aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-26f2fs: read page index before freeingPan Bian1-1/+3
The function truncate_node frees the page with f2fs_put_page. However, the page index is read after that. So, the patch reads the index before freeing the page. Fixes: bf39c00a9a7f ("f2fs: drop obsolete node page when it is truncated") Cc: <stable@vger.kernel.org> Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: fix wrong return value of f2fs_acl_createTiezhu Yang1-6/+8
When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create() should return -EIO instead of -ENOMEM, this patch makes it consistent with posix_acl_create() which has been fixed in commit beaf226b863a ("posix_acl: don't ignore return value of posix_acl_create_masq()"). Fixes: 83dfe53c185e ("f2fs: fix reference leaks in f2fs_acl_create") Signed-off-by: Tiezhu Yang <kernelpatch@126.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: avoid build warn of fall_throughJaegeuk Kim1-0/+1
After merging the f2fs tree, today's linux-next build (x86_64_allmodconfig) produced this warning: In file included from fs/f2fs/dir.c:11: fs/f2fs/f2fs.h: In function '__mark_inode_dirty_flag': fs/f2fs/f2fs.h:2388:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (set) ^ fs/f2fs/f2fs.h:2390:2: note: here case FI_DATA_EXIST: ^~~~ Exposed by my use of -Wimplicit-fallthrough Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: fix race between write_checkpoint and write_beginSheng Yong1-2/+10
The following race could lead to inconsistent SIT bitmap: Task A Task B ====== ====== f2fs_write_checkpoint block_operations f2fs_lock_all down_write(node_change) down_write(node_write) ... sync ... up_write(node_change) f2fs_file_write_iter set_inode_flag(FI_NO_PREALLOC) ...... f2fs_write_begin(index=0, has inline data) prepare_write_begin __do_map_lock(AIO) => down_read(node_change) f2fs_convert_inline_page => update SIT __do_map_lock(AIO) => up_read(node_change) f2fs_flush_sit_entries <= inconsistent SIT finish write checkpoint sudden-power-off If SPO occurs after checkpoint is finished, SIT bitmap will be set incorrectly. Signed-off-by: Sheng Yong <shengyong1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: check memory boundary by insane namelenJaegeuk Kim1-1/+11
If namelen is corrupted to have very long value, fill_dentries can copy wrong memory area. Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: only flush the single temp bio cache which owns the target pageYunlong Song1-27/+10
Previously, when f2fs finds which temp bio cache owns the target page, it will flush all the three temp bio caches, but we only need to flush one single bio cache indeed, which can help to keep bio merged. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: fix out-place-update DIO writeChao Yu3-14/+32
In get_more_blocks(), we may override @create as below code: create = dio->op == REQ_OP_WRITE; if (dio->flags & DIO_SKIP_HOLES) { if (fs_startblk <= ((i_size_read(dio->inode) - 1) >> i_blkbits)) create = 0; } But in f2fs_map_blocks(), we only trigger f2fs_balance_fs() if @create is 1, so in LFS mode, dio overwrite under LFS mode can easily run out of free segments, result in below panic. Call Trace: allocate_segment_by_default+0xa8/0x270 [f2fs] f2fs_allocate_data_block+0x1ea/0x5c0 [f2fs] __allocate_data_block+0x306/0x480 [f2fs] f2fs_map_blocks+0x6f6/0x920 [f2fs] __get_data_block+0x4f/0xb0 [f2fs] get_data_block_dio_write+0x50/0x60 [f2fs] do_blockdev_direct_IO+0xcd5/0x21e0 __blockdev_direct_IO+0x3a/0x3c f2fs_direct_IO+0x1ff/0x4a0 [f2fs] generic_file_direct_write+0xd9/0x160 __generic_file_write_iter+0xbb/0x1e0 f2fs_file_write_iter+0xaf/0x220 [f2fs] __vfs_write+0xd0/0x130 vfs_write+0xb2/0x1b0 SyS_pwrite64+0x69/0xa0 ? vtime_user_exit+0x29/0x70 do_syscall_64+0x6e/0x160 entry_SYSCALL64_slow_path+0x25/0x25 RIP: new_curseg+0x36f/0x380 [f2fs] RSP: ffffac570393f7a8 So this patch introduces a parameter map.m_may_create to indicate that f2fs_map_blocks() is called from write or read path, which can give the right hint to let f2fs_map_blocks() trigger OPU allocation and call f2fs_balanc_fs() correctly. BTW, it disables physical address preallocation for direct IO in f2fs_preallocate_blocks, which is redundant to OPU allocation of f2fs_map_blocks. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: fix to be aware discard/preflush/dio command in is_idle()Chao Yu1-1/+5
This patch adds missing in-flight discard/preflush/dio command count check in is_idle(). Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: add to account direct IOChao Yu3-1/+64
This patch adds f2fs_dio_submit_bio() to hook submit_io/end_io functions in direct IO path, in order to account DIO. Later, we will add this count into is_idle() to let background GC/Discard thread be aware of DIO. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: move dir data flush to write checkpoint processYunlei He1-0/+3
This patch move dir data flush to write checkpoint process, by doing this, it may reduce some time for dir fsync. pre: -f2fs_do_sync_file enter -file_write_and_wait_range <- flush & wait -write_checkpoint -do_checkpoint <- wait all -f2fs_do_sync_file exit now: -f2fs_do_sync_file enter -write_checkpoint -block_operations <- flush dir & no wait -do_checkpoint <- wait all -f2fs_do_sync_file exit Signed-off-by: Yunlei He <heyunlei@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-12/+1
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: change segment to section in f2fs_ioc_gc_rangeYunlong Song1-1/+1
f2fs_ioc_gc_range skips blocks_per_seg each time, however, f2fs_gc moves blocks of section each time, so fix it from segment to section. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: export migration_granularity sysfs entryChao Yu2-0/+16
Add one sysfs entry to control migration granularity of GC in large section f2fs, it can be tuned to mitigate heavy overhead of migrating huge number of blocks in large section. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: support subsectional garbage collectionChao Yu3-6/+39
Section is minimal garbage collection unit of f2fs, in zoned block device, or ancient block mapping flash device, in order to improve GC efficiency, we can align GC unit to lower device erase unit, normally, it consists of multiple of segments. Once background or foreground GC triggers, it brings a large number of IOs, which will impact user IO, and also occupy cpu/memory resource intensively. So, to reduce impact of GC on large size section, this patch supports subsectional GC, in one cycle of GC, it only migrate partial segment{s} in victim section. Currently, by default, we use sbi->segs_per_sec as migration granularity. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: introduce __is_large_section() for cleanupChao Yu6-13/+15
Introduce a wrapper __is_large_section() to clean up codes. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: clean up f2fs_sb_has_##feature_nameChao Yu10-73/+73
In F2FS_HAS_FEATURE(), we will use F2FS_SB(sb) to get sbi pointer to access .raw_super field, to avoid unneeded pointer conversion, this patch changes to F2FS_HAS_FEATURE() accept sbi parameter directly. Just do cleanup, no logic change. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: remove codes of unused wio_mutexYunlong Song2-5/+1
Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: fix count of seg_freed to make sec_freed correctYunlong Song1-3/+4
When sbi->segs_per_sec > 1, and if some segno has 0 valid blocks before gc starts, do_garbage_collect will skip counting seg_freed++, and this will cause seg_freed < sbi->segs_per_sec and finally skip sec_freed++. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Signed-off-by: Chao Yu <yuchao0@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: fix to account preflush command for noflush_merge modeChao Yu1-0/+2
Previously, we only account preflush command for flush_merge mode, so for noflush_merge mode, we can not know in-flight preflush command count, fix it. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-26f2fs: avoid GC causing encrypted file corruptedYunlong Song1-0/+10
The encrypted file may be corrupted by GC in following case: Time 1: | segment 1 blkaddr = A | GC -> | segment 2 blkaddr = B | Encrypted block 1 is moved from blkaddr A of segment 1 to blkaddr B of segment 2, Time 2: | segment 1 blkaddr = B | GC -> | segment 3 blkaddr = C | Before page 1 is written back and if segment 2 become a victim, then page 1 is moved from blkaddr B of segment 2 to blkaddr Cof segment 3, during the GC process of Time 2, f2fs should wait for page 1 written back before reading it, or move_data_block will read a garbage block from blkaddr B since page is not written back to blkaddr B yet. Commit 6aa58d8a ("f2fs: readahead encrypted block during GC") introduce ra_data_block to read encrypted block, but it forgets to add f2fs_wait_on_page_writeback to avoid racing between GC and flush. Signed-off-by: Yunlong Song <yunlong.song@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-11-25Linux 4.20-rc4Linus Torvalds1-2/+2
2018-11-25MAINTAINERS: change Sparse's maintainerLuc Van Oostenryck2-2/+5
I'm taking over the maintainance of Sparse so add myself as maintainer and move Christopher's info to CREDITS. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-23net: gemini: Fix copy/paste errorAndreas Fiedler1-1/+1
The TX stats should be started with the tx_stats_syncp, there seems to be a copy/paste error in the driver. Signed-off-by: Andreas Fiedler <andreas.fiedler@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: phy: mscc: fix deadlock in vsc85xx_default_configQuentin Schulz1-9/+5
The vsc85xx_default_config function called in the vsc85xx_config_init function which is used by VSC8530, VSC8531, VSC8540 and VSC8541 PHYs mistakenly calls phy_read and phy_write in-between phy_select_page and phy_restore_page. phy_select_page and phy_restore_page actually take and release the MDIO bus lock and phy_write and phy_read take and release the lock to write or read to a PHY register. Let's fix this deadlock by using phy_modify_paged which handles correctly a read followed by a write in a non-standard page. Fixes: 6a0bfbbe20b0 ("net: phy: mscc: migrate to phy_select/restore_page functions") Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23dt-bindings: dsa: Fix typo in "probed"Fabio Estevam1-1/+1
The correct form is "can be probed", so fix the typo. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queueLorenzo Bianconi1-1/+3
Reset snd_queue tso_hdrs pointer to NULL in nicvf_free_snd_queue routine since it is used to check if tso dma descriptor queue has been previously allocated. The issue can be triggered with the following reproducer: $ip link set dev enP2p1s0v0 xdpdrv obj xdp_dummy.o $ip link set dev enP2p1s0v0 xdpdrv off [ 341.467649] WARNING: CPU: 74 PID: 2158 at mm/vmalloc.c:1511 __vunmap+0x98/0xe0 [ 341.515010] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 341.521874] pstate: 60400005 (nZCv daif +PAN -UAO) [ 341.526654] pc : __vunmap+0x98/0xe0 [ 341.530132] lr : __vunmap+0x98/0xe0 [ 341.533609] sp : ffff00001c5db860 [ 341.536913] x29: ffff00001c5db860 x28: 0000000000020000 [ 341.542214] x27: ffff810feb5090b0 x26: ffff000017e57000 [ 341.547515] x25: 0000000000000000 x24: 00000000fbd00000 [ 341.552816] x23: 0000000000000000 x22: ffff810feb5090b0 [ 341.558117] x21: 0000000000000000 x20: 0000000000000000 [ 341.563418] x19: ffff000017e57000 x18: 0000000000000000 [ 341.568719] x17: 0000000000000000 x16: 0000000000000000 [ 341.574020] x15: 0000000000000010 x14: ffffffffffffffff [ 341.579321] x13: ffff00008985eb27 x12: ffff00000985eb2f [ 341.584622] x11: ffff0000096b3000 x10: ffff00001c5db510 [ 341.589923] x9 : 00000000ffffffd0 x8 : ffff0000086868e8 [ 341.595224] x7 : 3430303030303030 x6 : 00000000000006ef [ 341.600525] x5 : 00000000003fffff x4 : 0000000000000000 [ 341.605825] x3 : 0000000000000000 x2 : ffffffffffffffff [ 341.611126] x1 : ffff0000096b3728 x0 : 0000000000000038 [ 341.616428] Call trace: [ 341.618866] __vunmap+0x98/0xe0 [ 341.621997] vunmap+0x3c/0x50 [ 341.624961] arch_dma_free+0x68/0xa0 [ 341.628534] dma_direct_free+0x50/0x80 [ 341.632285] nicvf_free_resources+0x160/0x2d8 [nicvf] [ 341.637327] nicvf_config_data_transfer+0x174/0x5e8 [nicvf] [ 341.642890] nicvf_stop+0x298/0x340 [nicvf] [ 341.647066] __dev_close_many+0x9c/0x108 [ 341.650977] dev_close_many+0xa4/0x158 [ 341.654720] rollback_registered_many+0x140/0x530 [ 341.659414] rollback_registered+0x54/0x80 [ 341.663499] unregister_netdevice_queue+0x9c/0xe8 [ 341.668192] unregister_netdev+0x28/0x38 [ 341.672106] nicvf_remove+0xa4/0xa8 [nicvf] [ 341.676280] nicvf_shutdown+0x20/0x30 [nicvf] [ 341.680630] pci_device_shutdown+0x44/0x88 [ 341.684720] device_shutdown+0x144/0x250 [ 341.688640] kernel_restart_prepare+0x44/0x50 [ 341.692986] kernel_restart+0x20/0x68 [ 341.696638] __se_sys_reboot+0x210/0x238 [ 341.700550] __arm64_sys_reboot+0x24/0x30 [ 341.704555] el0_svc_handler+0x94/0x110 [ 341.708382] el0_svc+0x8/0xc [ 341.711252] ---[ end trace 3f4019c8439959c9 ]--- [ 341.715874] page:ffff7e0003ef4000 count:0 mapcount:0 mapping:0000000000000000 index:0x4 [ 341.723872] flags: 0x1fffe000000000() [ 341.727527] raw: 001fffe000000000 ffff7e0003f1a008 ffff7e0003ef4048 0000000000000000 [ 341.735263] raw: 0000000000000004 0000000000000000 00000000ffffffff 0000000000000000 [ 341.742994] page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) where xdp_dummy.c is a simple bpf program that forwards the incoming frames to the network stack (available here: https://github.com/altoor/xdp_walkthrough_examples/blob/master/sample_1/xdp_dummy.c) Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: amd: add missing of_node_put()Yangtao Li1-1/+3
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. This place doesn't do that, so fix it. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23team: no need to do team_notify_peers or team_mcast_rejoin when disabling portHangbin Liu1-2/+0
team_notify_peers() will send ARP and NA to notify peers. team_mcast_rejoin() will send multicast join group message to notify peers. We should do this when enabling/changed to a new port. But it doesn't make sense to do it when a port is disabled. On the other hand, when we set mcast_rejoin_count to 2, and do a failover, team_port_disable() will increase mcast_rejoin.count_pending to 2 and then team_port_enable() will increase mcast_rejoin.count_pending to 4. We will send 4 mcast rejoin messages at latest, which will make user confused. The same with notify_peers.count. Fix it by deleting team_notify_peers() and team_mcast_rejoin() in team_port_disable(). Reported-by: Liang Li <liali@redhat.com> Fixes: fc423ff00df3a ("team: add peer notification") Fixes: 492b200efdd20 ("team: add support for sending multicast rejoins") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: fail XDP set if guest csum is negotiatedJason Wang1-2/+3
We don't support partial csumed packet since its metadata will be lost or incorrect during XDP processing. So fail the XDP set if guest_csum feature is negotiated. Fixes: f600b6905015 ("virtio_net: Add XDP support") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23virtio-net: disable guest csum during XDP setJason Wang1-6/+2
We don't disable VIRTIO_NET_F_GUEST_CSUM if XDP was set. This means we can receive partial csumed packets with metadata kept in the vnet_hdr. This may have several side effects: - It could be overridden by header adjustment, thus is might be not correct after XDP processing. - There's no way to pass such metadata information through XDP_REDIRECT to another driver. - XDP does not support checksum offload right now. So simply disable guest csum if possible in this the case of XDP. Fixes: 3f93522ffab2d ("virtio-net: switch off offloads on demand if possible on XDP set") Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Pavel Popa <pashinho1990@gmail.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/sched: act_police: add missing spinlock initializationDavide Caratti1-0/+1
commit f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") introduces a new spinlock, but forgets its initialization. Ensure that tcf_police_init() initializes 'tcfp_lock' every time a 'police' action is newly created, to avoid the following lockdep splat: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. <...> Call Trace: dump_stack+0x85/0xcb register_lock_class+0x581/0x590 __lock_acquire+0xd4/0x1330 ? tcf_police_init+0x2fa/0x650 [act_police] ? lock_acquire+0x9e/0x1a0 lock_acquire+0x9e/0x1a0 ? tcf_police_init+0x2fa/0x650 [act_police] ? tcf_police_init+0x55a/0x650 [act_police] _raw_spin_lock_bh+0x34/0x40 ? tcf_police_init+0x2fa/0x650 [act_police] tcf_police_init+0x2fa/0x650 [act_police] tcf_action_init_1+0x384/0x4c0 tcf_action_init+0xf6/0x160 tcf_action_add+0x73/0x170 tc_ctl_action+0x122/0x160 rtnetlink_rcv_msg+0x2a4/0x490 ? netlink_deliver_tap+0x99/0x400 ? validate_linkmsg+0x370/0x370 netlink_rcv_skb+0x4d/0x130 netlink_unicast+0x196/0x230 netlink_sendmsg+0x2e5/0x3e0 sock_sendmsg+0x36/0x40 ___sys_sendmsg+0x280/0x2f0 ? _raw_spin_unlock+0x24/0x30 ? handle_pte_fault+0xafe/0xf30 ? find_held_lock+0x2d/0x90 ? syscall_trace_enter+0x1df/0x360 ? __sys_sendmsg+0x5e/0xa0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x60/0x210 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1841c7cf10 Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 RSP: 002b:00007ffcf9df4d68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f1841c7cf10 RDX: 0000000000000000 RSI: 00007ffcf9df4dc0 RDI: 0000000000000003 RBP: 000000005bf56105 R08: 0000000000000002 R09: 00007ffcf9df8edc R10: 00007ffcf9df47e0 R11: 0000000000000246 R12: 0000000000671be0 R13: 00007ffcf9df4e84 R14: 0000000000000008 R15: 0000000000000000 Fixes: f2cbd4852820 ("net/sched: act_police: fix race condition on state variables") Reported-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: don't keep lonely packets forever in the gro hashPaolo Abeni1-2/+5
Eric noted that with UDP GRO and NAPI timeout, we could keep a single UDP packet inside the GRO hash forever, if the related NAPI instance calls napi_gro_complete() at an higher frequency than the NAPI timeout. Willem noted that even TCP packets could be trapped there, till the next retransmission. This patch tries to address the issue, flushing the old packets - those with a NAPI_GRO_CB age before the current jiffy - before scheduling the NAPI timeout. The rationale is that such a timeout should be well below a jiffy and we are not flushing packets eligible for sane GRO. v1 -> v2: - clarified the commit message and comment RFC -> v1: - added 'Fixes tags', cleaned-up the wording. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Fixes: 3b47d30396ba ("net: gro: add a per device gro flush timer") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net/ipv6: re-do dad when interface has IFF_NOARP flag changeHangbin Liu1-6/+13
When we add a new IPv6 address, we should also join corresponding solicited-node multicast address, unless the interface has IFF_NOARP flag, as function addrconf_join_solict() did. But if we remove IFF_NOARP flag later, we do not do dad and add the mcast address. So we will drop corresponding neighbour discovery message that came from other nodes. A typical example is after creating a ipvlan with mode l3, setting up an ipv6 address and changing the mode to l2. Then we will not be able to ping this address as the interface doesn't join related solicited-node mcast address. Fix it by re-doing dad when interface changed IFF_NOARP flag. Then we will add corresponding mcast group and check if there is a duplicate address on the network. Reported-by: Jianlin Shi <jishi@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23packet: copy user buffers before orphan or cloneWillem de Bruijn2-3/+19
tpacket_snd sends packets with user pages linked into skb frags. It notifies that pages can be reused when the skb is released by setting skb->destructor to tpacket_destruct_skb. This can cause data corruption if the skb is orphaned (e.g., on transmit through veth) or cloned (e.g., on mirror to another psock). Create a kernel-private copy of data in these cases, same as tun/tap zerocopy transmission. Reuse that infrastructure: mark the skb as SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx). Unlike other zerocopy packets, do not set shinfo destructor_arg to struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify when the original skb is released and a timestamp is recorded. Do not change this timestamp behavior. The ubuf_info->callback is not needed anyway, as no zerocopy notification is expected. Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The resulting value is not a valid ubuf_info pointer, nor a valid tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this. The fix relies on features introduced in commit 52267790ef52 ("sock: add MSG_ZEROCOPY"), so can be backported as is only to 4.14. Tested with from `./in_netns.sh ./txring_overwrite` from http://github.com/wdebruij/kerneltools/tests Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap") Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23arm64: cpufeature: Fix mismerge of CONFIG_ARM64_SSBD blockWill Deacon1-1/+1
When merging support for SSBD and the CRC32 instructions, the conflict resolution for the new capability entries in arm64_features[] inadvertedly predicated the availability of the CRC32 instructions on CONFIG_ARM64_SSBD, despite the functionality being entirely unrelated. Move the #ifdef CONFIG_ARM64_SSBD down so that it only covers the SSBD capability. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-23arm64: sysreg: fix sparse warningsSergey Matyukevich1-2/+2
Specify correct type for the constants to avoid the following sparse complaints: ./arch/arm64/include/asm/sysreg.h:471:42: warning: constant 0xffffffffffffffff is so big it is unsigned long ./arch/arm64/include/asm/sysreg.h:512:42: warning: constant 0xffffffffffffffff is so big it is unsigned long Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-22ibmvnic: Update driver queues after change in ring size supportThomas Falcon1-1/+8
During device reset, queue memory is not being updated to accommodate changes in ring buffer sizes supported by backing hardware. Track any differences in ring buffer sizes following the reset and update queue memory when possible. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22ibmvnic: Fix RX queue buffer cleanupThomas Falcon1-2/+2
The wrong index is used when cleaning up RX buffer objects during release of RX queues. Update to use the correct index counter. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net: thunderx: set xdp_prog to NULL if bpf_prog_add failsLorenzo Bianconi1-2/+7
Set xdp_prog pointer to NULL if bpf_prog_add fails since that routine reports the error code instead of NULL in case of failure and xdp_prog pointer value is used in the driver to verify if XDP is currently enabled. Moreover report the error code to userspace if nicvf_xdp_setup fails Fixes: 05c773f52b96 ("net: thunderx: Add basic XDP support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22net/dim: Update DIM start sample after each DIM iterationTal Gilboa1-0/+2
On every iteration of net_dim, the algorithm may choose to check for the system state by comparing current data sample with previous data sample. After each of these comparison, regardless of the action taken, the sample used as baseline is needed to be updated. This patch fixes a bug that causes DIM to take wrong decisions, due to never updating the baseline sample for comparison between iterations. This way, DIM always compares current sample with zeros. Although this is a functional fix, it also improves and stabilizes performance as the algorithm works properly now. Performance: Tested single UDP TX stream with pktgen: samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1 -m 24:8a:07:88:26:8b -f 3 -b 128 ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps. Also, toggling between profiles is less frequent with the fix. Fixes: 8115b750dbcb ("net/dim: use struct net_dim_sample as arg to net_dim") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-22flexfiles: use per-mirror specified stateid for IOTigran Mkrtchyan3-12/+32
rfc8435 says: For tight coupling, ffds_stateid provides the stateid to be used by the client to access the file. However current implementation replaces per-mirror provided stateid with by open or lock stateid. Ensure that per-mirror stateid is used by ff_layout_write_prepare_v4 and nfs4_ff_layout_prepare_ds. Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by: Rick Macklem <rmacklem@uoguelph.ca> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-22NFSv4.2 copy do not allocate memory under the lockOlga Kornievskaia2-20/+21
Bruce pointed out that we shouldn't allocate memory while holding a lock in the nfs4_callback_offload() and handle_async_copy() that deal with a racing CB_OFFLOAD and reply to COPY case. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-11-22iommu/vt-d: Use memunmap to free memremapPan Bian1-1/+1
memunmap() should be used to free the return of memremap(), not iounmap(). Fixes: dfddb969edf0 ('iommu/vt-d: Switch from ioremap_cache to memremap') Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2018-11-22Revert "Input: Add the `REL_WHEEL_HI_RES` event code"Benjamin Tissoires2-20/+1
This reverts commit aaf9978c3c0291ef3beaa97610bc9c3084656a85. Quoting Peter: There is a HID feature report called "Resolution Multiplier" Described in the "Enhanced Wheel Support in Windows" doc and the "USB HID Usage Tables" page 30. http://download.microsoft.com/download/b/d/1/bd1f7ef4-7d72-419e-bc5c-9f79ad7bb66e/wheel.docx https://www.usb.org/sites/default/files/documents/hut1_12v2.pdf This was new for Windows Vista, so we're only a decade behind here. I only accidentally found this a few days ago while debugging a stuck button on a Microsoft mouse. The docs above describe it like this: a wheel control by default sends value 1 per notch. If the resolution multiplier is active, the wheel is expected to send a value of $multiplier per notch (e.g. MS Sculpt mouse) or just send events more often, i.e. for less physical motion (e.g. MS Comfort mouse). For the latter, you need the right HW of course. The Sculpt mouse has tactile wheel clicks, so nothing really changes. The Comfort mouse has continuous motion with no tactile clicks. Similar to the free-wheeling Logitech mice but without any inertia. Note that the doc also says that Vista and onwards *always* enable this feature where available. An example HID definition looks like this: Usage Page Generic Desktop (0x01) Usage Resolution Multiplier (0x48) Logical Minimum 0 Logical Maximum 1 Physical Minimum 1 Physical Maximum 16 Report Size 2 # in bits Report Count 1 Feature (Data, Var, Abs) So the actual bits have values 0 or 1 and that reflects real values 1 or 16. We've only seen single-bits so far, so there's low-res and hi-res, but nothing in between. The multiplier is available for HID usages "Wheel" and "AC Pan" (horiz wheel). Microsoft suggests that > Vendors should ship their devices with smooth scrolling disabled and allow > Windows to enable it. This ensures that the device works like a regular HID > device on legacy operating systems that do not support smooth scrolling. (see the wheel doc linked above) The mice that we tested so far do reset on unplug. Device Support looks to be all (?) Microsoft mice but nothing else Not supported: - Logitech G500s, G303 - Roccat Kone XTD - all the cheap Lenovo, HP, Dell, Logitech USB mice that come with a workstation that I could find don't have it. - Etekcity something something - Razer Imperator Supported: - Microsoft Comfort Optical Mouse 3000 - yes, physical: 1:4 - Microsoft Sculpt Ergonomic Mouse - yes, physical: 1:12 - Microsoft Surface mouse - yes, physical: 1:4 So again, I think this is really just available on Microsoft mice, but probably all decent MS mice released over the last decade. Looking at the hardware itself: - no noticeable notches in the weel - low-res: 18 events per 360deg rotation (click angle 20 deg) - high-res: 72 events per 360deg → matches multiplier of 4 - I can feel the notches during wheel turns - low-res: 24 events per 360 deg rotation (click angle 15 deg) - horiz wheel is tilt-based, continuous output value 1 - high-res: 24 events per 360deg with value 12 → matches multiplier of 12 - horiz wheel output rate doubles/triples?, values is 3 - It's a touch strip, not a wheel so no notches - high-res: events have value 4 instead of 1 a bit strange given that it doesn't actually have notches. Ok, why is this an issue for the current API? First, because the logitech multiplier used in Harry's patches looks suspiciously like the Resolution Multiplier so I think we should assume it's the same thing. Nestor, can you shed some light on that? - `REL_WHEEL` is defined as the number of notches, emulated where needed. - `REL_WHEEL_HI_RES` is the movement of the user's finger in microns. - `WM_MOUSEWHEEL` (Windows) is is a multiple of 120, defined as "the threshold for action to be taken and one such action" https://docs.microsoft.com/en-us/windows/desktop/inputdev/wm-mousewheel If the multiplier is set to M, this means we need an accumulated value of M until we can claim there was a wheel click. So after enabling the multiplier and setting it to the maximum (like Windows): - M units are 15deg rotation → 1 unit is 2620/M micron (see below). This is the `REL_WHEEL_HI_RES` value. - wheel diameter 20mm: 15 deg rotation is 2.62mm, 2620 micron (pi * 20mm / (360deg/15deg)) - For every M units accumulated, send one `REL_WHEEL` event The problem here is that we've now hardcoded 20mm/15 deg into the kernel and we have no way of getting the size of the wheel or the click angle into the kernel. In userspace we now have to undo the kernel's calculation. If our click angle is e.g. 20 degree we have to undo the (lossy) calculation from the kernel and calculate the correct angle instead. This also means the 15 is a hardcoded option forever and cannot be changed. In hid-logitech-hidpp.c, the microns per unit is hardcoded per device. Harry, did you measure those by hand? We'd need to update the kernel for every device and there are 10 years worth of devices from MS alone. The multiplier default is 8 which is in the right ballpark, so I'm pretty sure this is the same as the Resolution Multiplier, just in HID++ lingo. And given that the 120 magic factor is what Windows uses in the end, I can't imagine Logitech rolling their own thing here. Nestor? And we're already fairly inaccurate with the microns anyway. The MX Anywhere 2S has a click angle of 20 degrees (18 stops) and a 17mm wheel, so a wheel notch is approximately 2.67mm, one event at multiplier 8 (1/8 of a notch) would be 334 micron. That's only 80% of the fallback value of 406 in the kernel. Multiplier 6 gives us 445micron (10% off). I'm assuming multiplier 7 doesn't exist because it's not a factor of 120. Summary: Best option may be to simply do what Windows is doing, all the HW manufacturers have to use that approach after all. Switch `REL_WHEEL_HI_RES` to report in fractions of 120, with 120 being one notch and divide that by the multiplier for the actual events. So e.g. the Logitech multiplier 8 would send value 15 for each event in hi-res mode. This can be converted in userspace to whatever userspace needs (combined with a hwdb there that tells you wheel size/click angle/...). Conflicts: include/uapi/linux/input-event-codes.h -> I kept the new reserved event in the code, so I had to adapt the revert slightly Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: input: Create a utility class for counting scroll events"Benjamin Tissoires2-73/+0
This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration""Benjamin Tissoires1-34/+13
This reverts commit 051dc9b0579602bd63e9df74d0879b5293e71581. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"Benjamin Tissoires1-245/+4
This reverts commit d56ca9855bf924f3bc9807a3e42f38539df3f41f. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice"Benjamin Tissoires1-5/+10
This reverts commit 3fe1d6bbcd16f384d2c7dab2caf8e4b2df9ea7e6. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: logitech: fix a used uninitialized GCC warning"Benjamin Tissoires1-3/+5
This reverts commit 5fe2ccbef9d7aecf5c4402c753444f1a12096cfd. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
2018-11-22Revert "HID: input: simplify/fix high-res scroll event handling"Benjamin Tissoires1-21/+22
This reverts commit 044ee890286153a1aefb40cb8b6659921aecb38b. It turns out the current API is not that compatible with some Microsoft mice, so better start again from scratch. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Harry Cutts <hcutts@chromium.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Jiri Kosina <jkosina@suse.cz>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.