| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The number of CNS bits in the command is specific to the nvme spec
version compliance. The existing check is not sufficient for possible
CNS values the driver uses that may create confusion between host and
device, so enhance the check to consider the version and desired CNS
value.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The barrier_nospec() after the array bounds check is overkill and
painfully slow for arches which implement it.
Furthermore, most arches don't implement it, so they remain exposed to
Spectre v1 (which can affect pretty much any CPU with branch
prediction).
Instead, clamp the user pointer to a valid range so it's guaranteed to
be a valid array index even when the bounds check mispredicts.
Fixes: 8270cb10c068 ("cdrom: Fix spectre-v1 gadget")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/1d86f4d9d8fba68e5ca64cdeac2451b95a8bf872.1729202937.git.jpoimboe@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In raid10_run() if raid10_set_queue_limits() succeed, the return value
is set to zero, and if following procedures failed raid10_run() will
return zero while mddev->private is still NULL, causing null ptr
dereference in raid10_size().
Fix the problem by only overwrite the return value if
raid10_set_queue_limits() failed.
Fixes: 3d8466ba68d4 ("md/raid10: use the atomic queue limit update APIs")
Cc: stable@vger.kernel.org
Reported-and-tested-by: ValdikSS <iam@valdikss.org.ru>
Closes: https://lore.kernel.org/all/0dd96820-fe52-4841-bc58-dbf14d6bfcc8@valdikss.org.ru/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241009014914.1682037-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
When a flush is issued to an RAID array, a child flush IO is created and
issued for each member disk in the RAID array. Since commit b75197e86e6d
("md: Remove flush handling"), each child flush IO has been chained with
the original bio. As a result, the failure of any child IO could modify
the bi_status of the original bio, potentially impacting the upper-layer
filesystem.
Fix the issue by preventing child flush IO from altering the original
bio->bi_status as before. However, this design introduces a known
issue: in the event of a power failure, if a flush IO on a member
disk fails, the upper layers may not be informed. This issue is not easy
to fix and will not be addressed for the time being in this issue.
Fixes: b75197e86e6d ("md: Remove flush handling")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240919063048.2887579-1-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
|
|
We no more need acquiring ctrl->lock before accessing the
NVMe controller state and instead we can now use the helper
nvme_ctrl_state. So replace the use of ctrl->lock from
nvme_keep_alive_finish function with nvme_ctrl_state call.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
The nvme keep-alive operation, which executes at a periodic interval,
could potentially sneak in while shutting down a fabric controller.
This may lead to a race between the fabric controller admin queue
destroy code path (invoked while shutting down controller) and hw/hctx
queue dispatcher called from the nvme keep-alive async request queuing
operation. This race could lead to the kernel crash shown below:
Call Trace:
autoremove_wake_function+0x0/0xbc (unreliable)
__blk_mq_sched_dispatch_requests+0x114/0x24c
blk_mq_sched_dispatch_requests+0x44/0x84
blk_mq_run_hw_queue+0x140/0x220
nvme_keep_alive_work+0xc8/0x19c [nvme_core]
process_one_work+0x200/0x4e0
worker_thread+0x340/0x504
kthread+0x138/0x140
start_kernel_thread+0x14/0x18
While shutting down fabric controller, if nvme keep-alive request sneaks
in then it would be flushed off. The nvme_keep_alive_end_io function is
then invoked to handle the end of the keep-alive operation which
decrements the admin->q_usage_counter and assuming this is the last/only
request in the admin queue then the admin->q_usage_counter becomes zero.
If that happens then blk-mq destroy queue operation (blk_mq_destroy_
queue()) which could be potentially running simultaneously on another
cpu (as this is the controller shutdown code path) would forward
progress and deletes the admin queue. So, now from this point onward
we are not supposed to access the admin queue resources. However the
issue here's that the nvme keep-alive thread running hw/hctx queue
dispatch operation hasn't yet finished its work and so it could still
potentially access the admin queue resource while the admin queue had
been already deleted and that causes the above crash.
This fix helps avoid the observed crash by implementing keep-alive as a
synchronous operation so that we decrement admin->q_usage_counter only
after keep-alive command finished its execution and returns the command
status back up to its caller (blk_execute_rq()). This would ensure that
fabric shutdown code path doesn't destroy the fabric admin queue until
keep-alive request finished execution and also keep-alive thread is not
running hw/hctx queue dispatch operation.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
While shutting down loop controller, we first quiesce the admin/IO queue,
delete the admin/IO tag-set and then at last destroy the admin/IO queue.
However it's quite possible that during the window between quiescing and
destroying of the admin/IO queue, some admin/IO request might sneak in
and if that happens then we could potentially encounter a hung task
because shutdown operation can't forward progress until any pending I/O
is flushed off.
This commit helps ensure that before destroying the admin/IO queue, we
unquiesce the admin/IO queue so that any outstanding requests, which are
added after the admin/IO queue is quiesced, are now flushed to its
completion.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
nvme_dev_disable() modifies the dev->online_queues field, therefore
nvme_pci_update_nr_queues() should avoid racing against it, otherwise
we could end up passing invalid values to blk_mq_update_nr_hw_queues().
WARNING: CPU: 39 PID: 61303 at drivers/pci/msi/api.c:347
pci_irq_get_affinity+0x187/0x210
Workqueue: nvme-reset-wq nvme_reset_work [nvme]
RIP: 0010:pci_irq_get_affinity+0x187/0x210
Call Trace:
<TASK>
? blk_mq_pci_map_queues+0x87/0x3c0
? pci_irq_get_affinity+0x187/0x210
blk_mq_pci_map_queues+0x87/0x3c0
nvme_pci_map_queues+0x189/0x460 [nvme]
blk_mq_update_nr_hw_queues+0x2a/0x40
nvme_reset_work+0x1be/0x2a0 [nvme]
Fix the bug by locking the shutdown_lock mutex before using
dev->online_queues. Give up if nvme_dev_disable() is running or if
it has been executed already.
Fixes: 949928c1c731 ("NVMe: Fix possible queue use after freed")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
UBLK_F_USER_COPY requires userspace to call write() on ublk char
device for filling request buffer, and unprivileged device can't
be trusted.
So don't allow user copy for unprivileged device.
Cc: stable@vger.kernel.org
Fixes: 1172d5b8beca ("ublk: support user copy")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241016134847.2911721-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We're seeing crashes from rq_qos_wake_function that look like this:
BUG: unable to handle page fault for address: ffffafe180a40084
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 100000067 P4D 100000067 PUD 10027c067 PMD 10115d067 PTE 0
Oops: Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 17 UID: 0 PID: 0 Comm: swapper/17 Not tainted 6.12.0-rc3-00013-geca631b8fe80 #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:_raw_spin_lock_irqsave+0x1d/0x40
Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 54 9c 41 5c fa 65 ff 05 62 97 30 4c 31 c0 ba 01 00 00 00 <f0> 0f b1 17 75 0a 4c 89 e0 41 5c c3 cc cc cc cc 89 c6 e8 2c 0b 00
RSP: 0018:ffffafe180580ca0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffffafe180a3f7a8 RCX: 0000000000000011
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffffafe180a40084
RBP: 0000000000000000 R08: 00000000001e7240 R09: 0000000000000011
R10: 0000000000000028 R11: 0000000000000888 R12: 0000000000000002
R13: ffffafe180a40084 R14: 0000000000000000 R15: 0000000000000003
FS: 0000000000000000(0000) GS:ffff9aaf1f280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffafe180a40084 CR3: 000000010e428002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
try_to_wake_up+0x5a/0x6a0
rq_qos_wake_function+0x71/0x80
__wake_up_common+0x75/0xa0
__wake_up+0x36/0x60
scale_up.part.0+0x50/0x110
wb_timer_fn+0x227/0x450
...
So rq_qos_wake_function() calls wake_up_process(data->task), which calls
try_to_wake_up(), which faults in raw_spin_lock_irqsave(&p->pi_lock).
p comes from data->task, and data comes from the waitqueue entry, which
is stored on the waiter's stack in rq_qos_wait(). Analyzing the core
dump with drgn, I found that the waiter had already woken up and moved
on to a completely unrelated code path, clobbering what was previously
data->task. Meanwhile, the waker was passing the clobbered garbage in
data->task to wake_up_process(), leading to the crash.
What's happening is that in between rq_qos_wake_function() deleting the
waitqueue entry and calling wake_up_process(), rq_qos_wait() is finding
that it already got a token and returning. The race looks like this:
rq_qos_wait() rq_qos_wake_function()
==============================================================
prepare_to_wait_exclusive()
data->got_token = true;
list_del_init(&curr->entry);
if (data.got_token)
break;
finish_wait(&rqw->wait, &data.wq);
^- returns immediately because
list_empty_careful(&wq_entry->entry)
is true
... return, go do something else ...
wake_up_process(data->task)
(NO LONGER VALID!)-^
Normally, finish_wait() is supposed to synchronize against the waker.
But, as noted above, it is returning immediately because the waitqueue
entry has already been removed from the waitqueue.
The bug is that rq_qos_wake_function() is accessing the waitqueue entry
AFTER deleting it. Note that autoremove_wake_function() wakes the waiter
and THEN deletes the waitqueue entry, which is the proper order.
Fix it by swapping the order. We also need to use
list_del_init_careful() to match the list_empty_careful() in
finish_wait().
Fixes: 38cfb5a45ee0 ("blk-wbt: improve waking of tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/d3bee2463a67b1ee597211823bf7ad3721c26e41.1729014591.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need to suppress the partition scan from occuring within the
controller's scan_work context. If a path error occurs here, the IO will
wait until a path becomes available or all paths are torn down, but that
action also occurs within scan_work, so it would deadlock. Defer the
partion scan to a different context that does not block scan_work.
Reported-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Commit 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
needs to check queue mapping via tag set in hctx's cpuhp handler.
However, q->tag_set may not be setup yet when the cpuhp handler is
enabled, then kernel oops is triggered.
Fix the issue by setup queue tag_set before initializing hctx.
Cc: stable@vger.kernel.org
Reported-and-tested-by: Rick Koch <mr.rickkoch@gmail.com>
Closes: https://lore.kernel.org/linux-block/CANa58eeNDozLaBHKPLxSAhEy__FPfJT_F71W=sEQw49UCrC9PQ@mail.gmail.com
Fixes: 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20241014005115.2699642-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit e4eb37cc0f3ed ("block: Remove elevator required features")
removed the usage of `struct request_queue` from elevator_find_get(),
but didn't removed the argument.
Remove the "struct request_queue *q" argument from elevator_find_get()
given it is useless.
Fixes: e4eb37cc0f3e ("block: Remove elevator required features")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011155615.3361143-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Whenever an I/O elevator is changed, the system attempts to load a
module for the new elevator. This occurs regardless of whether the
elevator is already loaded or built directly into the kernel. This
behavior introduces unnecessary overhead and potential issues.
This makes the operation slower, and more error-prone. For instance,
making the problem fixed by [1] visible for users that doesn't even rely
on modules being available through modules.
Do not try to load the ioscheduler if it is already visible.
This change brings two main benefits: it improves the performance of
elevator changes, and it reduces the likelihood of errors occurring
during this process.
[1] Commit e3accac1a976 ("block: Fix elv_iosched_local_module handling of "none" scheduler")
Fixes: 734e1a860312 ("block: Prevent deadlocks when switching elevators")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20241011170122.3880087-1-leitao@debian.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
conn_lowest_minor() last use was removed by 2011 commit
69a227731a37 ("drbd: Pass a peer device to a number of fuctions")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241010204426.277535-1-linux@treblig.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Disable NVME_CC_CRIME so that CSTS.RDY indicates that the media
is ready and able to handle commands without returning
NVME_SC_ADMIN_COMMAND_MEDIA_NOT_READY.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
We can use sbitmap to manage all the nvmet_rdma_rsp instead of using
free lists and spinlock, and we can use an additional tag to
determine whether the nvmet_rdma_rsp is extra allocated.
In addition, performance has improved:
1. testing environment is local rxe rdma devie and mem-based
backstore device.
2. fio command, test the average 5 times:
fio -filename=/dev/nvme0n1 --ioengine=libaio -direct=1
-size=1G -name=1 -thread -runtime=60 -time_based -rw=read -numjobs=16
-iodepth=128 -bs=4k -group_reporting
3. Before: 241k IOPS, After: 256k IOPS, an increase of about 5%.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
|
|
elevator_get_default() and elv_support_iosched() both check for whether
or not q->tag_set is non-NULL, however it's not possible for them to be
NULL. This messes up some static checkers, as the checking of tag_set
isn't consistent.
Remove the checks, which both simplifies the logic and avoids checker
errors.
Signed-off-by: SurajSonawane2415 <surajsonawane0215@gmail.com>
Link: https://lore.kernel.org/r/20241007111416.13814-1-surajsonawane0215@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Commit 76d54bf20cdc ("nvme-tcp: don't access released socket during
error recovery") added a mutex_lock() call for the queue->queue_lock
in nvme_tcp_get_address(). However, the mutex_lock() races with
mutex_destroy() in nvme_tcp_free_queue(), and causes the WARN below.
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 3 PID: 34077 at kernel/locking/mutex.c:587 __mutex_lock+0xcf0/0x1220
Modules linked in: nvmet_tcp nvmet nvme_tcp nvme_fabrics iw_cm ib_cm ib_core pktcdvd nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables qrtr sunrpc ppdev 9pnet_virtio 9pnet pcspkr netfs parport_pc parport e1000 i2c_piix4 i2c_smbus loop fuse nfnetlink zram bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper xfs drm sym53c8xx floppy nvme scsi_transport_spi nvme_core nvme_auth serio_raw ata_generic pata_acpi dm_multipath qemu_fw_cfg [last unloaded: ib_uverbs]
CPU: 3 UID: 0 PID: 34077 Comm: udisksd Not tainted 6.11.0-rc7 #319
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:__mutex_lock+0xcf0/0x1220
Code: 08 84 d2 0f 85 c8 04 00 00 8b 15 ef b6 c8 01 85 d2 0f 85 78 f4 ff ff 48 c7 c6 20 93 ee af 48 c7 c7 60 91 ee af e8 f0 a7 6d fd <0f> 0b e9 5e f4 ff ff 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1
RSP: 0018:ffff88811305f760 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88812c652058 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000001
RBP: ffff88811305f8b0 R08: 0000000000000001 R09: ffffed1075c36341
R10: ffff8883ae1b1a0b R11: 0000000000010498 R12: 0000000000000000
R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88812c652058
FS: 00007f9713ae4980(0000) GS:ffff8883ae180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fcd78483c7c CR3: 0000000122c38000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? __warn.cold+0x5b/0x1af
? __mutex_lock+0xcf0/0x1220
? report_bug+0x1ec/0x390
? handle_bug+0x3c/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? __mutex_lock+0xcf0/0x1220
? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
? __pfx___mutex_lock+0x10/0x10
? __lock_acquire+0xd6a/0x59e0
? nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
nvme_tcp_get_address+0xc2/0x1e0 [nvme_tcp]
? __pfx_nvme_tcp_get_address+0x10/0x10 [nvme_tcp]
nvme_sysfs_show_address+0x81/0xc0 [nvme_core]
dev_attr_show+0x42/0x80
? __asan_memset+0x1f/0x40
sysfs_kf_seq_show+0x1f0/0x370
seq_read_iter+0x2cb/0x1130
? rw_verify_area+0x3b1/0x590
? __mutex_lock+0x433/0x1220
vfs_read+0x6a6/0xa20
? lockdep_hardirqs_on+0x78/0x100
? __pfx_vfs_read+0x10/0x10
ksys_read+0xf7/0x1d0
? __pfx_ksys_read+0x10/0x10
? __x64_sys_openat+0x105/0x1d0
do_syscall_64+0x93/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? __pfx_ksys_read+0x10/0x10
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on_prepare+0x16d/0x400
? do_syscall_64+0x9f/0x180
? lockdep_hardirqs_on+0x78/0x100
? do_syscall_64+0x9f/0x180
? do_syscall_64+0x9f/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f9713f55cfa
Code: 55 48 89 e5 48 83 ec 20 48 89 55 e8 48 89 75 f0 89 7d f8 e8 e8 74 f8 ff 48 8b 55 e8 48 8b 75 f0 41 89 c0 8b 7d f8 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 2e 44 89 c7 48 89 45 f8 e8 42 75 f8 ff 48 8b
RSP: 002b:00007ffd7f512e70 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 000055c38f316859 RCX: 00007f9713f55cfa
RDX: 0000000000000fff RSI: 00007ffd7f512eb0 RDI: 0000000000000011
RBP: 00007ffd7f512e90 R08: 0000000000000000 R09: 00000000ffffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000055c38f317148
R13: 0000000000000000 R14: 00007f96f4004f30 R15: 000055c3b6b623c0
</TASK>
The WARN is observed when the blktests test case nvme/014 is repeated
with tcp transport. It is rare, and 200 times repeat is required to
recreate in some test environments.
To avoid the WARN, check the NVME_TCP_Q_LIVE flag before locking
queue->queue_lock. The flag is cleared long time before the lock gets
destroyed.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
For fixing CVE-2023-6270, f98364e92662 ("aoe: fix the potential
use-after-free problem in aoecmd_cfg_pkts") makes tx() calling dev_put()
instead of doing in aoecmd_cfg_pkts(). It avoids that the tx() runs
into use-after-free.
Then Nicolai Stange found more places in aoe have potential use-after-free
problem with tx(). e.g. revalidate(), aoecmd_ata_rw(), resend(), probe()
and aoecmd_cfg_rsp(). Those functions also use aoenet_xmit() to push
packet to tx queue. So they should also use dev_hold() to increase the
refcnt of skb->dev.
On the other hand, moving dev_put() to tx() causes that the refcnt of
skb->dev be reduced to a negative value, because corresponding
dev_hold() are not called in revalidate(), aoecmd_ata_rw(), resend(),
probe(), and aoecmd_cfg_rsp(). This patch fixed this issue.
Cc: stable@vger.kernel.org
Link: https://nvd.nist.gov/vuln/detail/CVE-2023-6270
Fixes: f98364e92662 ("aoe: fix the potential use-after-free problem in aoecmd_cfg_pkts")
Reported-by: Nicolai Stange <nstange@suse.com>
Signed-off-by: Chun-Yi Lee <jlee@suse.com>
Link: https://lore.kernel.org/stable/20240624064418.27043-1-jlee%40suse.com
Link: https://lore.kernel.org/r/20241002035458.24401-1-jlee@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
These are called from blkcg_print_blkgs() which already disables IRQs so
disabling it again is wrong. It means that IRQs will be enabled slightly
earlier than intended, however, so far as I can see, this bug is harmless.
Fixes: 35198e323001 ("blk-iocost: read params inside lock in sysfs apis")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/Zv0kudA9xyGdaA4g@stanley.mountain
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the documentation to match the new function signature.
Fixes: 76c313f658d2752 ("blk-integrity: improved sg segment mapping")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240922141800.3622319-1-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When nvme passthru is configured using loop target, the clear_ids
attribute is, by default, set to true. This attribute would ensure that
EUID/NGUID/UUID is cleared for the loop passthru target.
The newer NVMe disk supporting the NVMe spec 1.3 or higher, typically,
implements the support for "Namespace Identification Descriptor list"
command. This command when issued from host returns EUID/NGUID/UUID
assigned to the inquired namespace. Not clearing these values, while
using nvme passthru using loop target, would result in NVMe host driver
rejecting the namespace. This check was implemented in the commit
2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique").
The fix implemented in this commit ensure that when host issues ns-id
descriptor list command, the EUID/NGUID/UUID are cleared by passthru
target. In fact, the function nvmet_passthru_override_id_descs() which
clears those unique ids already exits, so we just need to ensure that
ns-id descriptor list command falls through the corretc code path. And
while we're at it, we also combines the three passthru admin command
cases together which shares the same code.
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
|
|
The cpu_emergency_register_virt_callback() function is used
unconditionally by the x86 kvm code, but it is declared (and defined)
conditionally:
#if IS_ENABLED(CONFIG_KVM_INTEL) || IS_ENABLED(CONFIG_KVM_AMD)
void cpu_emergency_register_virt_callback(cpu_emergency_virt_cb *callback);
...
leading to a build error when neither KVM_INTEL nor KVM_AMD support is
enabled:
arch/x86/kvm/x86.c: In function ‘kvm_arch_enable_virtualization’:
arch/x86/kvm/x86.c:12517:9: error: implicit declaration of function ‘cpu_emergency_register_virt_callback’ [-Wimplicit-function-declaration]
12517 | cpu_emergency_register_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/x86/kvm/x86.c: In function ‘kvm_arch_disable_virtualization’:
arch/x86/kvm/x86.c:12522:9: error: implicit declaration of function ‘cpu_emergency_unregister_virt_callback’ [-Wimplicit-function-declaration]
12522 | cpu_emergency_unregister_virt_callback(kvm_x86_ops.emergency_disable_virtualization_cpu);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix the build by defining empty helper functions the same way the old
cpu_emergency_disable_virtualization() function was dealt with for the
same situation.
Maybe we could instead have made the call sites conditional, since the
callers (kvm_arch_{en,dis}able_virtualization()) have an empty weak
fallback. I'll leave that to the kvm people to argue about, this at
least gets the build going for that particular config.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Chao Gao <chao.gao@intel.com>
Cc: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The isomorphism neg_if_exp negates the test of a ?: conditional,
making it unnecessary to have an explicit case for a negated test
with the branches inverted.
At the same time, we can disable neg_if_exp in cases where a
different API function may be more suitable for a negated test.
Finally, in the non-patch cases, E matches an expression with
parentheses around it, so there is no need to mention ()
explicitly in the pattern. The () are still needed in the patch
cases, because we want to drop them, if they are present.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
The parentheses are only needed if there is a disjunction, ie a
set of possible changes. If there is only one pattern, we can
remove these parentheses. Just like the format:
- x
+ y
not:
(
- x
+ y
)
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_yes_no()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_on_off()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_write_read()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_read_write()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_enable{d}_
disable{d}() to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_lo{w}_hi{gh}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As other rules done, we add rules for str_hi{gh}_lo{w}()
to check the relative opportunities.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
As done with str_true_false(), add checks for str_false_true()
opportunities. A simple test can find over 9 cases currently
exist in the tree.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
After str_true_false() has been introduced in the tree,
we can add rules for finding places where str_true_false()
can be used. A simple test can find over 10 locations.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
if an inode backpointer points to a dirent that doesn't point back,
that's an error we should warn about.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If the reader acquires the read lock and then the writer enters the slow
path, while the reader proceeds to the unlock path, the following scenario
can occur without the change:
writer: pcpu_read_count(lock) return 1 (so __do_six_trylock will return 0)
reader: this_cpu_dec(*lock->readers)
reader: smp_mb()
reader: state = atomic_read(&lock->state) (there is no waiting flag set)
writer: six_set_bitmask()
then the writer will sleep forever.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If we shut down successfully, there shouldn't be any logged ops to
resume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Add a filesystem flag to indicate whether we did a clean recovery -
using c->sb.clean after we've got rw is incorrect, since c->sb is
updated whenever we write the superblock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We had a bug where disk accounting keys didn't always have their version
field set in journal replay; change the BUG_ON() to a WARN(), and
exclude this case since it's now checked for elsewhere (in the bkey
validate function).
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This was added to avoid double-counting accounting keys in journal
replay. But applied incorrectly (easily done since it applies to the
transaction commit, not a particular update), it leads to skipping
in-mem accounting for real accounting updates, and failure to give them
a version number - which leads to journal replay becoming very confused
the next time around.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
give bversions a more distinct name, to aid in grepping
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Previously, check_inode() would delete unlinked inodes if they weren't
on the deleted list - this code dating from before there was a deleted
list.
But, if we crash during a logged op (truncate or finsert/fcollapse) of
an unlinked file, logged op resume will get confused if the inode has
already been deleted - instead, just add it to the deleted list if it
needs to be there; delete_dead_inodes runs after logged op resume.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
BCH_SB_ERRS() has a field for the actual enum val so that we can reorder
to reorganize, but the way BCH_SB_ERR_MAX was defined didn't allow for
this.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
__bch2_fsck_err() warns if the current task has a btree_trans object and
it wasn't passed in, because if it has to prompt for user input it has
to be able to unlock it.
But plumbing the btree_trans through bkey_validate(), as well as
transaction restarts, is problematic - so instead make bkey fsck errors
FSCK_AUTOFIX, which doesn't need to warn.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
Keith Busch
Josh Poimboeuf
Yu Kuai
Li Nan
Nilay Shroff
Maurizio Lombardi
Ming Lei
Omar Sandoval
Breno Leitao
Dr. David Alan Gilbert
Greg Joyce
Tokunori Ikegami
Guixin Liu
SurajSonawane2415
Hannes Reinecke
Chun-Yi Lee
Dan Carpenter
Linus Torvalds
Julia Lawall
Hongbo Li
Kent Overstreet
Alan Huang