| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-22-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Link: https://lkml.kernel.org/r/20200720155530.1173732-21-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Song Liu <song@kernel.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-20-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-19-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_raw_spinlock_t data type, which allows to associate
a raw spinlock with the sequence counter. This enables lockdep to verify
that the raw spinlock used for writer serialization is held when the
write side critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-18-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. If the serialization primitive is
not disabling preemption implicitly, preemption has to be explicitly
disabled before entering the sequence counter write side critical
section.
A plain seqcount_t does not contain the information of which lock must
be held when entering a write side critical section.
Use the new seqcount_spinlock_t and seqcount_mutex_t data types instead,
which allow to associate a lock with the sequence counter. This enables
lockdep to verify that the lock used for writer serialization is held
when the write side critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-17-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_rwlock_t data type, which allows to associate a
rwlock with the sequence counter. This enables lockdep to verify that
the rwlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-16-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-15-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. A plain seqcount_t does not
contain the information of which lock must be held when entering a write
side critical section.
Use the new seqcount_spinlock_t data type, which allows to associate a
spinlock with the sequence counter. This enables lockdep to verify that
the spinlock used for writer serialization is held when the write side
critical section is entered.
If lockdep is disabled this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-14-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. If the serialization primitive is
not disabling preemption implicitly, preemption has to be explicitly
disabled before entering the sequence counter write side critical
section.
The dma-buf reservation subsystem uses plain sequence counters to manage
updates to reservations. Writer serialization is accomplished through a
wound/wait mutex.
Acquiring a wound/wait mutex does not disable preemption, so this needs
to be done manually before and after the write side critical section.
Use the newly-added seqcount_ww_mutex_t instead:
- It associates the ww_mutex with the sequence count, which enables
lockdep to validate that the write side critical section is properly
serialized.
- It removes the need to explicitly add preempt_disable/enable()
around the write side critical section because the write_begin/end()
functions for this new data type automatically do this.
If lockdep is disabled this ww_mutex lock association is compiled out
and has neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lkml.kernel.org/r/20200720155530.1173732-13-a.darwish@linutronix.de
|
|
Commit 3c3b177a9369 ("reservation: add support for read-only access
using rcu") introduced a sequence counter to manage updates to
reservations. Back then, the reservation object initializer
reservation_object_init() was always inlined.
Having the sequence counter initialization inlined meant that each of
the call sites would have a different lockdep class key, which would've
broken lockdep's deadlock detection. The aforementioned commit thus
introduced, and exported, a custom seqcount lockdep class key and name.
The commit 8735f16803f00 ("dma-buf: cleanup reservation_object_init...")
transformed the reservation object initializer to a normal non-inlined C
function. seqcount_init(), which automatically defines the seqcount
lockdep class key and must be called non-inlined, can now be safely used.
Remove the seqcount custom lockdep class key, name, and export. Use
seqcount_init() inside the dma reservation object initializer.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lkml.kernel.org/r/20200720155530.1173732-12-a.darwish@linutronix.de
|
|
Parent commit, "seqlock: Extend seqcount API with associated locks",
introduced a big number of multi-line macros that are newline-escaped
at 72 columns.
For overall cohesion, align the earlier-existing macros similarly.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-11-a.darwish@linutronix.de
|
|
A sequence counter write side critical section must be protected by some
form of locking to serialize writers. If the serialization primitive is
not disabling preemption implicitly, preemption has to be explicitly
disabled before entering the write side critical section.
There is no built-in debugging mechanism to verify that the lock used
for writer serialization is held and preemption is disabled. Some usage
sites like dma-buf have explicit lockdep checks for the writer-side
lock, but this covers only a small portion of the sequence counter usage
in the kernel.
Add new sequence counter types which allows to associate a lock to the
sequence counter at initialization time. The seqcount API functions are
extended to provide appropriate lockdep assertions depending on the
seqcount/lock type.
For sequence counters with associated locks that do not implicitly
disable preemption, preemption protection is enforced in the sequence
counter write side functions. This removes the need to explicitly add
preempt_disable/enable() around the write side critical sections: the
write_begin/end() functions for these new sequence counter types
automatically do this.
Introduce the following seqcount types with associated locks:
seqcount_spinlock_t
seqcount_raw_spinlock_t
seqcount_rwlock_t
seqcount_mutex_t
seqcount_ww_mutex_t
Extend the seqcount read and write functions to branch out to the
specific seqcount_LOCKTYPE_t implementation at compile-time. This avoids
kernel API explosion per each new seqcount_LOCKTYPE_t added. Add such
compile-time type detection logic into a new, internal, seqlock header.
Document the proper seqcount_LOCKTYPE_t usage, and rationale, at
Documentation/locking/seqlock.rst.
If lockdep is disabled, this lock association is compiled out and has
neither storage size nor runtime overhead.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-10-a.darwish@linutronix.de
|
|
Preemption must be disabled before entering a sequence count write side
critical section. Failing to do so, the seqcount read side can preempt
the write side section and spin for the entire scheduler tick. If that
reader belongs to a real-time scheduling class, it can spin forever and
the kernel will livelock.
Assert through lockdep that preemption is disabled for seqcount writers.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-9-a.darwish@linutronix.de
|
|
Asserting that preemption is enabled or disabled is a critical sanity
check. Developers are usually reluctant to add such a check in a
fastpath as reading the preemption count can be costly.
Extend the lockdep API with macros asserting that preemption is disabled
or enabled. If lockdep is disabled, or if the underlying architecture
does not support kernel preemption, this assert has no runtime overhead.
References: f54bb2ec02c8 ("locking/lockdep: Add IRQs disabled/enabled assertion APIs: ...")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-8-a.darwish@linutronix.de
|
|
raw_seqcount_begin() has the same code as raw_read_seqcount(), with the
exception of masking the sequence counter's LSB before returning it to
the caller.
Note, raw_seqcount_begin() masks the counter's LSB before returning it
to the caller so that read_seqcount_retry() can fail if the counter is
odd -- without the overhead of an extra branching instruction.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-7-a.darwish@linutronix.de
|
|
seqlock.h is now included by kernel's RST documentation, but a small
number of the the exported seqlock.h functions are kernel-doc annotated.
Add kernel-doc for all seqlock.h exported APIs.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-6-a.darwish@linutronix.de
|
|
The seqlock.h seqcount_t and seqlock_t API definitions are presented in
the chronological order of their development rather than the order that
makes most sense to readers. This makes it hard to follow and understand
the header file code.
Group and reorder all of the exported seqlock.h functions according to
their function.
First, group together the seqcount_t standard read path functions:
- __read_seqcount_begin()
- raw_read_seqcount_begin()
- read_seqcount_begin()
since each function is implemented exactly in terms of the one above
it. Then, group the special-case seqcount_t readers on their own as:
- raw_read_seqcount()
- raw_seqcount_begin()
since the only difference between the two functions is that the second
one masks the sequence counter LSB while the first one does not. Note
that raw_seqcount_begin() can actually be implemented in terms of
raw_read_seqcount(), which will be done in a follow-up commit.
Then, group the seqcount_t write path functions, instead of injecting
unrelated seqcount_t latch functions between them, and order them as:
- raw_write_seqcount_begin()
- raw_write_seqcount_end()
- write_seqcount_begin_nested()
- write_seqcount_begin()
- write_seqcount_end()
- raw_write_seqcount_barrier()
- write_seqcount_invalidate()
which is the expected natural order. This also isolates the seqcount_t
latch functions into their own area, at the end of the sequence counters
section, and before jumping to the next one: sequential locks
(seqlock_t).
Do a similar grouping and reordering for seqlock_t "locking" readers vs.
the "conditionally locking or lockless" ones.
No implementation code was changed in any of the reordering above.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-5-a.darwish@linutronix.de
|
|
The seqcount_t latch reader example at the raw_write_seqcount_latch()
kernel-doc comment ends the latch read section with a manual smp memory
barrier and sequence counter comparison.
This is technically correct, but it is suboptimal: read_seqcount_retry()
already contains the same logic of an smp memory barrier and sequence
counter comparison.
End the latch read critical section example with read_seqcount_retry().
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-4-a.darwish@linutronix.de
|
|
Align the code samples and note sections inside kernel-doc comments with
tabs. This way they can be properly parsed and rendered by Sphinx. It
also makes the code samples easier to read from text editors.
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-3-a.darwish@linutronix.de
|
|
Proper documentation for the design and usage of sequence counters and
sequential locks does not exist. Complete the seqlock.h documentation as
follows:
- Divide all documentation on a seqcount_t vs. seqlock_t basis. The
description for both mechanisms was intermingled, which is incorrect
since the usage constrains for each type are vastly different.
- Add an introductory paragraph describing the internal design of, and
rationale for, sequence counters.
- Document seqcount_t writer non-preemptibility requirement, which was
not previously documented anywhere, and provide a clear rationale.
- Provide template code for seqcount_t and seqlock_t initialization
and reader/writer critical sections.
- Recommend using seqlock_t by default. It implicitly handles the
serialization and non-preemptibility requirements of writers.
At seqlock.h:
- Remove references to brlocks as they've long been removed from the
kernel.
- Remove references to gcc-3.x since the kernel's minimum supported
gcc version is 4.9.
References: 0f6ed63b1707 ("no need to keep brlock macros anymore...")
References: 6ec4476ac825 ("Raise gcc version requirement to 4.9")
Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-2-a.darwish@linutronix.de
|
|
This patch breaks a header loop involving qspinlock_types.h.
The issue is that qspinlock_types.h includes atomic.h, which then
eventually includes kernel.h which could lead back to the original
file via spinlock_types.h.
As ATOMIC_INIT is now defined by linux/types.h, there is no longer
any need to include atomic.h from qspinlock_types.h. This also
allows the CONFIG_PARAVIRT hack to be removed since it was trying
to prevent exactly this loop.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200729123316.GC7047@gondor.apana.org.au
|
|
This patch moves ATOMIC_INIT from asm/atomic.h into linux/types.h.
This allows users of atomic_t to use ATOMIC_INIT without having to
include atomic.h as that way may lead to header loops.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20200729123105.GB7047@gondor.apana.org.au
|
|
Currently lockdep_types.h includes list.h without actually using any
of its macros or functions. All it needs are the type definitions
which were moved into types.h long ago. This potentially causes
inclusion loops because both are included by many core header
files.
This patch moves the list.h inclusion into lockdep.h. Note that
we could probably remove it completely but that could potentially
result in compile failures should any end users not include list.h
directly and also be unlucky enough to not get list.h via some other
header file.
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200716063649.GA23065@gondor.apana.org.au
|
|
|
|
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
|
|
Some builds of GCC enable stack protector by default. Simply removing
the arguments is not sufficient to disable stack protector, as the stack
protector for those GCC builds must be explicitly disabled. Remove the
argument removals and add -fno-stack-protector. Additionally include
missed x32 argument updates, and adjust whitespace for readability.
Fixes: 20355e5f73a7 ("x86/entry: Exclude low level entry code from sanitizing")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook
|
|
It has been observed that Toshiba DT01ACA family drives have
WRITE FPDMA QUEUED command timeouts and sometimes just freeze until
power-cycled under heavy write loads when their temperature is getting
polled in SCT mode. The SMART mode seems to be fine, though.
Let's make sure we don't use SCT mode for these drives then.
While only the 3 TB model was actually caught exhibiting the problem let's
play safe here to avoid data corruption and extend the ban to the whole
family.
Fixes: 5b46903d8bf3 ("hwmon: Driver for disk and solid state drives with temperature sensors")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/0cb2e7022b66c6d21d3f189a12a97878d0e7511b.1595075458.git.mail@maciej.szmigiero.name
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop
machinery, so the TSS and Xen's io bitmap would get out of sync
whenever disabling a valid io bitmap.
Add a new pvop for tss_invalidate_io_bitmap() to fix it.
This is XSA-329.
Fixes: 22fe5b0439dd ("x86/ioperm: Move TSS bitmap update to exit to user work")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
|
|
Since 82af7aca ("Removal of FUTEX_FD"), some includes related to file
operations aren't needed anymore. More investigation around the includes
showed that a lot of includes aren't required for compilation, possible
due to redundant includes. Simplify the code by removing unused
includes.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200702202843.520764-4-andrealmeid@collabora.com
|
|
Since fshared is only conveying true/false values, declare it as bool.
In get_futex_key() the usage of fshared can be restricted to the first part
of the function. If fshared is false the function is terminated early and
the subsequent code can use a constant 'true' instead of the variable.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200702202843.520764-5-andrealmeid@collabora.com
|
|
As stated in the coding style documentation, "if there is no cleanup
needed then just return directly", instead of jumping to a label and
then returning.
Remove such goto's and replace with a return statement. When there's a
ternary operator on the return value, replace it with the result of the
operation when it is logically possible to determine it by the control
flow.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200702202843.520764-3-andrealmeid@collabora.com
|
|
Since 4b39f99c ("futex: Remove {get,drop}_futex_key_refs()"),
put_futex_key() is empty.
Remove all references for this function and the then redundant labels.
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200702202843.520764-2-andrealmeid@collabora.com
|
|
Setting interrupt affinity on inactive interrupts is inconsistent when
hierarchical irq domains are enabled. The core code should just store the
affinity and not call into the irq chip driver for inactive interrupts
because the chip drivers may not be in a state to handle such requests.
X86 has a hacky workaround for that but all other irq chips have not which
causes problems e.g. on GIC V3 ITS.
Instead of adding more ugly hacks all over the place, solve the problem in
the core code. If the affinity is set on an inactive interrupt then:
- Store it in the irq descriptors affinity mask
- Update the effective affinity to reflect that so user space has
a consistent view
- Don't call into the irq chip driver
This is the core equivalent of the X86 workaround and works correctly
because the affinity setting is established in the irq chip when the
interrupt is activated later on.
Note, that this is only effective when hierarchical irq domains are enabled
by the architecture. Doing it unconditionally would break legacy irq chip
implementations.
For hierarchial irq domains this works correctly as none of the drivers can
have a dependency on affinity setting in inactive state by design.
Remove the X86 workaround as it is not longer required.
Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
Reported-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com
Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
|
|
When an expiration delta falls into the last level of the wheel, that delta
has be compared against the maximum possible delay and reduced to fit in if
necessary.
However instead of comparing the delta against the maximum, the code
compares the actual expiry against the maximum. Then instead of fixing the
delta to fit in, it sets the maximum delta as the expiry value.
This can result in various undesired outcomes, the worst possible one
being a timer expiring 15 days ahead to fire immediately.
Fixes: 500462a9de65 ("timers: Switch to a non-cascading wheel")
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200717140551.29076-2-frederic@kernel.org
|
|
Reverting commit d03727b248d0 "NFSv4 fix CLOSE not waiting for
direct IO compeletion". This patch made it so that fput() by calling
inode_dio_done() in nfs_file_release() would wait uninterruptably
for any outstanding directIO to the file (but that wait on IO should
be killable).
The problem the patch was also trying to address was REMOVE returning
ERR_ACCESS because the file is still opened, is supposed to be resolved
by server returning ERR_FILE_OPEN and not ERR_ACCESS.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
While digging through the recent mmiowb preemption issue it came up that
we aren't actually preventing IO from crossing a scheduling boundary.
While it's a bit ugly to overload smp_mb__after_spinlock() with this
behavior, it's what PowerPC is doing so there's some precedent.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
To pick up the changes from:
83d31e5271ac ("KVM: nVMX: fixes for preemption timer migration")
That don't entail changes in tooling.
This silences these tools/perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up the changes in:
b2f9f1535bb9 ("libbpf: Fix libbpf hashmap on (I)LP32 architectures")
Silencing this warning:
Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h
I'll eventually update the warning to remove the "Kernel ABI" part
and instead state libbpf when noticing that the original is at
"tools/lib/something".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Jakub Bogusz <qboosh@pld-linux.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Ian Rogers <irogers@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Any option macro with _SET suffix should set opt->set variable which is
not happening for OPT_CALLBACK_SET(). This is causing issues with perf
record --switch-output-event. Fix that.
Before:
# ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \
--switch-output-event syscalls:sys_enter_mmap
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.297 MB perf.data (657 samples) ]
After:
$ ./perf record --overwrite -e sched:*switch,syscalls:sys_enter_mmap \
--switch-output-event syscalls:sys_enter_mmap
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2020061918144542 ]
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2020061918144608 ]
[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2020061918144660 ]
^C[ perf record: dump data: Woken up 1 times ]
[ perf record: Dump perf.data.2020061918144784 ]
[ perf record: Woken up 0 times to write data ]
[ perf record: Dump perf.data.2020061918144803 ]
[ perf record: Captured and wrote 0.419 MB perf.data.<timestamp> ]
Fixes: 636eb4d001b1 ("libsubcmd: Introduce OPT_CALLBACK_SET()")
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200619133412.50705-1-ravi.bangoria@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Forcefully unbinding PMU drivers during perf sampling will lead to
a kernel panic, because the perf upper-layer framework call a NULL
pointer in this situation.
To solve this issue, "suppress_bind_attrs" should be set to true, so
that bind/unbind can be disabled via sysfs and prevent unbinding PMU
drivers during perf sampling.
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/1594975763-32966-1-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Although mmiowb() is concerned only with serialising MMIO writes occuring
in contexts where a spinlock is held, the call to mmiowb_set_pending()
from the MMIO write accessors can occur in preemptible contexts, such
as during driver probe() functions where ordering between CPUs is not
usually a concern, assuming that the task migration path provides the
necessary ordering guarantees.
Unfortunately, the default implementation of mmiowb_set_pending() is not
preempt-safe, as it makes use of a a per-cpu variable to track its
internal state. This has been reported to generate the following splat
on riscv:
| BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
| caller is regmap_mmio_write32le+0x1c/0x46
| CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.8.0-rc3-hfu+ #1
| Call Trace:
| walk_stackframe+0x0/0x7a
| dump_stack+0x6e/0x88
| regmap_mmio_write32le+0x18/0x46
| check_preemption_disabled+0xa4/0xaa
| regmap_mmio_write32le+0x18/0x46
| regmap_mmio_write+0x26/0x44
| regmap_write+0x28/0x48
| sifive_gpio_probe+0xc0/0x1da
Although it's possible to fix the driver in this case, other splats have
been seen from other drivers, including the infamous 8250 UART, and so
it's better to address this problem in the mmiowb core itself.
Fix mmiowb_set_pending() by using the raw_cpu_ptr() to get at the mmiowb
state and then only updating the 'mmiowb_pending' field if we are not
preemptible (i.e. we have a non-zero nesting count).
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Emil Renner Berthing <kernel@esmil.dk>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Link: https://lore.kernel.org/r/20200716112816.7356-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Leading comma prevents arbitrary reordering of initialisation clauses.
The whole point of C99 initialisation is to allow any such reordering.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200711145954.GA1178171@localhost.localdomain
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200713115728.33905-1-grandmaster@al2klimov.de
|
|
Currently lockdep_types.h includes list.h without actually using any
of its macros or functions. All it needs are the type definitions
which were moved into types.h long ago. This potentially causes
inclusion loops because both are included by many core header
files.
This patch moves the list.h inclusion into lockdep.h. Note that
we could probably remove it completely but that could potentially
result in compile failures should any end users not include list.h
directly and also be unlucky enough to not get list.h via some other
header file.
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200716063649.GA23065@gondor.apana.org.au
|
|
task_h_load() can return 0 in some situations like running stress-ng
mmapfork, which forks thousands of threads, in a sched group on a 224 cores
system. The load balance doesn't handle this correctly because
env->imbalance never decreases and it will stop pulling tasks only after
reaching loop_max, which can be equal to the number of running tasks of
the cfs. Make sure that imbalance will be decreased by at least 1.
misfit task is the other feature that doesn't handle correctly such
situation although it's probably more difficult to face the problem
because of the smaller number of CPUs and running tasks on heterogenous
system.
We can't simply ensure that task_h_load() returns at least one because it
would imply to handle underflow in other places.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: <stable@vger.kernel.org> # v4.4+
Link: https://lkml.kernel.org/r/20200710152426.16981-1-vincent.guittot@linaro.org
|
|
If a regmap has "fast_io" set then its lock function uses a spinlock.
That doesn't work so well with the functions:
* regmap_cache_only_write_file()
* regmap_cache_bypass_write_file()
Both of the above functions have the pattern:
1. Lock the regmap.
2. Call:
debugfs_write_file_bool()
copy_from_user()
__might_fault()
__might_sleep()
Let's reorder things a bit so that we do all of our sleepable
functions before we grab the lock.
Fixes: d3dc5430d68f ("regmap: debugfs: Allow writes to cache state settings")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The clang integrated assembler requires the 'cmp' instruction to
have a length prefix here:
arch/x86/math-emu/wm_sqrt.S:212:2: error: ambiguous instructions require an explicit suffix (could be 'cmpb', 'cmpw', or 'cmpl')
cmp $0xffffffff,-24(%ebp)
^
Make this a 32-bit comparison, which it was clearly meant to be.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20200527135352.1198078-1-arnd@arndb.de
|
|
When assembling with Clang via `make LLVM_IAS=1` and CONFIG_HYPERV enabled,
we observe the following error:
<instantiation>:9:6: error: expected absolute expression
.if HYPERVISOR_REENLIGHTENMENT_VECTOR == 3
^
<instantiation>:1:1: note: while in macro instantiation
idtentry HYPERVISOR_REENLIGHTENMENT_VECTOR asm_sysvec_hyperv_reenlightenment sysvec_hyperv_reenlightenment has_error_code=0
^
./arch/x86/include/asm/idtentry.h:627:1: note: while in macro instantiation
idtentry_sysvec HYPERVISOR_REENLIGHTENMENT_VECTOR sysvec_hyperv_reenlightenment;
^
<instantiation>:9:6: error: expected absolute expression
.if HYPERVISOR_STIMER0_VECTOR == 3
^
<instantiation>:1:1: note: while in macro instantiation
idtentry HYPERVISOR_STIMER0_VECTOR asm_sysvec_hyperv_stimer0 sysvec_hyperv_stimer0 has_error_code=0
^
./arch/x86/include/asm/idtentry.h:628:1: note: while in macro instantiation
idtentry_sysvec HYPERVISOR_STIMER0_VECTOR sysvec_hyperv_stimer0;
This is caused by typos in arch/x86/include/asm/idtentry.h:
HYPERVISOR_REENLIGHTENMENT_VECTOR -> HYPERV_REENLIGHTENMENT_VECTOR
HYPERVISOR_STIMER0_VECTOR -> HYPERV_STIMER0_VECTOR
For more details see ClangBuiltLinux issue #1088.
Fixes: a16be368dd3f ("x86/entry: Convert various hypervisor vectors to IDTENTRY_SYSVEC")
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1088
Link: https://github.com/ClangBuiltLinux/linux/issues/1043
Link: https://lore.kernel.org/patchwork/patch/1272115/
Link: https://lkml.kernel.org/r/20200714194740.4548-1-sedat.dilek@gmail.com
|
|
Clang's integrated assembler does not allow symbols with non-absolute
values to be reassigned. Modify the interrupt entry loop macro to be
compatible with IAS by using a label and an offset.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Brian Gerst <brgerst@gmail.com>
Suggested-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Jian Cai <caij2003@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> #
Link: https://github.com/ClangBuiltLinux/linux/issues/1043
Link: https://lkml.kernel.org/r/20200714233024.1789985-1-caij2003@gmail.com
|
Ahmed S. Darwish
Herbert Xu
Linus Torvalds
Arvind Sankar
Kees Cook
Maciej S. Szmigiero
Andy Lutomirski
André Almeida
Thomas Gleixner
Frederic Weisbecker
Olga Kornievskaia
Palmer Dabbelt
Arnaldo Carvalho de Melo
Ravi Bangoria
Qi Liu
Will Deacon
Alexey Dobriyan
Alexander A. Klimov
Vincent Guittot
Douglas Anderson
Arnd Bergmann
Sedat Dilek
Jian Cai