| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When building a kernel with many debug options enabled (which happens in
test configurations use by myself and syzbot), the kernel can become
large enough that portions of .text can be more than 128M away from
.idmap.text (which is placed inside the .rodata section). Where idmap
code branches into .text, the linker will place veneers in the
.idmap.text section to make those branches possible.
Unfortunately, as Ard reports, GNU LD has bseen observed to add 4K of
padding when adding such veneers, e.g.
| .idmap.text 0xffffffc01e48e5c0 0x32c arch/arm64/mm/proc.o
| 0xffffffc01e48e5c0 idmap_cpu_replace_ttbr1
| 0xffffffc01e48e600 idmap_kpti_install_ng_mappings
| 0xffffffc01e48e800 __cpu_setup
| *fill* 0xffffffc01e48e8ec 0x4
| .idmap.text.stub
| 0xffffffc01e48e8f0 0x18 linker stubs
| 0xffffffc01e48f8f0 __idmap_text_end = .
| 0xffffffc01e48f000 . = ALIGN (0x1000)
| *fill* 0xffffffc01e48f8f0 0x710
| 0xffffffc01e490000 idmap_pg_dir = .
This makes the __idmap_text_start .. __idmap_text_end region bigger than
the 4K we require it to fit within, and triggers an assertion in arm64's
vmlinux.lds.S, which breaks the build:
| LD .tmp_vmlinux.kallsyms1
| aarch64-linux-gnu-ld: ID map text too big or misaligned
| make[1]: *** [scripts/Makefile.vmlinux:35: vmlinux] Error 1
| make: *** [Makefile:1264: vmlinux] Error 2
Avoid this by using an `ADRP+ADD+BLR` sequence for branches out of
.idmap.text, which avoids the need for veneers. These branches are only
executed once per boot, and only when the MMU is on, so there should be
no noticeable performance penalty in replacing `BL` with `ADRP+ADD+BLR`.
At the same time, remove the "x" and "w" attributes when placing code in
.idmap.text, as these are not necessary, and this will prevent the
linker from assuming that it is safe to place PLTs into .idmap.text,
causing it to warn if and when there are out-of-range branches within
.idmap.text, e.g.
| LD .tmp_vmlinux.kallsyms1
| arch/arm64/kernel/head.o: in function `primary_entry':
| (.idmap.text+0x1c): relocation truncated to fit: R_AARCH64_CALL26 against symbol `dcache_clean_poc' defined in .text section in arch/arm64/mm/cache.o
| arch/arm64/kernel/head.o: in function `init_el2':
| (.idmap.text+0x88): relocation truncated to fit: R_AARCH64_CALL26 against symbol `dcache_clean_poc' defined in .text section in arch/arm64/mm/cache.o
| make[1]: *** [scripts/Makefile.vmlinux:34: vmlinux] Error 1
| make: *** [Makefile:1252: vmlinux] Error 2
Thus, if future changes add out-of-range branches in .idmap.text, it
should be easy enough to identify those from the resulting linker
errors.
Reported-by: syzbot+f8ac312e31226e23302b@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-arm-kernel/00000000000028ea4105f4e2ef54@google.com/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Will Deacon <will@kernel.org>
Tested-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230220162317.1581208-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230216-kobj_type-xen-v1-1-742423de7d71@weissschuh.net
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When support for the interrupt controller was added with a5042de2688d,
we forgot to update the flags to be set to contain IRQ_LEVEL. While the
flow handler is correct, the output from /proc/interrupts does not show
such interrupts as being level triggered when they are, correct that.
Fixes: a5042de2688d ("irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-3-f.fainelli@gmail.com
|
|
When support for the level triggered interrupt controller flavor was
added with c0ca7262088e, we forgot to update the flags to be set to
contain IRQ_LEVEL. While the flow handler is correct, the output from
/proc/interrupts does not show such interrupts as being level triggered
when they are, correct that.
Fixes: c0ca7262088e ("irqchip/brcmstb-l2: Add support for the BCM7271 L2 controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221216230934.2478345-2-f.fainelli@gmail.com
|
|
Both the 4Gb-segments and the PAE-extended-CR3 one are applicable to
32-bit guests only. The PAE-extended-CR3 use, furthermore, was redundant
with the PAE_MODE ELF note anyway.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/215515af-cfb9-3237-03ba-3312e3fa0d34@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Macro NILFS_SB2_OFFSET_BYTES, which computes the position of the second
superblock, underflows when the argument device size is less than 4096
bytes. Therefore, when using this macro, it is necessary to check in
advance that the device size is not less than a lower limit, or at least
that underflow does not occur.
The current nilfs2 implementation lacks this check, causing out-of-bound
block access when mounting devices smaller than 4096 bytes:
I/O error, dev loop0, sector 36028797018963960 op 0x0:(READ) flags 0x0
phys_seg 1 prio class 2
NILFS (loop0): unable to read secondary superblock (blocksize = 1024)
In addition, when trying to resize the filesystem to a size below 4096
bytes, this underflow occurs in nilfs_resize_fs(), passing a huge number
of segments to nilfs_sufile_resize(), corrupting parameters such as the
number of segments in superblocks. This causes excessive loop iterations
in nilfs_sufile_resize() during a subsequent resize ioctl, causing
semaphore ns_segctor_sem to block for a long time and hang the writer
thread:
INFO: task segctord:5067 blocked for more than 143 seconds.
Not tainted 6.2.0-rc8-syzkaller-00015-gf6feea56f66d #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:segctord state:D stack:23456 pid:5067 ppid:2
flags:0x00004000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5293 [inline]
__schedule+0x1409/0x43f0 kernel/sched/core.c:6606
schedule+0xc3/0x190 kernel/sched/core.c:6682
rwsem_down_write_slowpath+0xfcf/0x14a0 kernel/locking/rwsem.c:1190
nilfs_transaction_lock+0x25c/0x4f0 fs/nilfs2/segment.c:357
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2486 [inline]
nilfs_segctor_thread+0x52f/0x1140 fs/nilfs2/segment.c:2570
kthread+0x270/0x300 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308
</TASK>
...
Call Trace:
<TASK>
folio_mark_accessed+0x51c/0xf00 mm/swap.c:515
__nilfs_get_page_block fs/nilfs2/page.c:42 [inline]
nilfs_grab_buffer+0x3d3/0x540 fs/nilfs2/page.c:61
nilfs_mdt_submit_block+0xd7/0x8f0 fs/nilfs2/mdt.c:121
nilfs_mdt_read_block+0xeb/0x430 fs/nilfs2/mdt.c:176
nilfs_mdt_get_block+0x12d/0xbb0 fs/nilfs2/mdt.c:251
nilfs_sufile_get_segment_usage_block fs/nilfs2/sufile.c:92 [inline]
nilfs_sufile_truncate_range fs/nilfs2/sufile.c:679 [inline]
nilfs_sufile_resize+0x7a3/0x12b0 fs/nilfs2/sufile.c:777
nilfs_resize_fs+0x20c/0xed0 fs/nilfs2/super.c:422
nilfs_ioctl_resize fs/nilfs2/ioctl.c:1033 [inline]
nilfs_ioctl+0x137c/0x2440 fs/nilfs2/ioctl.c:1301
...
This fixes these issues by inserting appropriate minimum device size
checks or anti-underflow checks, depending on where the macro is used.
Link: https://lkml.kernel.org/r/0000000000004e1dfa05f4a48e6b@google.com
Link: https://lkml.kernel.org/r/20230214224043.24141-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: <syzbot+f0c4082ce5ebebdac63b@syzkaller.appspotmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Users can specify the hugetlb page size in the mmap, shmget and
memfd_create system calls. This is done by using 6 bits within the flags
argument to encode the base-2 logarithm of the desired page size. The
routine hstate_sizelog() uses the log2 value to find the corresponding
hugetlb hstate structure. Converting the log2 value (page_size_log) to
potential hugetlb page size is the simple statement:
1UL << page_size_log
Because only 6 bits are used for page_size_log, the left shift can not be
greater than 63. This is fine on 64 bit architectures where a long is 64
bits. However, if a value greater than 31 is passed on a 32 bit
architecture (where long is 32 bits) the shift will result in undefined
behavior. This was generally not an issue as the result of the undefined
shift had to exactly match hugetlb page size to proceed.
Recent improvements in runtime checking have resulted in this undefined
behavior throwing errors such as reported below.
Fix by comparing page_size_log to BITS_PER_LONG before doing shift.
Link: https://lkml.kernel.org/r/20230216013542.138708-1-mike.kravetz@oracle.com
Link: https://lore.kernel.org/lkml/CA+G9fYuei_Tr-vN9GS7SfFyU1y9hNysnf=PB7kT0=yv4MiPgVg@mail.gmail.com/
Fixes: 42d7395feb56 ("mm: support more pagesizes for MAP_HUGETLB/SHM_HUGETLB")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Jesper Juhl <jesperjuhl76@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Nick Bowler reported another sparc64 breakage after the young/dirty
persistent work for page migration (per "Link:" below). That's after a
similar report [2].
It turns out page migration was overlooked, and it wasn't failing before
because page migration was not enabled in the initial report test
environment.
David proposed another way [2] to fix this from sparc64 side, but that
patch didn't land somehow. Neither did I check whether there's any other
arch that has similar issues.
Let's fix it for now as simple as moving the write bit handling to be
after dirty, like what we did before.
Note: this is based on mm-unstable, because the breakage was since 6.1 and
we're at a very late stage of 6.2 (-rc8), so I assume for this specific
case we should target this at 6.3.
[1] https://lore.kernel.org/all/20221021160603.GA23307@u164.east.ru/
[2] https://lore.kernel.org/all/20221212130213.136267-1-david@redhat.com/
Link: https://lkml.kernel.org/r/20230216153059.256739-1-peterx@redhat.com
Fixes: 2e3468778dbe ("mm: remember young/dirty bit for page migrations")
Link: https://lore.kernel.org/all/CADyTPExpEqaJiMGoV+Z6xVgL50ZoMJg49B10LcZ=8eg19u34BA@mail.gmail.com/
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Nick Bowler <nbowler@draconx.ca>
Acked-by: David Hildenbrand <david@redhat.com>
Tested-by: Nick Bowler <nbowler@draconx.ca>
Cc: <regressions@lists.linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit 7fd461c47c6cfab4ca4d003790ec276209e52978.
Unfortunately, it has come to our attention that there is still a bug
somewhere in the READ_PLUS code that can result in nfsroot systems on
ARM to crash during boot.
Let's do the right thing and revert this change so we don't break
people's nfsroot setups.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Unconditionally calling radix_tree_preload_end() results in a OOPS
message as the preload is only conditionally called for
gfpflags_allow_blocking().
[ 20.267323] BUG: using smp_processor_id() in preemptible [00000000] code: fio/416
[ 20.267837] caller is brd_insert_page.part.0+0xbe/0x190 [brd]
[ 20.269436] Call Trace:
[ 20.269598] <TASK>
[ 20.269742] dump_stack_lvl+0x32/0x50
[ 20.269982] check_preemption_disabled+0xd1/0xe0
[ 20.270289] brd_insert_page.part.0+0xbe/0x190 [brd]
[ 20.270664] brd_submit_bio+0x33f/0xf40 [brd]
Use radix_tree_maybe_preload() which does preload only if
gfpflags_allow_blocking() is true but also takes the lock. Therefore,
unconditionally calling radix_tree_preload_end() should not create any
issues and the message disappears.
Fixes: 6ded703c56c2 ("brd: check for REQ_NOWAIT and set correct page allocation mask")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230217121442.33914-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix an inverted logic bug in gpio_sim_remove_hogs() that leads to GPIO
hog structures never being freed.
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
The sysfs group containing the cmb attributes is registered before the
driver knows if they need to be visible or not. Update the group when
cmb attributes are known to exist so the visibility setting is correct.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217037
Fixes: 86adbf0cdb9ec65 ("nvme: simplify transport specific device attribute handling")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
kernel test robot complains about a type mismatch:
block/blk-merge.c:984:42: sparse: expected restricted blk_opf_t const [usertype] ff
block/blk-merge.c:984:42: sparse: got unsigned int
block/blk-merge.c:1010:42: sparse: sparse: incorrect type in initializer (different base types) @@ expected restricted blk_opf_t const [usertype] ff @@ got unsigned int @@
block/blk-merge.c:1010:42: sparse: expected restricted blk_opf_t const [usertype] ff
block/blk-merge.c:1010:42: sparse: got unsigned int
because bio_failfast() is return an unsigned int rather than the
appropriate blk_opt_f type. Fix it up.
Fixes: 3ce6a115980c ("block: sync mixed merged request's failfast with 1st bio's")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202302170743.GXypM9Rt-lkp@intel.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The web page entry for the FPU EMULATOR no longer works. I notified Bill
of this and he asked me to update it to this new entry.
Link: https://lkml.kernel.org/r/20230214170208.17287-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Bill Metzenthen <billm@melbpc.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
During collapse, in a few places we check to see if a given small page has
any unaccounted references. If the refcount on the page doesn't match our
expectations, it must be there is an unknown user concurrently interested
in the page, and so it's not safe to move the contents elsewhere.
However, the unaccounted pins are likely an ephemeral state.
In this situation, MADV_COLLAPSE returns -EINVAL when it should return
-EAGAIN. This could cause userspace to conclude that the syscall
failed, when it in fact could succeed by retrying.
Link: https://lkml.kernel.org/r/20230125015738.912924-1-zokeefe@google.com
Fixes: 7d8faaf15545 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Reported-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I was running traces of the read code against an RAID storage system to
understand why read requests were being misaligned against the underlying
RAID strips. I found that the page end offset calculation in
filemap_get_read_batch() was off by one.
When a read is submitted with end offset 1048575, then it calculates the
end page for read of 256 when it should be 255. "last_index" is the index
of the page beyond the end of the read and it should be skipped when get a
batch of pages for read in @filemap_get_read_batch().
The below simple patch fixes the problem. This code was introduced in
kernel 5.12.
Link: https://lkml.kernel.org/r/20230208022400.28962-1-coolqyj@163.com
Fixes: cbd59c48ae2b ("mm/filemap: use head pages in generic_file_buffered_read")
Signed-off-by: Qian Yingjin <qian@ddn.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In the fix reconnecting hash__tlb_flush() to tlb_flush() the
void return on radix__tlb_flush() was not restored and subsequently
falls through to the restored hash__tlb_flush().
Guard hash__tlb_flush() under an else to prevent this.
Fixes: 1665c027afb2 ("powerpc/64s: Reconnect tlb_flush() to hash__tlb_flush()")
Reported-by: "Erhard F." <erhard_f@mailbox.org>
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230217011434.115554-1-bgray@linux.ibm.com
|
|
Currently it's possible for a user to open CHAIN events arbitrarily,
which we previously tried to rule out in commit:
ca2b497253ad01c8 ("arm64: perf: Reject stand-alone CHAIN events for PMUv3")
Which allowed the events to be opened, but prevented them from being
scheduled by by using an arm_pmu::filter_match hook to reject the
relevant events.
The CHAIN event filtering in the arm_pmu::filter_match hook was silently
removed in commit:
bd27568117664b8b ("perf: Rewrite core context handling")
As a result, it's now possible for users to open CHAIN events, and for
these to be installed arbitrarily.
Fix this by rejecting CHAIN events at creation time. This avoids the
creation of events which will never count, and doesn't require using the
dynamic filtering.
Attempting to open a CHAIN event (0x1e) will now be rejected:
| # ./perf stat -e armv8_pmuv3/config=0x1e/ ls
| perf
|
| Performance counter stats for 'ls':
|
| <not supported> armv8_pmuv3/config=0x1e/
|
| 0.002197470 seconds time elapsed
|
| 0.000000000 seconds user
| 0.002294000 seconds sys
Other events (e.g. CPU_CYCLES / 0x11) will open as usual:
| # ./perf stat -e armv8_pmuv3/config=0x11/ ls
| perf
|
| Performance counter stats for 'ls':
|
| 2538761 armv8_pmuv3/config=0x11/
|
| 0.002227330 seconds time elapsed
|
| 0.002369000 seconds user
| 0.000000000 seconds sys
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230216141240.3833272-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Janne reports that perf has been broken on Apple M1 as of commit:
bd27568117664b8b ("perf: Rewrite core context handling")
That commit replaced the pmu::filter_match() callback with
pmu::filter(), whose return value has the opposite polarity, with true
implying events should be ignored rather than scheduled. While an
attempt was made to update the logic in armv8pmu_filter() and
armpmu_filter() accordingly, the return value remains inverted in a
couple of cases:
* If the arm_pmu does not have an arm_pmu::filter() callback,
armpmu_filter() will always return whether the CPU is supported rather
than whether the CPU is not supported.
As a result, the perf core will not schedule events on supported CPUs,
resulting in a loss of events. Additionally, the perf core will
attempt to schedule events on unsupported CPUs, but this will be
rejected by armpmu_add(), which may result in a loss of events from
other PMUs on those unsupported CPUs.
* If the arm_pmu does have an arm_pmu::filter() callback, and
armpmu_filter() is called on a CPU which is not supported by the
arm_pmu, armpmu_filter() will return false rather than true.
As a result, the perf core will attempt to schedule events on
unsupported CPUs, but this will be rejected by armpmu_add(), which may
result in a loss of events from other PMUs on those unsupported CPUs.
This means a loss of events can be seen with any arm_pmu driver, but
with the ARMv8 PMUv3 driver (which is the only arm_pmu driver with an
arm_pmu::filter() callback) the event loss will be more limited and may
go unnoticed, which is how this issue evaded testing so far.
Fix the CPU filtering by performing this consistently in
armpmu_filter(), and remove the redundant arm_pmu::filter() callback and
armv8pmu_filter() implementation.
Commit bd2756811766 also silently removed the CHAIN event filtering from
armv8pmu_filter(), which will be addressed by a separate patch without
using the filter callback.
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Reported-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/asahi/20230215-arm_pmu_m1_regression-v1-1-f5a266577c8d@jannau.net/
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Eric Curtin <ecurtin@redhat.com>
Tested-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20230216141240.3833272-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Using "va" and "vb" doesn't match what's written on the board, or the
communications from StarFive.
Switching to using the silkscreened version number will ease confusion &
the risk of another spin of the board containing a "conflicting" version
identifier.
As the binding has not made it into mainline yet, take the opportunity
to "correct" things.
Suggested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/linux-riscv/Y+4AxDSDLyL1WAqh@wendy/
Fixes: 97b7ed072784 ("dt-bindings: riscv: Add StarFive JH7110 SoC and VisionFive 2 board")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230216131511.3327943-1-conor.dooley@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The uuid code is very low maintainance now that the major overhaul
has completed, and doesn't need it's own tree. All the recent work
has been done by Andy who'd like to stay on as a reviewer without an
explicit tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This code has been stale for years and I have no way to test it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make sure to copy the flags when a bio_integrity_payload is cloned.
Otherwise per-I/O properties such as IP checksum flag will not be
passed down to the HBA driver. Since the integrity buffer is owned by
the original bio, the BIP_BLOCK_INTEGRITY flag needs to be masked off
to avoid a double free in the completion path.
Fixes: aae7df50190a ("block: Integrity checksum flag")
Fixes: b1f01388574c ("block: Relocate bio integrity flags")
Reported-by: Saurav Kashyap <skashyap@marvell.com>
Tested-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230215171801.21062-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In the current code, io statistics are missing for cgroup when bio
was throttled by blk-throttle. Fix it by moving the unreaching code
to submit_bio_noacct_nocheck.
Fixes: 3f98c753717c ("block: don't check bio in blk_throtl_dispatch_work_fn")
Signed-off-by: Jinke Han <hanjinke.666@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230216032250.74230-1-hanjinke.666@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When calling the KVM_GET_DEBUGREGS ioctl, on some configurations, there
might be some unitialized portions of the kvm_debugregs structure that
could be copied to userspace. Prevent this as is done in the other kvm
ioctls, by setting the whole structure to 0 before copying anything into
it.
Bonus is that this reduces the lines of code as the explicit flag
setting and reserved space zeroing out can be removed.
Cc: Sean Christopherson <seanjc@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <x86@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: stable <stable@kernel.org>
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Message-Id: <20230214103304.3689213-1-gregkh@linuxfoundation.org>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
By default, non-mq drivers do not support nowait. This causes io_uring
to use a slower path as the driver cannot be trust not to block. brd
can safely set the nowait flag, as worst case all it does is a NOIO
allocation.
For io_uring, this makes a substantial difference. Before:
submitter=0, tid=453, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=440.03K, BW=1718MiB/s, IOS/call=32/31
IOPS=428.96K, BW=1675MiB/s, IOS/call=32/32
IOPS=442.59K, BW=1728MiB/s, IOS/call=32/31
IOPS=419.65K, BW=1639MiB/s, IOS/call=32/32
IOPS=426.82K, BW=1667MiB/s, IOS/call=32/31
and after:
submitter=0, tid=354, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=3.37M, BW=13.15GiB/s, IOS/call=32/31
IOPS=3.45M, BW=13.46GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.42GiB/s, IOS/call=32/32
IOPS=3.43M, BW=13.39GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.38GiB/s, IOS/call=32/31
or about an 8x in difference. Now that brd is prepared to deal with
REQ_NOWAIT reads/writes, mark it as supporting that.
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/linux-block/20230203103005.31290-1-p.raghav@samsung.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If REQ_NOWAIT is set, then do a non-blocking allocation if the operation
is a write and we need to insert a new page. Currently REQ_NOWAIT cannot
be set as the queue isn't marked as supporting nowait, this change is in
preparation for allowing that.
radix_tree_preload() warns on attempting to call it with an allocation
mask that doesn't allow blocking. While that warning could arguably
be removed, we need to handle radix insertion failures anyway as they
are more likely if we cannot block to get memory.
Remove legacy BUG_ON()'s and turn them into proper errors instead, one
for the allocation failure and one for finding a page that doesn't
match the correct index.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The HDaudio stream allocation is done first, and in a second step the
LOSIDV parameter is programmed for the multi-link used by a codec.
This leads to a possible stream_tag leak, e.g. if a DisplayAudio link
is not used. This would happen when a non-Intel graphics card is used
and userspace unconditionally uses the Intel Display Audio PCMs without
checking if they are connected to a receiver with jack controls.
We should first check that there is a valid multi-link entry to
configure before allocating a stream_tag. This change aligns the
dma_assign and dma_cleanup phases.
Complements: b0cd60f3e9f5 ("ALSA/ASoC: hda: clarify bus_get_link() and bus_link_get() helpers")
Link: https://github.com/thesofproject/linux/issues/4151
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230216162340.19480-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The enclustra PE1 is a baseboard from enclustra GmbH for the enclustra
Mercury AA1+ SOM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add binding for the enclustra PE1 baseboard from enclustra GmbH.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Return -ENOMEM if alloc_workqueue() fails. Don't return success.
Fixes: d8a650adf429 ("erofs: add per-cpu threads for decompression as an option")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/Y+4d0FRsUq8jPoOu@kili
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
We support mixed merge for requests/bios with different fastfail
settings. When request fails, each time we only handle the portion
with same failfast setting, then bios with failfast can be failed
immediately, and bios without failfast can be retried.
The idea is pretty good, but the current implementation has several
defects:
1) initially RA bio doesn't set failfast, however bio merge code
doesn't consider this point, and just check its failfast setting for
deciding if mixed merge is required. Fix this issue by adding helper
of bio_failfast().
2) when merging bio to request front, if this request is mixed
merged, we have to sync request's faifast setting with 1st bio's
failfast. Fix it by calling blk_update_mixed_merge().
3) when merging bio to request back, if this request is mixed
merged, we have to mark the bio as failfast, because blk_update_request
simply updates request failfast with 1st bio's failfast. Fix
it by calling blk_update_mixed_merge().
Fixes one normal EXT4 READ IO failure issue, because it is observed
that the normal READ IO is merged with RA IO, and the mixed merged
request has different failfast setting with 1st bio's, so finally
the normal READ IO doesn't get retried.
Cc: Tejun Heo <tj@kernel.org>
Fixes: 80a761fd33cf ("block: implement mixed merge of different failfast requests")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230209125527.667004-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
hv_get_nested_reg only translates SINT0, resulting in the wrong sint
being registered by nested vmbus.
Fix the issue with new utility function hv_is_sint_reg.
While at it, improve clarity of hv_set_non_nested_register and hv_is_synic_reg.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Jinank Jain <jinankjain@linux.microsoft.com>
Link: https://lore.kernel.org/r/1675980172-6851-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Add a new flag IORING_REGISTER_USE_REGISTERED_RING (set via the high bit
of the opcode) to treat the fd as a registered index rather than a file
descriptor.
This makes it possible for a library to open an io_uring, register the
ring fd, close the ring fd, and subsequently use the ring entirely via
registered index.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Link: https://lore.kernel.org/r/f2396369e638284586b069dbddffb8c992afba95.1676419314.git.josh@joshtriplett.org
[axboe: remove extra high bit clear]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cited commit changed devlink to register its netdev notifier block on
the global netdev notifier chain instead of on the per network namespace
one.
However, when changing the network namespace of the devlink instance,
devlink still tries to unregister its notifier block from the chain of
the old namespace and register it on the chain of the new namespace.
This results in corruption of the notifier chains, as the same notifier
block is registered on two different chains: The global one and the per
network namespace one. In turn, this causes other problems such as the
inability to dismantle namespaces due to netdev reference count issues.
Fix by preventing devlink from moving its notifier block between
namespaces.
Reproducer:
# echo "10 1" > /sys/bus/netdevsim/new_device
# ip netns add test123
# devlink dev reload netdevsim/netdevsim10 netns test123
# ip netns del test123
[ 71.935619] unregister_netdevice: waiting for lo to become free. Usage count = 2
[ 71.938348] leaked reference.
Fixes: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230215073139.1360108-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Commit a97f8783a937 ("igb: unbreak I2C bit-banging on i350") introduced
code to change I2C settings to bit banging unconditionally.
However, this patch introduced a regression: On an Intel S2600CWR
Server Board with three NICs:
- 1x dual-port copper
Intel I350 Gigabit Network Connection [8086:1521] (rev 01)
fw 1.63, 0x80000dda
- 2x quad-port SFP+ with copper SFP Avago ABCU-5700RZ
Intel I350 Gigabit Fiber Network Connection [8086:1522] (rev 01)
fw 1.52.0
the SFP NICs no longer get link at all. Reverting commit a97f8783a937
or switching to the Intel out-of-tree driver both fix the problem.
Per the igb out-of-tree driver, I2C bit banging on i350 depends on
support for an external thermal sensor (ETS). However, commit
a97f8783a937 added bit banging unconditionally. Additionally, the
out-of-tree driver always calls init_thermal_sensor_thresh on probe,
while our driver only calls init_thermal_sensor_thresh only in
igb_reset(), and only if an ETS is present, ignoring the internal
thermal sensor. The affected SFPs don't provide an ETS. Per Intel,
the behaviour is a result of i350 firmware requirements.
This patch fixes the problem by aligning the behaviour to the
out-of-tree driver:
- split igb_init_i2c() into two functions:
- igb_init_i2c() only performs the basic I2C initialization.
- igb_set_i2c_bb() makes sure that E1000_CTRL_I2C_ENA is set
and enables bit-banging.
- igb_probe() only calls igb_set_i2c_bb() if an ETS is present.
- igb_probe() calls init_thermal_sensor_thresh() unconditionally.
- igb_reset() aligns its behaviour to igb_probe(), i. e., call
igb_set_i2c_bb() if an ETS is present and call
init_thermal_sensor_thresh() unconditionally.
Fixes: a97f8783a937 ("igb: unbreak I2C bit-banging on i350")
Tested-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Co-developed-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: Jamie Bainbridge <jbainbri@redhat.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230214185549.1306522-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
[Why]
drm_atomic_normalize_zpos() can return an error code when there's
modeset lock contention. This was being ignored.
[How]
Bail out of atomic check if normalize_zpos() returns an error.
Fixes: b261509952bc ("drm/amd/display: Fix double cursor on non-video RGB MPO")
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Freeing memory was warned during suspend.
Move the self test out of suspend.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2151825
Cc: jfalempe@redhat.com
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-and-tested-by: Evan Quan <evan.quan@amd.com>
Tested-by: Jocelyn Falempe <jfalempe@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
|
|
This fixes a regression in mediation of getattr when old policy built
under an older ABI is loaded and mapped to internal permissions.
The regression does not occur for all getattr permission requests,
only appearing if state zero is the final state in the permission
lookup. This is because despite the first state (index 0) being
guaranteed to not have permissions in both newer and older permission
formats, it may have to carry permissions that were not mediated as
part of an older policy. These backward compat permissions are
mapped here to avoid special casing the mediation code paths.
Since the mapping code already takes into account backwards compat
permission from older formats it can be applied to state 0 to fix
the regression.
Fixes: 408d53e923bd ("apparmor: compute file permissions on profile load")
Reported-by: Philip Meulengracht <the_meulengracht@hotmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
|
|
Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The only user in the zoned remap code is gone now, so remove the argument.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_record_physical_zoned relies on a bio->bi_bdev samples in the
bio_end_io handler to find the reverse map for remapping the zone append
write, but stacked block device drivers can and usually do change bi_bdev
when sending on the bio to a lower device. This can happen e.g. with the
nvme-multipath driver when a NVMe SSD sets the shared namespace bit.
But there is no real need for the bdev in btrfs_record_physical_zoned,
as it is only passed to btrfs_rmap_block, which uses it to pick the
mapping to report if there are multiple reverse mappings. As zone
writes can only do simple non-mirror writes right now, and anything
more complex will use the stripe tree there is no chance of the multiple
mappings case actually happening.
Instead open code the subset of btrfs_rmap_block in
btrfs_record_physical_zoned, which also removes a memory allocation and
remove the bdev field in the ordered extent.
Fixes: d8e3fb106f39 ("btrfs: zoned: use ZONE_APPEND write for zoned mode")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Using Zone Append only makes sense for writes to the device, so check
that in btrfs_use_zone_append. This avoids the possibility of
artificially limited read size on zoned file systems.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
struct btrfs_bio has all the information needed for btrfs_use_append, so
pass that instead of a btrfs_inode and file_offset.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Instead of digging into the bio_vec in submit_one_bio, set file_offset at
bio allocation time from the provided parameter. This also ensures that
the file_offset is available all the time when building up the bio
payload.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_ordered_extent->disk_bytenr can be rewritten by the zoned I/O
completion handler, and thus in general is not a good idea to limit I/O
size. But the maximum bio size calculation can easily be done using the
file_offset fields in the btrfs_ordered_extent and btrfs_bio structures,
so switch to that instead.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the search loop of the binary search function, we are doing a division
by 2 of the sum of the high and low slots. Because the slots are integers,
the generated assembly code for it is the following on x86_64:
0x00000000000141f1 <+145>: mov %eax,%ebx
0x00000000000141f3 <+147>: shr $0x1f,%ebx
0x00000000000141f6 <+150>: add %eax,%ebx
0x00000000000141f8 <+152>: sar %ebx
It's a few more instructions than a simple right shift, because signed
integer division needs to round towards zero. However we know that slots
can never be negative (btrfs_header_nritems() returns an u32), so we
can instead use unsigned types for the low and high slots and therefore
use unsigned integer division, which results in a single instruction on
x86_64:
0x00000000000141f0 <+144>: shr %ebx
So use unsigned types for the slots and therefore unsigned division.
This is part of a small patchset comprised of the following two patches:
btrfs: eliminate extra call when doing binary search on extent buffer
btrfs: do unsigned integer division in the extent buffer binary search loop
The following fs_mark test was run on a non-debug kernel (Debian's default
kernel config) before and after applying the patchset:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdi
MNT=/mnt/sdi
MOUNT_OPTIONS="-o ssd"
MKFS_OPTIONS="-O no-holes -R free-space-tree"
FILES=100000
THREADS=$(nproc --all)
FILE_SIZE=0
umount $DEV &> /dev/null
mkfs.btrfs -f $MKFS_OPTIONS $DEV
mount $MOUNT_OPTIONS $DEV $MNT
OPTS="-S 0 -L 6 -n $FILES -s $FILE_SIZE -t $THREADS -k"
for ((i = 1; i <= $THREADS; i++)); do
OPTS="$OPTS -d $MNT/d$i"
done
fs_mark $OPTS
umount $MNT
Results before applying patchset:
FSUse% Count Size Files/sec App Overhead
2 1200000 0 174472.0 11549868
4 2400000 0 253503.0 11694618
4 3600000 0 257833.1 11611508
6 4800000 0 247089.5 11665983
6 6000000 0 211296.1 12121244
10 7200000 0 187330.6 12548565
Results after applying patchset:
FSUse% Count Size Files/sec App Overhead
2 1200000 0 207556.0 11393252
4 2400000 0 266751.1 11347909
4 3600000 0 274397.5 11270058
6 4800000 0 259608.4 11442250
6 6000000 0 238895.8 11635921
8 7200000 0 211942.2 11873825
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_bin_search() is just a wrapper around the function
generic_bin_search(), which passes the same arguments plus a default
low slot with a value of 0. This adds an unnecessary extra function
call, since btrfs_bin_search() is not static. So improve on this by
making btrfs_bin_search() an inline function that calls
generic_bin_search(), renaming the later to btrfs_generic_bin_search()
and exporting it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
Mark Rutland
Linus Torvalds
Thomas Weißschuh
Florian Fainelli
Jan Beulich
Ryusuke Konishi
Mike Kravetz
Peter Xu
Anna Schumaker
Pankaj Raghav
Bartosz Golaszewski
Keith Busch
Jens Axboe
Randy Dunlap
Zach O'Keefe
Qian Yingjin
Benjamin Gray
Conor Dooley
Christoph Hellwig
Martin K. Petersen
Jinke Han
Greg Kroah-Hartman
Pierre-Louis Bossart
Steffen Trumtrar
Dan Carpenter
Ming Lei
Nuno Das Neves
Josh Triplett
Ido Schimmel
Corinna Vinschen
Leo Li
Jack Xiao
John Johansen
Filipe Manana