| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was
mis-applied to bnxt_cfg_ntp_filters() and should have been applied to
bnxt_sp_task().
Fixes: 19241368443f ("bnxt_en: Send PF driver unload notification to all VFs.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
CSR.OPS bits specify the current operating mode and (according to
documentation) they are updated by HW when the operating mode change
request is processed. To comply with this check CSR.OPS before proceeding.
Commit introduces ravb_set_opmode() that does all the necessities for
setting the operating mode (set CCC.OPC (and CCC.GAC, CCC.CSEL, if any) and
wait for CSR.OPS) and call it where needed. This should comply with all the
HW manuals requirements as different manual variants specify that different
modes need to be checked in CSR.OPS when setting CCC.OPC.
If gPTP active in config mode is supported and it needs to be enabled, the
CCC.GAC and CCC.CSEL needs to be configured along with CCC.OPC in the same
write access. For this, ravb_set_opmode() allows passing GAC and CSEL as
part of opmode and the function updates accordingly CCC register.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.
Fixes: 16626b0cc3d5 ("asix: Add a new driver for the AX88172A")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During QoS scheduling testing with multiple strict priority flows, the
netdev tx watchdog timeout routine is invoked when a low priority QoS
queue doesn't get a chance to transmit the packets because other high
priority flows are completely subscribing the transmit link. The netdev
tx watchdog timeout routine will stop MAC RX and TX functionality in
otx2_stop() routine before cleanup of HW TX queues which results in SMQ
flush errors because the packets belonging to low priority queues will
never gets flushed since MAC TX is disabled. This patch fixes the issue
by re-enabling MAC TX to ensure the packets in HW pipeline gets flushed
properly.
Fixes: a7faa68b4e7f ("octeontx2-af: Start/Stop traffic in CGX along with NPC")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the NIX TX link credits are initialized based on the max frame
size that can be transmitted on a link but when the MTU is changed, the
NIX TX link credits are reprogrammed by the SW based on the new MTU value.
Since SMQ max packet length is programmed to max frame size by default,
there is a chance that NIX TX may stall while sending a max frame sized
packet on the link with insufficient credits to send the packet all at
once. This patch avoids stall issue by not changing the link credits
dynamically when the MTU is changed.
Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A crash was found when dumping SMC-R connections. It can be reproduced
by following steps:
- environment: two RNICs on both sides.
- run SMC-R between two sides, now a SMC_LGR_SYMMETRIC type link group
will be created.
- set the first RNIC down on either side and link group will turn to
SMC_LGR_ASYMMETRIC_LOCAL then.
- run 'smcss -R' and the crash will be triggered.
BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8000000101fdd067 P4D 8000000101fdd067 PUD 10ce46067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 1810 Comm: smcss Kdump: loaded Tainted: G W E 6.7.0-rc6+ #51
RIP: 0010:__smc_diag_dump.constprop.0+0x36e/0x620 [smc_diag]
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x66/0x150
? exc_page_fault+0x69/0x140
? asm_exc_page_fault+0x26/0x30
? __smc_diag_dump.constprop.0+0x36e/0x620 [smc_diag]
smc_diag_dump_proto+0xd0/0xf0 [smc_diag]
smc_diag_dump+0x26/0x60 [smc_diag]
netlink_dump+0x19f/0x320
__netlink_dump_start+0x1dc/0x300
smc_diag_handler_dump+0x6a/0x80 [smc_diag]
? __pfx_smc_diag_dump+0x10/0x10 [smc_diag]
sock_diag_rcv_msg+0x121/0x140
? __pfx_sock_diag_rcv_msg+0x10/0x10
netlink_rcv_skb+0x5a/0x110
sock_diag_rcv+0x28/0x40
netlink_unicast+0x22a/0x330
netlink_sendmsg+0x240/0x4a0
__sock_sendmsg+0xb0/0xc0
____sys_sendmsg+0x24e/0x300
? copy_msghdr_from_user+0x62/0x80
___sys_sendmsg+0x7c/0xd0
? __do_fault+0x34/0x1a0
? do_read_fault+0x5f/0x100
? do_fault+0xb0/0x110
__sys_sendmsg+0x4d/0x80
do_syscall_64+0x45/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
When the first RNIC is set down, the lgr->lnk[0] will be cleared and an
asymmetric link will be allocated in lgr->link[SMC_LINKS_PER_LGR_MAX - 1]
by smc_llc_alloc_alt_link(). Then when we try to dump SMC-R connections
in __smc_diag_dump(), the invalid lgr->lnk[0] will be accessed, resulting
in this issue. So fix it by accessing the right link.
Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Reported-by: henaumars <henaumars@sina.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7616
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Link: https://lore.kernel.org/r/1703662835-53416-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When dma_alloc_coherent() fails, we should free qdev->lrg_buf
to prevent potential memleak.
Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue based on the MTU.")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231227070227.10527-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For rq, we have three cases getting buffers from virtio core:
1. virtqueue_get_buf{,_ctx}
2. virtqueue_detach_unused_buf
3. callback for virtqueue_resize
But in commit 295525e29a5b("virtio_net: merge dma operations when
filling mergeable buffers"), I missed the dma unmap for the #3 case.
That will leak some memory, because I did not release the pages referred
by the unused buffers.
If we do such script, we will make the system OOM.
while true
do
ethtool -G ens4 rx 128
ethtool -G ens4 rx 256
free -m
done
Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20231226094333.47740-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 86a7e0b69bd5 ("net: prevent rewrite of msg_name in
sock_sendmsg()") made sock_sendmsg save the incoming msg_name pointer
and restore it before returning, to insulate the caller against
msg_name being changed by the called code. If the address length
was also changed however, we may return with an inconsistent structure
where the length doesn't match the address, and attempts to reuse it may
lead to lost packets.
For example, a kernel that doesn't have commit 1c5950fc6fe9 ("udp6: fix
potential access to stale information") will replace a v4 mapped address
with its ipv4 equivalent, and shorten namelen accordingly from 28 to 16.
If the caller attempts to reuse the resulting msg structure, it will have
the original ipv6 (v4 mapped) address but an incorrect v4 length.
Fixes: 86a7e0b69bd5 ("net: prevent rewrite of msg_name in sock_sendmsg()")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In the init path, nft_data_init() bumps the chain reference counter,
decrement it on error by following the error path which calls
nft_data_release() to restore it.
Fixes: 4bedf9eee016 ("netfilter: nf_tables: fix chain binding transaction logic")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This fixes openvswitch's handling of nat packets in the related state.
In nf_ct_nat_execute(), which is called from nf_ct_nat(), ICMP/ICMPv6
packets in the IP_CT_RELATED or IP_CT_RELATED_REPLY state, which have
not been dropped, will follow the goto, however the placement of the
goto label means that updating the action bit field will be bypassed.
This causes ovs_nat_update_key() to not be called from ovs_ct_nat()
which means the openvswitch match key for the ICMP/ICMPv6 packet is not
updated and the pre-nat value will be retained for the key, which will
result in the wrong openflow rule being matched for that packet.
Move the goto label above where the action bit field is being set so
that it is updated in all cases where the packet is accepted.
Fixes: ebddb1404900 ("net: move the nat function to nf_nat_ovs for ovs and tc")
Signed-off-by: Brad Cowie <brad@faucet.nz>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The flag DMA_TX_APPEND_CRC was only written to the first DMA descriptor
in the TX path, where each descriptor corresponds to a single skbuff
fragment (or the skbuff head). This led to packets with no FCS appearing
on the wire if the kernel allocated the packet in fragments, which would
always happen when using PACKET_MMAP/TPACKET (cf. tpacket_fill_skb() in
net/af_packet.c).
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Adrian Cinal <adriancinal1@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231228135638.1339245-1-adriancinal1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MPTCP protocol does not expect that any other entity could change
the first subflow status when such socket is listening.
Unfortunately the TCP diag interface allows aborting any TCP socket,
including MPTCP listeners subflows. As reported by syzbot, that trigger
a WARN() and could lead to later bigger trouble.
The MPTCP protocol needs to do some MPTCP-level cleanup actions to
properly shutdown the listener. To keep the fix simple, prevent
entirely the diag interface from stopping such listeners.
We could refine the diag callback in a later, larger patch targeting
net-next.
Fixes: 57fc0f1ceaa4 ("mptcp: ensure listener is unhashed before updating the sk status")
Cc: stable@vger.kernel.org
Reported-by: <syzbot+5a01c3a666e726bc8752@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/netdev/0000000000004f4579060c68431b@google.com/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231226-upstream-net-20231226-mptcp-prevent-warn-v1-2-1404dcc431ea@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For a long time now, Geliang has contributed to a lot of code and
reviews related to MPTCP. So let's reflect that in the MAINTAINERS file.
This should also encourage patch submitters to add him to the CC list.
Acked-by: Geliang Tang <geliang.tang@linux.dev>
Acked-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231226-upstream-net-20231226-mptcp-prevent-warn-v1-1-1404dcc431ea@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I no longer use mw@semihalf.com email. Update
mvpp2 driver entry with my alternative address.
Signed-off-by: Marcin Wojtas <marcin.s.wojtas@gmail.com>
Link: https://lore.kernel.org/r/20231225225245.1606-1-marcin.s.wojtas@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In efx_probe_filters, the channel->rps_flow_id is freed in a
efx_for_each_channel marco when success equals to 0.
However, after the following call chain:
ef100_net_open
|-> efx_probe_filters
|-> ef100_net_stop
|-> efx_remove_filters
The channel->rps_flow_id is freed again in the efx_for_each_channel of
efx_remove_filters, triggering a double-free bug.
Fixes: a9dc3d5612ce ("sfc_ef100: RX filter table management and related gubbins")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Link: https://lore.kernel.org/r/20231225112915.3544581-1-alexious@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit had a bug and might not have been the right approach anyway.
Fixes: 629df6701c8a ("net: ipv6/addrconf: clamp preferred_lft to the minimum required")
Fixes: ec575f885e3e ("Documentation: networking: explain what happens if temp_prefered_lft is too small or too large")
Reported-by: Dan Moulding <dan@danm.net>
Closes: https://lore.kernel.org/netdev/20231221231115.12402-1-dan@danm.net/
Link: https://lore.kernel.org/netdev/CAMMLpeTdYhd=7hhPi2Y7pwdPCgnnW5JYh-bu3hSc7im39uxnEA@mail.gmail.com/
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231230043252.10530-1-alexhenrie24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Similar to commit be809424659c ("selftests: bonding: do not set port down
before adding to bond"). The bond-arp-interval-causes-panic test failed
after commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing
it up") as the kernel will set the port down _after_ adding to bond if setting
port down specifically.
Fix it by removing the link down operation when adding to bond.
Fixes: 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we register a cn_proc listening event, the proc_event_num_listener
variable will be incremented by one, but if PROC_CN_MCAST_IGNORE is
not called, the count will not decrease.
This will cause the proc_*_connector function to take the wrong path.
It will reappear when the forkstat tool exits via ctrl + c.
We solve this problem by determining whether
there are still listeners to clear proc_event_num_listener.
Signed-off-by: wangkeqi <wangkeqiwang@didiglobal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the @phy_timer: line to prevent the kernel-doc warning:
include/linux/phy.h:768: warning: Excess struct member 'phy_timer' description in 'phy_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. Setting the option is handled in
sk_setsockopt(), querying it was not handled in sk_getsockopt(), though.
Following remarks on an earlier submission of this patch, keep the old
behavior of getsockopt(SO_TIMESTAMPING_OLD) which returns the active
flags even if they actually have been set through SO_TIMESTAMPING_NEW.
The new getsockopt(SO_TIMESTAMPING_NEW) is stricter, returning flags
only if they have been set through the same option.
Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/lkml/20230703175048.151683-1-jthinz@mailbox.tu-berlin.de/
Link: https://lore.kernel.org/netdev/0d7cddc9-03fa-43db-a579-14f3e822615b@app.fastmail.com/
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When a 'DEL_CLIENT' message is received from the remote, the corresponding
server port gets deleted. A DEL_SERVER message is then announced for this
server. As part of handling the subsequent DEL_SERVER message, the name-
server attempts to delete the server port which results in a '-ENOENT' error.
The return value from server_del() is then propagated back to qrtr_ns_worker,
causing excessive error prints.
To address this, return 0 from control_cmd_del_server() without checking the
return value of server_del(), since the above scenario is not an error case
and hence server_del() doesn't have any other error return value.
Signed-off-by: Sarannya Sasikumar <quic_sarannya@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I am stepping down as TJA11XX C45 maintainer.
Andrei Botila will take the responsibility to maintain and improve the
support for TJA11XX C45 PHYs.
Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some r8168 NICs stop working upon system resume:
[ 688.051096] r8169 0000:02:00.1 enp2s0f1: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000).
[ 688.175131] r8169 0000:02:00.1 enp2s0f1: Link is Down
...
[ 691.534611] r8169 0000:02:00.1 enp2s0f1: PCI error (cmd = 0x0407, status_errs = 0x0000)
Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)
Trial and error shows that increase the loop wait on
rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let
rtl8168ep_driver_start() to wait a bit longer.
Fixes: e6d6ca6e1204 ("r8169: Add support for another RTL8168FP")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The freeing and re-allocation of algorithm are protected by cpool_mutex,
so it doesn't fix an actual use-after-free, but avoids a deserved
refcount_warn_saturate() warning.
A trivial fix for the racy behavior.
Fixes: 8c73b26315aa ("net/tcp: Prepare tcp_md5sig_pool for TCP-AO")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
m->data needs to be freed when em_text_destroy is called.
Fixes: d675c989ed2d ("[PKT_SCHED]: Packet classification based on textsearch (ematch)")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Under heavy traffic, the BlueField Gigabit interface can
become unresponsive. This is due to a possible race condition
in the mlxbf_gige_rx_packet function, where the function exits
with producer and consumer indices equal but there are remaining
packet(s) to be processed. In order to prevent this situation,
read receive consumer index *before* the HW replenish so that
the mlxbf_gige_rx_packet function returns an accurate return
value even if a packet is received into just-replenished buffer
prior to exiting this routine. If the just-replenished buffer
is received and occupies the last RX ring entry, the interface
would not recover and instead would encounter RX packet drops
related to internal buffer shortages since the driver RX logic
is not being triggered to drain the RX ring. This patch will
address and prevent this "ring full" condition.
Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When unregistering the DPLL subsystem the priv pointer is different then
the one used for registration which cause failure in unregistering.
Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.
For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
| m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Suggested-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.
There are two ways to handle the VLAN TCI mask:
1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter
Therefore, add checks and code for that.
For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x0 mask: 0xffff
| VLAN: 0x1 mask: 0x1fff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 1
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
| action 1
|rmgr: Cannot insert RX class rule: Operation not supported
Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently the driver allows to configure matching by VLAN EtherType.
However, the retrieval function does not report it back to the user. Add
it.
Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| Action: Direct to queue 0
After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
| Flow Type: Raw Ethernet
| Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
| Ethertype: 0x0 mask: 0xFFFF
| VLAN EtherType: 0x8100 mask: 0x0
| VLAN: 0x0 mask: 0xffff
| User-defined: 0x0 mask: 0xffffffffffffffff
| Action: Direct to queue 0
Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Prevent VF from configuring filters with unsupported actions or use
REDIRECT action with invalid tc number. Current checks could cause
out of bounds access on PF side.
Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Stop dividing the phase_offset value received from firmware. This fault
is present since the initial implementation.
The phase_offset value received from firmware is in 0.01ps resolution.
Dpll subsystem is using the value in 0.001ps, raw value is adjusted
before providing it to the user.
The user can observe the value of phase offset with response to
`pin-get` netlink message of dpll subsystem for an active pin:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-get --json '{"id":2}'
Where example of correct response would be:
{'board-label': 'C827_0-RCLKA',
'capabilities': 6,
'clock-id': 4658613174691613800,
'frequency': 1953125,
'id': 2,
'module-name': 'ice',
'parent-device': [{'direction': 'input',
'parent-id': 6,
'phase-offset': -216839550,
'prio': 9,
'state': 'connected'},
{'direction': 'input',
'parent-id': 7,
'phase-offset': -42930,
'prio': 8,
'state': 'connected'}],
'phase-adjust': 0,
'phase-adjust-max': 16723,
'phase-adjust-min': -16723,
'type': 'mux'}
Provided phase-offset value (-42930) shall be divided by the user with
DPLL_PHASE_OFFSET_DIVIDER to get actual value of -42.930 ps.
Before the fix, the response was not correct:
{'board-label': 'C827_0-RCLKA',
'capabilities': 6,
'clock-id': 4658613174691613800,
'frequency': 1953125,
'id': 2,
'module-name': 'ice',
'parent-device': [{'direction': 'input',
'parent-id': 6,
'phase-offset': -216839,
'prio': 9,
'state': 'connected'},
{'direction': 'input',
'parent-id': 7,
'phase-offset': -42,
'prio': 8,
'state': 'connected'}],
'phase-adjust': 0,
'phase-adjust-max': 16723,
'phase-adjust-min': -16723,
'type': 'mux'}
Where phase-offset value (-42), after division
(DPLL_PHASE_OFFSET_DIVIDER) would be: -0.042 ps.
Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration")
Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Disabling netdev with ethtool private flag "link-down-on-close" enabled
can cause NULL pointer dereference bug. Shut down VSI regardless of
"link-down-on-close" state.
Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The driver should not report an error message when for a medialess port
the link_down_on_close flag is enabled and the physical link cannot be
set down.
Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Katarzyna Wieczerzycka <katarzyna.wieczerzycka@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Couple of structures was not marked as __packed. This patch
fixes the same and mark them as __packed.
Fixes: 42006910b5ea ("octeontx2-af: cleanup KPU config data")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Size of the virtchnl2_rss_key struct should be 7 bytes but the
compiler introduces a padding byte for the structure alignment.
This results in idpf sending an additional byte of memory to the device
control plane than the expected buffer size. As the control plane
enforces virtchnl message size checks to validate the message,
set RSS key message fails resulting in the driver load failure.
Remove implicit compiler padding by using "__packed" structure
attribute for the virtchnl2_rss_key struct.
Also there is no need to use __DECLARE_FLEX_ARRAY macro for the
'key_flex' struct field. So drop it.
Fixes: 0d7502a9b4a7 ("virtchnl: add virtchnl version 2 ops")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Scott Register <scott.register@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
idpf_ring::skb serves only for keeping an incomplete frame between
several NAPI Rx polling cycles, as one cycle may end up before
processing the end of packet descriptor. The pointer is taken from
the ring onto the stack before entering the loop and gets written
there after the loop exits. When inside the loop, only the onstack
pointer is used.
For some reason, the logics is broken in the singleq mode, where the
pointer is taken from the ring each iteration. This means that if a
frame got fragmented into several descriptors, each fragment will have
its own skb, but only the last one will be passed up the stack
(containing garbage), leaving the rest leaked.
Then, on ifdown, rxq::skb is being freed only in the splitq mode, while
it can point to a valid skb in singleq as well. This can lead to a yet
another skb leak.
Just don't touch the ring skb field inside the polling loop, letting
the onstack skb pointer work as expected: build a new skb if it's the
first frame descriptor and attach a frag otherwise. On ifdown, free
rxq::skb unconditionally if the pointer is non-NULL.
Fixes: a5ab9ee0df0b ("idpf: add singleq start_xmit and napi poll")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Scott Register <scott.register@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
As we know we cannot send the datagram (state can be set to LLCP_CLOSED
by nfc_llcp_socket_release()), there is no need to proceed further.
Thus, bail out early from llcp_sock_sendmsg().
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
llcp_sock_sendmsg() calls nfc_llcp_send_ui_frame() which in turn calls
nfc_alloc_send_skb(), which accesses the nfc_dev from the llcp_sock for
getting the headroom and tailroom needed for skb allocation.
Parallelly the nfc_dev can be freed, as the refcount is decreased via
nfc_free_device(), leading to a UAF reported by Syzkaller, which can
be summarized as follows:
(1) llcp_sock_sendmsg() -> nfc_llcp_send_ui_frame()
-> nfc_alloc_send_skb() -> Dereference *nfc_dev
(2) virtual_ncidev_close() -> nci_free_device() -> nfc_free_device()
-> put_device() -> nfc_release() -> Free *nfc_dev
When a reference to llcp_local is acquired, we do not acquire the same
for the nfc_dev. This leads to freeing even when the llcp_local is in
use, and this is the case with the UAF described above too.
Thus, when we acquire a reference to llcp_local, we should acquire a
reference to nfc_dev, and release the references appropriately later.
References for llcp_local is initialized in nfc_llcp_register_device()
(which is called by nfc_register_device()). Thus, we should acquire a
reference to nfc_dev there.
nfc_unregister_device() calls nfc_llcp_unregister_device() which in
turn calls nfc_llcp_local_put(). Thus, the reference to nfc_dev is
appropriately released later.
Reported-and-tested-by: syzbot+bbe84a4010eeea00982d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bbe84a4010eeea00982d
Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some drivers might misbehave if TSO packets get too big.
GVE for instance uses a 16bit field in its TX descriptor,
and will do bad things if a packet is bigger than 2^16 bytes.
Linux TCP stack honors dev->gso_max_size, but there are
other ways for too big packets to reach an ndo_start_xmit()
handler : virtio_net, af_packet, GRO...
Add a generic check in gso_features_check() and fallback
to GSO when needed.
gso_max_size was added in the blamed commit.
Fixes: 82cc1a7a5687 ("[NET]: Add per-connection option to set max TSO frame size")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219125331.4127498-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
run_cmd_grep_fail should be used when expecting the cmd fail, or the ret
will be set to 1, and the total test return 1 when exiting. This would cause
the result report to fail if run via run_kselftest.sh.
Before fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
1
After fix:
# ./rtnetlink.sh -t kci_test_addrlft
PASS: preferred_lft addresses have expired
# echo $?
0
Fixes: 9c2a19f71515 ("kselftest: rtnetlink.sh: add verbose flag")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231219065737.1725120-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This reverts commit 3dec89b14d37ee635e772636dad3f09f78f1ab87.
The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.
Fixes: 3dec89b14d37 ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
GCC seems to incorrectly fail to evaluate skb_ext_total_length() at
compile time under certain conditions.
The issue even occurs if all values in skb_ext_type_len[] are "0",
ruling out the possibility of an actual overflow.
As the patch has been in mainline since v6.6 without triggering the
problem it seems to be a very uncommon occurrence.
As the issue only occurs when -fno-tree-loop-im is specified as part of
CFLAGS_GCOV, disable the BUILD_BUG_ON() only when building with coverage
reporting enabled.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312171924.4FozI5FG-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/lkml/487cfd35-fe68-416f-9bfd-6bb417f98304@app.fastmail.com/
Fixes: 5d21d0a65b57 ("net: generalize calculation of skb extensions length")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231218-net-skbuff-build-bug-v1-1-eefc2fb0a7d3@weissschuh.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to avoid a NULL pointer dereference, check entry->buf pointer before running
skb_free_frag in mtk_wed_wo_queue_tx_clean routine.
Fixes: 799684448e3e ("net: ethernet: mtk_wed: introduce wed wo support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/3c1262464d215faa8acebfc08869798c81c96f4a.1702827359.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Only the posix timer system calls use this (when the posix timer support
is disabled, which does not actually happen in any normal case), because
they had debug code to print out a warning about missing system calls.
Get rid of that special case, and just use the standard COND_SYSCALL
interface that creates weak system call stubs that return -ENOSYS for
when the system call does not exist.
This fixes a kCFI issue with the SYS_NI() hackery:
CFI failure at int80_emulation+0x67/0xb0 (target: sys_ni_posix_timers+0x0/0x70; expected type: 0xb02b34d9)
WARNING: CPU: 0 PID: 48 at int80_emulation+0x67/0xb0
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fix the warning introduced by mt6360 node in
mt8395-genio-1200-evk.dts.
arch/arm64/boot/dts/mediatek/mt8195.dtsi:464.4-27: Warning (interrupts_property): /soc/i2c@11d01000/pmic@34:#interrupt-cells: size is (8), expected multiple of 16
Add a missing 'interrupt-parent' to fix this warning.
Fixes: f2b543a191b6 ("arm64: dts: mediatek: add device-tree for Genio 1200 EVK board")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-devicetree/20231212214737.230115-1-arnd@kernel.org/
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
NFT_MSG_DELSET deactivates all elements in the set, skip
set->ops->commit() to avoid the unnecessary clone (for the pipapo case)
as well as the sync GC cycle, which could deactivate again expired
elements in such set.
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Kevin Rich <kevinrich1337@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The driver should continue get the timestamp if STMMAC_FLAG_EXT_SNAPSHOT_EN
flag is set.
Fixes: aa5513f5d95f ("net: stmmac: replace the ext_snapshot_en field with a flag")
Cc: <stable@vger.kernel.org> # 6.6
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Lai Peter Jun Ann <jun.ann.lai@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before this patch, transport offset (pkt->thoff) provides an offset
relative to the network header. This is fine for the inet families
because skb->data points to the network header in such case. However,
from netdev/egress, skb->data points to the mac header (if available),
thus, pkt->thoff is missing the mac header length.
Add skb_network_offset() to the transport offset (pkt->thoff) for
netdev, so transport header mangling works as expected. Adjust payload
fast eval function to use skb->data now that pkt->thoff provides an
absolute offset. This explains why users report that matching on
egress/netdev works but payload mangling does not.
This patch implicitly fixes payload mangling for IPv4 packets in
netdev/egress given skb_store_bits() requires an offset from skb->data
to reach the transport header.
I suspect that nft_exthdr and the trace infra were also broken from
netdev/egress because they also take skb->data as start, and pkt->thoff
was not correct.
Note that IPv6 is fine because ipv6_find_hdr() already provides a
transport offset starting from skb->data, which includes
skb_network_offset().
The bridge family also uses nft_set_pktinfo_ipv4_validate(), but there
skb_network_offset() is zero, so the update in this patch does not alter
the existing behaviour.
Fixes: 42df6e1d221d ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
Michael Chan
Claudiu Beznea
Chen Ni
Naveen Mamindlapalli
Wen Gu
Dinghao Liu
Xuan Zhuo
Marc Dionne
Pablo Neira Ayuso
Brad Cowie
Adrian Cinal
Paolo Abeni
Matthieu Baerts
Marcin Wojtas
Zhipeng Lu
Alex Henrie
Hangbin Liu
wangkeqi
Randy Dunlap
Jörn-Thorben Hinz
Sarannya S
Radu Pirea (NXP OSS)
Kai-Heng Feng
Dmitry Safonov
Hangyu Hua
David Thompson
Sagi Maimon
Kurt Kanzenbach
Sudheer Mogilappagari
Arkadiusz Kubalewski
Ngai-Mint Kwan
Katarzyna Wieczerzycka
Suman Ghosh
Pavan Kumar Linga
Alexander Lobakin
Siddh Raman Pant
Eric Dumazet
David Ahern
Thomas Weißschuh
Lorenzo Bianconi
Linus Torvalds
Macpaul Lin
Lai Peter Jun Ann