| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The offending commit removed the support for all packet rate metering.
Restore the pkt rate metering support by removing the restriction.
Fixes: 3603f26633e7 ("net/mlx5e: TC, allow meter jump control action")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The post meter table only matches on reg_c5. As such, the inner/outer
match levels are irrelevant for the match critieria. The cited patch only
sets the outer criteria to none, thus setting the inner match level for
encapsulated packets. This caused rules with police action on tunnel
devices to not find an existing flow group for the match criteria, thus
failing to offload the rule.
Set both the inner and outer match levels to none for post_meter rules.
Fixes: 0d8c38d44f33 ("net/mlx5e: TC, init post meter rules with branching attributes")
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The current code always does the accounting using the
stats from the parent interface (linked in the rq). This
doesn't work when there are child interfaces configured.
Fix this behavior by always using the stats from the child
interface priv. This will also work for parent only
interfaces: the child (netdev) and parent netdev (rq->netdev)
will point to the same thing.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A user is able to configure an arbitrary number of rx queues when
creating an interface via netlink. This doesn't work for child PKEY
interfaces because the child interface uses the parent receive channels.
Although the child shares the parent's receive channels, the number of
rx queues is important for the channel_stats array: the parent's rx
channel index is used to access the child's channel_stats. So the array
has to be at least as large as the parent's rx queue size for the
counting to work correctly and to prevent out of bound accesses.
This patch checks for the mentioned scenario and returns an error when
trying to create the interface. The error is propagated to the user.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
PKEY sub interfaces share the receive queues with the parent interface.
While setting the sub interface queue count is not supported, it is
currently possible to change the number of queues of the parent interface.
Thus we can end up with inconsistent queue sizes between the parent and its
sub interfaces.
This change disallows setting the queue count on the parent interface when
sub interfaces are present.
This is achieved by introducing an explicit reference to the parent netdev
in the mlx5i_priv of the child interface. An additional counter is also
required on the parent side to detect when sub interfaces are attached and
for proper cleanup.
The rtnl lock is taken during the ethtool op and the sub interface
ndo_init/uninit ops. There is no race here around counting the sub
interfaces, reading the sub interfaces and setting the number of
channels. The ASSERT_RTNL was added to document that.
Fixes: be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The native NIC port net device instance is being used as Uplink
representor. While changing profiles private resources are not
available, fix features ndo does not check if the netdev is present.
Add driver protection to verify private resources are ready.
Fixes: 7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).
Fix it by making command stats statically allocated on driver probe.
Kernel log:
[ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0
[ 2394.810610] PGD 0 P4D 0
[ 2394.811811] Oops: 0002 [#1] SMP NOPTI
...
[ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
...
[ 2394.829505] Call Trace:
[ 2394.830667] _raw_spin_lock_irq+0x23/0x26
[ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core]
[ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core]
[ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core]
[ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core]
[ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0
[ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100
[ 2394.838663] ? __rtnl_unlock+0x25/0x50
[ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150
[ 2394.840862] duplex_show+0x6e/0xc0
[ 2394.841963] dev_attr_show+0x1c/0x40
[ 2394.843048] sysfs_kf_seq_show+0x9b/0x100
[ 2394.844123] seq_read+0x153/0x410
[ 2394.845187] vfs_read+0x91/0x140
[ 2394.846226] ksys_read+0x4f/0xb0
[ 2394.847234] do_syscall_64+0x5b/0x1a0
[ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes: 34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When offloading TC NIC rule which has mod_hdr action, the
mod_hdr actions list is freed upon mod_hdr allocation.
In the new format of handling multi table actions and CT in
particular, the mod_hdr actions list is still relevant when
setting the pre and post rules and therefore, freeing the list
may cause adding rules which don't set the FTE_ID.
Therefore, the mod_hdr actions list needs to be kept for the
pre/post flows as well and should be left for these handler to
be freed.
Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix attr pointer validity checks after it was already
dereferenced.
Fixes: cb0d54cbf948 ("net/mlx5e: Fix wrong source vport matching on tunnel rule")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
If the kernel configuration asks the compiler to check frame limit of 1K,
dr_rule_create_rule_nic exceed this limit:
"stack frame size (1184) exceeds limit (1024)"
Fixing this issue by checking configured frame limit and using the
optimization STE array only for cases with the usual 2K (or larger)
stack size warning.
Fixes: b9b81e1e9382 ("net/mlx5: DR, For short chains of STEs, avoid allocating ste_arr dynamically")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
|
|
This reverts commit 42666b2c452ce87894786aae05e3fad3cfc6cb59.
This chip version seems to be very rare, but it exits in consumer
devices, see linked report.
Link: https://stackoverflow.com/questions/75049473/cant-setup-a-wired-network-in-archlinux-fresh-install
Fixes: 42666b2c452c ("r8169: disable detection of chip version 36")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/42e9674c-d5d0-a65a-f578-e5c74f244739@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
No regressions in MPLS tests:
# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0
[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.
The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.
Visible from the trace excerpt:
bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)
BUG: The filename is trimmed to sizeof (struct sockaddr).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes: 314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The blamed commit implemented the vcap_operations to allow to add an
entry in the TCAM. One of the callbacks is to validate the supported
keysets. If the TCAM lookup was not enabled, then this will return
failure so no entries could be added.
This doesn't make much sense, as you can enable at a later point the
TCAM. Therefore change it such to allow entries in TCAM even it is not
enabled.
Fixes: 4426b78c626d ("net: lan966x: Add port keyset config and callback interface")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jaroslav reported a recent throughput regression with virtio_net
caused by blamed commit.
It is unclear if DODGY GSO packets coming from user space
can be accepted by GRO engine in the future with minimal
changes, and if there is any expected gain from it.
In the meantime, make sure to detect and flush DODGY packets.
Fixes: 5eddb24901ee ("gro: add support of (hw)gro packets to gro stack")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-and-bisected-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.
Found by a modified version of syzkaller.
BUG: KASAN: use-after-free in dummy_timer
Call Trace:
memcpy (mm/kasan/shadow.c:65)
dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352)
transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972)
arch_static_branch (arch/x86/include/asm/jump_label.h:27)
static_key_false (include/linux/jump_label.h:207)
timer_expire_exit (include/trace/events/timer.h:127)
call_timer_fn (kernel/time/timer.c:1475)
expire_timers (kernel/time/timer.c:1519)
__run_timers (kernel/time/timer.c:1790)
run_timer_softirq (kernel/time/timer.c:1803)
Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Zero-length arrays are deprecated[1]. Replace struct
mlxsw_sp_nexthop_group_info's "nexthops" 0-length array with a flexible
array. Detected with GCC 13, using -fstrict-flex-arrays=3:
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_nexthop_group_hash_obj':
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3278:38: warning: array subscript i is outside array bounds of 'struct mlxsw_sp_nexthop[0]' [-Warray-bounds=]
3278 | val ^= jhash(&nh->ifindex, sizeof(nh->ifindex), seed);
| ^~~~~~~~~~~~
drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:2954:33: note: while referencing 'nexthops'
2954 | struct mlxsw_sp_nexthop nexthops[0];
| ^~~~~~~~
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays
Cc: Ido Schimmel <idosch@nvidia.com>
Cc: Petr Machata <petrm@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit b310de784bacd ("net: ipa: add IPA v4.7 support") was merged
despite an unresolved comment made by Konrad Dybcio. Konrad
observed that the IMEM region specified for IPA v4.7 did not match
that used downstream for the SM7225 SoC. In "lagoon.dtsi" present
in a Sony Xperia source tree, a ipa_smmu_ap node was defined with a
"qcom,additional-mapping" property that defined the IPA IMEM area
starting at offset 0x146a8000 (not 0x146a9000 that was committed).
The IPA v4.7 target system used for testing uses the SM7225 SoC, so
we'll adhere what the downstream code specifies is the address of
the IMEM region used for IPA.
Link: https://lore.kernel.org/linux-arm-msm/20221208211529.757669-1-elder@linaro.org
Fixes: b310de784bac ("net: ipa: add IPA v4.7 support")
Tested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The introduction of support for Apple board types inadvertently changed
the precedence order, causing hybrid SMBIOS+DT platforms to look up the
firmware using the DMI information instead of the device tree compatible
to generate the board type. Revert back to the old behavior,
as affected platforms use firmwares named after the DT compatible.
Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties")
[1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13
Cc: stable@vger.kernel.org
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An incoming call can race with rxrpc socket destruction, leading to a
leaked call. This may result in an oops when the call timer eventually
expires:
BUG: kernel NULL pointer dereference, address: 0000000000000874
RIP: 0010:_raw_spin_lock_irqsave+0x2a/0x50
Call Trace:
<IRQ>
try_to_wake_up+0x59/0x550
? __local_bh_enable_ip+0x37/0x80
? rxrpc_poke_call+0x52/0x110 [rxrpc]
? rxrpc_poke_call+0x110/0x110 [rxrpc]
? rxrpc_poke_call+0x110/0x110 [rxrpc]
call_timer_fn+0x24/0x120
with a warning in the kernel log looking something like:
rxrpc: Call 00000000ba5e571a still in use (1,SvAwtACK,1061d,0)!
incurred during rmmod of rxrpc. The 1061d is the call flags:
RECVMSG_READ_ALL, RX_HEARD, BEGAN_RX_TIMER, RX_LAST, EXPOSED,
IS_SERVICE, RELEASED
but no DISCONNECTED flag (0x800), so it's an incoming (service) call and
it's still connected.
The race appears to be that:
(1) rxrpc_new_incoming_call() consults the service struct, checks sk_state
and allocates a call - then pauses, possibly for an interrupt.
(2) rxrpc_release_sock() sets RXRPC_CLOSE, nulls the service pointer,
discards the prealloc and releases all calls attached to the socket.
(3) rxrpc_new_incoming_call() resumes, launching the new call, including
its timer and attaching it to the socket.
Fix this by read-locking local->services_lock to access the AF_RXRPC socket
providing the service rather than RCU in rxrpc_new_incoming_call().
There's no real need to use RCU here as local->services_lock is only
write-locked by the socket side in two places: when binding and when
shutting down.
Fixes: 5e6ef4f1017c ("rxrpc: Make the I/O thread take over the call and local processor work")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
|
|
PF netdev can request AF to enable or disable reception and transmission
on assigned CGX::LMAC. The current code instead of disabling or enabling
'reception and transmission' also disables/enable the LMAC. This patch
fixes this issue.
Fixes: 1435f66a28b4 ("octeontx2-af: CGX Rx/Tx enable/disable mbox handlers")
Signed-off-by: Angela Czubak <aczubak@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230105160107.17638-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This unexpected behavior is observed:
node 1 | node 2
------ | ------
link is established | link is established
reboot | link is reset
up | send discovery message
receive discovery message |
link is established | link is established
send discovery message |
| receive discovery message
| link is reset (unexpected)
| send reset message
link is reset |
It is due to delayed re-discovery as described in function
tipc_node_check_dest(): "this link endpoint has already reset
and re-established contact with the peer, before receiving a
discovery message from that node."
However, commit 598411d70f85 has changed the condition for calling
tipc_node_link_down() which was the acceptance of new media address.
This commit fixes this by restoring the old and correct behavior.
Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the connection setup of client calls to the I/O thread so that a whole
load of locking and barrierage can be eliminated. This necessitates the
app thread waiting for connection to complete before it can begin
encrypting data.
This also completes the fix for a race that exists between call connection
and call disconnection whereby the data transmission code adds the call to
the peer error distribution list after the call has been disconnected (say
by the rxrpc socket getting closed).
The fix is to complete the process of moving call connection, data
transmission and call disconnection into the I/O thread and thus forcibly
serialising them.
Note that the issue may predate the overhaul to an I/O thread model that
were included in the merge window for v6.2, but the timing is very much
changed by the change given below.
Fixes: cf37b5987508 ("rxrpc: Move DATA transmission into call processor work item")
Reported-by: syzbot+c22650d2844392afdcfd@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Move the management of the client connection cache to the I/O thread rather
than managing it from the namespace as an aggregate across all the local
endpoints within the namespace.
This will allow a load of locking to be got rid of in a future patch as
only the I/O thread will be looking at the this.
The downside is that the total number of cached connections on the system
can get higher because the limit is now per-local rather than per-netns.
We can, however, keep the number of client conns in use across the entire
netfs and use that to reduce the expiration time of idle connection.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
All the setters of call->state are now in the I/O thread and thus the state
lock is now unnecessary.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Move the call state changes that are made in rxrpc_recvmsg() to the I/O
thread. This means that, thenceforth, only the I/O thread does this and
the call state lock can be removed.
This requires the Rx phase to be ended when the last packet is received,
not when it is processed.
Since this now changes the rxrpc call state to SUCCEEDED before we've
consumed all the data from it, rxrpc_kernel_check_life() mustn't say the
call is dead until the recvmsg queue is empty (unless the call has failed).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Move all the call state changes that are made in rxrpc_sendmsg() to the I/O
thread. This is a step towards removing the call state lock.
This requires the switch to the RXRPC_CALL_CLIENT_AWAIT_REPLY and
RXRPC_CALL_SERVER_SEND_REPLY states to be done when the last packet is
decanted from ->tx_sendmsg to ->tx_buffer in the I/O thread, not when it is
added to ->tx_sendmsg by sendmsg().
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Wrap accesses to get the state of a call from outside of the I/O thread in
a single place so that the barrier needed to order wrt the error code and
abort code is in just that place.
Also use a barrier when setting the call state and again when reading the
call state such that the auxiliary completion info (error code, abort code)
can be read without taking a read lock on the call state lock.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Split out the functions that change the state of an rxrpc call into their
own file. The idea being to remove anything to do with changing the state
of a call directly from the rxrpc sendmsg() and recvmsg() paths and have
all that done in the I/O thread only, with the ultimate aim of removing the
state lock entirely. Moving the code out of sendmsg.c and recvmsg.c makes
that easier to manage.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Use the information now stored in struct rxrpc_call to configure the
connection bundle and thence the connection, rather than using the
rxrpc_conn_parameters struct.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Offload the completion of the challenge/response cycle on a service
connection to the I/O thread. After the RESPONSE packet has been
successfully decrypted and verified by the work queue, offloading the
changing of the call states to the I/O thread makes iteration over the
conn's channel list simpler.
Do this by marking the RESPONSE skbuff and putting it onto the receive
queue for the I/O thread to collect. We put it on the front of the queue
as we've already received the packet for it.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Make the set of connection IDs per local endpoint so that endpoints don't
cause each other's connections to get dismissed.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Tidy up the abort generation infrastructure in the following ways:
(1) Create an enum and string mapping table to list the reasons an abort
might be generated in tracing.
(2) Replace the 3-char string with the values from (1) in the places that
use that to log the abort source. This gets rid of a memcpy() in the
tracepoint.
(3) Subsume the rxrpc_rx_eproto tracepoint with the rxrpc_abort tracepoint
and use values from (1) to indicate the trace reason.
(4) Always make a call to an abort function at the point of the abort
rather than stashing the values into variables and using goto to get
to a place where it reported. The C optimiser will collapse the calls
together as appropriate. The abort functions return a value that can
be returned directly if appropriate.
Note that this extends into afs also at the points where that generates an
abort. To aid with this, the afs sources need to #define
RXRPC_TRACE_ONLY_DEFINE_ENUMS before including the rxrpc tracing header
because they don't have access to the rxrpc internal structures that some
of the tracepoints make use of.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Clean up connection abort, using the connection state_lock to gate access
to change that state, and use an rxrpc_call_completion value to indicate
the difference between local and remote aborts as these can be pasted
directly into the call state.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Provide a means by which an event notification can be sent to a connection
through such that the I/O thread can pick it up and handle it rather than
doing it in a separate workqueue.
This is then used to move the deferred final ACK of a call into the I/O
thread rather than a separate work queue as part of the drive to do all
transmission from the I/O thread.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Only perform call disconnection in the I/O thread to reduce the locking
requirement.
This is the first part of a fix for a race that exists between call
connection and call disconnection whereby the data transmission code adds
the call to the peer error distribution list after the call has been
disconnected (say by the rxrpc socket getting closed).
The fix is to complete the process of moving call connection, data
transmission and call disconnection into the I/O thread and thus forcibly
serialising them.
Note that the issue may predate the overhaul to an I/O thread model that
were included in the merge window for v6.2, but the timing is very much
changed by the change given below.
Fixes: cf37b5987508 ("rxrpc: Move DATA transmission into call processor work item")
Reported-by: syzbot+c22650d2844392afdcfd@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Only set the abort call completion state in the I/O thread and only
transmit ABORT packets from there. rxrpc_abort_call() can then be made to
actually send the packet.
Further, ABORT packets should only be sent if the call has been exposed to
the network (ie. at least one attempted DATA transmission has occurred for
it).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Call the rxrpc_conn_retransmit_call() directly from rxrpc_input_packet()
rather than calling it via connection event handling.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Make the local endpoint and it's I/O thread hold a reference on a connected
call until that call is disconnected. Without this, we're reliant on
either the AF_RXRPC socket to hold a ref (which is dropped when the call is
released) or a queued work item to hold a ref (the work item is being
replaced with the I/O thread).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
Stash the network namespace pointer in the rxrpc_local struct in addition
to a pointer to the rxrpc-specific net namespace info. Use this to remove
some places where the socket is passed as a parameter.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
|
|
This modem has 7 interfaces, 5 of them are serial interfaces and are
driven by cdc_acm, while 2 of them are wwan interfaces and are driven
by cdc_ether:
If 0: Abstract (modem)
If 1: Abstract (modem)
If 2: Abstract (modem)
If 3: Abstract (modem)
If 4: Abstract (modem)
If 5: Ethernet Networking
If 6: Ethernet Networking
Without this change, the 2 network interfaces will be named to usb0
and usb1, our QA think the names are confusing and filed a bug on it.
After applying this change, the name will be wwan0 and wwan1, and
they could work well with modem manager.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230105034249.10433-1-hui.wang@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In current driver, MAC will always enable 2ns delay in RGMII mode,
but that's not the correct usage.
Remove the dwmac_fix_mac_speed() in driver, and recommend "rgmii-id"
for phy-mode in device tree.
Fixes: f2d356a6ab71 ("stmmac: dwmac-mediatek: add support for mt8195")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dsi_irq_stats structure is a little too big to fit on the
stack of a 32-bit task, depending on the specific gcc options:
fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs':
fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Since this is only a debugfs file, performance is not critical,
so just dynamically allocate it, and print an error message
in there in place of a failure code when the allocation fails.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
When linktype is unknown or kzalloc failed in cfctrl_linkup_request(),
pkt is not released. Add release process to error path.
Fixes: b482cd2053e3 ("net-caif: add CAIF core protocol stack")
Fixes: 8d545c8f958f ("caif: Disconnect without waiting for response")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Because ICMP handlers run from softirq contexts,
they must not use current thread task_frag.
Previously, all sockets allocated by inet_ctl_sock_create()
would use the per-socket page fragment, with no chance of
recursion.
Fixes: 98123866fcf3 ("Treewide: Stop corrupting socket's task_frag")
Reported-by: syzbot+bebc6f1acdf4cbb79b03@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Benjamin Coddington <bcodding@redhat.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20230103192736.454149-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When an ULP-enabled socket enters the LISTEN status, the listener ULP data
pointer is copied inside the child/accepted sockets by sk_clone_lock().
The relevant ULP can take care of de-duplicating the context pointer via
the clone() operation, but only MPTCP and SMC implement such op.
Other ULPs may end-up with a double-free at socket disposal time.
We can't simply clear the ULP data at clone time, as TLS replaces the
socket ops with custom ones assuming a valid TLS ULP context is
available.
Instead completely prevent clone-less ULP sockets from entering the
LISTEN status.
Fixes: 734942cc4ea6 ("tcp: ULP infrastructure")
Reported-by: slipper <slipper.alive@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop
that can run 500K times, so calls to qed_mcp_nvm_rd_cmd()
may block the current thread for over 5s.
We observed thread scheduling delays over 700ms in production,
with stacktraces pointing to this code as the culprit.
qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted.
It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd().
Add a "can sleep" parameter to qed_find_nvram_image() and
qed_nvram_read() so they can sleep during qed_mcp_trace_dump().
qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(),
called only by qed_mcp_trace_dump(), allow these functions to sleep.
I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep,
so keep b_can_sleep set to false when it calls these functions.
An example stacktrace from a custom warning we added to the kernel
showing a thread that has not scheduled despite long needing resched:
[ 2745.362925,17] ------------[ cut here ]------------
[ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0()
[ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99
[ 2745.362956,17] Modules linked in: ...
[ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x
[ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020
[ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20
[ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000
[ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000
[ 2745.363379,17] Call Trace:
[ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf
[ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0
[ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50
[ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0
[ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0
[ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89
[ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50
[ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40
[ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed]
[ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed]
[ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed]
[ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed]
[ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed]
[ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed]
[ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed]
[ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede]
[ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190
[ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140
[ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260
[ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0
[ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370
[ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90
[ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710
[ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60
[ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280
[ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220
[ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0
[ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70
[ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79
[ 2745.363622,17] ---[ end trace f6954aa440266421 ]---
Fixes: c965db4446291 ("qed: Add support for debug data collection")
Signed-off-by: Caleb Sander <csander@purestorage.com>
Acked-by: Alok Prasad <palok@marvell.com>
Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We missed the window between the TIF flag update and the next reschedule.
Signed-off-by: Rodrigo Branco <bsdaemon@google.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
|
|
Vivek has decided to transfer the maintainership of the VMware virtual
PTP clock driver (ptp_vmw) to Srivatsa and Deep. Update the
MAINTAINERS file to reflect this change, and also add Alexey as a
reviewer for the driver.
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Acked-by: Vivek Thampi <vivek@vivekthampi.com>
Acked-by: Deep Shah <sdeep@vmware.com>
Acked-by: Alexey Makhalov <amakhalov@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both <linux/mmiotrace.h> and <asm/insn-eval.h> define various MMIO_ enum constants,
whose namespace overlaps.
Rename the <asm/insn-eval.h> ones to have a INSN_ prefix, so that the headers can be
used from the same source file.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230101162910.710293-2-Jason@zx2c4.com
|
Oz Shlomo
Dragos Tatulea
Roy Novich
Moshe Shemesh
Ariel Levkovich
Yevgeny Kliteynik
Heiner Kallweit
Ido Schimmel
Mirsad Goran Todorovac
Horatiu Vultur
Eric Dumazet
Minsuk Kang
Kees Cook
Alex Elder
Ivan T. Ivanov
David Howells
Angela Czubak
Tung Nguyen
Hui Wang
Biao Huang
Arnd Bergmann
Zhengchao Shao
Paolo Abeni
Caleb Sander
Rodrigo Branco
Srivatsa S. Bhat (VMware)
Jason A. Donenfeld