| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As the mask is part of the enum, document it.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20241102132841.2446176-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Cc: stable@vger.kernel.org # v5.17
Fixes: 05be23ef78f7 ("i3c: master: svc: add runtime pm support")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240930091913.2545510-1-ruanjinjie@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Current MIPI I3C HCI specification versions pre-1.0, 1.0. 1.1 and 1.2
don't have cascaded interrupt bits for the PIO and DMA (ring headers) in
the INTR_STATUS register as implemented currently in the code. Instead
bits 9:0 are marked as reserved with unspecified reset value.
To my understanding they were planned to be introduced in the version 2
and the original commit 9ad9a52cce28 ("i3c/master: introduce the
mipi-i3c-hci driver") was coding ahead according to a draft. With
remarks though.
This is causing that the DMA handler is not called until at least one
reserved bit 7:0 is set in the INTR_STATUS.
Since it looks that idea was dropped in later official versions and to
make able to handle DMA interrupts on an HW that is implemented
according to current specifications call assigned PIO or DMA IO handler
unconditionally.
While doing so remove cascaded interrupt bit definitions and the mask
argument passed to the handler functions.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240920144432.62370-3-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Bus cleanup path in DMA mode may trigger a RING_OP_STAT interrupt when
the ring is being stopped. Depending on timing between ring stop request
completion, interrupt handler removal and code execution this may lead
to a NULL pointer dereference in hci_dma_irq_handler() if it gets to run
after the io_data pointer is set to NULL in hci_dma_cleanup().
Prevent this my masking the ring interrupts before ring stop request.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/r/20240920144432.62370-2-jarkko.nikula@linux.intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
if (dev->boardinfo && dev->boardinfo->init_dyn_addr)
^^^ here check "init_dyn_addr"
i3c_bus_set_addr_slot_status(&master->bus, dev->info.dyn_addr, ...)
^^^^
free "dyn_addr"
Fix copy/paste error "dyn_addr" by replacing it with "init_dyn_addr".
Cc: stable@kernel.org
Fixes: 3a379bbcea0a ("i3c: Add core I3C infrastructure")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241001162608.224039-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When a new device hotjoins, a new dynamic address is assigned.
i3c_master_add_i3c_dev_locked() identifies that the device was previously
attached to the bus and locates the olddev.
i3c_master_add_i3c_dev_locked()
{
...
olddev = i3c_master_search_i3c_dev_duplicate(newdev);
...
if (olddev) {
...
i3c_dev_disable_ibi_locked(olddev);
^^^^^^
The olddev should not receive any commands on the i3c bus as it
does not exist and has been assigned a new address. This will
result in NACK or timeout. So remove it.
}
i3c_dev_free_ibi_locked(olddev);
^^^^^^^^
This function internally calls i3c_dev_disable_ibi_locked() function
causing to send DISEC command with old Address.
The olddev should not receive any commands on the i3c bus as it
does not exist and has been assigned a new address. This will
result in NACK or timeout. So, update the olddev->ibi->enabled
flag to false to avoid DISEC with OldAddr.
}
Include part of Ravindra Yashvant Shinde's work:
https://lore.kernel.org/linux-i3c/20240820151917.3904956-1-ravindra.yashvant.shinde@nxp.com/T/#u
Fixes: 317bacf960a4 ("i3c: master: add enable(disable) hot join in sys entry")
Co-developed-by: Ravindra Yashvant Shinde <ravindra.yashvant.shinde@nxp.com>
Signed-off-by: Ravindra Yashvant Shinde <ravindra.yashvant.shinde@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241001162232.223724-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
svc_i3c_master_do_daa() {
...
for (i = 0; i < dev_nb; i++) {
ret = i3c_master_add_i3c_dev_locked(m, addrs[i]);
if (ret)
goto rpm_out;
}
}
If two devices (A and B) are detected in DAA and address 0xa is assigned to
device A and 0xb to device B, a failure in i3c_master_add_i3c_dev_locked()
for device A (addr: 0xa) could prevent device B (addr: 0xb) from being
registered on the bus. The I3C stack might still consider 0xb a free
address. If a subsequent Hotjoin occurs, 0xb might be assigned to Device A,
causing both devices A and B to use the same address 0xb, violating the I3C
specification.
The return value for i3c_master_add_i3c_dev_locked() should not be checked
because subsequent steps will scan the entire I3C bus, independent of
whether i3c_master_add_i3c_dev_locked() returns success.
If device A registration fails, there is still a chance to register device
B. i3c_master_add_i3c_dev_locked() can reset DAA if a failure occurs while
retrieving device information.
Cc: stable@kernel.org
Fixes: 317bacf960a4 ("i3c: master: add enable(disable) hot join in sys entry")
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241002-svc-i3c-hj-v6-6-7e6e1d3569ae@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Wait for the controller to complete emitting ACK/NACK, otherwise the next
command may be omitted by the hardware.
Add a "command done" check in svc_i3c_master_nack(ack)_ibi() and change the
return type to int to flag possible timeouts.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241002-svc-i3c-hj-v6-5-7e6e1d3569ae@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
According to I3C spec ver 1.1, 09-Jun-2021, section 5.1.2.5:
The I3C Controller shall hold SCL low while the Bus is in ACK/NACK Phase of
I3C/I2C transfer. But maximum stall time is 100us. The IRQs have to be
disabled to prevent schedule during the whole I3C transaction, otherwise,
the I3C bus timeout may happen if any irq or schedule happen during
transaction.
Replace mutex with spin_lock_irqsave() to avoid stalling SCL more than
100us.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241002-svc-i3c-hj-v6-4-7e6e1d3569ae@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When sending REQUEST_PROC_DAA, emit START and address 7E. Address
arbitration may occur at this time if other devices trigger HJ, IBI, or
CR events.
When IBIWON happen during a REQUEST_PROC_DAA, NACK the IBI request then
send a repeated start to continue current dynamic address assignment.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241002-svc-i3c-hj-v6-3-7e6e1d3569ae@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
When the address is arbitrated at send address, the hardware can auto-send
NACK if it is an IBI. However, manual emission of NACK/ACK is needed for
hot join or controller request events.
Add help function svc_i3c_master_handle_ibi_won() to check event type and
send out NACK if the event is not an IBI.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241002-svc-i3c-hj-v6-2-7e6e1d3569ae@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
There is a possibility of an IBI WIN occurring when addressing issues, even
when sending CCC commands. Most of the time, returning -EAGAIN is
acceptable, but the case below becomes highly complex.
When a Hotjoin event occurs:
- i3c_master_do_daa()
- i3c_master_add_i3c_dev_locked()
- A dynamic address (e.g., 0x9) is already set during DAA.
- i3c_master_getpid_locked()
- Another device issues HJ or IBI here. Returning -EAGAIN causes
failure in adding the new device. However, the dynamic address(0x9)
has already been assigned to this device. If another device issues
HJ, it will get this address 0x9 again, causing two devices on the
bus to use the same dynamic address 0x9.
- Attempting to send RSTDAA when the first device fails at
i3c_master_getpid_locked() could also fail when sending RSTDAA for
the same reason.
According to the I3C spec, address arbitration only happens at START, never
at REPEAT start. Using repeat start when an IBI WIN occurs simplifies this
case, as i3c_master_getpid_locked() will not return an error when another
device tries to send HJ or IBI.
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241002-svc-i3c-hj-v6-1-7e6e1d3569ae@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
If the DTS contains 'assigned-address', a dynamic address leak occurs
during hotjoin events.
Assume a device have assigned-address 0xb.
- Device issue Hotjoin
- Call i3c_master_do_daa()
- Call driver xxx_do_daa()
- Call i3c_master_get_free_addr() to get dynamic address 0x9
- i3c_master_add_i3c_dev_locked(0x9)
- expected_dyn_addr = newdev->boardinfo->init_dyn_addr (0xb);
- i3c_master_reattach_i3c_dev(newdev(0xb), old_dyn_addr(0x9));
- if (dev->info.dyn_addr != old_dyn_addr &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 0xb != 0x9 -> TRUE
(!dev->boardinfo ||
^^^^^^^^^^^^^^^ -> FALSE
dev->info.dyn_addr != dev->boardinfo->init_dyn_addr)) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
0xb != 0xb -> FALSE
...
i3c_bus_set_addr_slot_status(&master->bus, old_dyn_addr,
I3C_ADDR_SLOT_FREE);
^^^
This will be skipped. So old_dyn_addr never free
}
- i3c_master_get_free_addr() will return increased sequence number.
Remove dev->info.dyn_addr != dev->boardinfo->init_dyn_addr condition check.
dev->info.dyn_addr should be checked before calling this function because
i3c_master_setnewda_locked() has already been called and the target device
has already accepted dyn_addr. It is too late to check if dyn_addr is free
in i3c_master_reattach_i3c_dev().
Add check to ensure expected_dyn_addr is free before
i3c_master_setnewda_locked().
Fixes: cc3a392d69b6 ("i3c: master: fix for SETDASA and DAA process")
Cc: stable@kernel.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-3-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Extend the address status bit to 4 and introduce the
I3C_ADDR_SLOT_EXT_DESIRED macro to indicate that a device prefers a
specific address. This is generally set by the 'assigned-address' in the
device tree source (dts) file.
┌────┬─────────────┬───┬─────────┬───┐
│S/Sr│ 7'h7E RnW=0 │ACK│ ENTDAA │ T ├────┐
└────┴─────────────┴───┴─────────┴───┘ │
┌─────────────────────────────────────────┘
│ ┌──┬─────────────┬───┬─────────────────┬────────────────┬───┬─────────┐
└─►│Sr│7'h7E RnW=1 │ACK│48bit UID BCR DCR│Assign 7bit Addr│PAR│ ACK/NACK│
└──┴─────────────┴───┴─────────────────┴────────────────┴───┴─────────┘
Some master controllers (such as HCI) need to prepare the entire above
transaction before sending it out to the I3C bus. This means that a 7-bit
dynamic address needs to be allocated before knowing the target device's
UID information.
However, some I3C targets may request specific addresses (called as
"init_dyn_addr"), which is typically specified by the DT-'s
assigned-address property. Lower addresses having higher IBI priority. If
it is available, i3c_bus_get_free_addr() preferably return a free address
that is not in the list of desired addresses (called as "init_dyn_addr").
This allows the device with the "init_dyn_addr" to switch to its
"init_dyn_addr" when it hot-joins the I3C bus. Otherwise, if the
"init_dyn_addr" is already in use by another I3C device, the target device
will not be able to switch to its desired address.
If the previous step fails, fallback returning one of the remaining
unassigned address, regardless of its state in the desired list.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-2-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Replace the hardcoded value 2, which indicates 2 bits for I3C address
status, with the predefined macro I3C_ADDR_SLOT_STATUS_BITS.
Improve maintainability and extensibility of the code.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20241021-i3c_dts_assign-v8-1-4098b8bde01e@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
|
|
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:
- x
+ y
not:
(
- x
+ y
)
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_yes_no()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_on_off()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_write_read()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_read_write()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_enable{d}_
disable{d}() to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_lo{w}_hi{gh}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_hi{gh}_lo{w}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As done with str_true_false(), add checks for str_false_true()
opportunities. A simple test can find over 9 cases currently
exist in the tree.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
After str_true_false() has been introduced in the tree,
we can add rules for finding places where str_true_false()
can be used. A simple test can find over 10 locations.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
if an inode backpointer points to a dirent that doesn't point back,
that's an error we should warn about.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the reader acquires the read lock and then the writer enters the slow
path, while the reader proceeds to the unlock path, the following scenario
can occur without the change:
writer: pcpu_read_count(lock) return 1 (so __do_six_trylock will return 0)
reader: this_cpu_dec(*lock->readers)
reader: smp_mb()
reader: state = atomic_read(&lock->state) (there is no waiting flag set)
writer: six_set_bitmask()
then the writer will sleep forever.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we shut down successfully, there shouldn't be any logged ops to
resume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a filesystem flag to indicate whether we did a clean recovery -
using c->sb.clean after we've got rw is incorrect, since c->sb is
updated whenever we write the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had a bug where disk accounting keys didn't always have their version
field set in journal replay; change the BUG_ON() to a WARN(), and
exclude this case since it's now checked for elsewhere (in the bkey
validate function).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was added to avoid double-counting accounting keys in journal
replay. But applied incorrectly (easily done since it applies to the
transaction commit, not a particular update), it leads to skipping
in-mem accounting for real accounting updates, and failure to give them
a version number - which leads to journal replay becoming very confused
the next time around.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
give bversions a more distinct name, to aid in grepping
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, check_inode() would delete unlinked inodes if they weren't
on the deleted list - this code dating from before there was a deleted
list.
But, if we crash during a logged op (truncate or finsert/fcollapse) of
an unlinked file, logged op resume will get confused if the inode has
already been deleted - instead, just add it to the deleted list if it
needs to be there; delete_dead_inodes runs after logged op resume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BCH_SB_ERRS() has a field for the actual enum val so that we can reorder
to reorganize, but the way BCH_SB_ERR_MAX was defined didn't allow for
this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
__bch2_fsck_err() warns if the current task has a btree_trans object and
it wasn't passed in, because if it has to prompt for user input it has
to be able to unlock it.
But plumbing the btree_trans through bkey_validate(), as well as
transaction restarts, is problematic - so instead make bkey fsck errors
FSCK_AUTOFIX, which doesn't need to warn.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
In order to check for accounting keys with version=0, we need to run
validation after they've been assigned version numbers.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This fixes the following bug, where a disk accounting key has an invalid
replicas entry, and we attempt to add it to the superblock:
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): starting version 1.12: rebalance_work_acct_fix opts=metadata_replicas=2,data_replicas=2,foreground_target=ssd,background_target=hdd,nopromote_whole_extents,verbose,fsck,fix_errors=yes
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): recovering from clean shutdown, journal seq 15211644
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): accounting_read...
accounting not marked in superblock replicas
replicas cached: 1/1 [0], fixing
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): sb invalid before write: Invalid superblock section replicas_v0: invalid device 0 in entry cached: 1/1 [0]
replicas_v0 (size 88):
user: 2 [3 5] user: 2 [1 4] cached: 1 [2] btree: 2 [1 2] user: 2 [2 5] cached: 1 [0] cached: 1 [4] journal: 2 [1 5] user: 2 [1 2] user: 2 [2 3] user: 2 [3 4] user: 2 [4 5] cached: 1 [1] cached: 1 [3] cached: 1 [5] journal: 2 [1 2] journal: 2 [2 5] btree: 2 [2 5] user: 2 [1 3] user: 2 [1 5] user: 2 [2 4]
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): inconsistency detected - emergency read only at journal seq 15211644
accounting not marked in superblock replicas
replicas user: 1/1 [3], fixing
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): sb invalid before write: Invalid superblock section replicas_v0: invalid device 0 in entry cached: 1/1 [0]
replicas_v0 (size 96):
user: 2 [3 5] user: 2 [1 3] cached: 1 [2] btree: 2 [1 2] user: 2 [2 4] cached: 1 [0] cached: 1 [4] journal: 2 [1 5] user: 1 [3] user: 2 [1 5] user: 2 [3 4] user: 2 [4 5] cached: 1 [1] cached: 1 [3] cached: 1 [5] journal: 2 [1 2] journal: 2 [2 5] btree: 2 [2 5] user: 2 [1 2] user: 2 [1 4] user: 2 [2 3] user: 2 [2 5]
accounting not marked in superblock replicas
replicas user: 1/2 [3 7], fixing
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): sb invalid before write: Invalid superblock section replicas_v0: invalid device 7 in entry user: 1/2 [3 7]
replicas_v0 (size 96):
user: 2 [3 7] user: 2 [1 3] cached: 1 [2] btree: 2 [1 2] user: 2 [2 4] cached: 1 [0] cached: 1 [4] journal: 2 [1 5] user: 1 [3] user: 2 [1 5] user: 2 [3 4] user: 2 [4 5] cached: 1 [1] cached: 1 [3] cached: 1 [5] journal: 2 [1 2] journal: 2 [2 5] btree: 2 [2 5] user: 2 [1 2] user: 2 [1 4] user: 2 [2 3] user: 2 [2 5] user: 2 [3 5]
done
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): alloc_read... done
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): stripes_read... done
bcachefs (3c0860e8-07ca-4276-8954-11c1774be868): snapshots_read... done
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
accounting read was checking if accounting replicas entries were marked
in the superblock prior to applying accounting from the journal,
which meant that a recently removed device could spuriously trigger a
"not marked in superblocked" error (when journal entries zero out the
offending counter).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Minor refactoring - replace multiple bool arguments with an enum; prep
work for fixing a bug in accounting read.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Dealing with outside state within a btree transaction is always tricky.
check_extents() and check_dirents() have to accumulate counters for
i_sectors and i_nlink (for subdirectories). There were two bugs:
- transaction commit may return a restart; therefore we have to commit
before accumulating to those counters
- get_inode_all_snapshots() may return a transaction restart, before
updating w->last_pos; then, on the restart,
check_i_sectors()/check_subdir_count() would see inodes that were not
for w->last_pos
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
dead code
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Returning a positive integer instead of an error code causes error paths
to become very confused.
Closes: syzbot+c0360e8367d6d8d04a66@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The pointer clean points the memory allocated by kmemdup, when the
return value of bch2_sb_clean_validate_late is not zero. The memory
pointed by clean is leaked. So we should free it in this case.
Fixes: a37ad1a3aba9 ("bcachefs: sb-clean.c")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
Alexandre Belloni
Jinjie Ruan
Jarkko Nikula
Frank Li
Linus Torvalds
Julia Lawall
Hongbo Li
Kent Overstreet
Alan Huang