aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-04-07ice: Remove unnecessary checks in add/kill_vid ndo opsBrett Creeley1-12/+0
Currently the driver is doing two unnecessary checks. First both ops are checking if the VLAN ID passed in is less than VLAN_N_VID and second both ops are checking to see if a port VLAN is configured on the VSI. The first check is already handled by the 8021q driver so this is an unnecessary check. The second check is unnecessary because the PF VSI is never put into a port VLAN. Remove these checks. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove rx_gro_dropped statAnirudh Venkataramanan4-6/+1
Tracking of the rx_gro_dropped statistic was removed in commit f73fc40327c0 ("ice: drop dead code in ice_receive_skb()"). Remove the associated variables and its reporting to ethtool stats. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Use local variable instead of pointer derefsAnirudh Venkataramanan1-15/+12
Replace multiple instances of vsi->back and pi->phy with equivalent local variables Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove unnecessary variableAnirudh Venkataramanan1-6/+1
In ice_init_phy_user_cfg, vsi is used only to get to hw. Remove this and just use pi->hw Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Limit forced overrides based on FW versionJeb Cramer1-12/+2
Beyond a specific version of firmware, there is no need to provide override values to the firmware when setting PHY capabilities. In this case, we do not need to indicate whether we're in Strict or Lenient Link Mode. In the case of translating capabilities to the configuration structure, the module compliance enforcement is already correctly set by firmware, so the extra code block is redundant. Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Use default configuration mode for PHY configurationAnirudh Venkataramanan6-42/+103
Recent firmware supports a new "get PHY capabilities" mode ICE_AQC_REPORT_DFLT_CFG which makes it unnecessary for the driver to track and apply NVM based default link overrides. If FW AQ API version supports it, use Report Default Configuration. Add check function for Report Default Configuration support and update accordingly. Also change adv_phy_type_[lo|hi] to advert_phy_type[lo|hi] for clarity. Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Replace some memsets and memcpys with assignmentAnirudh Venkataramanan1-7/+3
In ice_set_link_ksettings, use assignment instead of memset/memcpy where possible Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Fix error return codes in ice_set_link_ksettingsAnirudh Venkataramanan1-7/+7
Return more appropriate error codes so that the right error message is communicated to the user by ethtool. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Rename a couple of variablesAnirudh Venkataramanan1-25/+25
In ice_set_link_ksettings, change 'abilities' to 'phy_caps' and 'p' to 'pi'. This is more consistent with similar usages elsewhere in the driver. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Remove unnecessary checker loopAnirudh Venkataramanan1-9/+1
The loop checking for PF VSI doesn't make any sense. The VSI type backing the netdev passed to ice_set_link_ksettings will always be of type ICE_PF_VSI. Remove it. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Ignore EMODE return for opcode 0x0605Anirudh Venkataramanan4-38/+59
When link is owned by manageability, the driver is not allowed to fiddle with link. FW returns ICE_AQ_RC_EMODE if the driver attempts to do so. This patch adds a new function ice_set_link which abstracts the call to ice_aq_set_link_restart_an and provides a clean way to turn on/off link. While making this change, I also spotted that an int variable was being used to hold both an ice_status return code and the Linux errno return code. This pattern more often than not results in the driver inadvertently returning ice_status back to kernel which is a major boo-boo. Clean it up. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Align macro names to the specificationAnirudh Venkataramanan4-23/+24
For get PHY abilities AQ, the specification defines "report modes" as "with media", "without media" and "active configuration". For clarity, rename macros to align with the specification. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Modify recursive way of adding nodesVictor Raj1-53/+77
Remove the recursive way of adding the nodes to the layer in order to reduce the stack usage. Instead the algorithm is modified to use a while loop. The previous code was scanning recursively the nodes horizontally. The total stack consumption will be based on number of nodes present on that layer. In some cases it can consume more stack. Signed-off-by: Victor Raj <victor.raj@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07ice: Re-send some AQ commands, as result of EBUSY AQ errorChinh T Cao3-2/+84
Retry sending some AQ commands, as result of EBUSY AQ error. ice_aqc_opc_get_link_topo ice_aqc_opc_lldp_stop ice_aqc_opc_lldp_start ice_aqc_opc_lldp_filter_ctrl This change follows the latest guidelines from HW team. It is better to retry the same AQ command several times, as the result of EBUSY, instead of returning error to the caller right away. Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-04-07net: fealnx: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: atheros: atl2: use module_pci_driver to simplify the codeWei Yongjun1-23/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: sundance: use module_pci_driver to simplify the codeWei Yongjun1-14/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07tulip: de2104x: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07tulip: windbond-840: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07enic: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: encx24j600: use module_spi_driver to simplify the codeWei Yongjun1-11/+1
module_spi_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: wan: z85230: drop unused async stateJohan Hovold1-39/+0
According to the changelog, asynchronous mode was dropped sometime before v2.2. Let's get rid of the unused driver-specific async state as well so that it doesn't show up when doing tree-wide tty work. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07liquidio: Fix unintented sign extension of a left shift of a u16Colin Ian King1-1/+1
The macro CN23XX_PEM_BAR1_INDEX_REG is being used to shift oct->pcie_port (a u16) left 24 places. There are two subtle issues here, first the shift gets promoted to an signed int and then sign extended to a u64. If oct->pcie_port is 0x80 or more then the upper bits get sign extended to 1. Secondly shfiting a u16 24 bits will lead to an overflow so it needs to be cast to a u64 for all the bits to not overflow. It is entirely possible that the u16 port value is never large enough for this to fail, but it is useful to fix unintended overflows such as this. Fix this by casting the port parameter to the macro to a u64 before the shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 5bc67f587ba7 ("liquidio: CN23XX register definitions") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07xircom: remove redundant error check on variable errColin Ian King1-2/+0
The error check on err is always false as err is always 0 at the port_found label. The code is redundant and can be removed. Addresses-Coverity: ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: remove the new_ifindex argument from dev_change_net_namespaceAndrei Vagin6-13/+19
Here is only one place where we want to specify new_ifindex. In all other cases, callers pass 0 as new_ifindex. It looks reasonable to add a low-level function with new_ifindex and to convert dev_change_net_namespace to a static inline wrapper. Fixes: eeb85a14ee34 ("net: Allow to specify ifindex when device is moved to another namespace") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07net: introduce nla_policy for IFLA_NEW_IFINDEXAndrei Vagin1-3/+1
In this case, we don't need to check that new_ifindex is positive in validate_linkmsg. Fixes: eeb85a14ee34 ("net: Allow to specify ifindex when device is moved to another namespace") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07nfc/fdp: remove unnecessary assignment and labelwengjianfeng1-26/+16
In function fdp_nci_patch_otp and fdp_nci_patch_ram,many goto out statements are used, and out label just return variable r. in some places,just jump to the out label, and in other places, assign a value to the variable r,then jump to the out label. It is unnecessary, we just use return sentences to replace goto sentences and delete out label. Signed-off-by: wengjianfeng <wengjianfeng@yulong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mlxsw: core: Remove critical trip points from thermal zonesVadim Pasternak1-21/+6
Disable software thermal protection by removing critical trip points from all thermal zones. The software thermal protection is redundant given there are two layers of protection below it in firmware and hardware. The first layer is performed by firmware, the second, in case firmware was not able to perform protection, by hardware. The temperature threshold set for hardware protection is always higher than for firmware. Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07stmmac: intel: Enable SERDES PHY rx clk for PSEVoon Weifeng2-0/+11
EHL PSE SGMII mode requires to ungate the SERDES PHY rx clk for power up sequence and vice versa. Signed-off-by: Voon Weifeng <weifeng.voon@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07ethtool: document PHY tunable callbacksJakub Kicinski1-0/+2
Add missing kdoc for phy tunable callbacks. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: drop all sub-options except ADD_ADDR when the echo bit is setDavide Caratti1-1/+2
Current Linux carries echo-ed ADD_ADDR over pure TCP ACKs, so there is no need to add a DSS element that would fit only ADD_ADDR with IPv4 address. Drop the DSS from echo-ed ADD_ADDR, regardless of the IP version. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07selftests: mptcp: add the net device name testcaseGeliang Tang1-0/+8
This patch added a new testcase for setting the net device name. In it, pass the net device name to pm_nl_ctl to set the ifindex field of struct mptcp_pm_addr_entry. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: unify add_addr(6)_generate_hmacGeliang Tang1-56/+25
The length of the IPv4 address is 4 octets and IPv6 is 16. That's the only difference between add_addr_generate_hmac and add_addr6_generate_hmac. This patch dropped the duplicate code and unify them into one. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: drop MPTCP_ADDR_IPVERSION_4/6Geliang Tang2-9/+7
Since the type of the address family in struct mptcp_options_received became sa_family_t, we should set AF_INET/AF_INET6 to it, instead of using MPTCP_ADDR_IPVERSION_4/6. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: use mptcp_addr_info in mptcp_options_receivedGeliang Tang2-45/+23
This patch added a new struct mptcp_addr_info member addr in struct mptcp_options_received, and dropped the original family, addr_id, addr, addr6 and port fields in it. Then we can pass the parameter mp_opt.addr directly to mptcp_pm_add_addr_received and mptcp_pm_add_addr_echoed. Since the port number became big-endian now, use htons to convert the incoming port number to it. Also use ntohs to convert it when passing it to add_addr_generate_hmac or printing it out. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: drop OPTION_MPTCP_ADD_ADDR6Geliang Tang2-15/+9
Since the family field was added in struct mptcp_out_options, no need to use OPTION_MPTCP_ADD_ADDR6 to identify the IPv6 address. Drop it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: use mptcp_addr_info in mptcp_out_optionsGeliang Tang3-44/+33
This patch moved the mptcp_addr_info struct from protocol.h to mptcp.h, added a new struct mptcp_addr_info member addr in struct mptcp_out_options, and dropped the original addr, addr6, addr_id and port fields in it. Then we can use opts->addr to get the adding address from PM directly using mptcp_pm_add_addr_signal. Since the port number became big-endian now, use ntohs to convert it before sending it out with the ADD_ADDR suboption. Also convert it when passing it to add_addr_generate_hmac or printing it out. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07mptcp: move flags and ifindex out of mptcp_addr_infoGeliang Tang3-25/+28
This patch moved the flags and ifindex fields from struct mptcp_addr_info to struct mptcp_pm_addr_entry. Add the flags and ifindex values as two new parameters to __mptcp_subflow_connect. In mptcp_pm_create_subflow_or_signal_addr, pass the local address entry's flags and ifindex fields to __mptcp_subflow_connect. In mptcp_pm_nl_add_addr_received, just pass two zeros to it. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-07can: mcp251xfd: mcp251xfd_regmap_crc_read(): work around broken CRC on TBC registerMarc Kleine-Budde1-0/+34
MCP251XFD_REG_TBC is the time base counter register. It increments once per SYS clock tick, which is 20 or 40 MHz. Observation shows that if the lowest byte (which is transferred first on the SPI bus) of that register is 0x00 or 0x80 the calculated CRC doesn't always match the transferred one. To reproduce this problem let the driver read the TBC register in a high frequency. This can be done by attaching only the mcp251xfd CAN controller to a valid terminated CAN bus and send a single CAN frame. As there are no other CAN controller on the bus, the sent CAN frame is not ACKed and the mcp251xfd repeats it. If user space enables the bus error reporting, each of the NACK errors is reported with a time stamp (which is read from the TBC register) to user space. $ ip link set can0 down $ ip link set can0 up type can bitrate 500000 berr-reporting on $ cansend can0 4FF#ff.01.00.00.00.00.00.00 This leads to several error messages per second: | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 3a 86 da, CRC=0x7753) retrying. | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 01 b4 da, CRC=0x5830) retrying. | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 e9 23 db, CRC=0xa723) retrying. | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=00 8a 30 db, CRC=0x4a9c) retrying. | mcp251xfd spi0.0 can0: CRC read error at address 0x0010 (length=4, data=80 f3 43 db, CRC=0x66d2) retrying. If the highest bit in the lowest byte is flipped the transferred CRC matches the calculated one. We assume for now the CRC calculation in the chip works on wrong data and the transferred data is correct. This patch implements the following workaround: - If a CRC read error on the TBC register is detected and the lowest byte is 0x00 or 0x80, the highest bit of the lowest byte is flipped and the CRC is calculated again. - If the CRC now matches, the _original_ data is passed to the reader. For now we assume transferred data was OK. Link: https://lore.kernel.org/r/20210406110617.1865592-5-mkl@pengutronix.de Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: mcp251xfd: mcp251xfd_regmap_crc_read_one(): Factor out crc check into separate functionMarc Kleine-Budde1-10/+20
This patch factors out the crc check into a separate function. This is preparation for the next patch. Link: https://lore.kernel.org/r/20210406110617.1865592-4-mkl@pengutronix.de Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: mcp251xfd: add BQL supportMarc Kleine-Budde1-5/+18
This patch re-adds BQL support to the driver. Support for netdev_xmit_more() will be added in a separate patch series. Link: https://lore.kernel.org/r/20210406110617.1865592-3-mkl@pengutronix.de Cc: Manivannan Sadhasivam <mani@kernel.org> Cc: Thomas Kopp <thomas.kopp@microchip.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: c_can: remove unused enum BOSCH_C_CAN_PLATFORMMarc Kleine-Budde1-1/+0
This patch removes the unused enum BOSCH_C_CAN_PLATFORM. Link: https://lore.kernel.org/r/20210406110617.1865592-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: m_can: m_can_receive_skb(): add missing error handling to can_rx_offload_queue_sorted() callMarc Kleine-Budde1-3/+10
In commit 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") the RX path for peripherals (i.e. SPI based m_can controllers) was converted to the rx-offload infrastructure. However, the error handling for can_rx_offload_queue_sorted() was forgotten. can_rx_offload_queue_sorted() will return with an error if the internal queue is full. This patch adds the missing error handling, by increasing the rx_fifo_errors. Fixes: 1be37d3b0414 ("can: m_can: fix periph RX path: use rx-offload to ensure skbs are sent from softirq context") Link: https://lore.kernel.org/r/20210401084515.1455013-1-mkl@pengutronix.de Reported-by: coverity-bot <keescook+coverity-bot@chromium.org> Addresses-Coverity-ID: 1503583 ("Error handling issues") Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Torin Cooper-Bennun <torin@maxiluxsystems.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-07can: skb: alloc_can{,fd}_skb(): set "cf" to NULL if skb allocation failsMarc Kleine-Budde1-2/+8
The handling of CAN bus errors typically consist of allocating a CAN error SKB using alloc_can_err_skb() followed by stats handling and filling the error details in the newly allocated CAN error SKB. Even if the allocation of the SKB fails the stats handling should not be skipped. The common pattern in CAN drivers is to allocate the skb and work on the struct can_frame pointer "cf", if it has been assigned by alloc_can_err_skb(). | skb = alloc_can_err_skb(priv->ndev, &cf); | | /* RX errors */ | if (bdiag1 & (MCP251XFD_REG_BDIAG1_DCRCERR | | MCP251XFD_REG_BDIAG1_NCRCERR)) { | netdev_dbg(priv->ndev, "CRC error\n"); | | stats->rx_errors++; | if (cf) | cf->data[3] |= CAN_ERR_PROT_LOC_CRC_SEQ; | } In case of an OOM alloc_can_err_skb() returns NULL, but doesn't set "cf" to NULL as well. For the above pattern to work the "cf" has to be initialized to NULL, which is easily forgotten. To solve this kind of problems, set "cf" to NULL if alloc_can_err_skb() returns NULL. Link: https://lore.kernel.org/r/20210402102245.1512583-1-mkl@pengutronix.de Suggested-by: Vincent MAILHOL <mailhol.vincent@wanadoo.fr> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-04-06net/mlx5e: TC, Add support to offload sample actionChris Mi5-2/+328
The following diagram illustrates the hardware model for tc sample action: +---------------------+ + original flow table + +---------------------+ + original match + +---------------------+ | v +------------------------------------------------+ + Flow Sampler Object + +------------------------------------------------+ + sample ratio + +------------------------------------------------+ + sample table id | default table id + +------------------------------------------------+ | | v v +-----------------------------+ +----------------------------------------+ + sample table + + default table per <vport, chain, prio> + +-----------------------------+ +----------------------------------------+ + forward to management vport + + original match + +-----------------------------+ +----------------------------------------+ + other actions + +----------------------------------------+ The sample action is translated to a goto flow table object destination which samples packets according to the provided sample ratio. Sampled packets are duplicated. One copy is processed by a termination table, named the sample table, which sends the packet to the eswitch manager port (that will be processed by software). The second copy is processed by the default table which executes the subsequent actions. The default table is created per <vport, chain, prio> tuple as rules with different prios and chains may overlap. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-06net/mlx5e: TC, Handle sampled packetsChris Mi4-3/+35
Mark the sampled packets with a sample restore object. Send sampled packets using the psample api. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-06net/mlx5e: TC, Refactor tc update skb functionChris Mi1-26/+33
As a pre-step to process sampled packet in this function. Signed-off-by: Chris Mi <cmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-06net/mlx5e: TC, Add sampler restore handle APIChris Mi1-0/+108
Use common object pool to create an object ID to map sample parameters. Allocate a modify header action to write the object ID to reg_c0 lower 16 bits. Create a restore rule to pass the object ID to software. So software can identify sampled packets via the object ID and send it to userspace. Aggregate the modify header action, restore rule and object ID to a sample restore handle. Re-use identical sample restore handle for the same object ID. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-06net/mlx5e: TC, Add sampler object APIChris Mi1-0/+131
In order to offload sample action, HW introduces sampler object. The sampler object samples packets according to the provided sample ratio. Sampled packets are duplicated. One copy is processed by a termination table, named the sample table, which sends the packet up to software. The second copy is processed by the default table. Instantiate sampler object. Re-use identical sampler object for the same sample ratio, sample table and default table as a prestep for offloading tc sample actions. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-04-06net/mlx5e: TC, Add sampler termination table APIChris Mi6-0/+129
Sampled packets are sent to software using termination tables. There is only one rule in that table that is to forward sampled packets to the e-switch management vport. Create a sampler termination table and rule for each eswitch. Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>