| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
In case rogue guests are sending events at high frequency it might
happen that xen_evtchn_do_upcall() won't stop processing events in
dom0. As this is done in irq handling a crash might be the result.
In order to avoid that, delay further inter-domain events after some
time in xen_evtchn_do_upcall() by forcing eoi processing into a
worker on the same cpu, thus inhibiting new events coming in.
The time after which eoi processing is to be delayed is configurable
via a new module parameter "event_loop_timeout" which specifies the
maximum event loop time in jiffies (default: 2, the value was chosen
after some tests showing that a value of 2 was the lowest with an
only slight drop of dom0 network throughput while multiple guests
performed an event storm).
How long eoi processing will be delayed can be specified via another
parameter "event_eoi_delay" (again in jiffies, default 10, again the
value was chosen after testing with different delay values).
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
Today only fifo event channels have a cpu hotplug callback. In order
to prepare for more percpu (de)init work move that callback into
events_base.c and add percpu_init() and percpu_deinit() hooks to
struct evtchn_ops.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
Instead of disabling the irq when an event is received and enabling
it again when handled by the user process use the lateeoi model.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving pcifront use the lateeoi irq
binding for pciback and unmask the event channel only just before
leaving the event handling function.
Restructure the handling to support that scheme. Basically an event can
come in for two reasons: either a normal request for a pciback action,
which is handled in a worker, or in case the guest has finished an AER
request which was requested by pciback.
When an AER request is issued to the guest and a normal pciback action
is currently active issue an EOI early in order to be able to receive
another event when the AER request has been finished by the guest.
Let the worker processing the normal requests run until no further
request is pending, instead of starting a new worker ion that case.
Issue the EOI only just before leaving the worker.
This scheme allows to drop calling the generic function
xen_pcibk_test_and_schedule_op() after processing of any request as
the handling of both request types is now separated more cleanly.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving pvcallsfront use the lateeoi
irq binding for pvcallsback and unmask the event channel only after
handling all write requests, which are the ones coming in via an irq.
This requires modifying the logic a little bit to not require an event
for each write request, but to keep the ioworker running until no
further data is found on the ring page to be processed.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving scsifront use the lateeoi
irq binding for scsiback and unmask the event channel only just before
leaving the event handling function.
In case of a ring protocol error don't issue an EOI in order to avoid
the possibility to use that for producing an event storm. This at once
will result in no further call of scsiback_irq_fn(), so the ring_error
struct member can be dropped and scsiback_do_cmd_fn() can signal the
protocol error via a negative return value.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving netfront use the lateeoi
irq binding for netback and unmask the event channel only just before
going to sleep waiting for new events.
Make sure not to issue an EOI when none is pending by introducing an
eoi_pending element to struct xenvif_queue.
When no request has been consumed set the spurious flag when sending
the EOI for an interrupt.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
In order to reduce the chance for the system becoming unresponsive due
to event storms triggered by a misbehaving blkfront use the lateeoi
irq binding for blkback and unmask the event channel only after
processing all pending requests.
As the thread processing requests is used to do purging work in regular
intervals an EOI may be sent only after having received an event. If
there was no pending I/O request flag the EOI as spurious.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
In order to avoid tight event channel related IRQ loops add a new
framework of "late EOI" handling: the IRQ the event channel is bound
to will be masked until the event has been handled and the related
driver is capable to handle another event. The driver is responsible
for unmasking the event channel via the new function xen_irq_lateeoi().
This is similar to binding an event channel to a threaded IRQ, but
without having to structure the driver accordingly.
In order to support a future special handling in case a rogue guest
is sending lots of unsolicited events, add a flag to xen_irq_lateeoi()
which can be set by the caller to indicate the event was a spurious
one.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Reported-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
Unmasking a fifo event channel can result in unmasking it twice, once
directly in the kernel and once via a hypercall in case the event was
pending.
Fix that by doing the local unmask only if the event is not pending.
This is part of XSA-332.
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
|
|
A follow-up patch will require certain write to happen before an event
channel is unmasked.
While the memory barrier is not strictly necessary for all the callers,
the main one will need it. In order to avoid an extra memory barrier
when using fifo event channels, mandate evtchn_unmask() to provide
write ordering.
The 2-level event handling unmask operation is missing an appropriate
barrier, so add it. Fifo event channels are fine in this regard due to
using sync_cmpxchg().
This is part of XSA-332.
Cc: stable@vger.kernel.org
Suggested-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
Today it can happen that an event channel is being removed from the
system while the event handling loop is active. This can lead to a
race resulting in crashes or WARN() splats when trying to access the
irq_info structure related to the event channel.
Fix this problem by using a rwlock taken as reader in the event
handling loop and as writer when deallocating the irq_info structure.
As the observed problem was a NULL dereference in evtchn_from_irq()
make this function more robust against races by testing the irq_info
pointer to be not NULL before dereferencing it.
And finally make all accesses to evtchn_to_irq[row][col] atomic ones
in order to avoid seeing partial updates of an array element in irq
handling. Note that irq handling can be entered only for event channels
which have been valid before, so any not populated row isn't a problem
in this regard, as rows are only ever added and never removed.
This is XSA-331.
Cc: stable@vger.kernel.org
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reported-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Wei Liu <wl@xen.org>
|
|
Since commit c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units
with no supported address widths") dmar.c needs struct iommu_device to
be selected. We can drop this dependency by not dereferencing struct
iommu_device if IOMMU_API is not selected and by reusing the information
stored in iommu->drhd->ignored instead.
This fixes the following build error when IOMMU_API is not selected:
drivers/iommu/intel/dmar.c: In function ‘free_iommu’:
drivers/iommu/intel/dmar.c:1139:41: error: ‘struct iommu_device’ has no member named ‘ops’
1139 | if (intel_iommu_enabled && iommu->iommu.ops) {
^
Fixes: c40aaaac1018 ("iommu/vt-d: Gracefully handle DMAR units with no supported address widths")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20201013073055.11262-1-brgl@bgdev.pl
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
[Why]
Missed removing a '!' which results in incorrect behavior
[How]
Remove the offending '!'
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201015194053.355335-1-eryk.brol@amd.com
|
|
asm/sections.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lkml.kernel.org/r/1600088607-17327-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
No point in having the filename inside the file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002124035.1539300-3-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "two small vmalloc cleanups".
This patch (of 2):
__vmalloc_area_node currently has four different gfp_t variables to
just express this simple logic:
- use the passed in mask, plus __GFP_NOWARN and __GFP_HIGHMEM (if
suitable) for the underlying page allocation
- use just the reclaim flags from the passed in mask plus __GFP_ZERO
for allocating the page array
Simplify this down to just use the pre-existing nested_gfp as-is for
the page array allocation, and just the passed in gfp_mask for the
page allocation, after conditionally ORing __GFP_HIGHMEM into it. This
also makes the allocation warning a little more correct.
Also initialize two variables at the time of declaration while touching
this area.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002124035.1539300-1-hch@lst.de
Link: https://lkml.kernel.org/r/20201002124035.1539300-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All users are gone now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-12-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Replace the last call to alloc_vm_area with an open coded version using an
iterator in struct gnttab_vm_area instead of the triple indirection magic
in alloc_vm_area.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-11-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Replacing alloc_vm_area with get_vm_area_caller + apply_page_range allows
to fill put the phys_addr values directly instead of doing another loop
over all addresses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-10-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
i915_gem_object_map implements fairly low-level vmap functionality in a
driver. Split it into two helpers, one for remapping kernel memory which
can use vmap, and one for I/O memory that uses vmap_pfn.
The only practical difference is that alloc_vm_area prefeaults the vmalloc
area PTEs, which doesn't seem to be required here for the kernel memory
case (and could be added to vmap using a flag if actually required).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-9-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kmap for !PageHighmem is just a convoluted way to say page_address, and
kunmap is a no-op in that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-8-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
shmem_pin_map somewhat awkwardly reimplements vmap using alloc_vm_area and
manual pte setup. The only practical difference is that alloc_vm_area
prefeaults the vmalloc area PTEs, which doesn't seem to be required here
(and could be added to vmap using a flag if actually required). Switch to
use vmap, and use vfree to free both the vmalloc mapping and the page
array, as well as dropping the references to each page.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-7-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Just manually pre-fault the PTEs using apply_to_page_range.
Co-developed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-6-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Besides calling the callback on each page, apply_to_page_range also has
the effect of pre-faulting all PTEs for the range. To support callers
that only need the pre-faulting, make the callback optional.
Based on a patch from Minchan Kim <minchan@kernel.org>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-5-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a proper helper to remap PFNs into kernel virtual space so that
drivers don't have to abuse alloc_vm_area and open coded PTE manipulation
for it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-4-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a flag so that vmap takes ownership of the passed in page array. When
vfree is called on such an allocation it will put one reference on each
page, and free the page array itself.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-3-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "remove alloc_vm_area", v4.
This series removes alloc_vm_area, which was left over from the big
vmalloc interface rework. It is a rather arkane interface, basicaly the
equivalent of get_vm_area + actually faulting in all PTEs in the allocated
area. It was originally addeds for Xen (which isn't modular to start
with), and then grew users in zsmalloc and i915 which seems to mostly
qualify as abuses of the interface, especially for i915 as a random driver
should not set up PTE bits directly.
This patch (of 11):
* Document that you can call vfree() on an address returned from vmap()
* Remove the note about the minimum size -- the minimum size of a vmalloc
allocation is one page
* Add a Context: section
* Fix capitalisation
* Reword the prohibition on calling from NMI context to avoid a double
negative
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lkml.kernel.org/r/20201002122204.1534411-1-hch@lst.de
Link: https://lkml.kernel.org/r/20201002122204.1534411-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is usecase that System Management Software(SMS) want to give a
memory hint like MADV_[COLD|PAGEEOUT] to other processes and in the
case of Android, it is the ActivityManagerService.
The information required to make the reclaim decision is not known to the
app. Instead, it is known to the centralized userspace
daemon(ActivityManagerService), and that daemon must be able to initiate
reclaim on its own without any app involvement.
To solve the issue, this patch introduces a new syscall
process_madvise(2). It uses pidfd of an external process to give the
hint. It also supports vector address range because Android app has
thousands of vmas due to zygote so it's totally waste of CPU and power if
we should call the syscall one by one for each vma.(With testing 2000-vma
syscall vs 1-vector syscall, it showed 15% performance improvement. I
think it would be bigger in real practice because the testing ran very
cache friendly environment).
Another potential use case for the vector range is to amortize the cost
ofTLB shootdowns for multiple ranges when using MADV_DONTNEED; this could
benefit users like TCP receive zerocopy and malloc implementations. In
future, we could find more usecases for other advises so let's make it
happens as API since we introduce a new syscall at this moment. With
that, existing madvise(2) user could replace it with process_madvise(2)
with their own pid if they want to have batch address ranges support
feature.
ince it could affect other process's address range, only privileged
process(PTRACE_MODE_ATTACH_FSCREDS) or something else(e.g., being the same
UID) gives it the right to ptrace the process could use it successfully.
The flag argument is reserved for future use if we need to extend the API.
I think supporting all hints madvise has/will supported/support to
process_madvise is rather risky. Because we are not sure all hints make
sense from external process and implementation for the hint may rely on
the caller being in the current context so it could be error-prone. Thus,
I just limited hints as MADV_[COLD|PAGEOUT] in this patch.
If someone want to add other hints, we could hear the usecase and review
it for each hint. It's safer for maintenance rather than introducing a
buggy syscall but hard to fix it later.
So finally, the API is as follows,
ssize_t process_madvise(int pidfd, const struct iovec *iovec,
unsigned long vlen, int advice, unsigned int flags);
DESCRIPTION
The process_madvise() system call is used to give advice or directions
to the kernel about the address ranges from external process as well as
local process. It provides the advice to address ranges of process
described by iovec and vlen. The goal of such advice is to improve
system or application performance.
The pidfd selects the process referred to by the PID file descriptor
specified in pidfd. (See pidofd_open(2) for further information)
The pointer iovec points to an array of iovec structures, defined in
<sys/uio.h> as:
struct iovec {
void *iov_base; /* starting address */
size_t iov_len; /* number of bytes to be advised */
};
The iovec describes address ranges beginning at address(iov_base)
and with size length of bytes(iov_len).
The vlen represents the number of elements in iovec.
The advice is indicated in the advice argument, which is one of the
following at this moment if the target process specified by pidfd is
external.
MADV_COLD
MADV_PAGEOUT
Permission to provide a hint to external process is governed by a
ptrace access mode PTRACE_MODE_ATTACH_FSCREDS check; see ptrace(2).
The process_madvise supports every advice madvise(2) has if target
process is in same thread group with calling process so user could
use process_madvise(2) to extend existing madvise(2) to support
vector address ranges.
RETURN VALUE
On success, process_madvise() returns the number of bytes advised.
This return value may be less than the total number of requested
bytes, if an error occurred. The caller should check return value
to determine whether a partial advice occurred.
FAQ:
Q.1 - Why does any external entity have better knowledge?
Quote from Sandeep
"For Android, every application (including the special SystemServer)
are forked from Zygote. The reason of course is to share as many
libraries and classes between the two as possible to benefit from the
preloading during boot.
After applications start, (almost) all of the APIs end up calling into
this SystemServer process over IPC (binder) and back to the
application.
In a fully running system, the SystemServer monitors every single
process periodically to calculate their PSS / RSS and also decides
which process is "important" to the user for interactivity.
So, because of how these processes start _and_ the fact that the
SystemServer is looping to monitor each process, it does tend to *know*
which address range of the application is not used / useful.
Besides, we can never rely on applications to clean things up
themselves. We've had the "hey app1, the system is low on memory,
please trim your memory usage down" notifications for a long time[1].
They rely on applications honoring the broadcasts and very few do.
So, if we want to avoid the inevitable killing of the application and
restarting it, some way to be able to tell the OS about unimportant
memory in these applications will be useful.
- ssp
Q.2 - How to guarantee the race(i.e., object validation) between when
giving a hint from an external process and get the hint from the target
process?
process_madvise operates on the target process's address space as it
exists at the instant that process_madvise is called. If the space
target process can run between the time the process_madvise process
inspects the target process address space and the time that
process_madvise is actually called, process_madvise may operate on
memory regions that the calling process does not expect. It's the
responsibility of the process calling process_madvise to close this
race condition. For example, the calling process can suspend the
target process with ptrace, SIGSTOP, or the freezer cgroup so that it
doesn't have an opportunity to change its own address space before
process_madvise is called. Another option is to operate on memory
regions that the caller knows a priori will be unchanged in the target
process. Yet another option is to accept the race for certain
process_madvise calls after reasoning that mistargeting will do no
harm. The suggested API itself does not provide synchronization. It
also apply other APIs like move_pages, process_vm_write.
The race isn't really a problem though. Why is it so wrong to require
that callers do their own synchronization in some manner? Nobody
objects to write(2) merely because it's possible for two processes to
open the same file and clobber each other's writes --- instead, we tell
people to use flock or something. Think about mmap. It never
guarantees newly allocated address space is still valid when the user
tries to access it because other threads could unmap the memory right
before. That's where we need synchronization by using other API or
design from userside. It shouldn't be part of API itself. If someone
needs more fine-grained synchronization rather than process level,
there were two ideas suggested - cookie[2] and anon-fd[3]. Both are
applicable via using last reserved argument of the API but I don't
think it's necessary right now since we have already ways to prevent
the race so don't want to add additional complexity with more
fine-grained optimization model.
To make the API extend, it reserved an unsigned long as last argument
so we could support it in future if someone really needs it.
Q.3 - Why doesn't ptrace work?
Injecting an madvise in the target process using ptrace would not work
for us because such injected madvise would have to be executed by the
target process, which means that process would have to be runnable and
that creates the risk of the abovementioned race and hinting a wrong
VMA. Furthermore, we want to act the hint in caller's context, not the
callee's, because the callee is usually limited in cpuset/cgroups or
even freezed state so they can't act by themselves quick enough, which
causes more thrashing/kill. It doesn't work if the target process are
ptraced(e.g., strace, debugger, minidump) because a process can have at
most one ptracer.
[1] https://developer.android.com/topic/performance/memory"
[2] process_getinfo for getting the cookie which is updated whenever
vma of process address layout are changed - Daniel Colascione -
https://lore.kernel.org/lkml/20190520035254.57579-1-minchan@kernel.org/T/#m7694416fd179b2066a2c62b5b139b14e3894e224
[3] anonymous fd which is used for the object(i.e., address range)
validation - Michal Hocko -
https://lore.kernel.org/lkml/20200120112722.GY18451@dhcp22.suse.cz/
[minchan@kernel.org: fix process_madvise build break for arm64]
Link: http://lkml.kernel.org/r/20200303145756.GA219683@google.com
[minchan@kernel.org: fix build error for mips of process_madvise]
Link: http://lkml.kernel.org/r/20200508052517.GA197378@google.com
[akpm@linux-foundation.org: fix patch ordering issue]
[akpm@linux-foundation.org: fix arm64 whoops]
[minchan@kernel.org: make process_madvise() vlen arg have type size_t, per Florian]
[akpm@linux-foundation.org: fix i386 build]
[sfr@canb.auug.org.au: fix syscall numbering]
Link: https://lkml.kernel.org/r/20200905142639.49fc3f1a@canb.auug.org.au
[sfr@canb.auug.org.au: madvise.c needs compat.h]
Link: https://lkml.kernel.org/r/20200908204547.285646b4@canb.auug.org.au
[minchan@kernel.org: fix mips build]
Link: https://lkml.kernel.org/r/20200909173655.GC2435453@google.com
[yuehaibing@huawei.com: remove duplicate header which is included twice]
Link: https://lkml.kernel.org/r/20200915121550.30584-1-yuehaibing@huawei.com
[minchan@kernel.org: do not use helper functions for process_madvise]
Link: https://lkml.kernel.org/r/20200921175539.GB387368@google.com
[akpm@linux-foundation.org: pidfd_get_pid() gained an argument]
[sfr@canb.auug.org.au: fix up for "iov_iter: transparently handle compat iovecs in import_iovec"]
Link: https://lkml.kernel.org/r/20200928212542.468e1fef@canb.auug.org.au
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Daniel Colascione <dancol@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-3-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200508183320.GA125527@google.com
Link: http://lkml.kernel.org/r/20200622192900.22757-4-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-4-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
process_madvise syscall needs pidfd_get_pid function to translate pidfd to
pid so this patch move the function to kernel/pid.c.
Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jann Horn <jannh@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Dias <joaodias@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200302193630.68771-5-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200622192900.22757-3-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-3-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "introduce memory hinting API for external process", v9.
Now, we have MADV_PAGEOUT and MADV_COLD as madvise hinting API. With
that, application could give hints to kernel what memory range are
preferred to be reclaimed. However, in some platform(e.g., Android), the
information required to make the hinting decision is not known to the app.
Instead, it is known to a centralized userspace daemon(e.g.,
ActivityManagerService), and that daemon must be able to initiate reclaim
on its own without any app involvement.
To solve the concern, this patch introduces new syscall -
process_madvise(2). Bascially, it's same with madvise(2) syscall but it
has some differences.
1. It needs pidfd of target process to provide the hint
2. It supports only MADV_{COLD|PAGEOUT|MERGEABLE|UNMEREABLE} at this
moment. Other hints in madvise will be opened when there are explicit
requests from community to prevent unexpected bugs we couldn't support.
3. Only privileged processes can do something for other process's
address space.
For more detail of the new API, please see "mm: introduce external memory
hinting API" description in this patchset.
This patch (of 3):
In upcoming patches, do_madvise will be called from external process
context so we shouldn't asssume "current" is always hinted process's
task_struct.
Furthermore, we must not access mm_struct via task->mm, but obtain it via
access_mm() once (in the following patch) and only use that pointer [1],
so pass it to do_madvise() as well. Note the vma->vm_mm pointers are
safe, so we can use them further down the call stack.
And let's pass current->mm as arguments of do_madvise so it shouldn't
change existing behavior but prepare next patch to make review easy.
[vbabka@suse.cz: changelog tweak]
[minchan@kernel.org: use current->mm for io_uring]
Link: http://lkml.kernel.org/r/20200423145215.72666-1-minchan@kernel.org
[akpm@linux-foundation.org: fix it for upstream changes]
[akpm@linux-foundation.org: whoops]
[rdunlap@infradead.org: add missing includes]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jann Horn <jannh@google.com>
Cc: Tim Murray <timmurray@google.com>
Cc: Daniel Colascione <dancol@google.com>
Cc: Sandeep Patil <sspatil@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: John Dias <joaodias@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Cc: <linux-man@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200901000633.1920247-1-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200622192900.22757-1-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200302193630.68771-2-minchan@kernel.org
Link: http://lkml.kernel.org/r/20200622192900.22757-2-minchan@kernel.org
Link: https://lkml.kernel.org/r/20200901000633.1920247-2-minchan@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch reduces the running time for hmm-tests from about 10+ seconds,
to just under 1.0 second, for an approximately 10x speedup. That brings
it in line with most of the other tests in selftests/vm, which mostly run
in < 1 sec.
This is done with a one-line change that simply reduces the number of
iterations of several tests, from 256, to 10. Thanks to Ralph Campbell
for suggesting changing NTIMES as a way to get the speedup.
Suggested-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: SeongJae Park <sj38.park@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lkml.kernel.org/r/20201003011721.44238-1-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
create_elf_tables() runs after setup_new_exec(), so other tasks can
already access our new mm and do things like process_madvise() on it. (At
the time I'm writing this commit, process_madvise() is not in mainline
yet, but has been in akpm's tree for some time.)
While I believe that there are currently no APIs that would actually allow
another process to mess up our VMA tree (process_madvise() is limited to
MADV_COLD and MADV_PAGEOUT, and uring and userfaultfd cannot reach an mm
under which no syscalls have been executed yet), this seems like an
accident waiting to happen.
Let's make sure that we always take the mmap lock around GUP paths as long
as another process might be able to see the mm.
(Yes, this diff looks suspicious because we drop the lock before doing
anything with `vma`, but that's because we actually don't do anything with
it apart from the NULL check.)
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michel Lespinasse <walken@google.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lkml.kernel.org/r/CAG48ez1-PBCdv3y8pn-Ty-b+FmBSLwDuVKFSt8h7wARLy0dF-Q@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To be safe against concurrent changes to the VMA tree, we must take the
mmap lock around GUP operations (excluding the GUP-fast family of
operations, which will take the mmap lock by themselves if necessary).
This code is only for testing, and it's only reachable by root through
debugfs, so this doesn't really have any impact; however, if we want to
add lockdep asserts into the GUP path, we need to have clean locking here.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Michel Lespinasse <walken@google.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lkml.kernel.org/r/CAG48ez3SG6ngZLtasxJ6LABpOnqCz5-QHqb0B4k44TQ8F9n6+w@mail.gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are two locations that have a block of code for munmapping a vma
range. Change those two locations to use a function and add meaningful
comments about what happens to the arguments, which was unclear in the
previous code.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200818154707.2515169-2-Liam.Howlett@Oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are three places that the next vma is required which uses the same
block of code. Replace the block with a function and add comments on what
happens in the case where NULL is encountered.
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200818154707.2515169-1-Liam.Howlett@Oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is no need to check if this process has the right to modify the
specified process when they are same. And we could also skip the security
hook call if a process is modifying its own pages. Add helper function to
handle these.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Hongxiang Lou <louhongxiang@huawei.com>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christopher Lameter <cl@linux.com>
Link: https://lkml.kernel.org/r/20200819083331.19012-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
To calculate the correct node to migrate the page for hotplug, we need to
check node id of the page. Wrapper for alloc_migration_target() exists
for this purpose.
However, Vlastimil informs that all migration source pages come from a
single node. In this case, we don't need to check the node id for each
page and we don't need to re-set the target nodemask for each page by
using the wrapper. Set up the migration_target_control once and use it
for all pages.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-10-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a well-defined standard migration target callback. Use it
directly.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Roman Gushchin <guro@fb.com>
Link: http://lkml.kernel.org/r/1594622517-20681-9-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If a memcg to charge can be determined (using remote charging API), there
are no reasons to exclude allocations made from an interrupt context from
the accounting.
Such allocations will pass even if the resulting memcg size will exceed
the hard limit, but it will affect the application of the memory pressure
and an inability to put the workload under the limit will eventually
trigger the OOM.
To use active_memcg() helper, memcg_kmem_bypass() is moved back to
memcontrol.c.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-5-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Remote memcg charging API uses current->active_memcg to store the
currently active memory cgroup, which overwrites the memory cgroup of the
current process. It works well for normal contexts, but doesn't work for
interrupt contexts: indeed, if an interrupt occurs during the execution of
a section with an active memcg set, all allocations inside the interrupt
will be charged to the active memcg set (given that we'll enable
accounting for allocations from an interrupt context). But because the
interrupt might have no relation to the active memcg set outside, it's
obviously wrong from the accounting prospective.
To resolve this problem, let's add a global percpu int_active_memcg
variable, which will be used to store an active memory cgroup which will
be used from interrupt contexts. set_active_memcg() will transparently
use current->active_memcg or int_active_memcg depending on the context.
To make the read part simple and transparent for the caller, let's
introduce two new functions:
- struct mem_cgroup *active_memcg(void),
- struct mem_cgroup *get_active_memcg(void).
They are returning the active memcg if it's set, hiding all implementation
details: where to get it depending on the current context.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-4-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There are checks for current->mm and current->active_memcg in
get_obj_cgroup_from_current(), but these checks are redundant:
memcg_kmem_bypass() called just above performs same checks.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-3-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "mm: kmem: kernel memory accounting in an interrupt context".
This patchset implements memcg-based memory accounting of allocations made
from an interrupt context.
Historically, such allocations were passed unaccounted mostly because
charging the memory cgroup of the current process wasn't an option. Also
performance reasons were likely a reason too.
The remote charging API allows to temporarily overwrite the currently
active memory cgroup, so that all memory allocations are accounted towards
some specified memory cgroup instead of the memory cgroup of the current
process.
This patchset extends the remote charging API so that it can be used from
an interrupt context. Then it removes the fence that prevented the
accounting of allocations made from an interrupt context. It also
contains a couple of optimizations/code refactorings.
This patchset doesn't directly enable accounting for any specific
allocations, but prepares the code base for it. The bpf memory accounting
will likely be the first user of it: a typical example is a bpf program
parsing an incoming network packet, which allocates an entry in hashmap
map to store some information.
This patch (of 4):
Currently memcg_kmem_bypass() is called before obtaining the current
memory/obj cgroup using get_mem/obj_cgroup_from_current(). Moving
memcg_kmem_bypass() into get_mem/obj_cgroup_from_current() reduces the
number of call sites and allows further code simplifications.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Link: http://lkml.kernel.org/r/20200827225843.1270629-1-guro@fb.com
Link: http://lkml.kernel.org/r/20200827225843.1270629-2-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently the remote memcg charging API consists of two functions:
memalloc_use_memcg() and memalloc_unuse_memcg(), which set and clear the
memcg value, which overwrites the memcg of the current task.
memalloc_use_memcg(target_memcg);
<...>
memalloc_unuse_memcg();
It works perfectly for allocations performed from a normal context,
however an attempt to call it from an interrupt context or just nest two
remote charging blocks will lead to an incorrect accounting. On exit from
the inner block the active memcg will be cleared instead of being
restored.
memalloc_use_memcg(target_memcg);
memalloc_use_memcg(target_memcg_2);
<...>
memalloc_unuse_memcg();
Error: allocation here are charged to the memcg of the current
process instead of target_memcg.
memalloc_unuse_memcg();
This patch extends the remote charging API by switching to a single
function: struct mem_cgroup *set_active_memcg(struct mem_cgroup *memcg),
which sets the new value and returns the old one. So a remote charging
block will look like:
old_memcg = set_active_memcg(target_memcg);
<...>
set_active_memcg(old_memcg);
This patch is heavily based on the patch by Johannes Weiner, which can be
found here: https://lkml.org/lkml/2020/5/28/806 .
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Schatzberg <dschatzberg@fb.com>
Link: https://lkml.kernel.org/r/20200821212056.3769116-1-guro@fb.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix linkage error when CONFIG_BINFMT_ELF is selected but CONFIG_COREDUMP
is not:
ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_phdrs':
elfcore.c:(.text+0x172): undefined reference to `dump_emit'
ia64-linux-ld: arch/ia64/kernel/elfcore.o: in function `elf_core_write_extra_data':
elfcore.c:(.text+0x2b2): undefined reference to `dump_emit'
Fixes: 1fcccbac89f5 ("elf coredump: replace ELF_CORE_EXTRA_* macros by functions")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200819064146.12529-1-krzk@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
Juergen Gross
Bartosz Golaszewski
Eryk Brol
Tian Tao
Christoph Hellwig
Matthew Wilcox (Oracle)
Minchan Kim
John Hubbard
Jann Horn
Liam R. Howlett
Miaohe Lin
Joonsoo Kim
Roman Gushchin
Krzysztof Kozlowski