aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29afs: Fix afs_invalidatepage to adjust the dirty regionDavid Howells4-14/+79
Fix afs_invalidatepage() to adjust the dirty region recorded in page->private when truncating a page. If the dirty region is entirely removed, then the private data is cleared and the page dirty state is cleared. Without this, if the page is truncated and then expanded again by truncate, zeros from the expanded, but no-longer dirty region may get written back to the server if the page gets laundered due to a conflicting 3rd-party write. It mustn't, however, shorten the dirty region of the page if that page is still mmapped and has been marked dirty by afs_page_mkwrite(), so a flag is stored in page->private to record this. Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
2020-10-29afs: Alter dirty range encoding in page->privateDavid Howells2-4/+4
Currently, page->private on an afs page is used to store the range of dirtied data within the page, where the range includes the lower bound, but excludes the upper bound (e.g. 0-1 is a range covering a single byte). This, however, requires a superfluous bit for the last-byte bound so that on a 4KiB page, it can say 0-4096 to indicate the whole page, the idea being that having both numbers the same would indicate an empty range. This is unnecessary as the PG_private bit is clear if it's an empty range (as is PG_dirty). Alter the way the dirty range is encoded in page->private such that the upper bound is reduced by 1 (e.g. 0-0 is then specified the same single byte range mentioned above). Applying this to both bounds frees up two bits, one of which can be used in a future commit. This allows the afs filesystem to be compiled on ppc32 with 64K pages; without this, the following warnings are seen: ../fs/afs/internal.h: In function 'afs_page_dirty_to': ../fs/afs/internal.h:881:15: warning: right shift count >= width of type [-Wshift-count-overflow] 881 | return (priv >> __AFS_PAGE_PRIV_SHIFT) & __AFS_PAGE_PRIV_MASK; | ^~ ../fs/afs/internal.h: In function 'afs_page_dirty': ../fs/afs/internal.h:886:28: warning: left shift count >= width of type [-Wshift-count-overflow] 886 | return ((unsigned long)to << __AFS_PAGE_PRIV_SHIFT) | from; | ^~ Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
2020-10-29afs: Wrap page->private manipulations in inline functionsDavid Howells3-34/+44
The afs filesystem uses page->private to store the dirty range within a page such that in the event of a conflicting 3rd-party write to the server, we write back just the bits that got changed locally. However, there are a couple of problems with this: (1) I need a bit to note if the page might be mapped so that partial invalidation doesn't shrink the range. (2) There aren't necessarily sufficient bits to store the entire range of data altered (say it's a 32-bit system with 64KiB pages or transparent huge pages are in use). So wrap the accesses in inline functions so that future commits can change how this works. Also move them out of the tracing header into the in-directory header. There's not really any need for them to be in the tracing header. Signed-off-by: David Howells <dhowells@redhat.com>
2020-10-29afs: Fix where page->private is set during writeDavid Howells1-15/+26
In afs, page->private is set to indicate the dirty region of a page. This is done in afs_write_begin(), but that can't take account of whether the copy into the page actually worked. Fix this by moving the change of page->private into afs_write_end(). Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
2020-10-29afs: Fix page leak on afs_write_begin() failureDavid Howells1-12/+11
Fix the leak of the target page in afs_write_begin() when it fails. Fixes: 15b4650e55e0 ("afs: convert to new aops") Signed-off-by: David Howells <dhowells@redhat.com> cc: Nick Piggin <npiggin@gmail.com>
2020-10-29afs: Fix to take ref on page when PG_private is setDavid Howells4-26/+18
Fix afs to take a ref on a page when it sets PG_private on it and to drop the ref when removing the flag. Note that in afs_write_begin(), a lot of the time, PG_private is already set on a page to which we're going to add some data. In such a case, we leave the bit set and mustn't increment the page count. As suggested by Matthew Wilcox, use attach/detach_page_private() where possible. Fixes: 31143d5d515e ("AFS: implement basic file write support") Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
2020-10-28ext4: indicate that fast_commit is available via /sys/fs/ext4/feature/...Theodore Ts'o1-0/+2
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: use generic casefolding supportDaniel Rosenberg5-93/+17
This switches ext4 over to the generic support provided in libfs. Since casefolded dentries behave the same in ext4 and f2fs, we decrease the maintenance burden by unifying them, and any optimizations will immediately apply to both. Signed-off-by: Daniel Rosenberg <drosen@google.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20201028050820.1636571-1-drosen@google.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: do not use extent after put_bhyangerkun1-15/+15
ext4_ext_search_right() will read more extent blocks and call put_bh after we get the information we need. However, ret_ex will break this and may cause use-after-free once pagecache has been freed. Fix it by copying the extent structure if needed. Signed-off-by: yangerkun <yangerkun@huawei.com> Link: https://lore.kernel.org/r/20201028055617.2569255-1-yangerkun@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
2020-10-28ext4: use IS_ERR() for error checking of pathHarshad Shirwadkar1-2/+4
With this fix, fast commit recovery code uses IS_ERR() for path returned by ext4_find_extent. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027204342.2794949-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: fix mmap write protection for data=journal modeJan Kara1-2/+3
Commit afb585a97f81 "ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()") added calls ext4_jbd2_inode_add_write() to track inode ranges whose mappings need to get write-protected during transaction commits. However the added calls use wrong start of a range (0 instead of page offset) and so write protection is not necessarily effective. Use correct range start to fix the problem. Fixes: afb585a97f81 ("ext4: data=journal: write-protect pages on j_submit_inode_data_buffers()") Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201027132751.29858-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28jbd2: fix a kernel-doc markupMauro Carvalho Chehab1-1/+1
The kernel-doc markup that documents _fc_replay_callback is missing an asterisk, causing this warning: ../include/linux/jbd2.h:1271: warning: Function parameter or member 'j_fc_replay_callback' not described in 'journal_s' When building the docs. Fixes: 609f928af48f ("jbd2: fast commit recovery path") Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Link: https://lore.kernel.org/r/6055927ada2015b55b413cdd2670533bdc9a8da2.1603791716.git.mchehab+huawei@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: use s_mount_flags instead of s_mount_state for fast commit stateHarshad Shirwadkar3-15/+15
Ext4's fast commit related transient states should use sb->s_mount_flags instead of persistent sb->s_mount_state. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027044915.2553163-3-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: make num of fast commit blocks configurableHarshad Shirwadkar2-2/+15
This patch reserves a field in the jbd2 superblock for number of fast commit blocks. When this value is non-zero, Ext4 uses this field to set the number of fast commit blocks. Fixes: 6866d7b3f2bb ("ext4/jbd2: add fast commit initialization") Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027044915.2553163-2-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: properly check for dirty state in ext4_inode_datasync_dirty()Andrea Righi1-4/+6
ext4_inode_datasync_dirty() needs to return 'true' if the inode is dirty, 'false' otherwise, but the logic seems to be incorrectly changed by commit aa75f4d3daae ("ext4: main fast-commit commit path"). This introduces a problem with swap files that are always failing to be activated, showing this error in dmesg: [ 34.406479] swapon: file is not committed Simple test case to reproduce the problem: # fallocate -l 8G swapfile # chmod 0600 swapfile # mkswap swapfile # swapon swapfile Fix the logic to return the proper state of the inode. Link: https://lore.kernel.org/lkml/20201024131333.GA32124@xps-13-7390 Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201027044915.2553163-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-28ext4: fix double locking in ext4_fc_commit_dentry_updates()Harshad Shirwadkar1-1/+0
Fixed double locking of sbi->s_fc_lock in the above function as reported by kernel-test-robot. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201023161339.1449437-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-10-27afs: Fix afs_launder_page to not clear PG_writebackDavid Howells2-4/+7
Fix afs_launder_page() to not clear PG_writeback on the page it is laundering as the flag isn't set in this case. Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <dhowells@redhat.com>
2020-10-27afs: Fix a use after free in afs_xattr_get_acl()Dan Carpenter1-1/+1
The "op" pointer is freed earlier when we call afs_put_operation(). Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Colin Ian King <colin.king@canonical.com>
2020-10-27afs: Fix tracing deref-before-checkDavid Howells1-1/+2
The patch dca54a7bbb8c: "afs: Add tracing for cell refcount and active user count" from Oct 13, 2020, leads to the following Smatch complaint: fs/afs/cell.c:596 afs_unuse_cell() warn: variable dereferenced before check 'cell' (see line 592) Fix this by moving the retrieval of the cell debug ID to after the check of the validity of the cell pointer. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: dca54a7bbb8c ("afs: Add tracing for cell refcount and active user count") Signed-off-by: David Howells <dhowells@redhat.com> cc: Dan Carpenter <dan.carpenter@oracle.com>
2020-10-27afs: Fix copy_file_range()David Howells1-0/+1
The prevention of splice-write without explicit ops made the copy_file_write() syscall to an afs file (as done by the generic/112 xfstest) fail with EINVAL. Fix by using iter_file_splice_write() for afs. Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2020-10-27mm/process_vm_access: Add missing #include <linux/compat.h>Geert Uytterhoeven1-0/+1
With e.g. m68k/defconfig: mm/process_vm_access.c: In function ‘process_vm_rw’: mm/process_vm_access.c:277:5: error: implicit declaration of function ‘in_compat_syscall’ [-Werror=implicit-function-declaration] 277 | in_compat_syscall()); | ^~~~~~~~~~~~~~~~~ Fix this by adding #include <linux/compat.h>. Reported-by: noreply@ellerman.id.au Reported-by: damian <damian.tometzki@familie-tometzki.de> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: 38dc5079da7081e8 ("Fix compat regression in process_vm_rw()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-27arm/build: Always handle .ARM.exidx and .ARM.extab sectionsNathan Chancellor1-0/+4
After turning on warnings for orphan section placement, enabling CONFIG_UNWINDER_FRAME_POINTER instead of CONFIG_UNWINDER_ARM causes thousands of warnings when clang + ld.lld are used: $ scripts/config --file arch/arm/configs/multi_v7_defconfig \ -d CONFIG_UNWINDER_ARM \ -e CONFIG_UNWINDER_FRAME_POINTER $ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 defconfig zImage ld.lld: warning: init/built-in.a(main.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.ref.text) is being placed in '.ARM.extab.ref.text' ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(do_mounts_initrd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab) is being placed in '.ARM.extab' These sections are handled by the ARM_UNWIND_SECTIONS define, which is only added to the list of sections when CONFIG_ARM_UNWIND is set. CONFIG_ARM_UNWIND is a hidden symbol that is only selected when CONFIG_UNWINDER_ARM is set so CONFIG_UNWINDER_FRAME_POINTER never handles these sections. According to the help text of CONFIG_UNWINDER_ARM, these sections should be discarded so that the kernel image size is not affected. Fixes: 5a17850e251a ("arm/build: Warn on orphan section placement") Link: https://github.com/ClangBuiltLinux/linux/issues/1152 Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Review-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> [kees: Made the discard slightly more specific] Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20200928224854.3224862-1-natechancellor@gmail.com
2020-10-27vmlinux.lds.h: Keep .ctors.* with .ctorsKees Cook1-0/+1
Under some circumstances, the compiler generates .ctors.* sections. This is seen doing a cross compile of x86_64 from a powerpc64el host: x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/trace_clock.o' being placed in section `.ctors.65435' x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ftrace.o' being placed in section `.ctors.65435' x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ring_buffer.o' being placed in section `.ctors.65435' Include these orphans along with the regular .ctors section. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: 83109d5d5fba ("x86/build: Warn on orphan section placement") Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20201005025720.2599682-1-keescook@chromium.org
2020-10-27Fix compat regression in process_vm_rw()Jens Axboe1-1/+2
The removal of compat_process_vm_{readv,writev} didn't change process_vm_rw(), which always assumes it's not doing a compat syscall. Instead of passing in 'false' unconditionally for 'compat', make it conditional on in_compat_syscall(). [ Both Al and Christoph point out that trying to access a 64-bit process from a 32-bit one cannot work anyway, and is likely better prohibited, but that's a separate issue - Linus ] Fixes: c3973b401ef2 ("mm: remove compat_process_vm_{readv,writev}") Reported-and-tested-by: Kyle Huey <me@kylehuey.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-27tracing, synthetic events: Replace buggy strcat() with seq_buf operationsSteven Rostedt (VMware)1-14/+22
There was a memory corruption bug happening while running the synthetic event selftests: kmemleak: Cannot insert 0xffff8c196fa2afe5 into the object search tree (overlaps existing) CPU: 5 PID: 6866 Comm: ftracetest Tainted: G W 5.9.0-rc5-test+ #577 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x8d/0xc0 create_object.cold+0x3b/0x60 slab_post_alloc_hook+0x57/0x510 ? tracing_map_init+0x178/0x340 __kmalloc+0x1b1/0x390 tracing_map_init+0x178/0x340 event_hist_trigger_func+0x523/0xa40 trigger_process_regex+0xc5/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fef0a63a487 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff76f18398 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000039 RCX: 00007fef0a63a487 RDX: 0000000000000039 RSI: 000055eb3b26d690 RDI: 0000000000000001 RBP: 000055eb3b26d690 R08: 000000000000000a R09: 0000000000000038 R10: 000055eb3b2cdb80 R11: 0000000000000246 R12: 0000000000000039 R13: 00007fef0a70b500 R14: 0000000000000039 R15: 00007fef0a70b700 kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff8c196fa2afe0 (size 8): kmemleak: comm "ftracetest", pid 6866, jiffies 4295082531 kmemleak: min_count = 1 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: __kmalloc+0x1b1/0x390 tracing_map_init+0x1be/0x340 event_hist_trigger_func+0x523/0xa40 trigger_process_regex+0xc5/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The cause came down to a use of strcat() that was adding an string that was shorten, but the strcat() did not take that into account. strcat() is extremely dangerous as it does not care how big the buffer is. Replace it with seq_buf operations that prevent the buffer from being overwritten if what is being written is bigger than the buffer. Fixes: 10819e25799a ("tracing: Handle synthetic event array field type checking correctly") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Tested-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-10-26scsi: qla2xxx: remove incorrect sparse #ifdefLinus Torvalds1-4/+0
The code to try to shut up sparse warnings about questionable locking didn't shut up sparse: it made the result not parse as valid C at all, since the end result now has a label with no statement. The proper fix is to just always lock the hardware, the same way Bart did in commit 8ae178760b23 ("scsi: qla2xxx: Simplify the functions for dumping firmware"). That avoids the whole problem with having locking that is not statically obvious. But in the meantime, just remove the incorrect attempt at trying to avoid a sparse warning that just made things worse. This was exposed by commit 3e6efab865ac ("scsi: qla2xxx: Fix reset of MPI firmware"), very similarly to how commit cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") exposed the same problem in another place, and caused that commit 8ae178760b23. Please don't add code to just shut up sparse without actually fixing what sparse complains about. Reported-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Arun Easi <aeasi@marvell.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-26arch/um: partially revert the conversion to __section() macroLinus Torvalds2-2/+2
A couple of um files ended up not including the header file that defines the __section() macro, and the simplest fix is to just revert the change for those files. Fixes: 33def8498fdd treewide: Convert macro and uses of __section(foo) to __section("foo") Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-26dt-bindings: Another round of adding missing 'additionalProperties/unevalutatedProperties'Rob Herring17-0/+39
Another round of wack-a-mole. The json-schema default is additional unknown properties are allowed, but for DT all properties should be defined. Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-26dt-bindings: Explicitly allow additional properties in board/SoC schemasRob Herring62-0/+146
In order to add meta-schema checks for additional/unevaluatedProperties being present, all schema need to make this explicit. As the top-level board/SoC schemas always have additional properties, add 'additionalProperties: true'. Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20201005183830.486085-4-robh@kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-26dt-bindings: More whitespace clean-ups in schema filesRob Herring34-219/+223
Clean-up incorrect indentation, extra spaces, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (now integrated into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-gpio@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sam Ravnborg <sam@ravnborg.org> # for display Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for-iio Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-26mfd: google,cros-ec: add missing propertiesRicardo Cañuelo2-10/+64
Add missing properties that are currently used in the examples of subnode bindings and in many DTs. Also updates the example in sound/google,cros-ec-codec.yaml to comply with the google,cros-ec binding. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-4-ricardo.canuelo@collabora.com [robh: Add missing '#address-cells' and '#size-cells'] Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-26dt-bindings: input: convert cros-ec-keyb to json-schemaRicardo Cañuelo3-72/+95
Convert the google,cros-ec-keyb binding to YAML and add it as a property of google,cros-ec.yaml Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-3-ricardo.canuelo@collabora.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-26dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schemaRicardo Cañuelo3-39/+71
Convert the google,cros-ec-i2c-tunnel binding to YAML and add it as a property of google,cros-ec.yaml. Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Link: https://lore.kernel.org/r/20201021114308.25485-2-ricardo.canuelo@collabora.com [robh: add ref to i2c-controller.yaml] Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-26cachefiles: Handle readpage error correctlyMatthew Wilcox (Oracle)1-1/+2
If ->readpage returns an error, it has already unlocked the page. Fixes: 5e929b33c393 ("CacheFiles: Handle truncate unlocking the page we're reading") Cc: stable@vger.kernel.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-26s390: correct __bootdata / __bootdata_preserved macrosVasily Gorbik1-2/+2
Currently s390 build is broken. SECTCMP .boot.data error: section .boot.data differs between vmlinux and arch/s390/boot/compressed/vmlinux make[2]: *** [arch/s390/boot/section_cmp.boot.data] Error 1 SECTCMP .boot.preserved.data error: section .boot.preserved.data differs between vmlinux and arch/s390/boot/compressed/vmlinux make[2]: *** [arch/s390/boot/section_cmp.boot.preserved.data] Error 1 make[1]: *** [bzImage] Error 2 Commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") converted all __section(foo) to __section("foo"). This is wrong for __bootdata / __bootdata_preserved macros which want variable names to be a part of intermediate section names .boot.data.<var name> and .boot.preserved.data.<var name>. Those sections are later sorted by alignment + name and merged together into final .boot.data / .boot.preserved.data sections. Those sections must be identical in the decompressor and the decompressed kernel (that is checked during the build). Fixes: 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-10-25of: Fix reserved-memory overlap detectionVincent Whitchurch1-2/+11
The reserved-memory overlap detection code fails to detect overlaps if either of the regions starts at address 0x0. The code explicitly checks for and ignores such regions, apparently in order to ignore dynamically allocated regions which have an address of 0x0 at this point. These dynamically allocated regions also have a size of 0x0 at this point, so fix this by removing the check and sorting the dynamically allocated regions ahead of any static regions at address 0x0. For example, there are two overlaps in this case but they are not currently reported: foo@0 { reg = <0x0 0x2000>; }; bar@0 { reg = <0x0 0x1000>; }; baz@1000 { reg = <0x1000 0x1000>; }; quux { size = <0x1000>; }; but they are after this patch: OF: reserved mem: OVERLAP DETECTED! bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000) OF: reserved mem: OVERLAP DETECTED! foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000) Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-25dt-bindings: mailbox: mtk-gce: fix incorrect mbox-cells valueFabien Parent1-1/+1
As the binding documentation says, #mbox-cells must have a value of 2, but the example use a value 3. The MT8173 device tree correctly use mbox-cells = <2>. This commit fixes the example. Fixes: 19d8e335d58a ("dt-binding: gce: remove atomic_exec in mboxes property") Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20201018193016.3339045-1-fparent@baylibre.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-25dt-bindings: leds: Update devicetree documents for ID_RGBDan Murphy2-5/+6
Update the leds/common.yaml to indicate that the max color ID is 9. Reflect the same change in the leds-class-multicolor.yaml Reported-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20201016115703.30184-1-dmurphy@ti.com Signed-off-by: Rob Herring <robh@kernel.org>
2020-10-25Linux 5.10-rc1Linus Torvalds1-2/+2
2020-10-25treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches117-196/+196
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25kernel/sys.c: fix prototype of prctl_get_tid_address()Rasmus Villemoes1-3/+3
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25mm: remove kzfree() compatibility definitionEric Biggers6-8/+6
Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25checkpatch: enable GIT_DIR environment use to set git repository locationJoe Perches1-5/+7
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devsHans de Goede1-1/+10
Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627 Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-24random32: add a selftest for the prandom32 codeWilly Tarreau1-0/+56
Given that this code is new, let's add a selftest for it as well. It doesn't rely on fixed sets, instead it picks 1024 numbers and verifies that they're not more correlated than desired. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-24random32: add noise from network and scheduling activityWilly Tarreau4-0/+30
With the removal of the interrupt perturbations in previous random32 change (random32: make prandom_u32() output unpredictable), the PRNG has become 100% deterministic again. While SipHash is expected to be way more robust against brute force than the previous Tausworthe LFSR, there's still the risk that whoever has even one temporary access to the PRNG's internal state is able to predict all subsequent draws till the next reseed (roughly every minute). This may happen through a side channel attack or any data leak. This patch restores the spirit of commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") in that it will perturb the internal PRNG's statee using externally collected noise, except that it will not pick that noise from the random pool's bits nor upon interrupt, but will rather combine a few elements along the Tx path that are collectively hard to predict, such as dev, skb and txq pointers, packet length and jiffies values. These ones are combined using a single round of SipHash into a single long variable that is mixed with the net_rand_state upon each invocation. The operation was inlined because it produces very small and efficient code, typically 3 xor, 2 add and 2 rol. The performance was measured to be the same (even very slightly better) than before the switch to SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC (i40e), the connection rate dropped from 556k/s to 555k/s while the SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-24random32: make prandom_u32() output unpredictableGeorge Spelvin4-190/+318
Non-cryptographic PRNGs may have great statistical properties, but are usually trivially predictable to someone who knows the algorithm, given a small sample of their output. An LFSR like prandom_u32() is particularly simple, even if the sample is widely scattered bits. It turns out the network stack uses prandom_u32() for some things like random port numbers which it would prefer are *not* trivially predictable. Predictability led to a practical DNS spoofing attack. Oops. This patch replaces the LFSR with a homebrew cryptographic PRNG based on the SipHash round function, which is in turn seeded with 128 bits of strong random key. (The authors of SipHash have *not* been consulted about this abuse of their algorithm.) Speed is prioritized over security; attacks are rare, while performance is always wanted. Replacing all callers of prandom_u32() is the quick fix. Whether to reinstate a weaker PRNG for uses which can tolerate it is an open question. Commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") was an earlier attempt at a solution. This patch replaces it. Reported-by: Amit Klein <aksecurity@gmail.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity") Signed-off-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ [ willy: partial reversal of f227e3ec3b5c; moved SIPROUND definitions to prandom.h for later use; merged George's prandom_seed() proposal; inlined siprand_u32(); replaced the net_rand_state[] array with 4 members to fix a build issue; cosmetic cleanups to make checkpatch happy; fixed RANDOM32_SELFTEST build ] Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-24KVM: ioapic: break infinite recursion on lazy EOIVitaly Kuznetsov1-4/+1
During shutdown the IOAPIC trigger mode is reset to edge triggered while the vfio-pci INTx is still registered with a resampler. This allows us to get into an infinite loop: ioapic_set_irq -> ioapic_lazy_update_eoi -> kvm_ioapic_update_eoi_one -> kvm_notify_acked_irq -> kvm_notify_acked_gsi -> (via irq_acked fn ptr) irqfd_resampler_ack -> kvm_set_irq -> (via set fn ptr) kvm_set_ioapic_irq -> kvm_ioapic_set_irq -> ioapic_set_irq Commit 8be8f932e3db ("kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts", 2020-05-04) acknowledges that this recursion loop exists and tries to avoid it at the call to ioapic_lazy_update_eoi, but at this point the scenario is already set, we have an edge interrupt with resampler on the same gsi. Fortunately, the only user of irq ack notifiers (in addition to resamplefd) is i8254 timer interrupt reinjection. These are edge-triggered, so in principle they would need the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi, but they already disable AVIC(*), so they don't need the lazy EOI behavior. Therefore, remove the call to kvm_ioapic_update_eoi_one from ioapic_lazy_update_eoi. This fixes CVE-2020-27152. Note that this issue cannot happen with SR-IOV assigned devices because virtual functions do not have INTx, only MSI. Fixes: f458d039db7e ("kvm: ioapic: Lazy update IOAPIC EOI") Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-24KVM: vmx: rename pi_init to avoid conflict with paridePaolo Bonzini3-4/+4
allyesconfig results in: ld: drivers/block/paride/paride.o: in function `pi_init': (.text+0x1340): multiple definition of `pi_init'; arch/x86/kvm/vmx/posted_intr.o:posted_intr.c:(.init.text+0x0): first defined here make: *** [Makefile:1164: vmlinux] Error 1 because commit: commit 8888cdd0996c2d51cd417f9a60a282c034f3fa28 Author: Xiaoyao Li <xiaoyao.li@intel.com> Date: Wed Sep 23 11:31:11 2020 -0700 KVM: VMX: Extract posted interrupt support to separate files added another pi_init(), though one already existed in the paride code. Reported-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-10-24KVM: x86/mmu: Avoid modulo operator on 64-bit value to fix i386 buildSean Christopherson1-1/+1
Replace a modulo operator with the more common pattern for computing the gfn "offset" of a huge page to fix an i386 build error. arch/x86/kvm/mmu/tdp_mmu.c:212: undefined reference to `__umoddi3' In fact, almost all of tdp_mmu.c can be elided on 32-bit builds, but that is a much larger patch. Fixes: 2f2fad0897cb ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs") Reported-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20201024031150.9318-1-sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>