| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The migration code ends up temporarily stashing information of the wrong
type in unused fields of the newly allocated destination folio. That
all works fine, but gcc does complain about the pointer type mis-use:
mm/migrate.c: In function ‘__migrate_folio_extract’:
mm/migrate.c:1050:20: note: randstruct: casting between randomized structure pointer types (ssa): ‘struct anon_vma’ and ‘struct address_space’
1050 | *anon_vmap = (void *)dst->mapping;
| ~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
and gcc is actually right to complain since it really doesn't understand
that this is a very temporary special case where this is ok.
This could be fixed in different ways by just obfuscating the assignment
sufficiently that gcc doesn't see what is going on, but the truly
"proper C" way to do this is by explicitly using a union.
Using unions for type conversions like this is normally hugely ugly and
syntactically nasty, but this really is one of the few cases where we
want to make it clear that we're not doing type conversion, we're really
re-using the value bit-for-bit just using another type.
IOW, this should not become a common pattern, but in this one case using
that odd union is probably the best way to document to the compiler what
is conceptually going on here.
[ Side note: there are valid cases where we convert pointers to other
pointer types, notably the whole "folio vs page" situation, where the
types actually have fundamental commonalities.
The fact that the gcc note is limited to just randomized structures
means that we don't see equivalent warnings for those cases, but it
migth also mean that we miss other cases where we do play these kinds
of dodgy games, and this kind of explicit conversion might be a good
idea. ]
I verified that at least for an allmodconfig build on x86-64, this
generates the exact same code, apart from line numbers and assembler
comment changes.
Fixes: 64c8902ed441 ("migrate_pages: split unmap_and_move() to _unmap() and _move()")
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The usermodehelper code uses two fake pointers for the two capability
cases: CAP_BSET for reading and writing 'usermodehelper_bset', and
CAP_PI to read and write 'usermodehelper_inheritable'.
This seems to be a completely unnecessary indirection, since we could
instead just use the pointers themselves, and never have to do any "if
this then that" kind of logic.
So just get rid of the fake pointer values, and use the real pointer
values instead.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is passing IS_ERR() instead of PTR_ERR() so instead of an error
code it prints and returns the number 1.
Fixes: 4a55ed6f89f5 ("i2c: Add GXP SoC I2C Controller")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Nick Hawkins <nick.hawkins@hpe.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
According to Documentation/i2c/fault-codes.rst, NACK after sending an
address should be -ENXIO.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
There used to be error messages which had to go. Now, it only consists
of 'break's, so it can go.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
The ppc64le_allmodconfig sets I2C_PASEMI=y and leaves COMPILE_TEST to
default to y and I2C_APPLE to default to m, running into a known
incompatible configuration that breaks the build [1]. Specifically,
a common dependency (i2c-pasemi-core.o in this case) cannot be used by
both builtin and module consumers.
Disable I2C_APPLE when I2C_PASEMI is a builtin to prevent this.
[1]: https://lore.kernel.org/all/202112061809.XT99aPrf-lkp@intel.com
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
If the check (id != 0x41) fails, then id == 0x41 and
the other check in 'else' branch also
fails: id & 0x0F = 0b01000001 & 0b00001111 = 0b00000001.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Link: https://lore.kernel.org/r/20230225184322.6286-2-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If snd_ctl_add() fails in aureon_add_controls(), it immediately returns
and leaves ice->gpio_mutex locked. ice->gpio_mutex locks in
snd_ice1712_save_gpio_status and unlocks in
snd_ice1712_restore_gpio_status(ice).
It seems that the mutex is required only for aureon_cs8415_get(),
so snd_ice1712_restore_gpio_status(ice) can be placed
just after that. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230225184322.6286-1-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
HP EliteDesk 800 G6 Tower PC (103c:870c) requires a quirk for enabling
headset-mic.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217008
Link: https://lore.kernel.org/r/20230223074749.1026060-1-l.stelmach@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The headset jack works better with model=alc283-dac-wcaps. Without this
option, the headset insertion (separate physical jack) may not be handled
correctly (re-insertion is required).
It seems that it follows the "Intel Reference Board" defaults.
Reported-by: steven_wu2@dell.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230221102157.515852-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 104ff59af73a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI
controller") enabled low power mode for the Tiger Lake AHIC adapter in
the author system but created regressions for others. Revert this patch
for now until a better solution is found to make this adapter
eco-friendly.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114
CC: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Dikshita's old email is still picked up by the likes of get_maintainer.pl
and keeps bouncing. Map it to his current one.
Link: https://lkml.kernel.org/r/20230228153335.907164-2-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Dikshita Agarwal <dikshita@qti.qualcomm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Vikash's old email is still picked up by the likes of get_maintainer.pl
and keeps bouncing. Map it to his current one.
Link: https://lkml.kernel.org/r/20230228153335.907164-3-konrad.dybcio@linaro.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
file_ra_state_init() assumes that the file_ra_state has been zeroed out.
Fixes a KMSAN used-unintialized issue (at least).
Fixes: cf948cbc35e80 ("cramfs: read_mapping_page() is synchronous")
Reported-by: syzbot <syzbot+8ce7f8308d91e6b8bbe2@syzkaller.appspotmail.com>
Link: https://lkml.kernel.org/r/0000000000008f74e905f56df987@google.com
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.
As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.
To fix this error, we move all iput calls before hfsplus_btree_close.
Note that this patch is tested on Syzbot.
Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in
panic_print") introduced a setting for the "panic_print" kernel parameter
to allow users to request a NMI backtrace on panic. Problem is that the
panic_print handling happens after the secondary CPUs are already
disabled, hence this option ended-up being kind of a no-op - kernel skips
the NMI trace in idling CPUs, which is the case of offline CPUs.
Fix it by checking the NMI backtrace bit in the panic_print prior to the
CPU disabling function.
Link: https://lkml.kernel.org/r/20230226160838.414257-1-gpiccoli@igalia.com
Fixes: 8d470a45d1a6 ("panic: add option to dump all CPUs backtraces in panic_print")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: <stable@vger.kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
commit 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local
array") removed -ENOMEM as a possible return value, so update the comments
accordingly.
Link: https://lkml.kernel.org/r/20230224042618.9092-1-ebiggers@kernel.org
Fixes: 67222c4ba8af ("lib: parser: optimize match_NUMBER apis to use local array")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Li Lingfeng <lilingfeng3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Yu Kuai <yukuai1@huaweicloud.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that memcpy/memset/memmove are no longer overridden by KASAN, we can
just use the normal symbol names in uninstrumented files.
Drop the preprocessor redefinitions.
Link: https://lkml.kernel.org/r/20230224085942.1791837-4-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The tests for memset/memmove have been failing since they haven't been
instrumented in 69d4c0d32186.
Fix the test to recognize when memintrinsics aren't instrumented, and skip
test cases accordingly. We also need to conditionally pass -fno-builtin
to the test, otherwise the instrumentation pass won't recognize
memintrinsics and end up not instrumenting them either.
Link: https://lkml.kernel.org/r/20230224085942.1791837-3-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Where the compiler instruments meminstrinsics by generating calls to
__asan/__hwasan_ prefixed functions, let the compiler consider
memintrinsics as builtin again.
To do so, never override memset/memmove/memcpy if the compiler does the
correct instrumentation - even on !GENERIC_ENTRY architectures.
[elver@google.com: powerpc: don't rename memintrinsics if compiler adds prefixes]
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1]
Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com
Link: https://lkml.kernel.org/r/20230224085942.1791837-2-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang 15 provides an option to prefix memcpy/memset/memmove calls with
__asan_/__hwasan_ in instrumented functions:
https://reviews.llvm.org/D122724
GCC will add support in future:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108777
Use it to regain KASAN instrumentation of memcpy/memset/memmove on
architectures that require noinstr to be really free from instrumented
mem*() functions (all GENERIC_ENTRY architectures).
Link: https://lkml.kernel.org/r/20230224085942.1791837-1-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org> # build only
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The block layer might merge together discard requests up until the
max_discard_segments limit is hit, but blk_insert_cloned_request checks
the segment count against max_segments regardless of the req op. This
can result in errors like the following when discards are issued through
a DM device and max_discard_segments exceeds max_segments for the queue
of the chosen underlying device.
blk_insert_cloned_request: over max segments limit. (256 > 129)
Fix this by looking at the req_op and enforcing the appropriate segment
limit - max_discard_segments for REQ_OP_DISCARDs and max_segments for
everything else.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230301000655.48112-1-ushankar@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To address this build error:
BINDGEN rust/bindings/bindings_generated.rs
BINDGEN rust/bindings/bindings_helpers_generated.rs
EXPORTS rust/exports_core_generated.h
RUSTC P rust/libmacros.so
RUSTC L rust/compiler_builtins.o
RUSTC L rust/alloc.o
RUSTC L rust/bindings.o
RUSTC L rust/build_error.o
EXPORTS rust/exports_alloc_generated.h
error[E0588]: packed type cannot transitively contain a `#[repr(align)]` type
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10094:1
|
10094 | / pub struct alt_instr {
10095 | | pub instr_offset: s32,
10096 | | pub repl_offset: s32,
10097 | | pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
10098 | | pub instrlen: u8_,
10099 | | pub replacementlen: u8_,
10100 | | }
| |_^
|
note: `alt_instr__bindgen_ty_1__bindgen_ty_1` has a `#[repr(align)]` attribute
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10111:1
|
10111 | / pub struct alt_instr__bindgen_ty_1__bindgen_ty_1 {
10112 | | pub _bitfield_1: __BindgenBitfieldUnit<[u8; 4usize], u16>,
10113 | | }
| |_^
note: `alt_instr` contains a field of type `alt_instr__bindgen_ty_1`
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10097:9
|
10097 | pub __bindgen_anon_1: alt_instr__bindgen_ty_1,
| ^^^^^^^^^^^^^^^^
note: ...which contains a field of type `alt_instr__bindgen_ty_1__bindgen_ty_1`
--> /var/home/acme/git/linux/rust/bindings/bindings_generated.rs:10104:9
|
10104 | pub __bindgen_anon_1: alt_instr__bindgen_ty_1__bindgen_ty_1,
| ^^^^^^^^^^^^^^^^
error: aborting due to previous error
For more information about this error, try `rustc --explain E0588`.
make[1]: *** [rust/Makefile:389: rust/bindings.o] Error 1
make: *** [Makefile:1293: prepare] Error 2
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 5d1dd961e743 ("x86/alternatives: Add alt_instr.flags")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
openrisc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
nios2 equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
microblaze equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
ia64 equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
sparc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
alpha equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
parisc equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
hexagon equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Acked-by: Brian Cain <bcain@quicinc.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
riscv equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
m68k equivalent of 26178ec11ef3 "x86: mm: consolidate VM_FAULT_RETRY handling"
If e.g. get_user() triggers a page fault and a fatal signal is caught, we might
end up with handle_mm_fault() returning VM_FAULT_RETRY and not doing anything
to page tables. In such case we must *not* return to the faulting insn -
that would repeat the entire thing without making any progress; what we need
instead is to treat that as failed (user) memory access.
Tested-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Recent test_kprobe_missed kprobes kunit test uncovers the following
problem. Once kprobe is triggered from another kprobe (kprobe reenter),
all future kprobes on this cpu are considered as kprobe reenter, thus
pre_handler and post_handler are not being called and kprobes are counted
as "missed".
Commit b9599798f953 ("[S390] kprobes: activation and deactivation")
introduced a simpler scheme for kprobes (de)activation and status
tracking by using push_kprobe/pop_kprobe, which supposed to work for
both initial kprobe entry as well as kprobe reentry and helps to avoid
handling those two cases differently. The problem is that a sequence of
calls in case of kprobes reenter:
push_kprobe() <- NULL (current_kprobe)
push_kprobe() <- kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it
to NULL. In fact push_kprobe/pop_kprobe can only store a single state
(there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but
sufficient, there is no need to have another prev_kprobe just to store
NULL. To make a simple and backportable fix simply reset "prev_kprobe"
when kprobe is poped from this "stack". No need to worry about
"kprobe_status" in this case, because its value is only checked when
current_kprobe != NULL.
Cc: stable@vger.kernel.org
Fixes: b9599798f953 ("[S390] kprobes: activation and deactivation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
[<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
[<00000003e3d02e82>] __might_resched+0x60a/0x668
[<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
[<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
[<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
[<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
[<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
[<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
[<00000003e3ce30f8>] kthread+0x2d0/0x398
[<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
[<00000003e60ccada>] ret_from_fork+0xa/0x40
The reason for this error report is that kprobes handling code failed
to restore irqs.
The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep <- original kprobe (saves kprobe_saved_imask)
enable_singlestep <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)
There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.
Cc: stable@vger.kernel.org
Fixes: 4ba069b802c2 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The single difference between returning 0 and returning an error code in
a platform remove callback is that in the latter case the platform core
emits a warning about the error being ignored.
at91wdt_remove() already emits a warning in the error case, so suppress
the more generic (and less helpful) one by returning 0.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230217095317.1213387-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
MT7621 SoC has a system controller node. Watchdog need to access to reset
status register. Ralink architecture and related driver are old and from
the beggining they are using some architecture dependent operations for
accessing this shared registers through 'asm/mach-ralink/ralink_regs.h'
header file. However this is not ideal from a driver perspective which can
just access to the system controller registers in an arch independent way
using regmap syscon APIs. Update Kconfig accordingly to select new added
dependencies and allow driver to be compile tested.
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-6-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Instead of using static global definitions in driver code, refactor code
introducing a new watchdog driver data structure and use it along the
code.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20230214103936.1061078-5-sergio.paracuellos@gmail.com
[groeck: unsigned -> unsigned int]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
MT7621 SoC provides a system controller node for accessing to some registers.
Add a phandle in this node to avoid using MIPS related arch operations and
includes in watchdog driver code.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20230214103936.1061078-2-sergio.paracuellos@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
This patch is used to fix following compilation issue with legacy gcc
error: ‘for’ loop initial declarations are only allowed in C99 mode
for (int i = 0; i < adev->vcn.num_vcn_inst; ++i) {
Signed-off-by: bobzhou <bob.zhou@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
More branch devices are able to support Freesync
over PCon so include them in the list of supporting devices.
[how]
Add more compatible PCon devices in the whitelist
for Freesync over Pcon.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 4f1b5e739dfd1edde33329e3f376733a131fb1ff.
[Why & How]
Original change causes a regression. Revert
until fix is available.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:
shift exponent 4294966273 is too large for 32-bit type 'int'
[HOW]
In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Needs to set the default value of the LTTPR timeout after resume.
[How]
Set the default (3.2ms) timeout at resuming if the sink supports
LTTPR
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ryan Lin <tsung-hua.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.
[ 489.885525] Call Trace:
[ 489.885525] <TASK>
[ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm]
[ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu]
[ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0
[ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 489.886132] ? __pm_runtime_resume+0x60/0x90
[ 489.886134] pci_device_remove+0x3e/0xb0
[ 489.886135] __device_release_driver+0x1ab/0x2a0
[ 489.886137] driver_detach+0xf3/0x140
[ 489.886138] bus_remove_driver+0x6c/0xf0
[ 489.886140] driver_unregister+0x31/0x60
[ 489.886141] pci_unregister_driver+0x40/0x90
[ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu]
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Signed-off-by: longlyao <Longlong.Yao@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
building with gcc and W=1 reports
drivers/gpu/drm/amd/amdgpu/vcn_v4_0.c:81:29: error: variable
‘ring’ set but not used [-Werror=unused-but-set-variable]
81 | struct amdgpu_ring *ring;
| ^~~~
ring is not used so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Variable adev->crtc_irq.num_types was initialized as the value of
adev->mode_info.num_crtc at early_init stage, later at hw_init stage,
the num_crtc changed due to the display pipe harvest on some SKUs,
but the num_types was not updated accordingly, that cause below error
in gpu recover.
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_crtc_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_pflip_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
*ERROR* amdgpu_dm_set_vupdate_irq_state: crtc is NULL at id :3
[How]
Defer the initialization of num_types to eliminate the error logs.
Signed-off-by: tiancyin <tianci.yin@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A mistake has been made in the BIOS for some ASICs with NBIO 7.5.1
where some NBIO registers aren't properly setup.
Ensure that they're set during initialization.
Tested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
This will let us pass the kms_hdr.bpc_switch IGT
test.
The reason the bpc restriction was required is
historical. At one point in time we were not falling
back to a lower bpc when we didn't have enough
bandwidth for the maximum bpc reported by a display.
This meant that we couldn't enable some high refresh
modes unless we limitted the bpc.
Starting with this patch the issue is fixed:
commit cbd14ae7ea93 ("drm/amd/display: Fix
incorrectly pruned modes with deep color")
This patch implemented a fallback mechanism if mode
validation failed at the max bpc. This means users
now automatically get all modes that can be supported
by at least 6 bpc. The driver will enable the mode
with the highest possible bpc that is supported by
the display.
v2:
- explain why this is no longer needed (Michel)
- refer to commit that fixed bpc fallback (Michel)
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Joshua Ashton <joshua@froggi.es>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: Michel Dänzer <michel.daenzer@mailbox.org>
Reviewed-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fixes following warnings:
warning: no previous prototype for 'umc_v8_10_convert_error_address'
warning: variable 'channel_index' set but not used
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
Linus Torvalds
Dan Carpenter
Wolfram Sang
Benjamin Gray
Dmitry Fomin
Łukasz Stelmach
Jaroslav Kysela
Damien Le Moal
Konrad Dybcio
Andrew Morton
Dongliang Mu
Guilherme G. Piccoli
Eric Biggers
Marco Elver
Uday Shankar
Arnaldo Carvalho de Melo
Al Viro
Vasily Gorbik
Uwe Kleine-König
Sergio Paracuellos
bobzhou
Sung Joon Kim
Aric Cyr
Alex Hung
Ryan Lin
Horatio Zhang
Tom Rix
tiancyin
Mario Limonciello
Harry Wentland
Candice Li