| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
when `echo $cmd > control` contains multiple queries, extra query
separators (;\n) can parse as empty statements. This is normal, and a
vpr-info on an empty command is just noise.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20211013220726.1280565-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On qemu --smp 3 runs, remove-module can get called 3 times.
So don't print on entry; instead print "removed" after entry is
found and removed, so just once.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20211013220726.1280565-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When adding some stuff to the header file we must not rely on
implicit dependencies that are happen by luck or bugs in other
headers. Hence fwnode.h needs to use bits.h directly.
Fixes: c2c724c868c4 ("driver core: Add fw_devlink_parse_fwtree()")
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211013143707.80222-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Jim pointed out that using $module.dyndbg= is always a more flexible
choice for using dynamic debug on the command line. The $module.dyndbg
style is checked at boot and handles if $module is a builtin. If it is
actually a loadable module, it is handled again later when the module is
loaded.
If you just use dyndbg="module $module +p" dynamic debug is only enabled
when $module is a builtin.
It was recommended to illustrate wildcard usage as well.
Suggested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-4-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This param has been deprecated for a very long time now, let's rip it
out.
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-3-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Right now dyndbg shows up as an unknown parameter if used on boot:
Unknown command line parameters: dyndbg=+p
That's because it is unknown, it doesn't sit in the __param
section, so the processing done to warn users supplying an unknown
parameter doesn't think it is legitimate.
Install a dummy handler to register it. dynamic debug needs to search
the whole command line for modules listed that are currently builtin,
so there's no real work to be done in this callback.
Fixes: 86d1919a4fb0 ("init: print out unknown kernel parameters")
Tested-by: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jason Baron <jbaron@akamai.com>
Link: https://lore.kernel.org/r/1634139622-20667-2-git-send-email-jbaron@akamai.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dynamic_debug_exec_queries() accepts a separate module arg (so it can
support $module.dyndbg boot arg), display that in the vpr-info for a
more useful user-debug context.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20211012183310.1016678-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If one ends up expanding on this line checkpatch will complain that the
combination S_IRWXU|S_IRUGO|S_IXUGO should just be replaced with the
octal 0755. Do that.
This makes no functional changes.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927163805.808907-9-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Right now firmware_request_builtin() is used internally only
and so we have control over the callers. But if we want to expose
that API more broadly we should ensure the firmware pointer
is valid.
This doesn't fix any known issue, it just prepares us to later
expose this API to other users.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-4-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are two ways the firmware_loader can use the built-in
firmware: with or without the pre-allocated buffer. We already
have one explicit use case for each of these, and so split them
up so that it is clear what the intention is on the caller side.
This also paves the way so that eventually other callers outside
of the firmware loader can uses these if and when needed.
While at it, adopt the firmware prefix for the routine names.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-3-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The firmware_loader can be used with a pre-allocated buffer
through the use of the API calls:
o request_firmware_into_buf()
o request_partial_firmware_into_buf()
If the firmware was built-in and present, our current check
for if the built-in firmware fits into the pre-allocated buffer
does not return any errors, and we proceed to tell the caller
that everything worked fine. It's a lie and no firmware would
end up being copied into the pre-allocated buffer. So if the
caller trust the result it may end up writing a bunch of 0's
to a device!
Fix this by making the function that checks for the pre-allocated
buffer return non-void. Since the typical use case is when no
pre-allocated buffer is provided make this return successfully
for that case. If the built-in firmware does *not* fit into the
pre-allocated buffer size return a failure as we should have
been doing before.
I'm not aware of users of the built-in firmware using the API
calls with a pre-allocated buffer, as such I doubt this fixes
any real life issue. But you never know... perhaps some oddball
private tree might use it.
In so far as upstream is concerned this just fixes our code for
correctness.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some What entries here use cpu# as a wildcard, while others
use, instead, cpuX.
As scripts/get_abi.pl doesn't consider "#" as a wildcard,
replace:
cpu# -> cpuX
inside the file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/60b1a79189d1a9d9f1c9c9c299770e69b18972fd.1632994837.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Uppercase letters X, Y and Z are handled as wildcards by
scripts/get_abi.pl.
We can't do that with lowercase letters, as they're used
everywhere.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/2dfd3f80cea2d0501f6451f2e66000b00fda3346.1632994837.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Such ABI symbol is currently not described. Document it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a14f98e1b23ea14cf14da3c3169955343ec28bbe.1632994837.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the ABI attributes documentation from:
Documentation/hwmon/sysfs-interface.rst
in order for it to follow the usual ABI documentation. That
allows script/get_abi.pl to properly handle it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5f47619ed882b0b8d1c84b56f7ea17bac0854b77.1632994837.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Changeset 62fdac5913f7 ("x86, mce: Add boot options for corrected errors")
added three more MCE files that are also exposed currently via
sysfs.
Document them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/f9c13aff3f5a2cae0d4495eccd17f431f3a4c55a.1632994837.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reduce the gap of missing ABIs for Intel servers with MCE
by adding a new ABI file.
The contents of this file comes from:
Documentation/x86/x86_64/machinecheck.rst
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/801a26985e32589eb78ba4b728d3e19fdea18f04.1632994837.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Using repeating sequencies of .* seem to slow down the
processing speed on some cases. Also, currently, a "."
character is not properly handled as such.
Change the way regexes are created, in order to produce
better search expressions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c69c01c12b1b30466177dcb17e45f833fb47713d.1632994565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The rule that falls back to the long regex list is wrong:
it is just running again the same loop it did before.
change it to look at the "others" table.
That slows the processing speed, but provides a better
list of undefined symbols.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a3ba919e9a9208a5f012a13c9674c362a9d73169.1632994565.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If one ends up extending this line checkpatch will complain about the
use of S_IRWXUGO suggesting it is not preferred and that 0777
should be used instead. Take the tip from checkpatch and do that
change before we do our subsequent changes.
This makes no functional changes.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210927163805.808907-8-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
component.c hasn't use any macro or function declared in linux/kref.h.
Thus, these files can be removed from component.c safely without
affecting the compilation of the drivers/base/ module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Link: https://lore.kernel.org/r/20210928193849.28717-1-liumh1@shanghaitech.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
arch_topology.c hasn't use any macro or function declared in linux/percpu.h,
linux/smp.h and linux/string.h.
Thus, these files can be removed from arch_topology.c safely without
affecting the compilation of the drivers/base/ module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Link: https://lore.kernel.org/r/20210928193138.24192-1-liumh1@shanghaitech.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use the proper macro instead of hard-coded (-1) value.
Suggested-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20211004133453.18881-2-mgurtovoy@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Don't use (-1) constant for setting initial device node. Instead, use
the generic NUMA_NO_NODE definition to indicate that "no node id
specified".
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Link: https://lore.kernel.org/r/20211004133453.18881-1-mgurtovoy@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
I got memory leak as follows:
unreferenced object 0xffff88801f0b2200 (size 64):
comm "i2c-lis2hh12-21", pid 5455, jiffies 4294944606 (age 15.224s)
hex dump (first 32 bytes):
72 65 67 75 6c 61 74 6f 72 3a 72 65 67 75 6c 61 regulator:regula
74 6f 72 2e 30 2d 2d 69 32 63 3a 31 2d 30 30 31 tor.0--i2c:1-001
backtrace:
[<00000000bf5b0c3b>] __kmalloc_track_caller+0x19f/0x3a0
[<0000000050da42d9>] kvasprintf+0xb5/0x150
[<000000004bbbed13>] kvasprintf_const+0x60/0x190
[<00000000cdac7480>] kobject_set_name_vargs+0x56/0x150
[<00000000bf83f8e8>] dev_set_name+0xc0/0x100
[<00000000cc1cf7e3>] device_link_add+0x6b4/0x17c0
[<000000009db9faed>] _regulator_get+0x297/0x680
[<00000000845e7f2b>] _devm_regulator_get+0x5b/0xe0
[<000000003958ee25>] st_sensors_power_enable+0x71/0x1b0 [st_sensors]
[<000000005f450f52>] st_accel_i2c_probe+0xd9/0x150 [st_accel_i2c]
[<00000000b5f2ab33>] i2c_device_probe+0x4d8/0xbe0
[<0000000070fb977b>] really_probe+0x299/0xc30
[<0000000088e226ce>] __driver_probe_device+0x357/0x500
[<00000000c21dda32>] driver_probe_device+0x4e/0x140
[<000000004e650441>] __device_attach_driver+0x257/0x340
[<00000000cf1891b8>] bus_for_each_drv+0x166/0x1e0
When device_register() returns an error, the name allocated in dev_set_name()
will be leaked, the put_device() should be used instead of kfree() to give up
the device reference, then the name will be freed in kobject_cleanup() and the
references of consumer and supplier will be decreased in device_link_release_fn().
Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210930085714.2057460-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
In commit b212921b13bd ("elf: don't use MAP_FIXED_NOREPLACE for elf
executable mappings") we still leave MAP_FIXED_NOREPLACE in place for
load_elf_interp.
Unfortunately, this will cause kernel to fail to start with:
1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already
Failed to execute /init (error -17)
The reason is that the elf interpreter (ld.so) has overlapping segments.
readelf -l ld-2.31.so
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000
0x000000000002c94c 0x000000000002c94c R E 0x10000
LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0
0x00000000000021e8 0x0000000000002320 RW 0x10000
LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00
0x00000000000011ac 0x0000000000001328 RW 0x10000
The reason for this problem is the same as described in commit
ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments").
Not only executable binaries, elf interpreters (e.g. ld.so) can have
overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go
back to MAP_FIXED in load_elf_interp.
Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map")
Cc: <stable@vger.kernel.org> # v4.19
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The objtool warning that the kvm instruction emulation code triggered
wasn't very useful:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
in that it helpfully tells you which symbol name it had trouble figuring
out the relocation for, but it doesn't actually say what the unknown
symbol type was that triggered it all.
In this case it was because of missing type information (type 0, aka
STT_NOTYPE), but on the whole it really should just have printed that
out as part of the message.
Because if this warning triggers, that's very much the first thing you
want to know - why did reloc2sec_off() return failure for that symbol?
So rather than just saying you can't handle some type of symbol without
saying what the type _was_, just print out the type number too.
Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The recent change to make objtool aware of more symbol relocation types
(commit 24ff65257375: "objtool: Teach get_alt_entry() about more
relocation types") also added another check, and resulted in this
objtool warning when building kvm on x86:
arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception
The reason seems to be that kvm_fastop_exception() is marked as a global
symbol, which causes the relocation to ke kept around for objtool. And
at the same time, the kvm_fastop_exception definition (which is done as
an inline asm statement) doesn't actually set the type of the global,
which then makes objtool unhappy.
The minimal fix is to just not mark kvm_fastop_exception as being a
global symbol. It's only used in that one compilation unit anyway, so
it was always pointless. That's how all the other local exception table
labels are done.
I'm not entirely happy about the kinds of games that the kvm code plays
with doing its own exception handling, and the fact that it confused
objtool is most definitely a symptom of the code being a bit too subtle
and ad-hoc. But at least this trivial one-liner makes objtool no longer
upset about what is going on.
Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In cachefiles_mark_object_buried, the dentry in question may not have an
owner, and thus our cachefiles_object pointer may be NULL when calling
the tracepoint, in which case we will also not have a valid debug_id to
print in the tracepoint.
Check for NULL object in the tracepoint and if so, just set debug_id to
MAX_UINT as was done in 2908f5e101e3 ("fscache: Add a cookie debug ID
and use that in traces").
This fixes the following oops:
FS-Cache: Cache "mycache" added (type cachefiles)
CacheFiles: File cache on vdc registered
...
Workqueue: fscache_object fscache_object_work_func [fscache]
RIP: 0010:trace_event_raw_event_cachefiles_mark_buried+0x4e/0xa0 [cachefiles]
....
Call Trace:
cachefiles_mark_object_buried+0xa5/0xb0 [cachefiles]
cachefiles_bury_object+0x270/0x430 [cachefiles]
cachefiles_walk_to_object+0x195/0x9c0 [cachefiles]
cachefiles_lookup_object+0x5a/0xc0 [cachefiles]
fscache_look_up_object+0xd7/0x160 [fscache]
fscache_object_work_func+0xb2/0x340 [fscache]
process_one_work+0x1f1/0x390
worker_thread+0x53/0x3e0
kthread+0x127/0x150
Fixes: 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
5.15-rc1 crashes with blank screen when booting up on two ThinkPads
using i915. Bisections converge convincingly, but arrive at different
and suprising "culprits", none of them the actual culprit.
netconsole (with init_netconsole() hacked to call i915_init() when
logging has started, instead of by module_init()) tells the story:
kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245!
with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify().
I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that
function needs to be 4-byte aligned.
Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation")
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If driver read tmp value sufficient for
(tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().
The patch fixes possible NULL pointer dereference by removing lm75[].
Found by Linux Driver Verification project (linuxtesting.org).
Cc: stable@vger.kernel.org
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210921155153.28098-3-lutovinova@ispras.ru
[groeck: Dropped unnecessary continuation lines, fixed multi-line alignments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If driver read val value sufficient for
(val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().
The patch fixes possible NULL pointer dereference by removing lm75[].
Found by Linux Driver Verification project (linuxtesting.org).
Cc: stable@vger.kernel.org
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210921155153.28098-2-lutovinova@ispras.ru
[groeck: Dropped unnecessary continuation lines, fixed multipline alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
If driver read val value sufficient for
(val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().
The patch fixes possible NULL pointer dereference by removing lm75[].
Found by Linux Driver Verification project (linuxtesting.org).
Cc: stable@vger.kernel.org
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210921155153.28098-1-lutovinova@ispras.ru
[groeck: Dropped unnecessary continuation lines, fixed multi-line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add missed attribute for reading POUT from page 1.
It is supported by device, but has been missed in initial commit.
Fixes: 2c6fcbb21149 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927070740.2149290-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The bytes for max_power_out from the ibm-cffps devices differ in byte
order for some power supplies.
The Witherspoon power supply returns the bytes in MSB/LSB order.
The Rainier power supply returns the bytes in LSB/MSB order.
The Witherspoon power supply uses version cffps1. The Rainier power
supply should use version cffps2. If version is cffps1, swap the bytes
before output to max_power_out.
Tested:
Witherspoon before: 3148. Witherspoon after: 3148.
Rainier before: 53255. Rainier after: 2000.
Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210928205051.1222815-1-bjwyman@gmail.com
[groeck: Replaced yoda programming]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The P10 (temp sensor version 0x10) doesn't do the same VRM status
reporting that was used on P9. It just reports the temperature, so
drop the check for VRM fru type in the sysfs show function, and don't
set the name to "alarm".
Fixes: db4919ec86 ("hwmon: (occ) Add new temperature sensor type")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210929153604.14968-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Because Rui is now going to focus on work that is not related to the
maintenance of the thermal subsystem in the kernel, Rafael will start
to help Daniel with handling the development process as a new member
of the thermal maintainers team. Rui will continue to review patches
in that area.
The thermal development process flow will change so that the material
from the thermal git tree will be merged into the thermal branch of
the linux-pm.git tree before going into the mainline.
Update the information in MAINTAINERS accordingly.
Signed-off-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We have never supported fasync properly, it would only fire when there
is something polling io_uring making it useless. The original support came
in through the initial io_uring merge for 5.1. Since it's broken and
nobody has reported it, get rid of the fasync bits.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2f7ca3d344d406d34fa6713824198915c41cea86.1633080236.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
vmlinux.o: warning: objtool: check_preemption_disabled()+0x81: call to is_percpu_thread() leaves .noinstr.text section
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210928084218.063371959@infradead.org
|
|
This patch null-terminates the temporary buffer in sched_scaling_write()
so kstrtouint() does not return failure and checks the value is valid.
Before:
$ cat /sys/kernel/debug/sched/tunable_scaling
1
$ echo 0 > /sys/kernel/debug/sched/tunable_scaling
-bash: echo: write error: Invalid argument
$ cat /sys/kernel/debug/sched/tunable_scaling
1
After:
$ cat /sys/kernel/debug/sched/tunable_scaling
1
$ echo 0 > /sys/kernel/debug/sched/tunable_scaling
$ cat /sys/kernel/debug/sched/tunable_scaling
0
$ echo 3 > /sys/kernel/debug/sched/tunable_scaling
-bash: echo: write error: Invalid argument
Fixes: 8a99b6833c88 ("sched: Move SCHED_DEBUG sysctl to debugfs")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210927114635.GH3959@techsingularity.net
|
|
Since commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to
list on unthrottle") we add cfs_rqs with no runnable tasks but not fully
decayed into the load (leaf) list. We may ignore adding some ancestors
and therefore breaking tmp_alone_branch invariant. This broke LTP test
cfs_bandwidth01 and it was partially fixed in commit fdaba61ef8a2
("sched/fair: Ensure that the CFS parent is added after unthrottling").
I noticed the named test still fails even with the fix (but with low
probability, 1 in ~1000 executions of the test). The reason is when
bailing out of unthrottle_cfs_rq early, we may miss adding ancestors of
the unthrottled cfs_rq, thus, not joining tmp_alone_branch properly.
Fix this by adding ancestors if we notice the unthrottled cfs_rq was
added to the load list.
Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210917153037.11176-1-mkoutny@suse.com
|
|
Users of rdpmc rely on the mmapped user page to calculate accurate
time_enabled. Currently, userpage->time_enabled is only updated when the
event is added to the pmu. As a result, inactive event (due to counter
multiplexing) does not have accurate userpage->time_enabled. This can
be reproduced with something like:
/* open 20 task perf_event "cycles", to create multiplexing */
fd = perf_event_open(); /* open task perf_event "cycles" */
userpage = mmap(fd); /* use mmap and rdmpc */
while (true) {
time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */
time_enabled_read = read(fd).time_enabled;
if (time_enabled_mmap > time_enabled_read)
BUG();
}
Fix this by updating userpage for inactive events in merge_sched_in.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-and-tested-by: Lucian Grijincu <lucian@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com
|
|
According to the latest event list, the event encoding 0xEF is only
available on the first 4 counters. Add it into the event constraints
table.
Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1632842343-25862-1-git-send-email-kan.liang@linux.intel.com
|
|
perf_init_event tries multiple init callbacks and does not reset the
event state between tries. When x86_pmu_event_init runs, it
unconditionally sets the destroy callback to hw_perf_event_destroy. On
the next init attempt after x86_pmu_event_init, in perf_try_init_event,
if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy
callback will be run. However, if the next init didn't set the destroy
callback, hw_perf_event_destroy will be run (since the callback wasn't
reset).
Looking at other pmu init functions, the common pattern is to only set
the destroy callback on a successful init. Resetting the callback on
failure tries to replicate that pattern.
This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend
PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second)
run of the perf tool after a reboot results in 0 samples being
generated. The extra run of hw_perf_event_destroy results in
active_events having an extra decrement on each perf run. The second run
has active_events == 0 and every subsequent run has active_events < 0.
When active_events == 0, the NMI handler will early-out and not record
any samples.
Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid
|
|
Occasionally objtool encounters symbol (as opposed to section)
relocations in .altinstructions. Typically they are the alternatives
written by elf_add_alternative() as encountered on a noinstr
validation run on vmlinux after having already ran objtool on the
individual .o files.
Basically this is the counterpart of commit 44f6a7c0755d ("objtool:
Fix seg fault with Clang non-section symbols"), because when these new
assemblers (binutils now also does this) strip the section symbols,
elf_add_reloc_to_insn() is forced to emit symbol based relocations.
As such, teach get_alt_entry() about different relocation types.
Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/YVWUvknIEVNkPvnP@hirez.programming.kicks-ass.net
|
|
Commit 8e33fadf945a ("ext4: remove an unnecessary if statement in
__ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again
under buffer lock, which may overwrite the buffer if someone else have
already brought it uptodate and changed it.
Fixes: 8e33fadf945a ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()")
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com
|
|
When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry. For example:
1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
!= ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
only fill one dirent because the hash of the entry in block1(besides
the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
will fail, and since we has got the one entry, ksys_getdents64 can
return success
7. Latter we will trapped in a loop with step 4~6
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
|
|
The error path in ext4_fill_super forget to flush s_error_work before
journal destroy, and it may trigger the follow bug since
flush_stashed_error_work can run concurrently with journal destroy
without any protection for sbi->s_journal.
[32031.740193] EXT4-fs (loop66): get root inode failed
[32031.740484] EXT4-fs (loop66): mount failed
[32031.759805] ------------[ cut here ]------------
[32031.759807] kernel BUG at fs/jbd2/transaction.c:373!
[32031.760075] invalid opcode: 0000 [#1] SMP PTI
[32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded
4.18.0
[32031.765112] Call Trace:
[32031.765375] ? __switch_to_asm+0x35/0x70
[32031.765635] ? __switch_to_asm+0x41/0x70
[32031.765893] ? __switch_to_asm+0x35/0x70
[32031.766148] ? __switch_to_asm+0x41/0x70
[32031.766405] ? _cond_resched+0x15/0x40
[32031.766665] jbd2__journal_start+0xf1/0x1f0 [jbd2]
[32031.766934] jbd2_journal_start+0x19/0x20 [jbd2]
[32031.767218] flush_stashed_error_work+0x30/0x90 [ext4]
[32031.767487] process_one_work+0x195/0x390
[32031.767747] worker_thread+0x30/0x390
[32031.768007] ? process_one_work+0x390/0x390
[32031.768265] kthread+0x10d/0x130
[32031.768521] ? kthread_flush_work_fn+0x10/0x10
[32031.768778] ret_from_fork+0x35/0x40
static int start_this_handle(...)
BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this
Besides, after we enable fast commit, ext4_fc_replay can add work to
s_error_work but return success, so the latter journal destroy in
ext4_load_journal can trigger this problem too.
Fix this problem with two steps:
1. Call ext4_commit_super directly in ext4_handle_error for the case
that called from ext4_fc_replay
2. Since it's hard to pair the init and flush for s_error_work, we'd
better add a extras flush_work before journal destroy in
ext4_fill_super
Besides, this patch will call ext4_commit_super in ext4_handle_error for
any nojournal case too. But it seems safe since the reason we call
schedule_work was that we should save error info to sb through journal
if available. Conversely, for the nojournal case, it seems useless delay
commit superblock to s_error_work.
Fixes: c92dc856848f ("ext4: defer saving error info from atomic context")
Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available")
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com
|
|
We should use unsigned long long rather than loff_t to avoid
overflow in ext4_max_bitmap_size() for comparison before returning.
w/o this patch sbi->s_bitmap_maxbytes was becoming a negative
value due to overflow of upper_limit (with has_huge_files as true)
Below is a quick test to trigger it on a 64KB pagesize system.
sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2
sudo mount /dev/loop2 /mnt
sudo echo "hello" > /mnt/hello -> This will error out with
"echo: write error: File too large"
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
Jim Cromie
Andy Shevchenko
Andrew Halaney
Luis Chamberlain
Mauro Carvalho Chehab
Mianhan Liu
Max Gurtovoy
Yang Yingliang
Linus Torvalds
Chen Jingwen
Dave Wysochanski
Hugh Dickins
Nadezda Lutovinova
Vadim Pasternak
Brandon Wyman
Eddie James
Rafael J. Wysocki
Pavel Begunkov
Peter Zijlstra
Mel Gorman
Michal Koutný
Song Liu
Kan Liang
Anand K Mistry
Zhang Yi
yangerkun
Ritesh Harjani