aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2024-07-01arm64: dts: imx93-11x11-evk: reorder lpi2c2, lpi2c3, mu1 and mu2 labelJoy Zou1-148/+148
Reorder lpi2c2, lpi2c3, mu1 and mu2 label in alphabetical order. Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx93-11x11-evk: fix duplicated lpi2c3 labelsJoy Zou1-14/+7
Move node "rtc@53" to existed "&lpi2c3" and remove redundant "&lpi2c3" label. Signed-off-by: Joy Zou <joy.zou@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp: Fix pgc vpu locationsAdam Ford1-27/+28
The various pgv_vpu nodes have a mismatch between the value after the @ symbol and what is referenced by 'reg' so reorder the nodes to align. Fixes: df680992dd62 ("arm64: dts: imx8mp: add vpu pgc nodes") Suggested-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Adam Ford <aford173@gmail.com> Reviewd-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp-venice-gw74xx: add DP83867 configurationTim Harvey1-0/+24
The GW7400 has an onboard DP83867 RGMII GbE PHY: - add RGMII delay and FIFO configuration - add LED configuration required to use them via netdev trigger: two LED's (LED1 and LED2, skipping LED0). Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp-venice-gw702x: add support for PHY LED'sTim Harvey1-0/+20
The GW702x SoM has an onboard DP83867 RGMII GbE PHY that drives two LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to allow these PHY LED's to be controlled via a netdev trigger. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mm-venice-gw700x: add support for PHY LED'sTim Harvey1-0/+20
The GW700x SoM has an onboard DP83867 RGMII GbE PHY that drives two LED's (LED1 and LED2, skipping LED0). Add the appropriate dt bindings to allow these PHY LED's to be controlled via a netdev trigger. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: freescale: imx8m*-venice-*: fix gw,gsc dt-schema warningsTim Harvey5-10/+0
Fix the dt-schema warnings due to #address-cells/#size-cells being unnecessary when there are no children with reg cells. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8mp: Fix pgc_mlmix locationAdam Ford1-17/+17
The pgc_mlmix shows a power-domain@24, but the reg value is IMX8MP_POWER_DOMAIN_MLMIX which is set to 4. The stuff after the @ symbol should match the stuff referenced by 'reg' so reorder the pgc_mlmix so it to appear as power-domain@4. Fixes: 834464c8504c ("arm64: dts: imx8mp: add mlmix power domain") Fixes: 4bedc468b725 ("arm64: dts: imx8mp: Add NPU Node") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: imx8dxl-evk: add imx8dxl_cm4, lsio mu5, related memory regionFrank Li1-0/+48
Add imx8dxl_cm4, lsio mu5 and related memory region. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-07-01arm64: dts: freescale: add TQMa8MPQL on MBa8MP-RAS314Martin Schmiedel2-0/+907
This adds support for TQMa8MPQL module on MBa8MP-RAS314 board. Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27arm64: dts: imx8dxl-ss-conn: add gpmi nandFrank Li1-0/+11
Update gpmi nand and dma_apbh interrupt number for imx8dxl. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-27arm64: dts: imx8-ss-conn: add gpmi nand nodeFrank Li1-0/+69
Add gpmi nand support. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: Support i.MX93 9x9 Quick Start BoardPeng Fan2-0/+493
Add the board device tree with sdhc1/2, cm33, mu, lpuart1, lpi2c1/2, usb enabled and etc, which to support the i.MX 93 quick start evaluation kit that provides a low-cost platform to evaluate the i.MX 93 applications processors in a 9x9mm package. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8qm-mek: fix gpio number for reg_usdhc2_vmmcFrank Li1-1/+1
The gpio in "reg_usdhc2_vmmc" should be 7 instead of 19. Cc: stable@vger.kernel.org Fixes: 307fd14d4b14 ("arm64: dts: imx: add imx8qm mek support") Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: add i.MX95 19x19 EVK minimal board dtsPeng Fan2-0/+201
Add a minimal dts for i.MX95 19x19 EVK board: - lpuart1 as console - sdhc1/2 as storage Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: add i.MX95 basic dtsiPeng Fan4-0/+2141
i.MX95 features 6 A55 Cores, ARM Mali GPU, ISP, ML acceleration NPU, and Edgelock secure enclave security. This patch is to add a minimal dtsi, with cpu cores, scmi, gic, uart, mu, sdhc, lpi2c added. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8mm-iot-gateway: Add initial supportFabio Estevam3-0/+898
Add the initial support for the CompuLab i.MX8MM IoT Gateway board, which is based on the Compulab's UCM-iMX8M-Mini SoM. Board URL: https://www.compulab.com/products/iot-gateways/iot-gate-imx8-industrial-arm-iot-gateway/ SoM URL: https://www.compulab.com/products/computer-on-modules/ucm-imx8m-mini-nxp-i-mx-8m-mini-som-system-on-module-computer/ Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: layerscape: change thermal node nameFrank Li5-23/+23
Add thermal subfix for thermal node name to fix DTB_CHECK warning: thermal-zones: '...' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: layerscape: Change node name from 'esdhc' to 'mmc'Frank Li6-10/+10
Use common node name 'mmc' to fix DTB_CHECK warning. Add compatible string 'fsl,ls2080a-esdhc' for fsl-lx2160a. arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: esdhc@1560000: $nodename:0: 'esdhc@1560000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: esdhc@1560000: $nodename:0: 'esdhc@1560000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dtb: esdhc@1560000: $nodename:0: 'esdhc@1560000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: esdhc@2140000: $nodename:0: 'esdhc@2140000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dtb: esdhc@2140000: $nodename:0: 'esdhc@2140000' does not match '^mmc(@.*)?$' arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: esdhc@2140000: compatible:0: 'fsl,esdhc' is not one of ['fsl,mpc8536-esdhc', 'fsl,mpc8378-esdhc', 'fsl,p2020-esdhc', 'fsl,p4080-esdhc', 'fsl,t1040-esdhc', 'fsl,t4240-esdhc', 'fsl,ls1012a-esdhc', 'fsl,ls1028a-esdhc', 'fsl,ls1088a-esdhc', 'fsl,ls1043a-esdhc', 'fsl,ls1046a-esdhc', 'fsl,ls2080a-esdhc'] from schema $id: http://devicetree.org/schemas/mmc/fsl,esdhc.yaml# arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtb: esdhc@2140000: $nodename:0: 'esdhc@2140000' does not match '^mmc(@.*)?$' Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8mp-msc-sm2s: Add HDMI outputLuca Ceresoli1-0/+27
Enable the HDMI output of the MSC SM2-MB-EP1 carrier board based the SM2S-IMX8PLUS SMARC module. Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: imx8mp-verdin: add HDMI supportFrancesco Dolcini7-7/+160
Enable HDMI output on Verdin iMX8MP on all the supported carrier boards (dev, dahlia, mallow and yavia). HDMI DDC I2C is used in regular I2C mode, see link on the related dt-bindings patch. Fix CEC and HPD pinctrl, having a pull-down on HPD and a pull-up on CEC. Link: https://lore.kernel.org/all/20240515062753.111746-1-marex@denx.de/ Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8mp-debix-model-a: Enable HDMI outputChristopher Obbard1-0/+47
Enable the HDMI output on the Debix Model A SBC, using the HDMI encoder present in the i.MX8MP SoC. This has been tested with a generic 1080p HDMI display, along with a smaller 1280x800 HDMI display. Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: imx8: use defines for interruptsKrzysztof Kozlowski2-2/+2
Replace hard-coded interrupt flags with standard defines for readability. No changes in resulting DTBs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: ls208xa: use defines for timer interruptsKrzysztof Kozlowski1-4/+4
Replace hard-coded interrupt parts (GIC, flags) with standard defines for readability. No changes in resulting DTBs. The comment was saying interrupt was active low, but the actual used value was active high, so assume that the code, not the comment, is correct. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-17arm64: dts: freescale: use defines for interruptsKrzysztof Kozlowski9-181/+181
Replace hard-coded interrupt parts (GIC, flags) with standard defines for readability. No changes in resulting DTBs. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls1028a-rdb: Add EEPROM nodes to I2C busMike Looijmans1-0/+31
The LS1028ARDB board contains three EEPROM devices, for storing boot code, DDR SPD and board information. Add the missing entries to the devicetree. Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: freescale: imx8mm-verdin: enable hysteresis on slow input pinMax Krummenacher1-1/+1
SODIMM 17 can be used as an edge triggered interrupt supplied from an off board source. Enable hysteresis on the pinmuxing to increase immunity against noise on the signal. Fixes: 60f01b5b5c7d ("arm64: dts: imx8mm-verdin: update iomux configuration") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: imx8mp-beacon-kit: Fix errors found from CHECK_DTBSAdam Ford1-2/+8
The adv7535 has some unnecessary entries which can be removed since they were not setup properly anyway and the defaults work just fine. Removing them and adding some required regulators make the errors detected from CHECK_DTBS go away: reg-names:1: 'edid' was expected reg-names:2: 'cec' was expected 'avdd-supply' is a required property 'dvdd-supply' is a required property 'pvdd-supply' is a required property 'a2vdd-supply' is a required property 'v3p3-supply' is a required property Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls2160a: Change I2C clock name to ipg to fix DTB_CHECK warningFrank Li1-8/+8
dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c" to fix below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dtb: i2c@2010000: clock-names:0: 'ipg' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls208xa: Change I2C clock name to ipg to fix DTB_CHECK warningFrank Li1-4/+4
dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c" to fix below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dtb: i2c@2000000: clock-names:0: 'ipg' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls1043a: Change I2C clock name to ipg to fix DTB_CHECK warningFrank Li1-4/+4
dt_binding require I2C's clock name is "ipg". Change it to "ipg" from "i2c" to fix below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: i2c@2190000: clock-names:0: 'ipg' was expecte Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: ls1012a: Reorder sai dma-names to clean up DTB_CHECK warningFrank Li1-6/+6
Change order of sai's dma-names to clearn up below DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b50000: dma-names:1: 'tx' was expected arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dtb: sai@2b60000: dma-names:1: 'tx' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: imx93-11x11-evk: Remove the 'no-sdio' propertyFabio Estevam1-1/+0
The usdhc2 port is connected to the microSD slot. The presence of the 'no-sdio' property prevents Wifi SDIO cards, such as CMP9010-X-EVB [1] to be detected. Remove the 'no-sdio' property so that SDIO cards could also work. [1] https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/cmp9010-x-evb-iw416-usd-interface-evaluation-board:CMP9010-X-EVB Fixes: e37907bd8294 ("arm64: dts: freescale: add i.MX93 11x11 EVK basic support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: imx8mp: Add imx8mp-specific irqsteer compatibleAlexander Stein1-1/+1
i.MX8MP irqsteer has power-domain support, so use a dedicated compatible. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: freescale: imx8mp-verdin: don't limit i2c2 max. clockMax Krummenacher1-2/+1
Verdin I2C2 may be used to access other I2C devices apart from serving as an HDMI DDC channel. Thus do not limit the used I2C clock frequency to 10kHz in the module specific device tree part. If an overlay configures i2c2 as DDC the overlay is also responsible to cope with an appropriate I2C clock. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: freescale: imx8mm-verdin: don't limit i2c2 max. clockMax Krummenacher1-1/+1
Verdin I2C2 may be used to access other I2C devices apart from serving as an HDMI DDC channel. Thus do not limit the used I2C clock frequency to 10kHz in the module specific device tree part. If an overlay configures i2c2 as DDC the overlay is also responsible to cope with an appropriate I2C clock. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: phygate-tauri-l: add overlays for RS232 and RS485Parthiban Nallathambi4-0/+197
UART2 and UART4 can used in following combination, 2 x RS232: - UART2 and UART4 without flow control - MUX selection GPIO3_20 must be held low 1 x RS232 + 1 x RS485: - UART2 - RS232 - UART4 - RS485 - MUX selection GPIO3_20 must be held high - RE/DE for RS485 controlled with GPIO3_25 1 x RS232 with flow control: - UART2 - RS232 - MUX selection GPIO3_20 must be held low Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-16arm64: dts: phygate-tauri-l: enable pcie phyParthiban Nallathambi1-0/+10
I210 intel ethernet controller is connected to PCIe. Enable the PHY to use the ethernet controller. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix BT shutdown GPIOTim Harvey1-1/+1
Fix the invalid BT shutdown GPIO (gpio1_io3 not gpio4_io16) Fixes: 716ced308234 ("arm64: dts: freescale: Add imx8mp-venice-gw73xx-2x") Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: freescale: ls1028a: Reorder sai dma-names to fix warningFrank Li1-18/+18
Reorder the SAI dma-names to ensure "rx" precedes "tx" as required to fixes the DTB_CHECK warning. arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: audio-controller@f100000: dma-names:1: 'tx' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,sai.yaml# arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: audio-controller@f110000: dma-names:1: 'tx' was expected Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: freescale: ls1028a: Remove undocumented 'fsl,ls-pcie-ep'Frank Li1-2/+2
Remove the undocumented compatible string 'fsl,ls-pcie-ep' property from the ls1028a device tree source to fix DTB_CHECK warnings. arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb: pcie-ep@3400000: compatible: ['fsl,ls1028a-pcie-ep', 'fsl,ls-pcie-ep'] is too long from schema $id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml# Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mq-librem5: Don't wake up on volume key pressGuido Günther1-2/+0
The only key that should wake up the phone is power button press. This prevents accidental wakeup due to e.g. pressing the buttons in the pocket or backpack and is in line what userspace uses to unblank the device. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Remove unused ocram nodeAlexander Stein1-5/+0
This node is unused and origins from downstream kernel where it is used for the DSP. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm: dts: imx53-qsb-hdmi: Disable panel instead of deleting nodeLiu Ying2-3/+5
We cannot use /delete-node/ directive to delete a node in a DT overlay. The node won't be deleted effectively. Instead, set the node's status property to "disabled" to achieve something similar. Fixes: eeb403df953f ("ARM: dts: imx53-qsb: add support for the HDMI expander") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp: Enable HDMI on i.MX8MP DHCOM PDK2 and PDK3Marek Vasut2-0/+78
Enable HDMI output on i.MX8MP DHCOM PDK2 and PDK3. The I2C5 on PDK2 and I2C mux port 1 on PDK3 respectively are used in regular I2C mode instead of HDMI DDC mode to permit connection of other I2C devices on those buses. The pinctrl_hdmi node is part of the SoM DTSI already. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp: Fix TC9595 input clock on DH i.MX8M Plus DHCOM SoMMarek Vasut1-1/+1
The IMX8MP_CLK_CLKOUT2 supplies the TC9595 bridge with 13 MHz reference clock. The IMX8MP_CLK_CLKOUT2 is supplied from IMX8MP_AUDIO_PLL2_OUT. The IMX8MP_CLK_CLKOUT2 operates only as a power-of-two divider, and the current 156 MHz is not power-of-two divisible to achieve 13 MHz. To achieve 13 MHz output from IMX8MP_CLK_CLKOUT2, set IMX8MP_AUDIO_PLL2_OUT to 208 MHz, because 208 MHz / 16 = 13 MHz. Fixes: 20d0b83e712b ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM") Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp-evk: add bt-sco sound card supportShengjiu Wang1-0/+44
Add bt-sco sound card, which is used by BT HFP case. It supports wb profile as default Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-15arm64: dts: imx8mp: Initialize audio PLLs from audiomix subsystemShengjiu Wang1-0/+3
Initialize audio PLL1 as the parent clock for 8kHz series rates, audio PLL2 as the parent clock for 11kHz series rates. that PLL1 and PLL2 can together support full range of audio sample rates. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: imx8mp-evk: Add MX8-DLVDS-LCD1 display module supportLiu Ying3-0/+99
MX8-DLVDS-LCD1 display module integrates a KOE TX26D202VM0BWA LCD panel and a touch IC. Add an overlay to support the LCD panel on i.MX8MP EVK. Specify 148.5MHz clock frequency in panel-timing node to accommodate 3.5-fold 519.75MHz media_ldb clock which is derived from 1.0395GHz video_pll1 clock. Signed-off-by: Liu Ying <victor.liu@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-06-03arm64: dts: freescale: imx8mm-verdin: Fix GPU speedJoao Paulo Goncalves1-0/+1
The GPU clock was reduced on iMX8MM SOC device tree to prevent boards that don't support GPU overdrive from being out of specification. However, this caused a regression in GPU speed for the Verdin iMX8MM, which does support GPU overdrive. This patch fixes this by enabling overdrive mode in the SOM dtsi. Fixes: 1f794d3eed53 ("arm64: dts: imx8mm: Reduce GPU to nominal speed") Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.