| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This consists of:
1. Expose the 100G/lane capability bit in the PCAM reg.
2. Expose the per link mode FEC capability masks in the PPLM reg.
3. Set the overrides according to ethtool parameters.
FEC for new modes is set if and only if the PCAM 100G/lane capability is
advertised and the capability mask for a given link mode reports that it
can accept the requested FEC mode.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240404173357.123307-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The check of whether a given FEC mode is supported in a given link mode
is about to get more complicated, so extract it in a separate function
to avoid code duplication.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20240404173357.123307-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the correct tmo_us microsecond parameter for the PTP firmware
timeout parameter.
Fixes: 7de3c2218eed ("bnxt_en: Add a timeout parameter to bnxt_hwrm_port_ts_query()")
Reported-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240404195500.171071-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already have a variable to provide number of entries. So use it,
instead of using error number.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-9-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The read/write path may fail. So, return error if we got it.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-8-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EAGAIN was not used by previous code and not used by current code. So,
remove it and use proper error value.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-7-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use 'ret' instead of 'rc' in ksz8_r_dyn_mac_table() to maintain
consistency with the rest of the file.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the code out of a long if statement scope in ksz8_r_dyn_mac_table()
to improve code readability.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Refactor ksz8_fdb_dump() to address potential issues:
- Limit the number of iterations to avoid endless loops.
- Handle error codes returned by ksz8_r_dyn_mac_table(), with
an exception for -ENXIO when no more dynamic entries are detected.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ksz8_r_dyn_mac_table() is not used outside the source file. Make it
static.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The FDB timestamps are not being utilized. This commit removes the
unused timestamp support from ksz8_r_dyn_mac_table() function.
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240403125039.3414824-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add StarFive JH8100 dwmac support.
The JH8100 dwmac shares the same driver code as the JH7110 dwmac
and has only one reset signal.
Please refer to below:
JH8100: reset-names = "stmmaceth";
JH7110: reset-names = "stmmaceth", "ahb";
JH7100: reset-names = "ahb";
Example usage of JH8100 in the device tree:
gmac0: ethernet@16030000 {
compatible = "starfive,jh8100-dwmac",
"starfive,jh7110-dwmac",
"snps,dwmac-5.20";
...
};
Signed-off-by: Tan Chun Hau <chunhau.tan@starfivetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240403100549.78719-2-chunhau.tan@starfivetech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Typing e.nl_msg.error when processing exception is a bit tedious
and counter-intuitive. Set a local .error member to the positive
value of the netlink level error.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When interfacing with the ethtool commands it's handy to
be able to use the names of the flags. Example:
ethnl.pause_get({"header": {"dev-index": cfg.ifindex,
"flags": {'stats'}}})
Note that not all commands accept all the flags,
but the meaning of the bits does not change command
to command.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240403023426.1762996-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I got multiple syzbot reports showing old bugs exposed
by BPF after commit 20f2505fb436 ("bpf: Try to avoid kzalloc
in cgroup/{s,g}etsockopt")
setsockopt() @optlen argument should be taken into account
before copying data.
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline]
BUG: KASAN: slab-out-of-bounds in do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline]
BUG: KASAN: slab-out-of-bounds in do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627
Read of size 96 at addr ffff88802cd73da0 by task syz-executor.4/7238
CPU: 1 PID: 7238 Comm: syz-executor.4 Not tainted 6.9.0-rc2-next-20240403-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105
copy_from_sockptr_offset include/linux/sockptr.h:49 [inline]
copy_from_sockptr include/linux/sockptr.h:55 [inline]
do_replace net/ipv4/netfilter/ip_tables.c:1111 [inline]
do_ipt_set_ctl+0x902/0x3dd0 net/ipv4/netfilter/ip_tables.c:1627
nf_setsockopt+0x295/0x2c0 net/netfilter/nf_sockopt.c:101
do_sock_setsockopt+0x3af/0x720 net/socket.c:2311
__sys_setsockopt+0x1ae/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x72/0x7a
RIP: 0033:0x7fd22067dde9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fd21f9ff0c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007fd2207abf80 RCX: 00007fd22067dde9
RDX: 0000000000000040 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007fd2206ca47a R08: 0000000000000001 R09: 0000000000000000
R10: 0000000020000880 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fd2207abf80 R15: 00007ffd2d0170d8
</TASK>
Allocated by task 7238:
kasan_save_stack mm/kasan/common.c:47 [inline]
kasan_save_track+0x3f/0x80 mm/kasan/common.c:68
poison_kmalloc_redzone mm/kasan/common.c:370 [inline]
__kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387
kasan_kmalloc include/linux/kasan.h:211 [inline]
__do_kmalloc_node mm/slub.c:4069 [inline]
__kmalloc_noprof+0x200/0x410 mm/slub.c:4082
kmalloc_noprof include/linux/slab.h:664 [inline]
__cgroup_bpf_run_filter_setsockopt+0xd47/0x1050 kernel/bpf/cgroup.c:1869
do_sock_setsockopt+0x6b4/0x720 net/socket.c:2293
__sys_setsockopt+0x1ae/0x250 net/socket.c:2334
__do_sys_setsockopt net/socket.c:2343 [inline]
__se_sys_setsockopt net/socket.c:2340 [inline]
__x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x72/0x7a
The buggy address belongs to the object at ffff88802cd73da0
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes inside of
allocated 1-byte region [ffff88802cd73da0, ffff88802cd73da1)
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802cd73020 pfn:0x2cd73
flags: 0xfff80000000000(node=0|zone=1|lastcpupid=0xfff)
page_type: 0xffffefff(slab)
raw: 00fff80000000000 ffff888015041280 dead000000000100 dead000000000122
raw: ffff88802cd73020 000000008080007f 00000001ffffefff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x12cc0(GFP_KERNEL|__GFP_NOWARN|__GFP_NORETRY), pid 5103, tgid 2119833701 (syz-executor.4), ts 5103, free_ts 70804600828
set_page_owner include/linux/page_owner.h:32 [inline]
post_alloc_hook+0x1f3/0x230 mm/page_alloc.c:1490
prep_new_page mm/page_alloc.c:1498 [inline]
get_page_from_freelist+0x2e7e/0x2f40 mm/page_alloc.c:3454
__alloc_pages_noprof+0x256/0x6c0 mm/page_alloc.c:4712
__alloc_pages_node_noprof include/linux/gfp.h:244 [inline]
alloc_pages_node_noprof include/linux/gfp.h:271 [inline]
alloc_slab_page+0x5f/0x120 mm/slub.c:2249
allocate_slab+0x5a/0x2e0 mm/slub.c:2412
new_slab mm/slub.c:2465 [inline]
___slab_alloc+0xcd1/0x14b0 mm/slub.c:3615
__slab_alloc+0x58/0xa0 mm/slub.c:3705
__slab_alloc_node mm/slub.c:3758 [inline]
slab_alloc_node mm/slub.c:3936 [inline]
__do_kmalloc_node mm/slub.c:4068 [inline]
kmalloc_node_track_caller_noprof+0x286/0x450 mm/slub.c:4089
kstrdup+0x3a/0x80 mm/util.c:62
device_rename+0xb5/0x1b0 drivers/base/core.c:4558
dev_change_name+0x275/0x860 net/core/dev.c:1232
do_setlink+0xa4b/0x41f0 net/core/rtnetlink.c:2864
__rtnl_newlink net/core/rtnetlink.c:3680 [inline]
rtnl_newlink+0x180b/0x20a0 net/core/rtnetlink.c:3727
rtnetlink_rcv_msg+0x89b/0x10d0 net/core/rtnetlink.c:6594
netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2559
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1361
page last free pid 5146 tgid 5146 stack trace:
reset_page_owner include/linux/page_owner.h:25 [inline]
free_pages_prepare mm/page_alloc.c:1110 [inline]
free_unref_page+0xd3c/0xec0 mm/page_alloc.c:2617
discard_slab mm/slub.c:2511 [inline]
__put_partials+0xeb/0x130 mm/slub.c:2980
put_cpu_partial+0x17c/0x250 mm/slub.c:3055
__slab_free+0x2ea/0x3d0 mm/slub.c:4254
qlink_free mm/kasan/quarantine.c:163 [inline]
qlist_free_all+0x9e/0x140 mm/kasan/quarantine.c:179
kasan_quarantine_reduce+0x14f/0x170 mm/kasan/quarantine.c:286
__kasan_slab_alloc+0x23/0x80 mm/kasan/common.c:322
kasan_slab_alloc include/linux/kasan.h:201 [inline]
slab_post_alloc_hook mm/slub.c:3888 [inline]
slab_alloc_node mm/slub.c:3948 [inline]
__do_kmalloc_node mm/slub.c:4068 [inline]
__kmalloc_node_noprof+0x1d7/0x450 mm/slub.c:4076
kmalloc_node_noprof include/linux/slab.h:681 [inline]
kvmalloc_node_noprof+0x72/0x190 mm/util.c:634
bucket_table_alloc lib/rhashtable.c:186 [inline]
rhashtable_rehash_alloc+0x9e/0x290 lib/rhashtable.c:367
rht_deferred_worker+0x4e1/0x2440 lib/rhashtable.c:427
process_one_work kernel/workqueue.c:3218 [inline]
process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3299
worker_thread+0x86d/0xd70 kernel/workqueue.c:3380
kthread+0x2f0/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243
Memory state around the buggy address:
ffff88802cd73c80: 07 fc fc fc 05 fc fc fc 05 fc fc fc fa fc fc fc
ffff88802cd73d00: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
>ffff88802cd73d80: fa fc fc fc 01 fc fc fc fa fc fc fc fa fc fc fc
^
ffff88802cd73e00: fa fc fc fc fa fc fc fc 05 fc fc fc 07 fc fc fc
ffff88802cd73e80: 07 fc fc fc 07 fc fc fc 07 fc fc fc 07 fc fc fc
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240404122051.2303764-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot found that tcf_skbmod_dump() was copying four bytes
from kernel stack to user space [1].
The issue here is that 'struct tc_skbmod' has a four bytes hole.
We need to clear the structure before filling fields.
[1]
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
instrument_copy_to_user include/linux/instrumented.h:114 [inline]
copy_to_user_iter lib/iov_iter.c:24 [inline]
iterate_ubuf include/linux/iov_iter.h:29 [inline]
iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
iterate_and_advance include/linux/iov_iter.h:271 [inline]
_copy_to_iter+0x366/0x2520 lib/iov_iter.c:185
copy_to_iter include/linux/uio.h:196 [inline]
simple_copy_to_iter net/core/datagram.c:532 [inline]
__skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420
skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546
skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline]
netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962
sock_recvmsg_nosec net/socket.c:1046 [inline]
sock_recvmsg+0x2c4/0x340 net/socket.c:1068
__sys_recvfrom+0x35a/0x5f0 net/socket.c:2242
__do_sys_recvfrom net/socket.c:2260 [inline]
__se_sys_recvfrom net/socket.c:2256 [inline]
__x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was stored to memory at:
pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253
netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317
netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351
nlmsg_unicast include/net/netlink.h:1144 [inline]
nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610
rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741
rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline]
tcf_add_notify net/sched/act_api.c:2048 [inline]
tcf_action_add net/sched/act_api.c:2071 [inline]
tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119
rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559
rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
____sys_sendmsg+0x877/0xb60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was stored to memory at:
__nla_put lib/nlattr.c:1041 [inline]
nla_put+0x1c6/0x230 lib/nlattr.c:1099
tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256
tcf_action_dump_old net/sched/act_api.c:1191 [inline]
tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227
tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251
tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628
tcf_add_notify_msg net/sched/act_api.c:2023 [inline]
tcf_add_notify net/sched/act_api.c:2042 [inline]
tcf_action_add net/sched/act_api.c:2071 [inline]
tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119
rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595
netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559
rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613
netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline]
netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361
netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
____sys_sendmsg+0x877/0xb60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Local variable opt created at:
tcf_skbmod_dump+0x9d/0xc20 net/sched/act_skbmod.c:244
tcf_action_dump_old net/sched/act_api.c:1191 [inline]
tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227
Bytes 188-191 of 248 are uninitialized
Memory access of size 248 starts at ffff888117697680
Data copied to user address 00007ffe56d855f0
Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240403130908.93421-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset is not executed from bind operation and
mac address is not read from the device registers or the devicetree at that
moment. Since the check to configure if the assigned mac address is random
or not for the interface, happens after the bind operation from
usbnet_probe, the interface keeps configured as random address, although the
address is correctly read and set during open operation (the only reset
now).
In order to keep only one reset for the device and to avoid the interface
always configured as random address, after reset, configure correctly the
suitable field from the driver, if the mac address is read successfully from
the device registers or the devicetree. Take into account if a locally
administered address (random) was previously stored.
cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240403132158.344838-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some chips may not allow changing default speed when dual rate
transceivers modules are used. Firmware on those chips will
indicate the same to the driver.
Add a warning message when speed change is not supported
because a dual rate transceiver is detected by the NIC.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-8-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This updated interface supports backing store APIs to
configure host FW trace buffers, updates transceivers ID
types, updates to TrueFlow features and other changes
for the basic L2 features.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-7-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
- Change the last arg to xdp_prepare_buff to true from false.
- Ensure that when XDP_PASS is returned the xdp->data_meta area
is copied to the skb->data area. Account for the meta data
size on skb allocation and do a pull after to move it to the
"reserved" zone.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-6-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change bnxt_rx_xdp() to take a pointer to xdp instead of stack
variable.
This is in prepartion for the XDP metadata patch change where
the BPF program can change the value of the xdp.meta_data.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-5-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Driver's Page Pool allocation code looks at the node local
to the PCIe device to determine where to allocate memory.
In scenarios where the core count per NUMA node is low (< default rings)
it makes sense to exhaust page pool allocations on
Node 0 first and then moving on to allocating page pools
for the remaining rings from Node 1.
With this patch, and the following configuration on the NIC
$ ethtool -L ens1f0np0 combined 16
(core count/node = 12, first 12 rings on node#0, last 4 rings node#1)
and traffic redirected to a ring on node#1 , we see a performance
improvement of ~20%
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-4-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable XPS on default during NIC open. The choice of
Tx queue is based on the CPU executing the thread that
submits the Tx request. The pool of Tx queues will be
spread evenly across both device-attached NUMA nodes(local)
and remote NUMA nodes.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-3-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of DPC, after issuing the hot reset, the
kernel waits for 100ms for the device to complete
the reset. However on some older chips, the firmware
may take up to 1 second to complete the reset, only
after which the driver can restart the card.
Introduce delay of 900ms to handle this scenario on
the older chipsets.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-2-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mtk_flow_entry_update_l2, the hwe->ib1 is read using READ_ONCE at the
beginning of the function, checked, and then re-read from hwe->ib1,
may void all guarantees of the checks. Reuse the value that was read by
READ_ONCE to ensure the consistency of the ib1 throughout the function.
Signed-off-by: linke li <lilinke99@qq.com>
Link: https://lore.kernel.org/r/tencent_C699E9540505523424F11A9BD3D21B86840A@qq.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The definition and declaration of sja1110_pcs_mdio_write_c45() don't have
parameters in the same order.
Knowing that sja1110_pcs_mdio_write_c45() is used as a function pointer
in 'sja1105_info' structure with .pcs_mdio_write_c45, and that we have:
int (*pcs_mdio_write_c45)(struct mii_bus *bus, int phy, int mmd,
int reg, u16 val);
it is likely that the definition is the one to change.
Found with cppcheck, funcArgOrderDifferent.
Fixes: ae271547bba6 ("net: dsa: sja1105: C45 only transactions for PCS")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/ff2a5af67361988b3581831f7bd1eddebfb4c48f.1712082763.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The error statistics should be updated each time the poll function is
called, even if the full RX work budget has been consumed. This prevents
the counts from becoming stuck when RX bandwidth usage is high.
This also ensures that error counters are not updated after we've
re-enabled interrupts as that could result in a race condition.
Also drop an unnecessary space.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240402145305.82148-2-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The TX queue should be serviced each time the poll function is called,
even if the full RX work budget has been consumed. This prevents
starvation of the TX queue when RX bandwidth usage is high.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240402145305.82148-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Hook unregistration is deferred to the commit phase, same occurs with
hook updates triggered by the table dormant flag. When both commands are
combined, this results in deleting a basechain while leaving its hook
still registered in the core.
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can
concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable().
And thhere is not any protection when iterate over nf_tables_flowtables
list in __nft_flowtable_type_get(). Therefore, there is pertential
data-race of nf_tables_flowtables list entry.
Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list
in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller
nft_flowtable_type_get() to protect the entire type query process.
Fixes: 3b49e2e94e6e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When dormant flag is toggled, hooks are disabled in the commit phase by
iterating over current chains in table (existing and new).
The following configuration allows for an inconsistent state:
add table x
add chain x y { type filter hook input priority 0; }
add table x { flags dormant; }
add chain x w { type filter hook input priority 1; }
which triggers the following warning when trying to unregister chain w
which is already unregistered.
[ 127.322252] WARNING: CPU: 7 PID: 1211 at net/netfilter/core.c:50 1 __nf_unregister_net_hook+0x21a/0x260
[...]
[ 127.322519] Call Trace:
[ 127.322521] <TASK>
[ 127.322524] ? __warn+0x9f/0x1a0
[ 127.322531] ? __nf_unregister_net_hook+0x21a/0x260
[ 127.322537] ? report_bug+0x1b1/0x1e0
[ 127.322545] ? handle_bug+0x3c/0x70
[ 127.322552] ? exc_invalid_op+0x17/0x40
[ 127.322556] ? asm_exc_invalid_op+0x1a/0x20
[ 127.322563] ? kasan_save_free_info+0x3b/0x60
[ 127.322570] ? __nf_unregister_net_hook+0x6a/0x260
[ 127.322577] ? __nf_unregister_net_hook+0x21a/0x260
[ 127.322583] ? __nf_unregister_net_hook+0x6a/0x260
[ 127.322590] ? __nf_tables_unregister_hook+0x8a/0xe0 [nf_tables]
[ 127.322655] nft_table_disable+0x75/0xf0 [nf_tables]
[ 127.322717] nf_tables_commit+0x2571/0x2620 [nf_tables]
Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Similar to 2c9f0293280e ("netfilter: nf_tables: flush pending destroy
work before netlink notifier") to address a race between exit_net and
the destroy workqueue.
The trace below shows an element to be released via destroy workqueue
while exit_net path (triggered via module removal) has already released
the set that is used in such transaction.
[ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465
[ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359
[ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[ 1360.547984] Call Trace:
[ 1360.547991] <TASK>
[ 1360.547998] dump_stack_lvl+0x53/0x70
[ 1360.548014] print_report+0xc4/0x610
[ 1360.548026] ? __virt_addr_valid+0xba/0x160
[ 1360.548040] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 1360.548054] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548176] kasan_report+0xae/0xe0
[ 1360.548189] ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548312] nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548447] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables]
[ 1360.548577] ? _raw_spin_unlock_irq+0x18/0x30
[ 1360.548591] process_one_work+0x2f1/0x670
[ 1360.548610] worker_thread+0x4d3/0x760
[ 1360.548627] ? __pfx_worker_thread+0x10/0x10
[ 1360.548640] kthread+0x16b/0x1b0
[ 1360.548653] ? __pfx_kthread+0x10/0x10
[ 1360.548665] ret_from_fork+0x2f/0x50
[ 1360.548679] ? __pfx_kthread+0x10/0x10
[ 1360.548690] ret_from_fork_asm+0x1a/0x30
[ 1360.548707] </TASK>
[ 1360.548719] Allocated by task 192061:
[ 1360.548726] kasan_save_stack+0x20/0x40
[ 1360.548739] kasan_save_track+0x14/0x30
[ 1360.548750] __kasan_kmalloc+0x8f/0xa0
[ 1360.548760] __kmalloc_node+0x1f1/0x450
[ 1360.548771] nf_tables_newset+0x10c7/0x1b50 [nf_tables]
[ 1360.548883] nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink]
[ 1360.548909] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink]
[ 1360.548927] netlink_unicast+0x367/0x4f0
[ 1360.548935] netlink_sendmsg+0x34b/0x610
[ 1360.548944] ____sys_sendmsg+0x4d4/0x510
[ 1360.548953] ___sys_sendmsg+0xc9/0x120
[ 1360.548961] __sys_sendmsg+0xbe/0x140
[ 1360.548971] do_syscall_64+0x55/0x120
[ 1360.548982] entry_SYSCALL_64_after_hwframe+0x55/0x5d
[ 1360.548994] Freed by task 192222:
[ 1360.548999] kasan_save_stack+0x20/0x40
[ 1360.549009] kasan_save_track+0x14/0x30
[ 1360.549019] kasan_save_free_info+0x3b/0x60
[ 1360.549028] poison_slab_object+0x100/0x180
[ 1360.549036] __kasan_slab_free+0x14/0x30
[ 1360.549042] kfree+0xb6/0x260
[ 1360.549049] __nft_release_table+0x473/0x6a0 [nf_tables]
[ 1360.549131] nf_tables_exit_net+0x170/0x240 [nf_tables]
[ 1360.549221] ops_exit_list+0x50/0xa0
[ 1360.549229] free_exit_list+0x101/0x140
[ 1360.549236] unregister_pernet_operations+0x107/0x160
[ 1360.549245] unregister_pernet_subsys+0x1c/0x30
[ 1360.549254] nf_tables_module_exit+0x43/0x80 [nf_tables]
[ 1360.549345] __do_sys_delete_module+0x253/0x370
[ 1360.549352] do_syscall_64+0x55/0x120
[ 1360.549360] entry_SYSCALL_64_after_hwframe+0x55/0x5d
(gdb) list *__nft_release_table+0x473
0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354).
11349 list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) {
11350 list_del(&flowtable->list);
11351 nft_use_dec(&table->use);
11352 nf_tables_flowtable_destroy(flowtable);
11353 }
11354 list_for_each_entry_safe(set, ns, &table->sets, list) {
11355 list_del(&set->list);
11356 nft_use_dec(&table->use);
11357 if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT))
11358 nft_map_deactivate(&ctx, set);
(gdb)
[ 1360.549372] Last potentially related work creation:
[ 1360.549376] kasan_save_stack+0x20/0x40
[ 1360.549384] __kasan_record_aux_stack+0x9b/0xb0
[ 1360.549392] __queue_work+0x3fb/0x780
[ 1360.549399] queue_work_on+0x4f/0x60
[ 1360.549407] nft_rhash_remove+0x33b/0x340 [nf_tables]
[ 1360.549516] nf_tables_commit+0x1c6a/0x2620 [nf_tables]
[ 1360.549625] nfnetlink_rcv_batch+0x728/0xdc0 [nfnetlink]
[ 1360.549647] nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink]
[ 1360.549671] netlink_unicast+0x367/0x4f0
[ 1360.549680] netlink_sendmsg+0x34b/0x610
[ 1360.549690] ____sys_sendmsg+0x4d4/0x510
[ 1360.549697] ___sys_sendmsg+0xc9/0x120
[ 1360.549706] __sys_sendmsg+0xbe/0x140
[ 1360.549715] do_syscall_64+0x55/0x120
[ 1360.549725] entry_SYSCALL_64_after_hwframe+0x55/0x5d
Fixes: 0935d5588400 ("netfilter: nf_tables: asynchronous release")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The commit mutex should not be released during the critical section
between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC
worker could collect expired objects and get the released commit lock
within the same GC sequence.
nf_tables_module_autoload() temporarily releases the mutex to load
module dependencies, then it goes back to replay the transaction again.
Move it at the end of the abort phase after nft_gc_seq_end() is called.
Cc: stable@vger.kernel.org
Fixes: 720344340fb9 ("netfilter: nf_tables: GC transaction race with abort path")
Reported-by: Kuan-Ting Chen <hexrabbit@devco.re>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Unlike early commit path stage which triggers a call to abort, an
explicit release of the batch is required on abort, otherwise mutex is
released and commit_list remains in place.
Add WARN_ON_ONCE to ensure commit_list is empty from the abort path
before releasing the mutex.
After this patch, commit_list is always assumed to be empty before
grabbing the mutex, therefore
03c1f1ef1584 ("netfilter: Cleanup nft_net->module_list from nf_tables_exit_net()")
only needs to release the pending modules for registration.
Cc: stable@vger.kernel.org
Fixes: c0391b6ab810 ("netfilter: nf_tables: missing validation from the abort path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This reverts commit 9ab4ad295622a3481818856762471c1f8c830e18.
I went out of coffee and applied it to the wrong tree. Blame on me.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As of now, tg3_power_down_prepare always ends with success, but
the error handling code from former tg3_set_power_state call is still here.
This code became unreachable in commit c866b7eac073 ("tg3: Do not use
legacy PCI power management").
Remove (now unreachable) error handling code for simplification and change
tg3_power_down_prepare to a void function as its result is no more checked.
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240401191418.361747-1-kiryushin@ancud.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As of now, tg3_power_down_prepare always ends with success, but
the error handling code from former tg3_set_power_state call is still here.
This code became unreachable in commit c866b7eac073 ("tg3: Do not use
legacy PCI power management").
Remove (now unreachable) error handling code for simplification and change
tg3_power_down_prepare to a void function as its result is no more checked.
Signed-off-by: Nikita Kiryushin <kiryushin@ancud.ru>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240401191418.361747-1-kiryushin@ancud.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, for each completion, we check the number of descriptor queue
and take it via mlxsw_pci_{sdq,rdq}_get(). This is inefficient, the
DQ should be the same for all the completions in CQ, as each CQ handles
only one DQ - SDQ or RDQ. This mapping is handled as part of DQ
initialization via mlxsw_cmd_mbox_sw2hw_dq_cq_set().
Instead, as part of DQ initialization, set DQ pointer in the appropriate
CQ structure. When we handle completions, warn in case that the DQ number
that we expect is different from the number we get in the CQE. Call
WARN_ON_ONCE() only after checking the value, to avoid calling this method
for each completion.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/a5b2559cd6d532c120f3194f89a1e257110318f1.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, for each interrupt we call mlxsw_pci_cq_count() to determine the
number of CQs. This call makes additional two function's calls. This can
be removed by storing this value as part of structure 'mlxsw_pci', as we
already do for number of SDQs. Remove the function and
__mlxsw_pci_queue_count() which is now not used and store the value
instead.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f08ad113e8160678f3c8d401382a696c6c7f44c7.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The number of SDQs is stored as part of 'mlxsw_pci' structure. In some
cases, the driver uses this value and in some cases it calls
mlxsw_pci_sdq_count() to get the value. Align the code to use the
stored value. This simplifies the code and makes it clearer that the
value is always the same. Rename 'mlxsw_pci->num_sdq_cqs' to
'mlxsw_pci->num_sdqs' as now it is used not only in CQ context.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/0c8788506d9af35d589dbf64be35a508fd63d681.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Completion queues are used for completions of RDQ or SDQ. Each
completion queue is used for one DQ. The first CQs are used for SDQs and
the rest are used for RDQs.
Currently, for each CQE (completion queue element), we check 'sr' value
(send/receive) to know if it is completion of RDQ or SDQ. Actually, we
do not really have to check it, as according to the queue number we know
if it handles completions of Rx or Tx.
Break the tasklet into two - one for Rx (RDQ) and one for Tx (SDQ). Then,
setup the appropriate tasklet for each queue as part of queue
initialization. Use 'sr' value for unlikely case that we get completion
with type that we do not expect. Call WARN_ON_ONCE() only after checking
the value, to avoid calling this method for each completion.
A next patch set will use NAPI to handle events, then we will have a
separate poll method for Rx and Tx. This change is a preparation for
NAPI usage.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/50fbc366f8de54cb5dc72a7c4f394333ef71f1d0.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function will be broken into several functions later. As preparation,
reorder variables to reverse xmas tree.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/7170a8f4429ecb5a539b0374c621697778ff8363.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The previous patch changed the code to do not handle command interface
from event queue. With this change the wait queue is not used anymore.
Remove it and 'wait_done' variable.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f3af6a5a9dabd97d2920cefe475c6aa57767f504.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device supports two event queues. EQ0 is used for command interface
completion events. EQ1 is used for completion events of RDQ or SDQ.
Currently, for each EQE (event queue element), we check the queue number
and handle accordingly. More than that, for each interrupt we schedule
tasklets for both EQs. This is really ineffective, especially because of
the fact that EQ0 is used only as part of driver init/fini, when EMADs are
not available. There is no point to schedule the tasklet for it and check
each EQE.
A previous patch changed the code to poll command interface for each use of
it. It means that now there is no real reason to use EQ0, as we poll the
command interface.
Initialize only one event queue and use it as EQ1 (this is determined by
queue number). Then, for each interrupt we can schedule the tasklet only
for one queue and we do not have to check the queue number. This
simplifies the code and should improve performance. Note that polling
command interface is ok as we use it only as part of driver init/fini.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/23d764f5c032e4c363b98590b746a4b32d2bf900.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently we use MLXSW_PCI_EQS_COUNT event queues. A next patch will
change the driver to initialize only EQ1, as EQ0 is not required anymore
when we poll command interface.
Rename the macro to MLXSW_PCI_EQS_MAX as later we will not initialize
the maximum supported EQs, this value represents the maximum and a new
macro will be added to represent the actual used queues.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/b08df430b62f23ca1aa3aaa257896d2d95aa7691.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Command interface is used for configuring and querying FW when EMADs are
not available. During the time that the driver sets up the asynchronous
queues, it polls the command interface for getting completions. Then,
there is a short period when asynchronous queues work, but EMADs are not
available (marked in the code as nopoll = true). During this time, we
send commands via command interface, but we do not poll it, as we can get
an interrupt for the completion. Completions of command interface are
received from HW in EQ0 (event queue 0).
The usage of EQ0 instead of polling is done only 4 times during
initialization and one time during tear down, but it makes an overhead
during lifetime of the driver. For each interrupt, we have to check if
we get events in EQ0 or EQ1 and handle them. This is really ineffective,
especially because of the fact that EQ0 is used only as part of driver
init/fini.
Instead, we can poll command interface for each call of cmd_exec(). It
means that when we send a command via command interface (as EMADs are
not available), we will poll it, regardless of availability of the
asynchronous queues. This will allow us to configure later only EQ1 and
simplify the flow.
Remove 'nopoll' indication and change mlxsw_pci_cmd_exec() to poll till
answer/timeout regardless of queues' state. For now, completions are
handled also by EQ0, but it will be removed in next patch. Additional
cleanups will be added in next patches.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/e674c70380ceda953e0e45a77334c5d22e69938f.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function will be used later only for EQ1. As preparation, reorder
variables to reverse xmas tree and return earlier when it is possible, to
simplify the code.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/2412d6c135b2a6aedb4484f5d8baab3aecd7b9ae.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The structure 'mlxsw_pci_queue' stores several counters which were consumed
via debugfs. Since commit 9a32562becd9 ("mlxsw: Remove debugfs interface"),
these counters are not used. Remove them. This makes the 'union u' and
'struct eq' redundant. Maintain 'struct cq' as it will be extended later.
Replace increasing 'q->u.eq.ev_other_count' with WARN_ON_ONCE(), as it is
used in an unreasonable case of receiving event in EQ which is not EQ0 or
EQ1. When the queues are initialized, we check number of event queues and
fail with the print "Unsupported number of queues" in case that the driver
tries to initialize more than two queues.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/ee9e658800aa0390e08342100bc27daff4c176c0.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, as part of mlxsw_pci_cq_tasklet(), we check if any item
was handled, and only in such case we arm doorbell. This is unlikely case,
as we schedule tasklet only for CQs that we get an event for them, which
means that they contain completions to handle. Remove this check, which
is supposed to be true always, and even if it is false, it is not a mistake
to ring the doorbell. We can warn on such case, but it is not really worth
to add a check which will be run for each CQ handling when we do not expect
to reach it and it does not point to logic error that should be handled.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f8efa481bfe7bebb9f93bb803f44ab7da77f53e6.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the structure 'mlxsw_pci_queue_ops' holds a pointer to the
callback function of tasklet. This is used only for EQ and CQ. mlxsw
driver will use NAPI in a following patch set, so CQ will not use tasklet
anymore. As preparation, remove this pointer from the shared operation
structure and setup the tasklet as part of queue initialization.
For now, setup tasklet for EQ and CQ. Later, CQ code will be changed.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/a326cae5fc1ad085a1a063c004983de6fe389414.1712062203.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Cosmin Ratiu
Michael Chan
Oleksij Rempel
Tan Chun Hau
Jakub Kicinski
Eric Dumazet
Jose Ignacio Tornos Martinez
Sreekanth Reddy
Pavan Chebbi
Somnath Kotur
Vikas Gupta
linke li
Christophe JAILLET
Paul Barker
Pablo Neira Ayuso
Ziyang Xuan
Paolo Abeni
Nikita Kiryushin
Amit Cohen