| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The Versatile Express uses a special configuration controller
deeply embedded in the system motherboard FPGA to multiplex the
two to three (!) display controller instances out to the single
SiI9022 bridge.
Set up an extra file with the logic to probe to the FPGA mux
register on the system controller bus, then parse the device
tree to see if there is a CLCD or HDLCD instance on the core
tile (also known as the daughterboard) by looking in the
root of the device tree for compatible nodes.
- If there is a HDLCD on the core tile, and there is a driver
for it, we exit probe and deactivate the motherboard CLCD.
We do not touch the DVI mux in this case, to make sure we
don't break HDLCD.
- If there is a CLCD on both the motherboard and the core tile
(only the CA9 has this) the core tile CLCD takes precedence
and get muxed to the DVI connector.
- Only if there is no working graphics on the core tile, the
motherboard CLCD is probed and muxed to the DVI connector.
Core tile graphics should always take precedence as it can
address all memory and is also faster, however the motherboard
CLCD is good to have around for diagnostics and testing.
It is possible to test the motherboard CLCD by setting the
status = "disabled" property on the core tile CLCD or
HDLCD.
Scale down the Versatile Express to 16BPP so we can support a
1024x768 display despite the bus bandwidth restrictions on this
platform. (The motherboard CLCD supports slightly lower
resolution.)
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Acked-by: Eric Anholt <eric@anholt.net>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502134719.8388-1-linus.walleij@linaro.org
|
|
Trivial fix to spelling mistake in DRM_ERROR error message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502101048.8442-1-colin.king@canonical.com
|
|
- Switch to inline member docs for dma_fence_ops.
- Mild polish all around.
- hyperlink all the things!
v2: - Remove the various [in] annotations, they seem really uncommon
in kerneldoc and look funny.
v3: Linebreak the "Returns" part of the @fill_driver_data kerneldoc
(Eric).
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180427061724.28497-2-daniel.vetter@ffwll.ch
|
|
Blending win0 with the background color doesn't seem to work
correctly. We only get the background color, no matter the contents of
the win0 framebuffer. However, blending pre-multiplied color with the
default opaque black default background color is a no-op, so we can
just disable blending to get the correct result.
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418173152.93246-1-hoegsberg@chromium.org
|
|
This doesn't require any additional functionality from the driver but
is a prerequisite to userland calling the syncobj ioctls.
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-4-git-send-email-stschake@gmail.com
|
|
Allow specifying a syncobj on render job submission where we store the
fence for the job. This gives userland flexible access to the fence.
v2: Use 0 as invalid syncobj to drop flag (Eric)
Don't reintroduce the padding (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-3-git-send-email-stschake@gmail.com
|
|
Allow userland to specify a syncobj that is waited on before a render job
starts processing.
v2: Use 0 as invalid syncobj to drop flag (Eric)
Drop extra newline (Eric)
Signed-off-by: Stefan Schake <stschake@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/1524607427-12876-2-git-send-email-stschake@gmail.com
|
|
It turns out that I had just mistaken what type of write the register
writes were supposed to be, using DCS instead of generic long writes.
Switching to transactions instead of using the atmel as a bridge also
seems to resolve the sparkling pixels problem I've had.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 2f733d6194bd ("drm/panel: Add support for the Raspberry Pi 7" Touchscreen.")
Link: https://patchwork.freedesktop.org/patch/msgid/20171031193258.17373-2-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Thierry Reding <treding@nvidia.com>
|
|
It seems that trying to go from unlatched to unlatched will time out
waiting for STOP, and we can just skip that.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20171031193258.17373-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
Sparse complains with following warning:
drivers/gpu/drm/vc4/vc4_v3d.c:222:1: warning: symbol
'vc4_allocate_bin_bo' was not declared. Should it be static?
Make vc4_allocate_bin static as it is not used outside of
vc4_v3d.c.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425070953.17933-1-vthakkar1994@gmail.com
|
|
Some drivers leave these unimplemented, so don't make them have
unimplemented stubs.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424004610.4637-2-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
The PiTFT (ili9340) has a hardware reset circuit that resets only
on power-on and not on each reboot through a gpio like the
rpi-display does. As a result, we need to always apply the
rotation value regardless of the display "on/off" state.
Moved the rotation setting code below out_enable:.
Signed-off-by: Tom Callaway <tcallawa@redhat.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423161639.14420-1-tcallawa@redhat.com
|
|
drm_property_add_enum() can calculate the index itself just fine,
so no point in having the caller pass it in.
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180316190420.26734-1-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
|
|
No functional changes in this patch.
The SDP Header is a generic header for secondary data packets for
both eDP and DP so call it dp_sdp_header. This header gets used for
different SDP types already defined.
Also header bytes 2 and 3 are secondary data packet specific header bytes.
So change the comment to indicate the same.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1524770868-16869-1-git-send-email-manasi.d.navare@intel.com
|
|
"make C=1" returns 2 warnings in ltdc_plane_create()
("Using plain integer as NULL pointer"). This patch
fixes them.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419132804.8317-1-philippe.cornu@st.com
|
|
Add mode_valid() function to filter modes according to available
pll clock values and "preferred" modes. It is particularly
useful for hdmi modes that require precise pixel clocks.
Note that "preferred" modes are always accepted:
- this is important for panels because panel clock tolerances are
bigger than hdmi ones and there is no reason to not accept them
(the fps may vary a little but it is not a problem).
- the hdmi preferred mode will be accepted too, but userland will
be able to use others hdmi "valid" modes if necessary.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417114026.8709-1-philippe.cornu@st.com
|
|
When a driver related to one of the endpoints is deferred
due to probe dependencies (i2c, spi...) but the other one
is ready, ltdc probe continues and the deferred driver
will never be probed again.
The fix consists in waiting for all deferred endpoints before
continuing the ltdc probe.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180417113441.8214-1-philippe.cornu@st.com
|
|
These days drm core checks function pointers everywhere before calling
them. So we can drop a bunch of dummy functions now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-5-kraxel@redhat.com
|
|
The encoder callbacks are only called in case the video mode changes.
So any layout changes without mode changes will go unnoticed.
Add qxl_crtc_update_monitors_config(), based on the old
qxl_write_monitors_config_for_encoder() function. Hook it into the
enable, disable and flush atomic crtc callbacks. Remove monitors_config
updates from all other places.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1544322
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-4-kraxel@redhat.com
|
|
Needed to avoid a forward declaration in a followup patch.
Pure code move, no functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-3-kraxel@redhat.com
|
|
qxl_io_log() sends messages over to the host (qemu) for logging.
Remove the function and all callers, we can just use standard
DRM_DEBUG calls (and if needed a serial console).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180420071904.24276-2-kraxel@redhat.com
|
|
The "adjusted_mode" clock value (ie the real pixel clock) is more
accurate than "mode" clock value (ie the panel/bridge requested
clock value). It offers a better preciseness for timing
computations and allows to reduce the extra dsi bandwidth in
burst mode (from ~20% to ~10-12%, hw platform dependent).
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125155504.8611-1-philippe.cornu@st.com
|
|
Bunch of ideas from Eric and me on what we could do to make gem gpu
rendering drivers a notch simpler to type.
v2: Fix typo (Eric).
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180425111742.5872-1-daniel.vetter@ffwll.ch
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131524.2510-1-luc.vanoostenryck@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131515.2360-1-luc.vanoostenryck@gmail.com
Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131522.2460-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131515.2360-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method, psb_intel_lvds_mode_valid(), uses an 'int' for it.
Fix this by using 'enum drm_mode_status' for psb_intel_lvds_mode_valid().
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131458.2060-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131455.2011-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131453.1961-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131445.1861-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131520.2409-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131508.2210-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131504.2159-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131450.1910-1-luc.vanoostenryck@gmail.com
|
|
The method struct drm_connector_helper_funcs::mode_valid is defined
as returning an 'enum drm_mode_status' but the driver implementation
for this method uses an 'int' for it.
Fix this by using 'enum drm_mode_status' in the driver too.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424131443.1810-1-luc.vanoostenryck@gmail.com
|
|
The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.
Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-6-git-send-email-kbingham@kernel.org
|
|
The ADV7511 has four 256-byte maps that can be accessed via the main I2C
ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.
Extend the device tree node bindings to be able to override the default
addresses so that address conflicts with other devices on the same bus
may be resolved at the board description level.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1518544137-2742-3-git-send-email-kbingham@kernel.org
|
|
Only used within drm.ko, no need to tempt drivers.
Cc: Keith Packard <keithp@keithp.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424142242.12093-1-daniel.vetter@ffwll.ch
|
|
I missed this one because on an older tree.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: xen-devel@lists.xen.org
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409085134.27321-1-daniel.vetter@ffwll.ch
|
|
Note that a pile of drivers don't seem to take implicit fencing into
account, or at least don't call drm_atoimc_set_fence_for_plane().
Cc'ing relevant people, or at least some. Some drivers also look like
they don't disable implicit fencing (e.g. amdgpu) because the explicit
fences and implicit fences are handled by entirely independent code
paths.
I also wonder whether we shouldn't just make the recommended helpers
the default ones, since a lot of drivers don't bother to handle the
implicit fences at all it seems. The helpers won't blow up even for
non-GEM drivers or GEM drivers which don't fill out the gem bo
pointers in struct drm_framebuffer.
v2: Comments from Eric.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-7-daniel.vetter@ffwll.ch
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-6-daniel.vetter@ffwll.ch
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-5-daniel.vetter@ffwll.ch
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-4-daniel.vetter@ffwll.ch
|
|
There's nothing tinydrm specific to this, and there's a few more
copies of the same in various other drivers.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: David Lechner <david@lechnology.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-3-daniel.vetter@ffwll.ch
|
|
Less hits to go through when I git grep over all drivers. These
callbacks are optional.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405154449.23038-2-daniel.vetter@ffwll.ch
|
|
The Lenovo Ideapad Mixx 320 laptop uses a portrait LCD panel, add a
quirk for this.
While at it instead of duplicating the same drm_dmi_panel_orientation_data
for 3 laptops add a generic lcd800x1280_rightside_up orientation_data and
use that for all 3 (including the new Mixx 320 entry).
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-2-hdegoede@redhat.com
|
|
Some production batches of the Lenovo Ideapad Mixx 310 laptop use
a portrait LCD panel, add a quirk for this.
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418123642.11088-1-hdegoede@redhat.com
|
|
It is not used anymore after last changes and it was not even correct to
begin with as it assumed a 1:1 relation between a CRTC and encoder,
while in fact a CRTC can be attached to multiple encoders.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-28-enric.balletbo@collabora.com
|
|
Currently PSR flush is triggered from CRTC's .atomic_begin() callback,
which is executed after modeset disables and enables and before plane
updates are committed. Since PSR flush and re-enable can be triggered
asynchronously by external sources (input event, delayed work), it can
race with hardware programming done in the aforementioned stages.
This patch blocks the PSR completely before hardware programming part
begins and unblock after it ends. This relies on reference counted PSR
disable introduced with previous patch.
Cc: Kristian H. Kristensen <hoegsberg@chromium.org>
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-27-enric.balletbo@collabora.com
|
|
Currently both rockchip_drm_psr_activate() and _deactivate() only set the
boolean "active" flag without actually making sure that hardware state
complies with it.
Since we are going to extend the usage of this API to properly lock PSR
for the duration of atomic commits, we change the semantics in following
way:
- a counter is used to track the number of inhibit requests,
- PSR is actually disabled in hardware on first inhibit request,
- PSR enable work is scheduled on last allow request.
The above allows using the API as a way to deterministically synchronize
PSR state changes with other DRM events, i.e. atomic commits and cursor
updates. As a nice side effect, the naming is sorted out and we have
"inhibit" for stopping the software logic and "enable" for hardware
state.
Signed-off-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-26-enric.balletbo@collabora.com
|
Linus Walleij
Colin Ian King
Daniel Vetter
Kristian H. Kristensen
Stefan Schake
Eric Anholt
Vaishali Thakkar
Tom Callaway
Ville Syrjälä
Manasi Navare
Philippe CORNU
Gerd Hoffmann
Luc Van Oostenryck
Kieran Bingham
Hans de Goede
Tomasz Figa