aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-09-25drm/nouveau/gk20a: stop setting DMA_ATTR_NON_CONSISTENTChristoph Hellwig1-2/+1
DMA_ATTR_NON_CONSISTENT is a no-op except on PA-RISC and a few MIPS configs, so don't set it in this ARM specific driver part. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-25drm/exynos: stop setting DMA_ATTR_NON_CONSISTENTChristoph Hellwig1-2/+0
DMA_ATTR_NON_CONSISTENT is a no-op except on PA-RISC and a few MIPS configs, so don't set it in this ARM specific driver. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-25mm: turn alloc_pages into an inline functionChristoph Hellwig1-2/+4
To prevent a compiler error when a method call alloc_pages is added (which I plan to for the dma_map_ops). Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-25ARM/omap1: switch to use dma_direct_set_offset for lbus DMA offsetsChristoph Hellwig3-49/+22
Switch the omap1510 platform ohci device to use dma_direct_set_offset to set the DMA offset instead of using direct hooks into the DMA mapping code and remove the now unused hooks. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com>
2020-09-25dma-mapping: better document dma_addr_t and DMA_MAPPING_ERRORChristoph Hellwig1-6/+10
Move the comment documenting dma_addr_t away from the dma_map_ops definition which isn't very related to it, and toward DMA_MAPPING_ERROR, which is somewhat related. Add a little blurb about DMA_MAPPING_ERROR as well. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-25dma-mapping: move valid_dma_direction to dma-direction.hChristoph Hellwig2-8/+7
Move the valid_dma_direction helper to a more suitable header, and clean it up to use the proper enum as well as removing pointless braces. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-25dma-mapping: remove DMA_MASK_NONEChristoph Hellwig2-3/+1
This value is only used by a PCMCIA driver and not very useful. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Dominik Brodowski <linux@dominikbrodwski.net>
2020-09-24mm: fix misplaced unlock_page in do_wp_page()Linus Torvalds1-1/+1
Commit 09854ba94c6a ("mm: do_wp_page() simplification") reorganized all the code around the page re-use vs copy, but in the process also moved the final unlock_page() around to after the wp_page_reuse() call. That normally doesn't matter - but it means that the unlock_page() is now done after releasing the page table lock. Again, not a big deal, you'd think. But it turns out that it's very wrong indeed, because once we've released the page table lock, we've basically lost our only reference to the page - the page tables - and it could now be free'd at any time. We do hold the mmap_sem, so no actual unmap() can happen, but madvise can come in and a MADV_DONTNEED will zap the page range - and free the page. So now the page may be free'd just as we're unlocking it, which in turn will usually trigger a "Bad page state" error in the freeing path. To make matters more confusing, by the time the debug code prints out the page state, the unlock has typically completed and everything looks fine again. This all doesn't happen in any normal situations, but it does trigger with the dirtyc0w_child LTP test. And it seems to trigger much more easily (but not expclusively) on s390 than elsewhere, probably because s390 doesn't do the "batch pages up for freeing after the TLB flush" that gives the unlock_page() more time to complete and makes the race harder to hit. Fixes: 09854ba94c6a ("mm: do_wp_page() simplification") Link: https://lore.kernel.org/lkml/a46e9bbef2ed4e17778f5615e818526ef848d791.camel@redhat.com/ Link: https://lore.kernel.org/linux-mm/c41149a8-211e-390b-af1d-d5eee690fecb@linux.alibaba.com/ Reported-by: Qian Cai <cai@redhat.com> Reported-by: Alex Shi <alex.shi@linux.alibaba.com> Bisected-and-analyzed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Tested-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-23mm: move the copy_one_pte() pte_present check into the callerLinus Torvalds1-12/+12
This completes the split of the non-present and present pte cases by moving the check for the source pte being present into the single caller, which also means that we clearly separate out the very different return value case for a non-present pte. The present pte case currently always succeeds. This is a pure code re-organization with no semantic change: the intent is to make it much easier to add a new return case to the present pte case for when we do early COW at page table copy time. This was split out from the previous commit simply to make it easy to visually see that there were no semantic changes from this code re-organization. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-23mm: split out the non-present case from copy_one_pte()Linus Torvalds1-67/+79
This is a purely mechanical split of the copy_one_pte() function. It's not immediately obvious when looking at the diff because of the indentation change, but the way to see what is going on in this commit is to use the "-w" flag to not show pure whitespace changes, and you see how the first part of copy_one_pte() is simply lifted out into a separate function. And since the non-present case is marked unlikely, don't make the new function be inlined. Not that gcc really seems to care, since it looks like it will inline it anyway due to the whole "single callsite for static function" logic. In fact, code generation with the function split is almost identical to before. But not marking it inline is the right thing to do. This is pure prep-work and cleanup for subsequent changes. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-09-22dm crypt: document encrypted keyring key optionMilan Broz1-1/+1
Commit 27f5411a718c4 ("dm crypt: support using encrypted keys") introduced support for encrypted keyring type. Fix documentation in admin guide to mention this type. Fixes: 27f5411a718c4 ("dm crypt: support using encrypted keys") Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-22dm crypt: document new no_workqueue flagsMilan Broz1-0/+8
Commit 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") introduced new dm-crypt 'no_read_workqueue' and 'no_write_workqueue' flags. Add documentation to admin guide for them. Fixes: 39d42fa96ba1 ("dm crypt: add flags to optionally bypass kcryptd workqueues") Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-22Revert "ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control"Kai-Heng Feng1-1/+0
This reverts commit 34dedd2a83b241ba6aeb290260313c65dc58660e. According to Realtek, volume FU works for line-in. I can confirm volume control works after device firmware is updated. Fixes: 34dedd2a83b2 ("ALSA: usb-audio: Disable Lenovo P620 Rear line-in volume control") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20200915103925.12777-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2020-09-22btrfs: fix put of uninitialized kobject after seed device deleteAnand Jain1-6/+10
The following test case leads to NULL kobject free error: mount seed /mnt add sprout to /mnt umount /mnt mount sprout to /mnt delete seed kobject: '(null)' (00000000dd2b87e4): is not initialized, yet kobject_put() is being called. WARNING: CPU: 1 PID: 15784 at lib/kobject.c:736 kobject_put+0x80/0x350 RIP: 0010:kobject_put+0x80/0x350 :: Call Trace: btrfs_sysfs_remove_devices_dir+0x6e/0x160 [btrfs] btrfs_rm_device.cold+0xa8/0x298 [btrfs] btrfs_ioctl+0x206c/0x22a0 [btrfs] ksys_ioctl+0xe2/0x140 __x64_sys_ioctl+0x1e/0x29 do_syscall_64+0x96/0x150 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f4047c6288b :: This is because, at the end of the seed device-delete, we try to remove the seed's devid sysfs entry. But for the seed devices under the sprout fs, we don't initialize the devid kobject yet. So add a kobject state check, which takes care of the bug. Fixes: 668e48af7a94 ("btrfs: sysfs, add devid/dev_state kobject and device attributes") CC: stable@vger.kernel.org # 5.6+ Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-09-22media: dt-bindings: media: imx274: Convert to json-schemaJacopo Mondi3-39/+77
Convert the imx274 bindings document to json-schema and update the MAINTAINERS file accordingly. Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-21tools/bootconfig: Add testcase for tailing spaceMasami Hiramatsu1-0/+13
Add testcases for removing/keeping tailing space in the value. Link: https://lkml.kernel.org/r/160068151151.1088739.3469541807296024227.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-21tools/bootconfig: Add testcases for repeated key with braceMasami Hiramatsu1-0/+12
Add a testcase for repeated key with brace parsing issue. Link: https://lkml.kernel.org/r/160068150176.1088739.409481347784771987.stgit@devnote2 Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-21lib/bootconfig: Fix to remove tailing spaces after valueMasami Hiramatsu1-1/+1
Fix to remove tailing spaces after value. If there is a space after value, the bootconfig failed to remove it because it applies strim() before replacing the delimiter with null. For example, foo = var # comment was parsed as below. foo="var " but user will expect foo="var" This fixes it by applying strim() after removing the delimiter. Link: https://lkml.kernel.org/r/160068149134.1088739.8868306567670058853.stgit@devnote2 Fixes: 76db5a27a827 ("bootconfig: Add Extra Boot Config support") Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-21lib/bootconfig: Fix a bug of breaking existing tree nodesMasami Hiramatsu1-13/+23
Fix a bug of breaking existing tree nodes by parsing the second and subsequent braces. Since the bootconfig parser uses the node.next field as a flag of current parent node, but this will break the existing tree if the same key node is specified again in the bootconfig. For example, the following bootconfig should be foo.buz and bar. foo bar foo { buz } However, when parsing the brace "{", it breaks foo->bar link by marking open-brace node. So the bootconfig unlinks bar from the bootconfig internal tree. This introduces a stack outside of the tree and record the last open-brace on the stack instead of using node.next field. Link: https://lkml.kernel.org/r/160068148267.1088739.8264704338030168660.stgit@devnote2 Fixes: 76db5a27a827 ("bootconfig: Add Extra Boot Config support") Cc: Ingo Molnar <mingo@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-09-21net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesVladimir Oltean1-8/+8
The IS2 IP4_TCP_UDP key offsets do not correspond to the VSC7514 datasheet. Whether they work or not is unknown to me. On VSC9959 and VSC9953, with the same mistake and same discrepancy from the documentation, tc-flower src_port and dst_port rules did not work, so I am assuming the same is true here. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesVladimir Oltean1-8/+8
Since these were copied from the Felix VCAP IS2 code, and only the offsets were adjusted, the order of the bit fields is still wrong. Fix it. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entriesXiaoliang Yang1-8/+8
Some of the IS2 IP4_TCP_UDP keys are not correct, like L4_DPORT, L4_SPORT and other L4 keys. This prevents offloaded tc-flower rules from matching on src_port and dst_port for TCP and UDP packets. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21inet_diag: validate INET_DIAG_REQ_PROTOCOL attributeEric Dumazet1-5/+15
User space could send an invalid INET_DIAG_REQ_PROTOCOL attribute as caught by syzbot. BUG: KMSAN: uninit-value in inet_diag_lock_handler net/ipv4/inet_diag.c:55 [inline] BUG: KMSAN: uninit-value in __inet_diag_dump+0x58c/0x720 net/ipv4/inet_diag.c:1147 CPU: 0 PID: 8505 Comm: syz-executor174 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:122 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:219 inet_diag_lock_handler net/ipv4/inet_diag.c:55 [inline] __inet_diag_dump+0x58c/0x720 net/ipv4/inet_diag.c:1147 inet_diag_dump_compat+0x2a5/0x380 net/ipv4/inet_diag.c:1254 netlink_dump+0xb73/0x1cb0 net/netlink/af_netlink.c:2246 __netlink_dump_start+0xcf2/0xea0 net/netlink/af_netlink.c:2354 netlink_dump_start include/linux/netlink.h:246 [inline] inet_diag_rcv_msg_compat+0x5da/0x6c0 net/ipv4/inet_diag.c:1288 sock_diag_rcv_msg+0x24f/0x620 net/core/sock_diag.c:256 netlink_rcv_skb+0x6d7/0x7e0 net/netlink/af_netlink.c:2470 sock_diag_rcv+0x63/0x80 net/core/sock_diag.c:275 netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline] netlink_unicast+0x11c8/0x1490 net/netlink/af_netlink.c:1330 netlink_sendmsg+0x173a/0x1840 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] ____sys_sendmsg+0xc82/0x1240 net/socket.c:2353 ___sys_sendmsg net/socket.c:2407 [inline] __sys_sendmsg+0x6d1/0x820 net/socket.c:2440 __do_sys_sendmsg net/socket.c:2449 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2447 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x441389 Code: e8 fc ab 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b 09 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff3b02ce98 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441389 RDX: 0000000000000000 RSI: 0000000020001500 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 0000000000000004 R11: 0000000000000246 R12: 0000000000402130 R13: 00000000004021c0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:143 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:126 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:80 slab_alloc_node mm/slub.c:2907 [inline] __kmalloc_node_track_caller+0x9aa/0x12f0 mm/slub.c:4511 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x35f/0xb30 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1094 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1176 [inline] netlink_sendmsg+0xdb9/0x1840 net/netlink/af_netlink.c:1894 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg net/socket.c:671 [inline] ____sys_sendmsg+0xc82/0x1240 net/socket.c:2353 ___sys_sendmsg net/socket.c:2407 [inline] __sys_sendmsg+0x6d1/0x820 net/socket.c:2440 __do_sys_sendmsg net/socket.c:2449 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2447 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2447 do_syscall_64+0x9f/0x140 arch/x86/entry/common.c:48 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 3f935c75eb52 ("inet_diag: support for wider protocol numbers") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Christoph Paasch <cpaasch@apple.com> Cc: Mat Martineau <mathew.j.martineau@linux.intel.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCUVladimir Oltean1-10/+17
When calling the RCU brother of br_vlan_get_pvid(), lockdep warns: ============================= WARNING: suspicious RCU usage 5.9.0-rc3-01631-g13c17acb8e38-dirty #814 Not tainted ----------------------------- net/bridge/br_private.h:1054 suspicious rcu_dereference_protected() usage! Call trace: lockdep_rcu_suspicious+0xd4/0xf8 __br_vlan_get_pvid+0xc0/0x100 br_vlan_get_pvid_rcu+0x78/0x108 The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group() which calls rtnl_dereference() instead of rcu_dereference(). In turn, rtnl_dereference() calls rcu_dereference_protected() which assumes operation under an RCU write-side critical section, which obviously is not the case here. So, when the incorrect primitive is used to access the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may cause various unexpected problems. I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot share the same implementation. So fix the bug by splitting the 2 functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups under proper locking annotations. Fixes: 7582f5b70f9a ("bridge: add br_vlan_get_pvid_rcu()") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net: Update MAINTAINERS for MediaTek switch driverSean Wang1-0/+1
Update maintainers for MediaTek switch driver with Landen Chao who is familiar with MediaTek MT753x switch devices and will help maintenance from the vendor side. Cc: Steven Liu <steven.liu@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21net/mlx5e: mlx5e_fec_in_caps() returns a booleanSaeed Mahameed1-5/+2
Returning errno is a bug, fix that. Also fixes smatch warnings: drivers/net/ethernet/mellanox/mlx5/core/en/port.c:453 mlx5e_fec_in_caps() warn: signedness bug returning '(-95)' Fixes: 2132b71f78d2 ("net/mlx5e: Advertise globaly supported FEC modes") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com>
2020-09-21net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlockSaeed Mahameed1-15/+10
The spinlock only needed when accessing the channel's icosq, grab the lock after the buf allocation in resync_post_get_progress_params() to avoid kzalloc(GFP_KERNEL) in atomic context. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Reported-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Fix leak on resync error flowSaeed Mahameed1-2/+6
Resync progress params buffer and dma weren't released on error, Add missing error unwinding for resync_post_get_progress_params(). Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Add missing dma_unmap in RX resyncSaeed Mahameed1-3/+5
Progress params dma address is never unmapped, unmap it when completion handling is over. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2020-09-21net/mlx5e: kTLS, Fix napi sync and possible use-after-freeTariq Toukan1-1/+1
Using synchronize_rcu() is sufficient to wait until running NAPI quits. See similar upstream fix with detailed explanation: ("net/mlx5e: Use synchronize_rcu to sync with NAPI") This change also fixes a possible use-after-free as the NAPI might be already released at this stage. Fixes: 0419d8c9d8f8 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: TLS, Do not expose FPGA TLS counter if not supportedTariq Toukan1-4/+8
The set of TLS TX global SW counters in mlx5e_tls_sw_stats_desc is updated from all rings by using atomic ops. This set of stats is used only in the FPGA TLS use case, not in the Connect-X TLS one, where regular per-ring counters are used. Do not expose them in the Connect-X use case, as this would cause counter duplication. For example, tx_tls_drop_no_sync_data would appear twice in the ethtool stats. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-21net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()Alaa Hleihel6-15/+17
The cited commit started to reuse function mlx5e_update_ndo_stats() for the representors as well. However, the function is hard-coded to work on mlx5e_nic_stats_grps only. Due to this issue, the representors statistics were not updated in the output of "ip -s". Fix it to work with the correct group by extracting it from the caller's profile. Also, while at it and since this function became generic, move it to en_stats.c and rename it accordingly. Fixes: 8a236b15144b ("net/mlx5e: Convert rep stats to mlx5e_stats_grp-based infra") Signed-off-by: Alaa Hleihel <alaa@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Fix multicast counter not up-to-date in "ip -s"Ron Diskin4-7/+12
Currently the FW does not generate events for counters other than error counters. Unlike ".get_ethtool_stats", ".ndo_get_stats64" (which ip -s uses) might run in atomic context, while the FW interface is non atomic. Thus, 'ip' is not allowed to issue FW commands, so it will only display cached counters in the driver. Add a SW counter (mcast_packets) in the driver to count rx multicast packets. The counter also counts broadcast packets, as we consider it a special case of multicast. Use the counter value when calling "ip -s"/"ifconfig". Fixes: f62b8bb8f2d3 ("net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality") Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Fix endianness when calculating pedit mask first bitMaor Dickman1-13/+21
The field mask value is provided in network byte order and has to be converted to host byte order before calculating pedit mask first bit. Fixes: 88f30bbcbaaa ("net/mlx5e: Bit sized fields rewrite support") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-21net/mlx5e: Enable adding peer miss rules only if merged eswitch is supportedMaor Dickman1-24/+28
The cited commit creates peer miss group during switchdev mode initialization in order to handle miss packets correctly while in VF LAG mode. This is done regardless of FW support of such groups which could cause rules setups failure later on. Fix by adding FW capability check before creating peer groups/rule. Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules") Signed-off-by: Maor Dickman <maord@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: CT: Fix freeing ct_label mappingRoi Dayan3-17/+36
Add missing mapping remove call when removing ct rule, as the mapping was allocated when ct rule was adding with ct_label. Also there is a missing mapping remove call in error flow. Fixes: 54b154ecfb8c ("net/mlx5e: CT: Map 128 bits labels to 32 bit map ID") Signed-off-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Eli Britstein <elibr@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Fix memory leak of tunnel info when rule under multipath not readyJianbo Liu1-4/+1
When deleting vxlan flow rule under multipath, tun_info in parse_attr is not freed when the rule is not ready. Fixes: ef06c9ee8933 ("net/mlx5e: Allow one failure when offloading tc encap rules under multipath") Signed-off-by: Jianbo Liu <jianbol@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Use synchronize_rcu to sync with NAPIMaxim Mikityanskiy5-36/+22
As described in the previous commit, napi_synchronize doesn't quite fit the purpose when we just need to wait until the currently running NAPI quits. Its implementation waits until NAPI is not running by polling and waiting for 1ms in between. In cases where we need to deactivate one queue (e.g., recovery flows) or where we deactivate them one-by-one (deactivate channel flow), we may get stuck in napi_synchronize forever if other queues keep NAPI active, causing a soft lockup. Depending on kernel configuration (CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC), it may result in a kernel panic. To fix the issue, use synchronize_rcu to wait for NAPI to quit, and wrap the whole NAPI in rcu_read_lock. Fixes: acc6c5953af1 ("net/mlx5e: Split open/close channels to stages") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5e: Use RCU to protect rq->xdp_progMaxim Mikityanskiy3-30/+27
Currently, the RQs are temporarily deactivated while hot-replacing the XDP program, and napi_synchronize is used to make sure rq->xdp_prog is not in use. However, napi_synchronize is not ideal: instead of waiting till the end of a NAPI cycle, it polls and waits until NAPI is not running, sleeping for 1ms between the periodic checks. Under heavy workloads, this loop will never end, which may even lead to a kernel panic if the kernel detects the hangup. Such workloads include XSK TX and possibly also heavy RX (XSK or normal). The fix is inspired by commit 326fe02d1ed6 ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"). As mlx5e_xdp_handle is already protected by rcu_read_lock, and bpf_prog_put uses call_rcu to free the program, there is no need for additional synchronization if proper RCU functions are used to access the pointer. This patch converts all accesses to rq->xdp_prog to use RCU functions. Fixes: 86994156c736 ("net/mlx5e: XDP fast RX drop bpf programs support") Fixes: db05815b36cb ("net/mlx5e: Add XSK zero-copy support") Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-09-21net/mlx5: Fix FTE cleanupMaor Gottlieb1-4/+4
Currently, when an FTE is allocated, its refcount is decreased to 0 with the purpose it will not be a stand alone steering object and every rule (destination) of the FTE would increase the refcount. When mlx5_cleanup_fs is called while not all rules were deleted by the steering users, it hit refcount underflow on the FTE once clean_tree calls to tree_remove_node after the deleted rules already decreased the refcount to 0. FTE is no longer destroyed implicitly when the last rule (destination) is deleted. mlx5_del_flow_rules avoids it by increasing the refcount on the FTE and destroy it explicitly after all rules were deleted. So we can avoid the refcount underflow by making FTE as stand alone object. In addition need to set del_hw_func to FTE so the HW object will be destroyed when the FTE is deleted from the cleanup_tree flow. refcount_t: underflow; use-after-free. WARNING: CPU: 2 PID: 15715 at lib/refcount.c:28 refcount_warn_saturate+0xd9/0xe0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: tree_put_node+0xf2/0x140 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x5f/0xf0 [mlx5_core] clean_tree+0x4e/0xf0 [mlx5_core] clean_tree+0x5f/0xf0 [mlx5_core] mlx5_cleanup_fs+0x26/0x270 [mlx5_core] mlx5_unload+0x2e/0xa0 [mlx5_core] mlx5_unload_one+0x51/0x120 [mlx5_core] mlx5_devlink_reload_down+0x51/0x90 [mlx5_core] devlink_reload+0x39/0x120 ? devlink_nl_cmd_reload+0x43/0x220 genl_rcv_msg+0x1e4/0x420 ? genl_family_rcv_msg_attrs_parse+0x100/0x100 netlink_rcv_skb+0x47/0x110 genl_rcv+0x24/0x40 netlink_unicast+0x217/0x2f0 netlink_sendmsg+0x30f/0x430 sock_sendmsg+0x30/0x40 __sys_sendto+0x10e/0x140 ? handle_mm_fault+0xc4/0x1f0 ? do_page_fault+0x33f/0x630 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x48/0x130 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 718ce4d601db ("net/mlx5: Consolidate update FTE for all removal changes") Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2020-09-21dm: fix comment in dm_process_bio()Mike Snitzer1-1/+3
Refer to the correct function (->submit_bio instead of ->queue_bio). Also, add details about why using blk_queue_split() isn't needed for dm_wq_work()'s call to dm_process_bio(). Fixes: c62b37d96b6eb ("block: move ->make_request_fn to struct block_device_operations") Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-21dm: fix bio splitting and its bio completion order for regular IOMike Snitzer1-21/+2
dm_queue_split() is removed because __split_and_process_bio() _must_ handle splitting bios to ensure proper bio submission and completion ordering as a bio is split. Otherwise, multiple recursive calls to ->submit_bio will cause multiple split bios to be allocated from the same ->bio_split mempool at the same time. This would result in deadlock in low memory conditions because no progress could be made (only one bio is available in ->bio_split mempool). This fix has been verified to still fix the loss of performance, due to excess splitting, that commit 120c9257f5f1 provided. Fixes: 120c9257f5f1 ("Revert "dm: always call blk_queue_split() in dm_process_bio()"") Cc: stable@vger.kernel.org # 5.0+, requires custom backport due to 5.9 changes Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-09-21ipv6: route: convert comma to semicolonXu Wang1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21sfc: Fix error code in probeDan Carpenter1-0/+1
This failure path should return a negative error code but it currently returns success. Fixes: 51b35a454efd ("sfc: skeleton EF100 PF driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-21iommu/io-pgtable-arm: Clean up faulty sanity checkRobin Murphy1-5/+0
Checking for a nonzero dma_pfn_offset was a quick shortcut to validate whether the DMA == phys assumption could hold at all. Checking for a non-NULL dma_range_map is not quite equivalent, since a map may be present to describe a limited DMA window even without an offset, and thus this check can now yield false positives. However, it only ever served to short-circuit going all the way through to __arm_lpae_alloc_pages(), failing the canonical test there, and having a bit more to clean up. As such, we can simply remove it without loss of correctness. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-21dma-debug: convert comma to semicolonXu Wang1-2/+2
Replace a comma between expression statements by a semicolon. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-21dax: Fix compilation for CONFIG_DAX && !CONFIG_FS_DAXJan Kara1-9/+8
dax_supported() is defined whenever CONFIG_DAX is enabled. So dummy implementation should be defined only in !CONFIG_DAX case, not in !CONFIG_FS_DAX case. Fixes: e2ec51282545 ("dm: Call proper helper to determine dax support") Cc: <stable@vger.kernel.org> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2020-09-21io_uring: fix openat/openat2 unified prep handlingJens Axboe1-2/+4
A previous commit unified how we handle prep for these two functions, but this means that we check the allowed context (SQPOLL, specifically) later than we should. Move the ring type checking into the two parent functions, instead of doing it after we've done some setup work. Fixes: ec65fea5a8d7 ("io_uring: deduplicate io_openat{,2}_prep()") Reported-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21io_uring: mark statx/files_update/epoll_ctl as non-SQPOLLJens Axboe1-2/+4
These will naturally fail when attempted through SQPOLL, but either with -EFAULT or -EBADF. Make it explicit that these are not workable through SQPOLL and return -EINVAL, just like other ops that need to use ->files. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-21tools/io_uring: fix compile breakageDouglas Gilbert1-2/+2
It would seem none of the kernel continuous integration does this: $ cd tools/io_uring $ make Otherwise it may have noticed: cc -Wall -Wextra -g -D_GNU_SOURCE -c -o io_uring-bench.o io_uring-bench.c io_uring-bench.c:133:12: error: static declaration of ‘gettid’ follows non-static declaration 133 | static int gettid(void) | ^~~~~~ In file included from /usr/include/unistd.h:1170, from io_uring-bench.c:27: /usr/include/x86_64-linux-gnu/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here 34 | extern __pid_t gettid (void) __THROW; | ^~~~~~ make: *** [<builtin>: io_uring-bench.o] Error 1 The problem on Ubuntu 20.04 (with lk 5.9.0-rc5) is that unistd.h already defines gettid(). So prefix the local definition with "lk_". Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.