aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-03-27Input: imx_keypad - convert to a DT-only driverFabio Estevam1-11/+2
i.MX has been converted to a DT-only platform, so make the adjustments to the driver to convert it to a DT-only driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210327194307.541248-1-festevam@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: elan_i2c - fix a typo in parameter nameNikolai Kostrigin1-1/+1
s/max_baseliune/max_baseline/ Signed-off-by: Nikolai Kostrigin <nickel@altlinux.org> Link: https://lore.kernel.org/r/20210311114146.1977616-1-nickel@altlinux.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: move to use request_irq by IRQF_NO_AUTOEN flagBarry Song11-28/+18
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable because of requesting. On the other hand, request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can also be replaced by request_irq() with IRQF_NO_AUTOEN flag. Signed-off-by: Barry Song <song.bao.hua@hisilicon.com> Link: https://lore.kernel.org/r/20210302224916.13980-3-song.bao.hua@hisilicon.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: cyttsp - verbose error on soft resetLinus Walleij1-5/+8
The first thing the Cypress driver does when starting up is to try a soft reset. This is the first point where the driver SPI/I2C communication can fail, so put out some nice debug text: cyttsp-spi spi2.0: failed to send soft reset Instead of just: cyttsp-spi: probe of spi2.0 failed with error -5 This is more helpful. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210322221349.1116666-1-linus.walleij@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25dt-bindings: input: iqs5xx: Convert to YAMLJeff LaBundy2-80/+75
This patch converts the legacy text-based binding document to YAML format. Extraneous details and touchscreen properties that weren't actually supported have been dropped. The reset GPIO has since been made optional in the driver; this is now reflected here as well. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20210323021006.367-2-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: iqs5xx - make reset GPIO optionalJeff LaBundy1-8/+17
The device's hardware reset pin is only required if the platform must be able to update the device's firmware. As such, demote the reset GPIO to optional in support of devices that ship with pre-programmed firmware and don't route the reset pin back to the SoC. In that case, the 'fw_file' attribute is hidden because there is no way to open the bootloader. The logic is extended to the case in which the device does not advertise bootloader support in the first place. Last but not least, remove the hardware reset performed at probe because there is no reason to reset the device manually. A power on reset function already ensures a clean reset at start-up. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210323021006.367-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-03-25Input: Add support for Azoteq IQS626AJeff LaBundy3-0/+1850
This patch adds support for the Azoteq IQS626A capacitive touch controller. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20210301234928.4298-5-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>