| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We must free 'argv' before returning, as already done in all the other
paths of this function.
Link: https://lkml.kernel.org/r/21e3594ccd7fc88c5c162c98450409190f304327.1618136448.git.christophe.jaillet@wanadoo.fr
Fixes: d262271d0483 ("tracing/dynevent: Delegate parsing to create function")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Detected a broken boot on mcf54415, likely introduced from
commit 4bfc848e0981
("m68k/mm: enable use of generic memory_model.h for !DISCONTIGMEM")
Fix ARCH_PFN_OFFSET to be a pfn.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
|
|
|
|
Moves the location of the superblock logging zones. The new locations of
the logging zones are now determined based on fixed block addresses
instead of on fixed zone numbers.
The old placement method based on fixed zone numbers causes problems when
one needs to inspect a file system image without access to the drive zone
information. In such case, the super block locations cannot be reliably
determined as the zone size is unknown. By locating the superblock logging
zones using fixed addresses, we can scan a dumped file system image without
the zone information since a super block copy will always be present at or
after the fixed known locations.
Introduce the following three pairs of zones containing fixed offset
locations, regardless of the device zone size.
- primary superblock: offset 0B (and the following zone)
- first copy: offset 512G (and the following zone)
- Second copy: offset 4T (4096G, and the following zone)
If a logging zone is outside of the disk capacity, we do not record the
superblock copy.
The first copy position is much larger than for a non-zoned filesystem,
which is at 64M. This is to avoid overlapping with the log zones for
the primary superblock. This higher location is arbitrary but allows
supporting devices with very large zone sizes, plus some space around in
between.
Such large zone size is unrealistic and very unlikely to ever be seen in
real devices. Currently, SMR disks have a zone size of 256MB, and we are
expecting ZNS drives to be in the 1-4GB range, so this limit gives us
room to breathe. For now, we only allow zone sizes up to 8GB. The
maximum zone size that would still fit in the space is 256G.
The fixed location addresses are somewhat arbitrary, with the intent of
maintaining superblock reliability for smaller and larger devices, with
the preference for the latter. For this reason, there are two superblocks
under the first 1T. This should cover use cases for physical devices and
for emulated/device-mapper devices.
The superblock logging zones are reserved for superblock logging and
never used for data or metadata blocks. Note that we only reserve the
two zones per primary/copy actually used for superblock logging. We do
not reserve the ranges of zones possibly containing superblocks with the
largest supported zone size (0-16GB, 512G-528GB, 4096G-4112G).
The zones containing the fixed location offsets used to store
superblocks on a non-zoned volume are also reserved to avoid confusion.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When LATENCYTOP, LOCKDEP, or FAULT_INJECTION_STACKTRACE_FILTER is
enabled and ARCH_WANT_FRAME_POINTERS is disabled, Kbuild gives a warning
such as:
WARNING: unmet direct dependencies detected for FRAME_POINTER
Depends on [n]: DEBUG_KERNEL [=y] && (M68K || UML || SUPERH) || ARCH_WANT_FRAME_POINTERS [=n] || MCOUNT [=n]
Selected by [y]:
- LATENCYTOP [=y] && DEBUG_KERNEL [=y] && STACKTRACE_SUPPORT [=y] && PROC_FS [=y] && !MIPS && !PPC && !S390 && !MICROBLAZE && !ARM && !ARC && !X86
Depending on ARCH_WANT_FRAME_POINTERS causes a recursive dependency
error. ARCH_WANT_FRAME_POINTERS is to be selected by the architecture,
and is not supposed to be overridden by other config options.
Link: https://lkml.kernel.org/r/20210329165329.27994-1-julianbraha@gmail.com
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On systems with KPTI enabled, we can currently observe the following
warning:
BUG: using smp_processor_id() in preemptible
caller is invalidate_user_asid+0x13/0x50
CPU: 6 PID: 1075 Comm: dmesg Not tainted 5.12.0-rc4-gda4a2b1a5479-kfence_1+ #1
Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012
Call Trace:
dump_stack+0x7f/0xad
check_preemption_disabled+0xc8/0xd0
invalidate_user_asid+0x13/0x50
flush_tlb_one_kernel+0x5/0x20
kfence_protect+0x56/0x80
...
While it normally makes sense to require preemption to be off, so that
the expected CPU's TLB is flushed and not another, in our case it really
is best-effort (see comments in kfence_protect_page()).
Avoid the warning by disabling preemption around flush_tlb_one_kernel().
Link: https://lore.kernel.org/lkml/YGIDBAboELGgMgXy@elver.google.com/
Link: https://lkml.kernel.org/r/20210330065737.652669-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Local `unused' is intentionally unused - it is there to suppress
__must_check warnings.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lkml.kernel.org/r/202104050216.HflRxfJm-lkp@intel.com
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When page poisoning is enabled, it accesses memory that is marked as
poisoned by KASAN, which leas to false-positive KASAN reports.
Suppress the reports by adding KASAN annotations to unpoison_page()
(poison_page() already has them).
Link: https://lkml.kernel.org/r/2dc799014d31ac13fd97bd906bad33e16376fc67.1617118501.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I encountered a hung task issue, but not a performance one. I run DIO
on a device (need lba continuous, for example open channel ssd), maybe
hungtask in below case:
DIO: Checkpoint:
get addr A(at boundary), merge into BIO,
no submit because boundary missing
flush dirty data(get addr A+1), wait IO(A+1)
writeback timeout, because DIO(A) didn't submit
get addr A+2 fail, because checkpoint is doing
dio_send_cur_page() may clear sdio->boundary, so prevent it from missing
a boundary.
Link: https://lkml.kernel.org/r/20210322042253.38312-1-jack.qiu@huawei.com
Fixes: b1058b981272 ("direct-io: submit bio after boundary buffer is added to it")
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
ia64 has two stacks:
- memory stack (or stack), pointed at by by r12
- register backing store (register stack), pointed at by
ar.bsp/ar.bspstore with complications around dirty
register frame on CPU.
In [1] Dmitry noticed that PTRACE_GET_SYSCALL_INFO returns the register
stack instead memory stack.
The bug comes from the fact that user_stack_pointer() and
current_user_stack_pointer() don't return the same register:
ulong user_stack_pointer(struct pt_regs *regs) { return regs->ar_bspstore; }
#define current_user_stack_pointer() (current_pt_regs()->r12)
The change gets both back in sync.
I think ptrace(PTRACE_GET_SYSCALL_INFO) is the only affected user by
this bug on ia64.
The change fixes 'rt_sigreturn.gen.test' strace test where it was
observed initially.
Link: https://bugs.gentoo.org/769614 [1]
Link: https://lkml.kernel.org/r/20210331084447.2561532-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Reported-by: Dmitry V. Levin <ldv@altlinux.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The following deadlock is detected:
truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write).
PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9"
#0 __schedule at ffffffff818667cc
#1 schedule at ffffffff81866de6
#2 inode_dio_wait at ffffffff812a2d04
#3 ocfs2_setattr at ffffffffc05f322e [ocfs2]
#4 notify_change at ffffffff812a5a09
#5 do_truncate at ffffffff812808f5
#6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2
#7 sys_ftruncate at ffffffff81280d8e
#8 do_syscall_64 at ffffffff81003949
#9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad
dio completion path is going to complete one direct IO (decrement
inode->i_dio_count), but before that it hung at locking inode->i_rwsem:
#0 __schedule+700 at ffffffff818667cc
#1 schedule+54 at ffffffff81866de6
#2 rwsem_down_write_failed+536 at ffffffff8186aa28
#3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7
#4 down_write+45 at ffffffff81869c9d
#5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2]
#6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2]
#7 dio_complete+140 at ffffffff812c873c
#8 dio_aio_complete_work+25 at ffffffff812c89f9
#9 process_one_work+361 at ffffffff810b1889
#10 worker_thread+77 at ffffffff810b233d
#11 kthread+261 at ffffffff810b7fd5
#12 ret_from_fork+62 at ffffffff81a0035e
Thus above forms ABBA deadlock. The same deadlock was mentioned in
upstream commit 28f5a8a7c033 ("ocfs2: should wait dio before inode lock
in ocfs2_setattr()"). It seems that that commit only removed the
cluster lock (the victim of above dead lock) from the ABBA deadlock
party.
End-user visible effects: Process hang in truncate -> ocfs2_setattr path
and other processes hang at ocfs2_dio_end_io_write path.
This is to fix the deadlock itself. It removes inode_lock() call from
dio completion path to remove the deadlock and add ip_alloc_sem lock in
setattr path to synchronize the inode modifications.
[wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested]
Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com
Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
LLVM changed the expected function signature for llvm_gcda_emit_function()
in the clang-11 release. Users of clang-11 or newer may have noticed
their kernels producing invalid coverage information:
$ llvm-cov gcov -a -c -u -f -b <input>.gcda -- gcno=<input>.gcno
1 <func>: checksum mismatch, \
(<lineno chksum A>, <cfg chksum B>) != (<lineno chksum A>, <cfg chksum C>)
2 Invalid .gcda File!
...
Fix up the function signatures so calling this function interprets its
parameters correctly and computes the correct cfg checksum. In
particular, in clang-11, the additional checksum is no longer optional.
Link: https://reviews.llvm.org/rG25544ce2df0daa4304c07e64b9c8b0f7df60c11d
Link: https://lkml.kernel.org/r/20210408184631.1156669-1-ndesaulniers@google.com
Reported-by: Prasad Sodagudi <psodagud@quicinc.com>
Tested-by: Prasad Sodagudi <psodagud@quicinc.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org> [5.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit cb9f753a3731 ("mm: fix races between swapoff and flush dcache")
updated flush_dcache_page implementations on several architectures to
use page_mapping_file() in order to avoid races between page_mapping()
and swapoff().
This update missed arch/nds32 and there is a possibility of a race
there.
Replace page_mapping() with page_mapping_file() in nds32 implementation
of flush_dcache_page().
Link: https://lkml.kernel.org/r/20210330175126.26500-1-rppt@kernel.org
Fixes: cb9f753a3731 ("mm: fix races between swapoff and flush dcache")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Greentime Hu <green.hu@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When we do coredump for user process signal, this may be an SIGBUS signal
with BUS_MCEERR_AR or BUS_MCEERR_AO code, which means this signal is
resulted from ECC memory fail like SRAR or SRAO, we expect the memory
recovery work is finished correctly, then the get_dump_page() will not
return the error page as its process pte is set invalid by
memory_failure().
But memory_failure() may fail, and the process's related pte may not be
correctly set invalid, for current code, we will return the poison page,
get it dumped, and then lead to system panic as its in kernel code.
So check the poison status in get_dump_page(), and if TRUE, return NULL.
There maybe other scenario that is also better to check the posion status
and not to panic, so make a wrapper for this check, Thanks to David's
suggestion(<david@redhat.com>).
[akpm@linux-foundation.org: s/0/false/]
[yaoaili@kingsoft.com: is_page_poisoned() arg cannot be null, per Matthew]
Link: https://lkml.kernel.org/r/20210322115233.05e4e82a@alex-virtual-machine
Link: https://lkml.kernel.org/r/20210319104437.6f30e80d@alex-virtual-machine
Signed-off-by: Aili Yao <yaoaili@kingsoft.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Aili Yao <yaoaili@kingsoft.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Update Nick & Nadia's old addresses.
Link: https://lkml.kernel.org/r/20210406134036.GQ2531743@casper.infradead.org
Signed-off-by: Matthew Wilcox <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Nadia Yvette Chambers <nyc@holomorphy.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
jcrouse at codeaurora.org has started bouncing. Redirect to a more
permanent address.
Link: https://lkml.kernel.org/r/20210325143700.1490518-1-jordan@cosmicpenguin.net
Signed-off-by: Jordan Crouse <jordan@cosmicpenguin.net>
Cc: Alexander Lobakin <alobakin@pm.me>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change my e-mail address to kabel@kernel.org, and fix my name in
non-code parts (add diacritical mark).
Link: https://lkml.kernel.org/r/20210325171123.28093-2-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add all the files maintained by Turris team, not only for MOX, but also
for Omnia. Change website.
Link: https://lkml.kernel.org/r/20210325171123.28093-1-kabel@kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
napi_disable() is subject to an hangup, when the threaded
mode is enabled and the napi is under heavy traffic.
If the relevant napi has been scheduled and the napi_disable()
kicks in before the next napi_threaded_wait() completes - so
that the latter quits due to the napi_disable_pending() condition,
the existing code leaves the NAPI_STATE_SCHED bit set and the
napi_disable() loop waiting for such bit will hang.
This patch addresses the issue by dropping the NAPI_STATE_DISABLE
bit test in napi_thread_wait(). The later napi_threaded_poll()
iteration will take care of clearing the NAPI_STATE_SCHED.
This also addresses a related problem reported by Jakub:
before this patch a napi_disable()/napi_enable() pair killed
the napi thread, effectively disabling the threaded mode.
On the patched kernel napi_disable() simply stops scheduling
the relevant thread.
v1 -> v2:
- let the main napi_thread_poll() loop clear the SCHED bit
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/883923fa22745a9589e8610962b7dc59df09fb1f.1617981844.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some trivial spelling mistakes which caught my eye during the
review of the code.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethernet frame length is calculated incorrectly. Depending on
the value of RX_HEAD_PADDING, this may result in ethernet frames
that are too short (cut off at the end), or too long (garbage added
to the end).
Fix by calculating the ethernet frame length correctly. For added
clarity, use the ETH_FCS_LEN constant in the calculation.
Many thanks to Heiner Kallweit for suggesting this solution.
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Fixes: 3e21a10fdea3 ("lan743x: trim all 4 bytes of the FCS; not just 2")
Link: https://lore.kernel.org/lkml/20210408172353.21143-1-TheSven73@gmail.com/
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Tested-by: George McCollister <george.mccollister@gmail.com>
Link: https://lore.kernel.org/r/20210409003904.8957-1-TheSven73@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
[<vendor>,]nr-gpios property is used by some GPIO drivers[0] to indicate
the number of GPIOs present on a system, not define a GPIO. nr-gpios is
not configured by #gpio-cells and can't be parsed along with other
"*-gpios" properties.
nr-gpios without the "<vendor>," prefix is not allowed by the DT
spec[1], so only add exception for the ",nr-gpios" suffix and let the
error message continue being printed for non-compliant implementations.
[0] nr-gpios is referenced in Documentation/devicetree/bindings/gpio:
- gpio-adnp.txt
- gpio-xgene-sb.txt
- gpio-xlp.txt
- snps,dw-apb-gpio.yaml
[1] Link: https://github.com/devicetree-org/dt-schema/blob/cb53a16a1eb3e2169ce170c071e47940845ec26e/schemas/gpio/gpio-consumer.yaml#L20
Fixes errors such as:
OF: /palmbus@300000/gpio@600: could not find phandle
Fixes: 7f00be96f125 ("of: property: Add device link support for interrupt-parent, dmas and -gpio(s)")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Cc: stable@vger.kernel.org # v5.5+
Link: https://lore.kernel.org/r/20210405222540.18145-1-ilya.lipnitskiy@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Changeset 1ca9d1b1342d ("dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion")
renamed: Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
to: Documentation/devicetree/bindings/iio/adc/motorola,cpcap-adc.yaml.
Update its cross-reference accordingly.
Fixes: 1ca9d1b1342d ("dt-bindings:iio:adc:motorola,cpcap-adc yaml conversion")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/3e205e5fa701e4bc15d39d6ac1f57717df2bb4c6.1617972339.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
The iio-bindings.txt was converted into two files and merged
at the dt-schema git tree at:
https://github.com/devicetree-org/dt-schema
Yet, some documents still refer to the old file. Fix their
references, in order to point to the right URL.
Fixes: dba91f82d580 ("dt-bindings:iio:iio-binding.txt Drop file as content now in dt-schema")
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4efd81eca266ca0875d3bf9d1672097444146c69.1617972339.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
As documents have been renamed and moved around, their
references will break, but this will be unnoticed, as the
script which checks for it won't handle "../" references.
So, replace them by the full patch.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/68d3a1244119d1f2829c375b0ef554cf348bc89f.1617972339.git.mchehab+huawei@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
When we suspend the VM, the VDPA interface will be reset. When the VM is
resumed again, clear_virtqueues() will clear the available and used
indices resulting in hardware virqtqueue objects becoming out of sync.
We can avoid this function alltogether since qemu will clear them if
required, e.g. when the VM went through a reboot.
Moreover, since the hw available and used indices should always be
identical on query and should be restored to the same value same value
for virtqueues that complete in order, we set the single value provided
by set_vq_state(). In get_vq_state() we return the value of hardware
used index.
Fixes: b35ccebe3ef7 ("vdpa/mlx5: Restore the hardware used index after change map")
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-6-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
VIRTIO_F_VERSION_1 is a bit number. Use BIT_ULL() with mask
conditionals.
Also, in mlx5_vdpa_is_little_endian() use BIT_ULL for consistency with
the rest of the code.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-5-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
struct mlx5_core_dev has a bar_addr field that contains the correct bar
address for the function regardless of whether it is pci function or sub
function. Use it.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-4-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
In cases where the vdpa instance uses a SF (sub function), the DMA
device is the parent device. Use a function to retrieve the correct DMA
device.
Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-3-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
When feature VIRTIO_NET_F_MTU is negotiated on mlx5_vdpa,
22 extra bytes worth of MTU length is shown in guest.
This is because the mlx5_query_port_max_mtu API returns
the "hardware" MTU value, which does not just contain the
Ethernet payload, but includes extra lengths starting
from the Ethernet header up to the FCS altogether.
Fix the MTU so packets won't get dropped silently.
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eli Cohen <elic@nvidia.com>
Link: https://lore.kernel.org/r/20210408091047.4269-2-elic@nvidia.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
drivers/usb/core/hub.c: usb_new_device() contains the following:
/* By default, forbid autosuspend for all devices. It will be
* allowed for hubs during binding.
*/
usb_disable_autosuspend(udev);
So for anything which is not a hub, such as btusb devices, autosuspend is
disabled by default and we must call usb_enable_autosuspend(udev) to
enable it.
This means that the "Fix the autosuspend enable and disable" commit,
which drops the usb_enable_autosuspend() call when the enable_autosuspend
module option is true, is completely wrong, revert it.
This reverts commit 7bd9fb058d77213130e4b3e594115c028b708e7e.
Cc: Hui Wang <hui.wang@canonical.com>
Fixes: 7bd9fb058d77 ("Bluetooth: btusb: Fix the autosuspend enable and disable")
Acked-by: Hui Wang <hui.wang@canonical.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
nr_empty_pop_pages is used to guarantee that there are some free
populated pages to satisfy atomic allocations. Accounted and
non-accounted allocations are using separate sets of chunks,
so both need to have a surplus of empty pages.
This commit makes pcpu_nr_empty_pop_pages and the corresponding logic
per chunk type.
[Dennis]
This issue came up as I was reviewing [1] and realized I missed this.
Simultaneously, it was reported btrfs was seeing failed atomic
allocations in fsstress tests [2] and [3].
[1] https://lore.kernel.org/linux-mm/20210324190626.564297-1-guro@fb.com/
[2] https://lore.kernel.org/linux-mm/20210401185158.3275.409509F4@e16-tech.com/
[3] https://lore.kernel.org/linux-mm/CAL3q7H5RNBjCi708GH7jnczAOe0BLnacT9C+OBgA-Dx9jhB6SQ@mail.gmail.com/
Fixes: 3c7be18ac9a0 ("mm: memcg/percpu: account percpu memory to memory cgroups")
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Roman Gushchin <guro@fb.com>
Tested-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
|
|
Commit
334872a09198 ("x86/traps: Attempt to fixup exceptions in vDSO before signaling")
added return statements which bypass calling cond_local_irq_disable().
According to
ca4c6a9858c2 ("x86/traps: Make interrupt enable/disable symmetric in C code"),
cond_local_irq_disable() is needed because the asm return code no longer
disables interrupts. Follow the existing code as an example to use "goto
exit" instead of "return" statement.
[ bp: Massage commit message. ]
Fixes: 334872a09198 ("x86/traps: Attempt to fixup exceptions in vDSO before signaling")
Signed-off-by: Thomas Tai <thomas.tai@oracle.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://lkml.kernel.org/r/1617902914-83245-1-git-send-email-thomas.tai@oracle.com
|
|
nlh is being checked for validtity two times when it is dereferenced in
this function. Check for validity again when updating the flags through
nlh pointer to make the dereferencing safe.
CC: <stable@vger.kernel.org>
Addresses-Coverity: ("NULL pointer dereference")
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are a few more bits in the GSWIP_MII_CFG register for which we
did rely on the boot-loader (or the hardware defaults) to set them up
properly.
For some external RMII PHYs we need to select the GSWIP_MII_CFG_RMII_CLK
bit and also we should un-set it for non-RMII PHYs. The
GSWIP_MII_CFG_RMII_CLK bit is ignored for other PHY connection modes.
The GSWIP IP also supports in-band auto-negotiation for RGMII PHYs when
the GSWIP_MII_CFG_RGMII_IBS bit is set. Clear this bit always as there's
no known hardware which uses this (so it is not tested yet).
Clear the xMII isolation bit when set at initialization time if it was
previously set by the bootloader. Not doing so could lead to no traffic
(neither RX nor TX) on a port with this bit set.
While here, also add the GSWIP_MII_CFG_RESET bit. We don't need to
manage it because this bit is self-clearning when set. We still add it
here to get a better overview of the GSWIP_MII_CFG register.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Suggested-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
PHY auto polling on the GSWIP hardware can be used so link changes
(speed, link up/down, etc.) can be detected automatically. Internally
GSWIP reads the PHY's registers for this functionality. Based on this
automatic detection GSWIP can also automatically re-configure it's port
settings. Unfortunately this auto polling (and configuration) mechanism
seems to cause various issues observed by different people on different
devices:
- FritzBox 7360v2: the two Gbit/s ports (connected to the two internal
PHY11G instances) are working fine but the two Fast Ethernet ports
(using an AR8030 RMII PHY) are completely dead (neither RX nor TX are
received). It turns out that the AR8030 PHY sets the BMSR_ESTATEN bit
as well as the ESTATUS_1000_TFULL and ESTATUS_1000_XFULL bits. This
makes the PHY auto polling state machine (rightfully?) think that the
established link speed (when the other side is Gbit/s capable) is
1Gbit/s.
- None of the Ethernet ports on the Zyxel P-2812HNU-F1 (two are
connected to the internal PHY11G GPHYs while the other three are
external RGMII PHYs) are working. Neither RX nor TX traffic was
observed. It is not clear which part of the PHY auto polling state-
machine caused this.
- FritzBox 7412 (only one LAN port which is connected to one of the
internal GPHYs running in PHY22F / Fast Ethernet mode) was seeing
random disconnects (link down events could be seen). Sometimes all
traffic would stop after such disconnect. It is not clear which part
of the PHY auto polling state-machine cauased this.
- TP-Link TD-W9980 (two ports are connected to the internal GPHYs
running in PHY11G / Gbit/s mode, the other two are external RGMII
PHYs) was affected by similar issues as the FritzBox 7412 just without
the "link down" events
Switch to software based configuration instead of PHY auto polling (and
letting the GSWIP hardware configure the ports automatically) for the
following link parameters:
- link up/down
- link speed
- full/half duplex
- flow control (RX / TX pause)
After a big round of manual testing by various people (who helped test
this on OpenWrt) it turns out that this fixes all reported issues.
Additionally it can be considered more future proof because any
"quirk" which is implemented for a PHY on the driver side can now be
used with the GSWIP hardware as well because Linux is in control of the
link parameters.
As a nice side-effect this also solves a problem where fixed-links were
not supported previously because we were relying on the PHY auto polling
mechanism, which cannot work for fixed-links as there's no PHY from
where it can read the registers. Configuring the link settings on the
GSWIP ports means that we now use the settings from device-tree also for
ports with fixed-links.
Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Fixes: 3e6fdeb28f4c33 ("net: dsa: lantiq_gswip: Let GSWIP automatically set the xMII clock")
Cc: stable@vger.kernel.org
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Devicetree standard specifies an 8 byte alignment of the FDT.
Code in libfdt expects this alignment for an FDT image in memory.
kmemdup() returns 4 byte alignment on openrisc. Replace kmemdup()
with kmalloc(), align pointer, memcpy() to get proper alignment.
The 4 byte alignment exposed a related bug which triggered a crash
on openrisc with:
commit 79edff12060f ("scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9")
as reported in:
https://lore.kernel.org/lkml/20210327224116.69309-1-linux@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Link: https://lore.kernel.org/r/20210408204508.2276230-1-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Reproduce:
modprobe sch_teql
tc qdisc add dev teql0 root teql0
This leads to (for instance in Centos 7 VM) OOPS:
[ 532.366633] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8
[ 532.366733] IP: [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[ 532.366825] PGD 80000001376d5067 PUD 137e37067 PMD 0
[ 532.366906] Oops: 0000 [#1] SMP
[ 532.366987] Modules linked in: sch_teql ...
[ 532.367945] CPU: 1 PID: 3026 Comm: tc Kdump: loaded Tainted: G ------------ T 3.10.0-1062.7.1.el7.x86_64 #1
[ 532.368041] Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.2 04/01/2014
[ 532.368125] task: ffff8b7d37d31070 ti: ffff8b7c9fdbc000 task.ti: ffff8b7c9fdbc000
[ 532.368224] RIP: 0010:[<ffffffffc06124a8>] [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[ 532.368320] RSP: 0018:ffff8b7c9fdbf8e0 EFLAGS: 00010286
[ 532.368394] RAX: ffffffffc0612490 RBX: ffff8b7cb1565e00 RCX: ffff8b7d35ba2000
[ 532.368476] RDX: ffff8b7d35ba2000 RSI: 0000000000000000 RDI: ffff8b7cb1565e00
[ 532.368557] RBP: ffff8b7c9fdbf8f8 R08: ffff8b7d3fd1f140 R09: ffff8b7d3b001600
[ 532.368638] R10: ffff8b7d3b001600 R11: ffffffff84c7d65b R12: 00000000ffffffd8
[ 532.368719] R13: 0000000000008000 R14: ffff8b7d35ba2000 R15: ffff8b7c9fdbf9a8
[ 532.368800] FS: 00007f6a4e872740(0000) GS:ffff8b7d3fd00000(0000) knlGS:0000000000000000
[ 532.368885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 532.368961] CR2: 00000000000000a8 CR3: 00000001396ee000 CR4: 00000000000206e0
[ 532.369046] Call Trace:
[ 532.369159] [<ffffffff84c8192e>] qdisc_create+0x36e/0x450
[ 532.369268] [<ffffffff846a9b49>] ? ns_capable+0x29/0x50
[ 532.369366] [<ffffffff849afde2>] ? nla_parse+0x32/0x120
[ 532.369442] [<ffffffff84c81b4c>] tc_modify_qdisc+0x13c/0x610
[ 532.371508] [<ffffffff84c693e7>] rtnetlink_rcv_msg+0xa7/0x260
[ 532.372668] [<ffffffff84907b65>] ? sock_has_perm+0x75/0x90
[ 532.373790] [<ffffffff84c69340>] ? rtnl_newlink+0x890/0x890
[ 532.374914] [<ffffffff84c8da7b>] netlink_rcv_skb+0xab/0xc0
[ 532.376055] [<ffffffff84c63708>] rtnetlink_rcv+0x28/0x30
[ 532.377204] [<ffffffff84c8d400>] netlink_unicast+0x170/0x210
[ 532.378333] [<ffffffff84c8d7a8>] netlink_sendmsg+0x308/0x420
[ 532.379465] [<ffffffff84c2f3a6>] sock_sendmsg+0xb6/0xf0
[ 532.380710] [<ffffffffc034a56e>] ? __xfs_filemap_fault+0x8e/0x1d0 [xfs]
[ 532.381868] [<ffffffffc034a75c>] ? xfs_filemap_fault+0x2c/0x30 [xfs]
[ 532.383037] [<ffffffff847ec23a>] ? __do_fault.isra.61+0x8a/0x100
[ 532.384144] [<ffffffff84c30269>] ___sys_sendmsg+0x3e9/0x400
[ 532.385268] [<ffffffff847f3fad>] ? handle_mm_fault+0x39d/0x9b0
[ 532.386387] [<ffffffff84d88678>] ? __do_page_fault+0x238/0x500
[ 532.387472] [<ffffffff84c31921>] __sys_sendmsg+0x51/0x90
[ 532.388560] [<ffffffff84c31972>] SyS_sendmsg+0x12/0x20
[ 532.389636] [<ffffffff84d8dede>] system_call_fastpath+0x25/0x2a
[ 532.390704] [<ffffffff84d8de21>] ? system_call_after_swapgs+0xae/0x146
[ 532.391753] Code: 00 00 00 00 00 00 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b b7 48 01 00 00 48 89 fb <48> 8b 8e a8 00 00 00 48 85 c9 74 43 48 89 ca eb 0f 0f 1f 80 00
[ 532.394036] RIP [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql]
[ 532.395127] RSP <ffff8b7c9fdbf8e0>
[ 532.396179] CR2: 00000000000000a8
Null pointer dereference happens on master->slaves dereference in
teql_destroy() as master is null-pointer.
When qdisc_create() calls teql_qdisc_init() it imediately fails after
check "if (m->dev == dev)" because both devices are teql0, and it does
not set qdisc_priv(sch)->m leaving it zero on error path, then
qdisc_create() imediately calls teql_destroy() which does not expect
zero master pointer and we get OOPS.
Fixes: 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation")
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Setting iftoken can fail for several different reasons but there
and there was no report to user as to the cause. Add netlink
extended errors to the processing of the request.
This requires adding additional argument through rtnl_af_ops
set_link_af callback.
Reported-by: Hongren Zheng <li@zenithal.me>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With recent changes that separated action module load from action
initialization tcf_action_init() function error handling code was modified
to manually release the loaded modules if loading/initialization of any
further action in same batch failed. For the case when all modules
successfully loaded and some of the actions were initialized before one of
them failed in init handler. In this case for all previous actions the
module will be released twice by the error handler: First time by the loop
that manually calls module_put() for all ops, and second time by the action
destroy code that puts the module after destroying the action.
Reproduction:
$ sudo tc actions add action simple sdata \"2\" index 2
$ sudo tc actions add action simple sdata \"1\" index 1 \
action simple sdata \"2\" index 2
RTNETLINK answers: File exists
We have an error talking to the kernel
$ sudo tc actions ls action simple
total acts 1
action order 0: Simple <"2">
index 2 ref 1 bind 0
$ sudo tc actions flush action simple
$ sudo tc actions ls action simple
$ sudo tc actions add action simple sdata \"2\" index 2
Error: Failed to load TC action module.
We have an error talking to the kernel
$ lsmod | grep simple
act_simple 20480 -1
Fix the issue by modifying module reference counting handling in action
initialization code:
- Get module reference in tcf_idr_create() and put it in tcf_idr_release()
instead of taking over the reference held by the caller.
- Modify users of tcf_action_init_1() to always release the module
reference which they obtain before calling init function instead of
assuming that created action takes over the reference.
- Finally, modify tcf_action_init_1() to not release the module reference
when overwriting existing action as this is no longer necessary since both
upper and lower layers obtain and manage their own module references
independently.
Fixes: d349f9976868 ("net_sched: fix RTNL deadlock again caused by request_module()")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Action init code increments reference counter when it changes an action.
This is the desired behavior for cls API which needs to obtain action
reference for every classifier that points to action. However, act API just
needs to change the action and releases the reference before returning.
This sequence breaks when the requested action doesn't exist, which causes
act API init code to create new action with specified index, but action is
still released before returning and is deleted (unless it was referenced
concurrently by cls API).
Reproduction:
$ sudo tc actions ls action gact
$ sudo tc actions change action gact drop index 1
$ sudo tc actions ls action gact
Extend tcf_action_init() to accept 'init_res' array and initialize it with
action->ops->init() result. In tcf_action_add() remove pointers to created
actions from actions array before passing it to tcf_action_put_many().
Fixes: cae422f379f3 ("net: sched: use reference counting action init")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 6855e8213e06efcaf7c02a15e12b1ae64b9a7149.
Following commit in series fixes the issue without introducing regression
in error rollback of tcf_action_destroy().
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When I removed myself as a maintainer of the yaml file, I missed that
some maintainer is required. Oleksij is already listed in MAINTAINERS
for this file, so add him here as well.
Fixes: 1ae6b3780848 ("i2c: imx: drop me as maintainer of binding docs")
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
WARNING: CPU: 5 PID: 227 at fs/io_uring.c:8578 io_ring_exit_work+0xe6/0x470
RIP: 0010:io_ring_exit_work+0xe6/0x470
Call Trace:
process_one_work+0x206/0x400
worker_thread+0x4a/0x3d0
kthread+0x129/0x170
ret_from_fork+0x22/0x30
INFO: task lfs-openat:2359 blocked for more than 245 seconds.
task:lfs-openat state:D stack: 0 pid: 2359 ppid: 1 flags:0x00000004
Call Trace:
...
wait_for_completion+0x8b/0xf0
io_wq_destroy_manager+0x24/0x60
io_wq_put_and_exit+0x18/0x30
io_uring_clean_tctx+0x76/0xa0
__io_uring_files_cancel+0x1b9/0x2e0
do_exit+0xc0/0xb40
...
Even after io-wq destroy has been issued io-wq worker threads will
continue executing all left work items as usual, and may hang waiting
for I/O that won't ever complete (aka unbounded).
[<0>] pipe_read+0x306/0x450
[<0>] io_iter_do_read+0x1e/0x40
[<0>] io_read+0xd5/0x330
[<0>] io_issue_sqe+0xd21/0x18a0
[<0>] io_wq_submit_work+0x6c/0x140
[<0>] io_worker_handle_work+0x17d/0x400
[<0>] io_wqe_worker+0x2c0/0x330
[<0>] ret_from_fork+0x22/0x30
Cancel all unbounded I/O instead of executing them. This changes the
user visible behaviour, but that's inevitable as io-wq is not per task.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/cd4b543154154cba055cf86f351441c2174d7f71.1617842918.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
WARNING: at fs/io_uring.c:8578 io_ring_exit_work.cold+0x0/0x18
As reissuing is now passed back by REQ_F_REISSUE and kiocb_done()
internally uses __io_complete_rw(), it may stop after setting the flag
so leaving a dangling request.
There are tricky edge cases, e.g. reading beyound file, boundary, so
the easiest way is to hand code reissue in kiocb_done() as
__io_complete_rw() was doing for us before.
Fixes: 230d50d448ac ("io_uring: move reissue into regular IO path")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/f602250d292f8a84cca9a01d747744d1e797be26.1617842918.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The nla_len() is less than or equal to 16. If it's less than 16 then end
of the "gid" buffer is uninitialized.
Fixes: ae43f8286730 ("IB/core: Add IP to GID netlink offload")
Link: https://lore.kernel.org/r/20210405074434.264221-1-leon@kernel.org
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In ice_suspend(), ice_clear_interrupt_scheme() is called, and then
irq_free_descs() will be eventually called to free irq and its descriptor.
In ice_resume(), ice_init_interrupt_scheme() is called to allocate new
irqs. However, in ice_rebuild_arfs(), struct irq_glue and struct cpu_rmap
maybe cannot be freed, if the irqs that released in ice_suspend() were
reassigned to other devices, which makes irq descriptor's affinity_notify
lost.
So call ice_free_cpu_rx_rmap() before ice_clear_interrupt_scheme(), which
can make sure all irq_glue and cpu_rmap can be correctly released before
corresponding irq and descriptor are released.
Fix the following memory leak.
unreferenced object 0xffff95bd951afc00 (size 512):
comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s)
hex dump (first 32 bytes):
18 00 00 00 18 00 18 00 70 fc 1a 95 bd 95 ff ff ........p.......
00 00 ff ff 01 00 ff ff 02 00 ff ff 03 00 ff ff ................
backtrace:
[<0000000072e4b914>] __kmalloc+0x336/0x540
[<0000000054642a87>] alloc_cpu_rmap+0x3b/0xb0
[<00000000f220deec>] ice_set_cpu_rx_rmap+0x6a/0x110 [ice]
[<000000002370a632>] ice_probe+0x941/0x1180 [ice]
[<00000000d692edba>] local_pci_probe+0x47/0xa0
[<00000000503934f0>] work_for_cpu_fn+0x1a/0x30
[<00000000555a9e4a>] process_one_work+0x1dd/0x410
[<000000002c4b414a>] worker_thread+0x221/0x3f0
[<00000000bb2b556b>] kthread+0x14c/0x170
[<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30
unreferenced object 0xffff95bd81b0a2a0 (size 96):
comm "kworker/0:1", pid 134, jiffies 4294684283 (age 13051.958s)
hex dump (first 32 bytes):
38 00 00 00 01 00 00 00 e0 ff ff ff 0f 00 00 00 8...............
b0 a2 b0 81 bd 95 ff ff b0 a2 b0 81 bd 95 ff ff ................
backtrace:
[<00000000582dd5c5>] kmem_cache_alloc_trace+0x31f/0x4c0
[<000000002659850d>] irq_cpu_rmap_add+0x25/0xe0
[<00000000495a3055>] ice_set_cpu_rx_rmap+0xb4/0x110 [ice]
[<000000002370a632>] ice_probe+0x941/0x1180 [ice]
[<00000000d692edba>] local_pci_probe+0x47/0xa0
[<00000000503934f0>] work_for_cpu_fn+0x1a/0x30
[<00000000555a9e4a>] process_one_work+0x1dd/0x410
[<000000002c4b414a>] worker_thread+0x221/0x3f0
[<00000000bb2b556b>] kthread+0x14c/0x170
[<00000000ad2cf1cd>] ret_from_fork+0x1f/0x30
Fixes: 769c500dcc1e ("ice: Add advanced power mgmt for WoL")
Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Set proper return values inside error checking if-statements.
Previously following warning was produced when compiling against sparse.
i40e_main.c:15162 i40e_init_recovery_mode() warn: missing error code 'err'
Fixes: 4ff0ee1af0169 ("i40e: Introduce recovery mode support")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Remove vsi->netdev->name from the trace.
This is redundant information. With the devinfo trace, the adapter
is already identifiable.
Previously following error was produced when compiling against sparse.
i40e_main.c:2571 i40e_sync_vsi_filters() error:
we previously assumed 'vsi->netdev' could be null (see line 2323)
Fixes: b603f9dc20af ("i40e: Log info when PF is entering and leaving Allmulti mode.")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Init pointer with NULL in default switch case statement.
Previously the error was produced when compiling against sparse.
i40e_debugfs.c:582 i40e_dbg_dump_desc() error: uninitialized symbol 'ring'.
Fixes: 44ea803e2fa7 ("i40e: introduce new dump desc XDP command")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
Christophe JAILLET
Angelo Dureghello
Linus Torvalds
Naohiro Aota
Julian Braha
Marco Elver
Andrew Morton
Andrey Konovalov
Jack Qiu
Sergei Trofimovich
Wengang Wang
Nick Desaulniers
Mike Rapoport
Aili Yao
Matthew Wilcox
Jordan Crouse
Marek Behún
Paolo Abeni
Salil Mehta
Sven Van Asbroeck
Ilya Lipnitskiy
Mauro Carvalho Chehab
Eli Cohen
Si-Wei Liu
Hans de Goede
Roman Gushchin
Thomas Tai
Muhammad Usama Anjum
Martin Blumenstingl
Frank Rowand
Pavel Tikhomirov
Stephen Hemminger
Vlad Buslov
Wolfram Sang
Pavel Begunkov
Leon Romanovsky
Yongxin Liu
Arkadiusz Kubalewski