| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The kernel runs in M-mode without using page tables, and thus can't run
bare metal without help from additional firmware.
Most of the patch is just stubbing out code not needed without page
tables, but there is an interesting detail in the signals implementation:
- The normal RISC-V syscall ABI only implements rt_sigreturn as VDSO
entry point, but the ELF VDSO is not supported for nommu Linux.
We instead copy the code to call the syscall onto the stack.
In addition to enabling the nommu code a new defconfig for a small
kernel image that can run in nommu mode on qemu is also provided, to run
a kernel in qemu you can use the following command line:
qemu-system-riscv64 -smp 2 -m 64 -machine virt -nographic \
-kernel arch/riscv/boot/loader \
-drive file=rootfs.ext2,format=raw,id=hd0 \
-device virtio-blk-device,drive=hd0
Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: updated to apply; add CONFIG_MMU guards
around PCI_IOBASE definition to fix build issues; fixed checkpatch
issues; move the PCI_IO_* and VMEMMAP address space macros along
with the others; resolve sparse warning]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
When we get booted we want a clear slate without any leaks from previous
supervisors or the firmware. Flush the instruction cache and then clear
all registers to known good values. This is really important for the
upcoming nommu support that runs on M-mode, but can't really harm when
running in S-mode either. Vaguely based on the concepts from opensbi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
When in M-Mode, we can use the mhartid CSR to get the ID of the running
HART. Doing so, direct M-Mode boot without firmware is possible.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
RISC-V has the concept of a cpu level interrupt controller. The
interface for it is split between a standardized part that is exposed
as bits in the mstatus/sstatus register and the mie/mip/sie/sip
CRS. But the bit to actually trigger IPIs is not standardized and
just mentioned as implementable using MMIO.
Add support for IPIs using MMIO using the SiFive clint layout (which
is also shared by Ariane, Kendryte and the Qemu virt platform).
Additionally the MMIO block also supports the time value and timer
compare registers, so they are also set up using the same OF node.
Support for other layouts should also be relatively easy to add in the
future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: update include guard format; fix checkpatch
issues; minor commit message cleanup]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Add PDMA support to (arch/riscv/boot/dts/sifive/fu540-c000.dtsi)
Signed-off-by: Green Wan <green.wan@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
When running in M-mode we can't use the SBI to set the timer, and
don't have access to the time CSR as that usually is emulated by
M-mode. Instead provide code that directly accesses the MMIO for
the timer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource
[paul.walmsley@sifive.com: updated to apply; fixed checkpatch
issue; timex.h now includes asm/mmio.h to resolve header file
problems]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The RISC-V ISA only supports flushing the instruction cache for the
local CPU core. Currently we always offload the remote TLB flushing to
the SBI, which then issues an IPI under the hoods. But with M-mode
we do not have an SBI so we have to do it ourselves. IPI to the
other nodes using the existing kernel helpers instead if we have
native clint support and thus can IPI directly from the kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: cleaned up code comment]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Move the sbi poweroff to a separate function and file that is only
compiled if CONFIG_SBI is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
[paul.walmsley@sifive.com: split the WFI fix into a separate patch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
There is no SBI when we run in M-mode, so fail the compile for any code
trying to use SBI calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
When running in M-mode we can't use SBI based drivers. Add a new
CONFIG_RISCV_SBI that drivers that do SBI calls can depend on
instead.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Currently, there is only support for .gz compression type
for generating kernel Image.
Add support for other compression methods(lzma, lz4, lzo, bzip2)
that helps in generating a even smaller kernel image. Image.gz
will still be the default compressed image.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
There are many different formats in each header now, such as
_ASM_XXX_H, __ASM_XXX_H, _ASM_RISCV_XXX_H, RISCV_XXX_H, etc., This patch
tries to unify the format by using _ASM_RISCV_XXX_H, because the most
header use it now. This patch also adds the conditional to the headers
if they lost it.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
The PMD_SIZE is equal to PGDIR_SIZE when __PAGETABLE_PMD_FOLDED is
defined.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: fixed spelling in commit summary]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Many of the privileged CSRs exist in a supervisor and machine version
that are used very similarly. Provide versions of the CSR names and
fields that map to either the S-mode or M-mode variant depending on
a new CONFIG_RISCV_M_MODE kconfig symbol.
Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>
and Paul Walmsley <paul.walmsley@sifive.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip
[paul.walmsley@sifive.com: updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Separate the low-level MMIO static inline functions and macros, such
as {read,write}{b,w,l,q}(), into their own header file under
arch/riscv/include: asm/mmio.h. This is done to break a header
dependency chain that arises when both asm/pgtable.h and asm/io.h are
included by asm/timex.h. Since the problem is related to the legacy
I/O port support in asm/io.h, this allows files under arch/riscv that
encounter those issues to simply include asm/mmio.h instead, and
bypass the legacy I/O port functions. Existing users of asm/io.h
don't need to change anything, since asm/mmio.h is included by
asm/io.h.
While here, clean up some checkpatch.pl-related issues with the
original code.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
Provide a new default fallback power off that just sits in a wfi loop
to save some power.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
[paul.walmsley@sifive.com: split the WFI fix apart from the
nommu-related default_power_off() changes]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
|
|
|
|
When netdevice with offloaded BPF programs is destroyed
the programs are orphaned and removed from the program
IDA - their IDs get released (the programs may remain
accessible via existing open file descriptors and pinned
files). After IDs are released they are set to 0.
This confuses dev_change_xdp_fd() because it compares
the __dev_xdp_query() result where 0 means no program
with prog->aux->id where 0 means orphaned.
dev_change_xdp_fd() would have incorrectly returned success
even though it had not installed the program.
Since drivers already catch this case via bpf_offload_dev_match()
let them handle this case. The error message drivers produce in
this case ("program loaded for a different device") is in fact
correct as the orphaned program must had to be loaded for a
different device.
Fixes: c14a9f633d9e ("net: Don't call XDP_SETUP_PROG when nothing is changed")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 401192113730 ("net: sched: refactor block offloads counter
usage") missed the fact that either new prog or old prog may be
NULL.
Fixes: 401192113730 ("net: sched: refactor block offloads counter usage")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DebugFS for netdevsim now contains some "action trigger" files
which are write only. Don't try to capture the contents of those.
Note that we can't use os.access() because the script requires
root.
Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.
Fixes: d6a61f80b871 ("soreuseport: test mixed v4/v6 sockets")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Craig Gallek <cgallek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.
[0] https://bbs.archlinux.org/viewtopic.php?id=246508
Fixes: 242cd9b5866a ("r8169: use phy_resume/phy_suspend")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.
Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The phylink_dbg() macro does not follow dynamic debug or defined(DEBUG)
and as a result, it spams the kernel log since a PR_DEBUG level is
currently used. Fix it to be defined appropriately whether
CONFIG_DYNAMIC_DEBUG or defined(DEBUG) are set.
Fixes: 17091180b152 ("net: phylink: Add phylink_{printk, err, warn, info, dbg} macros")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Synces the DMA buffer properly in order for CPU and device to see
the most up-to-data data.
Signed-off-by: Yangchun Fu <yangchun@google.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.
RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.
Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.
Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.
Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thiemo Nagel <tnagel@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__IXGBE_RX_BUILD_SKB_ENABLED bit is already cleared.
Signed-off-by: Igor Pylypiv <igor.pylypiv@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
These asterisks were once references to a line that said:
"* Other names and brands may be claimed as the property of others."
But now, they serve no purpose; they can only irritate the reader.
Fixes: de3edab4276c ("e1000: update README for e1000")
Fixes: a3fb65680f65 ("e100.txt: Cleanup license info in kernel doc")
Fixes: da8c01c4502a ("e1000e.txt: Add e1000e documentation")
Fixes: f12a84a9f650 ("Documentation: fm10k: Add kernel documentation")
Fixes: b55c52b1938c ("igb.txt: Add igb documentation")
Fixes: c4e9b56e2442 ("igbvf.txt: Add igbvf Documentation")
Fixes: d7064f4c192c ("Documentation/networking/: Update Intel wired LAN driver documentation")
Fixes: c4b8c01112a1 ("ixgbevf.txt: Update ixgbevf documentation")
Fixes: 1e06edcc2f22 ("Documentation: i40e: Prepare documentation for RST conversion")
Fixes: 105bf2fe6b32 ("i40evf: add driver to kernel build system")
Fixes: 1fae869bcf3d ("Documentation: ice: Prepare documentation for RST conversion")
Fixes: df69ba43217d ("ionic: Add basic framework for IONIC Network device driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Magnus's fix to resolve a potential receive buffer starvation for AF_XDP
got applied to both the i40e_xsk_umem_enable/disable() functions, when it
should have only been applied to the "enable". So clean up the undesired
code in the disable function.
CC: Magnus Karlsson <magnus.karlsson@intel.com>
Fixes: 1f459bdc2007 ("i40e: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
|
|
At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.
If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.
The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
The remove misses to disable and unprepare priv->macclk like what is done
when probe fails.
Add the missed call in remove.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A typo in nfs4_refresh_delegation_stateid() means we're leaking an
RCU lock, and always returning a value of 'false'. As the function
description states, we were always supposed to return 'true' if a
matching delegation was found.
Fixes: 12f275cdd163 ("NFSv4: Retry CLOSE and DELEGRETURN on NFS4ERR_OLD_STATEID.")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
If the delegation is marked as being revoked, we must not use it
for cached opens.
Fixes: 869f9dfa4d6d ("NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_843419 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_843419 into an erratum list and use
cpucap_multi_entry_cap_matches to match our entries.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add the Brahma-B53 CPU (all versions) to the whitelists of CPUs for the
SSB and spectre v2 mitigations.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The Broadcom Brahma-B53 core is susceptible to the issue described by
ARM64_ERRATUM_845719 so this commit enables the workaround to be applied
when executing on that core.
Since there are now multiple entries to match, we must convert the
existing ARM64_ERRATUM_845719 into an erratum list.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
This patch enables the hardware feature "Media Auto Sense" also on the
i350. It works in the same way as on the 82850 devices. Hardware designs
using dual PHYs (fiber/copper) can enable this feature by setting the MAS
enable bits in the NVM_COMPAT register (0x03) in the EEPROM.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Fatal read errors are worth warning about, unless of course the device
was just unplugged from the machine - something that's a rather normal
occurrence when the igb/igc adapter is located on a Thunderbolt dock. So,
let's only WARN() if there's a fatal read error while the device is
still present.
This fixes the following WARN splat that's been appearing whenever I
unplug my Caldigit TS3 Thunderbolt dock from my laptop:
igb 0000:09:00.0 enp9s0: PCIe link lost
------------[ cut here ]------------
igb: Failed to read reg 0x18!
WARNING: CPU: 7 PID: 516 at
drivers/net/ethernet/intel/igb/igb_main.c:756 igb_rd32+0x57/0x6a [igb]
Modules linked in: igb dca thunderbolt fuse vfat fat elan_i2c mei_wdt
mei_hdcp i915 wmi_bmof intel_wmi_thunderbolt iTCO_wdt
iTCO_vendor_support x86_pkg_temp_thermal intel_powerclamp joydev
coretemp crct10dif_pclmul crc32_pclmul i2c_algo_bit ghash_clmulni_intel
intel_cstate drm_kms_helper intel_uncore syscopyarea sysfillrect
sysimgblt fb_sys_fops intel_rapl_perf intel_xhci_usb_role_switch mei_me
drm roles idma64 i2c_i801 ucsi_acpi typec_ucsi mei intel_lpss_pci
processor_thermal_device typec intel_pch_thermal intel_soc_dts_iosf
intel_lpss int3403_thermal thinkpad_acpi wmi int340x_thermal_zone
ledtrig_audio int3400_thermal acpi_thermal_rel acpi_pad video
pcc_cpufreq ip_tables serio_raw nvme nvme_core crc32c_intel uas
usb_storage e1000e i2c_dev
CPU: 7 PID: 516 Comm: kworker/u16:3 Not tainted 5.2.0-rc1Lyude-Test+ #14
Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018
Workqueue: kacpi_hotplug acpi_hotplug_work_fn
RIP: 0010:igb_rd32+0x57/0x6a [igb]
Code: 87 b8 fc ff ff 48 c7 47 08 00 00 00 00 48 c7 c6 33 42 9b c0 4c 89
c7 e8 47 45 cd dc 89 ee 48 c7 c7 43 42 9b c0 e8 c1 94 71 dc <0f> 0b eb
08 8b 00 ff c0 75 b0 eb c8 44 89 e0 5d 41 5c c3 0f 1f 44
RSP: 0018:ffffba5801cf7c48 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff9e7956608840 RCX: 0000000000000007
RDX: 0000000000000000 RSI: ffffba5801cf7b24 RDI: ffff9e795e3d6a00
RBP: 0000000000000018 R08: 000000009dec4a01 R09: ffffffff9e61018f
R10: 0000000000000000 R11: ffffba5801cf7ae5 R12: 00000000ffffffff
R13: ffff9e7956608840 R14: ffff9e795a6f10b0 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff9e795e3c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000564317bc4088 CR3: 000000010e00a006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
igb_release_hw_control+0x1a/0x30 [igb]
igb_remove+0xc5/0x14b [igb]
pci_device_remove+0x3b/0x93
device_release_driver_internal+0xd7/0x17e
pci_stop_bus_device+0x36/0x75
pci_stop_bus_device+0x66/0x75
pci_stop_bus_device+0x66/0x75
pci_stop_and_remove_bus_device+0xf/0x19
trim_stale_devices+0xc5/0x13a
? __pm_runtime_resume+0x6e/0x7b
trim_stale_devices+0x103/0x13a
? __pm_runtime_resume+0x6e/0x7b
trim_stale_devices+0x103/0x13a
acpiphp_check_bridge+0xd8/0xf5
acpiphp_hotplug_notify+0xf7/0x14b
? acpiphp_check_bridge+0xf5/0xf5
acpi_device_hotplug+0x357/0x3b5
acpi_hotplug_work_fn+0x1a/0x23
process_one_work+0x1a7/0x296
worker_thread+0x1a8/0x24c
? process_scheduled_works+0x2c/0x2c
kthread+0xe9/0xee
? kthread_destroy_worker+0x41/0x41
ret_from_fork+0x35/0x40
---[ end trace 252bf10352c63d22 ]---
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 47e16692b26b ("igb/igc: warn when fatal read failure happens")
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Acked-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
tcp_max_syn_backlog default value depends on memory size
and TCP ehash size. Before this patch, the max value
was 2048 [1], which is considered too small nowadays.
Increase it to 4096 to match the recent SOMAXCONN change.
[1] This is with TCP ehash size being capped to 524288 buckets.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SOMAXCONN is /proc/sys/net/core/somaxconn default value.
It has been defined as 128 more than 20 years ago.
Since it caps the listen() backlog values, the very small value has
caused numerous problems over the years, and many people had
to raise it on their hosts after beeing hit by problems.
Google has been using 1024 for at least 15 years, and we increased
this to 4096 after TCP listener rework has been completed, more than
4 years ago. We got no complain of this change breaking any
legacy application.
Many applications indeed setup a TCP listener with listen(fd, -1);
meaning they let the system select the backlog.
Raising SOMAXCONN lowers chance of the port being unavailable under
even small SYNFLOOD attack, and reduces possibilities of side channel
vulnerabilities.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Yue Cao <ycao009@ucr.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit da58f90f11f5 ("netdevsim: Add devlink-trap support") added
delayed work to netdevsim that periodically iterates over the registered
netdevsim ports and reports various packet traps via devlink.
While the delayed work takes the 'port_list_lock' mutex to protect
against concurrent addition / deletion of ports, during device creation
/ dismantle ports are added / deleted without this lock, which can
result in a use-after-free [1].
Fix this by making sure that the ports list is always modified under the
lock.
[1]
[ 59.205543] ==================================================================
[ 59.207748] BUG: KASAN: use-after-free in nsim_dev_trap_report_work+0xa67/0xad0
[ 59.210247] Read of size 8 at addr ffff8883cbdd3398 by task kworker/3:1/38
[ 59.212584]
[ 59.213148] CPU: 3 PID: 38 Comm: kworker/3:1 Not tainted 5.4.0-rc3-custom-16119-ge6abb5f0261e #2013
[ 59.215896] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20180724_192412-buildhw-07.phx2.fedoraproject.org-1.fc29 04/01/2014
[ 59.218384] Workqueue: events nsim_dev_trap_report_work
[ 59.219428] Call Trace:
[ 59.219924] dump_stack+0xa9/0x10e
[ 59.220623] print_address_description.constprop.4+0x21/0x340
[ 59.221976] ? vprintk_func+0x66/0x240
[ 59.222752] __kasan_report.cold.8+0x78/0x91
[ 59.223602] ? nsim_dev_trap_report_work+0xa67/0xad0
[ 59.224603] kasan_report+0xe/0x20
[ 59.225296] nsim_dev_trap_report_work+0xa67/0xad0
[ 59.226435] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 59.227512] ? trace_event_raw_event_rcu_quiescent_state_report+0x360/0x360
[ 59.228851] process_one_work+0x98f/0x1760
[ 59.229684] ? pwq_dec_nr_in_flight+0x330/0x330
[ 59.230656] worker_thread+0x91/0xc40
[ 59.231587] ? process_one_work+0x1760/0x1760
[ 59.232451] kthread+0x34a/0x410
[ 59.233104] ? __kthread_queue_delayed_work+0x240/0x240
[ 59.234141] ret_from_fork+0x3a/0x50
[ 59.234982]
[ 59.235371] Allocated by task 187:
[ 59.236189] save_stack+0x19/0x80
[ 59.236853] __kasan_kmalloc.constprop.5+0xc1/0xd0
[ 59.237822] kmem_cache_alloc_trace+0x14c/0x380
[ 59.238769] __nsim_dev_port_add+0xaf/0x5c0
[ 59.239627] nsim_dev_probe+0x4fc/0x1140
[ 59.240550] really_probe+0x264/0xc00
[ 59.241418] driver_probe_device+0x208/0x2e0
[ 59.242255] __device_attach_driver+0x215/0x2d0
[ 59.243150] bus_for_each_drv+0x154/0x1d0
[ 59.243944] __device_attach+0x1ba/0x2b0
[ 59.244923] bus_probe_device+0x1dd/0x290
[ 59.245805] device_add+0xbac/0x1550
[ 59.246528] new_device_store+0x1f4/0x400
[ 59.247306] bus_attr_store+0x7b/0xa0
[ 59.248047] sysfs_kf_write+0x10f/0x170
[ 59.248941] kernfs_fop_write+0x283/0x430
[ 59.249843] __vfs_write+0x81/0x100
[ 59.250546] vfs_write+0x1ce/0x510
[ 59.251190] ksys_write+0x104/0x200
[ 59.251873] do_syscall_64+0xa4/0x4e0
[ 59.252642] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.253837]
[ 59.254203] Freed by task 187:
[ 59.254811] save_stack+0x19/0x80
[ 59.255463] __kasan_slab_free+0x125/0x170
[ 59.256265] kfree+0x100/0x440
[ 59.256870] nsim_dev_remove+0x98/0x100
[ 59.257651] nsim_bus_remove+0x16/0x20
[ 59.258382] device_release_driver_internal+0x20b/0x4d0
[ 59.259588] bus_remove_device+0x2e9/0x5a0
[ 59.260551] device_del+0x410/0xad0
[ 59.263777] device_unregister+0x26/0xc0
[ 59.264616] nsim_bus_dev_del+0x16/0x60
[ 59.265381] del_device_store+0x2d6/0x3c0
[ 59.266295] bus_attr_store+0x7b/0xa0
[ 59.267192] sysfs_kf_write+0x10f/0x170
[ 59.267960] kernfs_fop_write+0x283/0x430
[ 59.268800] __vfs_write+0x81/0x100
[ 59.269551] vfs_write+0x1ce/0x510
[ 59.270252] ksys_write+0x104/0x200
[ 59.270910] do_syscall_64+0xa4/0x4e0
[ 59.271680] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 59.272812]
[ 59.273211] The buggy address belongs to the object at ffff8883cbdd3200
[ 59.273211] which belongs to the cache kmalloc-512 of size 512
[ 59.275838] The buggy address is located 408 bytes inside of
[ 59.275838] 512-byte region [ffff8883cbdd3200, ffff8883cbdd3400)
[ 59.278151] The buggy address belongs to the page:
[ 59.279215] page:ffffea000f2f7400 refcount:1 mapcount:0 mapping:ffff8883ecc0ce00 index:0x0 compound_mapcount: 0
[ 59.281449] flags: 0x200000000010200(slab|head)
[ 59.282356] raw: 0200000000010200 ffffea000f2f3a08 ffffea000f2fd608 ffff8883ecc0ce00
[ 59.283949] raw: 0000000000000000 0000000000150015 00000001ffffffff 0000000000000000
[ 59.285608] page dumped because: kasan: bad access detected
[ 59.286981]
[ 59.287337] Memory state around the buggy address:
[ 59.288310] ffff8883cbdd3280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.289763] ffff8883cbdd3300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.291452] >ffff8883cbdd3380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 59.292945] ^
[ 59.293815] ffff8883cbdd3400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 59.295220] ffff8883cbdd3480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 59.296872] ==================================================================
Fixes: da58f90f11f5 ("netdevsim: Add devlink-trap support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: syzbot+9ed8f68ab30761f3678e@syzkaller.appspotmail.com
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When rxrpc_recvmsg_data() sets the return value to 1 because it's drained
all the data for the last packet, it checks the last-packet flag on the
whole packet - but this is wrong, since the last-packet flag is only set on
the final subpacket of the last jumbo packet. This means that a call that
receives its last packet in a jumbo packet won't complete properly.
Fix this by having rxrpc_locate_data() determine the last-packet state of
the subpacket it's looking at and passing that back to the caller rather
than having the caller look in the packet header. The caller then needs to
cache this in the rxrpc_call struct as rxrpc_locate_data() isn't then
called again for this packet.
Fixes: 248f219cb8bc ("rxrpc: Rewrite the data and ack handling code")
Fixes: e2de6c404898 ("rxrpc: Use info in skbuff instead of reparsing a jumbo packet")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When disabling an endpoint which has cancelled requests, we should
make sure to giveback requests that are currently pending in the
cancelled list, otherwise we may fall into a situation where command
completion interrupt fires after endpoint has been disabled, therefore
causing a splat.
Fixes: fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer"
Reported-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Link: https://lore.kernel.org/r/20191031090713.1452818-1-felipe.balbi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This code causes a static analysis warning:
block/blk-iocost.c:2113 ioc_weight_write() error: double lock 'irq'
We disable IRQs in blkg_conf_prep() and re-enable them in
blkg_conf_finish(). IRQ disable/enable should not be nested because
that means the IRQs will be enabled at the first unlock instead of the
second one.
Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost")
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The idle time reported in /proc/stat sometimes incorrectly contains
huge values on s390. This is caused by a bug in arch_cpu_idle_time().
The kernel tries to figure out when a different cpu entered idle by
accessing its per-cpu data structure. There is an ordering problem: if
the remote cpu has an idle_enter value which is not zero, and an
idle_exit value which is zero, it is assumed it is idle since
"now". The "now" timestamp however is taken before the idle_enter
value is read.
Which in turn means that "now" can be smaller than idle_enter of the
remote cpu. Unconditionally subtracting idle_enter from "now" can thus
lead to a negative value (aka large unsigned value).
Fix this by moving the get_tod_clock() invocation out of the
loop. While at it also make the code a bit more readable.
A similar bug also exists for show_idle_time(). Fix this is as well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
unwind_for_each_frame stops after the first frame if regs->gprs[15] <=
sp.
The reason is that in case regs are specified, the first frame should be
regs->psw.addr and the second frame should be sp->gprs[8]. However,
currently the second frame is regs->gprs[15], which confuses
outside_of_stack().
Fix by introducing a flag to distinguish this special case from
unwinding the interrupt handler, for which the current behavior is
appropriate.
Fixes: 78c98f907413 ("s390/unwind: introduce stack unwind API")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: stable@vger.kernel.org # v5.2+
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The problem is that we were putting the NUL terminator too far:
buf[sizeof(buf) - 1] = '\0';
If the user input isn't NUL terminated and they haven't initialized the
whole buffer then it leads to an info leak. The NUL terminator should
be:
buf[len - 1] = '\0';
Signed-off-by: Yihui Zeng <yzeng56@asu.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[heiko.carstens@de.ibm.com: keep semantics of how *lenp and *ppos are handled]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
The Kryo cores share errata 1009 with Falkor, so add their model
definitions and enable it for them as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[will: Update entry in silicon-errata.rst]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
VMX already does so if the host has SMEP, in order to support the combination of
CR0.WP=1 and CR4.SMEP=1. However, it is perfectly safe to always do so, and in
fact VMX already ends up running with EFER.NXE=1 on old processors that lack the
"load EFER" controls, because it may help avoiding a slow MSR write. Removing
all the conditionals simplifies the code.
SVM does not have similar code, but it should since recent AMD processors do
support SMEP. So this patch also makes the code for the two vendors more similar
while fixing NPT=0, CR0.WP=1 and CR4.SMEP=1 on AMD processors.
Cc: stable@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
Christoph Hellwig
Damien Le Moal
Green Wan
Atish Patra
Zong Li
Paul Walmsley
Linus Torvalds
Jakub Kicinski
Wei Wang
Heiner Kallweit
Florian Fainelli
Yangchun Fu
Eric Dumazet
Igor Pylypiv
Jonathan Neuschäfer
Wenwen Wang
Jeff Kirsher
Manfred Rudigier
Chuhong Yuan
Trond Myklebust
Doug Berger
Lyude Paul
Ido Schimmel
David Howells
Felipe Balbi
Dan Carpenter
Heiko Carstens
Ilya Leoshkevich
Yihui ZENG
Bjorn Andersson
Paolo Bonzini