VersaClock 3 programmable clock
generator, as it is populated on RZ/{G2L,G2LC} and RZ/V2L SMARC EVKs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230824083006.88944-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
|
|
Enable GENERIC_BUG_RELATIVE_POINTERS which will store 32-bit relative
offsets to the bug address and the source file name instead of 64-bit
absolute addresses. This effectively reduces the size of the
bug_table[] array by half on 64-bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Those return codes are only defined for the parisc architecture and
are leftovers from when we wanted to be HP-UX compatible.
They are not returned by any Linux kernel syscall but do trigger
problems with the glibc strerrorname_np() and strerror() functions as
reported in glibc issue #31080.
There is no need to keep them, so simply remove them.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Bruno Haible <bruno@clisp.org>
Closes: https://sourceware.org/bugzilla/show_bug.cgi?id=31080
Cc: stable@vger.kernel.org
|
|
Make sure that the __bug_table section gets 32- or 64-bit aligned,
depending if a 32- or 64-bit kernel is being built.
Mark it non-writeable and use .blockz instead of the .org assembler
directive to pad the struct.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Make sure the .PARISC.unwind section will be 32-bit aligned.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
On parisc we need 16-byte alignment for variables which are used for
locking. Mark the __lock_aligned attribute acordingly so that the
.data..lock_aligned section will get that alignment in the generated
object files.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
The jump_table stores two 32-bit words and one 32- (on 32-bit kernel)
or one 64-bit word (on 64-bit kernel).
Ensure that the last word is always 64-bit aligned on a 64-bit kernel
by aligning the whole structure on sizeof(long).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Add an align statement to tell the linker that all ex_table entries and as
such the whole ex_table section should be 32-bit aligned in vmlinux and modules.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # v6.0+
|
|
Mark a superblock that is for for an R/O or Backup volume as SB_RDONLY when
mounting it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
AFS doesn't really do locking on R/O volumes as fileservers don't maintain
state with each other and thus a lock on a R/O volume file on one
fileserver will not be be visible to someone looking at the same file on
another fileserver.
Further, the server may return an error if you try it.
Fix this by doing what other AFS clients do and handle filelocking on R/O
volume files entirely within the client and don't touch the server.
Fixes: 6c6c1d63c243 ("afs: Provide mount-time configurable byte-range file locking emulation")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or
cellservdb config file record) can be found rather than returning
EDESTADDRREQ.
Also add cell name lookup info to the cursor dump.
Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Kent reported an occasional KASAN splat in lockdep. Mark then noted:
> I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4
> bytes of the redzone and gets (incorrectly/misleadingly) attributed to
> nr_large_chain_blocks.
That would mean @size == 0, at which point size_to_bucket() returns -1
and the above happens.
alloc_chain_hlocks() has 'size - req', for the first with the
precondition 'size >= rq', which allows the 0.
This code is trying to split a block, del_chain_block() takes what we
need, and add_chain_block() puts back the remainder, except in the
above case the remainder is 0 sized and things go sideways.
Fixes: 810507fe6fd5 ("locking/lockdep: Reuse freed chain_hlocks entries")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lkml.kernel.org/r/20231121114126.GH8262@noisy.programming.kicks-ass.net
|
|
A common issue in Makefile is a race in parallel building.
You need to be careful to prevent multiple threads from writing to the
same file simultaneously.
Commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not
generate invalid images") addressed such a bad scenario.
A similar symptom occurs with the following command:
$ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/arm64/boot/Image
OBJCOPY arch/arm64/boot/Image
AS arch/arm64/boot/zboot-header.o
PAD arch/arm64/boot/vmlinux.bin
GZIP arch/arm64/boot/vmlinuz
OBJCOPY arch/arm64/boot/vmlinuz.o
LD arch/arm64/boot/vmlinuz.efi.elf
OBJCOPY arch/arm64/boot/vmlinuz.efi
The log "OBJCOPY arch/arm64/boot/Image" is displayed twice.
It indicates that two threads simultaneously enter arch/arm64/boot/
and write to arch/arm64/boot/Image.
It occasionally leads to a build failure:
$ make -j$(nproc) ARCH=arm64 Image vmlinuz.efi
[ snip ]
SORTTAB vmlinux
OBJCOPY arch/arm64/boot/Image
PAD arch/arm64/boot/vmlinux.bin
truncate: Invalid number: 'arch/arm64/boot/vmlinux.bin'
make[2]: *** [drivers/firmware/efi/libstub/Makefile.zboot:13:
arch/arm64/boot/vmlinux.bin] Error 1
make[2]: *** Deleting file 'arch/arm64/boot/vmlinux.bin'
make[1]: *** [arch/arm64/Makefile:163: vmlinuz.efi] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:234: __sub-make] Error 2
vmlinuz.efi depends on Image, but such a dependency is not specified
in arch/arm64/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: SImon Glass <sjg@chromium.org>
Link: https://lore.kernel.org/r/20231119053234.2367621-1-masahiroy@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Remove duplicate code and add new helper for creating special files in
SFU (Services for UNIX) format that can be shared by SMB1+ code.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Handle all file types in NFS reparse points as specified in MS-FSCC
2.1.2.6 Network File System (NFS) Reparse Data Buffer.
The client is now able to set all file types based on the parsed NFS
reparse point, which used to support only symlinks. This works for
SMB1+.
Before patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
ls: cannot access 'block': Operation not supported
ls: cannot access 'char': Operation not supported
ls: cannot access 'fifo': Operation not supported
ls: cannot access 'sock': Operation not supported
total 1
l????????? ? ? ? ? ? block
l????????? ? ? ? ? ? char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
l????????? ? ? ? ? ? fifo
l--------- 1 root root 0 Nov 18 23:23 link -> f0
l????????? ? ? ? ? ? sock
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
total 1
brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block
crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo
lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0
srwxr-xr-x 1 root root 0 Nov 19 2023 sock
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Parse reparse point into cifs_open_info_data structure and feed it
through cifs_open_info_to_fattr().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Reparse points are not limited to symlinks, so implement
->query_reparse_point() in order to handle different file types.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
We were deferencing iface after it has been released. Fix is to
release after all dereference instances have been encountered.
Signed-off-by: Ritvik Budhiraja <rbudhiraja@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311110815.UJaeU3Tt-lkp@intel.com/
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Update the USB serial option driver support for Luat Air72*U series
products.
ID 1782:4e00 Spreadtrum Communications Inc. UNISOC-8910
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1782 ProdID=4e00 Rev=00.00
S: Manufacturer=UNISOC
S: Product=UNISOC-8910
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
If#= 2: AT
If#= 3: PPP + AT
If#= 4: Debug
Co-developed-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Signed-off-by: Asuna Yang <SpriteOvO@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
We don't support CRUD-inspired message types in YNL too well.
One aspect that currently trips us up is the fact that single
message ID can be used in multiple commands (as the response).
This leads to duplicate entries in the id-to-string tables:
devlink-user.c:19:34: warning: initialized field overwritten [-Woverride-init]
19 | [DEVLINK_CMD_PORT_NEW] = "port-new",
| ^~~~~~~~~~
devlink-user.c:19:34: note: (near initialization for ‘devlink_op_strmap[7]’)
Fixes tag points at where the code was generated, the "real" problem
is that the code generator does not support CRUD.
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Link: https://lore.kernel.org/r/20231123030558.1611831-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The makefile dependency is trying to include the wrong header:
<command-line>: fatal error: ../../../../include/uapi//linux/nfsd.h: No such file or directory
The guard also looks wrong.
Fixes: f14122b2c2ac ("tools: ynl: Add source files for nfsd netlink protocol")
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20231123030624.1611925-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Arnd Bergmann
Mark Brown
Bjorn Andersson
Andrew Davis
Hugues Fruchet
Neil Armstrong
Rajendra Nayak
Krzysztof Kozlowski
Johan Hovold
Tengfei Fan
Donald Robson
Nícolas F. R. A. Prado
Vignesh Raman
Rohit Agarwal
Etienne Carriere
Jai Luthra
Francesco Dolcini
MD Danish Anwar
Aradhya Bhatia
Andreas Kemnade
Geert Uytterhoeven
Claudiu Beznea
Biju Das
Linus Torvalds
Helge Deller
David Howells
Peter Zijlstra
Masahiro Yamada
Paulo Alcantara
Ritvik Budhiraja
Asuna Yang
Jakub Kicinski