| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There's no explanation in the original commit of why that was done, but
presumably flashing takes a long time and holding RTNL for so long
blocks other interactions with the netdev layer.
However, the stack is moving towards netdev instance locking and
dropping and reacquiring RTNL in the context of flashing introduces
locking ordering issues: RTNL must be acquired before the netdev
instance lock and released after it.
This patch therefore takes the simpler approach by no longer dropping
and reacquiring the RTNL, as soon RTNL for ethtool will be removed,
leaving only the instance lock to protect against races.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After the last patch removing vlan_rwsem, it is an incremental step to
allow ipoib to work with netdevs that require the instance lock.
In several places, netdev_lock() is changed to netdev_lock_ops_to_full()
which takes care of not acquiring the lock again when the netdev is
already locked.
In ipoib_ib_tx_timeout_work() and __ipoib_ib_dev_flush() for HEAVY
flushes, the netdev lock is acquired/released. This is needed because
these functions end up calling .ndo_stop()/.ndo_open() on subinterfaces,
and the device may expect the netdev instance lock to be held.
ipoib_set_mode() now explicitly acquires ops lock while manipulating the
features, mtu and tx queues.
Finally, ipoib_napi_enable()/ipoib_napi_disable() now use the *_locked
variants of the napi_enable()/napi_disable() calls and optionally
acquire the netdev lock themselves depending on the dev they operate on.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vlan_rwsem was added more than a decade ago to work around a deadlock
involving the original mutex being acquired twice, once from the wq.
Subsequent changes then tweaked it to partially protect access to
ipoib_dev_priv->child_intfs together with the RTNL. Flushing the wq
synchronously was also since then refactored to happen separately.
This semaphore unfortunately prevents updating ipoib to work with
devices that require the netdev lock, because of lock ordering issues
between RTNL, vlan_rwsem and the netdev instance locks of parent and
child devices.
To uncomplicate things, this commit replaces vlan_rwsem with the netdev
instance lock of the parent device. Both parent child_intfs list and the
children's list membership in it require holding the parent netdev
instance lock.
All call paths were carefully reviewed and no-longer-needed ASSERT_RTNL
calls were dropped. Some non-trivial changes:
- ipoib_match_gid_pkey_addr() now only acquires the instance lock and
iterates through child_intfs for the first level of recursion (the
parent), as it's not possible to have multiple levels of nested
subinterfaces.
- ipoib_open() and ipoib_stop() schedule tasks on the global workqueue
to open/stop child interfaces to avoid potentially acquiring nested
netdev instance locks. To avoid the device going away between the task
scheduling and execution, netdev_hold/netdev_put are used.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously, flushing a netdevice involved first flushing all child
devices from the flush task itself. That requires holding the lock that
protects the list for the entire duration of the flush.
This poses a problem when converting from vlan_rwsem to the netdev
instance lock (next patch), because holding the parent lock while
trying to acquire a child lock makes lockdep unhappy, rightfully.
Fix this by splitting a big flush task into individual flush tasks
(all are already created in their respective ipoib_dev_priv structs)
and defining a helper function to enqueue all of them while holding the
list lock.
In ipoib_set_mac, the function is not used and the task is enqueued
directly, because in the subsequent patches locking is changed and this
function may be called with the netdev instance lock held.
This is effectively a noop, the wq is single-threaded and ordered and
will execute the same flush operations in the same order as before.
Furthermore, there should be no new races because
ipoib_parent_unregister_pre() calls flush_workqueue() after stopping new
work generation to wait for pending work to complete. flush_workqueue()
waits for all currently enqueued work to finish before returning.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747829342-1018757-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When xdp is attached or detached, dev->ndo_bpf() is called by
do_setlink(), and it acquires netdev_lock() if needed.
Unlike other drivers, the bnxt driver is protected by netdev_lock while
xdp is attached/detached because it sets dev->request_ops_lock to true.
So, the bnxt_xdp(), that is callback of ->ndo_bpf should not acquire
netdev_lock().
But the xdp_features_{set | clear}_redirect_target() was changed to
acquire netdev_lock() internally.
It causes a deadlock.
To fix this problem, bnxt driver should use
xdp_features_{set | clear}_redirect_target_locked() instead.
Splat looks like:
============================================
WARNING: possible recursive locking detected
6.15.0-rc6+ #1 Not tainted
--------------------------------------------
bpftool/1745 is trying to acquire lock:
ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: xdp_features_set_redirect_target+0x1f/0x80
but task is already holding lock:
ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: do_setlink.constprop.0+0x24e/0x35d0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&dev->lock);
lock(&dev->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by bpftool/1745:
#0: ffffffffa56131c8 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_setlink+0x1fe/0x570
#1: ffffffffaafa75a0 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_setlink+0x236/0x570
#2: ffff888131b85038 (&dev->lock){+.+.}-{4:4}, at: do_setlink.constprop.0+0x24e/0x35d0
stack backtrace:
CPU: 1 UID: 0 PID: 1745 Comm: bpftool Not tainted 6.15.0-rc6+ #1 PREEMPT(undef)
Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021
Call Trace:
<TASK>
dump_stack_lvl+0x7a/0xd0
print_deadlock_bug+0x294/0x3d0
__lock_acquire+0x153b/0x28f0
lock_acquire+0x184/0x340
? xdp_features_set_redirect_target+0x1f/0x80
__mutex_lock+0x1ac/0x18a0
? xdp_features_set_redirect_target+0x1f/0x80
? xdp_features_set_redirect_target+0x1f/0x80
? __pfx_bnxt_rx_page_skb+0x10/0x10 [bnxt_en
? __pfx___mutex_lock+0x10/0x10
? __pfx_netdev_update_features+0x10/0x10
? bnxt_set_rx_skb_mode+0x284/0x540 [bnxt_en
? __pfx_bnxt_set_rx_skb_mode+0x10/0x10 [bnxt_en
? xdp_features_set_redirect_target+0x1f/0x80
xdp_features_set_redirect_target+0x1f/0x80
bnxt_xdp+0x34e/0x730 [bnxt_en 11cbcce8fa11cff1dddd7ef358d6219e4ca9add3]
dev_xdp_install+0x3f4/0x830
? __pfx_bnxt_xdp+0x10/0x10 [bnxt_en 11cbcce8fa11cff1dddd7ef358d6219e4ca9add3]
? __pfx_dev_xdp_install+0x10/0x10
dev_xdp_attach+0x560/0xf70
dev_change_xdp_fd+0x22d/0x280
do_setlink.constprop.0+0x2989/0x35d0
? __pfx_do_setlink.constprop.0+0x10/0x10
? lock_acquire+0x184/0x340
? find_held_lock+0x32/0x90
? rtnl_setlink+0x236/0x570
? rcu_is_watching+0x11/0xb0
? trace_contention_end+0xdc/0x120
? __mutex_lock+0x946/0x18a0
? __pfx___mutex_lock+0x10/0x10
? __lock_acquire+0xa95/0x28f0
? rcu_is_watching+0x11/0xb0
? rcu_is_watching+0x11/0xb0
? cap_capable+0x172/0x350
rtnl_setlink+0x2cd/0x570
Fixes: 03df156dd3a6 ("xdp: double protect netdev->xdp_flags with netdev->lock")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250520071155.2462843-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Multi-PTP source support within a network topology has been merged,
but the hardware timestamp source is not yet exposed to users.
Currently, users only see the PTP index, which does not indicate
whether the timestamp comes from a PHY or a MAC.
Add support for reporting the hwtstamp source using a
hwtstamp-source field, alongside hwtstamp-phyindex, to describe
the origin of the hardware timestamp.
Remove HWTSTAMP_SOURCE_UNSPEC enum value as it is not used at all.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250519-feature_ptp_source-v4-1-5d10e19a0265@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The current implementation maps the APR table using a fixed size,
which can lead to incorrect mapping when the number of PFs and VFs
varies.
This patch corrects the mapping by calculating the APR table
size dynamically based on the values configured in the
APR_LMT_CFG register, ensuring accurate representation
of APR entries in debugfs.
Fixes: 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://patch.msgid.link/20250521060834.19780-3-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch enables the LMT line for a PF/VF by setting the
LMT_ENA bit in the APR_LMT_MAP_ENTRY_S structure.
Additionally, it simplifies the logic for calculating the
LMTST table index by consistently using the maximum
number of hw supported VFs (i.e., 256).
Fixes: 873a1e3d207a ("octeontx2-af: cn10k: Setting up lmtst map table").
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521060834.19780-2-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Syzbot reported a slab-use-after-free with the following call trace:
==================================================================
BUG: KASAN: slab-use-after-free in tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
Read of size 8 at addr ffff88807a733000 by task kworker/1:0/25
Call Trace:
kasan_report+0xd9/0x110 mm/kasan/report.c:601
tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
crypto_request_complete include/crypto/algapi.h:266
aead_request_complete include/crypto/internal/aead.h:85
cryptd_aead_crypt+0x3b8/0x750 crypto/cryptd.c:772
crypto_request_complete include/crypto/algapi.h:266
cryptd_queue_worker+0x131/0x200 crypto/cryptd.c:181
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
Allocated by task 8355:
kzalloc_noprof include/linux/slab.h:778
tipc_crypto_start+0xcc/0x9e0 net/tipc/crypto.c:1466
tipc_init_net+0x2dd/0x430 net/tipc/core.c:72
ops_init+0xb9/0x650 net/core/net_namespace.c:139
setup_net+0x435/0xb40 net/core/net_namespace.c:343
copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508
create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x419/0x970 kernel/fork.c:3323
__do_sys_unshare kernel/fork.c:3394
Freed by task 63:
kfree+0x12a/0x3b0 mm/slub.c:4557
tipc_crypto_stop+0x23c/0x500 net/tipc/crypto.c:1539
tipc_exit_net+0x8c/0x110 net/tipc/core.c:119
ops_exit_list+0xb0/0x180 net/core/net_namespace.c:173
cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
After freed the tipc_crypto tx by delete namespace, tipc_aead_encrypt_done
may still visit it in cryptd_queue_worker workqueue.
I reproduce this issue by:
ip netns add ns1
ip link add veth1 type veth peer name veth2
ip link set veth1 netns ns1
ip netns exec ns1 tipc bearer enable media eth dev veth1
ip netns exec ns1 tipc node set key this_is_a_master_key master
ip netns exec ns1 tipc bearer disable media eth dev veth1
ip netns del ns1
The key of reproduction is that, simd_aead_encrypt is interrupted, leading
to crypto_simd_usable() return false. Thus, the cryptd_queue_worker is
triggered, and the tipc_crypto tx will be visited.
tipc_disc_timeout
tipc_bearer_xmit_skb
tipc_crypto_xmit
tipc_aead_encrypt
crypto_aead_encrypt
// encrypt()
simd_aead_encrypt
// crypto_simd_usable() is false
child = &ctx->cryptd_tfm->base;
simd_aead_encrypt
crypto_aead_encrypt
// encrypt()
cryptd_aead_encrypt_enqueue
cryptd_aead_enqueue
cryptd_enqueue_request
// trigger cryptd_queue_worker
queue_work_on(smp_processor_id(), cryptd_wq, &cpu_queue->work)
Fix this by holding net reference count before encrypt.
Reported-by: syzbot+55c12726619ff85ce1f6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=55c12726619ff85ce1f6
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20250520101404.1341730-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Priority flow control is not supported for LBK and SDP vf. This patch
adds support to not add dcbnl_ops for LBK and SDP vf.
Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519072658.2960851-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This test reproduces a scenario where HFSC queue length and backlog accounting
can become inconsistent when a peek operation triggers a dequeue and possible
drop before the parent qdisc updates its counters. The test sets up a DRR root
qdisc with an HFSC class, netem, and blackhole children, and uses Scapy to
inject a packet. It helps to verify that HFSC correctly tracks qlen and backlog
even when packets are dropped during peek-induced dequeue.
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-3-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the
child qdisc's peek() operation before incrementing sch->q.qlen and
sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may
trigger an immediate dequeue and potential packet drop. In such cases,
qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog
have not yet been updated, leading to inconsistent queue accounting. This
can leave an empty HFSC class in the active list, causing further
consequences like use-after-free.
This patch fixes the bug by moving the increment of sch->q.qlen and
sch->qstats.backlog before the call to the child qdisc's peek() operation.
This ensures that queue length and backlog are always accurate when packet
drops or dequeues are triggered during the peek.
Fixes: 12d0ad3be9c3 ("net/sched/sch_hfsc.c: handle corner cases where head may change invalidating calculated deadline")
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-2-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Having adjacent accelerated modify header actions (so-called
pattern-argument actions) may result in inconsistent outcome.
These inconsistencies can take the form of writes to the same
field or a read coupled with a write to the same field. The
solution is to detect such dependencies and insert nops between
the offending actions.
The existing implementation had a few issues, which pretty much
required a complete rewrite of the code that handles these
dependencies.
In the new implementation we're doing the following:
* Checking any two adjacent actions for conflicts (not just
odd-even pairs).
* Marking 'set' and 'add' action fields as destination, rather
than source, for the purposes of checking for conflicts.
* Checking all types of actions ('add', 'set', 'copy') for
dependencies.
* Managing offsets of the args in the buffer - copy the action
args to the right place in the buffer.
* Checking that after inserting nops we're still within the number
of supported actions - return an error otherwise.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix typo - rename 'nope_locations' to 'nop_locations', which describes
the locations of 'nop' actions. To shorten the lines, this renaming
also required some refactoring.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hardware steering handles actions differently from firmware, but for
termination rules that use encapsulation the firmware needs to be aware
of the action.
Fix this by registering reformat actions with the firmware the first
time this is needed. To do this, add a third possible owner for an
action, and also a lock to protect against registration of the same
action from different threads.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The firmware reformat id is a u32 and can't safely be returned as an
int. Because the functions also need a way to signal error, prefer to
return the id as an output parameter and keep the return code only for
success/error.
While we're at it, also extract some duplicate code to fetch the
reformat id from a more generic struct pkt_reformat.
Signed-off-by: Vlad Dogaru <vdogaru@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1747766802-958178-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While tracking an IDPF bug, I found that idpf_vport_splitq_napi_poll()
was not following NAPI rules.
It can indeed return @budget after napi_complete() has been called.
Add two debug conditions in networking core to hopefully catch
this kind of bugs sooner.
IDPF bug will be fixed in a separate patch.
[ 72.441242] repoll requested for device eth1 idpf_vport_splitq_napi_poll [idpf] but napi is not scheduled.
[ 72.446291] list_del corruption. next->prev should be ff31783d93b14040, but was ff31783d93b10080. (next=ff31783d93b10080)
[ 72.446659] kernel BUG at lib/list_debug.c:67!
[ 72.446816] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 72.447031] CPU: 156 UID: 0 PID: 16258 Comm: ip Tainted: G W 6.15.0-dbg-DEV #1944 NONE
[ 72.447340] Tainted: [W]=WARN
[ 72.447702] RIP: 0010:__list_del_entry_valid_or_report (lib/list_debug.c:65)
[ 72.450630] Call Trace:
[ 72.450720] <IRQ>
[ 72.450797] net_rx_action (include/linux/list.h:215 include/linux/list.h:287 net/core/dev.c:7385 net/core/dev.c:7516)
[ 72.450928] ? lock_release (kernel/locking/lockdep.c:?)
[ 72.451059] ? clockevents_program_event (kernel/time/clockevents.c:?)
[ 72.451222] handle_softirqs (kernel/softirq.c:579)
[ 72.451356] ? do_softirq (kernel/softirq.c:480)
[ 72.451480] ? idpf_vc_xn_exec (drivers/net/ethernet/intel/idpf/idpf_virtchnl.c:462) idpf
[ 72.451635] do_softirq (kernel/softirq.c:480)
[ 72.451750] </IRQ>
[ 72.451828] <TASK>
[ 72.451905] __local_bh_enable_ip (kernel/softirq.c:?)
[ 72.452051] idpf_vc_xn_exec (drivers/net/ethernet/intel/idpf/idpf_virtchnl.c:462) idpf
[ 72.452210] idpf_send_delete_queues_msg (drivers/net/ethernet/intel/idpf/idpf_virtchnl.c:2083) idpf
[ 72.452390] idpf_vport_stop (drivers/net/ethernet/intel/idpf/idpf_lib.c:837 drivers/net/ethernet/intel/idpf/idpf_lib.c:868) idpf
[ 72.452541] ? idpf_vport_stop (include/linux/bottom_half.h:? include/linux/netdevice.h:4762 drivers/net/ethernet/intel/idpf/idpf_lib.c:855) idpf
[ 72.452695] idpf_initiate_soft_reset (drivers/net/ethernet/intel/idpf/idpf_lib.c:?) idpf
[ 72.452867] idpf_change_mtu (drivers/net/ethernet/intel/idpf/idpf_lib.c:2189) idpf
[ 72.453015] netif_set_mtu_ext (net/core/dev.c:9437)
[ 72.453157] ? packet_notifier (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 net/packet/af_packet.c:4240)
[ 72.453292] netif_set_mtu (net/core/dev.c:9515)
[ 72.453416] dev_set_mtu (net/core/dev_api.c:?)
[ 72.453534] bond_change_mtu (drivers/net/bonding/bond_main.c:4833)
[ 72.453666] netif_set_mtu_ext (net/core/dev.c:9437)
[ 72.453803] do_setlink (net/core/rtnetlink.c:3116)
[ 72.453925] ? rtnl_newlink (net/core/rtnetlink.c:3901)
[ 72.454055] ? rtnl_newlink (net/core/rtnetlink.c:3901)
[ 72.454185] ? rtnl_newlink (net/core/rtnetlink.c:3901)
[ 72.454314] ? trace_contention_end (include/trace/events/lock.h:122)
[ 72.454467] ? __mutex_lock (arch/x86/include/asm/preempt.h:85 kernel/locking/mutex.c:611 kernel/locking/mutex.c:746)
[ 72.454597] ? cap_capable (include/trace/events/capability.h:26)
[ 72.454721] ? security_capable (security/security.c:?)
[ 72.454857] rtnl_newlink (net/core/rtnetlink.c:?)
[ 72.454982] ? lock_is_held_type (kernel/locking/lockdep.c:5599 kernel/locking/lockdep.c:5938)
[ 72.455121] ? __lock_acquire (kernel/locking/lockdep.c:?)
[ 72.455256] ? __change_page_attr_set_clr (arch/x86/mm/pat/set_memory.c:685)
[ 72.455438] ? __lock_acquire (kernel/locking/lockdep.c:?)
[ 72.455582] ? rtnetlink_rcv_msg (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 net/core/rtnetlink.c:6885)
[ 72.455721] ? lock_acquire (kernel/locking/lockdep.c:5866)
[ 72.455848] ? rtnetlink_rcv_msg (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 net/core/rtnetlink.c:6885)
[ 72.455987] ? lock_release (kernel/locking/lockdep.c:?)
[ 72.456117] ? rcu_read_unlock (include/linux/rcupdate.h:341 include/linux/rcupdate.h:871)
[ 72.456249] ? __pfx_rtnl_newlink (net/core/rtnetlink.c:3956)
[ 72.456388] rtnetlink_rcv_msg (net/core/rtnetlink.c:6955)
[ 72.456526] ? rtnetlink_rcv_msg (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 net/core/rtnetlink.c:6885)
[ 72.456671] ? lock_acquire (kernel/locking/lockdep.c:5866)
[ 72.456802] ? net_generic (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 include/net/netns/generic.h:45)
[ 72.456929] ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:6858)
[ 72.457082] netlink_rcv_skb (net/netlink/af_netlink.c:2534)
[ 72.457212] netlink_unicast (net/netlink/af_netlink.c:1313)
[ 72.457344] netlink_sendmsg (net/netlink/af_netlink.c:1883)
[ 72.457476] __sock_sendmsg (net/socket.c:712)
[ 72.457602] ____sys_sendmsg (net/socket.c:?)
[ 72.457735] ? _copy_from_user (arch/x86/include/asm/uaccess_64.h:126 arch/x86/include/asm/uaccess_64.h:134 arch/x86/include/asm/uaccess_64.h:141 include/linux/uaccess.h:178 lib/usercopy.c:18)
[ 72.457875] ___sys_sendmsg (net/socket.c:2620)
[ 72.458042] ? __call_rcu_common (arch/x86/include/asm/irqflags.h:42 arch/x86/include/asm/irqflags.h:119 arch/x86/include/asm/irqflags.h:159 kernel/rcu/tree.c:3107)
[ 72.458185] ? mntput_no_expire (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 fs/namespace.c:1457)
[ 72.458324] ? lock_acquire (kernel/locking/lockdep.c:5866)
[ 72.458451] ? mntput_no_expire (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 fs/namespace.c:1457)
[ 72.458588] ? lock_release (kernel/locking/lockdep.c:?)
[ 72.458718] ? mntput_no_expire (include/linux/rcupdate.h:331 include/linux/rcupdate.h:841 fs/namespace.c:1457)
[ 72.458856] __x64_sys_sendmsg (net/socket.c:2652)
[ 72.458997] ? do_syscall_64 (arch/x86/include/asm/irqflags.h:42 arch/x86/include/asm/irqflags.h:119 include/linux/entry-common.h:198 arch/x86/entry/syscall_64.c:90)
[ 72.459136] do_syscall_64 (arch/x86/entry/syscall_64.c:?)
[ 72.459259] ? exc_page_fault (arch/x86/mm/fault.c:1542)
[ 72.459387] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[ 72.459555] RIP: 0033:0x7fd15f17cbd0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250520121908.1805732-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
idpf_vport_splitq_napi_poll() can incorrectly return @budget
after napi_complete_done() has been called.
This violates NAPI rules, because after napi_complete_done(),
current thread lost napi ownership.
Move the test against POLL_MODE before the napi_complete_done().
Fixes: c2d548cad150 ("idpf: add TX splitq napi poll support")
Reported-by: Peter Newman <peternewman@google.com>
Closes: https://lore.kernel.org/netdev/20250520121908.1805732-1-edumazet@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Link: https://patch.msgid.link/20250520124030.1983936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enic started using netif_get_num_default_rss_queues() to set the number
of RQs used in commit cc94d6c4d40c ("enic: Adjust used MSI-X
wq/rq/cq/interrupt resources in a more robust way")
This resulted in machines with less than 16 cpus using less than 8 RQs.
Allow enic to use at least 8 RQs no matter how many cpus are in the
machine to not impact existing enic workloads after a kernel upgrade.
Reviewed-by: John Daley <johndale@cisco.com>
Reviewed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250521-enic_min_8rq-v1-1-691bd2353273@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is [1/3] part of hinic3 Ethernet driver initial submission.
With this patch hinic3 is a valid kernel module but non-functional
driver.
The driver parts contained in this patch:
Module initialization.
PCI driver registration but with empty id_table.
Auxiliary driver registration.
Net device_ops registration but open/stop are empty stubs.
tx/rx logic.
All major data structures of the driver are fully introduced with the
code that uses them but without their initialization code that requires
management interface with the hw.
Co-developed-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Xin Guo <guoxin09@huawei.com>
Signed-off-by: Fan Gong <gongfan1@huawei.com>
Co-developed-by: Gur Stavi <gur.stavi@huawei.com>
Signed-off-by: Gur Stavi <gur.stavi@huawei.com>
Link: https://patch.msgid.link/76a137ffdfe115c737c2c224f0c93b60ba53cc16.1747736586.git.gur.stavi@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix the misspelling of "Electronics" in copyright headers across:
- s3fwrn5 driver
- virtual_ncidev driver
Signed-off-by: Sumanth Gavini <sumanth.gavini@yahoo.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250520072119.176018-1-sumanth.gavini@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Logic here always sets hdr->version to 2 if it is not a BE3 or Lancer chip,
even if it is BE2. Use 'else if' to prevent multiple assignments, setting
version 0 for BE2, version 1 for BE3 and Lancer, and version 2 for others.
Fixes potential incorrect version setting when BE2_chip and
BE3_chip/lancer_chip checks could both be true.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250519141731.691136-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add Aeonsemi PHYs and the requirement of a firmware to correctly work.
Also document the max number of LEDs supported and what PHY ID expose
when no firmware is loaded.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x9410 on C45
registers before the firmware is loaded.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-7-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Aeonsemi AS21xxx 10G C45 PHYs. These PHYs integrate
an IPC to setup some configuration and require special handling to
sync with the parity bit. The parity bit is a way the IPC use to
follow correct order of command sent.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x7510
before the firmware is loaded.
They all support up to 5 LEDs with various HW mode supported.
While implementing it was found some strange coincidence with using the
same logic for implementing C22 in MMD regs in Broadcom PHYs.
For reference here the AS21xxx PHY name logic:
AS21x1xxB1
^ ^^
| |J: Supports SyncE/PTP
| |P: No SyncE/PTP support
| 1: Supports 2nd Serdes
| 2: Not 2nd Serdes support
0: 10G, 5G, 2.5G
5: 5G, 2.5G
2: 2.5G
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-6-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce new API, genphy_match_phy_device(), to provide a way to check
to match a PHY driver for a PHY device based on the info stored in the
PHY device struct.
The function generalize the logic used in phy_bus_match() to check the
PHY ID whether if C45 or C22 ID should be used for matching.
This is useful for custom .match_phy_device function that wants to use
the generic logic under some condition. (example a PHY is already setup
and provide the correct PHY ID)
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify .match_phy_device OP by using a generic function and using the
new phy_id PHY driver info instead of hardcoding the matching PHY ID
with new variant for macsec and no_macsec PHYs.
Also make use of PHY_ID_MATCH_MODEL macro and drop PHY_ID_MASK define to
introduce phy_id and phy_id_mask again in phy_driver struct.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-4-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify .match_phy_device OP by using a generic function and using the
new phy_id PHY driver info instead of hardcoding the matching PHY ID.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass PHY driver pointer to .match_phy_device OP in addition to phydev.
Having access to the PHY driver struct might be useful to check the
PHY ID of the driver is being matched for in case the PHY ID scanned in
the phydev is not consistent.
A scenario for this is a PHY that change PHY ID after a firmware is
loaded, in such case, the PHY ID stored in PHY device struct is not
valid anymore and PHY will manually scan the ID in the match_phy_device
function.
Having the PHY driver info is also useful for those PHY driver that
implement multiple simple .match_phy_device OP to match specific MMD PHY
ID. With this extra info if the parsing logic is the same, the matching
function can be generalized by using the phy_id in the PHY driver
instead of hardcoding.
Rust wrapper callback is updated to align to the new match_phy_device
arguments.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a log should be printed as info level, not error level.
Fixes: 9bfd65980f8d ("net: libwx: Add sriov api for wangxun nics")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/67409DB57B87E2F0+20250519063357.21164-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the driver reset fails, it may not work properly.
Therefore, the ndo.open() operation should be rejected.
In this patch, the driver calls netif_device_detach()
before the reset and calls netif_device_attach()
after the reset succeeds. If the reset fails,
netif_device_attach() is not called. Therefore,
netdev does not present and cannot be opened.
If reset fails, only the PCI reset (via sysfs)
can be used to attempt recovery.
Fixes: 3f5a61f6d504 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the user dumps statistics, the hibmcge driver automatically
updates all statistics. If the driver is performing the reset operation,
the error data of 0xFFFFFFFF is updated.
Therefore, if the driver is resetting, the hbg_update_stats_by_info()
needs to return directly.
Fixes: c0bf9bf31e79 ("net: hibmcge: Add support for dump statistics")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use min() instead of min_t() to avoid the possibility of casting to the
wrong type.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250520042031.9297-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that skb_copy_and_hash_datagram_iter() is no longer used, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-11-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations and there also now exists a function
skb_copy_and_crc32c_datagram_iter(), it is unnecessary to go through the
crypto_ahash API. Just use those functions. This is much simpler, and
it also improves performance due to eliminating the crypto API overhead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-10-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since skb_copy_and_hash_datagram_iter() is used only with CRC32C, the
crypto_ahash abstraction provides no value. Add
skb_copy_and_crc32c_datagram_iter() which just calls crc32c() directly.
This is faster and simpler. It also doesn't have the weird dependency
issue where skb_copy_and_hash_datagram_iter() depends on
CONFIG_CRYPTO_HASH=y without that being expressed explicitly in the
kconfig (presumably because it was too heavyweight for NET to select).
The new function is conditional on the hidden boolean symbol NET_CRC32C,
which selects CRC32. So it gets compiled only when something that
actually needs CRC32C packet checksums is enabled, it has no implicit
dependency, and it doesn't depend on the heavyweight crypto layer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-9-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
crc32c_combine() and crc32c_shift() are no longer used (except by the
KUnit test that tests them), and their current implementation is very
slow. Remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-8-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the only remaining caller of __skb_checksum() is
skb_checksum(), fold __skb_checksum() into skb_checksum(). This makes
struct skb_checksum_ops unnecessary, so remove that too and simply do
the "regular" net checksum. It also makes the wrapper functions
csum_partial_ext() and csum_block_add_ext() unnecessary, so remove those
too and just use the underlying functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-7-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sctp_compute_cksum() just use the new function skb_crc32c(),
instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C. This is faster and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C, just call the new function skb_crc32c(). This is faster
and simpler.
Acked-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C, just call the new function skb_crc32c(). This is faster
and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-4-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add skb_crc32c(), which calculates the CRC32C of a sk_buff. It will
replace __skb_checksum(), which unnecessarily supports arbitrary
checksums. Compared to __skb_checksum(), skb_crc32c():
- Uses the correct type for CRC32C values (u32, not __wsum).
- Does not require the caller to provide a skb_checksum_ops struct.
- Is faster because it does not use indirect calls and does not use
the very slow crc32c_combine().
According to commit 2817a336d4d5 ("net: skb_checksum: allow custom
update/combine for walking skb") which added __skb_checksum(), the
original motivation for the abstraction layer was to avoid code
duplication for CRC32C and other checksums in the future. However:
- No additional checksums showed up after CRC32C. __skb_checksum()
is only used with the "regular" net checksum and CRC32C.
- Indirect calls are expensive. Commit 2544af0344ba ("net: avoid
indirect calls in L4 checksum calculation") worked around this
using the INDIRECT_CALL_1 macro. But that only avoided the indirect
call for the net checksum, and at the cost of an extra branch.
- The checksums use different types (__wsum and u32), causing casts
to be needed.
- It made the checksums of fragments be combined (rather than
chained) for both checksums, despite this being highly
counterproductive for CRC32C due to how slow crc32c_combine() is.
This can clearly be seen in commit 4c2f24549644 ("sctp: linearize
early if it's not GSO") which tried to work around this performance
bug. With a dedicated function for each checksum, we can instead
just use the proper strategy for each checksum.
As shown by the following tables, the new function skb_crc32c() is
faster than __skb_checksum(), with the improvement varying greatly from
5% to 2500% depending on the case. The largest improvements come from
fragmented packets, mainly due to eliminating the inefficient
crc32c_combine(). But linear packets are improved too, especially
shorter ones, mainly due to eliminating indirect calls. These
benchmarks were done on AMD Zen 5. On that CPU, Linux uses IBRS instead
of retpoline; an even greater improvement might be seen with retpoline:
Linear sk_buffs
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 43 18
256 94 77
1420 204 161
16384 1735 1642
Nonlinear sk_buffs (even split between head and one fragment)
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 579 22
256 829 77
1420 1506 194
16384 4365 1682
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a hidden kconfig symbol NET_CRC32C that will group together the
functions that calculate CRC32C checksums of packets, so that these
don't have to be built into NET-enabled kernels that don't need them.
Make skb_crc32c_csum_help() (which is called only when IP_SCTP is
enabled) conditional on this symbol, and make IP_SCTP select it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a very simple TC dump sample with decoding of fq_codel attrs:
# ./tools/net/ynl/samples/tc
dummy0: fq_codel limit: 10240p target: 5ms new_flow_cnt: 0
proving that selector passing (for stats) works.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-13-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hook TC qdisc dump in the TC qdisc get, it only supported doit
until now and dumping will be used by the sample code.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We are ready to support most of TC. Enable C code gen.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TC uses all possible sub-message formats:
- nested attrs
- fixed headers + nested attrs
- fixed headers
- empty
Nested attrs are already supported for rt-link. Add support
for remaining 3. The empty and fixed headers ones are fairly
trivial, we can fake a Binary or Flags type instead of a Nest.
For fixed headers + nest we need to teach nest parsing and
nest put to handle fixed headers.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The _multi_parse() helper calls the _attr_get() method of each attr,
but it only respects what code the helper wants to emit, not what
local variables it needs. Local variables will soon be needed,
support them.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
RenderInfo describes a request-response exchange. Struct describes
a parsed attribute set. For ease of parsing sub-messages with
fixed headers move fixed header info from RenderInfo to Struct.
No functional changes.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In rtnetlink all submessages had the selector at the same level
of nesting as the submessage. We could refer to the relevant
attribute from the current struct. In TC, stats are one level
of nesting deeper than "kind". Teach the code-gen about structs
which need to be passed a selector by the caller for parsing.
Because structs are "topologically sorted" one pass of propagating
the selectors down is enough.
For generating netlink message we depend on the presence bits
so no selector passing needed there.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All attribute sets and messages are prefixed with tc-.
The C codegen also adds the family name to all structs.
We end up with names like struct tc_tc_act_attrs.
Remove the tc- prefixes to shorten the names.
This should not impact Python as the attr set names
are never exposed to user, they are only used to refer
to things internally, in the encoder / decoder.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250520161916.413298-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
Cosmin Ratiu
Taehee Yoo
Kory Maincent
Geetha sowjanya
Subbaraya Sundeep
Wang Liang
Suman Ghosh
Cong Wang
Yevgeny Kliteynik
Vlad Dogaru
Eric Dumazet
Nelson Escobar
Fan Gong
Sumanth Gavini
Alok Tiwari
Christian Marangi
Jiawen Wu
Jijie Shao
Justin Lai
Eric Biggers
Jakub Kicinski