aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2021-07-10rtc: pcf2127: handle timestamp interruptsMian Yousaf Kaukab1-59/+133
commit 03623b4b041c ("rtc: pcf2127: add tamper detection support") added support for timestamp interrupts. However they are not being handled in the irq handler. If a timestamp interrupt occurs it results in kernel disabling the interrupt and displaying the call trace: [ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option) ... [ 121.238087] [<00000000c4d69393>] irq_default_primary_handler threaded [<000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127] [ 121.248971] Disabling IRQ #78 Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp before clearing TSF1 and TSF2 flags so that it can't be overwritten. Set a flag to mark if the timestamp is valid and only report to sysfs if the flag is set. To mimic the hardware behavior, don’t save another timestamp until the first one has been read by the userspace. However, if the alarm irq is not configured, keep the old way of handling timestamp interrupt in the timestamp0 sysfs calls. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com> Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
2021-07-10rtc: at91sam9: Remove unnecessary offset variable checksNobuhiro Iwamatsu1-1/+1
The offset variable is checked by at91_rtc_readalarm(), but this check is unnecessary because the previous check knew that the value of this variable was not 0. This removes that unnecessary offset variable checks. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210708051340.341345-1-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()Nobuhiro Iwamatsu1-3/+1
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return value, but doesn't use it. This modifies using the s5m_check_peding_alarm_interrupt()"s return value as the s5m_rtc_read_alarm()'s return value. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210708051304.341278-1-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: spear: convert to SPDX identifierNobuhiro Iwamatsu1-4/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-11-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: tps6586x: convert to SPDX identifierNobuhiro Iwamatsu1-14/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-9-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: tps80031: convert to SPDX identifierNobuhiro Iwamatsu1-14/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-8-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: rtd119x: Fix format of SPDX identifierNobuhiro Iwamatsu1-2/+1
For C files, use the C99 format (//). Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-7-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: sc27xx: Fix format of SPDX identifierNobuhiro Iwamatsu1-1/+1
For C files, use the C99 format (//). Cc: Orson Zhai <orsonzhai@gmail.com> Cc: Baolin Wang <baolin.wang7@gmail.com> Cc: Chunyan Zhang <zhang.lyra@gmail.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-6-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: palmas: convert to SPDX identifierNobuhiro Iwamatsu1-14/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-5-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: max6900: convert to SPDX identifierNobuhiro Iwamatsu1-5/+3
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-4-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: ds1374: convert to SPDX identifierNobuhiro Iwamatsu1-5/+2
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-3-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: au1xxx: convert to SPDX identifierNobuhiro Iwamatsu1-4/+1
Use SPDX-License-Identifier instead of a verbose license text. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210707075804.337458-2-nobuhiro1.iwamatsu@toshiba.co.jp
2021-07-10rtc: pcf85063: Update the PCF85063A datasheet revisionFabio Estevam1-1/+1
After updating the datasheet URL, the PCF85063A datasheet revision has changed. Adjust it accordingly. Reported-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210624120953.2313378-1-festevam@gmail.com
2021-07-10dt-bindings: rtc: ti,bq32k: take maintainershipAlexandre Belloni1-1/+1
Take maintainership of the binding as PAvel said he doesn't have the hardware anymore. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Pavel Machek <pavel@ucw.cz> Link: https://lore.kernel.org/r/20210620224030.1115356-1-alexandre.belloni@bootlin.com
2021-06-20rtc: pcf8563: Fix the datasheet URLFabio Estevam1-1/+1
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210603143447.2223353-3-festevam@gmail.com
2021-06-20rtc: pcf85063: Fix the datasheet URLFabio Estevam1-2/+2
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210603143447.2223353-2-festevam@gmail.com
2021-06-20rtc: pcf2127: Fix the datasheet URLFabio Estevam1-1/+1
The current datasheet URL is no longer valid. Replace with a valid one. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210603143447.2223353-1-festevam@gmail.com
2021-06-20dt-bindings: rtc: ti,bq32k: Convert to json-schemaGeert Uytterhoeven2-18/+49
Convert the TI BQ32000 I2C Serial Real-Time Clock Device Tree binding documentation to json-schema. Document missing properties. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/42d9c71b4ee1f120e0cdcf6b266547d29d1fb9a4.1623851377.git.geert+renesas@glider.be
2021-06-20dt-bindings: rtc: rx8900: Convert to YAML schemaMarek Vasut2-22/+49
Convert the Epson RX8900 DT bindings to YAML schema. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: kernel@dh-electronics.com Cc: linux-rtc@vger.kernel.org To: devicetree@vger.kernel.org Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210610150044.29792-1-marex@denx.de
2021-06-20rtc: v3020: remove redundant initialization of variable retvalColin Ian King1-1/+1
The variable retval is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210609120050.185746-1-colin.king@canonical.com
2021-06-20rtc: stm32: Fix unbalanced clk_disable_unprepare() on probe error pathMartin Fuzzey1-2/+4
The STM32MP1 RTC may have 2 clocks, the pclk and the rtc_ck. If clk_prepare_enable() fails for the second clock (rtc_ck) we must only call clk_disable_unprepare() for the first clock (pclk) but currently we call it on both leading to a WARN: [ 15.629568] WARNING: CPU: 0 PID: 146 at drivers/clk/clk.c:958 clk_core_disable+0xb0/0xc8 [ 15.637620] ck_rtc already disabled [ 15.663322] CPU: 0 PID: 146 Comm: systemd-udevd Not tainted 5.4.77-pknbsp-svn5759-atag-v5.4.77-204-gea4235203137-dirty #2413 [ 15.674510] Hardware name: STM32 (Device Tree Support) [ 15.679658] [<c0111148>] (unwind_backtrace) from [<c010c0b8>] (show_stack+0x10/0x14) [ 15.687371] [<c010c0b8>] (show_stack) from [<c0ab3d28>] (dump_stack+0xc0/0xe0) [ 15.694574] [<c0ab3d28>] (dump_stack) from [<c012360c>] (__warn+0xc8/0xf0) [ 15.701428] [<c012360c>] (__warn) from [<c0123694>] (warn_slowpath_fmt+0x60/0x94) [ 15.708894] [<c0123694>] (warn_slowpath_fmt) from [<c053b518>] (clk_core_disable+0xb0/0xc8) [ 15.717230] [<c053b518>] (clk_core_disable) from [<c053c190>] (clk_core_disable_lock+0x18/0x24) [ 15.725924] [<c053c190>] (clk_core_disable_lock) from [<bf0adc44>] (stm32_rtc_probe+0x124/0x5e4 [rtc_stm32]) [ 15.735739] [<bf0adc44>] (stm32_rtc_probe [rtc_stm32]) from [<c05f7d4c>] (platform_drv_probe+0x48/0x98) [ 15.745095] [<c05f7d4c>] (platform_drv_probe) from [<c05f5cec>] (really_probe+0x1f0/0x458) [ 15.753338] [<c05f5cec>] (really_probe) from [<c05f61c4>] (driver_probe_device+0x70/0x1c4) [ 15.761584] [<c05f61c4>] (driver_probe_device) from [<c05f6580>] (device_driver_attach+0x58/0x60) [ 15.770439] [<c05f6580>] (device_driver_attach) from [<c05f6654>] (__driver_attach+0xcc/0x170) [ 15.779032] [<c05f6654>] (__driver_attach) from [<c05f40d8>] (bus_for_each_dev+0x58/0x7c) [ 15.787191] [<c05f40d8>] (bus_for_each_dev) from [<c05f4ffc>] (bus_add_driver+0xdc/0x1f8) [ 15.795352] [<c05f4ffc>] (bus_add_driver) from [<c05f6ed8>] (driver_register+0x7c/0x110) [ 15.803425] [<c05f6ed8>] (driver_register) from [<c01027bc>] (do_one_initcall+0x70/0x1b8) [ 15.811588] [<c01027bc>] (do_one_initcall) from [<c01a1094>] (do_init_module+0x58/0x1f8) [ 15.819660] [<c01a1094>] (do_init_module) from [<c01a0074>] (load_module+0x1e58/0x23c8) [ 15.827646] [<c01a0074>] (load_module) from [<c01a0860>] (sys_finit_module+0xa0/0xd4) [ 15.835459] [<c01a0860>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20) Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver") Cc: stable@vger.kernel.org Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1623087421-19722-1-git-send-email-martin.fuzzey@flowbird.group
2021-06-20rtc: bd70528: Drop BD70528 supportMatti Vaittinen2-309/+14
The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210527105819.GA3111334@localhost.localdomain
2021-06-20rtc: max77686: Do not enforce (incorrect) interrupt trigger typeKrzysztof Kozlowski1-2/+2
Interrupt line can be configured on different hardware in different way, even inverted. Therefore driver should not enforce specific trigger type - edge falling - but instead rely on Devicetree to configure it. The Maxim 77686 datasheet describes the interrupt line as active low with a requirement of acknowledge from the CPU therefore the edge falling is not correct. The interrupt line is shared between PMIC and RTC driver, so using level sensitive interrupt is here especially important to avoid races. With an edge configuration in case if first PMIC signals interrupt followed shortly after by the RTC, the interrupt might not be yet cleared/acked thus the second one would not be noticed. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210526172036.183223-6-krzysztof.kozlowski@canonical.com
2021-06-20rtc: m41t80: correct kerneldoc function namesYang Yingliang1-12/+8
Fix the following make W=1 kernel build warnings: drivers/rtc/rtc-m41t80.c:811: warning: expecting prototype for wdt_close(). Prototype was for wdt_release() instead drivers/rtc/rtc-m41t80.c:830: warning: expecting prototype for notify_sys(). Prototype was for wdt_notify_sys() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210517110641.473386-1-yangyingliang@huawei.com
2021-06-20rtc: sysfs: Correct kerneldoc function name hctosys_show()Yang Yingliang1-1/+1
Fix the following make W=1 kernel build warning: drivers/rtc/sysfs.c:115: warning: expecting prototype for rtc_sysfs_show_hctosys(). Prototype was for hctosys_show() instead Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210517045901.3461800-1-yangyingliang@huawei.com
2021-05-25rtc: imxdi: add wakeup supportMartin Kaiser1-0/+4
The DryIce-based RTC supports alarms that trigger an interrupt. Configure this interrupt as a wakeup source that wakes the system up from standby mode. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210511161244.16111-1-martin@kaiser.cx
2021-05-25rtc: efi: Remove the repeated module aliasShaokun Zhang1-1/+0
'MODULE_ALIAS' is declared twice, cleanup one. Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1621848834-20857-1-git-send-email-zhangshaokun@hisilicon.com
2021-05-25rtc: fix snprintf() checking in is_rtc_hctosys()Dan Carpenter1-2/+2
The scnprintf() function silently truncates the printf() and returns the number bytes that it was able to copy (not counting the NUL terminator). Thus, the highest value it can return here is "NAME_SIZE - 1" and the overflow check is dead code. Fix this by using the snprintf() function which returns the number of bytes that would have been copied if there was enough space and changing the condition from "> NAME_SIZE" to ">= NAME_SIZE". Fixes: 92589c986b33 ("rtc-proc: permit the /proc/driver/rtc device to use other devices") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/YJov/pcGmhLi2pEl@mwanda
2021-05-25dt-bindings: convert rtc/faraday,ftrtc01 to yamlCorentin Labbe2-28/+59
Converts rtc/faraday,ftrtc01.txt to yaml. This permits to detect some missing properties: reg, resets, interrupts Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210510182505.3968936-1-clabbe@baylibre.com
2021-05-25rtc: mxc_v2: add missing MODULE_DEVICE_TABLEBixuan Cui1-0/+1
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Bixuan Cui <cuibixuan@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210508031509.53735-1-cuibixuan@huawei.com
2021-05-25rtc: m41t80: add support for fixed clockSebastian Reichel2-0/+21
Congatec's QMX6 system on module (SoM) uses a m41t62 as RTC. The modules SQW clock output defaults to 32768 Hz. This behaviour is used to provide the i.MX6 CKIL clock. Once the RTC driver is probed, the clock is disabled and all i.MX6 functionality depending on the 32 KHz clock has undefined behaviour. For example when using the hardware watchdog the system will likely do arbitrary reboots. Referencing the m41t62 directly results in a deadlock. The kernel will see, that i.MX6 system clock needs the RTC clock and do probe deferral. But the i.MX6 I2C module never becomes usable without the i.MX6 CKIL clock and thus the RTC's clock will not be probed. So from the kernel's perspective this is a chicken-and-egg problem. Technically everything is fine by not touching anything, since the RTC clock correctly enables the clock on reset (i.e. on battery backup power loss) and also the bootloader enables it in case an something (e.g. an unpatched kernel) disabled this incorrectly. A workaround for this issue is describing the square wave pin as fixed-clock, which is registered early and basically how this pin is used on the i.MX6. Suggested-by: Saravana Kannan <saravanak@google.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Saravana Kannan <saravanak@google.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210428222953.235280-2-sebastian.reichel@collabora.com
2021-05-25rtc: bd70528: fix BD71815 watchdog dependencyArnd Bergmann1-1/+2
The added Kconfig dependency is slightly incorrect, which can lead to a link failure when the watchdog is a loadable module: arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_rtc_based_timers': rtc-bd70528.c:(.text+0x6cc): undefined reference to `bd70528_wdt_set' arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_set_time': rtc-bd70528.c:(.text+0xaa0): undefined reference to `bd70528_wdt_lock' arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0xab8): undefined reference to `bd70528_wdt_unlock' arm-linux-gnueabi-ld: drivers/rtc/rtc-bd70528.o: in function `bd70528_alm_enable': rtc-bd70528.c:(.text+0xfc0): undefined reference to `bd70528_wdt_lock' arm-linux-gnueabi-ld: rtc-bd70528.c:(.text+0x1030): undefined reference to `bd70528_wdt_unlock' The problem is that it allows to be built-in if MFD_ROHM_BD71828 is built-in, even when the watchdog is a loadable module. Rework this so that having the watchdog as a loadable module always forces the rtc to be a module as well instead of built-in, regardless of bd71828. Fixes: c56dc069f268 ("rtc: bd70528: Support RTC on ROHM BD71815") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210422151545.2403356-1-arnd@kernel.org
2021-05-09Linux 5.13-rc1Linus Torvalds1-2/+2
2021-05-09fbmem: fix horribly incorrect placement of __maybe_unusedLinus Torvalds1-1/+1
Commit b9d79e4ca4ff ("fbmem: Mark proc_fb_seq_ops as __maybe_unused") places the '__maybe_unused' in an entirely incorrect location between the "struct" keyword and the structure name. It's a wonder that gcc accepts that silently, but clang quite reasonably warns about it: drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes] static const struct __maybe_unused seq_operations proc_fb_seq_ops = { ^ Fix it. Cc: Guenter Roeck <linux@roeck-us.net> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-08Revert "bio: limit bio max size"Jens Axboe4-21/+3
This reverts commit cd2c7545ae1beac3b6aae033c7f31193b3255946. Alex reports that the commit causes corruption with LUKS on ext4. Revert it for now so that this can be investigated properly. Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/ Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-08drm/i915/display: fix compiler warning about array overrunLinus Torvalds1-1/+12
intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event Status Indicator data, but then passes that buffer at offset 10 off as an argument to drm_dp_channel_eq_ok(). End result: there are only 4 bytes remaining of the buffer, yet drm_dp_channel_eq_ok() wants a 6-byte buffer. gcc-11 correctly warns about this case: drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’: drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread] 3491 | !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’} In file included from drivers/gpu/drm/i915/display/intel_dp.c:38: include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’ 1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE], | ^~~~~~~~~~~~~~~~~~~~ 6:14 elapsed This commit just extends the original array by 2 zero-initialized bytes, avoiding the warning. There may be some underlying bug in here that caused this confusion, but this is at least no worse than the existing situation that could use random data off the stack. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-08smb3: if max_channels set to more than one channel request multichannelSteve French1-0/+3
Mounting with "multichannel" is obviously implied if user requested more than one channel on mount (ie mount parm max_channels>1). Currently both have to be specified. Fix that so that if max_channels is greater than 1 on mount, enable multichannel rather than silently falling back to non-multichannel. Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-By: Tom Talpey <tom@talpey.com> Cc: <stable@vger.kernel.org> # v5.11+ Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
2021-05-08smb3: do not attempt multichannel to server which does not support itSteve French1-0/+6
We were ignoring CAP_MULTI_CHANNEL in the server response - if the server doesn't support multichannel we should not be attempting it. See MS-SMB2 section 3.2.5.2 Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Reviewed-By: Tom Talpey <tom@talpey.com> Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Steve French <stfrench@microsoft.com>
2021-05-08smb3: when mounting with multichannel include it in requested capabilitiesSteve French1-0/+5
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to advertise CAP_MULTICHANNEL capability when establishing multiple channels has been requested by the user doing the mount. See MS-SMB2 sections 2.2.3 and 3.2.5.2 Without setting it there is some risk that multichannel could fail if the server interpreted the field strictly. Reviewed-By: Tom Talpey <tom@talpey.com> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Cc: <stable@vger.kernel.org> # v5.8+ Signed-off-by: Steve French <stfrench@microsoft.com>
2021-05-09linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>Masahiro Yamada3-6/+5
<linux/kconfig.h> is included from all the kernel-space source files, including C, assembly, linker scripts. It is intended to contain a minimal set of macros to evaluate CONFIG options. IF_ENABLED() is an intruder here because (x ? y : z) is C code, which should not be included from assembly files or linker scripts. Also, <linux/kconfig.h> is no longer self-contained because NULL is defined in <linux/stddef.h>. Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF() takes the general boolean expression instead of a CONFIG option so that it fits better in <linux/kernel.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org>
2021-05-07atm: firestream: Use fallthrough pseudo-keywordWei Ming Chen1-0/+1
Add pseudo-keyword macro fallthrough[1] [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210507123843.10602-1-jj251510319013@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-07net: stmmac: Do not enable RX FIFO overflow interruptsYannick Vignon2-18/+3
The RX FIFO overflows when the system is not able to process all received packets and they start accumulating (first in the DMA queue in memory, then in the FIFO). An interrupt is then raised for each overflowing packet and handled in stmmac_interrupt(). This is counter-productive, since it brings the system (or more likely, one CPU core) to its knees to process the FIFO overflow interrupts. stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr into the corresponding hardware register (according to the MAC spec, this has the effect of restarting the MAC DMA). However, without freeing any rx descriptors, the DMA stops right away, and another overflow interrupt is raised as the FIFO overflows again. Since the DMA is already restarted at the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO overflow interrupts and the corresponding handling code has no side effect, and eliminates the interrupt storm when the RX FIFO overflows. Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-07mptcp: fix splat when closing unaccepted socketPaolo Abeni1-2/+1
If userspace exits before calling accept() on a listener that had at least one new connection ready, we get: Attempt to release TCP socket in state 8 This happens because the mptcp socket gets cloned when the TCP connection is ready, but the socket is never exposed to userspace. The client additionally sends a DATA_FIN, which brings connection into CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup in mptcp_sock_destruct() from doing its job. Fixes: 3721b9b64676b ("mptcp: Track received DATA_FIN sequence number and add related helpers") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185 Tested-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-07i40e: Remove LLDP frame filtersArkadiusz Kubalewski3-44/+0
Remove filters from being setup in case of software DCB and allow the LLDP frames to be properly transmitted to the wire. It is not possible to transmit the LLDP frame out of the port, if they are filtered by control VSI. This prohibits software LLDP agent properly communicate its DCB capabilities to the neighbors. Fixes: 4b208eaa8078 ("i40e: Add init and default config of software based DCB") Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: Fix PHY type identifiers for 2.5G and 5G adaptersMateusz Palczewski4-11/+10
Unlike other supported adapters, 2.5G and 5G use different PHY type identifiers for reading/writing PHY settings and for reading link status. This commit introduces separate PHY identifiers for these two operation types. Fixes: 2e45d3f4677a ("i40e: Add support for X710 B/P & SFP+ cards") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: fix the restart auto-negotiation after FEC modifiedJaroslaw Gawin1-1/+2
When FEC mode was changed the link didn't know it because the link was not reset and new parameters were not negotiated. Set a flag 'I40E_AQ_PHY_ENABLE_ATOMIC_LINK' in 'abilities' to restart the link and make it run with the new settings. Fixes: 1d96340196f1 ("i40e: Add support FEC configuration for Fortville 25G") Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: Fix use-after-free in i40e_client_subtask()Yunjian Wang1-0/+1
Currently the call to i40e_client_del_instance frees the object pf->cinst, however pf->cinst->lan_info is being accessed after the free. Fix this by adding the missing return. Addresses-Coverity: ("Read from pointer after free") Fixes: 7b0b1a6d0ac9 ("i40e: Disable iWARP VSI PETCP_ENA flag on netdev down events") Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07i40e: fix broken XDP supportMagnus Karlsson1-6/+2
Commit 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") broke XDP support in the i40e driver. That commit was fixing a sparse error in the code by introducing a new variable xdp_res instead of overloading this into the skb pointer. The problem is that the code later uses the skb pointer in if statements and these where not extended to also test for the new xdp_res variable. Fix this by adding the correct tests for xdp_res in these places. The skb pointer was used to store the result of the XDP program by overloading the results in the error pointer ERR_PTR(-result). Therefore, the allocation failure test that used to only test for !skb now need to be extended to also consider !xdp_res. i40e_cleanup_headers() had a check that based on the skb value being an error pointer, i.e. a result from the XDP program != XDP_PASS, and if so start to process a new packet immediately, instead of populating skb fields and sending the skb to the stack. This check is not needed anymore, since we have added an explicit test for xdp_res being set and if so just do continue to pick the next packet from the NIC. Fixes: 12738ac4754e ("i40e: Fix sparse errors in i40e_txrx.c") Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-07netfilter: nftables: avoid potential overflows on 32bit archesEric Dumazet2-7/+10
User space could ask for very large hash tables, we need to make sure our size computations wont overflow. nf_tables_newset() needs to double check the u64 size will fit into size_t field. Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-05-07netfilter: nftables: avoid overflows in nft_hash_buckets()Eric Dumazet1-1/+9
Number of buckets being stored in 32bit variables, we have to ensure that no overflows occur in nft_hash_buckets() syzbot injected a size == 0x40000000 and reported: UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 29539 Comm: syz-executor.4 Not tainted 5.12.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x141/0x1d7 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:327 __roundup_pow_of_two include/linux/log2.h:57 [inline] nft_hash_buckets net/netfilter/nft_set_hash.c:411 [inline] nft_hash_estimate.cold+0x19/0x1e net/netfilter/nft_set_hash.c:652 nft_select_set_ops net/netfilter/nf_tables_api.c:3586 [inline] nf_tables_newset+0xe62/0x3110 net/netfilter/nf_tables_api.c:4322 nfnetlink_rcv_batch+0xa09/0x24b0 net/netfilter/nfnetlink.c:488 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:612 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:630 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 Fixes: 0ed6389c483d ("netfilter: nf_tables: rename set implementations") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.