aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2022-10-05docs: networking: phy: add missing spaceCasper Andersson1-1/+1
Missing space between "pins'" and "strength" Signed-off-by: Casper Andersson <casper.casan@gmail.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20221004073242.304425-1-casper.casan@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05net: pse-pd: PSE_REGULATOR should depend on REGULATORGeert Uytterhoeven1-0/+1
The Regulator based PSE controller driver relies on regulator support to be enabled. If regulator support is disabled, it will still compile fine, but won't operate correctly. Hence add a dependency on REGULATOR, to prevent asking the user about this driver when configuring a kernel without regulator support. Fixes: 66741b4e94ca7bb1 ("net: pse-pd: add regulator based PSE driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/709caac8873ff2a8b72b92091429be7c1a939959.1664900558.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05Revert "net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs"Vladimir Oltean1-5/+3
taprio_attach() has this logic at the end, which should have been removed with the blamed patch (which is now being reverted): /* access to the child qdiscs is not needed in offload mode */ if (FULL_OFFLOAD_IS_ENABLED(q->flags)) { kfree(q->qdiscs); q->qdiscs = NULL; } because otherwise, we make use of q->qdiscs[] even after this array was deallocated, namely in taprio_leaf(). Therefore, whenever one would try to attach a valid child qdisc to a fully offloaded taprio root, one would immediately dereference a NULL pointer. $ tc qdisc replace dev eno0 handle 8001: parent root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ max-sdu 0 0 0 0 0 200 0 0 \ base-time 200 \ sched-entry S 80 20000 \ sched-entry S a0 20000 \ sched-entry S 5f 60000 \ flags 2 $ max_frame_size=1500 $ data_rate_kbps=20000 $ port_transmit_rate_kbps=1000000 $ idleslope=$data_rate_kbps $ sendslope=$(($idleslope - $port_transmit_rate_kbps)) $ locredit=$(($max_frame_size * $sendslope / $port_transmit_rate_kbps)) $ hicredit=$(($max_frame_size * $idleslope / $port_transmit_rate_kbps)) $ tc qdisc replace dev eno0 parent 8001:7 cbs \ idleslope $idleslope \ sendslope $sendslope \ hicredit $hicredit \ locredit $locredit \ offload 0 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 pc : taprio_leaf+0x28/0x40 lr : qdisc_leaf+0x3c/0x60 Call trace: taprio_leaf+0x28/0x40 tc_modify_qdisc+0xf0/0x72c rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c The solution is not as obvious as the problem. The code which deallocates q->qdiscs[] is in fact copied and pasted from mqprio, which also deallocates the array in mqprio_attach() and never uses it afterwards. Therefore, the identical cleanup logic of priv->qdiscs[] that mqprio_destroy() has is deceptive because it will never take place at qdisc_destroy() time, but just at raw ops->destroy() time (otherwise said, priv->qdiscs[] do not last for the entire lifetime of the mqprio root), but rather, this is just the twisted way in which the Qdisc API understands error path cleanup should be done (Qdisc_ops :: destroy() is called even when Qdisc_ops :: init() never succeeded). Side note, in fact this is also what the comment in mqprio_init() says: /* pre-allocate qdisc, attachment can't fail */ Or reworded, mqprio's priv->qdiscs[] scheme is only meant to serve as data passing between Qdisc_ops :: init() and Qdisc_ops :: attach(). [ this comment was also copied and pasted into the initial taprio commit, even though taprio_attach() came way later ] The problem is that taprio also makes extensive use of the q->qdiscs[] array in the software fast path (taprio_enqueue() and taprio_dequeue()), but it does not keep a reference of its own on q->qdiscs[i] (you'd think that since it creates these Qdiscs, it holds the reference, but nope, this is not completely true). To understand the difference between taprio_destroy() and mqprio_destroy() one must look before commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), because that just muddied the waters. In the "original" taprio design, taprio always attached itself (the root Qdisc) to all netdev TX queues, so that dev_qdisc_enqueue() would go through taprio_enqueue(). It also called qdisc_refcount_inc() on itself for as many times as there were netdev TX queues, in order to counter-balance what tc_get_qdisc() does when destroying a Qdisc (simplified for brevity below): if (n->nlmsg_type == RTM_DELQDISC) err = qdisc_graft(dev, parent=NULL, new=NULL, q, extack); qdisc_graft(where "new" is NULL so this deletes the Qdisc): for (i = 0; i < num_q; i++) { struct netdev_queue *dev_queue; dev_queue = netdev_get_tx_queue(dev, i); old = dev_graft_qdisc(dev_queue, new); if (new && i > 0) qdisc_refcount_inc(new); qdisc_put(old); ~~~~~~~~~~~~~~ this decrements taprio's refcount once for each TX queue } notify_and_destroy(net, skb, n, classid, rtnl_dereference(dev->qdisc), new); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ and this finally decrements it to zero, making qdisc_put() call qdisc_destroy() The q->qdiscs[] created using qdisc_create_dflt() (or their replacements, if taprio_graft() was ever to get called) were then privately freed by taprio_destroy(). This is still what is happening after commit 13511704f8d7 ("net: taprio offload: enforce qdisc to netdev queue mapping"), but only for software mode. In full offload mode, the per-txq "qdisc_put(old)" calls from qdisc_graft() now deallocate the child Qdiscs rather than decrement taprio's refcount. So when notify_and_destroy(taprio) finally calls taprio_destroy(), the difference is that the child Qdiscs were already deallocated. And this is exactly why the taprio_attach() comment "access to the child qdiscs is not needed in offload mode" is deceptive too. Not only the q->qdiscs[] array is not needed, but it is also necessary to get rid of it as soon as possible, because otherwise, we will also call qdisc_put() on the child Qdiscs in qdisc_destroy() -> taprio_destroy(), and this will cause a nasty use-after-free/refcount-saturate/whatever. In short, the problem is that since the blamed commit, taprio_leaf() needs q->qdiscs[] to not be freed by taprio_attach(), while qdisc_destroy() -> taprio_destroy() does need q->qdiscs[] to be freed by taprio_attach() for full offload. Fixing one problem triggers the other. All of this can be solved by making taprio keep its q->qdiscs[i] with a refcount elevated at 2 (in offloaded mode where they are attached to the netdev TX queues), both in taprio_attach() and in taprio_graft(). The generic qdisc_graft() would just decrement the child qdiscs' refcounts to 1, and taprio_destroy() would give them the final coup de grace. However the rabbit hole of changes is getting quite deep, and the complexity increases. The blamed commit was supposed to be a bug fix in the first place, and the bug it addressed is not so significant so as to justify further rework in stable trees. So I'd rather just revert it. I don't know enough about multi-queue Qdisc design to make a proper judgement right now regarding what is/isn't idiomatic use of Qdisc concepts in taprio. I will try to study the problem more and come with a different solution in net-next. Fixes: 1461d212ab27 ("net/sched: taprio: make qdisc_leaf() see the per-netdev-queue pfifo child qdiscs") Reported-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reported-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Link: https://lore.kernel.org/r/20221004220100.1650558-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-05net/ieee802154: don't warn zero-sized raw_sendmsg()Tetsuo Handa1-0/+4
syzbot is hitting skb_assert_len() warning at __dev_queue_xmit() [1], for PF_IEEE802154 socket's zero-sized raw_sendmsg() request is hitting __dev_queue_xmit() with skb->len == 0. Since PF_IEEE802154 socket's zero-sized raw_sendmsg() request was able to return 0, don't call __dev_queue_xmit() if packet length is 0. ---------- #include <sys/socket.h> #include <netinet/in.h> int main(int argc, char *argv[]) { struct sockaddr_in addr = { .sin_family = AF_INET, .sin_addr.s_addr = htonl(INADDR_LOOPBACK) }; struct iovec iov = { }; struct msghdr hdr = { .msg_name = &addr, .msg_namelen = sizeof(addr), .msg_iov = &iov, .msg_iovlen = 1 }; sendmsg(socket(PF_IEEE802154, SOCK_RAW, 0), &hdr, 0); return 0; } ---------- Note that this might be a sign that commit fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len") should be reverted, for skb->len == 0 was acceptable for at least PF_IEEE802154 socket. Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4 [1] Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com> Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221005014750.3685555-2-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-10-05Revert "net/ieee802154: reject zero-sized raw_sendmsg()"Alexander Aring1-3/+0
This reverts commit 3a4d061c699bd3eedc80dc97a4b2a2e1af83c6f5. There is a v2 which does return zero if zero length is given. Signed-off-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221005014750.3685555-1-aahringo@redhat.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-10-03eth: pse: add missing static inlinesJakub Kicinski1-6/+6
build bot reports missing 'static inline' qualifiers in the header. Reported-by: kernel test robot <lkp@intel.com> Fixes: 18ff0bcda6d1 ("ethtool: add interface to interact with Ethernet Power Equipment") Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20221004040327.2034878-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03once: rename _SLOW to _SLEEPABLEJason A. Donenfeld3-26/+26
The _SLOW designation wasn't really descriptive of anything. This is meant to be called from process context when it's possible to sleep. So name this more aptly _SLEEPABLE, which better fits its intended use. Fixes: 62c07983bef9 ("once: add DO_ONCE_SLOW() for sleepable contexts") Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20221003181413.1221968-1-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: pse-pd: add regulator based PSE driverOleksij Rempel3-0/+160
Add generic, regulator based PSE driver to support simple Power Sourcing Equipment without automatic classification support. This driver was tested on 10Bast-T1L switch with regulator based PoDL PSE. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controllerOleksij Rempel2-0/+73
Add bindings for the regulator based Ethernet PoDL PSE controller and generic bindings for all PSE controllers. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03ethtool: add interface to interact with Ethernet Power EquipmentOleksij Rempel10-1/+449
Add interface to support Power Sourcing Equipment. At current step it provides generic way to address all variants of PSE devices as defined in IEEE 802.3-2018 but support only objects specified for IEEE 802.3-2018 104.4 PoDL Power Sourcing Equipment (PSE). Currently supported and mandatory objects are: IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl This is minimal interface needed to control PSE on each separate ethernet port but it provides not all mandatory objects specified in IEEE 802.3-2018. Since "PoDL PSE" and "PSE" have similar names, but some different values I decide to not merge them and keep separate naming schema. This should allow as to be as close to IEEE 802.3 spec as possible and avoid name conflicts in the future. This implementation is connected to PHYs instead of MACs because PSE auto classification can potentially interfere with PHY auto negotiation. So, may be some extra PHY related initialization will be needed. With WIP version of ethtools interaction with PSE capable link looks as following: $ ip l ... 5: t1l1@eth0: <BROADCAST,MULTICAST> .. ... $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: disabled PoDL PSE Power Detection Status: disabled $ ethtool --set-pse t1l1 podl-pse-admin-control enable $ ethtool --show-pse t1l1 PSE attributs for t1l1: PoDL PSE Admin State: enabled PoDL PSE Power Detection Status: delivering power Signed-off-by: kernel test robot <lkp@intel.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: mdiobus: search for PSE nodes by parsing PHY nodes.Oleksij Rempel3-2/+39
Some PHYs can be linked with PSE (Power Sourcing Equipment), so search for related nodes and attach it to the phydev. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: mdiobus: fwnode_mdiobus_register_phy() rework error handlingOleksij Rempel1-9/+12
Rework error handling as preparation for PSE patch. This patch should make it easier to extend this function. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: add framework to support Ethernet PSE and PDs devicesOleksij Rempel6-0/+341
This framework was create with intention to provide support for Ethernet PSE (Power Sourcing Equipment) and PDs (Powered Device). At current step this patch implements generic PSE support for PoDL (Power over Data Lines 802.3bu) specification with reserving name space for PD devices as well. This framework can be extended to support 802.3af and 802.3at "Power via the Media Dependent Interface" (or PoE/Power over Ethernet) Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03dt-bindings: net: phy: add PoDL PSE propertyOleksij Rempel1-0/+6
Add property to reference node representing a PoDL Power Sourcing Equipment. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03[brown paperbag] fix coredump breakageAl Viro1-1/+2
Let me count the ways in which I'd screwed up: * when emitting a page, handling of gaps in coredump should happen before fetching the current file position. * fix for a problem that occurs on rather uncommon setups (and hadn't been observed in the wild) had been sent very late in the cycle. * ... with badly insufficient testing, introducing an easily reproducible breakage. Without giving it time to soak in -next. Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk> Reported-by: "J. R. Okajima" <hooanon05g@gmail.com> Tested-by: "J. R. Okajima" <hooanon05g@gmail.com> Fixes: 06bbaa6dc53c "[coredump] don't use __kernel_write() on kmap_local_page()" Cc: stable@kernel.org # v6.0-only Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-10-03net: marvell: prestera: Propagate nh state from hw to kernelYevhen Orlov2-0/+114
We poll nexthops in HW and call for each active nexthop appropriate neighbour. Also we provide implicity neighbour resolving. For example, user have added nexthop route: # ip route add 5.5.5.5 via 1.1.1.2 But neighbour 1.1.1.2 doesn't exist. In this case we will try to call neigh_event_send, even if there is no traffic. This is useful, when you have add route, which will be used after some time but with a lot of traffic (burst). So, we has prepared, offloaded route in advance. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: marvell: prestera: Add neighbour cache accountingYevhen Orlov2-3/+797
Move forward and use new PRESTERA_FIB_TYPE_UC_NH to provide basic nexthop routes support. Provide deinitialization sequence for all created router objects. Limitations: - Only "local" and "main" tables supported - Only generic interfaces supported for router (no bridges or vlans) Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: marvell: prestera: add stub handler neighbour eventsYevhen Orlov2-0/+60
Actual handler will be added in next patches Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: marvell: prestera: Add heplers to interact with fib_notifier_infoYevhen Orlov1-34/+65
This will be used to implement nexthops related logic in next patches. Also try to keep ipv4/6 abstraction to be able to reuse helpers for ipv6 in the future. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: marvell: prestera: Add length macros for prestera_ip_addrYevhen Orlov1-0/+2
Add macros to determine IP address length (internal driver types). This will be used in next patches for nexthops logic. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: marvell: prestera: add delayed wq and flush wq on deinitYevhen Orlov3-0/+14
Flushing workqueues ensures, that no more pending works, related to just unregistered or deinitialized notifiers. After that we can free memory. Delayed wq will be used for neighbours in next patches. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: marvell: prestera: Add strict cleanup of fib arbiterYevhen Orlov1-1/+41
This will, ensure, that there is no more, preciously allocated fib_cache entries left after deinit. Will be used to free allocated resources of nexthop routes, that points to "not our" port (e.g. eth0). Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: marvell: prestera: Add cleanup of allocated fib_nodesYevhen Orlov1-0/+12
Do explicity cleanup on router_hw_fini, to ensure, that all allocated objects cleaned. This will be used in cases, when upper layer (cache) is not mapped to router_hw layer. Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: marvell: prestera: Add router nexthops ABIYevhen Orlov6-8/+582
- Add functions to allocate/delete/set nexthop group - NOTE: non-ECMP nexthop is nexthop group with allocated size = 1 - Add function to read state of HW nh (if packets going through it) Co-developed-by: Taras Chornyi <tchornyi@marvell.com> Signed-off-by: Taras Chornyi <tchornyi@marvell.com> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03eth: octeon: fix build after netif_napi_add() changesJakub Kicinski1-2/+2
Guenter reports I missed a netif_napi_add() call in one of the platform-specific drivers: drivers/net/ethernet/cavium/octeon/octeon_mgmt.c: In function 'octeon_mgmt_probe': drivers/net/ethernet/cavium/octeon/octeon_mgmt.c:1399:9: error: too many arguments to function 'netif_napi_add' 1399 | netif_napi_add(netdev, &p->napi, octeon_mgmt_napi_poll, | ^~~~~~~~~~~~~~ Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: b48b89f9c189 ("net: drop the weight argument from netif_napi_add") Link: https://lore.kernel.org/r/20221002175650.1491124-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5: E-Switch, Return EBUSY if can't get mode lockJianbo Liu1-1/+1
It is to avoid tc retrying during device mode change. Signed-off-by: Jianbo Liu <jianbol@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5: E-switch, Don't update group if qos is not enabledChris Mi1-1/+5
Currently, qos group will be updated and qos will be enabled when unregistering devlink port. Actually no need to update group if qos is not enabled. Add a check to prevent unnecessary enabling and disabling qos for every port. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5: E-Switch, Allow offloading fwd dest flow table with vportRoi Dayan1-7/+9
Before this commit a fwd dest flow table resulted in ignoring vport dests which is incorrect and is supported. With this commit the dests can be a mix of flow table and vport dests. There is still a limitation that there cannot be more than one flow table dest. Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5: Set default grace period based on function typeMaher Sanalla1-2/+16
Currently, driver sets the same grace period for fw fatal health reporter to any type of function. Since the lower level functions are more vulnerable to fw fatal errors as a result of parent function closure/reload, set a smaller grace period for the lower level functions, as follows: 1. For ECPF: 180 seconds. 2. For PF: 60 seconds. 3. For VF/SF: 30 seconds. Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5: Start health poll at earlier stage of driver loadMoshe Shemesh3-10/+19
Start health poll at earlier stage, so if fw fatal issue occurred before or during initialization commands such as init_hca or set_hca_cap the poll health can detect and indicate that the driver is already in error state. Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: Expose rx_oversize_pkts_buffer counterGal Pressman4-4/+32
Add the rx_oversize_pkts_buffer counter to ethtool statistics. This counter exposes the number of dropped received packets due to length which arrived to RQ and exceed software buffer size allocated by the device for incoming traffic. It might imply that the device MTU is larger than the software buffers size. Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Optimize for unaligned mode with 3072-byte framesMaxim Mikityanskiy4-3/+61
When XSK frame size is 3072 (or another power of two multiplied by 3), KLM mechanism for NIC virtual memory page mapping can be optimized by replacing it with KSM. Before this change, two KLM entries were needed to map an XSK frame that is not a power of two: one entry maps the UMEM memory up to the frame length, the other maps the rest of the stride to the garbage page. When the frame length divided by 3 is a power of two, it can be mapped using 3 KSM entries, and the fourth will map the rest of the stride to the garbage page. All 4 KSM entries are of the same size, which allows for a much faster lookup. Frame size 3072 is useful in certain use cases, because it allows packing 4 frames into 3 pages. Generally speaking, other frame sizes equal to PAGE_SIZE minus a power of two can be optimized in a similar way, but it will require many more KSMs per frame, which slows down UMRs a little bit, but more importantly may hit the limit for the maximum number of KSM entries. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Print a warning in slow configurationsMaxim Mikityanskiy1-0/+9
On striding RQ, when the XSK frame size doesn't match the MKey page size, KLM is used for memory mappings, which is a slower mechanism than MTT or KSM. It may happen in two cases: 1. Frame size is not a power of two (only possible in the unaligned mode of XSK). 2. Frame size is 2048 bytes, and the firmware doesn't support MKey pages smaller than 4096 bytes. Depending on the case, print a warning and recommend to disable striding RQ or upgrade the firmware. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Use KLM to protect frame overrun in unaligned modeMaxim Mikityanskiy4-10/+90
XSK RQs support striding RQ linear mode, but the stride size may be bigger than the XSK frame size, because: 1. The stride size must be a power of two. 2. The stride size must be equal to the UMR page size. Each XSK frame is treated as a separate page, because they aren't necessarily adjacent in physical memory, so the driver can't put more than one stride per page. 3. The minimal MTT page size is 4096 on older firmware. That means that if XSK frame size is 2048 or not a power of two, the strides may be bigger than XSK frames. Normally, it's not a problem if the hardware enforces the MTU. However, traffic between vports skips the hardware MTU check, and oversized packets may be received. If an oversized packet is bigger than the XSK frame but not bigger than the stride, it will cause overwriting of the adjacent UMEM region. If the packet takes more than one stride, they can be recycled for reuse, so it's not a problem when the XSK frame size matches the stride size. Work around the above issue by leveraging KLM to make a more fine-grained mapping. The beginning of each stride is mapped to the frame memory, and the padding up to the closest power of two is mapped to the overflow page that doesn't belong to UMEM. This way, application data corruption won't happen upon receiving packets bigger than MTU. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: Improve MTT/KSM alignmentMaxim Mikityanskiy5-16/+18
Make mlx5e_mpwrq_mtts_per_wqe take into account that KSM requires smaller alignment than MTT. Ensure that there is always an even amount of MTTs in a UMR WQE, so that complete octwords are formed, and no garbage is mapped. Drop extra alignment in MLX5_MTT_OCTW that may cause setting too big ucseg->xlt_octowords, also leading to mapping garbage. Generalize some calculations by introducing the MLX5_OCTWORD constant. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Use umr_mode to calculate striding RQ parametersMaxim Mikityanskiy7-72/+171
Instead of passing the unaligned flag, pass an enum that indicates the UMR mode. The next commit will add the third mode (KLM for certain configurations of XSK), which will be added to this enum instead of adding another bool flag everywhere. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Improve need_wakeup logicMaxim Mikityanskiy4-37/+23
XSK need_wakeup mechanism allows the driver to stop busy waiting for buffers when the fill ring is empty, yield to the application and signal it that the driver needs to be waken up after the application refills the fill ring. Add protection against the race condition on the RX (refill) side: if the application refills buffers after xskrq->post_wqes is called, but before mlx5e_xsk_update_rx_wakeup, NAPI will exit, skipping taking these buffers to the hardware WQ, and the application won't wake it up again. Optimize the whole need_wakeup logic, removing unneeded flows, to compensate for this new check. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Include XSK skb_from_cqe callbacks in INDIRECT_CALLMaxim Mikityanskiy1-2/+4
XSK is a performance-critical data path. To avoid an indirect function call with a retpoline, include XSK callbacks in the INDIRECT_CALL macro, so that they are called directly in XSK flows. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Set napi_id to support busy pollingMaxim Mikityanskiy1-1/+1
xdp_rxq_info_reg should get the actual napi_id, not 0, in order to support socket busy polling properly. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net/mlx5e: xsk: Flush RQ on XSK activation to save memoryMaxim Mikityanskiy3-5/+19
The regular RQ remains open after opening an XSK socket, in order to guarantee that closing the XSK socket never fails due to an error when reopening the regular RQ. To save memory, the regular RQ can be deactivated and flushed, releasing all pages, when an XSK socket is open. Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: mvpp2: fix mvpp2 debugfs leakRussell King (Oracle)3-3/+21
When mvpp2 is unloaded, the driver specific debugfs directory is not removed, which technically leads to a memory leak. However, this directory is only created when the first device is probed, so the hardware is present. Removing the module is only something a developer would to when e.g. testing out changes, so the module would be reloaded. So this memory leak is minor. The original attempt in commit fe2c9c61f668 ("net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()") that was labelled as a memory leak fix was not, it fixed a refcount leak, but in doing so created a problem when the module is reloaded - the directory already exists, but mvpp2_root is NULL, so we lose all debugfs entries. This fix has been reverted. This is the alternative fix, where we remove the offending directory whenever the driver is unloaded. Fixes: 21da57a23125 ("net: mvpp2: add a debugfs interface for the Header Parser") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/E1ofOAB-00CzkG-UO@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: ipa: update copyrightsAlex Elder36-36/+36
Some source files state copyright dates that are earlier than the last modification of the file. Change the copyright year to 2022 in all such cases. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220930224549.3503434-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: ipa: update commentsAlex Elder8-94/+75
This patch just updates comments throughout the IPA code. Transaction state is now tracked using indexes into an array rather than linked lists, and a few comments refer to the "old way" of doing things. The description of how transactions are used was changed to refer to "operations" rather than "commands", to (hopefully) remove a possible ambiguity. IPA register offsets and fields are now handled differently as well, and the register documentation is updated to better describe the code. A few minor updates to comments were made (e.g., adding a missing word, fixing a typo or punctuation, etc.). Finally, the local macro atomic_dec_not_zero() is no longer used, so it is deleted. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20220930224527.3503404-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03r8152: Rate limit overflow messagesAndrew Gaul1-1/+3
My system shows almost 10 million of these messages over a 24-hour period which pollutes my logs. Signed-off-by: Andrew Gaul <gaul@google.com> Link: https://lore.kernel.org/r/20221002034128.2026653-1-gaul@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: lan966x: Fix return type of lan966x_port_xmitNathan Huckleberry1-1/+2
The ndo_start_xmit field in net_device_ops is expected to be of type netdev_tx_t (*ndo_start_xmit)(struct sk_buff *skb, struct net_device *dev). The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of lan966x_port_xmit should be changed from int to netdev_tx_t. Reported-by: Dan Carpenter <error27@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: llvm@lists.linux.dev Signed-off-by: Nathan Huckleberry <nhuck@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20220929182704.64438-1-nhuck@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-03net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.cLorenzo Bianconi5-52/+106
Remove circular dependency between nf_nat module and nf_conntrack one moving bpf_ct_set_nat_info kfunc in nf_nat_bpf.c Fixes: 0fabd2aa199f ("net: netfilter: add bpf_ct_set_nat_info kfunc helper") Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Yauheni Kaliuta <ykaliuta@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/51a65513d2cda3eeb0754842e8025ab3966068d8.1664490511.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-03Documentation: bpf: Add implementation notes documentations to table of contentsBagas Sanjaya1-0/+2
Sphinx reported warnings on missing implementation notes documentations in the table of contents: Documentation/bpf/clang-notes.rst: WARNING: document isn't included in any toctree Documentation/bpf/linux-notes.rst: WARNING: document isn't included in any toctree Add these documentations to the table of contents (index.rst) of BPF documentation to fix the warnings. Link: https://lore.kernel.org/linux-doc/202210020749.yfgDZbRL-lkp@intel.com/ Fixes: 6c7aaffb24efbd ("bpf, docs: Move Clang notes to a separate file") Fixes: 6166da0a02cde2 ("bpf, docs: Move legacy packet instructions to a separate file") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20221002032022.24693-1-bagasdotme@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-10-03once: add DO_ONCE_SLOW() for sleepable contextsEric Dumazet3-2/+60
Christophe Leroy reported a ~80ms latency spike happening at first TCP connect() time. This is because __inet_hash_connect() uses get_random_once() to populate a perturbation table which became quite big after commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16") get_random_once() uses DO_ONCE(), which block hard irqs for the duration of the operation. This patch adds DO_ONCE_SLOW() which uses a mutex instead of a spinlock for operations where we prefer to stay in process context. Then __inet_hash_connect() can use get_random_slow_once() to populate its perturbation table. Fixes: 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16") Fixes: 190cc82489f4 ("tcp: change source port randomizarion at connect() time") Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu> Link: https://lore.kernel.org/netdev/CANn89iLAEYBaoYajy0Y9UmGFff5GPxDUoG-ErVB2jDdRNQ5Tug@mail.gmail.com/T/#t Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net/ieee802154: reject zero-sized raw_sendmsg()Tetsuo Handa1-0/+3
syzbot is hitting skb_assert_len() warning at raw_sendmsg() for ieee802154 socket. What commit dc633700f00f726e ("net/af_packet: check len when min_header_len equals to 0") does also applies to ieee802154 socket. Link: https://syzkaller.appspot.com/bug?extid=5ea725c25d06fb9114c4 Reported-by: syzbot <syzbot+5ea725c25d06fb9114c4@syzkaller.appspotmail.com> Fixes: fd1894224407c484 ("bpf: Don't redirect packets with invalid pkt_len") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-03net: wwan: iosm: Call mutex_init before locking itMaxim Mikityanskiy1-2/+3
wwan_register_ops calls wwan_create_default_link, which ends up in the ipc_wwan_newlink callback that locks ipc_wwan->if_mutex. However, this mutex is not yet initialized by that point. Fix it by moving mutex_init above the wwan_register_ops call. This also makes the order of operations in ipc_wwan_init symmetric to ipc_wwan_deinit. Fixes: 83068395bbfc ("net: iosm: create default link via WWAN core") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.