| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The hold boot can be managed by the SCMI controller as a reset.
If the "hold_boot" reset is defined in the device tree, use it.
Else use the syscon controller directly to access to the register.
The support of the SMC call is deprecated but kept for legacy support.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230512093926.661509-3-arnaud.pouliquen@foss.st.com
|
|
With the introduction of the SCMI (System Control and Management
Interface), it is now possible to use the SCMI to handle the
hold boot instead of a dedicated SMC call.
As consequence two configurations are possible:
- without SCMI server on OP-TEE:
use the Linux rcc reset service and use syscon for the MCU hold boot
- With SCMI server on OP-TEE:
use the SCMI reset service for both the MCU reset and the MCU hold boot.
This patch:
- make optional and deprecated the use of the property st,syscfg-tz
which was used to check if the trusted Zone was enable to use scm call,
to manage the hold boot. The reset controller phandle is used instead
to select the configurations.
- make st,syscfg-holdboot optional
- adds properties check on resets definitions.
- adds an example of the SCMI reset service usage.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230512093926.661509-2-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
Without CONFIG_PM, the driver warns about unused functions:
drivers/remoteproc/imx_dsp_rproc.c:1210:12: error: 'imx_dsp_runtime_suspend' defined but not used [-Werror=unused-function]
1210 | static int imx_dsp_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~
drivers/remoteproc/imx_dsp_rproc.c:1178:12: error: 'imx_dsp_runtime_resume' defined but not used [-Werror=unused-function]
1178 | static int imx_dsp_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
Change the old SET_SYSTEM_SLEEP_PM_OPS()/SET_RUNTIME_PM_OPS()
helpers to their modern replacements that avoid the warning,
and remove the now unnecessary __maybe_unused annotations
on the other PM helper functions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230420213610.2219080-1-arnd@kernel.org
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-18-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-17-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-16-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-11-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230504194453.1150368-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/20230504194453.1150368-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230504194453.1150368-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
|
|
|
|
This reverts commit a980755beb5aca9002e1c95ba519b83a44242b5b.
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This reverts commit 51924ae69eea5bc90b5da525fbcf4bbd5f8551b3.
We need to better polish building with BPF skels, so revert back to
making it an experimental feature that has to be explicitely enabled
using BUILD_BPF_SKEL=1.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The allocated dmapool pages are never freed for the lifetime of the pool.
There is no need for the two level list+stack lookup for finding a free
block since nothing is ever removed from the list. Just use a simple
stack, reducing time complexity to constant.
The implementation inserts the stack linking elements and the dma handle
of the block within itself when freed. This means the smallest possible
dmapool block is increased to at most 16 bytes to accommodate these
fields, but there are no exisiting users requesting a dma pool smaller
than that anyway.
Removing the list has a significant change in performance. Using the
kernel's micro-benchmarking self test:
Before:
# modprobe dmapool_test
dmapool test: size:16 blocks:8192 time:57282
dmapool test: size:64 blocks:8192 time:172562
dmapool test: size:256 blocks:8192 time:789247
dmapool test: size:1024 blocks:2048 time:371823
dmapool test: size:4096 blocks:1024 time:362237
After:
# modprobe dmapool_test
dmapool test: size:16 blocks:8192 time:24997
dmapool test: size:64 blocks:8192 time:26584
dmapool test: size:256 blocks:8192 time:33542
dmapool test: size:1024 blocks:2048 time:9022
dmapool test: size:4096 blocks:1024 time:6045
The module test allocates quite a few blocks that may not accurately
represent how these pools are used in real life. For a more marco level
benchmark, running fio high-depth + high-batched on nvme, this patch shows
submission and completion latency reduced by ~100usec each, 1% IOPs
improvement, and perf record's time spent in dma_pool_alloc/free were
reduced by half.
[kbusch@kernel.org: push new blocks in ascending order]
Link: https://lkml.kernel.org/r/20230221165400.1595247-1-kbusch@meta.com
Link: https://lkml.kernel.org/r/20230126215125.4069751-12-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If debug is enabled, dmapool will poison the range, so no need to clear it
to 0 immediately before writing over it.
Link: https://lkml.kernel.org/r/20230126215125.4069751-11-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The actions for busy and not busy are mostly the same, so combine these
and remove the unnecessary function. Also, the pool is about to be freed
so there's no need to poison the page data since we only check for poison
on alloc, which can't be done on a freed pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-10-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Various fields of the dma pool are set in different places. Move it all
to one function.
Link: https://lkml.kernel.org/r/20230126215125.4069751-9-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Handle the error in a condition so the good path can be in the normal
flow.
Link: https://lkml.kernel.org/r/20230126215125.4069751-8-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clean up the normal path by moving the debug code outside it.
Link: https://lkml.kernel.org/r/20230126215125.4069751-7-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Avoid double-memset of the same allocated memory in dma_pool_alloc() when
both DMAPOOL_DEBUG is enabled and init_on_alloc=1.
Link: https://lkml.kernel.org/r/20230126215125.4069751-6-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
To represent the size of a single allocation, dmapool currently uses
'unsigned int' in some places and 'size_t' in other places. Standardize
on 'unsigned int' to reduce overhead, but use 'size_t' when counting all
the blocks in the entire pool.
Link: https://lkml.kernel.org/r/20230126215125.4069751-5-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Link: https://lkml.kernel.org/r/20230126215125.4069751-4-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
dmapool originally tried to support pools without a device because
dma_alloc_coherent() supports allocations without a device. But nobody
ended up using dma pools without a device, and trying to do so will result
in an oops. So remove the checks for pool->dev == NULL since they are
unneeded bloat.
[kbusch@kernel.org: add check for null dev on create]
Link: https://lkml.kernel.org/r/20230126215125.4069751-3-kbusch@meta.com
Fixes: 2d55c16c0c54 ("dmapool: create/destroy cleanup")
Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix another case of an incorrect check for the returned 'folio' value
from __filemap_get_folio().
The failure case used to return NULL, but was changed by commit
66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio").
But in the meantime, commit ec108d3cc766 ("NFS: Convert readdir page
array functions to use a folio") added a new user of that function.
And my merge of the two did not fix this up correctly.
The ext4 merge had the same issue, but that one had been caught in
linux-next and got properly fixed while merging.
Fixes: 0127f25b5dfc ("Merge tag 'nfs-for-6.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs")
Cc: Anna Schumaker <anna@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Keep returning NULL on failure instead of letting an ERR_PTR escape to
callers that don't expect it.
Link: https://lkml.kernel.org/r/20230503154526.1223095-2-hch@lst.de
Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Howells <dhowells@redhat.com>
Tested-by: David Howells <dhowells@redhat.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned.
Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the page is pinned, there's no point in trying to reclaim it.
Furthermore if the page is from the page cache we don't want to reclaim
fs-private data from the page because the pinning process may be writing
to the page at any time and reclaiming fs private info on a dirty page can
upset the filesystem (see link below).
Link: https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
Link: https://lkml.kernel.org/r/20230428124140.30166-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.
This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.
In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.
Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code.
Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We may still have inconsistent input parameters even if we choose not to
merge and the vma_merge() invariant checks are useful for checking this
with no production runtime cost (these are only relevant when
CONFIG_DEBUG_VM is specified).
Therefore, perform these checks regardless of whether we merge.
This is relevant, as a recent issue (addressed in commit "mm/mempolicy:
Correctly update prev when policy is equal on mbind") in the mbind logic
was only picked up in the 6.2.y stable branch where these assertions are
performed prior to determining mergeability.
Had this remained the same in mainline this issue may have been picked up
faster, so moving forward let's always check them.
Link: https://lkml.kernel.org/r/df548a6ae3fa135eec3b446eb3dae8eb4227da97.1682885809.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Smatch reports that filemap_fault() was missed in the conversion of
__filemap_get_folio() error returns from NULL to ERR_PTR.
Fixes: 66dabbb65d67 ("mm: return an ERR_PTR from __filemap_get_folio")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-by: syzbot+48011b86c8ea329af1b9@syzkaller.appspotmail.com
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 0da6e5fd6c37 ("gcc: disable '-Warray-bounds' for gcc-13 too") makes
config GCC11_NO_ARRAY_BOUNDS to be for disabling -Warray-bounds in any gcc
version 11 and upwards, and with that, removes the GCC12_NO_ARRAY_BOUNDS
config as it is now covered by the semantics of GCC11_NO_ARRAY_BOUNDS.
As GCC11_NO_ARRAY_BOUNDS is yes by default, there is no need for the s390
architecture to explicitly select GCC11_NO_ARRAY_BOUNDS. Hence, the select
GCC12_NO_ARRAY_BOUNDS in arch/s390/Kconfig can simply be dropped.
Remove the unneeded "select GCC12_NO_ARRAY_BOUNDS".
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Ensure the metric threshold is copied correctly or else a use of
uninitialized memory happens.
Fixes: d0a3052f6faefffc ("perf metric: Compute and print threshold values")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230505204119.3443491-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Linus reported a build break due to using a vmlinux without a BTF elf
section to generate the vmlinux.h header with bpftool for use in the BPF
tools in tools/perf/util/bpf_skel/*.bpf.c.
Instead add a vmlinux.h file with the structs needed with the fields the
tools need, marking the structs with __attribute__((preserve_access_index)),
so that libbpf's CO-RE code can fixup the struct field offsets.
In some cases the vmlinux.h file that was being generated by bpftool
from the kernel BTF information was not needed at all, just including
linux/bpf.h, sometimes linux/perf_event.h was enough as non-UAPI
types were not being used.
To keep te patch small, include those UAPI headers from the trimmed down
vmlinux.h file, that then provides the tools with just the structs and
the subset of its fields needed for them.
Testing it:
# perf lock contention -b find / > /dev/null
^C contended total wait max wait avg wait type caller
7 53.59 us 10.86 us 7.66 us rwlock:R start_this_handle+0xa0
2 30.35 us 21.99 us 15.17 us rwsem:R iterate_dir+0x52
1 9.04 us 9.04 us 9.04 us rwlock:W start_this_handle+0x291
1 8.73 us 8.73 us 8.73 us spinlock raw_spin_rq_lock_nested+0x1e
#
# perf lock contention -abl find / > /dev/null
^C contended total wait max wait avg wait address symbol
1 262.96 ms 262.96 ms 262.96 ms ffff8e67502d0170 (mutex)
12 244.24 us 39.91 us 20.35 us ffff8e6af56f8070 mmap_lock (rwsem)
7 30.28 us 6.85 us 4.33 us ffff8e6c865f1d40 rq_lock (spinlock)
3 7.42 us 4.03 us 2.47 us ffff8e6c864b1d40 rq_lock (spinlock)
2 3.72 us 2.19 us 1.86 us ffff8e6c86571d40 rq_lock (spinlock)
1 2.42 us 2.42 us 2.42 us ffff8e6c86471d40 rq_lock (spinlock)
4 2.11 us 559 ns 527 ns ffffffff9a146c80 rcu_state (spinlock)
3 1.45 us 818 ns 482 ns ffff8e674ae8384c (rwlock)
1 870 ns 870 ns 870 ns ffff8e68456ee060 (rwlock)
1 663 ns 663 ns 663 ns ffff8e6c864f1d40 rq_lock (spinlock)
1 573 ns 573 ns 573 ns ffff8e6c86531d40 rq_lock (spinlock)
1 472 ns 472 ns 472 ns ffff8e6c86431740 (spinlock)
1 397 ns 397 ns 397 ns ffff8e67413a4f04 (spinlock)
#
# perf test offcpu
95: perf record offcpu profiling tests : Ok
#
# perf kwork latency --use-bpf
Starting trace, Hit <Ctrl+C> to stop and report
^C
Kwork Name | Cpu | Avg delay | Count | Max delay | Max delay start | Max delay end |
--------------------------------------------------------------------------------------------------------------------------------
(w)flush_memcg_stats_dwork | 0000 | 1056.212 ms | 2 | 2112.345 ms | 550113.229573 s | 550115.341919 s |
(w)toggle_allocation_gate | 0000 | 10.144 ms | 62 | 416.389 ms | 550113.453518 s | 550113.869907 s |
(w)0xffff8e6748e28080 | 0002 | 0.623 ms | 1 | 0.623 ms | 550110.989841 s | 550110.990464 s |
(w)vmstat_shepherd | 0000 | 0.586 ms | 10 | 2.828 ms | 550111.971536 s | 550111.974364 s |
(w)vmstat_update | 0007 | 0.363 ms | 5 | 1.634 ms | 550113.222520 s | 550113.224154 s |
(w)vmstat_update | 0000 | 0.324 ms | 10 | 2.827 ms | 550111.971526 s | 550111.974354 s |
(w)0xffff8e674c5f4a58 | 0002 | 0.102 ms | 5 | 0.134 ms | 550110.989839 s | 550110.989972 s |
(w)psi_avgs_work | 0001 | 0.086 ms | 3 | 0.107 ms | 550114.957852 s | 550114.957959 s |
(w)psi_avgs_work | 0000 | 0.079 ms | 5 | 0.100 ms | 550118.605668 s | 550118.605768 s |
(w)kfree_rcu_monitor | 0006 | 0.079 ms | 1 | 0.079 ms | 550110.925821 s | 550110.925900 s |
(w)psi_avgs_work | 0004 | 0.079 ms | 1 | 0.079 ms | 550109.581835 s | 550109.581914 s |
(w)psi_avgs_work | 0001 | 0.078 ms | 1 | 0.078 ms | 550109.197809 s | 550109.197887 s |
(w)psi_avgs_work | 0002 | 0.077 ms | 5 | 0.086 ms | 550110.669819 s | 550110.669905 s |
<SNIP>
# strace -e bpf -o perf-stat-bpf-counters.output perf stat -e cycles --bpf-counters sleep 1
Performance counter stats for 'sleep 1':
6,197,983 cycles
1.003922848 seconds time elapsed
0.000000000 seconds user
0.002032000 seconds sys
# head -7 perf-stat-bpf-counters.output
bpf(BPF_OBJ_GET, {pathname="/sys/fs/bpf/perf_attr_map", bpf_fd=0, file_flags=0}, 16) = 3
bpf(BPF_OBJ_GET_INFO_BY_FD, {info={bpf_fd=3, info_len=88, info=0x7ffcead64990}}, 16) = 0
bpf(BPF_MAP_LOOKUP_ELEM, {map_fd=3, key=0x24129e0, value=0x7ffcead65a48, flags=BPF_ANY}, 32) = 0
bpf(BPF_LINK_GET_FD_BY_ID, {link_id=1252}, 12) = -1 ENOENT (No such file or directory)
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65780, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0,
+func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0}, 116) = 4
bpf(BPF_PROG_LOAD, {prog_type=BPF_PROG_TYPE_SOCKET_FILTER, insn_cnt=2, insns=0x7ffcead65920, license="GPL", log_level=0, log_size=0, log_buf=NULL, kern_version=KERNEL_VERSION(0, 0, 0), prog_flags=0, prog_name="", prog_ifindex=0, expected_attach_type=BPF_CGROUP_INET_INGRESS, prog_btf_fd=0, func_info_rec_size=0,
+func_info=NULL, func_info_cnt=0, line_info_rec_size=0, line_info=NULL, line_info_cnt=0, attach_btf_id=0, attach_prog_fd=0, fd_array=NULL}, 128) = 4
bpf(BPF_BTF_LOAD, {btf="\237\353\1\0\30\0\0\0\0\0\0\0\20\0\0\0\20\0\0\0\5\0\0\0\1\0\0\0\0\0\0\1"..., btf_log_buf=NULL, btf_size=45, btf_log_size=0, btf_log_level=0}, 28) = 4
#
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Co-developed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/lkml/ZFU1PJrn8YtHIqno@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It seems that perf stat -b <prog id> doesn't produce any results:
$ perf stat -e cycles -b 4 -I 10000 -vvv
Control descriptor is not initialized
cycles: 0 0 0
time counts unit events
10.007641640 <not supported> cycles
Looks like this happens because fentry/fexit progs are getting loaded, but the
corresponding perf event is not enabled and not added into the events bpf map.
I think there is some mixing up between two type of bpf support, one for bperf
and one for bpf_profiler. Both are identified via evsel__is_bpf, based on which
perf events are enabled, but for the latter (bpf_profiler) a perf event is
required. Using evsel__is_bperf to check only bperf produces expected results:
$ perf stat -e cycles -b 4 -I 10000 -vvv
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
size 136
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3
------------------------------------------------------------
[...perf_event_attr for other CPUs...]
------------------------------------------------------------
cycles: 309426 169009 169009
time counts unit events
10.010091271 309426 cycles
The final numbers correspond (at least in the level of magnitude) to the
same metric obtained via bpftool.
Fixes: 112cb56164bc2108 ("perf stat: Introduce config stat.bpf-counter-events")
Reviewed-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Tested-by: Song Liu <song@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230412182316.11628-1-9erthalion6@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We already know that `frames` is greater than zero, because we just
checked it. So we don't need to check the loop condition on the first
iteration.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230505155244.2312199-7-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Inline the remaining call of snd_pcm_playback_hw_avail(). This makes
the top-up branch more congruent with the thresholded one, and allows
simplifying the handling of the corner cases.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230505155244.2312199-6-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The code tracking the added samples in thresholded mode and the code
tracking the just played samples in top-up mode are semantically
identical, so factor it out to a common function to enhance readability.
Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230505155244.2312199-5-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The removed condition handles de facto only one situation where
runtime->silence_filled variable is equal to runtime->buffer_size,
because this variable cannot go over the buffer size. This case is
implicitly caught by the required comparison of the noise distance
with the threshold.
Suggested-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Link: https://lore.kernel.org/r/20230505155244.2312199-4-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 9a826ddba6e ("[ALSA] pcm core: fix silence_start calculations")
came with exactly the right commit message, but the patch just made
things broken in a different way: We'd fill at a too low address if the
area was already partially zeroed, so we'd under-fill. This affected
both thresholded mode (where it was somewhat less likely) and top-up
mode (where it would be the case consistently).
Co-developed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230505155244.2312199-3-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
Arnaud Pouliquen
Arnd Bergmann
Uwe Kleine-König
Linus Torvalds
Arnaldo Carvalho de Melo
Keith Busch
Tony Battersby
Christoph Hellwig
Ryusuke Konishi
Jan Kara
Lorenzo Stoakes
Matthew Wilcox
Lukas Bulwahn
Ian Rogers
Dmitrii Dolgov
Oswald Buddenhagen
Jaroslav Kysela