aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2024-01-07net: stmmac: Use interrupt mode INTM=1 for per channel irqSwee Leong Ching2-13/+22
Enable per DMA channel interrupt that uses shared peripheral interrupt (SPI), so only per channel TX and RX intr (TI/RI) are handled by TX/RX ISR without calling common interrupt ISR. Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: stmmac: Add support for TX/RX channel interruptSwee Leong Ching1-0/+28
Enable TX/RX channel interrupt registration for MAC that interrupts CPU through shared peripheral interrupt (SPI). Per channel interrupts and interrupt-names are registered through, Eg: 4 tx and 4 rx channels: interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "dma_tx0", "dma_tx1", "dma_tx2", "dma_tx3", "dma_rx0", "dma_rx1", "dma_rx2", "dma_rx3"; Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: stmmac: Make MSI interrupt routine genericSwee Leong Ching5-20/+23
There is no support for per DMA channel interrupt for non-MSI platform, where the MAC's per channel interrupt hooks up to interrupt controller(GIC) through shared peripheral interrupt(SPI) to handle interrupt from TX/RX transmit channel. This patch generalize the existing MSI ISR to also support non-MSI platform. Signed-off-by: Teoh Ji Sheng <ji.sheng.teoh@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07dt-bindings: net: snps,dwmac: per channel irqSwee Leong Ching1-7/+17
Add dt-bindings for per channel irq. Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com> Signed-off-by: Swee Leong Ching <leong.ching.swee@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: phy: at803x: make read_status more genericChristian Marangi1-5/+12
Make read_status more generic in preparation on moving it to shared library as other PHY Family Driver will have the exact same implementation. The only specific part was a check for AR8031/33 if 1000basex was used. The check is moved to a dedicated function specific for those PHYs. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: phy: at803x: add support for cdt cross short test for qca808xChristian Marangi1-17/+69
QCA808x PHY Family supports Cable Diagnostic Test also for Cross Pair Short. Add all the define to make enable and support these additional tests. Cross Short test was previously disabled by default, this is now changed and enabled by default. In this mode, the mask changed a bit and length is shifted based on the fault condition. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: phy: at803x: refactor qca808x cable test get status functionChristian Marangi1-31/+49
Refactor qca808x cable test get status function to remove code duplication and clean things up. The same logic is applied to each pair hence it can be generalized and moved to a common function. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net: phy: at803x: generalize cdt fault length functionChristian Marangi1-7/+6
Generalize cable test fault length function since they all base on the same magic values (already reverse engineered to understand the meaning of it) to have consistenct values on every PHY. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07fib: rules: remove repeated assignment in fib_nl2ruleZhengchao Shao1-1/+0
In fib_nl2rule(), 'err' variable has been set to -EINVAL during declaration, and no need to set the 'err' variable to -EINVAL again. So, remove it. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07net/sched: simplify tc_action_load_ops parametersPedro Tammela3-10/+8
Instead of using two bools derived from a flags passed as arguments to the parent function of tc_action_load_ops, just pass the flags itself to tc_action_load_ops to simplify its parameters. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-07nfp: flower: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET1-7/+6
ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Note that the upper bound of ida_alloc_range() is inclusive while the one of ida_simple_get() was exclusive. So NFP_FL_LAG_GROUP_MAX has been decreased by 1. It now better watch the comment stating that "1 to 31 are valid". The only other user of NFP_FL_LAG_GROUP_MAX has been updated accordingly in nfp_fl_lag_put_unprocessed(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: ethtool: reject unsupported RSS input xfrm valuesAhmed Zaki1-0/+3
RXFH input_xfrm currently has three supported values: 0 (clear all), symmetric_xor and NO_CHANGE. Reject any other value sent from user-space. Fixes: 13e59344fb9d ("net: ethtool: add support for symmetric-xor RSS hash") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20240104212653.394424-1-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05selftests: forwarding: Avoid failures to source net/lib.shBenjamin Poirier1-1/+26
The expression "source ../lib.sh" added to net/forwarding/lib.sh in commit 25ae948b4478 ("selftests/net: add lib.sh") does not work for tests outside net/forwarding which source net/forwarding/lib.sh (1). It also does not work in some cases where only a subset of tests are exported (2). Avoid the problems mentioned above by replacing the faulty expression with a copy of the content from net/lib.sh which is used by files under net/forwarding. A more thorough solution which avoids duplicating content between net/lib.sh and net/forwarding/lib.sh has been posted here: https://lore.kernel.org/netdev/20231222135836.992841-1-bpoirier@nvidia.com/ The approach in the current patch is a stopgap solution to avoid submitting large changes at the eleventh hour of this development cycle. Example of problem 1) tools/testing/selftests/drivers/net/bonding$ ./dev_addr_lists.sh ./net_forwarding_lib.sh: line 41: ../lib.sh: No such file or directory TEST: bonding cleanup mode active-backup [ OK ] TEST: bonding cleanup mode 802.3ad [ OK ] TEST: bonding LACPDU multicast address to slave (from bond down) [ OK ] TEST: bonding LACPDU multicast address to slave (from bond up) [ OK ] An error message is printed but since the test does not use functions from net/lib.sh, the test results are not affected. Example of problem 2) tools/testing/selftests$ make install TARGETS="net/forwarding" tools/testing/selftests$ cd kselftest_install/net/forwarding/ tools/testing/selftests/kselftest_install/net/forwarding$ ./pedit_ip.sh veth{0..3} lib.sh: line 41: ../lib.sh: No such file or directory TEST: ping [ OK ] TEST: ping6 [ OK ] ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth1 ingress pedit ip src set 198.51.100.1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth2 egress pedit ip src set 198.51.100.1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth1 ingress pedit ip dst set 198.51.100.1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth2 egress pedit ip dst set 198.51.100.1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth1 ingress pedit ip6 src set 2001:db8:2::1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth2 egress pedit ip6 src set 2001:db8:2::1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth1 ingress pedit ip6 dst set 2001:db8:2::1 [FAIL] Expected to get 10 packets, but got . ./pedit_ip.sh: line 135: busywait: command not found TEST: dev veth2 egress pedit ip6 dst set 2001:db8:2::1 [FAIL] Expected to get 10 packets, but got . In this case, the test results are affected. Fixes: 25ae948b4478 ("selftests/net: add lib.sh") Suggested-by: Ido Schimmel <idosch@nvidia.com> Suggested-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240104141109.100672-1-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05ptp_ocp: adjust MAINTAINERS and mailmapVadim Fedorenko2-1/+4
The fb.com domain is going to be deprecated. Use personal one for kernel contributions. Signed-off-by: Vadim Fedorenko <vadfed@fb.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240104172540.2379128-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05geneve: use DEV_STATS_INC()Eric Dumazet1-12/+12
geneve updates dev->stats fields locklessly. Adopt DEV_STATS_INC() to avoid races. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240104163633.2070538-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05selftests/net: fix GRO coalesce test and add ext header coalesce testsRichard Gobert1-6/+87
Currently there is no test which checks that IPv6 extension header packets successfully coalesce. This commit adds a test, which verifies two IPv6 packets with HBH extension headers do coalesce, and another test which checks that packets with different extension header data do not coalesce in GRO. I changed the receive socket filter to accept a packet with one extension header. This change exposed a bug in the fragment test -- the old BPF did not accept the fragment packet. I updated correct_num_packets in the fragment test accordingly. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net: gro: parse ipv6 ext headers without frag0 invalidationRichard Gobert1-10/+41
The existing code always pulls the IPv6 header and sets the transport offset initially. Then optionally again pulls any extension headers in ipv6_gso_pull_exthdrs and sets the transport offset again on return from that call. skb->data is set at the start of the first extension header before calling ipv6_gso_pull_exthdrs, and must disable the frag0 optimization because that function uses pskb_may_pull/pskb_pull instead of skb_gro_ helpers. It sets the GRO offset to the TCP header with skb_gro_pull and sets the transport header. Then returns skb->data to its position before this block. This commit introduces a new helper function - ipv6_gro_pull_exthdrs - which is used in ipv6_gro_receive to pull ipv6 ext headers instead of ipv6_gso_pull_exthdrs. Thus, there is no modification of skb->data, all operations use skb_gro_* helpers, and the frag0 fast path can be taken for IPv6 packets with ext headers. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/504130f6-b56c-4dcc-882c-97942c59f5b7@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net: gso: add HBH extension header offload supportRichard Gobert2-14/+22
This commit adds net_offload to IPv6 Hop-by-Hop extension headers (as it is done for routing and dstopts) since it is supported in GSO and GRO. This allows to remove specific HBH conditionals in GSO and GRO when pulling and parsing an incoming packet. Signed-off-by: Richard Gobert <richardbgobert@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/d4f8825a-1d55-4b12-9d67-a254dbbfa6ae@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net: fill in MODULE_DESCRIPTION()s for CAIFJakub Kicinski4-0/+4
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the CAIF sub-modules. Link: https://lore.kernel.org/r/20240104144855.1320993-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net: fill in MODULE_DESCRIPTION() for AF_PACKETJakub Kicinski1-0/+1
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add description to net/packet/af_packet.c Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240104144119.1319055-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net: fill in MODULE_DESCRIPTION()s for DSA tagsJakub Kicinski18-0/+18
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the DSA tag modules. The descriptions are copy/pasted Kconfig names, with s/^Tag/DSA tag/. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20240104143759.1318137-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net: fill in MODULE_DESCRIPTION()s for ATMJakub Kicinski8-0/+8
W=1 builds now warn if module is built without a MODULE_DESCRIPTION(). Add descriptions to all the ATM modules and drivers. Link: https://lore.kernel.org/r/20240104143737.1317945-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net/mlx5: DPLL, Implement fractional frequency offset get pin opJiri Pirko1-0/+31
Implement ffo_get() pin op filling it up to MSEED.frequency_diff value. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240103132838.1501801-4-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net/mlx5: DPLL, Use struct to get values from mlx5_dpll_synce_status_get()Jiri Pirko1-35/+28
Instead of passing separate args, introduce struct mlx5_dpll_synce_status to hold the values obtained by mlx5_dpll_synce_status_get(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240103132838.1501801-3-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05dpll: expose fractional frequency offset value to userJiri Pirko4-0/+39
Add a new netlink attribute to expose fractional frequency offset value for a pin. Add an op to get the value from the driver. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Acked-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Link: https://lore.kernel.org/r/20240103132838.1501801-2-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-05net: dsa: bcm_sf2: drop priv->master_mii_dnVladimir Oltean2-4/+3
There used to be a of_node_put(priv->master_mii_dn) call in bcm_sf2_mdio_unregister(), which was accidentally deleted in commit 6ca80638b90c ("net: dsa: Use conduit and user terms"). But it's not needed - we don't need to hold a reference on the "brcm,unimac-mdio" OF node for that long, since we don't do anything with it. We can release it as soon as we finish bcm_sf2_mdio_register(). Also reduce "if (err && dn)" to just "if (err)". We know "dn", aka the former priv->master_mii_dn, is non-NULL. Otherwise, of_mdio_find_bus(dn) would not have been able to find the bus behind "brcm,unimac-mdio". Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: bcm_sf2: stop assigning an OF node to the ds->user_mii_busVladimir Oltean1-1/+0
The bcm_sf2 driver does something strange. Instead of calling of_mdiobus_register() with an OF node argument, it manually assigns the bus->dev->of_node and then calls the non-OF mdiobus_register(). This circumvents some code from __of_mdiobus_register() from running, which sets the auto-scan mask, parses some device tree properties, etc. I'm going to go out on a limb and say that the OF node isn't, in fact, needed at all, and can be removed. The MDIO diversion as initially implemented in commit 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") looked quite different than it is now, after commit 771089c2a485 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used"). Initially, it made sense, as bcm_sf2 was registering another set of driver ops for the "brcm,unimac-mdio" OF node. But now, it deletes all phandles, which makes "phy-handle"s unable to find PHYs, which means that it always goes through the OF-unaware dsa_user_phy_connect(). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: qca8k: use "dev" consistently within qca8k_mdio_register()Vladimir Oltean1-4/+5
Accessed either through priv->dev or ds->dev, it is the same device structure. Keep a single variable which holds a reference to it, and use it consistently. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: qca8k: consolidate calls to a single devm_of_mdiobus_register()Vladimir Oltean1-13/+11
__of_mdiobus_register() already calls __mdiobus_register() if the OF node provided as argument is NULL. We can take advantage of that and simplify the 2 code path, calling devm_of_mdiobus_register() only once for both cases. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: qca8k: assign ds->user_mii_bus only for the non-OF caseVladimir Oltean3-4/+6
To simplify reasoning about why the DSA framework provides the ds->user_mii_bus functionality, drivers should only use it if they need to. The qca8k driver appears to also use it simply as storage for a pointer, which is not a good enough reason to make the core much more difficult to follow. ds->user_mii_bus is useful for only 2 cases: 1. The driver probes on platform_data (no OF) 2. The driver probes on OF, but there is no OF node for the MDIO bus. It is unclear if case (1) is supported with qca8k. It might not be: the driver might crash when of_device_get_match_data() returns NULL and then it dereferences priv->info without NULL checking. Anyway, let us limit the ds->user_mii_bus usage only to the above cases, and not assign it when an OF node is present. The bus->phy_mask assignment follows along with the movement, because __of_mdiobus_register() overwrites this bus field anyway. The value set by the driver only matters for the non-OF code path. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: qca8k: skip MDIO bus creation if its OF node has status = "disabled"Vladimir Oltean1-3/+5
Currently the driver calls the non-OF devm_mdiobus_register() rather than devm_of_mdiobus_register() for this case, but it seems to rather be a confusing coincidence, and not a real use case that needs to be supported. If the device tree says status = "disabled" for the MDIO bus, we shouldn't need an MDIO bus at all. Instead, just exit as early as possible and do not call any MDIO API. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: qca8k: put MDIO bus OF node on qca8k_mdio_register() failureVladimir Oltean1-5/+16
of_get_child_by_name() gives us an OF node with an elevated refcount, which should be dropped when we're done with it. This is so that, if (of_node_check_flag(node, OF_DYNAMIC)) is true, the node's memory can eventually be freed. There are 2 distinct paths to be considered in qca8k_mdio_register(): - devm_of_mdiobus_register() succeeds: since commit 3b73a7b8ec38 ("net: mdio_bus: add refcounting for fwnodes to mdiobus"), the MDIO core treats this well. - devm_of_mdiobus_register() or anything up to that point fails: it is the duty of the qca8k driver to release the OF node. This change addresses the second case by making sure that the OF node reference is not leaked. The "mdio" node may be NULL, but of_node_put(NULL) is safe. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: lantiq_gswip: ignore MDIO buses disabled in OFVladimir Oltean1-3/+3
If the "lantiq,xrx200-mdio" child has status = "disabled", the MDIO bus creation should be avoided. Use of_device_is_available() to check for that, and take advantage of 2 facts: - of_device_is_available(NULL) returns false - of_node_put(NULL) is a no-op Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: lantiq_gswip: use devres for internal MDIO bus, not ds->user_mii_busVladimir Oltean1-38/+31
This driver does not need any of the functionalities that make ds->user_mii_bus special. Those use cases are listed here: https://lore.kernel.org/netdev/20231221174746.hylsmr3f7g5byrsi@skbuf/ It just makes use of ds->user_mii_bus only as storage for its own MDIO bus, which otherwise has no connection to the framework. This is because: - the gswip driver only probes on OF: it fails if of_device_get_match_data() returns NULL - when the child OF node of the MDIO bus is absent, no MDIO bus is registered at all, not even by the DSA framework. In order for that to have happened, the gswip driver would have needed to provide ->phy_read() and ->phy_write() in struct dsa_switch_ops, which it does not. We can break the connection between the gswip driver and the DSA framework and still preserve the same functionality. Since commit 3b73a7b8ec38 ("net: mdio_bus: add refcounting for fwnodes to mdiobus"), MDIO buses take ownership of the OF node handled to them, and release it on their own. The gswip driver no longer needs to do this. Combine that with devres, and we no longer need to keep track of anything for teardown purposes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: dsa: lantiq_gswip: delete irrelevant use of ds->phys_mii_maskVladimir Oltean1-1/+0
__of_mdiobus_register(), called right next, overwrites the phy_mask we just configured on the bus, so this is redundant and confusing. Delete it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-05net: sched: move block device tracking into tcf_block_get/put_ext()Jiri Pirko3-55/+14
Inserting the device to block xarray in qdisc_create() is not suitable place to do this. As it requires use of tcf_block() callback, it causes multiple issues. It is called for all qdisc types, which is incorrect. So, instead, move it to more suitable place, which is tcf_block_get_ext() and make sure it is only done for qdiscs that use block infrastructure and also only for blocks which are shared. Symmetrically, alter the cleanup path, move the xarray entry removal into tcf_block_put_ext(). Fixes: 913b47d3424e ("net/sched: Introduce tc block netdev tracking infra") Reported-by: Ido Schimmel <idosch@nvidia.com> Closes: https://lore.kernel.org/all/ZY1hBb8GFwycfgvd@shredder/ Reported-by: Kui-Feng Lee <sinquersw@gmail.com> Closes: https://lore.kernel.org/all/ce8d3e55-b8bc-409c-ace9-5cf1c4f7c88e@gmail.com/ Reported-and-tested-by: syzbot+84339b9e7330daae4d66@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/0000000000007c85f5060dcc3a28@google.com/ Reported-and-tested-by: syzbot+806b0572c8d06b66b234@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/00000000000082f2f2060dcc3a92@google.com/ Reported-and-tested-by: syzbot+0039110f932d438130f9@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/0000000000007fbc8c060dcc3a5c@google.com/ Signed-off-by: Jiri Pirko <jiri@nvidia.com> Tested-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Victor Nogueira <victor@mojatatu.com> Tested-by: Victor Nogueira <victor@mojatatu.com> Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-04selftests/bpf: Test re-attachment fix for bpf_tracing_prog_attachDmitrii Dolgov2-0/+53
Add a test case to verify the fix for "prog->aux->dst_trampoline and tgt_prog is NULL" branch in bpf_tracing_prog_attach. The sequence of events: 1. load rawtp program 2. load fentry program with rawtp as target_fd 3. create tracing link for fentry program with target_fd = 0 4. repeat 3 Acked-by: Jiri Olsa <olsajiri@gmail.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Link: https://lore.kernel.org/r/20240103190559.14750-5-9erthalion6@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04bpf: Fix re-attachment branch in bpf_tracing_prog_attachJiri Olsa1-0/+9
The following case can cause a crash due to missing attach_btf: 1) load rawtp program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10 bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation. Fixes: f3a95075549e0 ("bpf: Allow trampoline re-attach for tracing and lsm programs") Cc: stable@vger.kernel.org Signed-off-by: Jiri Olsa <olsajiri@gmail.com> Acked-by: Jiri Olsa <olsajiri@gmail.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Link: https://lore.kernel.org/r/20240103190559.14750-4-9erthalion6@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04selftests/bpf: Add test for recursive attachment of tracing progsDmitrii Dolgov3-0/+137
Verify the fact that only one fentry prog could be attached to another fentry, building up an attachment chain of limited size. Use existing bpf_testmod as a start of the chain. Acked-by: Jiri Olsa <olsajiri@gmail.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Link: https://lore.kernel.org/r/20240103190559.14750-3-9erthalion6@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04bpf: Relax tracing prog recursive attach rulesDmitrii Dolgov3-15/+48
Currently, it's not allowed to attach an fentry/fexit prog to another one fentry/fexit. At the same time it's not uncommon to see a tracing program with lots of logic in use, and the attachment limitation prevents usage of fentry/fexit for performance analysis (e.g. with "bpftool prog profile" command) in this case. An example could be falcosecurity libs project that uses tp_btf tracing programs. Following the corresponding discussion [1], the reason for that is to avoid tracing progs call cycles without introducing more complex solutions. But currently it seems impossible to load and attach tracing programs in a way that will form such a cycle. The limitation is coming from the fact that attach_prog_fd is specified at the prog load (thus making it impossible to attach to a program loaded after it in this way), as well as tracing progs not implementing link_detach. Replace "no same type" requirement with verification that no more than one level of attachment nesting is allowed. In this way only one fentry/fexit program could be attached to another fentry/fexit to cover profiling use case, and still no cycle could be formed. To implement, add a new field into bpf_prog_aux to track nested attachment for tracing programs. [1]: https://lore.kernel.org/bpf/20191108064039.2041889-16-ast@kernel.org/ Acked-by: Jiri Olsa <olsajiri@gmail.com> Acked-by: Song Liu <song@kernel.org> Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com> Link: https://lore.kernel.org/r/20240103190559.14750-2-9erthalion6@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04bpf, x86: Use emit_nops to replace memcpy x86_nopsLeon Hwang1-25/+22
Move emit_nops() before emit_prologue() and replace memcpy(prog, x86_nops[5], X86_PATCH_SIZE) with emit_nops(&prog, X86_PATCH_SIZE). Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Link: https://lore.kernel.org/r/20240104142226.87869-2-hffilwlqm@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04r8169: fix building with CONFIG_LEDS_CLASS=mHeiner Kallweit3-7/+11
When r8169 is built-in but LED support is a loadable module, the new code to drive the LED causes a link failure: ld: drivers/net/ethernet/realtek/r8169_leds.o: in function `rtl8168_init_leds': r8169_leds.c:(.text+0x36c): undefined reference to `devm_led_classdev_register_ext' LED support is an optional feature, so fix this issue by adding a Kconfig symbol R8169_LEDS that is guaranteed to be false if r8169 is built-in and LED core support is a module. As a positive side effect of this change r8169_leds.o no longer is built under this configuration. Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312281159.9TPeXbNd-lkp@intel.com/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Tested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/d055aeb5-fe5c-4ccf-987f-5af93a17537b@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04net: enetc: allow phy-mode = "1000base-x"Vladimir Oltean1-0/+3
The driver code proper is handled by the lynx_pcs. The enetc just needs to populate phylink's supported_interfaces array, and return true for this phy-mode in enetc_port_has_pcs(), such that it creates an internal MDIO bus through which the Lynx PCS registers are accessed. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20240103113445.3892971-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04Revert "Introduce PHY listing and link_topology tracking"Jakub Kicinski30-912/+35
This reverts commit 32bb4515e34469975abc936deb0a116c4a445817. This reverts commit d078d480639a4f3b5fc2d56247afa38e0956483a. This reverts commit fcc4b105caa4b844bf043375bf799c20a9c99db1. This reverts commit 345237dbc1bdbb274c9fb9ec38976261ff4a40b8. This reverts commit 7db69ec9cfb8b4ab50420262631fb2d1908b25bf. This reverts commit 95132a018f00f5dad38bdcfd4180d1af955d46f6. This reverts commit 63d5eaf35ac36cad00cfb3809d794ef0078c822b. This reverts commit c29451aefcb42359905d18678de38e52eccb3bb5. This reverts commit 2ab0edb505faa9ac90dee1732571390f074e8113. This reverts commit dedd702a35793ab462fce4c737eeba0badf9718e. This reverts commit 034fcc210349b873ece7356905be5c6ca11eef2a. This reverts commit 9c5625f559ad6fe9f6f733c11475bf470e637d34. This reverts commit 02018c544ef113e980a2349eba89003d6f399d22. Looks like we need more time for reviews, and incremental changes will be hard to make sense of. So revert. Link: https://lore.kernel.org/all/ZZP6FV5sXEf+xd58@shell.armlinux.org.uk/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04x86/csum: clean up `csum_partial' furtherLinus Torvalds1-44/+37
Commit 688eb8191b47 ("x86/csum: Improve performance of `csum_partial`") ended up improving the code generation for the IP csum calculations, and in particular special-casing the 40-byte case that is a hot case for IPv6 headers. It then had _another_ special case for the 64-byte unrolled loop, which did two chains of 32-byte blocks, which allows modern CPU's to improve performance by doing the chains in parallel thanks to renaming the carry flag. This just unifies the special cases and combines them into just one single helper the 40-byte csum case, and replaces the 64-byte case by a 80-byte case that just does that single helper twice. It avoids having all these different versions of inline assembly, and actually improved performance further in my tests. There was never anything magical about the 64-byte unrolled case, even though it happens to be a common size (and typically is the cacheline size). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-01-04x86/csum: Remove unnecessary odd handlingNoah Goldstein1-32/+4
The special case for odd aligned buffers is unnecessary and mostly just adds overhead. Aligned buffers is the expectations, and even for unaligned buffer, the only case that was helped is if the buffer was 1-byte from word aligned which is ~1/7 of the cases. Overall it seems highly unlikely to be worth to extra branch. It was left in the previous perf improvement patch because I was erroneously comparing the exact output of `csum_partial(...)`, but really we only need `csum_fold(csum_partial(...))` to match so its safe to remove. All csum kunit tests pass. Signed-off-by: Noah Goldstein <goldstein.w.n@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Laight <david.laight@aculab.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-01-04selftests/bpf: Test gotol with large offsetsIlya Leoshkevich1-0/+19
Test gotol with offsets that don't fit into a short (i.e., larger than 32k or smaller than -32k). Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20240102193531.3169422-4-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04selftests/bpf: Double the size of test_loader logIlya Leoshkevich1-1/+1
Testing long jumps requires having >32k instructions. That many instructions require the verifier log buffer of 2 megabytes. The regular test_progs run doesn't need an increased buffer, since gotol test with 40k instructions doesn't request a log, but test_progs -v will set the verifier log level. Hence to avoid breaking gotol test with -v increase the buffer size. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Yonghong Song <yonghong.song@linux.dev> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/r/20240102193531.3169422-3-iii@linux.ibm.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-04net: phy: aquantia: switch to crc_itu_t()Stephen Rothwell2-4/+4
After merging the net-next tree, today's linux-next build (x86_64 allmodconfig) failed like this: drivers/net/phy/aquantia/aquantia_firmware.c: In function 'aqr_fw_load_memory': drivers/net/phy/aquantia/aquantia_firmware.c:135:23: error: implicit declaration of function 'crc_ccitt_false'; did you mean 'crc_ccitt_byte'? [-Werror=implicit-function-declaration] 135 | crc = crc_ccitt_false(crc, crc_data, sizeof(crc_data)); | ^~~~~~~~~~~~~~~ | crc_ccitt_byte Caused by commit e93984ebc1c8 ("net: phy: aquantia: add firmware load support") interacting with commit ("lib: crc_ccitt_false() is identical to crc_itu_t()") from the mm tree. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20231221130946.7ed9a805@canb.auug.org.au Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-04Revert "octeon_ep_vf: add octeon_ep_vf driver"Jakub Kicinski21-5342/+0
This reverts commit c902ba322cfda8ebe54ffd53392ef7e2ef5d1c65. This reverts commit 50648968b3e3c193b45eaca07840111c9d4fdb74. This reverts commit 77cef1e02104529f54c5b8b4126317eda3ff132d. This reverts commit 8f8d322bc47c1c5ecab1f2238b644e30f69cc475. This reverts commit 6ca7b5486ebd5e7985f0c98a2ac7ae49078043a4. This reverts commit db468f92c3b9437dfeb1dcf55d9b7d1b97769a6c. This reverts commit 5f8c64c2344c888a03fa4b7fd8c3b5e0c235d879. This reverts commit ebdc193b2ce209bfc1ebec2f777cd7bac00b547c. The driver needs more work. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.