aboutsummaryrefslogtreecommitdiffstatshomepage
path: root/tools/perf/scripts/python/export-to-postgresql.py (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-16KVM: nVMX: emulate the INVVPID instructionWanpeng Li2-1/+61
Add the INVVPID instruction emulation. Reviewed-by: Wincy Van <fanwenyi0529@gmail.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: VMX: introduce __vmx_flush_tlb to handle specific vpidWanpeng Li1-8/+13
Introduce __vmx_flush_tlb() to handle specific vpid. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: VMX: adjust interface to allocate/free_vpidWanpeng Li1-13/+12
Adjust allocate/free_vid so that they can be reused for the nested vpid. Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14kvm: fix waitqueue_active without memory barrier in virt/kvm/async_pf.cKosuke Tatsukawa1-0/+4
async_pf_execute() seems to be missing a memory barrier which might cause the waker to not notice the waiter and miss sending a wake_up as in the following figure. async_pf_execute kvm_vcpu_block ------------------------------------------------------------------------ spin_lock(&vcpu->async_pf.lock); if (waitqueue_active(&vcpu->wq)) /* The CPU might reorder the test for the waitqueue up here, before prior writes complete */ prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE); /*if (kvm_vcpu_check_block(vcpu) < 0) */ /*if (kvm_arch_vcpu_runnable(vcpu)) { */ ... return (vcpu->arch.mp_state == KVM_MP_STATE_RUNNABLE && !vcpu->arch.apf.halted) || !list_empty_careful(&vcpu->async_pf.done) ... return 0; list_add_tail(&apf->link, &vcpu->async_pf.done); spin_unlock(&vcpu->async_pf.lock); waited = true; schedule(); ------------------------------------------------------------------------ The attached patch adds the missing memory barrier. I found this issue when I was looking through the linux source code for places calling waitqueue_active() before wake_up*(), but without preceding memory barriers, after sending a patch to fix a similar issue in drivers/tty/n_tty.c (Details about the original issue can be found here: https://lkml.org/lkml/2015/9/28/849). Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: x86: don't notify userspace IOAPIC on edge EOIRadim Krčmář1-2/+4
On real hardware, edge-triggered interrupts don't set a bit in TMR, which means that IOAPIC isn't notified on EOI. Do the same here. Staying in guest/kernel mode after edge EOI is what we want for most devices. If some bugs could be nicely worked around with edge EOI notifications, we should invest in a better interface. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: x86: fix edge EOI and IOAPIC reconfig raceRadim Krčmář2-2/+6
KVM uses eoi_exit_bitmap to track vectors that need an action on EOI. The problem is that IOAPIC can be reconfigured while an interrupt with old configuration is pending and eoi_exit_bitmap only remembers the newest configuration; thus EOI from the pending interrupt is not recognized. (Reconfiguration is not a problem for level interrupts, because IOAPIC sends interrupt with the new configuration.) For an edge interrupt with ACK notifiers, like i8254 timer; things can happen in this order 1) IOAPIC inject a vector from i8254 2) guest reconfigures that vector's VCPU and therefore eoi_exit_bitmap on original VCPU gets cleared 3) guest's handler for the vector does EOI 4) KVM's EOI handler doesn't pass that vector to IOAPIC because it is not in that VCPU's eoi_exit_bitmap 5) i8254 stops working A simple solution is to set the IOAPIC vector in eoi_exit_bitmap if the vector is in PIR/IRR/ISR. This creates an unwanted situation if the vector is reused by a non-IOAPIC source, but I think it is so rare that we don't want to make the solution more sophisticated. The simple solution also doesn't work if we are reconfiguring the vector. (Shouldn't happen in the wild and I'd rather fix users of ACK notifiers instead of working around that.) The are no races because ioapic injection and reconfig are locked. Fixes: b053b2aef25d ("KVM: x86: Add EOI exit bitmap inference") [Before b053b2aef25d, this bug happened only with APICv.] Fixes: c7c9c56ca26f ("x86, apicv: add virtual interrupt delivery support") Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14kvm: x86: set KVM_REQ_EVENT when updating IRRRadim Krčmář1-0/+2
After moving PIR to IRR, the interrupt needs to be delivered manually. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: x86: fix RSM into 64-bit protected modePaolo Bonzini1-3/+7
In order to get into 64-bit protected mode, you need to enable paging while EFER.LMA=1. For this to work, CS.L must be 0. Currently, we load the segments before CR0 and CR4, which means that if RSM returns into 64-bit protected mode CS.L is already 1 and everything breaks. Luckily, CS.L=0 is always the case when executing RSM, because it is forbidden to execute RSM from 64-bit protected mode. Hence it is enough to load CR0 and CR4 first, and only then the segments. Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-14KVM: x86: fix previous commit for 32-bitPaolo Bonzini1-1/+1
Unfortunately I only noticed this after pushing. Fixes: f0d648bdf0a5bbc91da6099d5282f77996558ea4 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: fix SMI to halted VCPUPaolo Bonzini1-0/+3
An SMI to a halted VCPU must wake it up, hence a VCPU with a pending SMI must be considered runnable. Fixes: 64d6067057d9658acb8675afcfba549abdb7fc16 Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: clean up kvm_arch_vcpu_runnablePaolo Bonzini1-10/+29
Split the huge conditional in two functions. Fixes: 64d6067057d9658acb8675afcfba549abdb7fc16 Cc: stable@vger.kernel.org Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: map/unmap private slots in __x86_set_memory_regionPaolo Bonzini1-32/+30
Otherwise, two copies (one of them never populated and thus bogus) are allocated for the regular and SMM address spaces. This breaks SMM with EPT but without unrestricted guest support, because the SMM copy of the identity page map is all zeros. By moving the allocation to the caller we also remove the last vestiges of kernel-allocated memory regions (not accessible anymore in userspace since commit b74a07beed0e, "KVM: Remove kernel-allocated memory regions", 2010-06-21); that is a nice bonus. Reported-by: Alexandre DERUMIER <aderumier@odiso.com> Cc: stable@vger.kernel.org Fixes: 9da0e4d5ac969909f6b435ce28ea28135a9cbd69 Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: x86: build kvm_userspace_memory_region in x86_set_memory_regionPaolo Bonzini3-42/+21
The next patch will make x86_set_memory_region fill the userspace_addr. Since the struct is not used untouched anymore, it makes sense to build it in x86_set_memory_region directly; it also simplifies the callers. Reported-by: Alexandre DERUMIER <aderumier@odiso.com> Cc: stable@vger.kernel.org Fixes: 9da0e4d5ac969909f6b435ce28ea28135a9cbd69 Reviewed-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-13KVM: s390: factor out reading of the guest TOD clockDavid Hildenbrand3-15/+14
Let's factor this out and always use get_tod_clock_fast() when reading the guest TOD. STORE CLOCK FAST does not do serialization and, therefore, might result in some fuzziness between different processors in a way that subsequent calls on different CPUs might have time stamps that are earlier. This semantics is fine though for all KVM use cases. To make it obvious that the new function has STORE CLOCK FAST semantics we name it kvm_s390_get_tod_clock_fast. With this patch, we only have a handful of places were we have to care about STP sync (using preempt_disable() logic). Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: factor out and fix setting of guest TOD clockDavid Hildenbrand3-23/+21
Let's move that whole logic into one function. We now always use unsigned values when calculating the epoch (to avoid over/underflow defined). Also, we always have to get all VCPUs out of SIE before doing the update to avoid running differing VCPUs with different TODs. Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: switch to get_tod_clock() and fix STP sync racesDavid Hildenbrand2-20/+6
Nobody except early.c makes use of store_tod_clock() to handle the cc. So if we would get a cc != 0, we would be in more trouble. Let's replace all users with get_tod_clock(). Returning a cc on an ioctl sounded strange either way. We can now also easily move the get_tod_clock() call into the preempt_disable() section. This is in fact necessary to make the STP sync work as expected. Otherwise the host TOD could change and we would end up with a wrong epoch calculation. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: correctly handle injection of pgm irqs and per eventsDavid Hildenbrand1-1/+20
PER events can always co-exist with other program interrupts. For now, we always overwrite all program interrupt parameters when injecting any type of program interrupt. Let's handle that correctly by only overwriting the relevant portion of the program interrupt parameters. Therefore we can now inject PER events and ordinary program interrupts concurrently, resulting in no loss of program interrupts. This will especially by helpful when manually detecting PER events later - as both types might be triggered during one SIE exit. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: simplify in-kernel program irq injectionDavid Hildenbrand2-32/+20
The main reason to keep program injection in kernel separated until now was that we were able to do some checking, if really only the owning thread injects program interrupts (via waitqueue_active(li->wq)). This BUG_ON was never triggered and the chances of really hitting it, if another thread injected a program irq to another vcpu, were very small. Let's drop this check and turn kvm_s390_inject_program_int() and kvm_s390_inject_prog_irq() into simple inline functions that makes use of kvm_s390_inject_vcpu(). __must_check can be dropped as they are implicitely given by kvm_s390_inject_vcpu(), to avoid ugly long function prototypes. Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: drop out early in kvm_s390_has_irq()David Hildenbrand1-11/+9
Let's get rid of the local variable and exit directly if we found any pending interrupt. This is not only faster, but also better readable. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: kvm_arch_vcpu_runnable already cares about timer interruptsDavid Hildenbrand1-1/+1
We can remove that double check. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: set interception requests for all floating irqsDavid Hildenbrand1-12/+7
No need to separate pending and floating irqs when setting interception requests. Let's do it for all equally. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: disabled wait cares about machine checks, not PERDavid Hildenbrand1-5/+3
We don't care about program event recording irqs (synchronous program irqs) but asynchronous irqs when checking for disabled wait. Machine checks were missing. Let's directly switch to the functions we have for that purpose instead of testing once again for magic bits. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-13KVM: s390: remove unused variable in __inject_vmChristian Borntraeger1-3/+0
the float int structure is no longer used in __inject_vm. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-10-01iommu/vt-d: Add a command line parameter for VT-d posted-interruptsFeng Wu2-4/+9
Enable VT-d Posted-Interrtups and add a command line parameter for it. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Joerg Roedel <joro@8bytes.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Update Posted-Interrupts Descriptor when vCPU is blockedFeng Wu6-10/+206
This patch updates the Posted-Interrupts Descriptor when vCPU is blocked. pre-block: - Add the vCPU to the blocked per-CPU list - Set 'NV' to POSTED_INTR_WAKEUP_VECTOR post-block: - Remove the vCPU from the per-CPU list Signed-off-by: Feng Wu <feng.wu@intel.com> [Concentrate invocation of pre/post-block hooks to vcpu_block. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Update Posted-Interrupts Descriptor when vCPU is preemptedFeng Wu1-0/+80
This patch updates the Posted-Interrupts Descriptor when vCPU is preempted. sched out: - Set 'SN' to suppress furture non-urgent interrupts posted for the vCPU. sched in: - Clear 'SN' - Change NDST if vCPU is scheduled to a different CPU - Set 'NV' to POSTED_INTR_VECTOR Signed-off-by: Feng Wu <feng.wu@intel.com> [Include asm/cpu.h to fix !CONFIG_SMP compilation. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: select IRQ_BYPASS_MANAGERFeng Wu3-0/+56
Select IRQ_BYPASS_MANAGER for x86 when CONFIG_KVM is set Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: Update IRTE for posted-interruptsFeng Wu4-0/+121
This patch adds the routine to update IRTE for posted-interrupts when guest changes the interrupt configuration. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> [Squashed in automatically generated patch from the build robot "KVM: x86: vcpu_to_pi_desc() can be static" - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01vfio: Register/unregister irq_bypass_producerFeng Wu4-0/+13
This patch adds the registration/unregistration of an irq_bypass_producer for MSI/MSIx on vfio pci devices. Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: make kvm_set_msi_irq() publicFeng Wu2-2/+7
Make kvm_set_msi_irq() public, we can use this function outside. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Define a new interface kvm_intr_is_single_vcpu()Feng Wu4-0/+91
This patch defines a new interface kvm_intr_is_single_vcpu(), which can returns whether the interrupt is for single-CPU or not. It is used by VT-d PI, since now we only support single-CPU interrupts, For lowest-priority interrupts, if user configures it via /proc/irq or uses irqbalance to make it single-CPU, we can use PI to deliver the interrupts to it. Full functionality of lowest-priority support will be added later. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Add some helper functions for Posted-InterruptsFeng Wu1-0/+26
This patch adds some helper functions to manipulate the Posted-Interrupts Descriptor. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> [Make the new functions inline. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Extend struct pi_desc for VT-d Posted-InterruptsFeng Wu1-2/+18
Extend struct pi_desc for VT-d Posted-Interrupts. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: Add an arch specific hooks in 'struct kvm_kernel_irqfd'Feng Wu2-1/+20
This patch adds an arch specific hooks 'arch_update' in 'struct kvm_kernel_irqfd'. On Intel side, it is used to update the IRTE when VT-d posted-interrupts is used. Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: eventfd: add irq bypass consumer managementEric Auger2-0/+17
This patch adds the registration/unregistration of an irq_bypass_consumer on irqfd assignment/deassignment. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: introduce kvm_arch functions for IRQ bypassEric Auger3-0/+25
This patch introduces - kvm_arch_irq_bypass_add_producer - kvm_arch_irq_bypass_del_producer - kvm_arch_irq_bypass_stop - kvm_arch_irq_bypass_start They make possible to specialize the KVM IRQ bypass consumer in case CONFIG_KVM_HAVE_IRQ_BYPASS is set. Signed-off-by: Eric Auger <eric.auger@linaro.org> [Add weak implementations of the callbacks. - Feng] Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: create kvm_irqfd.hEric Auger2-72/+92
Move _irqfd_resampler and _irqfd struct declarations in a new public header: kvm_irqfd.h. They are respectively renamed into kvm_kernel_irqfd_resampler and kvm_kernel_irqfd. Those datatypes will be used by architecture specific code, in the context of IRQ bypass manager integration. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Feng Wu <feng.wu@intel.com> Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01virt: Add virt directory to the top MakefileFeng Wu2-4/+7
We need to build files in virt/lib/, which are now used by KVM and VFIO, so add virt directory to the top Makefile. Signed-off-by: Feng Wu <feng.wu@intel.com> Acked-by: Michal Marek <mmarek@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01virt: IRQ bypass managerAlex Williamson5-0/+357
When a physical I/O device is assigned to a virtual machine through facilities like VFIO and KVM, the interrupt for the device generally bounces through the host system before being injected into the VM. However, hardware technologies exist that often allow the host to be bypassed for some of these scenarios. Intel Posted Interrupts allow the specified physical edge interrupts to be directly injected into a guest when delivered to a physical processor while the vCPU is running. ARM IRQ Forwarding allows forwarded physical interrupts to be directly deactivated by the guest. The IRQ bypass manager here is meant to provide the shim to connect interrupt producers, generally the host physical device driver, with interrupt consumers, generally the hypervisor, in order to configure these bypass mechanism. To do this, we base the connection on a shared, opaque token. For KVM-VFIO this is expected to be an eventfd_ctx since this is the connection we already use to connect an eventfd to an irqfd on the in-kernel path. When a producer and consumer with matching tokens is found, callbacks via both registered participants allow the bypass facilities to be automatically enabled. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Eric Auger <eric.auger@linaro.org> Tested-by: Eric Auger <eric.auger@linaro.org> Tested-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01irq_remapping: move structs outside #ifdefPaolo Bonzini1-5/+5
This is friendlier to clients of the code, who are going to prepare vcpu_data structs unconditionally, even if CONFIG_IRQ_REMAP is not defined. Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01x86: kvmclock: abolish PVCLOCK_COUNTS_FROM_ZERORadim Krčmář1-11/+35
Newer KVM won't be exposing PVCLOCK_COUNTS_FROM_ZERO anymore. The purpose of that flags was to start counting system time from 0 when the KVM clock has been initialized. We can achieve the same by selecting one read as the initial point. A simple subtraction will work unless the KVM clock count overflows earlier (has smaller width) than scheduler's cycle count. We should be safe till x86_128. Because PVCLOCK_COUNTS_FROM_ZERO was enabled only on new hypervisors, setting sched clock as stable based on PVCLOCK_TSC_STABLE_BIT might regress on older ones. I presume we don't need to change kvm_clock_read instead of introducing kvm_sched_clock_read. A problem could arise in case sched_clock is expected to return the same value as get_cycles, but we should have merged those clocks in that case. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Acked-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: drop rdtscp_enabled fieldXiao Guangrong2-11/+14
Check cpuid bit instead of it Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: clean up bit operation on SECONDARY_VM_EXEC_CONTROLXiao Guangrong1-17/+6
Use vmcs_set_bits() and vmcs_clear_bits() to clean up the code Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: unify SECONDARY_VM_EXEC_CONTROL updateXiao Guangrong1-10/+25
Unify the update in vmx_cpuid_update() Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> [Rewrite to use vmcs_set_secondary_exec_control. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: align vmx->nested.nested_vmx_secondary_ctls_high to vmx->rdtscp_enabledPaolo Bonzini1-3/+8
The SECONDARY_EXEC_RDTSCP must be available iff RDTSCP is enabled in the guest. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: simplify invpcid handling in vmx_cpuid_update()Xiao Guangrong1-12/+5
If vmx_invpcid_supported() is true, second execution control filed must be supported and SECONDARY_EXEC_ENABLE_INVPCID must have already been set in current vmcs by vmx_secondary_exec_control() If vmx_invpcid_supported() is false, no need to clear SECONDARY_EXEC_ENABLE_INVPCID Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: simplify rdtscp handling in vmx_cpuid_update()Xiao Guangrong1-9/+8
if vmx_rdtscp_supported() is true SECONDARY_EXEC_RDTSCP must have already been set in current vmcs by vmx_secondary_exec_control() Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: VMX: drop rdtscp_enabled check in prepare_vmcs02()Xiao Guangrong1-2/+1
SECONDARY_EXEC_RDTSCP set for L2 guest comes from vmcs12 Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: add pcommit supportXiao Guangrong5-8/+42
Pass PCOMMIT CPU feature to guest to enable PCOMMIT instruction Currently we do not catch pcommit instruction for L1 guest and allow L1 to catch this instruction for L2 if, as required by the spec, L1 can enumerate the PCOMMIT instruction via CPUID: | IA32_VMX_PROCBASED_CTLS2[53] (which enumerates support for the | 1-setting of PCOMMIT exiting) is always the same as | CPUID.07H:EBX.PCOMMIT[bit 22]. Thus, software can set PCOMMIT exiting | to 1 if and only if the PCOMMIT instruction is enumerated via CPUID The spec can be found at https://software.intel.com/sites/default/files/managed/0d/53/319433-022.pdf Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-01KVM: x86: allow guest to use cflushopt and clwbXiao Guangrong1-1/+1
Pass these CPU features to guest to enable them in guest They are needed by nvdimm drivers Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.