| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add bound flag to rule and chain transactions as in 6a0a8d10a366
("netfilter: nf_tables: use-after-free in failing rule with bound set")
to skip them in case that the chain is already bound from the abort
path.
This patch fixes an imbalance in the chain use refcnt that triggers a
WARN_ON on the table and chain destroy path.
This patch also disallows nested chain bindings, which is not
supported from userspace.
The logic to deal with chain binding in nft_data_hold() and
nft_data_release() is not correct. The NFT_TRANS_PREPARE state needs a
special handling in case a chain is bound but next expressions in the
same rule fail to initialize as described by 1240eb93f061 ("netfilter:
nf_tables: incorrect error path handling with NFT_MSG_NEWRULE").
The chain is left bound if rule construction fails, so the objects
stored in this chain (and the chain itself) are released by the
transaction records from the abort path, follow up patch ("netfilter:
nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain")
completes this error handling.
When deleting an existing rule, chain bound flag is set off so the
rule expression .destroy path releases the objects.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When using encapsulation the original packet's headers are copied to the
inner headers. This preserves the space for an inner mac header, which
is not used by the inner payloads for the encapsulation types supported
by IPVS. If a packet is using GUE or GRE encapsulation and needs to be
segmented, flow can be passed to __skb_udp_tunnel_segment() which
calculates a negative tunnel header length. A negative tunnel header
length causes pskb_may_pull() to fail, dropping the packet.
This can be observed by attaching probes to ip_vs_in_hook(),
__dev_queue_xmit(), and __skb_udp_tunnel_segment():
perf probe --add '__dev_queue_xmit skb->inner_mac_header \
skb->inner_network_header skb->mac_header skb->network_header'
perf probe --add '__skb_udp_tunnel_segment:7 tnl_hlen'
perf probe -m ip_vs --add 'ip_vs_in_hook skb->inner_mac_header \
skb->inner_network_header skb->mac_header skb->network_header'
These probes the headers and tunnel header length for packets which
traverse the IPVS encapsulation path. A TCP packet can be forced into
the segmentation path by being smaller than a calculated clamped MSS,
but larger than the advertised MSS.
probe:ip_vs_in_hook: inner_mac_header=0x0 inner_network_header=0x0 mac_header=0x44 network_header=0x52
probe:ip_vs_in_hook: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
probe:dev_queue_xmit: inner_mac_header=0x44 inner_network_header=0x52 mac_header=0x44 network_header=0x32
probe:__skb_udp_tunnel_segment_L7: tnl_hlen=-2
When using veth-based encapsulation, the interfaces are set to be
mac-less, which does not preserve space for an inner mac header. This
prevents this issue from occurring.
In our real-world testing of sending a 32KB file we observed operation
time increasing from ~75ms for veth-based encapsulation to over 1.5s
using IPVS encapsulation due to retries from dropped packets.
This changeset modifies the packet on the encapsulation path in
ip_vs_tunnel_xmit() and ip_vs_tunnel_xmit_v6() to remove the inner mac
header offset. This fixes UDP segmentation for both encapsulation types,
and corrects the inner headers for any IPIP flows that may use it.
Fixes: 84c0d5e96f3a ("ipvs: allow tunneling with gue encapsulation")
Signed-off-by: Terin Stock <terin@cloudflare.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
In case the QCA7000 is not available via SPI (e.g. in reset),
the driver will cause a high load. The reason for this is
that the synchronization is never finished and schedule()
is never called. Since the synchronization is not timing
critical, it's safe to drop this from the scheduling condition.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If the core is left to remove the LEDs via devm_, it is performed too
late, after the PHY driver is removed from the PHY. This results in
dereferencing a NULL pointer when the LED core tries to turn the LED
off before destroying the LED.
Manually unregister the LEDs at a safe point in phy_remove.
Cc: stable@vger.kernel.org
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: 01e5b728e9e4 ("net: phy: Add a binding for PHY LEDs")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The module loads firmware so add MODULE_FIRMWARE macros to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The module loads firmware so add a MODULE_FIRMWARE macro to provide that
information via modinfo.
Signed-off-by: Juerg Haefliger <juerg.haefliger@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When running workloads heavy unbalanced towards TX (high TX, low RX
traffic), sfc driver can retain the CPU during too long times. Although
in many cases this is not enough to be visible, it can affect
performance and system responsiveness.
A way to reproduce it is to use a debug kernel and run some parallel
netperf TX tests. In some systems, this will lead to this message being
logged:
kernel:watchdog: BUG: soft lockup - CPU#12 stuck for 22s!
The reason is that sfc driver doesn't account any NAPI budget for the TX
completion events work. With high-TX/low-RX traffic, this makes that the
CPU is held for long time for NAPI poll.
Documentations says "drivers can process completions for any number of Tx
packets but should only process up to budget number of Rx packets".
However, many drivers do limit the amount of TX completions that they
process in a single NAPI poll.
In the same way, this patch adds a limit for the TX work in sfc. With
the patch applied, the watchdog warning never appears.
Tested with netperf in different combinations: single process / parallel
processes, TCP / UDP and different sizes of UDP messages. Repeated the
tests before and after the patch, without any noticeable difference in
network or CPU performance.
Test hardware:
Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz (4 cores, 2 threads/core)
Solarflare Communications XtremeScale X2522-25G Network Adapter
Fixes: 5227ecccea2d ("sfc: remove tx and MCDI handling from NAPI budget consideration")
Fixes: d19a53721863 ("sfc_ef100: TX path for EF100 NICs")
Reported-by: Fei Liu <feliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230615084929.10506-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ASO query can be scheduled in atomic context as such it can't use usleep.
Use udelay as recommended in Documentation/timers/timers-howto.rst.
Fixes: 76e463f6508b ("net/mlx5e: Overcome slow response for first IPsec ASO WQE")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
XFRM state which is changed to be XFRM_STATE_EXPIRED doesn't really
need to hold lock while modifying flow steering rules to drop traffic.
That state can be deleted only and as such mlx5e_ipsec_handle_tx_limit()
work will be canceled anyway and won't run in parallel.
Fixes: b2f7b01d36a9 ("net/mlx5e: Simulate missing IPsec TX limits hardware functionality")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Previously during mlx5e_ipsec_handle_event the driver tried to execute
an operation that could sleep, while holding a spinlock, which caused
the kernel panic mentioned below.
Move the function call that can sleep outside of the spinlock context.
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x6c
__schedule_bug.cold+0x42/0x4e
schedule_debug.constprop.0+0xe0/0x118
__schedule+0x59/0x58a
? __mod_timer+0x2a1/0x3ef
schedule+0x5e/0xd4
schedule_timeout+0x99/0x164
? __pfx_process_timeout+0x10/0x10
__wait_for_common+0x90/0x1da
? __pfx_schedule_timeout+0x10/0x10
wait_func+0x34/0x142 [mlx5_core]
mlx5_cmd_invoke+0x1f3/0x313 [mlx5_core]
cmd_exec+0x1fe/0x325 [mlx5_core]
mlx5_cmd_do+0x22/0x50 [mlx5_core]
mlx5_cmd_exec+0x1c/0x40 [mlx5_core]
mlx5_modify_ipsec_obj+0xb2/0x17f [mlx5_core]
mlx5e_ipsec_update_esn_state+0x69/0xf0 [mlx5_core]
? wake_affine+0x62/0x1f8
mlx5e_ipsec_handle_event+0xb1/0xc0 [mlx5_core]
process_one_work+0x1e2/0x3e6
? __pfx_worker_thread+0x10/0x10
worker_thread+0x54/0x3ad
? __pfx_worker_thread+0x10/0x10
kthread+0xda/0x101
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x37
</TASK>
BUG: workqueue leaked lock or atomic: kworker/u256:4/0x7fffffff/189754#012 last function: mlx5e_ipsec_handle_event [mlx5_core]
CPU: 66 PID: 189754 Comm: kworker/u256:4 Kdump: loaded Tainted: G W 6.2.0-2596.20230309201517_5.el8uek.rc1.x86_64 #2
Hardware name: Oracle Corporation ORACLE SERVER X9-2/ASMMBX9-2, BIOS 61070300 08/17/2022
Workqueue: mlx5e_ipsec: eth%d mlx5e_ipsec_handle_event [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x49/0x6c
process_one_work.cold+0x2b/0x3c
? __pfx_worker_thread+0x10/0x10
worker_thread+0x54/0x3ad
? __pfx_worker_thread+0x10/0x10
kthread+0xda/0x101
? __pfx_kthread+0x10/0x10
ret_from_fork+0x29/0x37
</TASK>
BUG: scheduling while atomic: kworker/u256:4/189754/0x00000000
Fixes: cee137a63431 ("net/mlx5e: Handle ESN update events")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
XFRM core provides two callbacks to release resources, one is .xdo_dev_policy_delete()
and another is .xdo_dev_policy_free(). This separation allows delayed release so
"ip xfrm policy free" commands won't starve. Unfortunately, mlx5 command interface
can't run in .xdo_dev_policy_free() callbacks as the latter runs in ATOMIC context.
BUG: scheduling while atomic: swapper/7/0/0x00000100
Modules linked in: act_mirred act_tunnel_key cls_flower sch_ingress vxlan mlx5_vdpa vringh vhost_iotlb vdpa rpcrdma rdma_ucm ib_iser libiscsi ib_umad scsi_transport_iscsi rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_core zram zsmalloc fuse
CPU: 7 PID: 0 Comm: swapper/7 Not tainted 6.3.0+ #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x33/0x50
__schedule_bug+0x4e/0x60
__schedule+0x5d5/0x780
? __mod_timer+0x286/0x3d0
schedule+0x50/0x90
schedule_timeout+0x7c/0xf0
? __bpf_trace_tick_stop+0x10/0x10
__wait_for_common+0x88/0x190
? usleep_range_state+0x90/0x90
cmd_exec+0x42e/0xb40 [mlx5_core]
mlx5_cmd_do+0x1e/0x40 [mlx5_core]
mlx5_cmd_exec+0x18/0x30 [mlx5_core]
mlx5_cmd_delete_fte+0xa8/0xd0 [mlx5_core]
del_hw_fte+0x60/0x120 [mlx5_core]
mlx5_del_flow_rules+0xec/0x270 [mlx5_core]
? default_send_IPI_single_phys+0x26/0x30
mlx5e_accel_ipsec_fs_del_pol+0x1a/0x60 [mlx5_core]
mlx5e_xfrm_free_policy+0x15/0x20 [mlx5_core]
xfrm_policy_destroy+0x5a/0xb0
xfrm4_dst_destroy+0x7b/0x100
dst_destroy+0x37/0x120
rcu_core+0x2d6/0x540
__do_softirq+0xcd/0x273
irq_exit_rcu+0x82/0xb0
sysvec_apic_timer_interrupt+0x72/0x90
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:default_idle+0x13/0x20
Code: c0 08 00 00 00 4d 29 c8 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 8b 05 7a 4d ee 00 85 c0 7e 07 0f 00 2d 2f 98 2e 00 fb f4 <fa> c3 66 66 2e 0f 1f 84 00 00 00 00 00 65 48 8b 04 25 40 b4 02 00
RSP: 0018:ffff888100843ee0 EFLAGS: 00000242
RAX: 0000000000000001 RBX: ffff888100812b00 RCX: 4000000000000000
RDX: 0000000000000001 RSI: 0000000000000083 RDI: 000000000002d2ec
RBP: 0000000000000007 R08: 00000021daeded59 R09: 0000000000000001
R10: 0000000000000000 R11: 000000000000000f R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
default_idle_call+0x30/0xb0
do_idle+0x1c1/0x1d0
cpu_startup_entry+0x19/0x20
start_secondary+0xfe/0x120
secondary_startup_64_no_verify+0xf3/0xfb
</TASK>
bad: scheduling from the idle thread!
Fixes: a5b8ca9471d3 ("net/mlx5e: Add XFRM policy offload logic")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The kernel IRQ system needs the irq affinity notifier to be clear
before attempting to free the irq, see WARN_ON log below.
On a normal driver unload we don't have this issue since we do the
complete cleanup of the irq resources.
To fix this, put the important resources cleanup in a helper function
and use it in both normal driver unload and shutdown flows.
[ 4497.498434] ------------[ cut here ]------------
[ 4497.498726] WARNING: CPU: 0 PID: 9 at kernel/irq/manage.c:2034 free_irq+0x295/0x340
[ 4497.499193] Modules linked in:
[ 4497.499386] CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W 6.4.0-rc4+ #10
[ 4497.499876] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
[ 4497.500518] Workqueue: events do_poweroff
[ 4497.500849] RIP: 0010:free_irq+0x295/0x340
[ 4497.501132] Code: 85 c0 0f 84 1d ff ff ff 48 89 ef ff d0 0f 1f 00 e9 10 ff ff ff 0f 0b e9 72 ff ff ff 49 8d 7f 28 ff d0 0f 1f 00 e9 df fd ff ff <0f> 0b 48 c7 80 c0 008
[ 4497.502269] RSP: 0018:ffffc90000053da0 EFLAGS: 00010282
[ 4497.502589] RAX: ffff888100949600 RBX: ffff88810330b948 RCX: 0000000000000000
[ 4497.503035] RDX: ffff888100949600 RSI: ffff888100400490 RDI: 0000000000000023
[ 4497.503472] RBP: ffff88810330c7e0 R08: ffff8881004005d0 R09: ffffffff8273a260
[ 4497.503923] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881009ae000
[ 4497.504359] R13: ffff8881009ae148 R14: 0000000000000000 R15: ffff888100949600
[ 4497.504804] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
[ 4497.505302] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4497.505671] CR2: 00007fce98806298 CR3: 000000000262e005 CR4: 0000000000370ef0
[ 4497.506104] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4497.506540] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 4497.507002] Call Trace:
[ 4497.507158] <TASK>
[ 4497.507299] ? free_irq+0x295/0x340
[ 4497.507522] ? __warn+0x7c/0x130
[ 4497.507740] ? free_irq+0x295/0x340
[ 4497.507963] ? report_bug+0x171/0x1a0
[ 4497.508197] ? handle_bug+0x3c/0x70
[ 4497.508417] ? exc_invalid_op+0x17/0x70
[ 4497.508662] ? asm_exc_invalid_op+0x1a/0x20
[ 4497.508926] ? free_irq+0x295/0x340
[ 4497.509146] mlx5_irq_pool_free_irqs+0x48/0x90
[ 4497.509421] mlx5_irq_table_free_irqs+0x38/0x50
[ 4497.509714] mlx5_core_eq_free_irqs+0x27/0x40
[ 4497.509984] shutdown+0x7b/0x100
[ 4497.510184] pci_device_shutdown+0x30/0x60
[ 4497.510440] device_shutdown+0x14d/0x240
[ 4497.510698] kernel_power_off+0x30/0x70
[ 4497.510938] process_one_work+0x1e6/0x3e0
[ 4497.511183] worker_thread+0x49/0x3b0
[ 4497.511407] ? __pfx_worker_thread+0x10/0x10
[ 4497.511679] kthread+0xe0/0x110
[ 4497.511879] ? __pfx_kthread+0x10/0x10
[ 4497.512114] ret_from_fork+0x29/0x50
[ 4497.512342] </TASK>
Fixes: 9c2d08010963 ("net/mlx5: Free irqs only on shutdown callback")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
|
|
When TUNNEL_L3_TO_L2 decap action was created, a pointer to a local
variable was passed as its HW action data, resulting in attempt to
free invalid address:
BUG: KASAN: invalid-free in mlx5dr_action_destroy+0x318/0x410 [mlx5_core]
Fixes: 4781df92f4da ("net/mlx5: DR, Move STEv0 modify header logic")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In some cases, steering might need to use SW-created action in
FW table, which results in wrong packet reformat being used:
mlx5_core 0000:81:00.1: mlx5_cmd_check:756:(pid 1154):
SET_FLOW_TABLE_ENTRY(0×936) op_mod(0×0) failed,
status bad resource(0×5), syndrome (0xf2ff71)
This patch adds support for usage of SW-created packet reformat (encap)
actions in FW tables, and adds clear error flow for attempt to use
SW-created modify header on FW tables.
Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Erez Shitrit <erezsh@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit removes special handling of CT action. But it
removes too much. Pre ct/ct_nat tables and some other resources
are not destroyed due to the cited commit.
Fix it by adding it back.
Fixes: 08fe94ec5f77 ("net/mlx5e: TC, Remove special handling of CT action")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commits add hardware miss support to tc action. But if
the rules can't be offloaded, the pointers are null and system
will panic when accessing them.
Fix it by checking null pointer.
Fixes: 08fe94ec5f77 ("net/mlx5e: TC, Remove special handling of CT action")
Fixes: 6702782845a5 ("net/mlx5e: TC, Set CT miss to the specific ct action instance")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When a PCI device has just one msix vector available, we want to share
this vector between async and completion events. Current code fails to
do that assuming it will always have at least one dedicated vector for
completion events. Fix this by detecting when the pool contains just a
single vector.
Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commit missed setting napi_id on XSK RQs, it only affected
regular RQs. Add the missing part to support socket busy polling on XSK
RQs.
Fixes: a2740f529da2 ("net/mlx5e: xsk: Set napi_id to support busy polling")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The cited commits missed passing frag_size to __xdp_rxq_info_reg, which
is required by bpf_xdp_adjust_tail to support growing the tail pointer
in fragmented packets. Pass the missing parameter when the current RQ
mode allows XDP multi buffer.
Fixes: ea5d49bdae8b ("net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ")
Fixes: 9cb9482ef10e ("net/mlx5e: Use fragments of the same size in non-linear legacy RQ with XDP")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
There are some MD5 tests which fail when the kernel is in FIPS mode,
since MD5 is not FIPS compliant. Add a check and only run those tests
if FIPS mode is not enabled.
Fixes: f0bee1ebb5594 ("fcnal-test: Add TCP MD5 tests")
Fixes: 5cad8bce26e01 ("fcnal-test: Add TCP MD5 tests for VRF")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.
Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms")
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not
FIPS compliant. When fips=1, this set of tests fails. Add a check and only
run these tests if not in FIPS mode.
Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Fixes: e506342a03c7 ("selftests/tls: add SM4 GCM/CCM to tls selftests")
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Before executing each test from a fixture, FIXTURE_SETUP is run once.
When SKIP is used in FIXTURE_SETUP, the setup function returns early
but the test still proceeds to run, unless another SKIP macro is used
within the test definition, leading to some code repetition. Therefore,
allow tests to be skipped directly from the setup function.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Magali Lemes <magali.lemes@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DCCP was marked as Orphan in the MAINTAINERS entry 2 years ago in commit
054c4610bd05 ("MAINTAINERS: dccp: move Gerrit Renker to CREDITS"). It says
we haven't heard from the maintainer for five years, so DCCP is not well
maintained for 7 years now.
Recently DCCP only receives updates for bugs, and major distros disable it
by default.
Removing DCCP would allow for better organisation of TCP fields to reduce
the number of cache lines hit in the fast path.
Let's add a deprecation notice when DCCP socket is created and schedule its
removal to 2025.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Recently syzkaller reported a 7-year-old null-ptr-deref [0] that occurs
when a UDP-Lite socket tries to allocate a buffer under memory pressure.
Someone should have stumbled on the bug much earlier if UDP-Lite had been
used in a real app. Also, we do not always need a large UDP-Lite workload
to hit the bug since UDP and UDP-Lite share the same memory accounting
limit.
Removing UDP-Lite would simplify UDP code removing a bunch of conditionals
in fast path.
Let's add a deprecation notice when UDP-Lite socket is created and schedule
its removal to 2025.
Link: https://lore.kernel.org/netdev/20230523163305.66466-1-kuniyu@amazon.com/ [0]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check for ioremap() and return the error if it fails in order to
guarantee the success of ioremap().
Fixes: 862cd659a6fb ("octeon_ep: Add driver framework and device initialization")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20230615033400.2971-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, timestamps were printed using "%lld.%u" which is incorrect
for nanosecond values lower than 100,000,000 as they're fractional
digits, therefore leading zeros are meaningful.
This patch changes the format strings to "%lld.%09u" in order to add
leading zeros to the nanosecond value.
Fixes: 568ebc5985f5 ("ptp: add the PTP_SYS_OFFSET ioctl to the testptp program")
Fixes: 4ec54f95736f ("ptp: Fix compiler warnings in the testptp utility")
Fixes: 6ab0e475f1f3 ("Documentation: fix misc. warnings")
Signed-off-by: Alex Maftei <alex.maftei@amd.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230615083404.57112-1-alex.maftei@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a possible memory leak in __stmmac_open when stmmac_init_phy fails.
It's also needed to free everything allocated by stmmac_setup_dma_desc
and not just the dma_conf struct.
Drop free_dma_desc_resources from __stmmac_open and correctly call
free_dma_desc_resources on each user of __stmmac_open on error.
Reported-by: Jose Abreu <Jose.Abreu@synopsys.com>
Fixes: ba39b344e924 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Link: https://lore.kernel.org/r/20230614091714.15912-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to nla_parse_nested_deprecated(), the tb[] is supposed to the
destination array with maxtype+1 elements. In current
tipc_nl_media_get() and __tipc_nl_media_set(), a larger array is used
which is unnecessary. This patch resize them to a proper size.
Fixes: 1e55417d8fc6 ("tipc: add media set to new netlink api")
Fixes: 46f15c6794fb ("tipc: add media get/dump to new netlink api")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Link: https://lore.kernel.org/r/20230614120604.1196377-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Split abnormal IO in terms of the corresponding operation specific
max_sectors (max_discard_sectors, max_secure_erase_sectors or
max_write_zeroes_sectors).
This fixes a significant dm-thinp discard performance regression that
was introduced with commit e2dd8aca2d76 ("dm bio prison v1: improve
concurrent IO performance"). Relative to discard: max_discard_sectors
is used instead of max_sectors; which fixes excessive discard splitting
(e.g. max_sectors=128K vs max_discard_sectors=64M).
Tested by discarding an 1 Petabyte dm-thin device:
lvcreate -V 1125899906842624B -T test/pool -n thin
time blkdiscard /dev/test/thin
Before this fix (splitting discards every 128K): ~116m
After this fix (splitting discards every 64M) : 0m33.460s
Reported-by: Zorro Lang <zlang@redhat.com>
Fixes: 06961c487a33 ("dm: split discards further if target sets max_discard_granularity")
Requires: 13f6facf3fae ("dm: allow targets to require splitting WRITE_ZEROES and SECURE_ERASE")
Fixes: e2dd8aca2d76 ("dm bio prison v1: improve concurrent IO performance")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
issue_discard() passes GFP_NOWAIT to __blkdev_issue_discard() despite
its code assuming bio_alloc() always succeeds.
Commit 3dba53a958a75 ("dm thin: use __blkdev_issue_discard for async
discard support") clearly shows where things went bad:
Before commit 3dba53a958a75, dm-thin.c's open-coded
__blkdev_issue_discard_async() properly handled using GFP_NOWAIT.
Unfortunately __blkdev_issue_discard() doesn't and it was missed
during review.
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
Must check pmd->fail_io before using pmd->data_sm since
pmd->data_sm may be destroyed by other processes.
P1(kworker) P2(message)
do_worker
process_prepared
process_prepared_discard_passdown_pt2
dm_pool_dec_data_range
pool_message
commit
dm_pool_commit_metadata
↓
// commit failed
metadata_operation_failed
abort_transaction
dm_pool_abort_metadata
__open_or_format_metadata
↓
dm_sm_disk_open
↓
// open failed
// pmd->data_sm is NULL
dm_sm_dec_blocks
↓
// try to access pmd->data_sm --> UAF
As shown above, if dm_pool_commit_metadata() and
dm_pool_abort_metadata() fail in pool_message process, kworker may
trigger UAF.
Fixes: be500ed721a6 ("dm space maps: improve performance with inc/dec on ranges of blocks")
Cc: stable@vger.kernel.org
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
As described in commit 38d11da522aa ("dm: don't lock fs when the map is
NULL in process of resume"), a deadlock may be triggered between
do_resume() and do_mount().
This commit preserves the fix from commit 38d11da522aa but moves it to
where it also serves to fix a similar deadlock between do_suspend()
and do_mount(). It does so, if the active map is NULL, by clearing
DM_SUSPEND_LOCKFS_FLAG in dm_suspend() which is called by both
do_suspend() and do_resume().
Fixes: 38d11da522aa ("dm: don't lock fs when the map is NULL in process of resume")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
In systems without MSI-X capabilities, xdp_txq_queues_mode is calculated
in efx_allocate_msix_channels, but when enabling MSI-X fails, it was not
changed to a proper default value. This was leading to the driver
thinking that it has dedicated XDP queues, when it didn't.
Fix it by setting xdp_txq_queues_mode to the correct value if the driver
fallbacks to MSI or legacy IRQ mode. The correct value is
EFX_XDP_TX_QUEUES_BORROWED because there are no XDP dedicated queues.
The issue can be easily visible if the kernel is started with pci=nomsi,
then a call trace is shown. It is not shown only with sfc's modparam
interrupt_mode=2. Call trace example:
WARNING: CPU: 2 PID: 663 at drivers/net/ethernet/sfc/efx_channels.c:828 efx_set_xdp_channels+0x124/0x260 [sfc]
[...skip...]
Call Trace:
<TASK>
efx_set_channels+0x5c/0xc0 [sfc]
efx_probe_nic+0x9b/0x15a [sfc]
efx_probe_all+0x10/0x1a2 [sfc]
efx_pci_probe_main+0x12/0x156 [sfc]
efx_pci_probe_post_io+0x18/0x103 [sfc]
efx_pci_probe.cold+0x154/0x257 [sfc]
local_pci_probe+0x42/0x80
Fixes: 6215b608a8c4 ("sfc: last resort fallback for lack of xdp tx queues")
Reported-by: Yanghang Liu <yanghliu@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Inside macsec_add_dev() we free percpu macsec->secy.tx_sc.stats and
macsec->stats on some of the memory allocation failure paths. However, the
net_device is already registered to that moment: in macsec_newlink(), just
before calling macsec_add_dev(). This means that during unregister process
its priv_destructor - macsec_free_netdev() - will be called and will free
the stats again.
Remove freeing percpu stats inside macsec_add_dev() because
macsec_free_netdev() will correctly free the already allocated ones. The
pointers to unallocated stats stay NULL, and free_percpu() treats that
correctly.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 0a28bfd4971f ("net/macsec: Add MACsec skb_metadata_dst Tx Data path support")
Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It probbaly makes no sense to support arbitrary network devices
for lapbether.
syzbot reported:
skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1
kernel BUG at net/core/skbuff.c:200 !
Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_panic net/core/skbuff.c:196 [inline]
pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
lr : skb_panic net/core/skbuff.c:196 [inline]
lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
sp : ffff8000973b7260
x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000
x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea
x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140
x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0
x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00
x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4
x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086
Call trace:
skb_panic net/core/skbuff.c:196 [inline]
skb_under_panic+0x13c/0x140 net/core/skbuff.c:210
skb_push+0xf0/0x108 net/core/skbuff.c:2409
ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383
dev_hard_header include/linux/netdevice.h:3137 [inline]
lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257
lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447
lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149
lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251
lapb_establish_data_link+0x94/0xec
lapb_device_event+0x348/0x4e0
notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93
raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461
__dev_notify_flags+0x2bc/0x544
dev_change_flags+0xd0/0x15c net/core/dev.c:8643
devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150
inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979
sock_do_ioctl+0x134/0x2dc net/socket.c:1201
sock_ioctl+0x4ec/0x858 net/socket.c:1318
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191
el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647
el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000)
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
adding three people from Alibaba as reviewers for SMC.
They are currently working on improving SMC on other architectures than
s390 and help with reviewing patches on top.
Thank you D. Wythe, Tony Lu and Wen Gu for your contributions and
collaboration and welcome on board as reviewers!
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: Jan Karcher <jaka@linux.ibm.com>
Acked-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch prevents the system from crashing when unloading the ISM module.
How to reproduce: Attach an ISM device and execute 'rmmod ism'.
Error-Log:
- Trying to free already-free IRQ 0
- WARNING: CPU: 1 PID: 966 at kernel/irq/manage.c:1890 free_irq+0x140/0x540
After calling ism_dev_exit() for each ISM device in the exit routine,
pci_unregister_driver() will execute ism_remove() for each ISM device.
Because ism_remove() also calls ism_dev_exit(),
free_irq(pci_irq_vector(pdev, 0), ism) is called twice for each ISM
device. This results in a crash with the error
'Trying to free already-free IRQ'.
In the exit routine, it is enough to call pci_unregister_driver()
because it ensures that ism_dev_exit() is called once per
ISM device.
Cc: <stable@vger.kernel.org> # 6.3+
Fixes: 89e7d2ba61b7 ("net/ism: Add new API for client registration")
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The debugfs_create_dir() returns ERR_PTR in case of an error and the
correct way of checking it is using the IS_ERR_OR_NULL inline function
rather than the simple null comparision. This patch fixes the issue.
Cc: stable@vger.kernel.org
Suggested-By: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Immad Mir <mirimmad17@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The hardware monitoring points for instruction fetching and load/store
operations need to align 4 bytes and 1/2/4/8 bytes respectively.
Reported-by: Colin King <colin.i.king@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
LoongArch PMCFG has 10bit event id rather than 8 bit, so fix it.
Cc: stable@vger.kernel.org
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The "write_fcsr()" macro uses wrong the positions for val and dest in
asm. Fix it!
Reported-by: Miao HAO <haomiao19@mails.ucas.ac.cn>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
When we split a pmd into ptes, pmd_present() and pmd_trans_huge() should
return true, otherwise it would be treated as a swap pmd.
This is the same as arm64 does in commit b65399f6111b ("arm64/mm: Change
THP helpers to comply with generic MM semantics"), we also add a new bit
named _PAGE_PRESENT_INVALID for LoongArch.
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
The DEV_MAC_MAXLEN_CFG register contains a 16-bit value - up to 65535.
Plus 2 * VLAN_HLEN (4), that is up to 65543.
The picos_per_byte variable is the largest when "speed" is lowest -
SPEED_10 = 10. In that case it is (1000000L * 8) / 10 = 800000.
Their product - 52434400000 - exceeds 32 bits, which is a problem,
because apparently, a multiplication between two 32-bit factors is
evaluated as 32-bit before being assigned to a 64-bit variable.
In fact it's a problem for any MTU value larger than 5368.
Cast one of the factors of the multiplication to u64 to force the
multiplication to take place on 64 bits.
Issue found by Coverity.
Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230613170907.2413559-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mingshuai Ren reports:
When a new chain is added by using tc, one soft lockup alarm will be
generated after delete the prio 0 filter of the chain. To reproduce
the problem, perform the following steps:
(1) tc qdisc add dev eth0 root handle 1: htb default 1
(2) tc chain add dev eth0
(3) tc filter del dev eth0 chain 0 parent 1: prio 0
(4) tc filter add dev eth0 chain 0 parent 1:
Fix the issue by accounting for additional reference to chains that are
explicitly created by RTM_NEWCHAIN message as opposed to implicitly by
RTM_NEWTFILTER message.
Fixes: 726d061286ce ("net: sched: prevent insertion of new classifiers during chain flush")
Reported-by: Mingshuai Ren <renmingshuai@huawei.com>
Closes: https://lore.kernel.org/lkml/87legswvi3.fsf@nvidia.com/T/
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Link: https://lore.kernel.org/r/20230612093426.2867183-1-vladbu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Clearing the interrupt scheme before PFR reset,
during the removal routine, could cause the hardware
errors and possibly lead to system reboot, as the PF
reset can cause the interrupt to be generated.
Place the call for PFR reset inside ice_deinit_dev(),
wait until reset and all pending transactions are done,
then call ice_clear_interrupt_scheme().
This introduces a PFR reset to multiple error paths.
Additionally, remove the call for the reset from
ice_load() - it will be a part of ice_unload() now.
Error example:
[ 75.229328] ice 0000:ca:00.1: Failed to read Tx Scheduler Tree - User Selection data from flash
[ 77.571315] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[ 77.571418] {1}[Hardware Error]: event severity: recoverable
[ 77.571459] {1}[Hardware Error]: Error 0, type: recoverable
[ 77.571500] {1}[Hardware Error]: section_type: PCIe error
[ 77.571540] {1}[Hardware Error]: port_type: 4, root port
[ 77.571580] {1}[Hardware Error]: version: 3.0
[ 77.571615] {1}[Hardware Error]: command: 0x0547, status: 0x4010
[ 77.571661] {1}[Hardware Error]: device_id: 0000:c9:02.0
[ 77.571703] {1}[Hardware Error]: slot: 25
[ 77.571736] {1}[Hardware Error]: secondary_bus: 0xca
[ 77.571773] {1}[Hardware Error]: vendor_id: 0x8086, device_id: 0x347a
[ 77.571821] {1}[Hardware Error]: class_code: 060400
[ 77.571858] {1}[Hardware Error]: bridge: secondary_status: 0x2800, control: 0x0013
[ 77.572490] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020
[ 77.572870] pcieport 0000:c9:02.0: [21] ACSViol (First)
[ 77.573222] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID
[ 77.573554] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010
[ 77.691273] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[ 77.691738] {2}[Hardware Error]: event severity: recoverable
[ 77.691971] {2}[Hardware Error]: Error 0, type: recoverable
[ 77.692192] {2}[Hardware Error]: section_type: PCIe error
[ 77.692403] {2}[Hardware Error]: port_type: 4, root port
[ 77.692616] {2}[Hardware Error]: version: 3.0
[ 77.692825] {2}[Hardware Error]: command: 0x0547, status: 0x4010
[ 77.693032] {2}[Hardware Error]: device_id: 0000:c9:02.0
[ 77.693238] {2}[Hardware Error]: slot: 25
[ 77.693440] {2}[Hardware Error]: secondary_bus: 0xca
[ 77.693641] {2}[Hardware Error]: vendor_id: 0x8086, device_id: 0x347a
[ 77.693853] {2}[Hardware Error]: class_code: 060400
[ 77.694054] {2}[Hardware Error]: bridge: secondary_status: 0x0800, control: 0x0013
[ 77.719115] pci 0000:ca:00.1: AER: can't recover (no error_detected callback)
[ 77.719140] pcieport 0000:c9:02.0: AER: device recovery failed
[ 77.719216] pcieport 0000:c9:02.0: AER: aer_status: 0x00200000, aer_mask: 0x00100020
[ 77.719390] pcieport 0000:c9:02.0: [21] ACSViol (First)
[ 77.719557] pcieport 0000:c9:02.0: AER: aer_layer=Transaction Layer, aer_agent=Receiver ID
[ 77.719723] pcieport 0000:c9:02.0: AER: aer_uncor_severity: 0x00463010
Fixes: 5b246e533d01 ("ice: split probe into smaller functions")
Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230612171421.21570-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A reference underflow is found in TLS handshake subsystem that causes a
direct use-after-free. Part of the crash log is like below:
[ 2.022114] ------------[ cut here ]------------
[ 2.022193] refcount_t: underflow; use-after-free.
[ 2.022288] WARNING: CPU: 0 PID: 60 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
[ 2.022432] Modules linked in:
[ 2.022848] RIP: 0010:refcount_warn_saturate+0xbe/0x110
[ 2.023231] RSP: 0018:ffffc900001bfe18 EFLAGS: 00000286
[ 2.023325] RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00000000ffffdfff
[ 2.023438] RDX: 0000000000000000 RSI: 00000000ffffffea RDI: 0000000000000001
[ 2.023555] RBP: ffff888004c20098 R08: ffffffff82b392c8 R09: 00000000ffffdfff
[ 2.023693] R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888004c200d8
[ 2.023813] R13: 0000000000000000 R14: ffff888004c20000 R15: ffffc90000013ca8
[ 2.023930] FS: 0000000000000000(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[ 2.024062] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.024161] CR2: ffff888003601000 CR3: 0000000002a2e000 CR4: 00000000000006f0
[ 2.024275] Call Trace:
[ 2.024322] <TASK>
[ 2.024367] ? __warn+0x7f/0x130
[ 2.024430] ? refcount_warn_saturate+0xbe/0x110
[ 2.024513] ? report_bug+0x199/0x1b0
[ 2.024585] ? handle_bug+0x3c/0x70
[ 2.024676] ? exc_invalid_op+0x18/0x70
[ 2.024750] ? asm_exc_invalid_op+0x1a/0x20
[ 2.024830] ? refcount_warn_saturate+0xbe/0x110
[ 2.024916] ? refcount_warn_saturate+0xbe/0x110
[ 2.024998] __tcp_close+0x2f4/0x3d0
[ 2.025065] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10
[ 2.025168] tcp_close+0x1f/0x70
[ 2.025231] inet_release+0x33/0x60
[ 2.025297] sock_release+0x1f/0x80
[ 2.025361] handshake_req_cancel_test2+0x100/0x2d0
[ 2.025457] kunit_try_run_case+0x4c/0xa0
[ 2.025532] kunit_generic_run_threadfn_adapter+0x15/0x20
[ 2.025644] kthread+0xe1/0x110
[ 2.025708] ? __pfx_kthread+0x10/0x10
[ 2.025780] ret_from_fork+0x2c/0x50
One can enable CONFIG_NET_HANDSHAKE_KUNIT_TEST config to reproduce above
crash.
The root cause of this bug is that the commit 1ce77c998f04
("net/handshake: Unpin sock->file if a handshake is cancelled") adds one
additional fput() function. That patch claims that the fput() is used to
enable sock->file to be freed even when user space never calls DONE.
However, it seems that the intended DONE routine will never give an
additional fput() of ths sock->file. The existing two of them are just
used to balance the reference added in sockfd_lookup().
This patch revert the mentioned commit to avoid the use-after-free. The
patched kernel could successfully pass the KUNIT test and boot to shell.
[ 0.733613] # Subtest: Handshake API tests
[ 0.734029] 1..11
[ 0.734255] KTAP version 1
[ 0.734542] # Subtest: req_alloc API fuzzing
[ 0.736104] ok 1 handshake_req_alloc NULL proto
[ 0.736114] ok 2 handshake_req_alloc CLASS_NONE
[ 0.736559] ok 3 handshake_req_alloc CLASS_MAX
[ 0.737020] ok 4 handshake_req_alloc no callbacks
[ 0.737488] ok 5 handshake_req_alloc no done callback
[ 0.737988] ok 6 handshake_req_alloc excessive privsize
[ 0.738529] ok 7 handshake_req_alloc all good
[ 0.739036] # req_alloc API fuzzing: pass:7 fail:0 skip:0 total:7
[ 0.739444] ok 1 req_alloc API fuzzing
[ 0.740065] ok 2 req_submit NULL req arg
[ 0.740436] ok 3 req_submit NULL sock arg
[ 0.740834] ok 4 req_submit NULL sock->file
[ 0.741236] ok 5 req_lookup works
[ 0.741621] ok 6 req_submit max pending
[ 0.741974] ok 7 req_submit multiple
[ 0.742382] ok 8 req_cancel before accept
[ 0.742764] ok 9 req_cancel after accept
[ 0.743151] ok 10 req_cancel after done
[ 0.743510] ok 11 req_destroy works
[ 0.743882] # Handshake API tests: pass:11 fail:0 skip:0 total:11
[ 0.744205] # Totals: pass:17 fail:0 skip:0 total:17
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Fixes: 1ce77c998f04 ("net/handshake: Unpin sock->file if a handshake is cancelled")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20230613083204.633896-1-linma@zju.edu.cn
Link: https://lore.kernel.org/r/20230614015249.987448-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A recent patch added a call to ext4_error() which is problematic since
some callers of the ext4_get_group_info() function may be holding a
spinlock, whereas ext4_error() must never be called in atomic context.
This triggered a report from Syzbot: "BUG: sleeping function called from
invalid context in ext4_update_super" (see the link below).
Therefore, drop the call to ext4_error() from ext4_get_group_info(). In
the meantime use eight characters tabs instead of nine characters ones.
Reported-by: syzbot+4acc7d910e617b360859@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/00000000000070575805fdc6cdb2@google.com/
Fixes: 5354b2af3406 ("ext4: allow ext4_get_group_info() to fail")
Suggested-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20230614100446.14337-1-fmdefrancesco@gmail.com
|
|
This reverts commit ad3f09be6cfe332be8ff46c78e6ec0f8839107aa.
The reverted commit was intended to simpfy the code to get group
descriptor block number in non-meta block group by assuming
s_gdb_count is block number used for all non-meta block group descriptors.
However s_gdb_count is block number used for all meta *and* non-meta
group descriptors. So s_gdb_group will be > actual group descriptor block
number used for all non-meta block group which should be "total non-meta
block group" / "group descriptors per block", e.g. s_first_meta_bg.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230613225025.3859522-1-shikemeng@huaweicloud.com
Fixes: ad3f09be6cfe ("ext4: remove unnecessary check in ext4_bg_num_gdb_nometa")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
As reported by Thomas Voegtle <tv@lio96.de>, sometimes a DVB card does
not initialize properly booting Linux 6.4-rc4. This is not always, maybe
in 3 out of 4 attempts.
After double-checking, the root cause seems to be related to the
UAF fix, which is causing a race issue:
[ 26.332149] tda10071 7-0005: found a 'NXP TDA10071' in cold state, will try to load a firmware
[ 26.340779] tda10071 7-0005: downloading firmware from file 'dvb-fe-tda10071.fw'
[ 989.277402] INFO: task vdr:743 blocked for more than 491 seconds.
[ 989.283504] Not tainted 6.4.0-rc5-i5 #249
[ 989.288036] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 989.295860] task:vdr state:D stack:0 pid:743 ppid:711 flags:0x00004002
[ 989.295865] Call Trace:
[ 989.295867] <TASK>
[ 989.295869] __schedule+0x2ea/0x12d0
[ 989.295877] ? asm_sysvec_apic_timer_interrupt+0x16/0x20
[ 989.295881] schedule+0x57/0xc0
[ 989.295884] schedule_preempt_disabled+0xc/0x20
[ 989.295887] __mutex_lock.isra.16+0x237/0x480
[ 989.295891] ? dvb_get_property.isra.10+0x1bc/0xa50
[ 989.295898] ? dvb_frontend_stop+0x36/0x180
[ 989.338777] dvb_frontend_stop+0x36/0x180
[ 989.338781] dvb_frontend_open+0x2f1/0x470
[ 989.338784] dvb_device_open+0x81/0xf0
[ 989.338804] ? exact_lock+0x20/0x20
[ 989.338808] chrdev_open+0x7f/0x1c0
[ 989.338811] ? generic_permission+0x1a2/0x230
[ 989.338813] ? link_path_walk.part.63+0x340/0x380
[ 989.338815] ? exact_lock+0x20/0x20
[ 989.338817] do_dentry_open+0x18e/0x450
[ 989.374030] path_openat+0xca5/0xe00
[ 989.374031] ? terminate_walk+0xec/0x100
[ 989.374034] ? path_lookupat+0x93/0x140
[ 989.374036] do_filp_open+0xc0/0x140
[ 989.374038] ? __call_rcu_common.constprop.91+0x92/0x240
[ 989.374041] ? __check_object_size+0x147/0x260
[ 989.374043] ? __check_object_size+0x147/0x260
[ 989.374045] ? alloc_fd+0xbb/0x180
[ 989.374048] ? do_sys_openat2+0x243/0x310
[ 989.374050] do_sys_openat2+0x243/0x310
[ 989.374052] do_sys_open+0x52/0x80
[ 989.374055] do_syscall_64+0x5b/0x80
[ 989.421335] ? __task_pid_nr_ns+0x92/0xa0
[ 989.421337] ? syscall_exit_to_user_mode+0x20/0x40
[ 989.421339] ? do_syscall_64+0x67/0x80
[ 989.421341] ? syscall_exit_to_user_mode+0x20/0x40
[ 989.421343] ? do_syscall_64+0x67/0x80
[ 989.421345] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 989.421348] RIP: 0033:0x7fe895d067e3
[ 989.421349] RSP: 002b:00007fff933c2ba0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101
[ 989.421351] RAX: ffffffffffffffda RBX: 00007fff933c2c10 RCX: 00007fe895d067e3
[ 989.421352] RDX: 0000000000000802 RSI: 00005594acdce160 RDI: 00000000ffffff9c
[ 989.421353] RBP: 0000000000000802 R08: 0000000000000000 R09: 0000000000000000
[ 989.421353] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000001
[ 989.421354] R13: 00007fff933c2ca0 R14: 00000000ffffffff R15: 00007fff933c2c90
[ 989.421355] </TASK>
This reverts commit 6769a0b7ee0c3b31e1b22c3fadff2bfb642de23f.
Fixes: 6769a0b7ee0c ("media: dvb-core: Fix use-after-free on race condition at dvb_frontend")
Link: https://lore.kernel.org/all/da5382ad-09d6-20ac-0d53-611594b30861@lio96.de/
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
Pablo Neira Ayuso
Terin Stock
Stefan Wahren
Andrew Lunn
Juerg Haefliger
Íñigo Huguet
Leon Romanovsky
Patrisious Haddad
Saeed Mahameed
Yevgeny Kliteynik
Chris Mi
Eli Cohen
Maxim Mikityanskiy
Magali Lemes
Kuniyuki Iwashima
Jiasheng Jiang
Alex Maftei
Christian Marangi
Lin Ma
Mike Snitzer
Li Lingfeng
Fedor Pchelkin
Eric Dumazet
Jan Karcher
Julian Ruess
Immad Mir
Qing Zhang
Huacai Chen
Qi Hu
Hongchen Zhang
Vladimir Oltean
Vlad Buslov
Jakub Buchocki
Fabio M. De Francesco
Kemeng Shi
Mauro Carvalho Chehab