aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-11-13squashfs: xattr simplificationsAndreas Gruenbacher1-59/+31
Now that the xattr handler is passed to the xattr handler operations, we have access to the attribute name prefix, so simplify the squashfs xattr handlers a bit. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Phillip Lougher <phillip@squashfs.org.uk> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-139p: xattr simplificationsAndreas Gruenbacher9-306/+83
Now that the xattr handler is passed to the xattr handler operations, we can use the same get and set operations for the user, trusted, and security xattr namespaces. In those namespaces, we can access the full attribute name by "reattaching" the name prefix the vfs has skipped for us. Add a xattr_full_name helper to make this obvious in the code. For the "system.posix_acl_access" and "system.posix_acl_default" attributes, handler->prefix is the full attribute name; the suffix is the empty string. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: v9fs-developer@lists.sourceforge.net Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13xattr handlers: Pass handler to operations instead of flagsAndreas Gruenbacher32-226/+306
The xattr_handler operations are currently all passed a file system specific flags value which the operations can use to disambiguate between different handlers; some file systems use that to distinguish the xattr namespace, for example. In some oprations, it would be useful to also have access to the handler prefix. To allow that, pass a pointer to the handler to operations instead of the flags value alone. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13jffs2: Add missing capability check for listing trusted xattrsAndreas Gruenbacher1-0/+3
The vfs checks if a task has the appropriate access for get and set operations, but it cannot do that for the list operation; the file system must check for that itself. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13hfsplus: Remove unused xattr handler list operationsAndreas Gruenbacher4-44/+0
The list operations can never be called; they are even documented to be unused. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13ubifs: Remove unused security xattr handlerAndreas Gruenbacher3-42/+0
Ubifs installs a security xattr handler in sb->s_xattr but doesn't use the generic_{get,set,list,remove}xattr inode operations needed for processing this list of attribute handlers; the handler is never called. Instead, ubifs uses its own xattr handlers which also process security xattrs. Remove the dead code. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by: Richard Weinberger <richard@nod.at> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: linux-mtd@lists.infradead.org Cc: Subodh Nijsure <snijsure@grid-net.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13vfs: Fix the posix_acl_xattr_list return valueAndreas Gruenbacher1-3/+1
When a filesystem that contains POSIX ACLs is mounted without ACL support (-o noacl), the appropriate behavior is not to list any existing POSIX ACL xattrs. The return value for list xattr handlers in this case is 0, not an error code: several filesystems that use the POSIX ACL xattr handlers do not expect the list operation to fail. Symlinks cannot have ACLs, so posix_acl_xattr_list will never be called for symlinks in the first place. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-13vfs: Check attribute names in posix acl xattr handersAndreas Gruenbacher1-0/+4
The get and set operations of the POSIX ACL xattr handlers failed to check the attribute names, so all names with "system.posix_acl_access" or "system.posix_acl_default" as a prefix were accepted. Reject invalid names from now on. Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-12mpt3sas: fix inline markers on non inline function declarationsStephen Rothwell1-2/+2
After merging the scsi tree, today's linux-next build (powerpc allyesconfig) failed like this: In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0: drivers/scsi/mpt3sas/mpt3sas_scsih.c: In function '_scsih_io_done': drivers/scsi/mpt3sas/mpt3sas_base.h:1414:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_get': function body not available mpt3sas_scsi_direct_io_get(struct MPT3SAS_ADAPTER *ioc, u16 smid); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4448:6: error: called from here if (mpt3sas_scsi_direct_io_get(ioc, smid) && ^ In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:59:0: drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here mpt3sas_scsi_direct_io_set(ioc, smid, 0); ^ In file included from drivers/scsi/mpt3sas/mpt3sas_scsih.c:5 9:0: drivers/scsi/mpt3sas/mpt3sas_base.h:1416:1: error: inlining failed in call to always_inline 'mpt3sas_scsi_direct_io_set': function body not available mpt3sas_scsi_direct_io_set(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 direct_io); ^ drivers/scsi/mpt3sas/mpt3sas_scsih.c:4454:3: error: called from here mpt3sas_scsi_direct_io_set(ioc, smid, 0); ^ Presumably caused by commit c84b06a48c4d ("mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-11-12dax: fix __dax_pmd_fault crashDan Williams1-0/+7
Since 4.3 introduced devm_memremap_pages() the pfns handled by DAX may optionally have a struct page backing. When a mapped pfn reaches vmf_insert_pfn_pmd() it fails with a crash signature like the following: kernel BUG at mm/huge_memory.c:905! [..] Call Trace: [<ffffffff812a73ba>] __dax_pmd_fault+0x2ea/0x5b0 [<ffffffffa01a4182>] xfs_filemap_pmd_fault+0x92/0x150 [xfs] [<ffffffff811fbe02>] handle_mm_fault+0x312/0x1b50 Fix this by falling back to 4K mappings in the pfn_valid() case. Longer term, vmf_insert_pfn_pmd() needs to grow support for architectures that can provide a 'pmd_special' capability. Cc: <stable@vger.kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-13Revert "drm/rockchip: Convert the probe function to the generic drm_of_component_probe()"Mark Yao1-6/+75
This reverts commit 52f5eb60940de889ce98a876f6933b574ead3225. Rockchip drm can't work with generic drm_of_component_probe now Signed-off-by: Mark Yao <mark.yao@rock-chips.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-11-13drm: Don't oops in drm_calc_timestamping_constants() if drm_vblank_init() wasn't calledVille Syrjälä1-1/+9
Seems the crtc helpers call drm_calc_timestamping_constants() unconditionally even if the driver didn't initialize vblank support by calling drm_vblank_init(). That used to be OK since the constants were stored under drm_crtc. However I broke this with commit eba1f35dfe14 ("drm: Move timestamping constants into drm_vblank_crtc") when I moved the constants to live inside the drm_vblank_crtc struct instead. If drm_vblank_init() isn't called, we don't allocate these structures, and so drm_calc_timestamping_constants() will oops. Fix it by adding a check into drm_calc_timestamping_constants() to see if vblank support was initialized at all. And to keep in line with other such checks, also toss in a check and warn for the case where vblank support was initialized, but the wrong number of crtcs was specified. Fixes the following sort of oops: BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0 IP: [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm] PGD 0 Oops: 0002 [#1] SMP Modules linked in: sr_mod cdrom mgag200(+) i2c_algo_bit drm_kms_helper ahci syscopyarea sysfillrect sysimgblt libahci fb_sys_fops bnx2x ttm tg3(+) mdio drm ptp sd_mod libata i2c_core pps_core libcrc32c hpsa dm_mirror dm_region_hash dm_log dm_mod CPU: 0 PID: 418 Comm: kworker/0:2 Not tainted 4.3.0+ #1 Hardware name: HP ProLiant DL380 Gen9, BIOS P89 06/09/2015 Workqueue: events work_for_cpu_fn task: ffff88046ca95500 ti: ffff88007830c000 task.ti: ffff88007830c000 RIP: 0010:[<ffffffffa014b266>] [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm] RSP: 0018:ffff88007830f4e8 EFLAGS: 00010246 RAX: 0000000000fe4c00 RBX: ffff88006a849160 RCX: 0000000000000540 RDX: 0000000000000000 RSI: 000000000000fde8 RDI: ffff88006a849000 RBP: ffff88007830f518 R08: ffff88007830c000 R09: 00000001b87e3712 R10: 00000000000050c4 R11: 0000000000000000 R12: 0000000000fe4c00 R13: ffff88006a849000 R14: 0000000000000000 R15: 000000000000fde8 FS: 0000000000000000(0000) GS:ffff88046f800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000b0 CR3: 00000000019d6000 CR4: 00000000001406f0 Stack: ffff88007830f518 ffff88006a849000 ffff880c69b90340 ffff880c69b90000 ffff880c69b90348 ffff880c69b90340 ffff88007830f748 ffffffffa042f7e7 ffff88006a849090 0000000000000000 ffff88006a849160 0000000000000000 Call Trace: [<ffffffffa042f7e7>] drm_crtc_helper_set_mode+0x3d7/0x4b0 [drm_kms_helper] [<ffffffffa04307d4>] drm_crtc_helper_set_config+0x8d4/0xb10 [drm_kms_helper] [<ffffffffa01548d4>] drm_mode_set_config_internal+0x64/0x100 [drm] [<ffffffffa043c342>] drm_fb_helper_pan_display+0xa2/0x280 [drm_kms_helper] [<ffffffff81392c7b>] fb_pan_display+0xbb/0x170 [<ffffffff8138cf70>] bit_update_start+0x20/0x50 [<ffffffff8138b81b>] fbcon_switch+0x39b/0x590 [<ffffffff8140a3d0>] redraw_screen+0x1a0/0x240 [<ffffffff8140b30e>] do_bind_con_driver+0x2ee/0x310 [<ffffffff8140b651>] do_take_over_console+0x141/0x1b0 [<ffffffff81387377>] do_fbcon_takeover+0x57/0xb0 [<ffffffff8138c98b>] fbcon_event_notify+0x60b/0x750 [<ffffffff810a5599>] notifier_call_chain+0x49/0x70 [<ffffffff810a58dd>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff810a5916>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8139282b>] fb_notifier_call_chain+0x1b/0x20 [<ffffffff81394881>] register_framebuffer+0x1f1/0x330 [<ffffffffa043d9aa>] drm_fb_helper_initial_config+0x27a/0x3d0 [drm_kms_helper] [<ffffffffa0469b4d>] mgag200_fbdev_init+0xdd/0xf0 [mgag200] [<ffffffffa0468586>] mgag200_modeset_init+0x176/0x1e0 [mgag200] [<ffffffffa0464659>] mgag200_driver_load+0x3f9/0x580 [mgag200] [<ffffffffa014e067>] drm_dev_register+0xa7/0xb0 [drm] [<ffffffffa015054f>] drm_get_pci_dev+0x8f/0x1e0 [drm] [<ffffffffa046937b>] mga_pci_probe+0x9b/0xc0 [mgag200] [<ffffffff813662d5>] local_pci_probe+0x45/0xa0 [<ffffffff8109afe4>] work_for_cpu_fn+0x14/0x20 [<ffffffff8109e13c>] process_one_work+0x14c/0x3c0 [<ffffffff8109eaa4>] worker_thread+0x244/0x470 [<ffffffff8168bfba>] ? __schedule+0x2aa/0x760 [<ffffffff8109e860>] ? rescuer_thread+0x310/0x310 [<ffffffff810a4438>] kthread+0xd8/0xf0 [<ffffffff810a4360>] ? kthread_park+0x60/0x60 [<ffffffff8169030f>] ret_from_fork+0x3f/0x70 [<ffffffff810a4360>] ? kthread_park+0x60/0x60 Code: f6 31 d2 41 89 c2 8b 83 b4 00 00 00 0f af c1 48 98 48 69 c0 40 42 0f 00 48 f7 f6 f6 43 74 10 41 89 c4 75 26 f6 05 9a 6f 03 00 01 <45> 89 96 b0 00 00 00 45 89 a6 ac 00 00 00 75 35 48 83 c4 08 5b RIP [<ffffffffa014b266>] drm_calc_timestamping_constants+0x86/0x130 [drm] RSP <ffff88007830f4e8> CR2: 00000000000000b0 Cc: Jeff Moyer <jmoyer@redhat.com> Reported-by: Jeff Moyer <jmoyer@redhat.com> References: http://lists.freedesktop.org/archives/dri-devel/2015-November/094217.html Fixes: eba1f35dfe14 ("drm: Move timestamping constants into drm_vblank_crtc") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-11-12libnvdimm: documentation clarificationsKonrad Rzeszutek Wilk1-21/+28
A bunch of changes that I hope will help in understanding it better for first-time readers. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12libnvdimm, pmem: fix size trim in pmem_direct_access()Dan Williams1-13/+2
This masking prevents access to the end of the device via dax_do_io(), and is unnecessary as arch_add_memory() would have rejected an unaligned allocation. Cc: <stable@vger.kernel.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12libnvdimm, e820: fix numa node for e820-type-12 pmem rangesDan Williams1-1/+14
Rather than punt on the numa node for these e820 ranges try to find a better answer with memory_add_physaddr_to_nid() when it is available. Cc: <stable@vger.kernel.org> Reported-by: Boaz Harrosh <boaz@plexistor.com> Tested-by: Boaz Harrosh <boaz@plexistor.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12tools/testing/nvdimm, acpica: fix flag rename build breakageDan Williams1-1/+1
Commit ca321d1ca672 "ACPICA: Update NFIT table to rename a flags field" performed a tree-wide s/ACPI_NFIT_MEM_ARMED/ACPI_NFIT_MEM_NOT_ARMED/ operation, but missed the tools/testing/nvdimm/ directory. Cc: Bob Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-12arm64: suspend: make hw_breakpoint_restore staticJisheng Zhang1-1/+1
hw_breakpoint_restore is only used within suspend.c, so it can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: mmu: make split_pud and fixup_executable staticJisheng Zhang1-2/+2
split_pud and fixup_executable are only called from within mmu.c, so they can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: smp: make of_parse_and_init_cpus staticJisheng Zhang1-1/+1
of_parse_and_init_cpus is only called from within smp.c, so it can be declared static. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: use linux/types.h in kvm.hArnd Bergmann1-1/+1
We should always use linux/types.h instead of asm/types.h for consistency, and Kbuild actually warns about it: ./usr/include/asm/kvm.h:35: include of <linux/types.h> is preferred over <asm/types.h> This patch does as Kbuild asks us. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: build vdso without libgcovArnd Bergmann1-0/+3
On a cross-toolchain without glibc support, libgcov may not be available, and attempting to build an arm64 kernel with GCOV enabled then results in a build error: /home/arnd/cross-gcc/lib/gcc/aarch64-linux/5.2.1/../../../../aarch64-linux/bin/ld: cannot find -lgcov We don't really want to link libgcov into the vdso anyway, so this patch just disables GCOV in the vdso directory, just as we do for most other architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12arm64: mark cpus_have_hwcap as __maybe_unusedArnd Bergmann1-1/+1
cpus_have_hwcap() is defined as a 'static' function an only used in one place that is inside of an #ifdef, so we get a warning when the only user is disabled: arch/arm64/kernel/cpufeature.c:699:13: warning: 'cpus_have_hwcap' defined but not used [-Wunused-function] This marks the function as __maybe_unused, so the compiler knows that it can drop the function definition without warning about it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 37b01d53ceef ("arm64/HWCAP: Use system wide safe values") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-11-12X.509: Fix the time validation [ver #2]David Howells1-5/+7
This fixes CVE-2015-5327. It affects kernels from 4.3-rc1 onwards. Fix the X.509 time validation to use month number-1 when looking up the number of days in that month. Also put the month number validation before doing the lookup so as not to risk overrunning the array. This can be tested by doing the following: cat <<EOF | openssl x509 -outform DER | keyctl padd asymmetric "" @s -----BEGIN CERTIFICATE----- MIIDbjCCAlagAwIBAgIJAN/lUld+VR4hMA0GCSqGSIb3DQEBCwUAMCkxETAPBgNV BAoMCGxvY2FsLWNhMRQwEgYDVQQDDAtzaWduaW5nIGtleTAeFw0xNTA5MDEyMTMw MThaFw0xNjA4MzEyMTMwMThaMCkxETAPBgNVBAoMCGxvY2FsLWNhMRQwEgYDVQQD DAtzaWduaW5nIGtleTCCASIwDQYJKoZIhvcNAQEBBQADggEPADCCAQoCggEBANrn crcMfMeG67nagX4+m02Xk9rkmsMKI5XTUxbikROe7GSUVJ27sPVPZp4mgzoWlvhh jfK8CC/qhEhwep8Pgg4EJZyWOjhZb7R97ckGvLIoUC6IO3FC2ZnR7WtmWDgo2Jcj VlXwJdHhKU1VZwulh81O61N8IBKqz2r/kDhIWiicUCUkI/Do/RMRfKAoDBcSh86m gOeIAGfq62vbiZhVsX5dOE8Oo2TK5weAvwUIOR7OuGBl5AqwFlPnXQolewiHzKry THg9e44HfzG4Mi6wUvcJxVaQT1h5SrKD779Z5+8+wf1JLaooetcEUArvWyuxCU59 qxA4lsTjBwl4cmEki+cCAwEAAaOBmDCBlTAMBgNVHRMEBTADAQH/MAsGA1UdDwQE AwIHgDAdBgNVHQ4EFgQUyND/eKUis7ep/hXMJ8iZMdUhI+IwWQYDVR0jBFIwUIAU yND/eKUis7ep/hXMJ8iZMdUhI+KhLaQrMCkxETAPBgNVBAoMCGxvY2FsLWNhMRQw EgYDVQQDDAtzaWduaW5nIGtleYIJAN/lUld+VR4hMA0GCSqGSIb3DQEBCwUAA4IB AQAMqm1N1yD5pimUELLhT5eO2lRdGUfTozljRxc7e2QT3RLk2TtGhg65JFFN6eml XS58AEPVcAsSLDlR6WpOpOLB2giM0+fV/eYFHHmh22yqTJl4YgkdUwyzPdCHNOZL hmSKeY9xliHb6PNrNWWtZwhYYvRaO2DX4GXOMR0Oa2O4vaYu6/qGlZOZv3U6qZLY wwHEJSrqeBDyMuwN+eANHpoSpiBzD77S4e+7hUDJnql4j6xzJ65+nWJ89fCrQypR 4sN5R3aGeIh3QAQUIKpHilwek0CtEaYERgc5m+jGyKSc1rezJW62hWRTaitOc+d5 G5hh+9YpnYcxQHEKnZ7rFNKJ -----END CERTIFICATE----- EOF If it works, it emit a key ID; if it fails, it should give a bad message error. Reported-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2015-11-11thermal: rockchip: fix compile errorCaesar Wang1-0/+1
Missing a include file caused compile error. drivers/thermal/rockchip_thermal.c: In function 'rockchip_thermal_suspend': drivers/thermal/rockchip_thermal.c:720:2: error: implicit declaration of function 'pinctrl_pm_select_sleep_state' [-Werror=implicit-function-declaration] ... Fixes: 7e38a5b1daa1 ("thermal: rockchip: support the sleep pinctrl state to avoid glitches") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-12h8300: enable CLKSRC_OFYoshinori Sato2-0/+3
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-11-11sd: Clear PS bit before Mode Select.Gabriel Krisman Bertazi1-0/+1
According to SPC-4, in a Mode Select, the PS bit in Mode Pages is reserved and must be set to 0 by the driver. In the sd implementation, function cache_type_store does a Mode Sense, which might set the PS bit on the read buffer, followed by a Mode Select, which receives the same buffer, without explicitly clearing the PS bit. So, in cases where target supports saving the Mode Page to a non-volatile location, we end up doing a Mode Select with the PS bit set, which could cause an illegal request error if the target is checking this. This was observed on a new firmware change, which was subsequently reverted, but this changes sd.c to be more compliant with SPC-4. This patch clears the PS bit in the buffer returned by Mode Select, right before it is used in the Mode Select command. Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11ibmvscsi: set max_lun to 32Laurent Vivier2-1/+2
As defined in 4.6.9 of SAM-4, the encoding of LUN is on 5 bits (max_lun=32) and the current value is only 8. Set max_lun to IBMVSCSI_MAX_LUN (32). Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11ibmvscsi: display default value for max_id, max_lun and max_channel.Laurent Vivier1-2/+6
As devices with values greater than that are silently ignored, this gives some hints to the sys admin to know why he doesn't see his devices... Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl()Dan Carpenter1-0/+4
There is a static checker warning here because "bytes" is controlled by the user and we cap the upper bound with min() but allow negatives. Negative bytes will result in some nasty warning messages but are not super harmful. Anyway, no one needs negative bytes so let's just check for it and return NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11scsi: pmcraid: replace struct timeval with ktime_get_real_seconds()Alison Schofield1-3/+2
Replace the use of struct timeval and do_gettimeofday() with 64 bit ktime_get_real_seconds. Prevents 32-bit type overflow in year 2038 on 32-bit systems. Driver was using the seconds portion of struct timeval (.tv_secs) to pass a millseconds timestamp to the firmware. This change maintains that same behavior using ktime_get_real_seconds. The structure used to pass the timestamp to firmware is 48 bits and works fine as long as the top 16 bits are zero and they will be zero for a long time..ie. thousands of years. Alternative Change: Add sub second granularity to timestamp As noted above, the driver only used the seconds portion of timeval, ignores the microseconds portion, and by multiplying by 1000 effectively does a <<10 and always writes zero into timestamp[0]. The alternative change would pass all the bits to the firmware: struct timespec64 ts; ktime_get_real_ts64(&ts); timestamp = ts.tv_sec * MSEC_PER_SEC + ts.tv_nsec / NSEC_PER_MSEC; Signed-off-by: Alison Schofield <amsfield22@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mvumi: 64bit value for seconds_since1970Tina Ruchandani1-5/+5
struct mvumi_hs_page2 stores a "seconds_since1970" field which is of type u64. It is however, written to, using 'struct timeval' which has a 32-bit seconds field and whose value will overflow in year 2038. This patch uses ktime_get_real_seconds() instead since it provides a 64-bit seconds value, which is 2038 safe. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11be2iscsi: Fix bogus WARN_ON length checkTim Gardner1-1/+1
drivers/scsi/be2iscsi/be_main.c: In function 'be_sgl_create_contiguous': drivers/scsi/be2iscsi/be_main.c:3187:18: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] WARN_ON(!length > 0); gcc version 5.2.1 Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Jayamohan Kallickal <jayamohan.kallickal@avagotech.com> Cc: Minh Tran <minh.tran@avagotech.com> Cc: John Soni Jose <sony.john-n@avagotech.com> Cc: "James E.J. Bottomley" <JBottomley@odin.com> Reported-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Manoj Kumar <manoj@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11scsi_scan: don't dump trace when scsi_prep_async_scan() is called twiceVitaly Kuznetsov1-2/+1
The only user of scsi_prep_async_scan() is scsi_scan_host() and it handles the situation correctly. Move 'called twice' reporting to debug level as well. The issue is observed on Hyper-V: on any device add/remove event storvsc driver calls scsi_scan_host() and in case previous scan is still running we get the message and stack dump on console. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Tested-by: Alex Ng <alexng@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Bump mpt3sas driver version to 09.102.00.00Sreekanth Reddy1-2/+2
Bump mpt3sas driver version to 09.102.00.00 Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAsSreekanth Reddy14-826/+566
Modified the mpt3sas driver to have a single driver module which supports both SAS 2.0 & SAS 3.0 HBA devices. * Added SAS 2.0 HBA device IDs to the mpt3sas_pci_table pci table. * Created two separate SCSI host templates for SAS2 and SAS3 HBAs so that, during the driver load time driver can use corresponding host template(based the pci device ID) while registering a scsi host adapter instance for that pci device. * Registered two IOCTL devices, mpt2ctl is for SAS2 HBAs & mpt3ctl for SAS3 HBAs. Also updated the code to make sure that mpt2ctl device processes only those ioctl cmds issued for the SAS2 HBAs and mpt3ctl device processes only those ioctl cmds issued for the SAS3 HBAs. * Added separate indexing for SAS2 and SAS3 HBAs. * Replaced compile time check 'MPT2SAS_SCSI' to run time check 'hba_mpi_version_belonged' whereever needed. * Aliased this merged driver to mpt2sas using MODULE_ALIAS. * Moved global varaible 'driver_name' to per adapter instance variable. * Created two raid function template and used corresponding raid function templates based on the run time check 'hba_mpi_version_belonged'. * Moved mpt2sas_warpdrive.c file from mpt2sas to mpt3sas folder and renamed it as mpt3sas_warpdrive.c. * Also renamed the functions in mpt3sas_warpdrive.c file to follow current driver function name convention. * Updated the Makefile to build mpt3sas_warpdrive.o file for these WarpDrive-specific functions. * Also in function mpt3sas_setup_direct_io(), used sector_div() API instead of division operator (which gives compilation errors on 32 bit machines). * Removed mpt2sas files, mpt2sas directory & mpt3sas_module.c file. * Added module parameter 'hbas_to_enumerate' which permits using this merged driver as a legacy mpt2sas driver or as a legacy mpt3sas driver. Here are the available options for this module parameter: 0 - Merged driver which enumerates both SAS 2.0 & SAS 3.0 HBAs 1 - Acts as legacy mpt2sas driver, which enumerates only SAS 2.0 HBAs 2 - Acts as legacy mpt3sas driver, which enumerates only SAS 3.0 HBAs * Removed mpt2sas entries from SCSI's Kconfig and Makefile files. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt2sas, mpt3sas: Update the driver versionsSreekanth Reddy1-5/+10
Bump the mpt2sas driver version to 20.102.00.00 and Bump the mpt3sas driver version to 9.101.00.00. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: setpci reset kernel oops fixSreekanth Reddy4-9/+71
setpci reset on nytro warpdrive card along with sysfs access and cli ioctl access resulted in kernel oops 1. pci_access_mutex lock added to provide synchronization between IOCTL, sysfs, PCI resource handling path 2. gioc_lock spinlock to protect list operations over multiple controllers This patch is ported from commit 6229b414b3ad ("mpt2sas: setpci reset kernel oops fix"). Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Added OEM Gen2 PnP ID branding namesSreekanth Reddy2-114/+305
Added OEM Gen2 PnP ID branding names from mpt2sas driver. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Refcount fw_events and fix unsafe list usageSreekanth Reddy1-22/+94
The fw_event_work struct is concurrently referenced at shutdown. Add a refcount to protect it and refactor the code to use it. Additionally, refactor _scsih_fw_event_cleanup_queue() such that it no longer iterates over the list without holding the lock since _firmware_event_work() concurrently deletes items from the list. This patch is ported from commit 008549f6e8a1 ("mpt2sas: Refcount fw_events and fix unsafe list usage"). These changes are also required for mpt3sas. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Refcount sas_device objects and fix unsafe list usageSreekanth Reddy3-157/+365
sas_device objects can be referenced concurrently throughout the driver. We need a way to make sure threads can't delete them out from under each other. This patch adds the refcount and refactors the code to use it. Additionally, we cannot iterate over the sas_device_list without holding the lock or we risk corrupting random memory if items are added or deleted as we iterate. This patch refactors _scsih_probe_sas() to use the sas_device_list in a safe way. This patch is ported from the following mpt2sas driver commit d224fe0d6097 ("mpt2sas: Refcount sas_device objects and fix unsafe list usage"). Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: sysfs attribute to report Backup Rail Monitor StatusSreekanth Reddy3-0/+116
A new sysfs shost attribute called "BMR_status" is implemented to report Backup Rail Monitor status. This attribute is located in: /sys/class/scsi_host/host#/BMR_status When reading this adapter attribute, the driver will output the state of GPIO[24]. It returns "0" if BMR is healthy and "1" for failure. If it returns an empty string then it means that there was an error while obtaining the BMR status. Check dmesg for what error has occurred. This sysfs shost attribute is mainly for WarpDrive controllers. This commit is a port of 6c265660c262 ("mpt2sas: Provide sysfs attribute to report Backup Rail Monitor Status"). Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Ported WarpDrive product SSS6200 supportSreekanth Reddy6-46/+665
Ported the following list of WarpDrive-specific patches: 1. commit 0bdccdb0a090ad8dc5f851cad5e843244c410ee8 ("mpt2sas: WarpDrive New product SSS6200 support added") 2. commit 82a452581230b3ffc9d6475dffdb2568497b5fec ("mpt2sas: WarpDrive Infinite command retries due to wrong scsi command entry in MPI message") 3. commit ba96bd0b1d4a4e11f23671e1f375a5c8f46b0fe7 ("mpt2sas: Support for greater than 2TB capacity WarpDrive") 4. commit 4da7af9494b2f98a1503a2634059300c3e4615e6 ("mpt2sas: Do not retry a timed out direct IO for Warpdrive") 5. commit daeaa9df92bd742f4e6d4d6039d689277a8e31bd ("mpt2sas: Avoid type casting for direct I/O commands"). Also set the mpt2_ioctl_iocinfo adapter_type to: 1. MPT3_IOCTL_INTERFACE_SAS3 for Gen3 HBAs 2. MPT2_IOCTL_INTERFACE_SAS2_SSS6200 for Warp Drive 3. MPT2_IOCTL_INTERFACE_SAS2 for other Gen2 HBAs Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: fix for driver fails EEH, recovery from injected pci bus errorSreekanth Reddy2-1/+19
This patch stops the driver to invoke kthread (which remove the dead ioc) for some time while EEH recovery has started. This patch is a port of commit b4730fb6e54a ("mpt2sas: fix for driver fails EEH, recovery from injected pci bus error")'. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Manage MSI-X vectors according to HBA device typeSreekanth Reddy3-18/+31
1. Do not enable MSI-X vectors for SAS2008 B0 controllers 2. Enable a single MSI-X vector for the following controller: a. SAS2004 b. SAS2008 c. SAS2008_1 d. SAS2008_2 e. SAS2008_3 f. SAS2116_1 g. SAS2116_2 3. Enable Combined Reply Post Queue Support (i.e. 96 MSI-X vectors) for Gen3 Invader/Fury C0 and above revision HBAs 4. Enable Combined Reply Post Queue Support (i.e. 96 MSI-X vectors) for all Intruder and Cutlass HBAs Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Don't send PHYDISK_HIDDEN RAID action request on SAS2 HBAsSreekanth Reddy1-2/+17
Avoid sending PHYDISK_HIDDEN RAID action requests to SAS2 controllers since they don't support it. Also enable fast_path only for SAS3 HBAs. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Build MPI SGL LIST on GEN2 HBAs and IEEE SGL LIST on GEN3 HBAsSreekanth Reddy1-13/+168
Gen2 HBAs use MPI scatter-gather lists whereas Gen3 HBAs use IEEE scatter-gather lists. Modify the common code part in such a way that it will build IEEE SGL tables for Gen3 HBAs and MPI SGL tables for Gen2 HBAs. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt2sas, mpt3sas: Remove SCSI_MPTXSAS_LOGGING entry from KconfigSreekanth Reddy7-83/+10
Currently there is a logging level option provided for each of our drivers in the kernel configuration utility. Users can enable this option to get more verbose information. By default it is enabled. Only when this option is enabled will the functions which display the required information get compiled in. As we are merging the both drivers we can no longer provide this configuration option. Remove the SCSI_MPTXSAS_LOGGING entry from Kconfig and unconditionally enable logging (by removing the #ifdef CONFIG_SCSI_MPT3SAS_LOGGING preprocessor check conditions) so that all functions which are defined to display more verbose information get compiled in. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt3sas: Define 'hba_mpi_version_belonged' IOC variableSreekanth Reddy6-8/+62
1. Use 'hba_mpi_version_belonged' IOC varable to uniquely identify each individual generation driver functionality at runtime. 2. Declare global variable 'driver_name' and use this variable while reserving PCI regions and while allocating the IRQs. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt2sas: Remove .c and .h files from mpt2sas driverSreekanth Reddy8-22391/+0
Remove .c and .h files which are no longer needed from mpt2sas driver. We are reusing this code from mpt3sas. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-11mpt2sas: Move Gen2 HBA's device registration to a separate fileSreekanth Reddy3-6/+293
1. Create a mpt2sas_module.c file for mpt2sas where GEN2 HBA devices register with PCI, SML, IOCTL subsystems. 2. Updated the Makefile to use the object files from mpt3sas folder. 3. Defined a compilation flag SCSI_MPT2SAS which can be used to not include those sections of code from mpt3sas driver which are not required for mpt2sas driver. 4. Inherited automatic diag buffer feature from mpt3sas driver. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.