| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When clearing registers on new write requests was added, the protection
for currently running commands was missed leading to concurrent access
to the testunit registers. Check the flag beforehand.
Fixes: b39ab96aa894 ("i2c: testunit: add support for block process calls")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
|
|
STOP fallsthrough to WRITE_REQUESTED but this became problematic when
clearing the testunit registers was added to the latter. Actually, there
is no reason to clear the testunit state after STOP. Doing it when a new
WRITE_REQUESTED arrives is enough. So, no need to fallthrough, at all.
Fixes: b39ab96aa894 ("i2c: testunit: add support for block process calls")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
|
|
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the
ports member of 'struct mxser_board' triggers this restriction,
resulting in:
drivers/tty/mxser.c:291:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct mxser_port' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
291 | struct mxser_port ports[] __counted_by(nports);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: <stable@vger.kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/2026
Fixes: f34907ecca71 ("mxser: Annotate struct mxser_board with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240529-drop-counted-by-ports-mxser-board-v1-1-0ab217f4da6d@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
An unintended consequence of commit 9c573cd31343 ("randomize_kstack:
Improve entropy diffusion") was that the per-architecture entropy size
filtering reduced how many bits were being added to the mix, rather than
how many bits were being used during the offsetting. All architectures
fell back to the existing default of 0x3FF (10 bits), which will consume
at most 1KiB of stack space. It seems that this is working just fine,
so let's avoid the confusion and update everything to use the default.
The prior intent of the per-architecture limits were:
arm64: capped at 0x1FF (9 bits), 5 bits effective
powerpc: uncapped (10 bits), 6 or 7 bits effective
riscv: uncapped (10 bits), 6 bits effective
x86: capped at 0xFF (8 bits), 5 (x86_64) or 6 (ia32) bits effective
s390: capped at 0xFF (8 bits), undocumented effective entropy
Current discussion has led to just dropping the original per-architecture
filters. The additional entropy appears to be safe for arm64, x86,
and s390. Quoting Arnd, "There is no point pretending that 15.75KB is
somehow safe to use while 15.00KB is not."
Co-developed-by: Yuntao Liu <liuyuntao12@huawei.com>
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Fixes: 9c573cd31343 ("randomize_kstack: Improve entropy diffusion")
Link: https://lore.kernel.org/r/20240617133721.377540-1-liuyuntao12@huawei.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Link: https://lore.kernel.org/r/20240619214711.work.953-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/string_kunit.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/string_helpers_kunit.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240531-md-lib-string-v1-1-2738cf057d94@quicinc.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Update the maintainers entries to the new location of the
IOMMU tree.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Fixes compilation errors for Makefile snapshot target described in:
commit 231ce08b662a ("tools/power turbostat: Add "snapshot:" Makefile target")
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Commit 78464d7681f7 ("tools/power turbostat: Add columns for clustered
uncore frequency") introduced 'probe_intel_uncore_frequency_cluster()'
in a way which prevents printing uncore frequency columns if either of
the '-q' or '-l' options are used. Systems which do not have multiple
uncore frequencies per package are unaffected by this regression.
Fix the function so that uncore frequency columns are shown when either
the '-l' or '-q' option is used by checking if 'quiet' is true after
adding counters for the uncore frequency columns.
Fixes: 78464d7681f7 ("tools/power turbostat: Add columns for clustered uncore frequency")
Signed-off-by: Adam Hawley <adam.james.hawley@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
In some cases specifying the '-n' command line argument will cause
turbostat to fail. For instance 'turbostat -n 1' works fine; however,
'turbostat -n 1 -d' will fail. This is the result of the first call
to getopt_long_only() where "MP" is specified as the optstring. This can
be easily fixed by changing the optstring from "MP" to "MPn:" to remove
ambiguity between the arguments.
tools/power turbostat: option '-n' is ambiguous; possibilities: '-num_iterations' '-no-msr' '-no-perf'
Fixes: a0e86c90b83c ("tools/power turbostat: Add --no-perf option")
Signed-off-by: David Arcari <darcari@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
<maarten.lankhorst@linux.intel.com>, Maxime Ripard
<mripard@kernel.org>, Thomas Zimmermann <tzimmermann@suse.de>
filp->pid is supposed to be a refcounted pointer; however, before this
patch, drm_file_update_pid() only increments the refcount of a struct
pid after storing a pointer to it in filp->pid and dropping the
dev->filelist_mutex, making the following race possible:
process A process B
========= =========
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid B>, 1)
mutex_unlock(&dev->filelist_mutex)
begin drm_file_update_pid
mutex_lock(&dev->filelist_mutex)
rcu_replace_pointer(filp->pid, <pid A>, 1)
mutex_unlock(&dev->filelist_mutex)
get_pid(<pid A>)
synchronize_rcu()
put_pid(<pid B>) *** pid B reaches refcount 0 and is freed here ***
get_pid(<pid B>) *** UAF ***
synchronize_rcu()
put_pid(<pid A>)
As far as I know, this race can only occur with CONFIG_PREEMPT_RCU=y
because it requires RCU to detect a quiescent state in code that is not
explicitly calling into the scheduler.
This race leads to use-after-free of a "struct pid".
It is probably somewhat hard to hit because process A has to pass
through a synchronize_rcu() operation while process B is between
mutex_unlock() and get_pid().
Fix it by ensuring that by the time a pointer to the current task's pid
is stored in the file, an extra reference to the pid has been taken.
This fix also removes the condition for synchronize_rcu(); I think
that optimization is unnecessary complexity, since in that case we
would usually have bailed out on the lockless check above.
Fixes: 1c7a387ffef8 ("drm: Update file owner during use")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Building with W=1 in some configurations produces a false positive
warning for kallsyms:
kernel/kallsyms.c: In function '__sprint_symbol.isra':
kernel/kallsyms.c:503:17: error: 'strcpy' source argument is the same as destination [-Werror=restrict]
503 | strcpy(buffer, name);
| ^~~~~~~~~~~~~~~~~~~~
This originally showed up while building with -O3, but later started
happening in other configurations as well, depending on inlining
decisions. The underlying issue is that the local 'name' variable is
always initialized to the be the same as 'buffer' in the called functions
that fill the buffer, which gcc notices while inlining, though it could
see that the address check always skips the copy.
The calling conventions here are rather unusual, as all of the internal
lookup functions (bpf_address_lookup, ftrace_mod_address_lookup,
ftrace_func_address_lookup, module_address_lookup and
kallsyms_lookup_buildid) already use the provided buffer and either return
the address of that buffer to indicate success, or NULL for failure,
but the callers are written to also expect an arbitrary other buffer
to be returned.
Rework the calling conventions to return the length of the filled buffer
instead of its address, which is simpler and easier to follow as well
as avoiding the warning. Leave only the kallsyms_lookup() calling conventions
unchanged, since that is called from 16 different functions and
adapting this would be a much bigger change.
Link: https://lore.kernel.org/lkml/20200107214042.855757-1-arnd@arndb.de/
Link: https://lore.kernel.org/lkml/20240326130647.7bfb1d92@gandalf.local.home/
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
linereq_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linereq_create(), where,
to verify the intent of the user, the direction must be set to in order to
effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linereq_set_config(), but will take effect when the line value is next get
or set.
For example, by requesting a configuration with no flags set, an output
line with GPIO_V2_LINE_FLAG_ACTIVE_LOW and GPIO_V2_LINE_FLAG_OPEN_DRAIN
set could have those flags cleared, inverting the sense of the line and
changing the line drive to push-pull on the next line value set.
Skip the reconfiguration of lines for which the direction is not set, and
only reconfigure the lines for which direction is set.
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
linehandle_set_config() behaves badly when direction is not set.
The configuration validation is borrowed from linehandle_create(), where,
to verify the intent of the user, the direction must be set to in order
to effect a change to the electrical configuration of a line. But, when
applied to reconfiguration, that validation does not allow for the unset
direction case, making it possible to clear flags set previously without
specifying the line direction.
Adding to the inconsistency, those changes are not immediately applied by
linehandle_set_config(), but will take effect when the line value is next
get or set.
For example, by requesting a configuration with no flags set, an output
line with GPIOHANDLE_REQUEST_ACTIVE_LOW and GPIOHANDLE_REQUEST_OPEN_DRAIN
requested could have those flags cleared, inverting the sense of the line
and changing the line drive to push-pull on the next line value set.
Ensure the intent of the user by disallowing configurations which do not
have direction set, returning an error to userspace to indicate that the
configuration is invalid.
And, for clarity, use lflags, a local copy of gcnf.flags, throughout when
dealing with the requested flags, rather than a mixture of both.
Fixes: e588bb1eae31 ("gpio: add new SET_CONFIG ioctl() to gpio chardev")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function adev_release
calls kfree(madev). We shouldn't call kfree(madev) again
in the error handling path. Set 'madev' to NULL.
Fixes: a69839d4327d ("net: mana: Add support for auxiliary device")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Current code configures GCR3 even when device is attached to identity
domain. So that we can support SVA with identity domain. This means in
attach device path it updates Guest Translation related bits in DTE.
Commit de111f6b4f6a ("iommu/amd: Enable Guest Translation after reading
IOMMU feature register") missed to enable Control[GT] bit in resume
path. Its causing certain laptop to fail to resume after suspend.
This is because we have inconsistency between between control register
(GT is disabled) and DTE (where we have enabled guest translation related
bits) in resume path. And IOMMU hardware throws ILLEGAL_DEV_TABLE_ENTRY.
Fix it by enabling GT bit in resume path.
Reported-by: Błażej Szczygieł <spaz16@wp.pl>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218975
Fixes: de111f6b4f6a ("iommu/amd: Enable Guest Translation after reading IOMMU feature register")
Tested-by: Błażej Szczygieł <spaz16@wp.pl>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240621101533.20216-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When a domain is attached to a device, the required cache tags are
assigned to the domain so that the related caches can be flushed
whenever it is needed. The device TLB cache tag is created based
on whether the ats_enabled field of the device's iommu data is set.
This creates an ordered dependency between cache tag assignment and
ATS enabling.
The device TLB cache tag would not be created if device's ATS is
enabled after the cache tag assignment. This causes devices with PCI
ATS support to malfunction.
The ATS control is exclusively owned by the iommu driver. Hence, move
cache_tag_assign_domain() after PCI ATS enabling to make sure that the
device TLB cache tag is created for the domain.
Fixes: 3b1d9e2b2d68 ("iommu/vt-d: Add cache tag assignment interface")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240620062940.201786-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Commit 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix
potential TLB aliasing issue") introduced per device domain ID when
domain is configured with v2 page table. And in invalidation path, it
uses per device structure (dev_data->gcr3_info.domid) to get the domain ID.
In detach_device() path, current code tries to invalidate IOMMU cache
after removing dev_data from domain device list. This means when domain
is configured with v2 page table, amd_iommu_domain_flush_all() will not be
able to invalidate cache as device is already removed from domain device
list.
This is causing change domain tests (changing domain type from identity to DMA)
to fail with IO_PAGE_FAULT issue.
Hence invalidate cache and update DTE before updating data structures.
Reported-by: FahHean Lee <fahhean.lee@amd.com>
Reported-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Fixes: 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue")
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Tested-by: Sairaj Arun Kodilkar <sairaj.arunkodilkar@amd.com>
Tested-by: FahHean Lee <fahhean.lee@amd.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240620060552.13984-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To catch regression, let's check ioctl(SIOCATMARK) after every
send() and recv() calls.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Even if OOB data is recv()ed, ioctl(SIOCATMARK) must return 1 when the
OOB skb is at the head of the receive queue and no new OOB data is queued.
Without fix:
# RUN msg_oob.no_peek.oob ...
# msg_oob.c:305:oob:Expected answ[0] (0) == oob_head (1)
# oob: Test terminated by assertion
# FAIL msg_oob.no_peek.oob
not ok 2 msg_oob.no_peek.oob
With fix:
# RUN msg_oob.no_peek.oob ...
# OK msg_oob.no_peek.oob
ok 2 msg_oob.no_peek.oob
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When OOB data is in recvq, we can detect it with epoll by checking
EPOLLPRI.
This patch add checks for EPOLLPRI after every send() and recv() in
all test cases.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When data is sent with MSG_OOB, SIGURG is sent to a process if the
receiver socket has set its owner to the process by ioctl(FIOSETOWN)
or fcntl(F_SETOWN).
This patch adds SIGURG check after every send(MSG_OOB) call.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When SO_OOBINLINE is enabled on a socket, MSG_OOB can be recv()ed
without MSG_OOB flag, and ioctl(SIOCATMARK) will behaves differently.
This patch adds some test cases for SO_OOBINLINE.
Note the new test cases found two bugs in TCP.
1) After reading OOB data with non-inline mode, we can re-read
the data by setting SO_OOBINLINE.
# RUN msg_oob.no_peek.inline_oob_ahead_break ...
# msg_oob.c:146:inline_oob_ahead_break:AF_UNIX :world
# msg_oob.c:147:inline_oob_ahead_break:TCP :oworld
# OK msg_oob.no_peek.inline_oob_ahead_break
ok 14 msg_oob.no_peek.inline_oob_ahead_break
2) The head OOB data is dropped if SO_OOBINLINE is disabled
if a new OOB data is queued.
# RUN msg_oob.no_peek.inline_ex_oob_drop ...
# msg_oob.c:171:inline_ex_oob_drop:AF_UNIX :x
# msg_oob.c:172:inline_ex_oob_drop:TCP :y
# msg_oob.c:146:inline_ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:inline_ex_oob_drop:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.inline_ex_oob_drop
ok 17 msg_oob.no_peek.inline_ex_oob_drop
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, recv() is stopped at a consumed OOB skb even if a new
OOB skb is queued and we can ignore the old OOB skb.
>>> from socket import *
>>> c1, c2 = socket(AF_UNIX, SOCK_STREAM)
>>> c1.send(b'hellowor', MSG_OOB)
8
>>> c2.recv(1, MSG_OOB) # consume OOB data stays at middle of recvq.
b'r'
>>> c1.send(b'ld', MSG_OOB)
2
>>> c2.recv(10) # recv() stops at the old consumed OOB
b'hellowo' # should be 'hellowol'
manage_oob() should not stop recv() at the old consumed OOB skb if
there is a new OOB data queued.
Note that TCP behaviour is apparently wrong in this test case because
we can recv() the same OOB data twice.
Without fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:138:ex_oob_ahead_break:AF_UNIX :hellowo
# msg_oob.c:139:ex_oob_ahead_break:Expected:hellowol
# msg_oob.c:141:ex_oob_ahead_break:Expected ret[0] (7) == expected_len (8)
# ex_oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_ahead_break
not ok 11 msg_oob.no_peek.ex_oob_ahead_break
With fix:
# RUN msg_oob.no_peek.ex_oob_ahead_break ...
# msg_oob.c:146:ex_oob_ahead_break:AF_UNIX :hellowol
# msg_oob.c:147:ex_oob_ahead_break:TCP :helloworl
# OK msg_oob.no_peek.ex_oob_ahead_break
ok 11 msg_oob.no_peek.ex_oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
While testing, I found some weird behaviour on the TCP side as well.
For example, TCP drops the preceding OOB data when queueing a new
OOB data if the old OOB data is at the head of recvq.
# RUN msg_oob.no_peek.ex_oob_drop ...
# msg_oob.c:146:ex_oob_drop:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop:TCP :Resource temporarily unavailable
# msg_oob.c:146:ex_oob_drop:AF_UNIX :y
# msg_oob.c:147:ex_oob_drop:TCP :Invalid argument
# OK msg_oob.no_peek.ex_oob_drop
ok 9 msg_oob.no_peek.ex_oob_drop
# RUN msg_oob.no_peek.ex_oob_drop_2 ...
# msg_oob.c:146:ex_oob_drop_2:AF_UNIX :x
# msg_oob.c:147:ex_oob_drop_2:TCP :Resource temporarily unavailable
# OK msg_oob.no_peek.ex_oob_drop_2
ok 10 msg_oob.no_peek.ex_oob_drop_2
This patch allows AF_UNIX's MSG_OOB implementation to produce different
results from TCP when operations are guarded with tcp_incompliant{}.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Let's say a socket send()s "hello" with MSG_OOB and "world" without flags,
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
and its peer recv()s "hell" and "o".
>>> c2.recv(10)
b'hell'
>>> c2.recv(1, MSG_OOB)
b'o'
Now the consumed OOB skb stays at the head of recvq to return a correct
value for ioctl(SIOCATMARK), which is broken now and fixed by a later
patch.
Then, if peer issues recv() with MSG_DONTWAIT, manage_oob() returns NULL,
so recv() ends up with -EAGAIN.
>>> c2.setblocking(False) # This causes -EAGAIN even with available data
>>> c2.recv(5)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
BlockingIOError: [Errno 11] Resource temporarily unavailable
However, next recv() will return the following available data, "world".
>>> c2.recv(5)
b'world'
When the consumed OOB skb is at the head of the queue, we need to fetch
the next skb to fix the weird behaviour.
Note that the issue does not happen without MSG_DONTWAIT because we can
retry after manage_oob().
This patch also adds a test case that covers the issue.
Without fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# msg_oob.c:134:ex_oob_break:AF_UNIX :Resource temporarily unavailable
# msg_oob.c:135:ex_oob_break:Expected:ld
# msg_oob.c:137:ex_oob_break:Expected ret[0] (-1) == expected_len (2)
# ex_oob_break: Test terminated by assertion
# FAIL msg_oob.no_peek.ex_oob_break
not ok 8 msg_oob.no_peek.ex_oob_break
With fix:
# RUN msg_oob.no_peek.ex_oob_break ...
# OK msg_oob.no_peek.ex_oob_break
ok 8 msg_oob.no_peek.ex_oob_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
After consuming OOB data, recv() reading the preceding data must break at
the OOB skb regardless of MSG_PEEK.
Currently, MSG_PEEK does not stop recv() for AF_UNIX, and the behaviour is
not compliant with TCP.
>>> from socket import *
>>> c1, c2 = socketpair(AF_UNIX)
>>> c1.send(b'hello', MSG_OOB)
5
>>> c1.send(b'world')
5
>>> c2.recv(1, MSG_OOB)
b'o'
>>> c2.recv(9, MSG_PEEK) # This should return b'hell'
b'hellworld' # even with enough buffer.
Let's fix it by returning NULL for consumed skb and unlinking it only if
MSG_PEEK is not specified.
This patch also adds test cases that add recv(MSG_PEEK) before each recv().
Without fix:
# RUN msg_oob.peek.oob_ahead_break ...
# msg_oob.c:134:oob_ahead_break:AF_UNIX :hellworld
# msg_oob.c:135:oob_ahead_break:Expected:hell
# msg_oob.c:137:oob_ahead_break:Expected ret[0] (9) == expected_len (4)
# oob_ahead_break: Test terminated by assertion
# FAIL msg_oob.peek.oob_ahead_break
not ok 13 msg_oob.peek.oob_ahead_break
With fix:
# RUN msg_oob.peek.oob_ahead_break ...
# OK msg_oob.peek.oob_ahead_break
ok 13 msg_oob.peek.oob_ahead_break
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
AF_UNIX's MSG_OOB functionality lacked thorough testing, and we found
some bizarre behaviour.
The new selftest validates every MSG_OOB operation against TCP as a
reference implementation.
This patch adds only a few tests with basic send() and recv() that
do not fail.
The following patches will add more test cases for SO_OOBINLINE, SIGURG,
EPOLLPRI, and SIOCATMARK.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
test_unix_oob.c does not fully cover AF_UNIX's MSG_OOB functionality,
thus there are discrepancies between TCP behaviour.
Also, the test uses fork() to create message producer, and it's not
easy to understand and add more test cases.
Let's remove test_unix_oob.c and rewrite a new test.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In the TRACE_EVENT(qdisc_reset) NULL dereference occurred from
qdisc->dev_queue->dev <NULL> ->name
This situation simulated from bunch of veths and Bluetooth disconnection
and reconnection.
During qdisc initialization, qdisc was being set to noop_queue.
In veth_init_queue, the initial tx_num was reduced back to one,
causing the qdisc reset to be called with noop, which led to the kernel
panic.
I've attached the GitHub gist link that C converted syz-execprogram
source code and 3 log of reproduced vmcore-dmesg.
https://gist.github.com/yskelg/cc64562873ce249cdd0d5a358b77d740
Yeoreum and I use two fuzzing tool simultaneously.
One process with syz-executor : https://github.com/google/syzkaller
$ ./syz-execprog -executor=./syz-executor -repeat=1 -sandbox=setuid \
-enable=none -collide=false log1
The other process with perf fuzzer:
https://github.com/deater/perf_event_tests/tree/master/fuzzer
$ perf_event_tests/fuzzer/perf_fuzzer
I think this will happen on the kernel version.
Linux kernel version +v6.7.10, +v6.8, +v6.9 and it could happen in v6.10.
This occurred from 51270d573a8d. I think this patch is absolutely
necessary. Previously, It was showing not intended string value of name.
I've reproduced 3 time from my fedora 40 Debug Kernel with any other module
or patched.
version: 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug
[ 5287.164555] veth0_vlan: left promiscuous mode
[ 5287.164929] veth1_macvtap: left promiscuous mode
[ 5287.164950] veth0_macvtap: left promiscuous mode
[ 5287.164983] veth1_vlan: left promiscuous mode
[ 5287.165008] veth0_vlan: left promiscuous mode
[ 5287.165450] veth1_macvtap: left promiscuous mode
[ 5287.165472] veth0_macvtap: left promiscuous mode
[ 5287.165502] veth1_vlan: left promiscuous mode
…
[ 5297.598240] bridge0: port 2(bridge_slave_1) entered blocking state
[ 5297.598262] bridge0: port 2(bridge_slave_1) entered forwarding state
[ 5297.598296] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5297.598313] bridge0: port 1(bridge_slave_0) entered forwarding state
[ 5297.616090] 8021q: adding VLAN 0 to HW filter on device bond0
[ 5297.620405] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5297.620730] bridge0: port 2(bridge_slave_1) entered disabled state
[ 5297.627247] 8021q: adding VLAN 0 to HW filter on device team0
[ 5297.629636] bridge0: port 1(bridge_slave_0) entered blocking state
…
[ 5298.002798] bridge_slave_0: left promiscuous mode
[ 5298.002869] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5298.309444] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[ 5298.315206] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[ 5298.320207] bond0 (unregistering): Released all slaves
[ 5298.354296] hsr_slave_0: left promiscuous mode
[ 5298.360750] hsr_slave_1: left promiscuous mode
[ 5298.374889] veth1_macvtap: left promiscuous mode
[ 5298.374931] veth0_macvtap: left promiscuous mode
[ 5298.374988] veth1_vlan: left promiscuous mode
[ 5298.375024] veth0_vlan: left promiscuous mode
[ 5299.109741] team0 (unregistering): Port device team_slave_1 removed
[ 5299.185870] team0 (unregistering): Port device team_slave_0 removed
…
[ 5300.155443] Bluetooth: hci3: unexpected cc 0x0c03 length: 249 > 1
[ 5300.155724] Bluetooth: hci3: unexpected cc 0x1003 length: 249 > 9
[ 5300.155988] Bluetooth: hci3: unexpected cc 0x1001 length: 249 > 9
….
[ 5301.075531] team0: Port device team_slave_1 added
[ 5301.085515] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.085531] bridge0: port 1(bridge_slave_0) entered disabled state
[ 5301.085588] bridge_slave_0: entered allmulticast mode
[ 5301.085800] bridge_slave_0: entered promiscuous mode
[ 5301.095617] bridge0: port 1(bridge_slave_0) entered blocking state
[ 5301.095633] bridge0: port 1(bridge_slave_0) entered disabled state
…
[ 5301.149734] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.173234] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.180517] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.193481] hsr_slave_0: entered promiscuous mode
[ 5301.204425] hsr_slave_1: entered promiscuous mode
[ 5301.210172] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.210185] Cannot create hsr debugfs directory
[ 5301.224061] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[ 5301.246901] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[ 5301.255934] team0: Port device team_slave_0 added
[ 5301.256480] team0: Port device team_slave_1 added
[ 5301.256948] team0: Port device team_slave_0 added
…
[ 5301.435928] hsr_slave_0: entered promiscuous mode
[ 5301.446029] hsr_slave_1: entered promiscuous mode
[ 5301.455872] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.455884] Cannot create hsr debugfs directory
[ 5301.502664] hsr_slave_0: entered promiscuous mode
[ 5301.513675] hsr_slave_1: entered promiscuous mode
[ 5301.526155] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.526164] Cannot create hsr debugfs directory
[ 5301.563662] hsr_slave_0: entered promiscuous mode
[ 5301.576129] hsr_slave_1: entered promiscuous mode
[ 5301.580259] debugfs: Directory 'hsr0' with parent 'hsr' already present!
[ 5301.580270] Cannot create hsr debugfs directory
[ 5301.590269] 8021q: adding VLAN 0 to HW filter on device bond0
[ 5301.595872] KASAN: null-ptr-deref in range [0x0000000000000130-0x0000000000000137]
[ 5301.595877] Mem abort info:
[ 5301.595881] ESR = 0x0000000096000006
[ 5301.595885] EC = 0x25: DABT (current EL), IL = 32 bits
[ 5301.595889] SET = 0, FnV = 0
[ 5301.595893] EA = 0, S1PTW = 0
[ 5301.595896] FSC = 0x06: level 2 translation fault
[ 5301.595900] Data abort info:
[ 5301.595903] ISV = 0, ISS = 0x00000006, ISS2 = 0x00000000
[ 5301.595907] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 5301.595911] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 5301.595915] [dfff800000000026] address between user and kernel address ranges
[ 5301.595971] Internal error: Oops: 0000000096000006 [#1] SMP
…
[ 5301.596076] CPU: 2 PID: 102769 Comm:
syz-executor.3 Kdump: loaded Tainted:
G W ------- --- 6.10.0-0.rc2.20240608gitdc772f8237f9.29.fc41.aarch64+debug #1
[ 5301.596080] Hardware name: VMware, Inc. VMware20,1/VBSA,
BIOS VMW201.00V.21805430.BA64.2305221830 05/22/2023
[ 5301.596082] pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 5301.596085] pc : strnlen+0x40/0x88
[ 5301.596114] lr : trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596124] sp : ffff8000beef6b40
[ 5301.596126] x29: ffff8000beef6b40 x28: dfff800000000000 x27: 0000000000000001
[ 5301.596131] x26: 6de1800082c62bd0 x25: 1ffff000110aa9e0 x24: ffff800088554f00
[ 5301.596136] x23: ffff800088554ec0 x22: 0000000000000130 x21: 0000000000000140
[ 5301.596140] x20: dfff800000000000 x19: ffff8000beef6c60 x18: ffff7000115106d8
[ 5301.596143] x17: ffff800121bad000 x16: ffff800080020000 x15: 0000000000000006
[ 5301.596147] x14: 0000000000000002 x13: ffff0001f3ed8d14 x12: ffff700017ddeda5
[ 5301.596151] x11: 1ffff00017ddeda4 x10: ffff700017ddeda4 x9 : ffff800082cc5eec
[ 5301.596155] x8 : 0000000000000004 x7 : 00000000f1f1f1f1 x6 : 00000000f2f2f200
[ 5301.596158] x5 : 00000000f3f3f3f3 x4 : ffff700017dded80 x3 : 00000000f204f1f1
[ 5301.596162] x2 : 0000000000000026 x1 : 0000000000000000 x0 : 0000000000000130
[ 5301.596166] Call trace:
[ 5301.596175] strnlen+0x40/0x88
[ 5301.596179] trace_event_get_offsets_qdisc_reset+0x6c/0x2b0
[ 5301.596182] perf_trace_qdisc_reset+0xb0/0x538
[ 5301.596184] __traceiter_qdisc_reset+0x68/0xc0
[ 5301.596188] qdisc_reset+0x43c/0x5e8
[ 5301.596190] netif_set_real_num_tx_queues+0x288/0x770
[ 5301.596194] veth_init_queues+0xfc/0x130 [veth]
[ 5301.596198] veth_newlink+0x45c/0x850 [veth]
[ 5301.596202] rtnl_newlink_create+0x2c8/0x798
[ 5301.596205] __rtnl_newlink+0x92c/0xb60
[ 5301.596208] rtnl_newlink+0xd8/0x130
[ 5301.596211] rtnetlink_rcv_msg+0x2e0/0x890
[ 5301.596214] netlink_rcv_skb+0x1c4/0x380
[ 5301.596225] rtnetlink_rcv+0x20/0x38
[ 5301.596227] netlink_unicast+0x3c8/0x640
[ 5301.596231] netlink_sendmsg+0x658/0xa60
[ 5301.596234] __sock_sendmsg+0xd0/0x180
[ 5301.596243] __sys_sendto+0x1c0/0x280
[ 5301.596246] __arm64_sys_sendto+0xc8/0x150
[ 5301.596249] invoke_syscall+0xdc/0x268
[ 5301.596256] el0_svc_common.constprop.0+0x16c/0x240
[ 5301.596259] do_el0_svc+0x48/0x68
[ 5301.596261] el0_svc+0x50/0x188
[ 5301.596265] el0t_64_sync_handler+0x120/0x130
[ 5301.596268] el0t_64_sync+0x194/0x198
[ 5301.596272] Code: eb15001f 54000120 d343fc02 12000801 (38f46842)
[ 5301.596285] SMP: stopping secondary CPUs
[ 5301.597053] Starting crashdump kernel...
[ 5301.597057] Bye!
After applying our patch, I didn't find any kernel panic errors.
We've found a simple reproducer
# echo 1 > /sys/kernel/debug/tracing/events/qdisc/qdisc_reset/enable
# ip link add veth0 type veth peer name veth1
Error: Unknown device type.
However, without our patch applied, I tested upstream 6.10.0-rc3 kernel
using the qdisc_reset event and the ip command on my qemu virtual machine.
This 2 commands makes always kernel panic.
Linux version: 6.10.0-rc3
[ 0.000000] Linux version 6.10.0-rc3-00164-g44ef20baed8e-dirty
(paran@fedora) (gcc (GCC) 14.1.1 20240522 (Red Hat 14.1.1-4), GNU ld
version 2.41-34.fc40) #20 SMP PREEMPT Sat Jun 15 16:51:25 KST 2024
Kernel panic message:
[ 615.236484] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
[ 615.237250] Dumping ftrace buffer:
[ 615.237679] (ftrace buffer empty)
[ 615.238097] Modules linked in: veth crct10dif_ce virtio_gpu
virtio_dma_buf drm_shmem_helper drm_kms_helper zynqmp_fpga xilinx_can
xilinx_spi xilinx_selectmap xilinx_core xilinx_pr_decoupler versal_fpga
uvcvideo uvc videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videodev
videobuf2_common mc usbnet deflate zstd ubifs ubi rcar_canfd rcar_can
omap_mailbox ntb_msi_test ntb_hw_epf lattice_sysconfig_spi
lattice_sysconfig ice40_spi gpio_xilinx dwmac_altr_socfpga mdio_regmap
stmmac_platform stmmac pcs_xpcs dfl_fme_region dfl_fme_mgr dfl_fme_br
dfl_afu dfl fpga_region fpga_bridge can can_dev br_netfilter bridge stp
llc atl1c ath11k_pci mhi ath11k_ahb ath11k qmi_helpers ath10k_sdio
ath10k_pci ath10k_core ath mac80211 libarc4 cfg80211 drm fuse backlight ipv6
Jun 22 02:36:5[3 6k152.62-4sm98k4-0k]v kCePUr:n e1l :P IUDn:a b4le6
8t oC ohmma: nidpl eN oketr nteali nptaedg i6n.g1 0re.0q-urecs3t- 0at0
1v6i4r-tgu4a4le fa2d0dbraeeds0se-dir tyd f#f2f08
615.252376] Hardware name: linux,dummy-virt (DT)
[ 615.253220] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 615.254433] pc : strnlen+0x6c/0xe0
[ 615.255096] lr : trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[ 615.256088] sp : ffff800080b269a0
[ 615.256615] x29: ffff800080b269a0 x28: ffffc070f3f98500 x27:
0000000000000001
[ 615.257831] x26: 0000000000000010 x25: ffffc070f3f98540 x24:
ffffc070f619cf60
[ 615.259020] x23: 0000000000000128 x22: 0000000000000138 x21:
dfff800000000000
[ 615.260241] x20: ffffc070f631ad00 x19: 0000000000000128 x18:
ffffc070f448b800
[ 615.261454] x17: 0000000000000000 x16: 0000000000000001 x15:
ffffc070f4ba2a90
[ 615.262635] x14: ffff700010164d73 x13: 1ffff80e1e8d5eb3 x12:
1ffff00010164d72
[ 615.263877] x11: ffff700010164d72 x10: dfff800000000000 x9 :
ffffc070e85d6184
[ 615.265047] x8 : ffffc070e4402070 x7 : 000000000000f1f1 x6 :
000000001504a6d3
[ 615.266336] x5 : ffff28ca21122140 x4 : ffffc070f5043ea8 x3 :
0000000000000000
[ 615.267528] x2 : 0000000000000025 x1 : 0000000000000000 x0 :
0000000000000000
[ 615.268747] Call trace:
[ 615.269180] strnlen+0x6c/0xe0
[ 615.269767] trace_event_get_offsets_qdisc_reset+0x94/0x3d0
[ 615.270716] trace_event_raw_event_qdisc_reset+0xe8/0x4e8
[ 615.271667] __traceiter_qdisc_reset+0xa0/0x140
[ 615.272499] qdisc_reset+0x554/0x848
[ 615.273134] netif_set_real_num_tx_queues+0x360/0x9a8
[ 615.274050] veth_init_queues+0x110/0x220 [veth]
[ 615.275110] veth_newlink+0x538/0xa50 [veth]
[ 615.276172] __rtnl_newlink+0x11e4/0x1bc8
[ 615.276944] rtnl_newlink+0xac/0x120
[ 615.277657] rtnetlink_rcv_msg+0x4e4/0x1370
[ 615.278409] netlink_rcv_skb+0x25c/0x4f0
[ 615.279122] rtnetlink_rcv+0x48/0x70
[ 615.279769] netlink_unicast+0x5a8/0x7b8
[ 615.280462] netlink_sendmsg+0xa70/0x1190
Yeoreum and I don't know if the patch we wrote will fix the underlying
cause, but we think that priority is to prevent kernel panic happening.
So, we're sending this patch.
Fixes: 51270d573a8d ("tracing/net_sched: Fix tracepoints that save qdisc_dev() as a string")
Link: https://lore.kernel.org/lkml/20240229143432.273b4871@gandalf.local.home/t/
Cc: netdev@vger.kernel.org
Tested-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yunseong Kim <yskelg@gmail.com>
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20240624173320.24945-4-yskelg@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
register store validation for NFT_DATA_VALUE is conditional, however,
the datatype is always either NFT_DATA_VALUE or NFT_DATA_VERDICT. This
only requires a new helper function to infer the register type from the
set datatype so this conditional check can be removed. Otherwise,
pointer to chain object can be leaked through the registers.
Fixes: 96518518cc41 ("netfilter: add nftables")
Reported-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Work for __counted_by on generic pointers in structures (not just
flexible array members) has started landing in Clang 19 (current tip of
tree). During the development of this feature, a restriction was added
to __counted_by to prevent the flexible array member's element type from
including a flexible array member itself such as:
struct foo {
int count;
char buf[];
};
struct bar {
int count;
struct foo data[] __counted_by(count);
};
because the size of data cannot be calculated with the standard array
size formula:
sizeof(struct foo) * count
This restriction was downgraded to a warning but due to CONFIG_WERROR,
it can still break the build. The application of __counted_by on the fod
member of 'struct nvmet_fc_tgt_queue' triggers this restriction,
resulting in:
drivers/nvme/target/fc.c:151:2: error: 'counted_by' should not be applied to an array with element of unknown size because 'struct nvmet_fc_fcp_iod' is a struct type with a flexible array member. This will be an error in a future compiler version [-Werror,-Wbounds-safety-counted-by-elt-type-unknown-size]
151 | struct nvmet_fc_fcp_iod fod[] __counted_by(sqsize);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 error generated.
Remove this use of __counted_by to fix the warning/error. However,
rather than remove it altogether, leave it commented, as it may be
possible to support this in future compiler releases.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2027
Fixes: ccd3129aca28 ("nvmet-fc: Annotate struct nvmet_fc_tgt_queue with __counted_by")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Modify register setting sequence of enabling inline command
to fix issue of random interrupt from push-button.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/9a7a3a66cbcb426487ca6f558f45e922@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Fixes: e9e02819a98a ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
arch_stack_walk() is called intensively in function_graph when the
kernel is compiled with CONFIG_TRACE_IRQFLAGS. As a result, the kernel
logs a lot of arch_stack_walk and its sub-functions into the ftrace
buffer. However, these functions should not appear on the trace log
because they are part of the ftrace itself. This patch references what
arm64 does for the smae function. So it further prevent the re-enter
kprobe issue, which is also possible on riscv.
Related-to: commit 0fbcd8abf337 ("arm64: Prohibit instrumentation on arch_stack_walk()")
Fixes: 680341382da5 ("riscv: add CALLER_ADDRx support")
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240613-dev-andyc-dyn-ftrace-v4-v1-1-1a538e12c01e@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
We cannot delay the icache flush after patching some functions as we may
have patched a function that will get called before the icache flush.
The only way to completely avoid such scenario is by flushing the icache
as soon as we patch a function. This will probably be costly as we don't
batch the icache maintenance anymore.
Fixes: 6ca445d8af0e ("riscv: Fix early ftrace nop patching")
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Closes: https://lore.kernel.org/linux-riscv/20240613-lubricant-breath-061192a9489a@wendy/
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240624082141.153871-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Add the following Telit FN912 compositions:
0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=3000 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN912
S: SerialNumber=92c4c4d8
C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1bc7 ProdID=3001 Rev=05.15
S: Manufacturer=Telit Cinterion
S: Product=FN912
S: SerialNumber=92c4c4d8
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20240625102236.69539-1-dnlplm@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The i2c-viai2c-common.c file is used by two drivers, but is not a proper
abstraction and can get linked into both modules in the same configuration,
which results in a warning:
scripts/Makefile.build:236: drivers/i2c/busses/Makefile: i2c-viai2c-common.o is added to multiple modules: i2c-wmt i2c-zhaoxin
The other problems with this include the incorrect use of a __weak function
when both are built-in, and the fact that the "common" module is sprinked
with 'if (i2c->plat == ...)' checks that have knowledge about the differences
between the drivers using it.
Avoid the link time warning by making the common driver a proper module
with MODULE_LICENCE()/MODULE_AUTHOR() tags, and remove the __weak function
by slightly rearranging the code.
This adds a little more duplication between the two main drivers, but
those versions get more readable in the process.
Fixes: a06b80e83011 ("i2c: add zhaoxin i2c controller driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Hans Hu <HansHu-oc@zhaoxin.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
|
|
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly.
Signed-off-by: Vyacheslav Frantsishko <itmymaill@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20240626070334.45633-1-itmymaill@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
xfs_init_new_inode ignores the init_xattrs parameter for filesystems
that do not have ATTR enabled. As a result, the first init_xattrs file
to be created by the kernel will not have an attr fork created to store
acls. Storing that first acl will add ATTR to the superblock flags, so
subsequent files will be created with attr forks. The overhead of this
is so small that chances are that nobody has noticed this behavior.
However, this is disastrous on a filesystem with parent pointers because
it requires that a new linkable file /must/ have a pre-existing attr
fork, and the parent pointers code uses init_xattrs to create that fork.
The preproduction version of mkfs.xfs used to set this, but the V5 sb
verifier only requires ATTR2, not ATTR. There is no guard for
filesystems with (PARENT && !ATTR).
It turns out that I misunderstood the two flags -- ATTR means that we at
some point created an attr fork to store xattrs in a file; ATTR2
apparently means only that inodes have dynamic fork offsets or that the
filesystem was mounted with the "attr2" option.
Fixes: 2442ee15bb1e ("xfs: eager inode attr fork init needs attr feature awareness")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
The kernel reads userspace's buffer but does not write it back.
Therefore this is really an _IOW ioctl. Change this before 6.10 final
releases.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
For a very very long time, inode inactivation has set the inode size to
zero before unmapping the extents associated with the data fork.
Unfortunately, commit 3c6f46eacd876 changed the inode verifier to
prohibit zero-length symlinks and directories. If an inode happens to
get logged in this state and the system crashes before freeing the
inode, log recovery will also fail on the broken inode.
Therefore, allow zero-size symlinks and directories as long as the link
count is zero; nobody will be able to open these files by handle so
there isn't any risk of data exposure.
Fixes: 3c6f46eacd876 ("xfs: sanity check directory inode di_size")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs/205 produces the following failure when always_cow is enabled:
--- a/tests/xfs/205.out 2024-02-28 16:20:24.437887970 -0800
+++ b/tests/xfs/205.out.bad 2024-06-03 21:13:40.584000000 -0700
@@ -1,4 +1,5 @@
QA output created by 205
*** one file
+ !!! disk full (expected)
*** one file, a few bytes at a time
*** done
This is the result of overly aggressive attempts to align cow fork
delalloc reservations to the CoW extent size hint. Looking at the trace
data, we're trying to append a single fsblock to the "fred" file.
Trying to create a speculative post-eof reservation fails because
there's not enough space.
We then set @prealloc_blocks to zero and try again, but the cowextsz
alignment code triggers, which expands our request for a 1-fsblock
reservation into a 39-block reservation. There's not enough space for
that, so the whole write fails with ENOSPC even though there's
sufficient space in the filesystem to allocate the single block that we
need to land the write.
There are two things wrong here -- first, we shouldn't be attempting
speculative preallocations beyond what was requested when we're low on
space. Second, if we've already computed a posteof preallocation, we
shouldn't bother trying to align that to the cowextsize hint.
Fix both of these problems by adding a flag that only enables the
expansion of the delalloc reservation to the cowextsize if we're doing a
non-extending write, and only if we're not doing an ENOSPC retry. This
requires us to move the ENOSPC retry logic to xfs_bmapi_reserve_delalloc.
I probably should have caught this six years ago when 6ca30729c206d was
being reviewed, but oh well. Update the comments to reflect what the
code does now.
Fixes: 6ca30729c206d ("xfs: bmap code cleanup")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
xfs_can_free_eofblocks returns false for files that have persistent
preallocations unless the force flag is passed and there are delayed
blocks. This means it won't free delalloc reservations for files
with persistent preallocations unless the force flag is set, and it
will also free the persistent preallocations if the force flag is
set and the file happens to have delayed allocations.
Both of these are bad, so do away with the force flag and always free
only post-EOF delayed allocations for files with the XFS_DIFLAG_PREALLOC
or APPEND flags set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
|
|
Add the missing raw_spin_lock_init() call to gnr_gpio_probe().
Fixes: ecc4b1418e23 ("gpio: Add Intel Granite Rapids-D vGPIO driver")
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240625135343.673745-1-aapo.vienamo@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
HP EliteBook 645/665 G11 needs ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to
make mic-mute/audio-mute working.
Signed-off-by: Dirk Su <dirk.su@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240626021437.77039-1-dirk.su@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry,
and this eventually breaks the existing quirk for Lenovo Yoga Duet 7
13ITL6 equipped with the same PCI SSID 17aa:3820.
For applying a proper quirk for each model, check the codec SSID
additionally. Fortunately Yoga Duet has a different codec SSID,
0x17aa3802.
(Interestingly, 17aa:3802 has another conflict of SSID between another
Yoga model vs 14IRP8 which we had to work around similarly.)
Fixes: b1fd0d1285b1 ("ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM")
Link: https://patch.msgid.link/20240625155217.18767-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When allocating too huge a snapshot table, we should fail gracefully
in __snapshot_t_mut() instead of fail in kmalloc().
Reported-by: syzbot+770e99b65e26fa023ab1@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=770e99b65e26fa023ab1
Tested-by: syzbot+770e99b65e26fa023ab1@syzkaller.appspotmail.com
Signed-off-by: Pei Li <peili.dev@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Testing determined that the recent commit 9e046bb111f1 ("tcp: clear
tp->retrans_stamp in tcp_rcv_fastopen_synack()") has a race, and does
not always ensure retrans_stamp is 0 after a TFO payload retransmit.
If transmit completion for the SYN+data skb happens after the client
TCP stack receives the SYNACK (which sometimes happens), then
retrans_stamp can erroneously remain non-zero for the lifetime of the
connection, causing a premature ETIMEDOUT later.
Testing and tracing showed that the buggy scenario is the following
somewhat tricky sequence:
+ Client attempts a TFO handshake. tcp_send_syn_data() sends SYN + TFO
cookie + data in a single packet in the syn_data skb. It hands the
syn_data skb to tcp_transmit_skb(), which makes a clone. Crucially,
it then reuses the same original (non-clone) syn_data skb,
transforming it by advancing the seq by one byte and removing the
FIN bit, and enques the resulting payload-only skb in the
sk->tcp_rtx_queue.
+ Client sets retrans_stamp to the start time of the three-way
handshake.
+ Cookie mismatches or server has TFO disabled, and server only ACKs
SYN.
+ tcp_ack() sees SYN is acked, tcp_clean_rtx_queue() clears
retrans_stamp.
+ Since the client SYN was acked but not the payload, the TFO failure
code path in tcp_rcv_fastopen_synack() tries to retransmit the
payload skb. However, in some cases the transmit completion for the
clone of the syn_data (which had SYN + TFO cookie + data) hasn't
happened. In those cases, skb_still_in_host_queue() returns true
for the retransmitted TFO payload, because the clone of the syn_data
skb has not had its tx completetion.
+ Because skb_still_in_host_queue() finds skb_fclone_busy() is true,
it sets the TSQ_THROTTLED bit and the retransmit does not happen in
the tcp_rcv_fastopen_synack() call chain.
+ The tcp_rcv_fastopen_synack() code next implicitly assumes the
retransmit process is finished, and sets retrans_stamp to 0 to clear
it, but this is later overwritten (see below).
+ Later, upon tx completion, tcp_tsq_write() calls
tcp_xmit_retransmit_queue(), which puts the retransmit in flight and
sets retrans_stamp to a non-zero value.
+ The client receives an ACK for the retransmitted TFO payload data.
+ Since we're in CA_Open and there are no dupacks/SACKs/DSACKs/ECN to
make tcp_ack_is_dubious() true and make us call
tcp_fastretrans_alert() and reach a code path that clears
retrans_stamp, retrans_stamp stays nonzero.
+ Later, if there is a TLP, RTO, RTO sequence, then the connection
will suffer an early ETIMEDOUT due to the erroneously ancient
retrans_stamp.
The fix: this commit refactors the code to have
tcp_rcv_fastopen_synack() retransmit by reusing the relevant parts of
tcp_simple_retransmit() that enter CA_Loss (without changing cwnd) and
call tcp_xmit_retransmit_queue(). We have tcp_simple_retransmit() and
tcp_rcv_fastopen_synack() share code in this way because in both cases
we get a packet indicating non-congestion loss (MTU reduction or TFO
failure) and thus in both cases we want to retransmit as many packets
as cwnd allows, without reducing cwnd. And given that retransmits will
set retrans_stamp to a non-zero value (and may do so in a later
calling context due to TSQ), we also want to enter CA_Loss so that we
track when all retransmitted packets are ACked and clear retrans_stamp
when that happens (to ensure later recurring RTOs are using the
correct retrans_stamp and don't declare ETIMEDOUT prematurely).
Fixes: 9e046bb111f1 ("tcp: clear tp->retrans_stamp in tcp_rcv_fastopen_synack()")
Fixes: a7abf3cd76e1 ("tcp: consider using standard rtx logic in tcp_rcv_fastopen_synack()")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Link: https://patch.msgid.link/20240624144323.2371403-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If we're not in a NAPI softirq context, we need to be careful
about how we call napi_consume_skb(), specifically we need to
call it with budget==0 to signal to it that we're not in a
safe context.
This was found while running some configuration stress testing
of traffic and a change queue config loop running, and this
curious note popped out:
[ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545
[ 4371.402897] caller is napi_skb_cache_put+0x16/0x80
[ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G OE 6.10.0-rc3-netnext+ #8
[ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021
[ 4371.403460] Call Trace:
[ 4371.403613] <TASK>
[ 4371.403758] dump_stack_lvl+0x4f/0x70
[ 4371.403904] check_preemption_disabled+0xc1/0xe0
[ 4371.404051] napi_skb_cache_put+0x16/0x80
[ 4371.404199] ionic_tx_clean+0x18a/0x240 [ionic]
[ 4371.404354] ionic_tx_cq_service+0xc4/0x200 [ionic]
[ 4371.404505] ionic_tx_flush+0x15/0x70 [ionic]
[ 4371.404653] ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic]
[ 4371.404805] ionic_txrx_deinit+0x71/0x190 [ionic]
[ 4371.404956] ionic_reconfigure_queues+0x5f5/0xff0 [ionic]
[ 4371.405111] ionic_set_ringparam+0x2e8/0x3e0 [ionic]
[ 4371.405265] ethnl_set_rings+0x1f1/0x300
[ 4371.405418] ethnl_default_set_doit+0xbb/0x160
[ 4371.405571] genl_family_rcv_msg_doit+0xff/0x130
[...]
I found that ionic_tx_clean() calls napi_consume_skb() which calls
napi_skb_cache_put(), but before that last call is the note
/* Zero budget indicate non-NAPI context called us, like netpoll */
and
DEBUG_NET_WARN_ON_ONCE(!in_softirq());
Those are pretty big hints that we're doing it wrong. We can pass a
context hint down through the calls to let ionic_tx_clean() know what
we're doing so it can call napi_consume_skb() correctly.
Fixes: 386e69865311 ("ionic: Make use napi_consume_skb")
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://patch.msgid.link/20240624175015.4520-1-shannon.nelson@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There's no reason for discards to be single threaded across all devices;
this will improve performance on multi device setups.
Additionally, making them per-device simplifies the refcounting on
bch_dev->io_ref; we now hold it for the duration that the discard path
is running, which fixes a race between the discard path and device
removal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
Wolfram Sang
Nathan Chancellor
Kees Cook
Jeff Johnson
Joerg Roedel
Patryk Wlazlyn
Adam Hawley
David Arcari
Jann Horn
Arnd Bergmann
Kent Gibson
Ma Ke
Vasant Hegde
Lu Baolu
Kuniyuki Iwashima
Yunseong Kim
Pablo Neira Ayuso
Jack Yu
Takashi Iwai
Andy Chiu
Alexandre Ghiti
Daniele Palmas
Vyacheslav Frantsishko
Darrick J. Wong
Christoph Hellwig
Aapo Vienamo
Dirk Su
Pei Li
Neal Cardwell
Shannon Nelson
Kent Overstreet