| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When a queue is unbound from the vfio_ap device driver, it is reset to
ensure its crypto data is not leaked when it is bound to another device
driver. If the queue is unbound due to the fact that the adapter or domain
was removed from the host's AP configuration, then attempting to reset it
will fail with response code 01 (APID not valid) getting returned from the
reset command. Let's ensure that the queue is assigned to the host's
configuration before resetting it.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: "Jason J. Herne" <jjherne@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: eeb386aeb5b7 ("s390/vfio-ap: handle config changed and scan complete notification")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-7-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When a queue is unbound from the vfio_ap device driver, if that queue is
assigned to a guest's AP configuration, its associated adapter is removed
because queues are defined to a guest via a matrix of adapters and
domains; so, it is not possible to remove a single queue.
If an adapter is removed from the guest's AP configuration, all associated
queues must be reset to prevent leaking crypto data should any of them be
assigned to a different guest or device driver. The one caveat is that if
the queue is being removed because the adapter or domain has been removed
from the host's AP configuration, then an attempt to reset the queue will
fail with response code 01, AP-queue number not valid; so resetting these
queues should be skipped.
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Fixes: 09d31ff78793 ("s390/vfio-ap: hot plug/unplug of AP devices when probed/removed")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-6-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When filtering the adapters from the configuration profile for a guest to
create or update a guest's AP configuration, if the APID of an adapter and
the APQI of a domain identify a queue device that is not bound to the
vfio_ap device driver, the APID of the adapter will be filtered because an
individual APQN can not be filtered due to the fact the APQNs are assigned
to an AP configuration as a matrix of APIDs and APQIs. Consequently, a
guest will not have access to all of the queues associated with the
filtered adapter. If the queues are subsequently made available again to
the guest, they should re-appear in a reset state; so, let's make sure all
queues associated with an adapter unplugged from the guest are reset.
In order to identify the set of queues that need to be reset, let's allow a
vfio_ap_queue object to be simultaneously stored in both a hashtable and a
list: A hashtable used to store all of the queues assigned
to a matrix mdev; and/or, a list used to store a subset of the queues that
need to be reset. For example, when an adapter is hot unplugged from a
guest, all guest queues associated with that adapter must be reset. Since
that may be a subset of those assigned to the matrix mdev, they can be
stored in a list that can be passed to the vfio_ap_mdev_reset_queues
function.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-5-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
When adapters and/or domains are added to the host's AP configuration, this
may result in multiple queue devices getting created and probed by the
vfio_ap device driver. For each queue device probed, the matrix of adapters
and domains assigned to a matrix mdev will be filtered to update the
guest's APCB. If any adapters or domains get added to or removed from the
APCB, the guest's AP configuration will be dynamically updated (i.e., hot
plug/unplug). To dynamically update the guest's configuration, its VCPUs
must be taken out of SIE for the period of time it takes to make the
update. This is disruptive to the guest's operation and if there are many
queues probed due to a change in the host's AP configuration, this could be
troublesome. The problem is exacerbated by the fact that the
'on_scan_complete' callback also filters the mdev's matrix and updates
the guest's AP configuration.
In order to reduce the potential amount of disruption to the guest that may
result from a change to the host's AP configuration, let's bypass the
filtering of the matrix and updating of the guest's AP configuration in the
probe callback - if due to a host config change - and defer it until the
'on_scan_complete' callback is invoked after the AP bus finishes its device
scan operation. This way the filtering and updating will be performed only
once regardless of the number of queues added.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-4-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
While filtering the mdev matrix, it doesn't make sense - and will have
unexpected results - to filter an APID from the matrix if the APID or one
of the associated APQIs is not in the host's AP configuration. There are
two reasons for this:
1. An adapter or domain that is not in the host's AP configuration can be
assigned to the matrix; this is known as over-provisioning. Queue
devices, however, are only created for adapters and domains in the
host's AP configuration, so there will be no queues associated with an
over-provisioned adapter or domain to filter.
2. The adapter or domain may have been externally removed from the host's
configuration via an SE or HMC attached to a DPM enabled LPAR. In this
case, the vfio_ap device driver would have been notified by the AP bus
via the on_config_changed callback and the adapter or domain would
have already been filtered.
Since the matrix_mdev->shadow_apcb.apm and matrix_mdev->shadow_apcb.aqm are
copied from the mdev matrix sans the APIDs and APQIs not in the host's AP
configuration, let's loop over those bitmaps instead of those assigned to
the matrix.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-3-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or
domain is assigned to the mdev. The purpose of the function is to update
the guest's AP configuration by filtering the matrix of adapters and
domains assigned to the mdev. When an adapter or domain is assigned, only
the APQNs associated with the APID of the new adapter or APQI of the new
domain are inspected. If an APQN does not reference a queue device bound to
the vfio_ap device driver, then it's APID will be filtered from the mdev's
matrix when updating the guest's AP configuration.
Inspecting only the APID of the new adapter or APQI of the new domain will
result in passing AP queues through to a guest that are not bound to the
vfio_ap device driver under certain circumstances. Consider the following:
guest's AP configuration (all also assigned to the mdev's matrix):
14.0004
14.0005
14.0006
16.0004
16.0005
16.0006
unassign domain 4
unbind queue 16.0005
assign domain 4
When domain 4 is re-assigned, since only domain 4 will be inspected, the
APQNs that will be examined will be:
14.0004
16.0004
Since both of those APQNs reference queue devices that are bound to the
vfio_ap device driver, nothing will get filtered from the mdev's matrix
when updating the guest's AP configuration. Consequently, queue 16.0005
will get passed through despite not being bound to the driver. This
violates the linux device model requirement that a guest shall only be
given access to devices bound to the device driver facilitating their
pass-through.
To resolve this problem, every adapter and domain assigned to the mdev will
be inspected when filtering the mdev's matrix.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Fixes: 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115185441.31526-2-akrowiak@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
Thank you Wenjia for your support, welcome Thorsten!
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Acked-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.
[1] https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments
Link: https://lore.kernel.org/linux-trace-kernel/20240115181658.4562-1-erick.archer@gmx.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The original eventfs code added a wrapper around the dcache_readdir open
callback and created all the dentries and inodes at open, and increment
their ref count. A wrapper was added around the dcache_readdir release
function to decrement all the ref counts of those created inodes and
dentries. But this proved to be buggy[1] for when a kprobe was created
during a dir read, it would create a dentry between the open and the
release, and because the release would decrement all ref counts of all
files and directories, that would include the kprobe directory that was
not there to have its ref count incremented in open. This would cause the
ref count to go to negative and later crash the kernel.
To solve this, the dentries and inodes that were created and had their ref
count upped in open needed to be saved. That list needed to be passed from
the open to the release, so that the release would only decrement the ref
counts of the entries that were incremented in the open.
Unfortunately, the dcache_readdir logic was already using the
file->private_data, which is the only field that can be used to pass
information from the open to the release. What was done was the eventfs
created another descriptor that had a void pointer to save the
dcache_readdir pointer, and it wrapped all the callbacks, so that it could
save the list of entries that had their ref counts incremented in the
open, and pass it to the release. The wrapped callbacks would just put
back the dcache_readdir pointer and call the functions it used so it could
still use its data[2].
But Linus had an issue with the "hijacking" of the file->private_data
(unfortunately this discussion was on a security list, so no public link).
Which we finally agreed on doing everything within the iterate_shared
callback and leave the dcache_readdir out of it[3]. All the information
needed for the getents() could be created then.
But this ended up being buggy too[4]. The iterate_shared callback was not
the right place to create the dentries and inodes. Even Christian Brauner
had issues with that[5].
An attempt was to go back to creating the inodes and dentries at
the open, create an array to store the information in the
file->private_data, and pass that information to the other callbacks.[6]
The difference between that and the original method, is that it does not
use dcache_readdir. It also does not up the ref counts of the dentries and
pass them. Instead, it creates an array of a structure that saves the
dentry's name and inode number. That information is used in the
iterate_shared callback, and the array is freed in the dir release. The
dentries and inodes created in the open are not used for the iterate_share
or release callbacks. Just their names and inode numbers.
Linus did not like that either[7] and just wanted to remove the dentries
being created in iterate_shared and use the hard coded inode numbers.
[ All this while Linus enjoyed an unexpected vacation during the merge
window due to lack of power. ]
[1] https://lore.kernel.org/linux-trace-kernel/20230919211804.230edf1e@gandalf.local.home/
[2] https://lore.kernel.org/linux-trace-kernel/20230922163446.1431d4fa@gandalf.local.home/
[3] https://lore.kernel.org/linux-trace-kernel/20240104015435.682218477@goodmis.org/
[4] https://lore.kernel.org/all/202401152142.bfc28861-oliver.sang@intel.com/
[5] https://lore.kernel.org/all/20240111-unzahl-gefegt-433acb8a841d@brauner/
[6] https://lore.kernel.org/all/20240116114711.7e8637be@gandalf.local.home/
[7] https://lore.kernel.org/all/20240116170154.5bf0a250@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240116211353.573784051@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Fixes: 493ec81a8fb8 ("eventfs: Stop using dcache_readdir() for getdents()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202401152142.bfc28861-oliver.sang@intel.com
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The dentries and inodes are created in the readdir for the sole purpose of
getting a consistent inode number. Linus stated that is unnecessary, and
that all inodes can have the same inode number. For a virtual file system
they are pretty meaningless.
Instead use a single unique inode number for all files and one for all
directories.
Link: https://lore.kernel.org/all/20240116133753.2808d45e@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240116211353.412180363@goodmis.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Ajay Kaher <ajay.kaher@broadcom.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Linus reported a ~50% performance regression on single-threaded
workloads on his AMD Ryzen system, and bisected it to:
9c0b4bb7f630 ("sched/cpufreq: Rework schedutil governor performance estimation")
When frequency invariance is not enabled, get_capacity_ref_freq(policy)
is supposed to return the current frequency and the performance margin
applied by map_util_perf(), enabling the utilization to go above the
maximum compute capacity and to select a higher frequency than the current one.
After the changes in 9c0b4bb7f630, the performance margin was applied
earlier in the path to take into account utilization clampings and
we couldn't get a utilization higher than the maximum compute capacity,
and the CPU remained 'stuck' at lower frequencies.
To fix this, we must use a frequency above the current frequency to
get a chance to select a higher OPP when the current one becomes fully used.
Apply the same margin and return a frequency 25% higher than the current
one in order to switch to the next OPP before we fully use the CPU
at the current one.
[ mingo: Clarified the changelog. ]
Fixes: 9c0b4bb7f630 ("sched/cpufreq: Rework schedutil governor performance estimation")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Bisected-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Wyes Karny <wkarny@gmail.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Wyes Karny <wkarny@gmail.com>
Link: https://lore.kernel.org/r/20240114183600.135316-1-vincent.guittot@linaro.org
|
|
Fix kernel-doc issues reported by
"find include -name \*pci\* | xargs scripts/kernel-doc -none":
include/linux/pci.h:731: warning: Function parameter or member 'pdev' not described in 'pci_is_vga'
include/linux/pci-epc.h:154: warning: Function parameter or member 'list_lock' not described in 'pci_epc'
include/linux/pci-epf.h:83: warning: expecting prototype for struct pci_epf_event_ops. Prototype was for struct pci_epc_event_ops instead
Link: https://lore.kernel.org/r/20240111162850.2177655-1-helgaas@kernel.org
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Sui Jingfeng <suijingfeng@loongson.cn>
|
|
It appears on TU106 GPUs (2070), that some of the nvdec engines
are in the runlist but have no valid nonstall interrupt, nouveau
didn't handle that too well.
This should let nouveau/gsp work on those.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://lore.kernel.org/all/20240110011826.3996289-1-airlied@gmail.com/
|
|
The hotjoin syfs entry allows to enable or disable Hot-Join on the Current
Controller of the I3C Bus.
Link: https://lore.kernel.org/r/20240114225232.140860-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Fix warning found by
'scripts/kernel-doc -v -none include/linux/i3c/master.h'
include/linux/i3c/master.h:457: warning: Function parameter or member 'enable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:457: warning: Function parameter or member 'disable_hotjoin' not described in 'i3c_master_controller_ops'
include/linux/i3c/master.h:499: warning: Function parameter or member 'hotjoin' not described in 'i3c_master_controller'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240109052548.2128133-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add CMDQ driver support for mt8188 by adding its compatible and
driver data in CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Sort cmdq platform data according to the number sequence of
compatible names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Rename gce_plat variable postfix from 'v1~v7' to SoC names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Document the Inter-Processor Communication Controller on the X1E80100 Platform.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
kernel test robot reports 2 Excess struct member warnings:
zynqmp-ipi-mailbox.c:92: warning: Excess struct member 'irq' description in 'zynqmp_ipi_mbox'
zynqmp-ipi-mailbox.c:112: warning: Excess struct member 'ipi_mboxes' description in 'zynqmp_ipi_pdata'
The second one is a false positive that is caused by the
__counted_by() attribute. Kees has posted a patch for that, so just
fix the first one.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150705.glrQ4ypv-lkp@intel.com/
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Add documentation for AMD-Xilinx Versal platform Inter Processor Interrupt
controller. Versal IPI controller contains buffer-less IPI which do not
have buffers for message passing. For such IPI channels message buffers
are not expected and only notification to/from remote agent is expected.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
"xlnx,ipi-id" is handled as required property but is
missing from binding doc required list of mailbox child node.
Add that to required list. This does not break backward
compatibility but bug in bindings document.
Fixes: 4a855a957936 ("dt-bindings: mailbox: zynqmp_ipi: convert to yaml")
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Message Handling Unit version is v2.1.
When arm_mhuv2 working with the data protocol transfer mode.
We have split one mhu into two channels, and every channel
include four channel windows, the two channels share
one gic spi interrupt.
There is a problem with the sending scenario.
The first channel will take up 0-3 channel windows, and the second
channel take up 4-7 channel windows. When the first channel send the
data, and the receiver will clear all the four channels status.
Although we only enabled the interrupt on the last channel window with
register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8.
Currently we just clear the last channel windows int status with the
data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7,
not be the 0x0.
Then the second channel send the data, the receiver read the
data, clear all the four channel windows status, trigger the sender
interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7,
get_irq_chan_comb function will always return the first channel.
So this patch clear all channel windows int status to avoid this interrupt
confusion.
Signed-off-by: Xiaowu.ding <xiaowu.ding@jaguarmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Similarly to previous commit e17225887005 ("mailbox: qcom-apcs-ipc: do
not grow the of_device_id"), move compatibles with fallbacks in the
of_device_id table, to indicate these are not necessary. This only
shuffles the code. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Rework the compatibles and group devices which have similar interface
(same from Linux driver point of view) as compatible. This allows
smaller of_device_id table in the Linux driver and smaller
allOf:if:then: constraints.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
qcom,ipq8074-apcs-apps-global compatible is listed in two places: with
and without fallback. Drop the second case to match DTS.
Fixes: 34d8775a0edc ("dt-bindings: mailbox: qcom,apcs-kpss-global: use fallbacks for few variants")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
|
|
Linus pointed out that there's error handling and naming issues in the
that we should rewrite:
* Perform the access checks for the buffer before actually doing any
work instead of doing it during the iteration.
* Rename the arguments to listmount() and do_listmount() to clarify what
the arguments are used for.
* Get rid of the pointless ctr variable and overflow checking.
* Get rid of the pointless speculation check.
Link: https://lore.kernel.org/r/CAHk-=wjh6Cypo8WC-McXgSzCaou3UXccxB+7PVeSuGR8AjCphg@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
kill_f2fs_super() is called even if f2fs_fill_super() fails.
f2fs_fill_super() frees the struct f2fs_sb_info, so it must set
sb->s_fs_info to NULL to prevent it from being freed again.
Fixes: 275dca4630c1 ("f2fs: move release of block devices to after kill_block_super()")
Reported-by: <syzbot+8f477ac014ff5b32d81f@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/lkml/0000000000006cb174060ec34502@google.com
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/linux-f2fs-devel/20240113005747.38887-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
While testing UFFDIO_MOVE ioctl, syzbot triggered VM_BUG_ON_PAGE caused by
a call to PageAnonExclusive() with a huge_zero_page as a parameter.
UFFDIO_MOVE does not yet handle zeropages and returns EBUSY when one is
encountered. Add an early huge_zero_page check in the PMD move path to
avoid this situation.
Link: https://lkml.kernel.org/r/20240112013935.1474648-1-surenb@google.com
Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
Reported-by: syzbot+705209281e36404998f6@syzkaller.appspotmail.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since the shrinker-related code has been moved to a separate shrinker.c
file, it's time to add a MAINTAINERS entry for it.
Dave, Roman, Muchun and I have all worked on shrinker (development,
review, etc) in the past period of time, and all of us are willing to
continue working on shrinker in the future, so I'd like to add all of us
as maintainer/reviewer.
Link: https://lkml.kernel.org/r/20240111075219.34221-1-zhengqi.arch@bytedance.com
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kernel sefltest mm/hugepage-vmemmap fails on architectures which has
different page size other than 4K. In hugepage-vmemmap page size used is
4k so the pfn calculation will go wrong on systems which has different
page size .The length of MAP_HUGETLB memory must be hugepage aligned but
in hugepage-vmemmap map length is 2M so this will not get aligned if the
system has differnet hugepage size.
Added psize() to get the page size and default_huge_page_size() to
get the default hugepage size at run time, hugepage-vmemmap test pass
on powerpc with 64K page size and x86 with 4K page size.
Result on powerpc without patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 0
Head page flags (100000000) is invalid
check_page_flags: Invalid argument
*#
Result on powerpc with patch (page size 64K)
*# ./hugepage-vmemmap
Returned address is 0x7effff000000 whose pfn is 600
*#
Result on x86 with patch (page size 4K)
*# ./hugepage-vmemmap
Returned address is 0x7fc7c2c00000 whose pfn is 1dac00
*#
Link: https://lkml.kernel.org/r/3b3a3ae37ba21218481c482a872bbf7526031600.1704865754.git.donettom@linux.vnet.ibm.com
Fixes: b147c89cd429 ("selftests: vm: add a hugetlb test case")
Signed-off-by: Donet Tom <donettom@linux.vnet.ibm.com>
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Tested-by: Geetika Moolchandani <geetika@linux.ibm.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
set_memmap_mode() stores the kernel parameter memmap mode as an integer.
However, the get_memmap_mode() function utilizes param_get_bool() to fetch
the value as a boolean, leading to potential endianness issue. On
Big-endian architectures, the memmap_on_memory is consistently displayed
as 'N' regardless of its actual status.
To address this endianness problem, the solution involves obtaining the
mode as an integer. This adjustment ensures the proper display of the
memmap_on_memory parameter, presenting it as one of the following options:
Force, Y, or N.
Link: https://lkml.kernel.org/r/20240110140127.241451-1-sumanthk@linux.ibm.com
Fixes: 2d1f649c7c08 ("mm/memory_hotplug: support memmap_on_memory when memmap is not aligned to pageblocks")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Suggested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Access to the tanzirh@google.com email will be revoked upon the end of the
internship.
Link: https://lkml.kernel.org/r/20240105-newemail-v3-1-3dc8ae035b54@google.com
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add my old email addresses so that git send-email will map them
to my current email address.
Link: https://lkml.kernel.org/r/20240106063051.13623-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
sparse warnings:
kernel/crash_core.c:749:1: sparse: sparse: symbol '__crash_hotplug_lock' was not declared. Should it be static?
Fixes: e2a8f20dd8e9 ("Crash: add lock to serialize crash hotplug handling")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401080654.IjjU5oK7-lkp@intel.com/
Cc: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If the system has no mirrored memory or uses crashkernel.high while
kernelcore=mirror is enabled on the command line then during crashkernel,
there will be limited mirrored memory and this usually leads to OOM.
To solve this problem, disable the mirror feature during crashkernel.
Link: https://lkml.kernel.org/r/20240109041536.3903042-1-mawupeng1@huawei.com
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syscore_shutdown() runs driver and module callbacks to get the system into
a state where it can be correctly shut down. In commit 6f389a8f1dd2 ("PM
/ reboot: call syscore_shutdown() after disable_nonboot_cpus()")
syscore_shutdown() was removed from kernel_restart_prepare() and hence got
(incorrectly?) removed from the kexec flow. This was innocuous until
commit 6735150b6997 ("KVM: Use syscore_ops instead of reboot_notifier to
hook restart/shutdown") changed the way that KVM registered its shutdown
callbacks, switching from reboot notifiers to syscore_ops.shutdown. As
syscore_shutdown() is missing from kexec, KVM's shutdown hook is not run
and virtualisation is left enabled on the boot CPU which results in triple
faults when switching to the new kernel on Intel x86 VT-x with VMXE
enabled.
Fix this by adding syscore_shutdown() to the kexec sequence. In terms of
where to add it, it is being added after migrating the kexec task to the
boot CPU, but before APs are shut down. It is not totally clear if this
is the best place: in commit 6f389a8f1dd2 ("PM / reboot: call
syscore_shutdown() after disable_nonboot_cpus()") it is stated that
"syscore_ops operations should be carried with one CPU on-line and
interrupts disabled." APs are only offlined later in machine_shutdown(),
so this syscore_shutdown() is being run while APs are still online. This
seems to be the correct place as it matches where syscore_shutdown() is
run in the reboot and halt flows - they also run it before APs are shut
down. The assumption is that the commit message in commit 6f389a8f1dd2
("PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()") is
no longer valid.
KVM has been discussed here as it is what broke loudly by not having
syscore_shutdown() in kexec, but this change impacts more than just KVM;
all drivers/modules which register a syscore_ops.shutdown callback will
now be invoked in the kexec flow. Looking at some of them like x86 MCE it
is probably more correct to also shut these down during kexec.
Maintainers of all drivers which use syscore_ops.shutdown are added on CC
for visibility. They are:
arch/powerpc/platforms/cell/spu_base.c .shutdown = spu_shutdown,
arch/x86/kernel/cpu/mce/core.c .shutdown = mce_syscore_shutdown,
arch/x86/kernel/i8259.c .shutdown = i8259A_shutdown,
drivers/irqchip/irq-i8259.c .shutdown = i8259A_shutdown,
drivers/irqchip/irq-sun6i-r.c .shutdown = sun6i_r_intc_shutdown,
drivers/leds/trigger/ledtrig-cpu.c .shutdown = ledtrig_cpu_syscore_shutdown,
drivers/power/reset/sc27xx-poweroff.c .shutdown = sc27xx_poweroff_shutdown,
kernel/irq/generic-chip.c .shutdown = irq_gc_shutdown,
virt/kvm/kvm_main.c .shutdown = kvm_shutdown,
This has been tested by doing a kexec on x86_64 and aarch64.
Link: https://lkml.kernel.org/r/20231213064004.2419447-1-jgowans@amazon.com
Fixes: 6735150b6997 ("KVM: Use syscore_ops instead of reboot_notifier to hook restart/shutdown")
Signed-off-by: James Gowans <jgowans@amazon.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Alexander Graf <graf@amazon.de>
Cc: Jan H. Schoenherr <jschoenh@amazon.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Remove the map for Linaro id as it is still in use and I want to use it
for submitting patches. Otherwise, git uses kernel.org as the author id
for patches created using Linaro id.
Link: https://lkml.kernel.org/r/20240109-update-mailmap-v1-1-bf7a39f15fb7@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
Tony Krowiak
Alexandra Winter
Erick Archer
Steven Rostedt (Google)
Vincent Guittot
Bjorn Helgaas
Dave Airlie
Alexandre Belloni
Frank Li
Jason-JH.Lin
Abel Vesa
Uwe Kleine-König
Randy Dunlap
Tanmay Shah
Xiaowu.ding
Krzysztof Kozlowski
Christian Brauner
Eric Biggers
Suren Baghdasaryan
Qi Zheng
Donet Tom
Sumanth Korikkar
Tanzir Hasan
Andrew Morton
Ma Wupeng
James Gowans
Manivannan Sadhasivam