aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-25ARM: dts: stm32: remove useless dma-ranges property for stm32f429Benjamin Gaignard1-1/+0
Remove dma-ranges from ltdc node since it is already set on bus node. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: disable active-discharge for vbus_otg on stm32mp157a-avenger96Pascal Paillet1-1/+0
Active discharge is not needed on vbus_otg and generate unneeded current consumption. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: Fix active discharge usage on stm32mp157Pascal Paillet3-4/+4
Active discharge is a uint32 not a boolean. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: change default minimal buck1 value on stm32mp157Pascal Paillet2-2/+2
Minimal value is the value set during boot or before suspend. We must ensure that the value is a functional value to boot. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: add PWR regulators support on stm32mp157Pascal Paillet5-24/+38
This patch adds support of STM32 PWR regulators on stm32mp157c. This replace dummy fixed regulators on stm32mp157c-ed1 and stm32mp157c-dk2. Signed-off-by: Pascal Paillet <p.paillet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: remove useless interrupt from dsi node for stm32f469Benjamin Gaignard1-1/+0
DSI driver doesn't use interrupt, remove it from the node since it breaks yaml check. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: add hdmi audio support to stm32mp157a-dk1 boardOlivier Moysan1-1/+26
Add HDMI audio support through Sil9022 HDMI transceiver on stm32mp157a-dk1 board. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: Add DAC support to stm32mp157c-ed1Fabrice Gasnier1-0/+13
stm32mp157c-ed1 board has digital-to-analog converter signals routed to JP11 and JP10 jumpers (e.g. PA4/PA5). It's easier then to configure them both. But keep them disabled by default, so the pins are kept in their initial state to lower power consumption. This way they can also be used as GPIO. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: Add DAC pins used on stm32mp157c-ed1Fabrice Gasnier1-0/+12
Define pins that can be used by digital-to-analog converter on stm32mp157c eval daughter board: - PA4 and PA5 pins are available respectively on JP11 and JP10 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: fix regulator-sd_switch node on stm32mp157c-ed1 boardAlexandre Torgue1-1/+2
This commit fixes regulator-sd_switch node in order to be compliant to DT validation schema. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: remove usb phy-names entries on stm32mp157c-ev1Alexandre Torgue1-2/+0
"phy-names" entries are not used. To be compliant with DT validation tool, those entries have to be remove. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: fix joystick node on stm32f746 and stm32mp157c eval boardsAlexandre Torgue2-2/+0
"#size-cells" entry is not needed for "gpio-keys" driver. Indeed "reg" entry is not used. This commit will fix a warnings seen by DT validation tool. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: fix memory nodes to match with DT validation toolAlexandre Torgue9-8/+9
DT validation ("make dtbs_check") has shown that some memory nodes were not correctly written. This commit fixes this kind of issue: "stm32f746-disco.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[3221225472, 8388608]]}" Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: add focaltech touchscreen on stm32mp157c-dk2 boardYannick Fertré1-0/+13
Enable focaltech ft6236 touchscreen on STM32MP157C-DK2 board. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: enable ADC support on stm32mp157a-dk1Fabrice Gasnier1-0/+27
Configure ADC support on stm32mp157a-dk1. It can be used for various purpose: - AIN connector has several analog inputs: ANA0, ANA1, ADC2 in6 & in2, ADC1 in13 & in6 - USB Type-C CC1 & CC2 pins wired to in18 & in19 It's easier then to Configure them all. But keep them disabled by default, so the pins are kept in their initial state to lower power consumption. This way they can also be used as GPIO. Add VDD and VDDA supplies to ADC on stm32mp157c-dk1 board. This allows to get full ADC analog performances in case VDDA is below 2.7V (not the case by default). Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1Fabrice Gasnier1-0/+16
Define pins that can be used for ADC on stm32mp157a-dk1 board: - AIN connector has ADC input pins - USB Type-C CC1 & CC2 pins (e.g. in18, in19) Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: Enable VREFBUF on stm32mp157a-dk1Fabrice Gasnier1-0/+7
Enable VREFBUF as ADC/DAC uses it on stm32mp157a-dk1 board. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-25ARM: dts: stm32: move ltdc pinctrl on stm32mp157a dk1 boardYannick Fertré1-3/+3
The ltdc pinctrl must be in the display controller node and not in the peripheral node (hdmi bridge). Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-10-23ARM: dts: bcm: HR2: add label to sp805 watchdogChris Packham1-1/+1
This allows boards the option of adding properties or disabling the watchdog entirely. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2019-10-23ARM: dts: add DTS for NetCom Plus 4xx and 8xx device seriesYegor Yefremov2-0/+116
This DTS file covers all four and eight port NetCom Plus devices. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-23ARM: dts: add DTS for NetCom Plus 1xx and 2xx device seriesYegor Yefremov2-0/+96
This DTS file covers all one and two port NetCom Plus devices. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-23ARM: dts: add DTS for NetCAN Plus devicesYegor Yefremov2-0/+88
This DTS file covers both NetCAN Plus 110 and 120 WLAN models. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-23ARM: OMAP2+: Drop legacy platform data for am335x musbTony Lindgren1-44/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. Cc: Bin Liu <b-liu@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-23ARM: dts: Drop pointless status changing for am3 musbTony Lindgren21-455/+0
The default is enabled, and there should be no need to reconfigure the status for SoC internal devices in the board specific files. Only the USB PHY used needs to be configured in the board specific files. Cc: Bin Liu <b-liu@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-23ARM: dts: Probe am335x musb with ti-syscTony Lindgren2-34/+39
We can now probe musb with ti-sysc interconnect driver and dts data with the following changes: 1. Swap the old ti,am33xx-usb compatible wrapper to generic ti-sysc driver. This means later on we can also remove the old wrapper driver drivers/usb/musb/musb_am335x.c 2. Update the child nodes to use the ranges provided by ti-sysc 3. Drop unneeded status = "enabled" tinkering for SoC internal devices. This allows us to remove some useless board specific boilerplate code in the following patches Cc: Bin Liu <b-liu@ti.com> Cc: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-23ARM: OMAP2+: Drop legacy platform data for musb on omap4Tony Lindgren2-64/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-23ARM: OMAP2+: Drop legacy platform data for omap4 mcaspTony Lindgren2-54/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-23ARM: OMAP2+: Drop legacy platform data for am3 and am4 mcaspTony Lindgren7-73/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-22ARM: dts: mmp3: add Dell Wyse 3020 machineLubomir Rintel2-1/+92
This is a Dell Wyse thin client, variously referred to as "Ariel", "3020" or "Tx0D" where "x" stands for the software it was shipped with. I somewhat arbitrarily chose "ariel". There are bits missing, because the drivers are not in and bindings are not settled yet: * Things missing from mmp3.dtsi: HSIC controller and its PHY (only the internal Ethernet is connected here, the hub with external USB2 ports is connected to the U2O controller that works well), Vivante GC2000 GPU * &twsi1/regulator@19 Marvell 88pm867 power regulator * &twsi3/vga-dvi-encoder@76 Chrontel CH7033B-BF VGA & DVI encoder * &twsi3/sound-codec@30 Sound chip, probably a Marvell 88ce156 * &twsi4/embedded-controller@58 ENE KB3930QF Embedded Controller, also seems to be connected to &ssp4. Might not need a driver -- about the only useful thing it can do is to reboot the machine when tickled via some GPIO lines. Also there seems to be something at &twsi1 address 0x50. Link: https://lore.kernel.org/r/20191022152837.3553524-1-lkundrak@v3.sk Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Olof Johansson <olof@lixom.net>
2019-10-22ARM: dts: omap: Rename "ocmcram" node to "sram"Krzysztof Kozlowski2-2/+2
The device node name should reflect generic class of a device so rename the "ocmcram" node to "sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-22ARM: dts: logicpd-torpedo-37xx-devkit: Increase camera pixel clockAdam Ford1-0/+5
The default settings used on the baseboard are good for the OMAP3530 and are compatible with the DM3730. However, the DM3730 has a faster L3 clock which means the camera pixel clock can also be pushed faster as well. This patch increase the Pixel clock to 90MHz which is the maximum the current ISP driver permits for an L3 clock of 200MHz. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-22ARM: dts: am: Rename "ocmcram" node to "sram"Krzysztof Kozlowski2-6/+6
The device node name should reflect generic class of a device so rename the "ocmcram" node and its children to "sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-22ARM: dts: logicpd-torpedo: Disable Bluetooth Serial DMAAdam Ford1-0/+1
The default serial driver for omap2plus is the 8250_omap driver. Unfortunately, this driver does not yet appear to have fully functional DMA on OMAP3630/DM3730 which causes some timeouts and frame errors. This patch removes the DMA entry from the device tree which allow the UART to operate without Bluetooth frame errors. If/when DMA is working on OMAP3630, this should be reverted. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-22ARM: dts: IGEP: Add WiLink UART nodeSebastian Reichel2-0/+16
Add a node for the UART part of WiLink chip. Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-22ARM: dts: LogicPD Torpedo: Add WiLink UART nodeSebastian Reichel1-0/+8
Add a node for the UART part of WiLink chip. This is compile tested only! Cc: Adam Ford <aford173@gmail.com> Acked-by: Adam Ford <aford173@gmail.com> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-22arm64: dts: actions: Add uSD and eMMC support for Bubblegum96Manivannan Sadhasivam1-0/+62
Add uSD and eMMC support for Bubblegum96 board based on Actions Semi S900 SoC. SD0 is connected to uSD slot and SD2 is connected to eMMC. Since there is no PMIC support added yet, fixed regulator has been used as a regulator node. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-22arm64: dts: actions: Add MMC controller support for S900Manivannan Sadhasivam1-0/+45
Add MMC controller support for Actions Semi S900 SoC. There are 4 MMC controllers in this SoC which can be used for accessing SD/MMC/SDIO cards. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-21arm64: dts: agilex: add service layer, fpga manager and fpga regionRichard Gong1-0/+32
Add service layer, fpga manager and fpga region to the device tree on Intel Agilex platform. Signed-off-by: Richard Gong <richard.gong@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-10-21arm64: agilex: enable USB and LEDs on agilex devkitDinh Nguyen1-0/+23
Enable USB on the Agilex devkit. Also the Agilex devkit will use the same daughter card that is used on Stratix10, thus it map the same LEDs and GPIOs. pushbutton PB_SW0 = gpio1.io4 pushbutton PB_SW1 = gpio1.io5 LED HPS_LED0 = gpio1.io20 LED HPS_LED1 = gpio1.io19 LED HPS_LED2 = gpio1.io21 Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-10-21arm64: dts: altera: update QSPI reg addresses for Stratix10Ooi, Joyce1-2/+2
This patch updates the reg addresses for QSPI boot and QSPI rootfs in the device tree for Stratix10 Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-10-21arm64: dts: agilex: add QSPI support for Intel AgilexOoi, Joyce1-0/+35
This patch adds QSPI flash interface in device tree for Intel Agilex Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
2019-10-21ARM: OMAP2+: Drop legacy platform data for dra7 rngTony Lindgren2-37/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21ARM: OMAP2+: Drop legacy platform data for am3 and am4 rngTony Lindgren7-43/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21ARM: OMAP2+: Drop legacy platform data for omap4 hdq1wTony Lindgren2-44/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21ARM: OMAP2+: Drop legacy platform data for dra7 hdq1wTony Lindgren2-44/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21ARM: OMAP2+: Drop legacy platform data for am4 hdq1wTony Lindgren2-37/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21ARM: OMAP2+: Drop legacy platform data for omap5 mcbspTony Lindgren2-116/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21ARM: OMAP2+: Drop legacy platform data for omap4 mcbspTony Lindgren3-147/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21ARM: OMAP2+: Drop legacy platform data for omap5 wdtTony Lindgren2-48/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-21ARM: OMAP2+: Drop legacy platform data for dra7 wdtTony Lindgren2-48/+0
We can now probe devices with ti-sysc interconnect driver and dts data. Let's drop the related platform data and custom ti,hwmods dts property. As we're just dropping data, and the early platform data init is based on the custom ti,hwmods property, we want to drop both the platform data and ti,hwmods property in a single patch. Cc: Keerthy <j-keerthy@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.