| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Similarly to DCDBAS for DELL_SMBIOS_SMM, if DELL_SMBIOS_WMI is enabled,
DELL_SMBIOS becomes dependent on ACPI_WMI. Update the depends lines to
prevent a configuration where DELL_SMBIOS=y and either backend
dependency =m. Update the comment accordingly.
Cc: Mario Limonciello <mario.limonciello@dell.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
The warnings are:
drivers/auxdisplay/img-ascii-lcd.c: warning: 'err' may be used
uninitialized in this function [-Wuninitialized]
At lines 109 and 207. Reported by Geert using the build service
several times, e.g.:
https://lkml.org/lkml/2018/2/19/303
They are two false positives, since num_chars > 0 in the three present
configurations (boston, malta, sead3). Initialize to 0 in order to
silence the warning.
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Compiling with W=1 with gcc 7.2.0 gives 2 warnings:
drivers/auxdisplay/img-ascii-lcd.c:233: warning: Function parameter or
member 't' not described in 'img_ascii_lcd_scroll'
drivers/auxdisplay/img-ascii-lcd.c:233: warning: Excess function
parameter 'arg' description in 'img_ascii_lcd_scroll'
Cc: Paul Burton <paul.burton@mips.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
Compiling with W=1 with gcc 7.2.0 gives 3 warnings like:
drivers/auxdisplay/panel.c: In function ‘panel_process_inputs’:
drivers/auxdisplay/panel.c:1374:17: warning: this statement may fall
through [-Wimplicit-fallthrough=]
Cc: Willy Tarreau <w@1wt.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
|
|
This fixes an oops on unbind / module unload (on the musb omap2430
platform).
musb_remove function now calls musb_platform_exit before disabling
runtime pm.
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
While the specific UFS PHY drivers (14nm and 20nm) have a module
license, the common base module does not, leading to a Kbuild
failure:
WARNING: modpost: missing MODULE_LICENSE() in drivers/phy/qualcomm/phy-qcom-ufs.o
FATAL: modpost: GPL-incompatible module phy-qcom-ufs.ko uses GPL-only symbol 'clk_enable'
This adds a module description and license tag to fix the build.
I added both Yaniv and Vivek as authors here, as Yaniv sent the initial
submission, while Vivek did most of the work since.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
|
|
On the CP110 components which are present on the Armada 7K/8K SoC we need
to explicitly enable the clock for the registers. However it is not
needed for the AP8xx component, that's why this clock is optional.
With this patch both clock have now a name, but in order to be backward
compatible, the name of the first clock is not used. It allows to still
use this clock with a device tree using the old binding.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
As reported by Dan the parentheses is in the wrong place, and since
unlikely() call returns either 0 or 1 it's never less than zero. The
second issue is that signed integer overflows like "INT_MAX + 1" are
undefined behavior.
Since num_test_devs represents the number of devices, we want to stop
prior to hitting the max, and not rely on the wrap arround at all. So
just cap at num_test_devs + 1, prior to assigning a new device.
Link: http://lkml.kernel.org/r/20180224030046.24238-1-mcgrof@kernel.org
Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix userfaultfd_hugetlb on hosts which have more than 64 cpus.
---------------------------
running userfaultfd_hugetlb
---------------------------
invalid MiB
Usage: <MiB> <bounces>
[FAIL]
Via userfaultfd.c we can know, hugetlb_size needs to meet hugetlb_size
>= nr_cpus * hugepage_size. hugepage_size is often 2M, so when host
cpus > 64, it requires more than 128M.
[zhijianx.li@intel.com: update changelog/comments and variable name]
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180303125027.81638-1-zhijianx.li@intel.com
Link: http://lkml.kernel.org/r/20180302024356.83359-1-zhijianx.li@intel.com
Signed-off-by: Li Zhijian <zhijianx.li@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns
where possible") introduced a bug where move_freepages() triggers a
VM_BUG_ON() on uninitialized page structure due to pageblock alignment.
To fix this, simply align the skipped pfns in memmap_init_zone() the
same way as in move_freepages_block().
Seen in one of the RHEL reports:
crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1
kernel BUG at mm/page_alloc.c:1389!
invalid opcode: 0000 [#1] SMP
--
RIP: 0010:[<ffffffff8118833e>] [<ffffffff8118833e>] move_freepages+0x15e/0x160
RSP: 0018:ffff88054d727688 EFLAGS: 00010087
--
Call Trace:
[<ffffffff811883b3>] move_freepages_block+0x73/0x80
[<ffffffff81189e63>] __rmqueue+0x263/0x460
[<ffffffff8118c781>] get_page_from_freelist+0x7e1/0x9e0
[<ffffffff8118caf6>] __alloc_pages_nodemask+0x176/0x420
--
RIP [<ffffffff8118833e>] move_freepages+0x15e/0x160
RSP <ffff88054d727688>
crash> page_init_bug -v | grep RAM
<struct resource 0xffff88067fffd2f8> 1000 - 9bfff System RAM (620.00 KiB)
<struct resource 0xffff88067fffd3a0> 100000 - 430bffff System RAM ( 1.05 GiB = 1071.75 MiB = 1097472.00 KiB)
<struct resource 0xffff88067fffd410> 4b0c8000 - 4bf9cfff System RAM ( 14.83 MiB = 15188.00 KiB)
<struct resource 0xffff88067fffd480> 4bfac000 - 646b1fff System RAM (391.02 MiB = 400408.00 KiB)
<struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB)
<struct resource 0xffff88067fffd640> 100000000 - 67fffffff System RAM ( 22.00 GiB)
crash> page_init_bug | head -6
<struct resource 0xffff88067fffd560> 7b788000 - 7b7fffff System RAM (480.00 KiB)
<struct page 0xffffea0001ede200> 1fffff00000000 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575
<struct page 0xffffea0001ede200> 505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0>
<struct page 0xffffea0001ed8000> 0 0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA 1 4095
<struct page 0xffffea0001edffc0> 1fffff00000400 0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32 4096 1048575
BUG, zones differ!
Note that this range follows two not populated sections
68000000-77ffffff in this zone. 7b788000-7b7fffff is the first one
after a gap. This makes memmap_init_zone() skip all the pfns up to the
beginning of this range. But this range is not pageblock (2M) aligned.
In fact no range has to be.
crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
ffffea0001e00000 78000000 0 0 0 0
ffffea0001ed7fc0 7b5ff000 0 0 0 0
ffffea0001ed8000 7b600000 0 0 0 0 <<<<
ffffea0001ede1c0 7b787000 0 0 0 0
ffffea0001ede200 7b788000 0 0 1 1fffff00000000
Top part of page flags should contain nodeid and zonenr, which is not
the case for page ffffea0001ed8000 here (<<<<).
crash> log | grep -o fffea0001ed[^\ ]* | sort -u
fffea0001ed8000
fffea0001eded20
fffea0001edffc0
crash> bt -r | grep -o fffea0001ed[^\ ]* | sort -u
fffea0001ed8000
fffea0001eded00
fffea0001eded20
fffea0001edffc0
Initialization of the whole beginning of the section is skipped up to
the start of the range due to the commit b92df1de5d28. Now any code
calling move_freepages_block() (like reusing the page from a freelist as
in this example) with a page from the beginning of the range will get
the page rounded down to start_page ffffea0001ed8000 and passed to
move_freepages() which crashes on assertion getting wrong zonenr.
> VM_BUG_ON(page_zone(start_page) != page_zone(end_page));
Note, page_zone() derives the zone from page flags here.
From similar machine before commit b92df1de5d28:
crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
fffff73941e00000 78000000 0 0 1 1fffff00000000
fffff73941ed7fc0 7b5ff000 0 0 1 1fffff00000000
fffff73941ed8000 7b600000 0 0 1 1fffff00000000
fffff73941edff80 7b7fe000 0 0 1 1fffff00000000
fffff73941edffc0 7b7ff000 ffff8e67e04d3ae0 ad84 1 1fffff00020068 uptodate,lru,active,mappedtodisk
All the pages since the beginning of the section are initialized.
move_freepages()' not gonna blow up.
The same machine with this fix applied:
crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b7fe000 7b7ff000
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
ffffea0001e00000 78000000 0 0 0 0
ffffea0001e00000 7b5ff000 0 0 0 0
ffffea0001ed8000 7b600000 0 0 1 1fffff00000000
ffffea0001edff80 7b7fe000 0 0 1 1fffff00000000
ffffea0001edffc0 7b7ff000 ffff88017fb13720 8 2 1fffff00020068 uptodate,lru,active,mappedtodisk
At least the bare minimum of pages is initialized preventing the crash
as well.
Customers started to report this as soon as 7.4 (where b92df1de5d28 was
merged in RHEL) was released. I remember reports from
September/October-ish times. It's not easily reproduced and happens on
a handful of machines only. I guess that's why. But that does not make
it less serious, I think.
Though there actually is a report here:
https://bugzilla.kernel.org/show_bug.cgi?id=196443
And there are reports for Fedora from July:
https://bugzilla.redhat.com/show_bug.cgi?id=1473242
and CentOS:
https://bugs.centos.org/view.php?id=13964
and we internally track several dozens reports for RHEL bug
https://bugzilla.redhat.com/show_bug.cgi?id=1525121
Link: http://lkml.kernel.org/r/0485727b2e82da7efbce5f6ba42524b429d0391a.1520011945.git.neelx@redhat.com
Fixes: b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible")
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is just a cleanup. It aids handling the special end case in the
next commit.
[akpm@linux-foundation.org: make it work against current -linus, not against -mm]
[akpm@linux-foundation.org: make it work against current -linus, not against -mm some more]
Link: http://lkml.kernel.org/r/1ca478d4269125a99bcfb1ca04d7b88ac1aee924.1520011944.git.neelx@redhat.com
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
KVM is hanging during postcopy live migration with userfaultfd because
get_user_pages_unlocked is not capable to handle FOLL_NOWAIT.
Earlier FOLL_NOWAIT was only ever passed to get_user_pages.
Specifically faultin_page (the callee of get_user_pages_unlocked caller)
doesn't know that if FAULT_FLAG_RETRY_NOWAIT was set in the page fault
flags, when VM_FAULT_RETRY is returned, the mmap_sem wasn't actually
released (even if nonblocking is not NULL). So it sets *nonblocking to
zero and the caller won't release the mmap_sem thinking it was already
released, but it wasn't because of FOLL_NOWAIT.
Link: http://lkml.kernel.org/r/20180302174343.5421-2-aarcange@redhat.com
Fixes: ce53053ce378c ("kvm: switch get_user_page_nowait() to get_user_pages_unlocked()")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Tested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b8347c219649 ("x86/debug: Handle warnings before the notifier
chain, to fix KGDB crash") changed the ordering of fixups, and did not
take into account the case of x86 processing non-WARN() and non-BUG()
exceptions. This would lead to output of a false BUG line with no other
information.
In the case of a refcount exception, it would be immediately followed by
the refcount WARN(), producing very strange double-"cut here":
lkdtm: attempting bad refcount_inc() overflow
------------[ cut here ]------------
Kernel BUG at 0000000065f29de5 [verbose debug info unavailable]
------------[ cut here ]------------
refcount_t overflow at lkdtm_REFCOUNT_INC_OVERFLOW+0x6b/0x90 in cat[3065], uid/euid: 0/0
WARNING: CPU: 0 PID: 3065 at kernel/panic.c:657 refcount_error_report+0x9a/0xa4
...
In the prior ordering, exceptions were searched first:
do_trap_no_signal(struct task_struct *tsk, int trapnr, char *str,
...
if (fixup_exception(regs, trapnr))
return 0;
- if (fixup_bug(regs, trapnr))
- return 0;
-
As a result, fixup_bugs()'s is_valid_bugaddr() didn't take into account
needing to search the exception list first, since that had already
happened.
So, instead of searching the exception list twice (once in
is_valid_bugaddr() and then again in fixup_exception()), just add a
simple sanity check to report_bug() that will immediately bail out if a
BUG() (or WARN()) entry is not found.
Link: http://lkml.kernel.org/r/20180301225934.GA34350@beast
Fixes: b8347c219649 ("x86/debug: Handle warnings before the notifier chain, to fix KGDB crash")
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The BUG and stack protector reports were still using a raw %p. This
changes it to %pB for more meaningful output.
Link: http://lkml.kernel.org/r/20180301225704.GA34198@beast
Fixes: ad67b74d2469 ("printk: hash addresses printed with %p")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Richard Weinberger <richard.weinberger@gmail.com>,
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Dan Rue has noticed that libhugetlbfs test suite fails counter test:
# mount_point="/mnt/hugetlb/"
# echo 200 > /proc/sys/vm/nr_hugepages
# mkdir -p "${mount_point}"
# mount -t hugetlbfs hugetlbfs "${mount_point}"
# export LD_LIBRARY_PATH=/root/libhugetlbfs/libhugetlbfs-2.20/obj64
# /root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters
Starting testcase "/root/libhugetlbfs/libhugetlbfs-2.20/tests/obj64/counters", pid 3319
Base pool size: 0
Clean...
FAIL Line 326: Bad HugePages_Total: expected 0, actual 1
The bug was bisected to 0c397daea1d4 ("mm, hugetlb: further simplify
hugetlb allocation API").
The reason is that alloc_surplus_huge_page() misaccounts per node
surplus pages. We should increase surplus_huge_pages_node rather than
nr_huge_pages_node which is already handled by alloc_fresh_huge_page.
Link: http://lkml.kernel.org/r/20180221191439.GM2231@dhcp22.suse.cz
Fixes: 0c397daea1d4 ("mm, hugetlb: further simplify hugetlb allocation API")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Dan Rue <dan.rue@linaro.org>
Tested-by: Dan Rue <dan.rue@linaro.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The user can provide very large cqe_size which will cause to integer
overflow as it can be seen in the following UBSAN warning:
=======================================================================
UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/cq.c:1192:53
signed integer overflow:
64870 * 65536 cannot be represented in type 'int'
CPU: 0 PID: 267 Comm: syzkaller605279 Not tainted 4.15.0+ #90 Hardware
name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
Call Trace:
dump_stack+0xde/0x164
? dma_virt_map_sg+0x22c/0x22c
ubsan_epilogue+0xe/0x81
handle_overflow+0x1f3/0x251
? __ubsan_handle_negate_overflow+0x19b/0x19b
? lock_acquire+0x440/0x440
mlx5_ib_resize_cq+0x17e7/0x1e40
? cyc2ns_read_end+0x10/0x10
? native_read_msr_safe+0x6c/0x9b
? cyc2ns_read_end+0x10/0x10
? mlx5_ib_modify_cq+0x220/0x220
? sched_clock_cpu+0x18/0x200
? lookup_get_idr_uobject+0x200/0x200
? rdma_lookup_get_uobject+0x145/0x2f0
ib_uverbs_resize_cq+0x207/0x3e0
? ib_uverbs_ex_create_cq+0x250/0x250
ib_uverbs_write+0x7f9/0xef0
? cyc2ns_read_end+0x10/0x10
? print_irqtrace_events+0x280/0x280
? ib_uverbs_ex_create_cq+0x250/0x250
? uverbs_devnode+0x110/0x110
? sched_clock_cpu+0x18/0x200
? do_raw_spin_trylock+0x100/0x100
? __lru_cache_add+0x16e/0x290
__vfs_write+0x10d/0x700
? uverbs_devnode+0x110/0x110
? kernel_read+0x170/0x170
? sched_clock_cpu+0x18/0x200
? security_file_permission+0x93/0x260
vfs_write+0x1b0/0x550
SyS_write+0xc7/0x1a0
? SyS_read+0x1a0/0x1a0
? trace_hardirqs_on_thunk+0x1a/0x1c
entry_SYSCALL_64_fastpath+0x1e/0x8b
RIP: 0033:0x433549
RSP: 002b:00007ffe63bd1ea8 EFLAGS: 00000217
=======================================================================
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: <stable@vger.kernel.org> # 3.13
Fixes: bde51583f49b ("IB/mlx5: Add support for resize CQ")
Reported-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The original commit of this patch has a munged log message that is
missing several of the tags the original author intended to be on the
patch. This was due to patchworks misinterpreting a cut-n-paste
separator line as an end of message line and munging the mbox that was
used to import the patch:
https://patchwork.kernel.org/patch/10264089/
The original patch will be reapplied with a fixed commit message so the
proper tags are applied.
This reverts commit aa0de36a40f446f5a21a7c1e677b98206e242edb.
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Do not log an error if tcpm_register_port() fails with -EPROBE_DEFER.
Fixes: cf140a356971 ("typec: fusb302: Use dev_err during probe")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Scatter-gather needs to be disabled when using dma_declare_coherent_memory
and HCD_LOCAL_MEM. Andrea Righi made the equivalent fix for EHCI drivers
in commit 4307a28eb01284 "USB: EHCI: fix NULL pointer dererence in HCDs
that use HCD_LOCAL_MEM".
The following NULL pointer WARN_ON_ONCE triggered with OHCI drivers:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 49 at drivers/usb/core/hcd.c:1379 hcd_alloc_coherent+0x4c/0xc8
Modules linked in:
CPU: 0 PID: 49 Comm: usb-storage Not tainted 4.15.0+ #1014
Stack : 00000000 00000000 805a78d2 0000003a 81f5c2cc 8053d367 804d77fc 00000031
805a3a08 00000563 81ee9400 805a0000 00000000 10058c00 81f61b10 805c0000
00000000 00000000 805a0000 00d9038e 00000004 803ee818 00000006 312e3420
805c0000 00000000 00000073 81f61958 00000000 00000000 802eb380 804fd538
00000009 00000563 81ee9400 805a0000 00000002 80056148 00000000 805a0000
...
Call Trace:
[<578af360>] show_stack+0x74/0x104
[<2f3702c6>] __warn+0x118/0x120
[<ae93fc9e>] warn_slowpath_null+0x44/0x58
[<a891a517>] hcd_alloc_coherent+0x4c/0xc8
[<3578fa36>] usb_hcd_map_urb_for_dma+0x4d8/0x534
[<110bc94c>] usb_hcd_submit_urb+0x82c/0x834
[<02eb5baf>] usb_sg_wait+0x14c/0x1a0
[<ccd09e85>] usb_stor_bulk_transfer_sglist.part.1+0xac/0x124
[<87a5c34c>] usb_stor_bulk_srb+0x40/0x60
[<ff1792ac>] usb_stor_Bulk_transport+0x160/0x37c
[<b9e2709c>] usb_stor_invoke_transport+0x3c/0x500
[<004754f4>] usb_stor_control_thread+0x258/0x28c
[<22edf42e>] kthread+0x134/0x13c
[<a419ffd0>] ret_from_kernel_thread+0x14/0x1c
---[ end trace bcdb825805eefdcc ]---
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the driver attempts to spin lock on udc->lock before a NULL
pointer check is performed on udc, hence there is a potential null
pointer dereference on udc->lock. Fix this by moving the null check
on udc before the lock occurs.
Fixes: ea6873a45a22 ("usbip: vudc: Add SysFS infrastructure for VUDC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A recent update to the ARM SMCCC ARCH_WORKAROUND_1 specification
allows firmware to return a non zero, positive value to describe
that although the mitigation is implemented at the higher exception
level, the CPU on which the call is made is not affected.
Let's relax the check on the return value from ARCH_WORKAROUND_1
so that we only error out if the returned value is negative.
Fixes: b092201e0020 ("arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Sphinx 1.7 removed sphinx.util.compat.Directive so people
who have upgraded cannot build the documentation. Switch to
docutils.parsers.rst.Directive which has been available since
docutils 0.5 released in 2009.
Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1083694
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
When the DELL_SMBIOS_SMM backend is enabled, the DELL_SMBIOS symbol
depends on DELL_DCDBAS, and we must avoid the situation where
DELL_SMBIOS=y and DCDBAS=m.
Adding the conditional dependency to DELL_SMBIOS such as:
depends !DELL_SMBIOS_SMM || (DCDBAS || DCDBAS=n)
results in the Kconfig tooling complaining about a circular dependency,
although it appears to work in practice.
Avoid the errors by simplifying the dependency and forcing DELL_SMBIOS
to be <= DCDBAS if DCDBAS is enabled (thanks to Greg KH for the
suggestion).
Cc: Mario.Limonciello@dell.com
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Avoid accidental configurations by setting default y for DELL_SMBIOS
backends. Avoid this impacting the default build size, by making them
dependent on DELL_SMBIOS, so they only appear when DELL_SMBIOS is
manually selected, or by DELL_LAPTOP or DELL_WMI.
While DELL_SMBIOS does have a prompt, it does not have any dependencies.
Keeping DELL_SMBIOS visible, despite being "select"ed by DELL_LAPTOP and
DELL_WMI, is a deliberate choice to provide context for the WMI and SMM
backends, which would otherwise appear to float without context within
the menu.
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
Some race conditions were raised due to dell-smbios and its backends
not being ready by the time that a consumer would call one of the
exported methods.
To avoid this problem, guarantee that all initialization has been
done by linking them all together and running init for them all.
As part of this change the Kconfig needs to be adjusted so that
CONFIG_DELL_SMBIOS_SMM and CONFIG_DELL_SMBIOS_WMI are boolean
rather than modules.
CONFIG_DELL_SMBIOS is a visually selectable option again and both
CONFIG_DELL_SMBIOS_WMI and CONFIG_DELL_SMBIOS_SMM are optional.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: Update prompt and help text for DELL_SMBIOS_* backends]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
This is being done to faciliate a later change to link all the dell-smbios
drivers together.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
WARNING: function definition argument 'struct calling_interface_buffer *'
should also have an identifier name
+ int (*call_fn)(struct calling_interface_buffer *);
WARNING: Block comments use * on subsequent lines
+ /* 4 bytes of table header, plus 7 bytes of Dell header,
plus at least
+ 6 bytes of entry */
WARNING: Block comments use a trailing */ on a separate line
+ 6 bytes of entry */
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
|
|
When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
xHC stops working:
[ 549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout
[ 549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110
[ 549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)
Delay before running xHC command CMD_RUN can workaround the issue.
Use a new quirk to make the delay only targets to the affected xHC.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch reverts the commit 835e4241e714 ("usb: host: xhci-plat:
enable clk in resume timing") because this driver also has runtime PM
and the commit 560869100b99 ("clk: renesas: cpg-mssr: Restore module
clocks during resume") will restore the clock on R-Car H3 environment.
If the xhci_plat_suspend() disables the clk, the system cannot enable
the clk in resume like the following behavior:
< In resume >
- genpd_resume_noirq() runs and enable the clk (enable_count = 1)
- cpg_mssr_resume_noirq() restores the clk register.
-- Since the clk was disabled in suspend, cpg_mssr_resume_noirq()
will disable the clk and keep the enable_count.
- Even if xhci_plat_resume() calls clk_prepare_enable(), since
the enable_count is 1, the clk will be not enabled.
After this patch is applied, the cpg-mssr driver will save the clk
as enable, so the clk will be enabled in resume.
Fixes: 835e4241e714 ("usb: host: xhci-plat: enable clk in resume timing")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change fixes buffer overflows and silent data corruption with the
usbmon device driver text file read operations.
Signed-off-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The following commit:
commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
replaced __do_lo_send_write(), which used ITER_KVEC iterators, with
lo_write_bvec() which uses ITER_BVEC iterators. In this change, though,
the WRITE flag was lost:
- iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len);
+ iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len);
This flag is necessary for the DAX case because we make decisions based on
whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and
in dax_iomap_rw().
We end up going through this path in configurations where we combine a PMEM
device with 4k sectors, a loopback device and DAX. The consequence of this
missed flag is that what we intend as a write actually turns into a read in
the DAX code, so no data is ever written.
The very simplest test case is to create a loopback device and try and
write a small string to it, then hexdump a few bytes of the device to see
if the write took. Without this patch you read back all zeros, with this
you read back the string you wrote.
For XFS this causes us to fail or panic during the following xfstests:
xfs/074 xfs/078 xfs/216 xfs/217 xfs/250
For ext4 we have a similar issue where writes never happen, but we don't
currently have any xfstests that use loopback and show this issue.
Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This
causes the xfstests to all pass.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Fixes: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ATMEL_ST config selects MFD_SYSCON, but does not depend on HAS_IOMEM.
Compile testing on architecture without HAS_IOMEM causes "unmet direct
dependencies" in Kconfig phase. Detected by "make ARCH=score allyesconfig".
Add the proper dependency to the ATMEL_ST config.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/1520335233-11277-1-git-send-email-yamada.masahiro@socionext.com
|
|
When running rcutorture with TREE03 config, CONFIG_PROVE_LOCKING=y, and
kernel cmdline argument "rcutorture.gp_exp=1", lockdep reports a
HARDIRQ-safe->HARDIRQ-unsafe deadlock:
================================
WARNING: inconsistent lock state
4.16.0-rc4+ #1 Not tainted
--------------------------------
inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
takes:
__schedule+0xbe/0xaf0
{IN-HARDIRQ-W} state was registered at:
_raw_spin_lock+0x2a/0x40
scheduler_tick+0x47/0xf0
...
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&rq->lock);
<Interrupt>
lock(&rq->lock);
*** DEADLOCK ***
1 lock held by rcu_torture_rea/724:
rcu_torture_read_lock+0x0/0x70
stack backtrace:
CPU: 2 PID: 724 Comm: rcu_torture_rea Not tainted 4.16.0-rc4+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014
Call Trace:
lock_acquire+0x90/0x200
? __schedule+0xbe/0xaf0
_raw_spin_lock+0x2a/0x40
? __schedule+0xbe/0xaf0
__schedule+0xbe/0xaf0
preempt_schedule_irq+0x2f/0x60
retint_kernel+0x1b/0x2d
RIP: 0010:rcu_read_unlock_special+0x0/0x680
? rcu_torture_read_unlock+0x60/0x60
__rcu_read_unlock+0x64/0x70
rcu_torture_read_unlock+0x17/0x60
rcu_torture_reader+0x275/0x450
? rcutorture_booster_init+0x110/0x110
? rcu_torture_stall+0x230/0x230
? kthread+0x10e/0x130
kthread+0x10e/0x130
? kthread_create_worker_on_cpu+0x70/0x70
? call_usermodehelper_exec_async+0x11a/0x150
ret_from_fork+0x3a/0x50
This happens with the following even sequence:
preempt_schedule_irq();
local_irq_enable();
__schedule():
local_irq_disable(); // irq off
...
rcu_note_context_switch():
rcu_note_preempt_context_switch():
rcu_read_unlock_special():
local_irq_save(flags);
...
raw_spin_unlock_irqrestore(...,flags); // irq remains off
rt_mutex_futex_unlock():
raw_spin_lock_irq();
...
raw_spin_unlock_irq(); // accidentally set irq on
<return to __schedule()>
rq_lock():
raw_spin_lock(); // acquiring rq->lock with irq on
which means rq->lock becomes a HARDIRQ-unsafe lock, which can cause
deadlocks in scheduler code.
This problem was introduced by commit 02a7c234e540 ("rcu: Suppress
lockdep false-positive ->boost_mtx complaints"). That brought the user
of rt_mutex_futex_unlock() with irq off.
To fix this, replace the *lock_irq() in rt_mutex_futex_unlock() with
*lock_irq{save,restore}() to make it safe to call rt_mutex_futex_unlock()
with irq off.
Fixes: 02a7c234e540 ("rcu: Suppress lockdep false-positive ->boost_mtx complaints")
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: "Paul E . McKenney" <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20180309065630.8283-1-boqun.feng@gmail.com
|
|
Disable the kprobe probing of the entry trampoline:
.entry_trampoline is a code area that is used to ensure page table
isolation between userspace and kernelspace.
At the beginning of the execution of the trampoline, we load the
kernel's CR3 register. This has the effect of enabling the translation
of the kernel virtual addresses to physical addresses. Before this
happens most kernel addresses can not be translated because the running
process' CR3 is still used.
If a kprobe is placed on the trampoline code before that change of the
CR3 register happens the kernel crashes because int3 handling pages are
not accessible.
To fix this, add the .entry_trampoline section to the kprobe blacklist
to prohibit the probing of code before all the kernel pages are
accessible.
Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: mathieu.desnoyers@efficios.com
Cc: mhiramat@kernel.org
Link: http://lkml.kernel.org/r/1520565492-4637-2-git-send-email-francis.deslauriers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In ctx_resched(), EVENT_FLEXIBLE should be sched_out when EVENT_PINNED is
added. However, ctx_resched() calculates ctx_event_type before checking
this condition. As a result, pinned events will NOT get higher priority
than flexible events.
The following shows this issue on an Intel CPU (where ref-cycles can
only use one hardware counter).
1. First start:
perf stat -C 0 -e ref-cycles -I 1000
2. Then, in the second console, run:
perf stat -C 0 -e ref-cycles:D -I 1000
The second perf uses pinned events, which is expected to have higher
priority. However, because it failed in ctx_resched(). It is never
run.
This patch fixes this by calculating ctx_event_type after re-evaluating
event_type.
Reported-by: Ephraim Park <ephiepark@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <jolsa@redhat.com>
Cc: <kernel-team@fb.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 487f05e18aa4 ("perf/core: Optimize event rescheduling on active contexts")
Link: http://lkml.kernel.org/r/20180306055504.3283731-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch adds support for r8a77965 (R-Car M3-N).
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This USB-SATA controller seems to be similar with JMicron bridge
152d:2566 already on the list. Adding it here fixes "Invalid
field in cdb" errors.
Signed-off-by: Teijo Kinnunen <teijo.kinnunen@code-q.fi>
Cc: stable@vger.kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We do want to respect the FLUSH_SYNC argument to nfs_commit_inode() to
ensure that all outstanding COMMIT requests to the inode in question are
complete. Currently we may exit early from both nfs_commit_inode() and
nfs_write_inode() even if there are COMMIT requests in flight, or unstable
writes on the commit list.
In order to get the right semantics w.r.t. sync_inode(), we don't need
to have nfs_commit_inode() reset the inode dirty flags when called from
nfs_wb_page() and/or nfs_wb_all(). We just need to ensure that
nfs_write_inode() leaves them in the right state if there are outstanding
commits, or stable pages.
Reported-by: Scott Mayhew <smayhew@redhat.com>
Fixes: dc4fd9ab01ab ("nfs: don't wait on commit in nfs_commit_inode()...")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Ensure that we hold a reference to the layout header when processing
the pNFS return-on-close so that the refcount value does not inadvertently
go to zero.
Reported-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.10+
Tested-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
|
|
The start offset needs to be of type loff_t.
Fixed: 5fadeb47dcc5c ("nfs: count DIO good bytes correctly with mirroring")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
|
|
Corrected four outstanding issues in the transport around sqsize.
1: Create Connection LS is sending the 1's-based sqsize, should be
sending the 0's-based value.
2: allocation of hw queue is using the 0's-base size. It should be
using the 1's-based value.
3: normalization of ctrl.sqsize by MQES is using MQES+1 (1's-based
value). It should be MQES (0's-based value).
4: Missing clause to ensure queue_count not larger than ctrl->sqsize.
Corrected by:
Clean up routines that pass queue size around. The queue size value is
the actual count (1's-based) value and determined from ctrl->sqsize + 1.
Routines that send 0's-based value adapt from queue size.
Sset ctrl->sqsize properly for MQES.
Added clause to nsure queue_count not larger than ctrl->sqsize + 1.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
|
|
The xHCI DbC implementation might enter a deadlock situation because
there is no sufficient protection against the shared data between
process and softirq contexts. This can lead to the following lockdep
warnings. This patch changes to use spin_{,un}lock_irq{save,restore}
to avoid potential deadlock.
[ 528.248084] ================================
[ 528.252914] WARNING: inconsistent lock state
[ 528.257756] 4.15.0-rc1+ #1630 Not tainted
[ 528.262305] --------------------------------
[ 528.267145] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[ 528.273953] ksoftirqd/1/17 [HC0[0]:SC1[1]:HE0:SE0] takes:
[ 528.280075] (&(&port->port_lock)->rlock){+.?.}, at: [<ffffffff815396a8>] dbc_rx_push+0x38/0x1c0
[ 528.290043] {SOFTIRQ-ON-W} state was registered at:
[ 528.295570] _raw_spin_lock+0x2f/0x40
[ 528.299818] dbc_write_complete+0x27/0xa0
[ 528.304458] xhci_dbc_giveback+0xd1/0x200
[ 528.309098] xhci_dbc_flush_endpoint_requests+0x50/0x70
[ 528.315116] xhci_dbc_handle_events+0x696/0x7b0
[ 528.320349] process_one_work+0x1ee/0x6e0
[ 528.324988] worker_thread+0x4a/0x430
[ 528.329236] kthread+0x13e/0x170
[ 528.332992] ret_from_fork+0x24/0x30
[ 528.337141] irq event stamp: 2861
[ 528.340897] hardirqs last enabled at (2860): [<ffffffff810674ea>] tasklet_action+0x6a/0x250
[ 528.350460] hardirqs last disabled at (2861): [<ffffffff817dc1ef>] _raw_spin_lock_irq+0xf/0x40
[ 528.360219] softirqs last enabled at (2852): [<ffffffff817e0e8c>] __do_softirq+0x3dc/0x4f9
[ 528.369683] softirqs last disabled at (2857): [<ffffffff8106805b>] run_ksoftirqd+0x1b/0x60
[ 528.379048]
[ 528.379048] other info that might help us debug this:
[ 528.386443] Possible unsafe locking scenario:
[ 528.386443]
[ 528.393150] CPU0
[ 528.395917] ----
[ 528.398687] lock(&(&port->port_lock)->rlock);
[ 528.403821] <Interrupt>
[ 528.406786] lock(&(&port->port_lock)->rlock);
[ 528.412116]
[ 528.412116] *** DEADLOCK ***
[ 528.412116]
[ 528.418825] no locks held by ksoftirqd/1/17.
[ 528.423662]
[ 528.423662] stack backtrace:
[ 528.428598] CPU: 1 PID: 17 Comm: ksoftirqd/1 Not tainted 4.15.0-rc1+ #1630
[ 528.436387] Call Trace:
[ 528.439158] dump_stack+0x5e/0x8e
[ 528.442914] print_usage_bug+0x1fc/0x220
[ 528.447357] mark_lock+0x4db/0x5a0
[ 528.451210] __lock_acquire+0x726/0x1130
[ 528.455655] ? __lock_acquire+0x557/0x1130
[ 528.460296] lock_acquire+0xa2/0x200
[ 528.464347] ? dbc_rx_push+0x38/0x1c0
[ 528.468496] _raw_spin_lock_irq+0x35/0x40
[ 528.473038] ? dbc_rx_push+0x38/0x1c0
[ 528.477186] dbc_rx_push+0x38/0x1c0
[ 528.481139] tasklet_action+0x1d2/0x250
[ 528.485483] __do_softirq+0x1dc/0x4f9
[ 528.489630] run_ksoftirqd+0x1b/0x60
[ 528.493682] smpboot_thread_fn+0x179/0x270
[ 528.498324] kthread+0x13e/0x170
[ 528.501981] ? sort_range+0x20/0x20
[ 528.505933] ? kthread_delayed_work_timer_fn+0x80/0x80
[ 528.511755] ret_from_fork+0x24/0x30
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix incorrent values showed for max Primary stream and
Linear stream array (LSA) values in the endpoint context
decoder.
Fixes: 19a7d0d65c4a ("usb: host: xhci: add Slot and EP Context tracers")
Cc: <stable@vger.kernel.org> # v4.12+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP ProBook 640 G2
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch adds missing initialisation for HP 2013 UltraSlim Dock
Line-In/Out PINs and activates keyboard mute/micmute leds
for HP EliteBook 820 G3
Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This removes a dependency on the order options are passed when creating
a fabrics controller. With the old code, if "nr_io_queues" appears before
an "nqn" option specifying the discovery controller, then nr_io_queues
is overridden with zero. If "nr_io_queues" appears after specifying the
discovery controller, then the nr_io_queues option is used to set the
number of queues, and the driver attempts to establish IO connections
to the discovery controller (which doesn't work).
It seems better to ignore (and warn about) the "nr_io_queues" option
if userspace has already asked to connect to the discovery controller.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <keith.busch@intel.com>
|
|
cmd_dt_S_dtb constructs the assembly source to incorporate a devicetree
FDT (that is, the .dtb file) as binary data in the kernel image. This
assembly source contains labels before and after the binary data. The
label names incorporate the file name of the corresponding .dtb file.
Hyphens are not legal characters in labels, so .dtb files built into the
kernel with hyphens in the file name result in errors like the
following:
bcm3368-netgear-cvg834g.dtb.S: Assembler messages:
bcm3368-netgear-cvg834g.dtb.S:5: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:5: Error: junk at end of line, first unrecognized character is `-'
bcm3368-netgear-cvg834g.dtb.S:6: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_begin:'
bcm3368-netgear-cvg834g.dtb.S:8: Error: unrecognized opcode `__dtb_bcm3368-netgear-cvg834g_end:'
bcm3368-netgear-cvg834g.dtb.S:9: Error: : no such section
bcm3368-netgear-cvg834g.dtb.S:9: Error: junk at end of line, first unrecognized character is `-'
Fix this by updating cmd_dt_S_dtb to transform all hyphens from the file
name to underscores when constructing the labels.
As of v4.16-rc2, 1139 .dts files across ARM64, ARM, MIPS and PowerPC
contain hyphens in their names, but the issue only currently manifests
on Broadcom MIPS platforms, as that is the only place where such files
are built into the kernel. For example when CONFIG_DT_NETGEAR_CVG834G=y,
or on BMIPS kernels when the dtbs target is used (in the latter case it
admittedly shouldn't really build all the dtb.o files, but thats a
separate issue).
Fixes: 695835511f96 ("MIPS: BMIPS: rename bcm96358nb4ser to bcm6358-neufbox4-sercom")
Signed-off-by: James Hogan <jhogan@kernel.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Kevin Cernekee <cernekee@gmail.com>
Cc: <stable@vger.kernel.org> # 4.9+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The bloat-o-meter script has two typos in the help, fix both.
Fixes: 192efb7a1f9b ("bloat-o-meter: provide 3 different arguments for data, function and All")
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
The check_interval file in
/sys/devices/system/machinecheck/machinecheck<cpu number>
directory is a global timer value for MCE polling. If it is changed by one
CPU, mce_restart() broadcasts the event to other CPUs to delete and restart
the MCE polling timer and __mcheck_cpu_init_timer() reinitializes the
mce_timer variable.
If more than one CPU writes a specific value to the check_interval file
concurrently, mce_timer is not protected from such concurrent accesses and
all kinds of explosions happen. Since only root can write to those sysfs
variables, the issue is not a big deal security-wise.
However, concurrent writes to these configuration variables is void of
reason so the proper thing to do is to serialize the access with a mutex.
Boris:
- Make store_int_with_restart() use device_store_ulong() to filter out
negative intervals
- Limit min interval to 1 second
- Correct locking
- Massage commit message
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20180302202706.9434-1-kkamagui@gmail.com
|
Darren Hart
Miguel Ojeda
Merlijn Wajer
Arnd Bergmann
Linus Torvalds
Gregory CLEMENT
Luis R. Rodriguez
Li Zhijian
Daniel Vacek
Andrea Arcangeli
Kees Cook
Michal Hocko
Leon Romanovsky
Doug Ledford
Hans de Goede
Fredrik Noring
Colin Ian King
Marc Zyngier
Matthew Wilcox
Mario Limonciello
Kai-Heng Feng
Yoshihiro Shimoda
Pete Zaitcev
Ross Zwisler
Masahiro Yamada
Boqun Feng
Francis Deslauriers
Song Liu
Teijo Kinnunen
Trond Myklebust
James Smart
Lu Baolu
Mathias Nyman
Dennis Wassenberg
Roland Dreier
James Hogan
Matteo Croce
Seunghun Han